-
Stochastic Gravitational Wave Background Detection through NANOGrav 15-year Data Set in the View of Massive Gravity
Authors:
Chris Choi,
Jacob Magallanes,
Murman Gurgenidze,
Tina Kahniashvili
Abstract:
Convincing evidence of a stochastic gravitational wave (GW) background has been found by the NANOGrav collaboration in the 15-year data set. From this signal, we can evaluate the possibility of its source being from the early universe through the tensor perturbations induced by a massive spin-2 graviton field. We consider a time-dependent model of the minimal theory of massive gravity (MG), and fi…
▽ More
Convincing evidence of a stochastic gravitational wave (GW) background has been found by the NANOGrav collaboration in the 15-year data set. From this signal, we can evaluate the possibility of its source being from the early universe through the tensor perturbations induced by a massive spin-2 graviton field. We consider a time-dependent model of the minimal theory of massive gravity (MG), and find values of the graviton mass, mass cutoff time, and Hubble rate of inflation that amplify the energy spectra of primordial GWs sufficiently to reproduce the signal from the NANOGrav data within 1-3 standard deviation. However, a suppression mechanism for high frequency modes must be introduced to conservatively obey the big bang nucleosynthesis (BBN) bound. While there are regions of the parameter space that reproduce the signal, it remains a challenge to simultaneously respect the BBN and cosmic microwave background (CMB) bounds without making the graviton mass cutoff time too deep into the matter dominated era.
△ Less
Submitted 16 December, 2023; v1 submitted 6 December, 2023;
originally announced December 2023.
-
Effects of odderon spin on helicity amplitudes in $pp$ elastic scattering
Authors:
Prin Sawasdipol,
**gle B. Magallanes,
Chakrit Pongkitivanichkul,
Daris Samart
Abstract:
In recent years, the discovery of the odderon, a colorless $C$-odd gluonic compound, has been confirmed in the TOTEM and D0 collaborations. However, the spin quantum number of the odderon remains unidentified. In this work, we aim to attribute a spin of $J=3$ to the odderon in $pp$ elastic scattering by calculating the helicity amplitudes and the corresponding complex parameter $r_5$, the ratio of…
▽ More
In recent years, the discovery of the odderon, a colorless $C$-odd gluonic compound, has been confirmed in the TOTEM and D0 collaborations. However, the spin quantum number of the odderon remains unidentified. In this work, we aim to attribute a spin of $J=3$ to the odderon in $pp$ elastic scattering by calculating the helicity amplitudes and the corresponding complex parameter $r_5$, the ratio of helicity's single-flip to non-flip amplitudes, for the spin-3 tensor odderon with the standard spin-2 tensor pomeron exchanges. Then, we apply these results to the constraints obtained from the STAR experiment at RHIC. By comparing to the contributions of the spin-1 vector odderon and spin-2 tensor pomeron, we demonstrate that the spin-3 tensor odderon, i.e. $J=3$, provides a better explanation for the observable in $pp$ elastic scattering.
△ Less
Submitted 4 August, 2023;
originally announced August 2023.
-
Odderon as Regge oddball spin-3 in $pp$ and $p\bar p$ elastic scattering
Authors:
**gle B. Magallanes,
Prin Sawasdipol,
Chakrit Pongkitivanichkul,
Daris Samart
Abstract:
In this work, we propose that the odderon is a Regge odd-glueball tensor spin-3. To demonstrate our proposal, we study the $pp$ and $p\bar p$ elastic scattering by including contributions of the spin-3 odderon and spin-2 pomeron exchange in the processes. The phenomenological effective Lagrangian approach is used to calculate the $pp$ and $p\bar p$ elastic scattering amplitudes at the tree level.…
▽ More
In this work, we propose that the odderon is a Regge odd-glueball tensor spin-3. To demonstrate our proposal, we study the $pp$ and $p\bar p$ elastic scattering by including contributions of the spin-3 odderon and spin-2 pomeron exchange in the processes. The phenomenological effective Lagrangian approach is used to calculate the $pp$ and $p\bar p$ elastic scattering amplitudes at the tree level. In addition, a Donnachie-Landschoff ansatz of the odderon and pomeron propagators has been used in this work. We fit the theoretical results with the various experimental data of the $pp$ and $p\bar p$ scattering at the TeV scale to determine the model parameters in the present work. By using the model parameters, the Chew-Frautschi plot of the tensor odderon Regge trajectory is evaluated. As a result, the odderon spin-3 mass is predicted to be 3.2 GeV. In addition, the total cross-section of our model is compatible with the results from TOTEM and its extrapolation from D0 collaboration. Moreover, the total cross-section also satisfies the Friossart bound at the Regge limit.
△ Less
Submitted 29 July, 2023; v1 submitted 21 December, 2022;
originally announced December 2022.
-
Accelerating DNN Training with Structured Data Gradient Pruning
Authors:
Bradley McDanel,
Helia Dinh,
John Magallanes
Abstract:
Weight pruning is a technique to make Deep Neural Network (DNN) inference more computationally efficient by reducing the number of model parameters over the course of training. However, most weight pruning techniques generally does not speed up DNN training and can even require more iterations to reach model convergence. In this work, we propose a novel Structured Data Gradient Pruning (SDGP) meth…
▽ More
Weight pruning is a technique to make Deep Neural Network (DNN) inference more computationally efficient by reducing the number of model parameters over the course of training. However, most weight pruning techniques generally does not speed up DNN training and can even require more iterations to reach model convergence. In this work, we propose a novel Structured Data Gradient Pruning (SDGP) method that can speed up training without impacting model convergence. This approach enforces a specific sparsity structure, where only N out of every M elements in a matrix can be nonzero, making it amenable to hardware acceleration. Modern accelerators such as the Nvidia A100 GPU support this type of structured sparsity for 2 nonzeros per 4 elements in a reduction. Assuming hardware support for 2:4 sparsity, our approach can achieve a 15-25\% reduction in total training time without significant impact to performance. Source code and pre-trained models are available at \url{https://github.com/BradMcDanel/sdgp}.
△ Less
Submitted 1 February, 2022;
originally announced February 2022.
-
Sequen-C: A Multilevel Overview of Temporal Event Sequences
Authors:
Jessica Magallanes,
Tony Stone,
Paul D Morris,
Suzanne Mason,
Steven Wood,
Maria-Cruz Villa-Uriol
Abstract:
Building a visual overview of temporal event sequences with an optimal level-of-detail (i.e. simplified but informative) is an ongoing challenge - expecting the user to zoom into every important aspect of the overview can lead to missing insights. We propose a technique to build a multilevel overview of event sequences, whose granularity can be transformed across sequence clusters (vertical level-…
▽ More
Building a visual overview of temporal event sequences with an optimal level-of-detail (i.e. simplified but informative) is an ongoing challenge - expecting the user to zoom into every important aspect of the overview can lead to missing insights. We propose a technique to build a multilevel overview of event sequences, whose granularity can be transformed across sequence clusters (vertical level-of-detail) or longitudinally (horizontal level-of-detail), using hierarchical aggregation and a novel cluster data representation Align-Score-Simplify. By default, the overview shows an optimal number of sequence clusters obtained through the average silhouette width metric - then users are able to explore alternative optimal sequence clusterings. The vertical level-of-detail of the overview changes along with the number of clusters, whilst the horizontal level-of-detail refers to the level of summarization applied to each cluster representation. The proposed technique has been implemented into a visualization system called Sequence Cluster Explorer (Sequen-C) that allows multilevel and detail-on-demand exploration through three coordinated views, and the inspection of data attributes at cluster, unique sequence, and individual sequence level. We present two case studies using real-world datasets in the healthcare domain: CUREd and MIMIC-III; which demonstrate how the technique can aid users to obtain a summary of common and deviating pathways, and explore data attributes for selected patterns.
△ Less
Submitted 6 August, 2021;
originally announced August 2021.
-
Elastic dcs of ep-scattering fitted via the dcs of eq-scatterings with cloud-covering effects
Authors:
**gle B. Magallanes,
**ky B. Bornales,
René Luna-García
Abstract:
The angular-averaged differential cross section (dcs) of the elastic electron proton (ep) scattering, covering Q^2 < 1.0GeV^2, was fitted via a combined modified eq-scatterings where q is a point particle. The modifications represent the cloud-covering effects to q. An energy-decaying ratio (edr) was derived by inspecting the generated dcs ep from the form factor data gathered at Mainz Microtron (…
▽ More
The angular-averaged differential cross section (dcs) of the elastic electron proton (ep) scattering, covering Q^2 < 1.0GeV^2, was fitted via a combined modified eq-scatterings where q is a point particle. The modifications represent the cloud-covering effects to q. An energy-decaying ratio (edr) was derived by inspecting the generated dcs ep from the form factor data gathered at Mainz Microtron (A1-Collaboration) and Continuous Electron Beam Accelerator Facility (Jefferson Laboratory) when compared to the dcs eq with modified relativistic recoil factor. The diminishing cloud layer, edr, has a decay rate of -2.8 for the data sets under investigation. The formulated SBM and SEM fitting models use the bare and effective u and d-quark masses, respectively, while SCBM and SCEM integrate other considerations. Three comparison methods were used and all of them favor the models with other additional considerations. SCEM was the most favored model in general.
△ Less
Submitted 8 January, 2021;
originally announced January 2021.
-
Analyzing Time Attributes in Temporal Event Sequences
Authors:
Jessica Magallanes,
Lindsey van Gemeren,
Steven Wood,
Maria-Cruz Villa-Uriol
Abstract:
Event data is present in a variety of domains such as electronic health records, daily living activities and web clickstream records. Current visualization methods to explore event data focus on discovering sequential patterns but present limitations when studying time attributes in event sequences. Time attributes are especially important when studying waiting times or lengths of visit in patient…
▽ More
Event data is present in a variety of domains such as electronic health records, daily living activities and web clickstream records. Current visualization methods to explore event data focus on discovering sequential patterns but present limitations when studying time attributes in event sequences. Time attributes are especially important when studying waiting times or lengths of visit in patient flow analysis. We propose a visual analytics methodology that allows the identification of trends and outliers in respect of duration and time of occurrence in event sequences. The proposed method presents event data using a single Sequential and Time Patterns overview. User-driven alignment by multiple events, sorting by sequence similarity and a novel visual encoding of events allows the comparison of time trends across and within sequences. The proposed visualization allows the derivation of findings that otherwise could not be obtained using traditional visualizations. The proposed methodology has been applied to a real-world dataset provided by Sheffield Teaching Hospitals NHS Foundation Trust, for which four classes of conclusions were derived.
△ Less
Submitted 2 August, 2019;
originally announced August 2019.
-
Quasi-static and Dynamic Behavior of Additively Manufactured Metallic Lattice Cylinders
Authors:
Hossein Sadeghi,
Dhruv Bhate,
Joseph Abraham,
Joseph Magallanes
Abstract:
Lattice structures have tailorable mechanical properties which allows them to exhibit superior mechanical properties (per unit weight) beyond what is achievable through natural materials. In this paper, quasi-static and dynamic behavior of additively manufactured stainless steel lattice cylinders is studied. Cylindrical samples with internal lattice structure are fabricated by a laser powder bed f…
▽ More
Lattice structures have tailorable mechanical properties which allows them to exhibit superior mechanical properties (per unit weight) beyond what is achievable through natural materials. In this paper, quasi-static and dynamic behavior of additively manufactured stainless steel lattice cylinders is studied. Cylindrical samples with internal lattice structure are fabricated by a laser powder bed fusion system. Equivalent hollow cylindrical samples with the same length, outer diameter, and mass (larger wall thickness) are also fabricated. Split Hopkinson bar is used to study the behavior of the specimens under high strain rate loading. It is observed that lattice cylinders reduce the transmitted wave amplitude up to about 21% compared to their equivalent hollow cylinders. However, the lower transmitted wave energy in lattice cylinders comes at the expense of a greater reduction in their stiffness, when compared to their equivalent hollow cylinder. In addition, it is observed that increasing the loading rate by five orders of magnitude leads to up to about 36% increase in the peak force that the lattice cylinder can carry, which is attributed to strain rate hardening effect in the bulk stainless steel material. Finite element simulations of the specimens under dynamic loads are performed to study the effect of strain rate hardening, thermal softening, and the failure mode on dynamic behavior of the specimens. Numerical results are compared with experimental data and good qualitative agreement is observed.
△ Less
Submitted 16 January, 2018;
originally announced January 2018.
-
Modeling the thermo-mechanical behavior of a woven ceramic matrix composite at high temperatures
Authors:
Koffi Enakoutsa,
Youssef Hammi,
John E. Crawford,
Joseph Abraham,
Joe Magallanes
Abstract:
This paper aimed at extending a model developed by Ladeveze to capture thermal expansion and coupled thermo-mechanical phenomena, as such as those encountered at elevated and extreme temperatures. In the new model a linear thermal expansion coefficient is added to equation of state to account for the thermal to mechanical coupling effects. The mechanical to thermal effects are introduced by assumi…
▽ More
This paper aimed at extending a model developed by Ladeveze to capture thermal expansion and coupled thermo-mechanical phenomena, as such as those encountered at elevated and extreme temperatures. In the new model a linear thermal expansion coefficient is added to equation of state to account for the thermal to mechanical coupling effects. The mechanical to thermal effects are introduced by assuming an internal heat generation due to residual strain effects. The constitutive relations of the coupled thermo-mechanical behaviors of ceramic matrix composite material model were incorporated into Abaqus finite element code as user defined material software. An extension of the methodology presented by Letombes to calibrate the ceramic matrix composite damage model parameters based on a woven silicon-carbide silicon-carbide material developed by Safran Group. Feasibility tests (tension-compression, tension-tension cyclic, simple tension tests) based on a dog bone and open hole specimen tests demonstrated a good capturing of nonlinear as well as coupled thermos-mechanical behaviors in the silicon-carbide silicon-carbide material.
△ Less
Submitted 26 September, 2016;
originally announced September 2016.
-
Time-dependent community structure in legislation cosponsorship networks in the Congress of the Republic of Peru
Authors:
Sang Hoon Lee,
José Manuel Magallanes,
Mason A. Porter
Abstract:
We study community structure in time-dependent legislation cosponsorship networks in the Peruvian Congress, and we compare them briefly to legislation cosponsorship networks in the US Senate. To study these legislatures, we employ a multilayer representation of temporal networks in which legislators in each layer are connected to each other with a weight that is based on how many bills they cospon…
▽ More
We study community structure in time-dependent legislation cosponsorship networks in the Peruvian Congress, and we compare them briefly to legislation cosponsorship networks in the US Senate. To study these legislatures, we employ a multilayer representation of temporal networks in which legislators in each layer are connected to each other with a weight that is based on how many bills they cosponsor. We then use multilayer modularity maximization to detect communities in these networks. From our computations, we are able to capture power shifts in the Peruvian Congress during 2006--2011. For example, we observe the emergence of 'opportunists', who switch from one community to another, as well as cohesive legislative communities whose initial component legislators never change communities. Interestingly, many of the opportunists belong to the group that won the majority in Congress.
△ Less
Submitted 1 March, 2017; v1 submitted 4 October, 2015;
originally announced October 2015.