Showing 1–13 of 13 results for author: Magnusson, R

Infrared resonance-lattice device technology

Authors: Robert Magnusson, Yeong H. Ko, Kyu J. Lee, Fairooz A. Simlan, Pawarat Bootpakdeetam, Renjie Chen, Debra Wawro Weidanz, Susanne Gimlin, Soroush Ghaffari

Abstract: We present subwavelength resonant lattices fashioned as nano- and microstructured films as a basis for a host of device concepts. Whereas the canonical physical properties are fully embodied in a one-dimensional periodic lattice, the final device constructs are often patterned in two-dimensionally-modulated films in which case we may refer to them as photonic crystal slabs, metamaterials, or metas… ▽ More We present subwavelength resonant lattices fashioned as nano- and microstructured films as a basis for a host of device concepts. Whereas the canonical physical properties are fully embodied in a one-dimensional periodic lattice, the final device constructs are often patterned in two-dimensionally-modulated films in which case we may refer to them as photonic crystal slabs, metamaterials, or metasurfaces. These surfaces can support lateral modes and localized field signatures with propagative and evanescent diffraction channels critically controlling the response. The governing principle of guided-mode, or lattice, resonance enables diverse spectral expressions such that a single-layer component can behave as a sensor, reflector, filter, or polarizer. This structural sparsity contrasts strongly with the venerable field of multi-layer thin-film optics that is basis for most optical components on the market today. The lattice resonance effect can be exploited in all major spectral regions with appropriate low-loss materials and fabrication resources. In this paper, we highlight resonant device technology and present our work on design, fabrication, and characterization of optical elements operating in the near-IR, mid-IR, and long-wave IR spectral regions. Examples of fabricated and tested devices include biological sensors, high-contrast-ratio polarizers, narrow-band notch filters, and wideband high reflectors. △ Less

Submitted 19 April, 2024; originally announced April 2024.

Comments: 11 pages, 10 figures

Spectral Tuning of Polarization Selective Reflections Bands in GLAD deposited HfAlN chiral sculptured thin films

Authors: Samiran Bairagi, Marcus Lorentzon, Firat Angay, Roger Magnusson, Jens Birch, Ching-Lien Hsiao, Naureen Ghafoor, Kenneth Järrendahl

Abstract: We present the first report on fabrication of Hafnium aluminum nitride chiral sculptured thin films (CSTFs) using reactive magnetron sputtering in a glancing angle deposition configuration, and the analysis of its optical polarization properties. The resulting CSTFs were designed to give interference extrema or so-called circular Bragg (CB) resonances at desired wavelengths in the region from 370… ▽ More We present the first report on fabrication of Hafnium aluminum nitride chiral sculptured thin films (CSTFs) using reactive magnetron sputtering in a glancing angle deposition configuration, and the analysis of its optical polarization properties. The resulting CSTFs were designed to give interference extrema or so-called circular Bragg (CB) resonances at desired wavelengths in the region from 370 to 690 nm. This was achieved by tailoring the growth of the chiral thin films to obtain a dielectric pitch between 87 and 260.9 nm. The spectral positions of the obtained CB resonances were compared to values from analytical expressions. Contrary to the common case where the dielectric pitch is half of the growth-related rotational pitch due to a 180° symmetry, this pitch was shown to be the same as the rotational pitch. It is concluded that this is due to the c-axis of the CSTF being tilted about 45° from the substrate normal. The morphology and crystallographic characterizations were done using scanning electron microscopy and X-ray diffraction, respectively, while the tilt of the crystal lattice was corroborated using X-ray diffraction pole figures. The optical response from the CSTFs was analyzed using Mueller matrix spectroscopic ellipsometry from which the degree of circular polarization at the CB resonances was obtained. In addition, a strong non-reciprocal reflection was observed which could be attributed to the helicoidal morphology and the intrinsic crystal tilt. An optical layered model of the chiral structure including azimuthal twist and using the Cauchy dispersion relations was used to simulate the Mueller matrix elements and compare with the ellipsometry measurements. The correlation between the simulated and experimental data gave information of the morphological parameters of the CSTF and its optical properties. △ Less

Submitted 6 April, 2024; originally announced April 2024.

Dual angular tunability of 2D infrared notch filters: Analysis, experiments, physics

Authors: Y. H. Ko, K. J. Lee, F. A. Simlan, N. Gupta, R. Magnusson

Abstract: Two-dimensional (2D) resonant gratings enable dual angular tunability by controlling the plane of incidence (POI) under linear polarization. If the POI is set to be perpendicular to the electric field vector (s-polarization or transverse electric (TE) polarization), an excited TE mode provides spectral tuning. The orthogonally propagating TM mode is robust in angle. Conversely, if the POI is set f… ▽ More Two-dimensional (2D) resonant gratings enable dual angular tunability by controlling the plane of incidence (POI) under linear polarization. If the POI is set to be perpendicular to the electric field vector (s-polarization or transverse electric (TE) polarization), an excited TE mode provides spectral tuning. The orthogonally propagating TM mode is robust in angle. Conversely, if the POI is set for p-polarization, an ex-cited TM mode provides the tuning. Detailed explanations of the underlying physical processes are set forth by decomposing the 2D lattice into equivalent 1D gratings using second-order effective-medium theory (EMT). This is shown to work extremely well even for a strongly modulated lattice with refractive-index contrast of 3. With proper design and corresponding experiments, a widely tunable notch filter covering longwave infrared bands is demonstrated. Experimentally varying the incidence angle up to 16 degree, a notch channel in TM polarization tunes across a band exceeding 0.5 um with the TE channel remaining at a constant wavelength. The interesting appearance of a resonance channel originating in diagonally propagating leaky modes is briefly examined. The analysis and experiments presented will be useful for realizing diverse 2D tunable filters while furnishing methodology for detailed understanding of the attendant near fields and mode structure. △ Less

Submitted 4 October, 2022; originally announced October 2022.

Singular states of resonant nanophotonic lattices

Authors: Y. H. Ko, K. J. Lee, F. A. Simlan, R. Magnusson

Abstract: Fundamental effects in nanophotonic resonance systems focused on singular states and their properties are presented. Strongly related to lattice geometry and material composition, there appear resonant bright channels and non-resonant dark channels in the spectra. The bright state corresponds to high reflectivity guided-mode resonance (GMR) whereas the dark channel represents a bound state in the… ▽ More Fundamental effects in nanophotonic resonance systems focused on singular states and their properties are presented. Strongly related to lattice geometry and material composition, there appear resonant bright channels and non-resonant dark channels in the spectra. The bright state corresponds to high reflectivity guided-mode resonance (GMR) whereas the dark channel represents a bound state in the continuum (BIC). Even in simple systems, singular states with tunable bandwidth appear as isolated spectral lines that are widely separated from other resonance features. Under moderate lattice modulation, there ensues leaky-band metamorphosis, merging modal bands and resulting in offset dark states and reflective BICs along with transmissive BICs within a high-reflectance wideband. Rytov-type effective medium theory (EMT) is shown to be a powerful means to describe, formulate, and understand the collective GMR/BIC fundamentals in resonant photonic systems. Particularly, the discarded Rytov analytical solution for asymmetric fields is shown here to predict the dark BIC states essentially exactly for considerable modulation levels. The propagation constant of an equivalent EMT homogeneous film provides a quantitative evaluation of the eminent, oft-cited embedded BIC eigenvalue. The work concludes with experimental verification of key effects. △ Less

Submitted 1 October, 2022; originally announced October 2022.

Comments: 8 pages, 6 figures

Perfectly-reflecting guided-mode-resonant photonic lattices possessing Mie modal memory

Authors: Yeong Hwan Ko, Nasrin Razmjooei, Hafez Hemmati, Robert Magnusson

Abstract: Resonant periodic nanostructures provide perfect reflection across small or large spectral bandwidths depending on the choice of materials and design parameters. This effect has been known for decades, observed theoretically and experimentally via one-dimensional and two-dimensional structures commonly known as resonant gratings, metamaterials, and metasurfaces. The physical cause of this extraord… ▽ More Resonant periodic nanostructures provide perfect reflection across small or large spectral bandwidths depending on the choice of materials and design parameters. This effect has been known for decades, observed theoretically and experimentally via one-dimensional and two-dimensional structures commonly known as resonant gratings, metamaterials, and metasurfaces. The physical cause of this extraordinary phenomenon is guided-mode resonance mediated by lateral Bloch modes excited by evanescent diffraction orders in the subwavelength regime. In recent years, hundreds of papers have declared Fabry-Perot or Mie resonance to be basis of the perfect reflection possessed by periodic metasurfaces. Treating a simple one-dimensional cylindrical-rod lattice, here we show clearly and unambiguously that Mie resonance does not cause perfect reflection. In fact, the spectral placement of the Bloch-mode-mediated zero-order reflectance is primarily controlled by the lattice period by way of its direct effect on the homogenized effective-medium refractive index of the lattice. In general, perfect reflection appears away from Mie resonance. However, when the lateral leaky-mode field profiles approach the isolated-particle Mie field profiles, the resonance locus tends towards the Mie resonance wavelength. The fact that the lattice fields remember the isolated particle fields is referred here as Mie modal memory. On erasure of the Mie memory by an index-matched sublayer, we show that perfect reflection survives with the resonance locus approaching the homogenized effective-medium waveguide locus. The results presented here will aid in clarifying the physical basis of general resonant photonic lattices. △ Less

Submitted 16 December, 2020; originally announced December 2020.

Comments: 9 pages, 5 figures

Applicability of the Rytov full effective-medium formalism to the physical description and design of resonant metasurfaces

Authors: Hafez Hemmati, Robert Magnusson

Abstract: Periodic photonic lattices constitute a fundamental pillar of physics supporting a plethora of scientific concepts and applications. The advent of metamaterials and metastructures is grounded in deep understanding of their properties. Based on the original 1956 formulation by Rytov, it is well known that a photonic lattice with deep subwavelength periodicity can be approximated with a homogeneous… ▽ More Periodic photonic lattices constitute a fundamental pillar of physics supporting a plethora of scientific concepts and applications. The advent of metamaterials and metastructures is grounded in deep understanding of their properties. Based on the original 1956 formulation by Rytov, it is well known that a photonic lattice with deep subwavelength periodicity can be approximated with a homogeneous space having an effective refractive index. Whereas the attendant effective-medium theory (EMT) commonly used in the literature is based on the zeroth root, the closed-form transcendental equations possess an infinite number of roots. Thus far, these higher-order solutions have been totally ignored; even Rytov himself discarded them and proceeded to approximate solutions for the deep-subwavelength regime. In spite of the fact that the Rytov EMT models an infinite half-space lattice, it is highly relevant to modeling practical thin-film periodic structures with finite thickness as we show. Therefore, here, we establish a theoretical framework to systematically describe subwavelength resonance behavior and to predict the optical response of resonant photonic lattices using the full Rytov solutions. Expeditious results are obtained with direct, new physical insights available for resonant lattice properties. We show that the full Rytov formulation implicitly contains refractive-index solutions pertaining directly to evanescent waves that drive the laterally-propagating Bloch modes foundational to resonant lattice properties. In fact, the resonant reradiated Bloch modes experience wavelength-dependent refractive indices that are solutions of the Rytov expressions. This insight is useful in modeling guided-mode resonant devices including wideband reflectors, bandpass filters, and polarizers. △ Less

Submitted 8 June, 2020; originally announced June 2020.

Comments: 14 pages, 7 figures

Optical and mechanical properties of amorphous Mg-Si-O-N thin films deposited by reactive magnetron sputtering

Authors: Sharafat Ali, Biplab Paul, Roger Magnusson, Erik Ekstrom, Camille Pallier, Bo Jonson, Per Eklund, Jens Birch

Abstract: In this work, amorphous thin films in Mg-Si-O-N system were prepared in order to investigate the dependence of optical and mechanical properties on Mg composition. Reactive RF magnetron co-sputtering from magnesium and silicon targets were used for the deposition of Mg-Si-O-N thin films. Films were deposited on float glass, silica wafers and sapphire substrates in an Ar, N2 and O2 gas mixture. X-r… ▽ More In this work, amorphous thin films in Mg-Si-O-N system were prepared in order to investigate the dependence of optical and mechanical properties on Mg composition. Reactive RF magnetron co-sputtering from magnesium and silicon targets were used for the deposition of Mg-Si-O-N thin films. Films were deposited on float glass, silica wafers and sapphire substrates in an Ar, N2 and O2 gas mixture. X-ray photoelectron spectroscopy, atomic force microscopy, scanning electron microscopy, spectroscopic ellipsometry, and nanoindentation were employed to characterize the composition, surface morphology, and properties of the films. △ Less

Submitted 7 May, 2019; originally announced May 2019.

Band flips and bound-state transitions in leaky-mode photonic lattices

Authors: Sun-Goo Lee, Robert Magnusson

Abstract: Leaky-mode photonic lattices exhibit intricate resonance effects originating in quasi-guided lateral Bloch modes. Key spectral properties are associated with phase-matched modes at the second (leaky) stop band. One band edge mode suffers radiation loss generating leaky-mode resonance whereas the other band edge mode becomes a bound state in the continuum (BIC). Here, we present analytical and nume… ▽ More Leaky-mode photonic lattices exhibit intricate resonance effects originating in quasi-guided lateral Bloch modes. Key spectral properties are associated with phase-matched modes at the second (leaky) stop band. One band edge mode suffers radiation loss generating leaky-mode resonance whereas the other band edge mode becomes a bound state in the continuum (BIC). Here, we present analytical and numerical results on the formation and properties of the leaky stop band. We show that the frequency of the leaky-mode resonance band edge, and correspondingly the BIC edge, is determined by superposition of Bragg processes chiefly generated by the first two Fourier harmonics of the spatial modulation. We derive conditions for the band closure and band flip wherein the leaky edge and the bound-state edge transit across the band gap. Our work elucidates fundamental aspects of periodic photonic films and has high relevance to the burgeoning field of metamaterials. △ Less

Submitted 7 April, 2018; originally announced April 2018.

Comments: 11 pages, 5 figures

Journal ref: Phys. Rev. B 99, 045304 (2019)

Properties of wideband resonant reflectors under fully conical light incidence

Authors: Yeong Hwan Ko, Manoj Niraula, Kyu ** Lee, Robert Magnusson

Abstract: Applying numerical modeling coupled with experiments, we investigate the properties of wideband resonant reflectors under fully conical light incidence. We show that the wave vectors pertinent to resonant first-order diffraction under fully conical mounting vary less with incident angle than those associated with reflectors in classical mounting. Therefore, as the evanescent diffracted waves drive… ▽ More Applying numerical modeling coupled with experiments, we investigate the properties of wideband resonant reflectors under fully conical light incidence. We show that the wave vectors pertinent to resonant first-order diffraction under fully conical mounting vary less with incident angle than those associated with reflectors in classical mounting. Therefore, as the evanescent diffracted waves drive the leaky modes responsible for the resonance effects, fully-conical mounting imbues reflectors with larger angular tolerance than their classical counterparts. We quantify the angular-spectral performance of representative resonant wideband reflectors in conic and classic mounts by numerical calculations with improved spectra found for fully conic incidence. Moreover, these predictions are verified experimentally for wideband reflectors fashioned in crystalline and amorphous silicon in distinct spectral regions spanning the 1200-1600-nm and 1600-2400-nm spectral bands. These results will be useful in various applications demanding wideband reflectors that are efficient and materially sparse. △ Less

Submitted 6 January, 2016; originally announced January 2016.

Comments: 10 pages, 8 figures

New principle for unpolarized wideband reflectors

Authors: Manoj Niraula, Robert Magnusson

Abstract: There is immense scientific interest in the properties of resonant thin films embroidered with periodic nanoscale features. This device class possesses considerable innovation potential. Accordingly, we report unpolarized broadband reflectors enabled by a serial arrangement of a pair of polarized subwavelength gratings. Optimized with numerical methods, our elemental gratings consist of a partiall… ▽ More There is immense scientific interest in the properties of resonant thin films embroidered with periodic nanoscale features. This device class possesses considerable innovation potential. Accordingly, we report unpolarized broadband reflectors enabled by a serial arrangement of a pair of polarized subwavelength gratings. Optimized with numerical methods, our elemental gratings consist of a partially-etched crystalline-silicon film on a quartz substrate. The resulting reflectors exhibit extremely wide spectral reflection bands in one polarization. By arranging two such reflectors sequentially with orthogonal periodicities, there results an unpolarized spectral band that exceeds those of the individual polarized bands. In the experiments reported herein, we achieve zero-order reflectance exceeding 97% under unpolarized light incidence over a 500-nm-wide wavelength band in the near-infrared domain. Moreover, the resonant unpolarized broadband accommodates an ultra-high-reflection band spanning ~85 nm and exceeding 99.9% in efficiency. The elemental polarization-sensitive reflectors based on one-dimensional resonant gratings have simple design, robust performance, and are straightforward to fabricate. Hence, this technology is a promising alternative to traditional multilayer thin-film reflectors especially at longer wavelengths of light where multilayer deposition may be infeasible or impractical. △ Less

Submitted 6 January, 2016; originally announced January 2016.

Comments: 8 pages, 7 figures

Single-periodic-film optical bandpass filter

Authors: Manoj Niraula, Jae Woong Yoon, Robert Magnusson

Abstract: Resonant periodic surfaces and films enable new functionalities with wide applicability in practical optical systems. Their material sparsity, ease of fabrication, and minimal interface count provide environmental and thermal stability and robustness in applications. Here we report an experimental bandpass filter fashioned in a single patterned layer on a substrate. Its performance corresponds to… ▽ More Resonant periodic surfaces and films enable new functionalities with wide applicability in practical optical systems. Their material sparsity, ease of fabrication, and minimal interface count provide environmental and thermal stability and robustness in applications. Here we report an experimental bandpass filter fashioned in a single patterned layer on a substrate. Its performance corresponds to bandpass filters requiring perhaps 30 traditional thin-film layers as shown by an example. We demonstrate an ultra-narrow, high-efficiency bandpass filter with extremely wide, flat, and low sidebands. This class of devices is designed with rigorous solutions of the Maxwell equations while engaging the physical principles of resonant waveguide gratings. The proposed technology is integration-friendly and opens doors for further development in various disciplines and spectral regions where thin-film solutions are traditionally applied. △ Less

Submitted 9 September, 2015; originally announced September 2015.

Comments: 5 pages, 3 figures

Wideband resonant polarizers made with ultra-sparse dielectric nanowire grids

Authors: Jae Woong Yoon, Kyu ** Lee, Robert Magnusson

Abstract: Polarizers are essential in diverse photonics applications including display [1], microscopy [2], polarimetric astrophysical observation [3], laser machining [4], and quantum information processing [5]. Whereas conventional polarizers based on natural crystals and multilayer thin films are commonplace, nanostructured polarizers offer compact integrability [6,7], thermal stability in high-power sys… ▽ More Polarizers are essential in diverse photonics applications including display [1], microscopy [2], polarimetric astrophysical observation [3], laser machining [4], and quantum information processing [5]. Whereas conventional polarizers based on natural crystals and multilayer thin films are commonplace, nanostructured polarizers offer compact integrability [6,7], thermal stability in high-power systems [4,8], and space-variant vector beam generation [9,10]. Here, we introduce a new class of reflectors and polarizers fashioned with dielectric nanowire grids that are mostly empty space. It is fundamentally extremely significant that the wideband spectral expressions presented can be generated in these minimal systems. We provide computed results predicting high reflection and attendant polarization extinction in multiple spectral regions. Experimental results with Si nanowire arrays show ~200-nm-wide band of total reflection for one polarization state and free transmission for the orthogonal state. These results agree quantitatively with theoretical predictions. △ Less

Submitted 8 July, 2015; originally announced July 2015.

Optical properties of carbon nanofiber photonic crystals

Authors: R. Rehammar, R. Magnusson, A. I. Fernandez-Dominguez, H. Arwin, J. M. Kinaret, S. A. Maier, E. E. B. Campbell

Abstract: Carbon nanofibers (CNF) are used as components of planar photonic crystals. Square and rectangular lattices and random patterns of vertically aligned CNF were fabricated and their properties studied using ellipsometry. We show that detailed information such as symmetry directions and the band structure of these novel materials can be extracted from considerations of the polarization state in the s… ▽ More Carbon nanofibers (CNF) are used as components of planar photonic crystals. Square and rectangular lattices and random patterns of vertically aligned CNF were fabricated and their properties studied using ellipsometry. We show that detailed information such as symmetry directions and the band structure of these novel materials can be extracted from considerations of the polarization state in the specular beam. The refractive index of the individual nanofibers was found to be n_CNF = 4.1. △ Less

Submitted 17 November, 2010; v1 submitted 7 January, 2010; originally announced January 2010.

Comments: 10 pages, 4 figures

Journal ref: Nanotechnology 21 (2010) 465203