-
Enhancing Dispersive Readout of Superconducting Qubits Through Dynamic Control of the Dispersive Shift: Experiment and Theory
Authors:
François Swiadek,
Ross Shillito,
Paul Magnard,
Ants Remm,
Christoph Hellings,
Nathan Lacroix,
Quentin Ficheux,
Dante Colao Zanuz,
Graham J. Norris,
Alexandre Blais,
Sebastian Krinner,
Andreas Wallraff
Abstract:
The performance of a wide range of quantum computing algorithms and protocols depends critically on the fidelity and speed of the employed qubit readout. Examples include gate sequences benefiting from mid-circuit, real-time, measurement-based feedback, such as qubit initialization, entanglement generation, teleportation, and perhaps most importantly, quantum error correction. A prominent and wide…
▽ More
The performance of a wide range of quantum computing algorithms and protocols depends critically on the fidelity and speed of the employed qubit readout. Examples include gate sequences benefiting from mid-circuit, real-time, measurement-based feedback, such as qubit initialization, entanglement generation, teleportation, and perhaps most importantly, quantum error correction. A prominent and widely-used readout approach is based on the dispersive interaction of a superconducting qubit strongly coupled to a large-bandwidth readout resonator, frequently combined with a dedicated or shared Purcell filter protecting qubits from decay. By dynamically reducing the qubit-resonator detuning and thus increasing the dispersive shift, we demonstrate a beyond-state-of-the-art two-state-readout error of only $0.25\,\%$ in 100 ns integration time. Maintaining low readout-drive strength, we nearly quadruple the signal-to-noise ratio of the readout by doubling the readout mode linewidth, which we quantify by considering the hybridization of the readout-resonator and its dedicated Purcell-filter. We find excellent agreement between our experimental data and our theoretical model. The presented results are expected to further boost the performance of new and existing algorithms and protocols critically depending on high-fidelity, fast, mid-circuit measurements.
△ Less
Submitted 15 July, 2023;
originally announced July 2023.
-
Realization of a Universal Quantum Gate Set for Itinerant Microwave Photons
Authors:
Kevin Reuer,
Jean-Claude Besse,
Lucien Wernli,
Paul Magnard,
Philipp Kurpiers,
Graham J. Norris,
Andreas Wallraff,
Christopher Eichler
Abstract:
Deterministic photon-photon gates enable the controlled generation of entanglement between mobile carriers of quantum information. Such gates have thus far been exclusively realized in the optical domain and by relying on post-selection. Here, we present a non-post-selected, deterministic, photon-photon gate in the microwave frequency range realized using superconducting circuits. We emit photonic…
▽ More
Deterministic photon-photon gates enable the controlled generation of entanglement between mobile carriers of quantum information. Such gates have thus far been exclusively realized in the optical domain and by relying on post-selection. Here, we present a non-post-selected, deterministic, photon-photon gate in the microwave frequency range realized using superconducting circuits. We emit photonic qubits from a source chip and route those qubits to a gate chip with which we realize a universal gate set by combining controlled absorption and re-emission with single-qubit gates and qubit-photon controlled-phase gates. We measure quantum process fidelities of $75\,\%$ for single- and of $57\,\%$ for two-qubit gates, limited mainly by radiation loss and decoherence. This universal gate set has a wide range of potential applications in superconducting quantum networks.
△ Less
Submitted 7 June, 2021;
originally announced June 2021.
-
Microwave Quantum Link between Superconducting Circuits Housed in Spatially Separated Cryogenic Systems
Authors:
Paul Magnard,
Simon Storz,
Philipp Kurpiers,
Josua Schär,
Fabian Marxer,
Janis Lütolf,
Jean-Claude Besse,
Mihai Gabureac,
Kevin Reuer,
Abdulkadir Akin,
Baptiste Royer,
Alexandre Blais,
Andreas Wallraff
Abstract:
Superconducting circuits are a strong contender for realizing quantum computing systems, and are also successfully used to study quantum optics and hybrid quantum systems. However, their cryogenic operation temperatures and the current lack of coherence-preserving microwave-to-optical conversion solutions have hindered the realization of superconducting quantum networks either spanning different c…
▽ More
Superconducting circuits are a strong contender for realizing quantum computing systems, and are also successfully used to study quantum optics and hybrid quantum systems. However, their cryogenic operation temperatures and the current lack of coherence-preserving microwave-to-optical conversion solutions have hindered the realization of superconducting quantum networks either spanning different cryogenics systems or larger distances. Here, we report the successful operation of a cryogenic waveguide coherently linking transmon qubits located in two dilution refrigerators separated by a physical distance of five meters. We transfer qubit states and generate entanglement on-demand with average transfer and target state fidelities of 85.8 % and 79.5 %, respectively, between the two nodes of this elementary network. Cryogenic microwave links do provide an opportunity to scale up systems for quantum computing and create local area quantum communication networks over length scales of at least tens of meters.
△ Less
Submitted 4 August, 2020;
originally announced August 2020.
-
Demonstration of an All-Microwave Controlled-Phase Gate between Far Detuned Qubits
Authors:
S. Krinner,
P. Kurpiers,
B. Royer,
P. Magnard,
I. Tsitsilin,
J. -C. Besse,
A. Remm,
A. Blais,
A. Wallraff
Abstract:
A challenge in building large-scale superconducting quantum processors is to find the right balance between coherence, qubit addressability, qubit-qubit coupling strength, circuit complexity and the number of required control lines. Leading all-microwave approaches for coupling two qubits require comparatively few control lines and benefit from high coherence but suffer from frequency crowding and…
▽ More
A challenge in building large-scale superconducting quantum processors is to find the right balance between coherence, qubit addressability, qubit-qubit coupling strength, circuit complexity and the number of required control lines. Leading all-microwave approaches for coupling two qubits require comparatively few control lines and benefit from high coherence but suffer from frequency crowding and limited addressability in multi-qubit settings. Here, we overcome these limitations by realizing an all-microwave controlled-phase gate between two transversely coupled transmon qubits which are far detuned compared to the qubit anharmonicity. The gate is activated by applying a single, strong microwave tone to one of the qubits, inducing a coupling between the two-qubit $|f,g\rangle$ and $|g,e\rangle$ states, with $|g\rangle$, $|e\rangle$, and $|f\rangle$ denoting the lowest energy states of a transmon qubit. Interleaved randomized benchmarking yields a gate fidelity of $97.5\pm 0.3 \%$ at a gate duration of $126\,\rm{ns}$, with the dominant error source being decoherence. We model the gate in presence of the strong drive field using Floquet theory and find good agreement with our data. Our gate constitutes a promising alternative to present two-qubit gates and could have hardware scaling advantages in large-scale quantum processors as it neither requires additional drive lines nor tunable couplers.
△ Less
Submitted 18 June, 2020;
originally announced June 2020.
-
Realizing a Deterministic Source of Multipartite-Entangled Photonic Qubits
Authors:
Jean-Claude Besse,
Kevin Reuer,
Michele C. Collodo,
Arne Wulff,
Lucien Wernli,
Adrian Copetudo,
Daniel Malz,
Paul Magnard,
Abdulkadir Akin,
Mihai Gabureac,
Graham J. Norris,
J. Ignacio Cirac,
Andreas Wallraff,
Christopher Eichler
Abstract:
Sources of entangled electromagnetic radiation are a cornerstone in quantum information processing and offer unique opportunities for the study of quantum many-body physics in a controlled experimental setting. While multi-mode entangled states of radiation have been generated in various platforms, all previous experiments are either probabilistic or restricted to generate specific types of states…
▽ More
Sources of entangled electromagnetic radiation are a cornerstone in quantum information processing and offer unique opportunities for the study of quantum many-body physics in a controlled experimental setting. While multi-mode entangled states of radiation have been generated in various platforms, all previous experiments are either probabilistic or restricted to generate specific types of states with a moderate entanglement length. Here, we demonstrate the fully deterministic generation of purely photonic entangled states such as the cluster, GHZ, and W state by sequentially emitting microwave photons from a controlled auxiliary system into a waveguide. We tomographically reconstruct the entire quantum many-body state for up to $N=4$ photonic modes and infer the quantum state for even larger $N$ from process tomography. We estimate that localizable entanglement persists over a distance of approximately ten photonic qubits, outperforming any previous deterministic scheme.
△ Less
Submitted 14 May, 2020;
originally announced May 2020.
-
Quantum communication with time-bin encoded microwave photons
Authors:
Philipp Kurpiers,
Marek Pechal,
Baptiste Royer,
Paul Magnard,
Theo Walter,
Johannes Heinsoo,
Yves Salathé,
Abdulkadir Akin,
Simon Storz,
Jean-Claude Besse,
Simone Gasparinetti,
Alexandre Blais,
Andreas Wallraff
Abstract:
Heralding techniques are useful in quantum communication to circumvent losses without resorting to error correction schemes or quantum repeaters. Such techniques are realized, for example, by monitoring for photon loss at the receiving end of the quantum link while not disturbing the transmitted quantum state. We describe and experimentally benchmark a scheme that incorporates error detection in a…
▽ More
Heralding techniques are useful in quantum communication to circumvent losses without resorting to error correction schemes or quantum repeaters. Such techniques are realized, for example, by monitoring for photon loss at the receiving end of the quantum link while not disturbing the transmitted quantum state. We describe and experimentally benchmark a scheme that incorporates error detection in a quantum channel connecting two transmon qubits using traveling microwave photons. This is achieved by encoding the quantum information as a time-bin superposition of a single photon, which simultaneously realizes high communication rates and high fidelities. The presented scheme is straightforward to implement in circuit QED and is fully microwave-controlled, making it an interesting candidate for future modular quantum computing architectures.
△ Less
Submitted 19 November, 2018;
originally announced November 2018.
-
Engineering cryogenic setups for 100-qubit scale superconducting circuit systems
Authors:
Sebastian Krinner,
Simon Storz,
Philipp Kurpiers,
Paul Magnard,
Johannes Heinsoo,
Raphael Keller,
Janis Luetolf,
Christopher Eichler,
Andreas Wallraff
Abstract:
A robust cryogenic infrastructure in form of a wired, thermally optimized dilution refrigerator is essential for present and future solid-state based quantum processors. Here, we engineer an extensible cryogenic setup, which minimizes passive and active heat loads, while guaranteeing rapid qubit control and readout. We review design criteria for qubit drive lines, flux lines, and output lines used…
▽ More
A robust cryogenic infrastructure in form of a wired, thermally optimized dilution refrigerator is essential for present and future solid-state based quantum processors. Here, we engineer an extensible cryogenic setup, which minimizes passive and active heat loads, while guaranteeing rapid qubit control and readout. We review design criteria for qubit drive lines, flux lines, and output lines used in typical experiments with superconducting circuits and describe each type of line in detail. The passive heat load of stainless steel and NbTi coaxial cables and the active load due to signal dissipation are measured, validating our robust and extensible concept for thermal anchoring of attenuators, cables, and other microwave components. Our results are important for managing the heat budget of future large-scale quantum computers based on superconducting circuits.
△ Less
Submitted 20 June, 2018;
originally announced June 2018.
-
Challenging local realism with human choices
Authors:
The BIG Bell Test Collaboration,
C. Abellán,
A. Acín,
A. Alarcón,
O. Alibart,
C. K. Andersen,
F. Andreoli,
A. Beckert,
F. A. Beduini,
A. Bendersky,
M. Bentivegna,
P. Bierhorst,
D. Burchardt,
A. Cabello,
J. Cariñe,
S. Carrasco,
G. Carvacho,
D. Cavalcanti,
R. Chaves,
J. Cortés-Vega,
A. Cuevas,
A. Delgado,
H. de Riedmatten,
C. Eichler,
P. Farrera
, et al. (83 additional authors not shown)
Abstract:
A Bell test is a randomized trial that compares experimental observations against the philosophical worldview of local realism. A Bell test requires spatially distributed entanglement, fast and high-efficiency detection and unpredictable measurement settings. Although technology can satisfy the first two of these requirements, the use of physical devices to choose settings in a Bell test involves…
▽ More
A Bell test is a randomized trial that compares experimental observations against the philosophical worldview of local realism. A Bell test requires spatially distributed entanglement, fast and high-efficiency detection and unpredictable measurement settings. Although technology can satisfy the first two of these requirements, the use of physical devices to choose settings in a Bell test involves making assumptions about the physics that one aims to test. Bell himself noted this weakness in using physical setting choices and argued that human `free will' could be used rigorously to ensure unpredictability in Bell tests. Here we report a set of local-realism tests using human choices, which avoids assumptions about predictability in physics. We recruited about 100,000 human participants to play an online video game that incentivizes fast, sustained input of unpredictable selections and illustrates Bell-test methodology. The participants generated 97,347,490 binary choices, which were directed via a scalable web platform to 12 laboratories on five continents, where 13 experiments tested local realism using photons, single atoms, atomic ensembles, and superconducting devices. Over a 12-hour period on 30 November 2016, participants worldwide provided a sustained data flow of over 1,000 bits per second to the experiments, which used different human-generated data to choose each measurement setting. The observed correlations strongly contradict local realism and other realistic positions in bipartite and tripartite scenarios. Project outcomes include closing the `freedom-of-choice loophole' (the possibility that the setting choices are influenced by `hidden variables' to correlate with the particle properties), the utilization of video-game methods for rapid collection of human generated randomness, and the use of networking techniques for global participation in experimental science.
△ Less
Submitted 9 November, 2018; v1 submitted 11 May, 2018;
originally announced May 2018.
-
Fast and Unconditional All-Microwave Reset of a Superconducting Qubit
Authors:
Paul Magnard,
Philipp Kurpiers,
Baptiste Royer,
Theo Walter,
Jean-Claude Besse,
Simone Gasparinetti,
Marek Pechal,
Johannes Heinsoo,
Simon Storz,
Alexandre Blais,
Andreas Wallraff
Abstract:
Active qubit reset is a key operation in many quantum algorithms, and particularly in error correction codes. Here, we experimentally demonstrate a reset scheme of a three level transmon artificial atom coupled to a large bandwidth resonator. The reset protocol uses a microwave-induced interaction between the $|f,0\rangle$ and $|g,1\rangle$ states of the coupled transmon-resonator system, with…
▽ More
Active qubit reset is a key operation in many quantum algorithms, and particularly in error correction codes. Here, we experimentally demonstrate a reset scheme of a three level transmon artificial atom coupled to a large bandwidth resonator. The reset protocol uses a microwave-induced interaction between the $|f,0\rangle$ and $|g,1\rangle$ states of the coupled transmon-resonator system, with $|g\rangle$ and $|f\rangle$ denoting the ground and second excited states of the transmon, and $|0\rangle$ and $|1\rangle$ the photon Fock states of the resonator. We characterize the reset process and demonstrate reinitialization of the transmon-resonator system to its ground state with $0.2\%$ residual excitation in less than $500 \, \rm{ns}$. Our protocol is of practical interest as it has no requirements on the architecture, beyond those for fast and efficient single-shot readout of the transmon, and does not require feedback.
△ Less
Submitted 23 January, 2018;
originally announced January 2018.
-
Deterministic Quantum State Transfer and Generation of Remote Entanglement using Microwave Photons
Authors:
Philipp Kurpiers,
Paul Magnard,
Theo Walter,
Baptiste Royer,
Marek Pechal,
Johannes Heinsoo,
Yves Salathé,
Abdulkadir Akin,
Simon Storz,
Jean-Claude Besse,
Simone Gasparinetti,
Alexandre Blais,
Andreas Wallraff
Abstract:
Sharing information coherently between nodes of a quantum network is at the foundation of distributed quantum information processing. In this scheme, the computation is divided into subroutines and performed on several smaller quantum registers connected by classical and quantum channels. A direct quantum channel, which connects nodes deterministically, rather than probabilistically, is advantageo…
▽ More
Sharing information coherently between nodes of a quantum network is at the foundation of distributed quantum information processing. In this scheme, the computation is divided into subroutines and performed on several smaller quantum registers connected by classical and quantum channels. A direct quantum channel, which connects nodes deterministically, rather than probabilistically, is advantageous for fault-tolerant quantum computation because it reduces the threshold requirements and can achieve larger entanglement rates. Here, we implement deterministic state transfer and entanglement protocols between two superconducting qubits fabricated on separate chips. Superconducting circuits constitute a universal quantum node capable of sending, receiving, storing, and processing quantum information. Our implementation is based on an all-microwave cavity-assisted Raman process which entangles or transfers the qubit state of a transmon-type artificial atom to a time-symmetric itinerant single photon. We transfer qubit states at a rate of $50 \, \rm{kHz}$ using the emitted photons which are absorbed at the receiving node with a probability of $98.1 \pm 0.1 \%$ achieving a transfer process fidelity of $80.02 \pm 0.07 \%$. We also prepare on demand remote entanglement with a fidelity as high as $78.9 \pm 0.1 \%$. Our results are in excellent agreement with numerical simulations based on a master equation description of the system. This deterministic quantum protocol has the potential to be used as a backbone of surface code quantum error correction across different nodes of a cryogenic network to realize large-scale fault-tolerant quantum computation in the circuit quantum electrodynamic architecture.
△ Less
Submitted 22 December, 2017;
originally announced December 2017.
-
Realizing Rapid, High-Fidelity, Single-Shot Dispersive Readout of Superconducting Qubits
Authors:
T. Walter,
P. Kurpiers,
S. Gasparinetti,
P. Magnard,
A. Potocnik,
Y. Salathe,
M. Pechal,
M. Mondal,
M. Oppliger,
C. Eichler,
A. Wallraff
Abstract:
The speed of quantum gates and measurements is a decisive factor for the overall fidelity of quantum protocols when performed on physical qubits with finite coherence time. Reducing the time required to distinguish qubit states with high fidelity is therefore a critical goal in quantum information science. The state-of-the-art readout of superconducting qubits is based on the dispersive interactio…
▽ More
The speed of quantum gates and measurements is a decisive factor for the overall fidelity of quantum protocols when performed on physical qubits with finite coherence time. Reducing the time required to distinguish qubit states with high fidelity is therefore a critical goal in quantum information science. The state-of-the-art readout of superconducting qubits is based on the dispersive interaction with a readout resonator. Here, we bring this technique to its current limit and demonstrate how the careful design of system parameters leads to fast and high-fidelity measurements without affecting qubit coherence. We achieve this result by increasing the dispersive interaction strength, by choosing an optimal linewidth of the readout resonator, by employing a Purcell filter, and by utilizing phase-sensitive parametric amplification. In our experiment, we measure 98.25% readout fidelity in only 48 ns, when minimizing read-out time, and 99.2% in 88 ns, when maximizing the fidelity, limited predominantly by the qubit lifetime of 7.6 us. The presented scheme is also expected to be suitable for integration into a multiplexed readout architecture.
△ Less
Submitted 25 January, 2017; v1 submitted 24 January, 2017;
originally announced January 2017.
-
Characterizing the attenuation of coaxial and rectangular microwave-frequency waveguides at cryogenic temperatures
Authors:
P. Kurpiers,
T. Walter,
P. Magnard,
Y. Salathe,
A. Wallraff
Abstract:
Low-loss waveguides are required for quantum communication at distances beyond the chip-scale for any low-temperature solid-state implementation of quantum information processors. We measure and analyze the attenuation constant of commercially available microwave-frequency waveguides down to millikelvin temperatures and single photon levels. More specifically, we characterize the frequency-depende…
▽ More
Low-loss waveguides are required for quantum communication at distances beyond the chip-scale for any low-temperature solid-state implementation of quantum information processors. We measure and analyze the attenuation constant of commercially available microwave-frequency waveguides down to millikelvin temperatures and single photon levels. More specifically, we characterize the frequency-dependent loss of a range of coaxial and rectangular microwave waveguides down to $0.005\,\rm{dB}/\rm{m}$ using a resonant-cavity technique. We study the loss tangent and relative permittivity of commonly used dielectric waveguide materials by measurements of the internal quality factors and their comparison with established loss models. The results of our characterization are relevant for accurately predicting the signal levels at the input of cryogenic devices, for reducing the loss in any detection chain, and for estimating the heat load induced by signal dissipation in cryogenic systems.
△ Less
Submitted 23 December, 2016;
originally announced December 2016.