-
Experimental demonstration of ultrathin broken-symmetry metasurfaces with controllably sharp resonant response
Authors:
Odysseas Tsilipakos,
Luca Maiolo,
Francesco Maita,
Romeo Beccherelli,
Maria Kafesaki,
Emmanouil E. Kriezis,
Traianos V. Yioultsis,
Dimitrios C. Zografopoulos
Abstract:
Symmetry-protected resonances can be made to couple with free space by introducing a small degree of geometric asymmetry, leading to controllably-sharp spectral response. Here, we experimentally demonstrate a broken-symmetry metasurface for the technologically important low millimeter wave spectrum. The proposed metasurface is fabricated on an ultrathin polyimide substrate, resulting in a low loss…
▽ More
Symmetry-protected resonances can be made to couple with free space by introducing a small degree of geometric asymmetry, leading to controllably-sharp spectral response. Here, we experimentally demonstrate a broken-symmetry metasurface for the technologically important low millimeter wave spectrum. The proposed metasurface is fabricated on an ultrathin polyimide substrate, resulting in a low loss and flexible structure. Measurements inside an anechoic chamber experimentally verify the theoretically predicted sharp spectral features corresponding to quality factors of several hundreds. The demonstrated sharp response is also observed with the complementary structure which responds to the orthogonal linear polarization (Babinet's principle). The designed metasurfaces can be exploited in diverse applications favoured by a controllably-sharp spectral response, e.g., filtering, sensing, switching, nonlinear applications, in either reflection or transmission mode operation. More generally, the demonstrated fabrication process provides a generic platform for low-cost, large-scale engineering of metasurfaces with minimal substrate-induced effects.
△ Less
Submitted 2 December, 2021;
originally announced December 2021.
-
Calibration of the IXPE instrument
Authors:
Fabio Muleri,
Carlo Lefevre,
Raffaele Piazzolla,
Alfredo Morbidini,
Fabrizio Amici,
Primo Attinà ,
Mauro Centrone,
Ettore Del Monte,
Sergio Di Cosimo,
Giuseppe Di Persio,
Yuri Evangelista,
Sergio Fabiani,
Riccardo Ferrazzoli,
Pasqualino Loffredo,
Luca Maiolo,
Francesco Maita,
Leandra Primicino,
John Rankin,
Alda Rubini,
Francesco Santoli,
Paolo Soffitta,
Antonino Tobia,
Alessia Tortosa,
Alessio Trois
Abstract:
IXPE scientific payload comprises of three telescopes, each composed of a mirror and a photoelectric polarimeter based on the Gas Pixel Detector design. The three focal plane detectors, together with the unit which interfaces them to the spacecraft, are named IXPE Instrument and they will be built and calibrated in Italy; in this proceeding, we will present how IXPE Instrument will be calibrated,…
▽ More
IXPE scientific payload comprises of three telescopes, each composed of a mirror and a photoelectric polarimeter based on the Gas Pixel Detector design. The three focal plane detectors, together with the unit which interfaces them to the spacecraft, are named IXPE Instrument and they will be built and calibrated in Italy; in this proceeding, we will present how IXPE Instrument will be calibrated, both on-ground and in-flight. The Instrument Calibration Equipment is being finalized at INAF-IAPS in Rome (Italy) to produce both polarized and unpolarized radiation, with a precise knowledge of direction, position, energy and polarization state of the incident beam. In flight, a set of four calibration sources based on radioactive material and mounted on a filter and calibration wheel will allow for the periodic calibration of all of the three IXPE focal plane detectors independently. A highly polarized source and an unpolarized one will be used to monitor the response to polarization; the remaining two will be used to calibrate the gain through the entire lifetime of the mission.
△ Less
Submitted 29 November, 2021;
originally announced November 2021.
-
In-flight calibration system of Imaging X-ray Polarimetry Explorer
Authors:
Riccardo Ferrazzoli,
Fabio Muleri,
Carlo Lefevre,
Alfredo Morbidini,
Fabrizio Amici,
Daniele Brienza,
Enrico Costa,
Ettore Del Monte,
Alessandro Di Marco,
Giuseppe Di Persio,
Immacolata Donnarumma,
Sergio Fabiani,
Fabio La Monaca,
Pasqualino Loffredo,
Luca Maiolo,
Francesco Maita,
Raffaele Piazzolla,
Brian Ramsey,
John Rankin,
Ajay Ratheesh,
Alda Rubini,
Paolo Sarra,
Paolo Soffitta,
Antonino Tobia,
Fei Xie
Abstract:
The NASA/ASI Imaging X-ray Polarimetry Explorer, which will be launched in 2021, will be the first instrument to perform spatially resolved X-ray polarimetry on several astronomical sources in the 2-8 keV energy band. These measurements are made possible owing to the use of a gas pixel detector (GPD) at the focus of three X-ray telescopes. The GPD allows simultaneous measurements of the interactio…
▽ More
The NASA/ASI Imaging X-ray Polarimetry Explorer, which will be launched in 2021, will be the first instrument to perform spatially resolved X-ray polarimetry on several astronomical sources in the 2-8 keV energy band. These measurements are made possible owing to the use of a gas pixel detector (GPD) at the focus of three X-ray telescopes. The GPD allows simultaneous measurements of the interaction point, energy, arrival time, and polarization angle of detected X-ray photons. The increase in sensitivity, achieved 40 years ago, for imaging and spectroscopy with the Einstein satellite will thus be extended to X-ray polarimetry for the first time. The characteristics of gas multiplication detectors are subject to changes over time. Because the GPD is a novel instrument, it is particularly important to verify its performance and stability during its mission lifetime. For this purpose, the spacecraft hosts a filter and calibration set (FCS), which includes both polarized and unpolarized calibration sources for performing in-flight calibration of the instruments. In this study, we present the design of the flight models of the FCS and the first measurements obtained using silicon drift detectors and CCD cameras, as well as those obtained in thermal vacuum with the flight units of the GPD. We show that the calibration sources successfully assess and verify the functionality of the GPD and validate its scientific results in orbit; this improves our knowledge of the behavior of these detectors in X-ray polarimetry.
△ Less
Submitted 27 October, 2020;
originally announced October 2020.
