-
Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter
Authors:
M. Aamir,
B. Acar,
G. Adamov,
T. Adams,
C. Adloff,
S. Afanasiev,
C. Agrawal,
C. Agrawal,
A. Ahmad,
H. A. Ahmed,
S. Akbar,
N. Akchurin,
B. Akgul,
B. Akgun,
R. O. Akpinar,
E. Aktas,
A. AlKadhim,
V. Alexakhin,
J. Alimena,
J. Alison,
A. Alpana,
W. Alshehri,
P. Alvarez Dominguez,
M. Alyari,
C. Amendola
, et al. (550 additional authors not shown)
Abstract:
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr…
▽ More
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated.
△ Less
Submitted 30 June, 2024; v1 submitted 17 June, 2024;
originally announced June 2024.
-
Expected Performance of Cosmic Muon Veto Detector
Authors:
Raj Shah,
Gobinda Majumder
Abstract:
The India-Based Neutrino Observatory (INO) collaboration houses the miniICAL detector, at the transit campus of IICHEP, Madurai, India, which serves as a prototype-detector of the larger Iron-Calorimeter detector (ICAL). The purpose of miniICAL lies in unraveling the intricate engineering challenges inherent in constructing a substantial ICAL-type detector. To explore the feasibility of building a…
▽ More
The India-Based Neutrino Observatory (INO) collaboration houses the miniICAL detector, at the transit campus of IICHEP, Madurai, India, which serves as a prototype-detector of the larger Iron-Calorimeter detector (ICAL). The purpose of miniICAL lies in unraveling the intricate engineering challenges inherent in constructing a substantial ICAL-type detector. To explore the feasibility of building a large-scale neutrino experiment at shallow depths the collaboration has embarked upon the construction of a Cosmic Muon Veto Detector (CMVD) around the miniICAL detector. The primary objective of this endeavor revolves around attaining a veto efficiency surpassing $99.99\%$, while simultaneously maintaining a false-positive rate lower than $10^{-5}$.
The CMVD system is based on extruded plastic scintillators (EPS) and utilizes wavelength-shifting fibers to collect scintillation photons and uses silicon photomultipliers (SiPMs) as photo-transducers. The expected performance of the CMVD is estimated using simulated muon tracks in the miniICAL stack taking into account efficiency, multiplicity of RPC detectors from the miniICAL data as well as the noise of SiPM, observed SiPM spectra and time resolution due to cosmic muon along the whole length of EPS etc.
The CMVD experiment is a crucial step in the larger context of neutrino research, by increasing the veto efficiency of cosmic muons, the CMVD experiment helps to pave the way for future large-scale shallow-depth neutrino experiments, providing valuable insights into the study of neutrinos and their properties.
△ Less
Submitted 10 March, 2024;
originally announced March 2024.
-
Simulation of RPC responses in mini-Iron Calorimeter for cosmic ray muon studies
Authors:
J. M. John,
G. Majumder,
S. Pethuraj
Abstract:
A Prototype of the Iron Calorimeter for the India-based Neutrino Observatory is currently running in Madurai, India. This consists of twenty large area single gap Resistive Plate Chambers (RPCs) of size, $\sim$ 185\,cm $\times$ 175\,cm sandwiched between 11 layers of iron plates of thickness 5.6\,cm. The total size of the mini-Iron Calorimeter(mini-ICAL) is 4\,m$\times$4\,m$\times$1.2\,m and havin…
▽ More
A Prototype of the Iron Calorimeter for the India-based Neutrino Observatory is currently running in Madurai, India. This consists of twenty large area single gap Resistive Plate Chambers (RPCs) of size, $\sim$ 185\,cm $\times$ 175\,cm sandwiched between 11 layers of iron plates of thickness 5.6\,cm. The total size of the mini-Iron Calorimeter(mini-ICAL) is 4\,m$\times$4\,m$\times$1.2\,m and having a weight of 85\,tons is a (1/600) scaled-down version of the ICAL detector of INO~\cite{ichep2018}. The detector is magnetized using iron plates and two sets of copper coils, each coil has 18 turns. The central region of the mini-ICAL, where the RPCs are placed, has a nearly uniform magnetic field of 1.4\,T, similar to the magnetic field in the final ICAL detector. This prototype serves as the basis for the design of the demonstrators, which closely mimics the characteristics of a future ICAL. This detector is built to test the final electronics in the fringe field of the magnet and also to develop the experience to construct the ICAL detector.
The mini-ICAL has been operational since 2018 and collects cosmic muon data with different configurations of RPC, and electronics, which are continuously changing for various R\&D efforts. Dedicated efforts are made in parallel to measure the momentum and azimuthal angle of $μ^+$ and $μ^-$ independently, which could be an important input to the cosmic neutrino event generators. To improve the precision of those measurements a dedicated simulation effort was made, particularly in the digitisation of the RPC signal for a real detector simulation, where efficiency, noise rate, strip multiplicity, etc. were matched with the real data collected during runs at mini-ICAL.
△ Less
Submitted 3 December, 2023; v1 submitted 2 September, 2023;
originally announced September 2023.
-
Design, fabrication and large scale qualification of cosmic muon veto scintillator detectors
Authors:
Mandar Saraf,
Pandi Raj Chinnappan,
Aditya Deodhar,
Mamta Jangra,
J. Krishnamoorthi,
Gobinda Majumder,
Veera Padmavathy,
K. C. Ravindran,
Raj Bhupen Shah,
Ravindra Shinde,
B. Satyanarayana
Abstract:
The INO collaboration is designing a cosmic muon veto detector (CMVD) to cover the mini-ICAL detector which is operational at the IICHEP transit campus, Madurai in South India. The aim of the CMVD is to study the feasibility of building an experiment to record rare events at a shallow depth of around 100 m, and use plastic scintillators to veto atmospheric muons from those produced by the rare int…
▽ More
The INO collaboration is designing a cosmic muon veto detector (CMVD) to cover the mini-ICAL detector which is operational at the IICHEP transit campus, Madurai in South India. The aim of the CMVD is to study the feasibility of building an experiment to record rare events at a shallow depth of around 100 m, and use plastic scintillators to veto atmospheric muons from those produced by the rare interactions within the target mass of the detector. The efficiency of such a veto detector should be better than 99.99% and false positive rate of less than $10^{-5}$.
The CMVD is being built using extruded plastic scintillator (EPS) strips to detect and tag atmospheric muons. More than 700 EPS strips are required to build the CMVD. Two EPS strips are pasted together to make a di-counter (DC) and wavelength shifting fibres are embedded inside the EPS strips to trap the scintillation light generated by a passing cosmic ray muon and transmit it as secondary photons to the Silicon Photo-Multipliers (SiPMs) mounted at the two ends of the DCs. Since the efficiency requirement of the veto detector is rather high, it is imperative to thoroughly test each and every component used for building the CMVD. A cosmic ray muon telescope has been setup using the DCs to qualify all the DCs that will be fabricated. In this paper we will discuss the details of the design and fabrication of the DCs, and the cosmic muon setup and the electronics used for their testing and the test results.
△ Less
Submitted 4 May, 2023; v1 submitted 29 January, 2023;
originally announced January 2023.
-
Mass testing of SiPMs for the CMVD at IICHEP
Authors:
Mamta Jangra,
Raj Bhupen,
Gobinda Majumder,
Kiran Gothe,
Mandar Saraf,
Nandkishor Parmar,
B. Satyanarayana,
R. R. Shinde,
Shobha K. Rao,
Suresh S Upadhya,
Vivek M Datar,
Douglas A. Glenzinski,
Alan Bross,
Anna Pla-Dalmau,
Vishnu V. Zutshi,
Robert Craig Group,
E Craig Dukes
Abstract:
A Cosmic Muon Veto Detector (CMVD) is being built around the mini-Iron Calorimeter (mini-ICAL) detector at the transit campus of the India based Neutrino Observatory, Madurai. The CMV detector will be made using extruded plastic scintillators with embedded wavelength shifting (WLS) fibres which propagate re-emitted photons of longer wavelengths to silicon photo-multipliers (SiPMs). The SiPMs detec…
▽ More
A Cosmic Muon Veto Detector (CMVD) is being built around the mini-Iron Calorimeter (mini-ICAL) detector at the transit campus of the India based Neutrino Observatory, Madurai. The CMV detector will be made using extruded plastic scintillators with embedded wavelength shifting (WLS) fibres which propagate re-emitted photons of longer wavelengths to silicon photo-multipliers (SiPMs). The SiPMs detect these scintillation photons, producing electronic signals. The design goal for the cosmic muon veto efficiency of the CMV is $>$99.99\% and fake veto rate less than 10$^{-5}$. A testing system was developed, using an LED driver, to measure the noise rate and gain of each SiPM, and thus determine its overvoltage ($V_{ov}$). This paper describes the test results and the analysed characteristics of about 3.5k SiPMs.
△ Less
Submitted 21 October, 2022; v1 submitted 24 August, 2022;
originally announced August 2022.
-
Optimisation of Operating High Voltage of the large area Resistive Plate Chamber for ICAL experiment
Authors:
S. Pethuraj,
G. Majumder,
K. C. Ravindran,
B. Satyanarayana,
Umesh L
Abstract:
The Resistive Plate Chamber is a widely used detector in high energy physics. The operating potential of this chamber is determined by the optimisation of the efficiency and noise rate of the device. This optimisation is based on the assumption that the performance of the device over the whole surface area is uniform. The INO-ICAL experiment is going to use $\sim$ 30000 RPC of size $\sim$2\,m…
▽ More
The Resistive Plate Chamber is a widely used detector in high energy physics. The operating potential of this chamber is determined by the optimisation of the efficiency and noise rate of the device. This optimisation is based on the assumption that the performance of the device over the whole surface area is uniform. The INO-ICAL experiment is going to use $\sim$ 30000 RPC of size $\sim$2\,m$\times$2\,m. All the RPC will have to pass a minimum quality assurance criteria, but may not be able to maintain a good uniformity over the whole surface area, particularly for the whole running period of about twenty years. This paper describes the choice of the optimum operating HV for an RPC of non-uniform response.
△ Less
Submitted 4 April, 2022;
originally announced April 2022.
-
Qualification study of SiPMs on a large scale for the CMVD Experiment
Authors:
Mamta Jangra,
Raj Bhupen,
Gobinda Majumder,
Kiran Gothe,
Mandar Saraf,
Nandkishor Parmar,
B. Satyanarayana,
R. R. Shinde,
Shobha K. Rao,
Suresh S Upadhya,
Vivek M Datar,
Douglas A. Glenzinski,
Alan Bross,
Anna Pla-Dalmau,
Vishnu V. Zutshi,
Robert Craig Group,
E Craig Dukes
Abstract:
A Cosmic Muon Veto (CMV) detector using extruded plastic scintillators is being designed around the mini-Iron Calorimeter (mini-ICAL) detector at the transit campus of the India based Neutrino Observatory, Madurai for the feasibility study of shallow depth underground experiments. The scintillation signals that are produced in the plastic due to muon trajectories are absorbed by wavelength shiftin…
▽ More
A Cosmic Muon Veto (CMV) detector using extruded plastic scintillators is being designed around the mini-Iron Calorimeter (mini-ICAL) detector at the transit campus of the India based Neutrino Observatory, Madurai for the feasibility study of shallow depth underground experiments. The scintillation signals that are produced in the plastic due to muon trajectories are absorbed by wavelength shifting (WLS) fibres. The WLS fibres re-emit photons of longer wavelengths and propagate those to silicon photo-multipliers (SiPMs). The SiPMs detect these photons, producing electronic signals. The CMV detector will use more than 700 scintillators to cover the mini-ICAL detector and will require around 3000 SiPMs. The design goal for the cosmic muon veto efficiency of the CMV is >99.99%. Hence, every SiPM used in the detector needs to be tested and characterised to satisfy the design goal of CMV. A mass testing system was developed for the measurement of gain and choice of the overvoltage ($V_{ov}$) of each SiPMs using an LED driver. The $V_{ov}$ is obtained by studying the noise rate, the gain of the SiPM. This paper describes the experimental setup used to test the SiPMs characteristics along with detailed studies of those characteristics as a function of temperature.
△ Less
Submitted 31 March, 2022;
originally announced March 2022.
-
Improving Time and Position Resolution of RPC detectors using Time Over Threshold Information
Authors:
Jim M John,
S. Pethuraj,
G. Majumder,
K. C. Ravindran,
V. M. Datar,
B. Satyanarayana
Abstract:
INO-ICAL is a proposed underground particle physics experiment to study the neutrino oscillation parameters by detecting neutrinos produced in the atmospheric air showers. Iron CALorimeter (ICAL) is to have 151 layers of iron stacked vertically, with active detector elements in between the iron layers. The iron layers will be magnetized to enable the measurement of momentum and charge of the…
▽ More
INO-ICAL is a proposed underground particle physics experiment to study the neutrino oscillation parameters by detecting neutrinos produced in the atmospheric air showers. Iron CALorimeter (ICAL) is to have 151 layers of iron stacked vertically, with active detector elements in between the iron layers. The iron layers will be magnetized to enable the measurement of momentum and charge of the $μ^-$ (or $μ^+$) produced by $ν_μ$ (or $\barν_μ$) interactions. Resistive Plate Chambers (RPCs) have been chosen as the active detector elements due to their large area coverage, uncompromised sensitivity, consistent performance for decades, as well as cost effectiveness. The major factors that decide the physics potential of the ICAL experiment are efficiency, position resolution and time resolution of the large area RPCs. A prototype detector called miniICAL (with 11 iron layers) was commissioned to understand the engineering challenges in building the large scale magnet and its ancillary systems, and also to study the performance of the RPC detectors and readout electronics developed by the INO collaboration. As part of the performance study of the RPC detectors, an attempt is made to improve the position and time resolution of them. Even a small improvement in the position and time resolution will help to improve the measurements of momentum and directionality of the neutrinos in ICAL. The Time-over-Threshold (ToT) of the RPC pulses (signals) is recorded by the readout electronics. ToT is a measure of the pulse width and consequently the amplitude. This information is used to improve the time and position resolution of the RPCs and consequently INO physics potential.
△ Less
Submitted 15 November, 2023; v1 submitted 23 January, 2022;
originally announced January 2022.
-
CL-NERIL: A Cross-Lingual Model for NER in Indian Languages
Authors:
Akshara Prabhakar,
Gouri Sankar Majumder,
Ashish Anand
Abstract:
Develo** Named Entity Recognition (NER) systems for Indian languages has been a long-standing challenge, mainly owing to the requirement of a large amount of annotated clean training instances. This paper proposes an end-to-end framework for NER for Indian languages in a low-resource setting by exploiting parallel corpora of English and Indian languages and an English NER dataset. The proposed f…
▽ More
Develo** Named Entity Recognition (NER) systems for Indian languages has been a long-standing challenge, mainly owing to the requirement of a large amount of annotated clean training instances. This paper proposes an end-to-end framework for NER for Indian languages in a low-resource setting by exploiting parallel corpora of English and Indian languages and an English NER dataset. The proposed framework includes an annotation projection method that combines word alignment score and NER tag prediction confidence score on source language (English) data to generate weakly labeled data in a target Indian language. We employ a variant of the Teacher-Student model and optimize it jointly on the pseudo labels of the Teacher model and predictions on the generated weakly labeled data. We also present manually annotated test sets for three Indian languages: Hindi, Bengali, and Gujarati. We evaluate the performance of the proposed framework on the test sets of the three Indian languages. Empirical results show a minimum 10% performance improvement compared to the zero-shot transfer learning model on all languages. This indicates that weakly labeled data generated using the proposed annotation projection method in target Indian languages can complement well-annotated source language data to enhance performance. Our code is publicly available at https://github.com/aksh555/CL-NERIL
△ Less
Submitted 23 November, 2021;
originally announced November 2021.
-
Characterization of Silicon-Photomultipliers for a Cosmic Muon Veto detector
Authors:
Mamta Jangra,
Gobinda Majumder,
Mandar Saraf,
B. Satyanarayana,
R. R. Shinde,
Suresh S Upadhya,
Vivek M Datar,
Douglas A. Glenzinski,
Alan Bross,
Anna Pla-Dalmau,
Vishnu V. Zutshi,
Robert Craig Group,
E Craig Dukes
Abstract:
A Cosmic Muon Veto (CMV) detector using extruded scintillators is being designed around the mini-Iron Calorimeter detector at the transit campus of the India-based Neutrino Observatory at Madurai for measuring its efficiency at shallow depth underground experiments. The scintillation signal is transmitted through a Wavelength Shifting (WLS) fibre and readout by Hamamatsu Silicon-Photomultipliers (…
▽ More
A Cosmic Muon Veto (CMV) detector using extruded scintillators is being designed around the mini-Iron Calorimeter detector at the transit campus of the India-based Neutrino Observatory at Madurai for measuring its efficiency at shallow depth underground experiments. The scintillation signal is transmitted through a Wavelength Shifting (WLS) fibre and readout by Hamamatsu Silicon-Photomultipliers (SiPMs). A Light Emitting Diode (LED) system is included on the front-end readout for in-situ calibration of the gain of each SiPM. A characterization system was developed for the measurement of gain and choice of the overvoltage (Vov) of SiPMs using LED as well as a cosmic muon telescope. The Vov is obtained by studying the noise rate, the gain of the SiPM, and the muon detection efficiency. In case of any malfunction of the LED system during the operation, the SiPM can also be calibrated with the noise data as well as using radioactive sources. This paper describes the basic characteristics of the SiPM and the comparison of the calibration results using all three methods, as well as the Vov of the SiPMs and muon selection criteria for the veto detector.
△ Less
Submitted 19 August, 2021; v1 submitted 12 August, 2021;
originally announced August 2021.
-
Study of Particle Multiplicity of Cosmic Ray Events using 2m$\times$2m Resistive Plate Chamber Stack at IICHEP-Madurai
Authors:
Suryanarayan Mondal,
V. M. Datar,
Gobinda Majumder,
N. K. Mondal,
S. Pethuraj,
K. C. Ravindran,
B. Satyanarayana
Abstract:
An experimental setup consisting of 12 layers of glass Resistive Plate Chambers (RPCs) of size 2\,m\,$\times$\,2\,m has been built at IICHEP-Madurai (\ang{9;56;14.5}\,N \ang{78;00;47.9}\,E, on the surface) to study the long term performance and stability of RPCs produced on large scale in Indian industry. This setup has been collecting data triggered by the passage of charged particles. The measur…
▽ More
An experimental setup consisting of 12 layers of glass Resistive Plate Chambers (RPCs) of size 2\,m\,$\times$\,2\,m has been built at IICHEP-Madurai (\ang{9;56;14.5}\,N \ang{78;00;47.9}\,E, on the surface) to study the long term performance and stability of RPCs produced on large scale in Indian industry. This setup has been collecting data triggered by the passage of charged particles. The measurement of the multiplicity of charged particles due to cosmic ray interactions are presented here. Finally, the results are compared with different hadronic models of the CORSIKA simulation.
△ Less
Submitted 11 December, 2020; v1 submitted 13 August, 2019;
originally announced August 2019.
-
Development and characterization of six-gap glass MRPCs and feasibility study of a PET device
Authors:
M. Nizam,
B. Satyanarayana,
R. R. Shinde,
G. Majumder
Abstract:
The Multigap Resistive Plate Chambers (MRPCs) provide excellent timing as well as position resolutions at relatively low cost. Therefore, they can be used in medical imaging applications such as PET where precise timing is a crucial parameter of measurement. We have designed and fabricated several six-gap glass MRPCs and extensively studied their performance. In this paper, we describe the fabrica…
▽ More
The Multigap Resistive Plate Chambers (MRPCs) provide excellent timing as well as position resolutions at relatively low cost. Therefore, they can be used in medical imaging applications such as PET where precise timing is a crucial parameter of measurement. We have designed and fabricated several six-gap glass MRPCs and extensively studied their performance. In this paper, we describe the fabrication and characterization of the detector, the electronics and the data acquisition system of the setup. We present here the result of our Time Of Flight (TOF) experiment using a radioactive source Na-22 hence to demonstrate their potential applications in medical imaging. We also present the Geant4 based simulation results on the efficiency of our detector as a function of the number of gaps and thickness of the converter material.
△ Less
Submitted 22 July, 2019;
originally announced July 2019.
-
Measurement of azimuthal dependent muon flux by 2\,m\,$\times$\,2\,m RPC stack at IICHEP-Madurai
Authors:
S. Pethuraj,
G. Majumder,
V. M. Datar,
N. K. Mondal,
K. C. Ravindran,
B. Satyanarayana
Abstract:
The proposed 50 \,kton\, INO-ICAL experiment is an upcoming underground high energy physics experiment planned to be commissioned at Bodi hills near Theni, India ($9^{\circ}57'N$, $77^{\circ}16'E$) to study various properties of neutrino oscillations using atmospheric neutrinos produced by extensive air shower phenomenon. The resistive plate chamber has been chosen as the active detector element f…
▽ More
The proposed 50 \,kton\, INO-ICAL experiment is an upcoming underground high energy physics experiment planned to be commissioned at Bodi hills near Theni, India ($9^{\circ}57'N$, $77^{\circ}16'E$) to study various properties of neutrino oscillations using atmospheric neutrinos produced by extensive air shower phenomenon. The resistive plate chamber has been chosen as the active detector element for the proposed INO-ICAL. An experimental setup consisting a stack of 12 layers of glass resistive plate chambers each with a size of $\sim$2\,m$\times$2\,m has been built at IICHEP, Madurai to study the performance and long-term stability of the resistive plate chambers(RPCs) commercially produced in large quantities by the Indian industries as well as its electronics for the front-end and subsequent signal processing. In this study, the azimuthal dependence of muon flux at various zenith angles at Madurai (9$^{\circ}$56'N, 78$^{\circ}$00'E and at an altitude of 160\,m above mean sea level) has been presented along with the comparison of Monte Carlo from CORSIKA and HONDA predictions.
△ Less
Submitted 11 March, 2020; v1 submitted 1 May, 2019;
originally announced May 2019.
-
Standard Model Physics at the HL-LHC and HE-LHC
Authors:
P. Azzi,
S. Farry,
P. Nason,
A. Tricoli,
D. Zeppenfeld,
R. Abdul Khalek,
J. Alimena,
N. Andari,
L. Aperio Bella,
A. J. Armbruster,
J. Baglio,
S. Bailey,
E. Bakos,
A. Bakshi,
C. Baldenegro,
F. Balli,
A. Barker,
W. Barter,
J. de Blas,
F. Blekman,
D. Bloch,
A. Bodek,
M. Boonekamp,
E. Boos,
J. D. Bossio Sola
, et al. (201 additional authors not shown)
Abstract:
The successful operation of the Large Hadron Collider (LHC) and the excellent performance of the ATLAS, CMS, LHCb and ALICE detectors in Run-1 and Run-2 with $pp$ collisions at center-of-mass energies of 7, 8 and 13 TeV as well as the giant leap in precision calculations and modeling of fundamental interactions at hadron colliders have allowed an extraordinary breadth of physics studies including…
▽ More
The successful operation of the Large Hadron Collider (LHC) and the excellent performance of the ATLAS, CMS, LHCb and ALICE detectors in Run-1 and Run-2 with $pp$ collisions at center-of-mass energies of 7, 8 and 13 TeV as well as the giant leap in precision calculations and modeling of fundamental interactions at hadron colliders have allowed an extraordinary breadth of physics studies including precision measurements of a variety physics processes. The LHC results have so far confirmed the validity of the Standard Model of particle physics up to unprecedented energy scales and with great precision in the sectors of strong and electroweak interactions as well as flavour physics, for instance in top quark physics. The upgrade of the LHC to a High Luminosity phase (HL-LHC) at 14 TeV center-of-mass energy with 3 ab$^{-1}$ of integrated luminosity will probe the Standard Model with even greater precision and will extend the sensitivity to possible anomalies in the Standard Model, thanks to a ten-fold larger data set, upgraded detectors and expected improvements in the theoretical understanding. This document summarises the physics reach of the HL-LHC in the realm of strong and electroweak interactions and top quark physics, and provides a glimpse of the potential of a possible further upgrade of the LHC to a 27 TeV $pp$ collider, the High-Energy LHC (HE-LHC), assumed to accumulate an integrated luminosity of 15 ab$^{-1}$.
△ Less
Submitted 20 December, 2019; v1 submitted 11 February, 2019;
originally announced February 2019.
-
Leak Test of Resistive Plate Chamber Gap by Monitoring Absolute Pressure
Authors:
Suryanarayan Mondal,
V. M. Datar,
Gobinda Majumder,
N. K. Mondal,
K. C. Ravindran,
B. Satyanarayana
Abstract:
The India-based Neutrino Observatory Project (INO) is a proposed underground high energy physics experiment at Theni, India to study the neutrino oscillation parameters using atmospheric neutrinos. The 50 kton magnetised INO-ICAL detector will require approximately 30,000 of 2m$\times$2m Resistive Plate Chambers (RPC) as sensitive detectors and proposed to operate for about 20 years. For success o…
▽ More
The India-based Neutrino Observatory Project (INO) is a proposed underground high energy physics experiment at Theni, India to study the neutrino oscillation parameters using atmospheric neutrinos. The 50 kton magnetised INO-ICAL detector will require approximately 30,000 of 2m$\times$2m Resistive Plate Chambers (RPC) as sensitive detectors and proposed to operate for about 20 years. For success of the experiment, each of the RPCs has to function without showing any significant aging during the period of operation. Hence, various tests including a proper leak test are performed during and after production. The methods of leak rate calculation using conventional manometer are valid only when both the volume of the test subject and ambient pressure are kept constant. But both these quantities for a RPC gas gap depend widely on the ambient pressure and temperature. A proper quantitative estimation of the leak rate cannot be acquired from such pressure measurements. By monitoring the absolute pressures, both outside and inside of an RPC, along with the temperature, its leakage rate can be estimated. During the test period, the supporting button spacers inside an RPC may get detached due to manufacturing defect. This effect also needs to be detected.
△ Less
Submitted 17 April, 2019; v1 submitted 1 December, 2018;
originally announced December 2018.
-
Simulation of muon-induced neutral particle background for a shallow depth Iron Calorimeter detector
Authors:
Neha Panchal,
G. Majumder,
V. M. Datar
Abstract:
The Iron Calorimeter (ICAL) detector at the India based Neutrino Observatory (INO) is planned to be set up in an underground cavern with a rock overburden of more than 1 km. This overburden reduces the cosmic muon flux by a factor of 10$^{6}$ with respect to that at sea level. In this paper, we examine the possibility of a 100 m shallow depth ICAL (SICAL) detector. The cosmic muons would have to b…
▽ More
The Iron Calorimeter (ICAL) detector at the India based Neutrino Observatory (INO) is planned to be set up in an underground cavern with a rock overburden of more than 1 km. This overburden reduces the cosmic muon flux by a factor of 10$^{6}$ with respect to that at sea level. In this paper, we examine the possibility of a 100 m shallow depth ICAL (SICAL) detector. The cosmic muons would have to be detected in a veto detector surrounding ICAL with an efficiency of 99.99 % in order to have the same level of muon background leaking undetected through the veto detector as at the 1 km depth underground site. However, an additional background arises from interactions of cosmic muons with the rock. Since the neutral particles produced in such interactions can pass through the veto detector without any interaction, they can possibly mimic neutrino events in ICAL. In this paper, the results of a GEANT4 based simulation study to estimate the background signals due to muon induced interactions with the rock for SICAL are presented.
△ Less
Submitted 9 March, 2019; v1 submitted 24 September, 2018;
originally announced September 2018.
-
A compact cosmic muon veto detector and possible use with the Iron Calorimeter detector for neutrinos
Authors:
Neha Panchal,
S. Mohanraj,
A. Kumar,
T. Dey,
G. Majumder,
R. Shinde,
P. Verma,
B. Satyanarayana,
V. M. Datar
Abstract:
The motivation for a cosmic muon veto (CMV) detector is to explore the possibility of locating the proposed large Iron Calorimeter (ICAL) detector at the India based Neutrino Observatory (INO) at a shallow depth. An initial effort in that direction, through the assembly and testing of a $\sim$ 1 m $\times$ 1 m $\times$ 0.3 m plastic scintillator based detector, is described. The plan for making a…
▽ More
The motivation for a cosmic muon veto (CMV) detector is to explore the possibility of locating the proposed large Iron Calorimeter (ICAL) detector at the India based Neutrino Observatory (INO) at a shallow depth. An initial effort in that direction, through the assembly and testing of a $\sim$ 1 m $\times$ 1 m $\times$ 0.3 m plastic scintillator based detector, is described. The plan for making a CMV detector for a smaller prototype mini-ICAL is also outlined.
△ Less
Submitted 27 February, 2019; v1 submitted 29 August, 2017;
originally announced August 2017.
-
Measurement of Cosmic Muon angular distribution and vertical integrated flux by 2m$\times$2m RPC stack at IICHEP-Madurai
Authors:
S. Pethuraj,
V. M. Datar,
G. Majumder,
N. K. Mondal,
K. C. Ravindran,
B. Satyanarayana
Abstract:
The 50 \,kton\, INO-ICAL is a proposed underground high energy physics experiment at Theni, India ($9^{\circ}57'N$, $77^{\circ}16'E$) to study the neutrino oscillation parameters using atmospheric neutrinos. The Resistive Plate Chamber (RPC) has been chosen as the active detector element for the ICAL detector. An experimental setup consisting of 12 layers of glass RPCs of size 2\,m\,$\times$\,2\,m…
▽ More
The 50 \,kton\, INO-ICAL is a proposed underground high energy physics experiment at Theni, India ($9^{\circ}57'N$, $77^{\circ}16'E$) to study the neutrino oscillation parameters using atmospheric neutrinos. The Resistive Plate Chamber (RPC) has been chosen as the active detector element for the ICAL detector. An experimental setup consisting of 12 layers of glass RPCs of size 2\,m\,$\times$\,2\,m has been built at IICHEP, Madurai to study the long term stability and performance of RPCs which are produced on a large scale in Indian industry. In this paper, the studies on the performance of RPCs are presented along with the angular distribution of muons at Madurai ($9^{\circ}56'N,78^{\circ}00'E$ and Altitude $\approx$\,160\,m from sea level).
△ Less
Submitted 3 June, 2017;
originally announced June 2017.
-
Simulation study of energy resolution, position resolution and $π^0$-$γ$ separation of a sampling electromagnetic calorimeter at high energies
Authors:
Ashim Roy,
Shilpi Jain,
Sunanda Banerjee,
Satyaki Bhattacharya,
Gobinda Majumder
Abstract:
A simulation study of energy resolution, position resolution, and $π^0$-$γ$ separation using multivariate methods of a sampling calorimeter is presented. As a realistic example, the geometry of the calorimeter is taken from the design geometry of the Shashlik calorimeter which was considered as a candidate for CMS endcap for the phase II of LHC running. The methods proposed in this paper can be ea…
▽ More
A simulation study of energy resolution, position resolution, and $π^0$-$γ$ separation using multivariate methods of a sampling calorimeter is presented. As a realistic example, the geometry of the calorimeter is taken from the design geometry of the Shashlik calorimeter which was considered as a candidate for CMS endcap for the phase II of LHC running. The methods proposed in this paper can be easily adapted to various geometrical layouts of a sampling calorimeter. Energy resolution is studied for different layouts and different absorber-scintillator combinations of the Shashlik detector. It is shown that a boosted decision tree using fine grained information of the calorimeter can perform three times better than a cut-based method for separation of $π^0$ from $γ$ over a large energy range of 20 GeV-200 GeV.
△ Less
Submitted 21 June, 2017; v1 submitted 15 March, 2017;
originally announced March 2017.
-
Drude weight in hard core Boson systems: possibility of a finite temperature ideal conductor
Authors:
Gourab Majumder,
Arti Garg
Abstract:
We calculate the Drude weight in the superfluid (SF) and the supersolid (SS) phases of hard core boson (HCB) model using stochastic series expansion (SSE). We demonstrate from our numerical calculations that the normal phase of HCBs in two dimensions can be an ideal conductor with dissipationless transport. In two dimensions, when the ground state is a SF, the superfluid stiffness drops to zero wi…
▽ More
We calculate the Drude weight in the superfluid (SF) and the supersolid (SS) phases of hard core boson (HCB) model using stochastic series expansion (SSE). We demonstrate from our numerical calculations that the normal phase of HCBs in two dimensions can be an ideal conductor with dissipationless transport. In two dimensions, when the ground state is a SF, the superfluid stiffness drops to zero with a Kosterlitz-Thouless type transition at $T_{KT}$. The Drude weight, though is equal to the stiffness below $T_{KT}$, surprisingly stays finite even for temperatures above $T_{KT}$ indicating the non-dissipative transport in the normal state of this system. In contrast to this in a three dimensional SF phase, where the superfluid stiffness goes to zero continuously with a second order phase transition at $T_c$, Drude weight also goes to zero at $T_c$ as expected. We also calculated the Drude weight in a 2D SS phase, where the charge density wave (CDW) order coexists with superfluidity. For the SS phase we studied, superfluidity is lost via Kosterlitz-Thouless transition at $T_{KT}$ and the transition temperature for the CDW order is larger than $T_{KT}$. In striped SS phase where the CDW order breaks the rotational symmetry of the lattice, for $T > T_{KT}$, the system behaves like an ideal conductor along one of the lattice direction while along the other direction it behaves like an insulator. In contrast to this, in star-SS phase, Drude weight along both the lattice directions goes to zero along with the superfluid stiffness and for $T > T_{KT}$ we have a finite temperature phase of a CDW insulator.
△ Less
Submitted 25 May, 2016; v1 submitted 11 February, 2016;
originally announced February 2016.
-
Error Propagation of the Track Model and Track Fitting Strategy for the Iron CALorimeter Detector in India-based Neutrino Observatory
Authors:
Kolahal Bhattacharya,
Arnab K. Pal,
Gobinda Majumder,
Naba K. Mondal
Abstract:
A Kalman filter package has been developed for reconstructing muon ($μ^\pm$) tracks (coming from the neutrino interactions) in ICAL detector. Here, we describe the algorithm of muon track fitting, with emphasis on the error propagation of the elements of Kalman state vector along the muon trajectory through dense materials and inhomogeneous magnetic field. The higher order correction terms are inc…
▽ More
A Kalman filter package has been developed for reconstructing muon ($μ^\pm$) tracks (coming from the neutrino interactions) in ICAL detector. Here, we describe the algorithm of muon track fitting, with emphasis on the error propagation of the elements of Kalman state vector along the muon trajectory through dense materials and inhomogeneous magnetic field. The higher order correction terms are included for reconstructing muon tracks at large zenith angle $θ$ (measured from the perpendicular to the detector planes). The performances of this algorithm and its limitations are discussed.
△ Less
Submitted 9 October, 2015;
originally announced October 2015.
-
Physics Potential of the ICAL detector at the India-based Neutrino Observatory (INO)
Authors:
The ICAL Collaboration,
Shakeel Ahmed,
M. Sajjad Athar,
Rashid Hasan,
Mohammad Salim,
S. K. Singh,
S. S. R. Inbanathan,
Venktesh Singh,
V. S. Subrahmanyam,
Shiba Prasad Behera,
Vinay B. Chandratre,
Nitali Dash,
Vivek M. Datar,
V. K. S. Kashyap,
Ajit K. Mohanty,
Lalit M. Pant,
Animesh Chatterjee,
Sandhya Choubey,
Raj Gandhi,
Anushree Ghosh,
Deepak Tiwari,
Ali Ajmi,
S. Uma Sankar,
Prafulla Behera,
Aleena Chacko
, et al. (67 additional authors not shown)
Abstract:
The upcoming 50 kt magnetized iron calorimeter (ICAL) detector at the India-based Neutrino Observatory (INO) is designed to study the atmospheric neutrinos and antineutrinos separately over a wide range of energies and path lengths. The primary focus of this experiment is to explore the Earth matter effects by observing the energy and zenith angle dependence of the atmospheric neutrinos in the mul…
▽ More
The upcoming 50 kt magnetized iron calorimeter (ICAL) detector at the India-based Neutrino Observatory (INO) is designed to study the atmospheric neutrinos and antineutrinos separately over a wide range of energies and path lengths. The primary focus of this experiment is to explore the Earth matter effects by observing the energy and zenith angle dependence of the atmospheric neutrinos in the multi-GeV range. This study will be crucial to address some of the outstanding issues in neutrino oscillation physics, including the fundamental issue of neutrino mass hierarchy. In this document, we present the physics potential of the detector as obtained from realistic detector simulations. We describe the simulation framework, the neutrino interactions in the detector, and the expected response of the detector to particles traversing it. The ICAL detector can determine the energy and direction of the muons to a high precision, and in addition, its sensitivity to multi-GeV hadrons increases its physics reach substantially. Its charge identification capability, and hence its ability to distinguish neutrinos from antineutrinos, makes it an efficient detector for determining the neutrino mass hierarchy. In this report, we outline the analyses carried out for the determination of neutrino mass hierarchy and precision measurements of atmospheric neutrino mixing parameters at ICAL, and give the expected physics reach of the detector with 10 years of runtime. We also explore the potential of ICAL for probing new physics scenarios like CPT violation and the presence of magnetic monopoles.
△ Less
Submitted 9 May, 2017; v1 submitted 27 May, 2015;
originally announced May 2015.
-
Observation of the rare $B^0_s\toμ^+μ^-$ decay from the combined analysis of CMS and LHCb data
Authors:
The CMS,
LHCb Collaborations,
:,
V. Khachatryan,
A. M. Sirunyan,
A. Tumasyan,
W. Adam,
T. Bergauer,
M. Dragicevic,
J. Erö,
M. Friedl,
R. Frühwirth,
V. M. Ghete,
C. Hartl,
N. Hörmann,
J. Hrubec,
M. Jeitler,
W. Kiesenhofer,
V. Knünz,
M. Krammer,
I. Krätschmer,
D. Liko,
I. Mikulec,
D. Rabady,
B. Rahbaran
, et al. (2807 additional authors not shown)
Abstract:
A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six sta…
▽ More
A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six standard deviations, and the best measurement of its branching fraction so far. Furthermore, evidence for the $B^0\toμ^+μ^-$ decay is obtained with a statistical significance of three standard deviations. The branching fraction measurements are statistically compatible with SM predictions and impose stringent constraints on several theories beyond the SM.
△ Less
Submitted 17 August, 2015; v1 submitted 17 November, 2014;
originally announced November 2014.
-
A Study on the time resolution of Glass RPC
Authors:
N. Dash,
V. M. Datar,
G. Majumder
Abstract:
The 50~kton Iron Calorimeter (ICAL) detector at the underground India based Neutrino Observatory (INO) will make measurements on atmospheric neutrinos. Muons produced in charged current (CC) interactions of muon neutrinos with the iron are tracked spatially and temporally through the signals that they produce in the Resistive Plate Chambers~(RPCs) that are interleaved with iron layers. Since the R…
▽ More
The 50~kton Iron Calorimeter (ICAL) detector at the underground India based Neutrino Observatory (INO) will make measurements on atmospheric neutrinos. Muons produced in charged current (CC) interactions of muon neutrinos with the iron are tracked spatially and temporally through the signals that they produce in the Resistive Plate Chambers~(RPCs) that are interleaved with iron layers. Since the RPCs will be operated in the avalanche mode the signal rise-time is $\sim~1~\rm{nsec}$ resulting in a fast time response. While the muon track is derived from the X and Y hit information of the RPCs and the layer number (Z), the upward or downward direction is obtained by using the time information from the detector. Such a capability can be examined by analysing the timing information from $1~\rm{m}~\times~1~\rm{m}$ glass RPCs, with $3~\rm{cm}$ wide X- and Y- pick-up strips, in a $12$ layer RPC stack that measures cosmic muon events. The present study looks at the pixel-wise time response of these RPCs in order to improve the relative time distribution and hence the up-down discrimination capability. After including the effect of propagation delay in the cable and pick-up panel the time resolution improves, in some cases, to $\leq~1~\rm{nsec}$ whereas in some cases there is no significant change. These results will help in significantly improving on the extraction of the directionality of muons produced in CC interactions of $ν_μ$ and $\barν_μ$.
△ Less
Submitted 21 October, 2014;
originally announced October 2014.
-
Sensitivity for detection of decay of dark matter particle using ICAL at INO
Authors:
N. Dash,
V. M. Datar,
G. Majumder
Abstract:
We report on the simulation studies on the possibility of dark matter particle (DMP) decaying into leptonic modes. While not much is known about the properties of dark matter particles except through their gravitational effect, it has been recently conjectured that the so called "anomalous Kolar Events" observed some decades ago may be due to the decay of unstable dark matter particles (M.V.N. Mur…
▽ More
We report on the simulation studies on the possibility of dark matter particle (DMP) decaying into leptonic modes. While not much is known about the properties of dark matter particles except through their gravitational effect, it has been recently conjectured that the so called "anomalous Kolar Events" observed some decades ago may be due to the decay of unstable dark matter particles (M.V.N. Murthy and G.Rajasekaran, Pramana, {\bf 82}, 609 (2014)). The aim of this study is to see if this conjecture can be verified at the proposed Iron Calorimeter (ICAL) detector at INO. We study the possible decay to leptonic modes which may be seen in this detector with some modifications. For the purposes of simulation we assume that each channel saturates the decay width for the mass ranging from $1-50 \rm{GeV/c^2}$. The aim is not only to investigate the decay signatures, but also, more generally, to establish lower bounds on the life time of DMP even if no such decay takes place.
△ Less
Submitted 20 October, 2014;
originally announced October 2014.
-
The Physics of the B Factories
Authors:
A. J. Bevan,
B. Golob,
Th. Mannel,
S. Prell,
B. D. Yabsley,
K. Abe,
H. Aihara,
F. Anulli,
N. Arnaud,
T. Aushev,
M. Beneke,
J. Beringer,
F. Bianchi,
I. I. Bigi,
M. Bona,
N. Brambilla,
J. B rodzicka,
P. Chang,
M. J. Charles,
C. H. Cheng,
H. -Y. Cheng,
R. Chistov,
P. Colangelo,
J. P. Coleman,
A. Drutskoy
, et al. (2009 additional authors not shown)
Abstract:
This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C.
Please note that version 3 on the archive is the auxiliary…
▽ More
This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C.
Please note that version 3 on the archive is the auxiliary version of the Physics of the B Factories book. This uses the notation alpha, beta, gamma for the angles of the Unitarity Triangle. The nominal version uses the notation phi_1, phi_2 and phi_3. Please cite this work as Eur. Phys. J. C74 (2014) 3026.
△ Less
Submitted 31 October, 2015; v1 submitted 24 June, 2014;
originally announced June 2014.
-
Search for Magnetic Monopole using ICAL at INO
Authors:
N. Dash,
V. M. Datar,
G. Majumder
Abstract:
Sub-relativistic magnetic monopoles are predicted from the GUT era by theory. To date there have been no confirmed observations of such exotic particles. The Iron CALorimeter (ICAL) at India-based Neutrino Observatory (INO) aims to measure the neutrino oscillation parameters precisely. As it is a tracking detector there is also the possibility of detecting magnetic monopoles in the sub-relativisti…
▽ More
Sub-relativistic magnetic monopoles are predicted from the GUT era by theory. To date there have been no confirmed observations of such exotic particles. The Iron CALorimeter (ICAL) at India-based Neutrino Observatory (INO) aims to measure the neutrino oscillation parameters precisely. As it is a tracking detector there is also the possibility of detecting magnetic monopoles in the sub-relativistic region. Using ICAL the magnetic monopole event is characterised by the large time intervals of upto 30 microsec between the signals in successive layers of the active detectors. The aim of this study is to identify the sensitivity of ICAL for a particle carrying magnetic charge in the mass range from 10^{5} to 10^{17} GeV with beta ranging from 10^{-5} to 9 x 10^{-1} for ICAL at INO. A similar study has also been carried out for the ICAL prototype which will be placed overground. Due to the rock cover of approximately 1.3 km, ICAL at INO will not be able to place bounds on the flux of the lower mass magnetic monopoles. This mass region is however addressed by the prototype ICAL.
△ Less
Submitted 16 June, 2014;
originally announced June 2014.
-
Observation of a Near-threshold $D^0\bar{D}^0π^0$ Enhancement in $B \to D^0\bar{D}^0π^0 K$ Decay
Authors:
G. Gokhroo,
G. Majumder
Abstract:
We report the first observation of a near-threshold enhancement in the $D^0\bar{D}^0π^0$ system from $B \to D^0\bar{D}^0π^0 K$ decays using a 414 $\mathrm{fb}^{-1}$ data sample collected at the $Υ(4S)$ resonance. The enhancement peaks at a mass $M=3875.4 \pm 0.7_{-2.0}^{+1.2}$ MeV/$c^2$ and the branching fraction for events in the peak is \Br ($B \to D^0\bar{D}^0π^0 K$)=(1.27 $\pm$ 0.31…
▽ More
We report the first observation of a near-threshold enhancement in the $D^0\bar{D}^0π^0$ system from $B \to D^0\bar{D}^0π^0 K$ decays using a 414 $\mathrm{fb}^{-1}$ data sample collected at the $Υ(4S)$ resonance. The enhancement peaks at a mass $M=3875.4 \pm 0.7_{-2.0}^{+1.2}$ MeV/$c^2$ and the branching fraction for events in the peak is \Br ($B \to D^0\bar{D}^0π^0 K$)=(1.27 $\pm$ 0.31 $_{-0.39}^{+0.22})$ $\times$ $10^{-4}$. The data were collected with the Belle detector at the KEKB energy-asymmetric $e^+e^-$ collider.
△ Less
Submitted 25 June, 2006;
originally announced June 2006.
-
The Cleo Rich Detector
Authors:
M. Artuso,
R. Ayad,
K. Bukin,
A. Efimov,
C. Boulahouache,
E. Dambasuren,
S. Kopp,
Ji Li,
G. Majumder,
N. Menaa,
R. Mountain,
S. Schuh,
T. Skwarnicki,
S. Stone,
G. Viehhauser,
J. C. Wang,
T. E. Coan,
V. Fadeyev,
Y. Maravin,
I. Volobouev,
J. Ye,
S. Anderson,
Y. Kubota,
A. Smith
Abstract:
We describe the design, construction and performance of a Ring Imaging Cherenkov Detector (RICH) constructed to identify charged particles in the CLEO experiment. Cherenkov radiation occurs in LiF crystals, both planar and ones with a novel ``sawtooth''-shaped exit surface. Photons in the wavelength interval 135--165 nm are detected using multi-wire chambers filled with a mixture of methane gas…
▽ More
We describe the design, construction and performance of a Ring Imaging Cherenkov Detector (RICH) constructed to identify charged particles in the CLEO experiment. Cherenkov radiation occurs in LiF crystals, both planar and ones with a novel ``sawtooth''-shaped exit surface. Photons in the wavelength interval 135--165 nm are detected using multi-wire chambers filled with a mixture of methane gas and triethylamine vapor. Excellent pion/kaon separation is demonstrated.
△ Less
Submitted 26 July, 2005; v1 submitted 15 June, 2005;
originally announced June 2005.
-
Observation of $B^0 \to D^+ D^-$, $B^- \to D^0 D^-$ and $B^- \to D^0 D^{*-}$ decays
Authors:
G. Majumder
Abstract:
We report the first observation of the decay modes $B^0 \to D^+ D^-$, $B^- \to D^0 D^-$ and $B^- \to D^0 D^{*-}$ based on 152 $\times$ 10$^6$ $B\bar{B}$ events collected at KEKB. The branching fractions of $B^0 \to D^+ D^-$, $B^- \to D^0 D^-$ and $B^- \to D^0 D^{*-}$ are found to be $(3.21 \pm 0.57 \pm 0.48) \times 10^{-4}$, $(5.62 \pm 0.82 \pm 0.65) \times 10^{-4}$ and…
▽ More
We report the first observation of the decay modes $B^0 \to D^+ D^-$, $B^- \to D^0 D^-$ and $B^- \to D^0 D^{*-}$ based on 152 $\times$ 10$^6$ $B\bar{B}$ events collected at KEKB. The branching fractions of $B^0 \to D^+ D^-$, $B^- \to D^0 D^-$ and $B^- \to D^0 D^{*-}$ are found to be $(3.21 \pm 0.57 \pm 0.48) \times 10^{-4}$, $(5.62 \pm 0.82 \pm 0.65) \times 10^{-4}$ and $(4.59 \pm 0.72 \pm 0.56) \times 10^{-4}$, respectively. Charge asymmetries in the $B^- \to D^0 D^-$ and $B^- \to D^0 D^{*-}$ channels are consistent with zero.
△ Less
Submitted 20 February, 2005;
originally announced February 2005.
-
Observation of $B^0 \to D^{*-} (5π)^+$, $B^+ \to D^{*-} (4π)^{++}$ and $B^+ \to \bar{D}^{*0} (5π)^+$
Authors:
G. Majumder
Abstract:
We report the first observation of a number of decay modes of the B meson, namely $B^0 \to D^{*-} (5π)^+$, $B^+ \to D^{*-} (4π)^{++}$ and $B^+ \to \bar{D}^{*0} (5π)^+$, where $(nπ)$ implies the combination of n charged pions. The analysis is based on a 140 fb$^{-1}$ data sample collected at the $Υ(4S)$ resonance with the Belle detector at KEKB. We measure…
▽ More
We report the first observation of a number of decay modes of the B meson, namely $B^0 \to D^{*-} (5π)^+$, $B^+ \to D^{*-} (4π)^{++}$ and $B^+ \to \bar{D}^{*0} (5π)^+$, where $(nπ)$ implies the combination of n charged pions. The analysis is based on a 140 fb$^{-1}$ data sample collected at the $Υ(4S)$ resonance with the Belle detector at KEKB. We measure ${\cal{B}}(B^0 \to D^{*-} (5π)^+) = (4.72 \pm 0.59 \pm 0.71) \times 10^{-3}$, ${\cal{B}}(B^+ \to D^{*-} (4π)^{++} = (2.56 \pm 0.26 \pm 0.33) \times 10^{-3}$ and ${\cal{B}}(B^+ \to \bar{D}^{*0} (5π)^+) = (5.67 \pm 0.91 \pm 0.85) \times 10^{-3}$. We also provide improved measurements of the branching fractions for the decay modes $B^0 \to D^{*-} (3π)^+$, $B^+ \to \bar{D}^{*0} (3π)^+$ and $B^0 \to \bar{D}^{*0} (4π)^0$.
△ Less
Submitted 2 September, 2004; v1 submitted 1 September, 2004;
originally announced September 2004.
-
Construction, Pattern Recognition and Performance of the CLEO III LiF-TEA RICH Detector
Authors:
M. Artuso,
R. Ayad,
K. Bukin,
A. Efimov,
C. Boulahouache,
E. Dambasuren,
S. Kopp,
R. Mountain,
G. Majumder,
S. Schuh,
T. Skwarnicki,
S. Stone,
G. Viehhauser,
J. C. Wang,
T. E. Coan,
V. Fadeyev,
Y. Maravin,
I. Volobouev,
J. Ye,
S. Anderson,
Y. Kubota,
A. Smith
Abstract:
We briefly describe the design, construction and performance of the LiF-Tea RICH detector built to identify charged particles in the CLEO III experiment. Excellent pion/kaon separation is demonstrated.
We briefly describe the design, construction and performance of the LiF-Tea RICH detector built to identify charged particles in the CLEO III experiment. Excellent pion/kaon separation is demonstrated.
△ Less
Submitted 13 September, 2002; v1 submitted 6 September, 2002;
originally announced September 2002.
-
B Physics at the Tevatron: Run II and Beyond
Authors:
K. Anikeev,
D. Atwood,
F. Azfar,
S. Bailey,
C. W. Bauer,
W. Bell,
G. Bodwin,
E. Braaten,
G. Burdman,
J. N. Butler,
K. Byrum,
N. Cason,
A. Cerri,
H. W. K. Cheung,
A. Dighe,
S. Donati,
R. K. Ellis,
A. Falk,
G. Feild,
S. Fleming,
I. Furic,
S. Gardner,
Y. Grossman,
G. Gutierrez,
W. Hao
, et al. (66 additional authors not shown)
Abstract:
This report provides a comprehensive overview of the prospects for B physics at the Tevatron. The work was carried out during a series of workshops starting in September 1999. There were four working groups: 1) CP Violation, 2) Rare and Semileptonic Decays, 3) Mixing and Lifetimes, 4) Production, Fragmentation and Spectroscopy. The report also includes introductory chapters on theoretical and ex…
▽ More
This report provides a comprehensive overview of the prospects for B physics at the Tevatron. The work was carried out during a series of workshops starting in September 1999. There were four working groups: 1) CP Violation, 2) Rare and Semileptonic Decays, 3) Mixing and Lifetimes, 4) Production, Fragmentation and Spectroscopy. The report also includes introductory chapters on theoretical and experimental tools emphasizing aspects of B physics specific to hadron colliders, as well as overviews of the CDF, D0, and BTeV detectors, and a Summary.
△ Less
Submitted 6 February, 2002; v1 submitted 9 January, 2002;
originally announced January 2002.
-
The Cleo III Rich Detector
Authors:
Gobinda Majumder
Abstract:
CLEO III upgrade was completed with the integration of Ring Imaging CHerenkov(RICH) detector for charged particle identification. The design of this cylindrical detector consists of LiF crystal radiators and multi-wire proportional chamber photon detectors coupled through a N2 filled expansion gap. Early performance on K/pion separation is presented.
CLEO III upgrade was completed with the integration of Ring Imaging CHerenkov(RICH) detector for charged particle identification. The design of this cylindrical detector consists of LiF crystal radiators and multi-wire proportional chamber photon detectors coupled through a N2 filled expansion gap. Early performance on K/pion separation is presented.
△ Less
Submitted 1 November, 2000;
originally announced November 2000.
-
The Cleo III Ring Imaging Cherenkov Detector
Authors:
M. Artuso,
R. Ayad,
A. Efimov,
S. Kopp,
G. Majumder,
R. Mountain,
S. Schuh,
T. Skwarnicki,
S. Stone,
G. Viehhauser,
J. Wang,
S. Anderson,
Y. Kubota,
A. Smith,
T. Coan,
V. Fadeyev,
J. Ye
Abstract:
The CLEO detector has been upgraded to include a state of the art particle identification system, based on the Ring Imaging Cherenkov Detector (RICH) technology, in order to take data at the upgraded CESR electron positron collider. The expected performance is reviewed, as well as the preliminary results from an engineering run during the first few months of operation of the CLEO III detector.
The CLEO detector has been upgraded to include a state of the art particle identification system, based on the Ring Imaging Cherenkov Detector (RICH) technology, in order to take data at the upgraded CESR electron positron collider. The expected performance is reviewed, as well as the preliminary results from an engineering run during the first few months of operation of the CLEO III detector.
△ Less
Submitted 4 August, 2000;
originally announced August 2000.
-
Performance of the CLEO III LiF-TEA Ring Imaging Cherenkov Detector in a High Energy Muon Beam
Authors:
M. Artuso,
R. Ayad,
F. Azfar,
A. Efimov,
S. Kopp,
R. Mountain,
G. Majumder,
S. Schuh,
T. Skwarnicki,
S. Stone,
G. Viehhauser,
J. C. Wang,
T. Coan,
V. Fadeyev,
I. Volobouev,
J. Ye,
S. Anderson,
Y. Kubota,
A. Smith,
E. Lipeles
Abstract:
The CLEO III Ring Imaging Cherenkov detector uses LiF radiators to generate Cherenkov photons which are then detected by proportional wire chambers using a mixture of CH$_4$ and TEA gases. The first two photon detector modules which were constructed, were taken to Fermilab and tested in a beam dump that provided high momentum muons. We report on results using both plane and "sawtooth" shaped rad…
▽ More
The CLEO III Ring Imaging Cherenkov detector uses LiF radiators to generate Cherenkov photons which are then detected by proportional wire chambers using a mixture of CH$_4$ and TEA gases. The first two photon detector modules which were constructed, were taken to Fermilab and tested in a beam dump that provided high momentum muons. We report on results using both plane and "sawtooth" shaped radiators. Specifically, we discuss the number of photoelectrons observed per ring and the angular resolution. The particle separation ability is shown to be sufficient for the physics of CLEO III.
△ Less
Submitted 25 October, 1999;
originally announced October 1999.
-
The CLEO-III RICH Detector and Beam Test Results
Authors:
J. C. Wang,
M. Artuso,
R. Ayad,
F. Azfar,
E. Dambasuren,
A. Efimov,
S. Kopp,
G. Majumder,
R. Mountain,
S. Schuh,
T. Skwarnicki,
S. Stone,
G. Viehhauser,
S. Anderson,
A. Smith,
Y. Kubota,
E. Lipeles,
T. Coan,
J. Staeck,
V. Fadeyev,
I. Volobouev,
J. Ye
Abstract:
We are constructing a Ring Imaging Cherenkov detector (RICH) for the CLEO III upgrade for precision charged hadron identification. The RICH uses plane and sawtooth LiF crystals as radiators, MWPCs as photon detectors with TEA as the photo-sensitive material, and low-noise Viking readout electronics. Results of a beam test of the first two out of total 30 sectors are presented.
We are constructing a Ring Imaging Cherenkov detector (RICH) for the CLEO III upgrade for precision charged hadron identification. The RICH uses plane and sawtooth LiF crystals as radiators, MWPCs as photon detectors with TEA as the photo-sensitive material, and low-noise Viking readout electronics. Results of a beam test of the first two out of total 30 sectors are presented.
△ Less
Submitted 29 March, 1999;
originally announced March 1999.
-
The CLEO-III Ring Imaging Cherenkov Detector
Authors:
R. J. Mountain,
M. Artuso,
R. Ayad,
F. Azfar,
A. Efimov,
S. Kopp,
G. Majumder,
S. Schuh,
T. Skwarnicki,
S. Stone,
G. Viehhauser,
S. Anderson,
A. Smith,
Y. Kubota,
E. Lipeles,
T. Coan,
J. Staeck,
V. Fadeyev,
I. Volobouev,
J. Ye
Abstract:
The CLEO-III Detector upgrade for charged particle identification is discussed. The RICH design uses solid LiF crystal radiators coupled with multi-wire chamber photon detectors, using TEA as the photosensor, and low-noise Viking readout electronics. Results from our beam test at Fermilab are presented.
The CLEO-III Detector upgrade for charged particle identification is discussed. The RICH design uses solid LiF crystal radiators coupled with multi-wire chamber photon detectors, using TEA as the photosensor, and low-noise Viking readout electronics. Results from our beam test at Fermilab are presented.
△ Less
Submitted 15 February, 1999;
originally announced February 1999.