Showing 1–50 of 70 results for author: Maezono, R

Locality Error Free Effective Core Potentials for 3d Transition Metal Elements Developed for the Diffusion Monte Carlo Method

Authors: Tom Ichibha, Yutaka Nikaido, M. Chandler Bennett, Jaron T. Krogel, Kenta Hongo, Ryo Maezono, Fernando A. Reboredo

Abstract: Pseudopotential locality errors have hampered the applications of the diffusion Monte Carlo (DMC) method in materials containing transition metals, in particular oxides. We have developed locality error free effective core potentials, pseudo-Hamiltonians, for transition metals ranging from Cr to Zn. We have modified a procedure published by some of us in [M.C. Bennett et al, JCTC 18 (2022)]. We ca… ▽ More Pseudopotential locality errors have hampered the applications of the diffusion Monte Carlo (DMC) method in materials containing transition metals, in particular oxides. We have developed locality error free effective core potentials, pseudo-Hamiltonians, for transition metals ranging from Cr to Zn. We have modified a procedure published by some of us in [M.C. Bennett et al, JCTC 18 (2022)]. We carefully optimized our pseudo-Hamiltonians and achieved transferability errors comparable to the best semilocal pseudopotentials used with DMC but without incurring in locality errors. Our pseudo-Hamiltonian set (named OPH23) bears the potential to significantly improve the accuracy of many-body-first-principles calculations in fundamental science research of complex materials involving transition metals. △ Less

Submitted 12 October, 2023; originally announced October 2023.

First-Principles-Based Insight into Electrochemical Reactivity in a Cobalt-Carbonate-Hydrate Pseudocapacitor

Authors: Kenji Oqmhula, Takahiro Toma, Ryo Maezono, Kenta Hongo

Abstract: Cobalt carbonate hydroxide (CCH) is a pseudocapacitive material with remarkably high capacitance and cycle stability. Previously, it was reported that CCH pseudocapacitive materials are orthorhombic in nature. Recent structural characterization has revealed that they are hexagonal in nature; however, their H positions still remain unclear. In this work, we carried out first-principles simulations… ▽ More Cobalt carbonate hydroxide (CCH) is a pseudocapacitive material with remarkably high capacitance and cycle stability. Previously, it was reported that CCH pseudocapacitive materials are orthorhombic in nature. Recent structural characterization has revealed that they are hexagonal in nature; however, their H positions still remain unclear. In this work, we carried out first-principles simulations to identify the H positions. Through the simulations, we could consider various fundamental deprotonation reactions inside the crystal and computationally evaluate the electromotive forces (EMF) of the deprotonation ($V_\mathrm{dp}$). Compared with the experimental potential window of the reaction ($< 0.6$ V (vs. saturated calomel electrode (SCE))), the computed $V_\mathrm{dp}$ (vs. SCE) value ($3.05$ V) was beyond the potential window, indicating that deprotonation never occurred inside the crystal. This may be attributed to the strongly formed hydrogen-bonds (H-bonds) in the crystal, thereby leading to the structural stabilization. We further investigated the crystal anisotropy in an actual capacitive material by considering the growth mechanism of the CCH crystal. By associating our X-ray diffraction (XRD) peak simulations with experimental structural analysis, we found that the H-bonds formed between CCH $\{(\bar{1}\bar{1}\bar{1}), (2\bar{1}\bar{1}), (2\bar{1}1)\}$ planes (approximately parallel to $ab$-plane) can result in 1-D growth (stacked along with $c$-axis). △ Less

Submitted 21 December, 2022; originally announced December 2022.

Towards chemical accuracy using the Jastrow correlated antisymmetrized geminal power ansatz

Authors: Abhishek Raghav, Ryo Maezono, Kenta Hongo, Sandro Sorella, Kousuke Nakano

Abstract: Herein, we report accurate atomization energy calculations for 55 molecules in the Gaussian-2 (G2) set using lattice regularized diffusion Monte Carlo (LRDMC). We compare the Jastrow-Slater determinant ansatz with a more flexible JsAGPs (Jastrow correlated antisymmetrized geminal power with singlet correlation) ansatz. AGPs is built from pairing functions, which explicitly include pairwise correla… ▽ More Herein, we report accurate atomization energy calculations for 55 molecules in the Gaussian-2 (G2) set using lattice regularized diffusion Monte Carlo (LRDMC). We compare the Jastrow-Slater determinant ansatz with a more flexible JsAGPs (Jastrow correlated antisymmetrized geminal power with singlet correlation) ansatz. AGPs is built from pairing functions, which explicitly include pairwise correlations among electrons and hence, this ansatz is expected to be more efficient in recovering the correlation energy. The AGPs wave functions are first optimized at the variational Monte Carlo (VMC) level, which includes both the Jastrow factor and the nodal surface optimization. This is followed by the LRDMC projection of the ansatz. Remarkably, for many molecules, the LRDMC atomization energies obtained using the JsAGPs ansatz reach chemical accuracy ($\sim$1 kcal/mol) and for most other molecules, the atomization energies are accurate within $\sim$5 kcal/mol. We obtained a mean absolute deviation of 1.6 kcal/mol with JsAGPs and 3.2 kcal/mol with JDFT (Jastrow factor + Slater determinant with DFT orbitals) ansatz. This work shows the effectiveness of the flexible AGPs ansatz for atomization energy calculations and electronic structure simulations in general. △ Less

Submitted 28 March, 2023; v1 submitted 10 November, 2022; originally announced November 2022.

Comments: 15 pages, 4 figures, JCTC accepted version after peer-review

(La,Th)H$_{10}$: the potential high-$T_{c}$ superconductors stabilized thermodynamically below 200 GPa

Authors: Peng Song, Zhufeng Hou, Kenta Hongo, Ryo Maezono

Abstract: The recent high-pressure experimental discovery of superconductivity in (La,Y)H$_{10}$, (La,Ce)H$_{9}$, (La,Ce)H$_{10}$, (Y,Ce)H$_{9}$, and (La,Nd)H$_{10}$ shows that the ternary rare-earth clathrate hydride can be promising candidate for high-temperature superconductor. In this work, we theoretically demonstrate that the combination of actinide-metal thorium (Th) and rare-earth-metal lanthanum (L… ▽ More The recent high-pressure experimental discovery of superconductivity in (La,Y)H$_{10}$, (La,Ce)H$_{9}$, (La,Ce)H$_{10}$, (Y,Ce)H$_{9}$, and (La,Nd)H$_{10}$ shows that the ternary rare-earth clathrate hydride can be promising candidate for high-temperature superconductor. In this work, we theoretically demonstrate that the combination of actinide-metal thorium (Th) and rare-earth-metal lanthanum (La) with hydrogen can also form some ternary hydrides with cage-like structures to be stable at 200 GPa. Using the evolutionary algorithms combined with the first-principles calculations, we have predicted the pressure-dependent ternary phase diagram of La$_{x}$Th$_{y}$H$_{z}$, particularly including the case of (La$_{1-x}$Th$_{x}$)H$_{n}$ [or designated as (La,Th)H$_{n}$ for simplicity]. Our calculations show that the hydrogen-rich phases such as (La,Th)H$_{9}$ (only including $P\bar{6}m2$-LaThH$_{18}$) and (La,Th)H$_{10}$ (including $I4/mmm$-La$_{3}$ThH$_{40}$, $R\bar{3}m$-LaThH$_{20}$, and $I4/mmm$-LaTh$_{3}$H$_{40}$) with H$_{29}$ and H$_{32}$ cages can be thermodynamically stable below 200 GPa. However, the phase decomposition can happen to only (La,Th)H$_{9}$ when the pressure is above 150 GPa. More importantly, the electron-phonon coupling (EPC) calculations show that the (La,Th)H$_{10}$ series could the potential superconductors, of which $I4/mmm$-La$_{3}$ThH$_{40}$ at 200 GPa exhibits the large EPC constant $λ$ = 2.46 with a highest transition temperature ($T_\mathrm{c}$) of 210 K. Since there are few previous studies on ternary hydrides composed of actinide metals, the present work would greatly stimulate the further discovery of this type of ternary hydrides and provide useful guidance for the high-pressure experimental studies on them. △ Less

Submitted 18 October, 2022; v1 submitted 12 October, 2022; originally announced October 2022.

Comments: 3 figures

High-pressure BaCN$_2$ phases explored by genetic algorithm

Authors: Peng Song, Mari Kawaguchi, Yuji Masubuchi, Kenji Oqmhula, Kousuke Nakano, Ryo Maezono, Kenta Hongo

Abstract: Polymers containing nitrogen have attracted much attention in connection with their application to high energy density materials (HEDMs), in which energy is inherent in the triple bond. It is an interesting question whether such polymerized phases appear in the high-pressure phase of metal carbodiimide MCN$_2$, of which synthesis have been reported in recent years, but few studies have investigate… ▽ More Polymers containing nitrogen have attracted much attention in connection with their application to high energy density materials (HEDMs), in which energy is inherent in the triple bond. It is an interesting question whether such polymerized phases appear in the high-pressure phase of metal carbodiimide MCN$_2$, of which synthesis have been reported in recent years, but few studies have investigated the crystal structure at high pressure. We have adopted a structure search based on the genetic algorithm coupled with ab initio electronic structure calculations to investigate possible crystal structures that may appear in the high-pressure phase of BaCN$_2$. The structure search successfully reproduced the previously reported crystal structures in the lower pressure range. With confirmed reliability of its predictive ability, the genetic search further predicts a polymerized phase with Ima2 appearing at higher pressure above 42 GPa. The polymerized phase takes the structure of a linear network of CN$_3$ planar triangular units. It is understood that the anion site units CN$_2$, which are close to each other under high pressure, form covalent bonds directly with each other and stabilize the phase. △ Less

Submitted 13 July, 2022; originally announced July 2022.

Comments: 8 pages, 5 figures

Electronic structure and effective mass analysis of doped TiO$_2$ (anatase) systems using DFT+$U$

Authors: Abhishek Raghav, Kenta Hongo, Ryo Maezono, Emila Panda

Abstract: In this work, electronic structure of several doped TiO$_2$ anatase systems is computed using DFT+$U$. Effective masses of charge carriers are also computed to quantify how the dopant atoms perturb the bands of the host anatase material. $U$ is computed systematically for all the dopants using the linear response method rather than using fitting procedures to physically known quantities. A combina… ▽ More In this work, electronic structure of several doped TiO$_2$ anatase systems is computed using DFT+$U$. Effective masses of charge carriers are also computed to quantify how the dopant atoms perturb the bands of the host anatase material. $U$ is computed systematically for all the dopants using the linear response method rather than using fitting procedures to physically known quantities. A combination of $d$ and $f$ block elements (Nb, Ta, V, Mo, W, Cr, La, Cu, Co and Ce) are considered as dopants. Depending upon the energies of their outer $d$ or $f$ electrons, the dopants are found to form defect states at various positions in the band structure of host anatase system. Some dopants like Cr, Mo etc. form mid-gap states, which could reduce transparency. Other dopants like Nb, Ta and W are found to have the Fermi levels positioned near the conduction band edge, indicating these systems to exhibit $n$-type conductivity. From the effective mass analysis, dopants are found to increase the effective mass of charge carriers and the non-parabolic nature of bands. Based on electronic structure and effective mass analysis, Nb, Ta and W are identified to exhibit higher transparency and conductivity as compared to the other dopants considered here. The theoretical results presented here, increase our understanding and show the potential of dopants to alter the properties in anatase TiO$_2$. △ Less

Submitted 5 August, 2022; v1 submitted 15 May, 2022; originally announced May 2022.

Comments: Accepted version, 19 pages, 22 figures

Journal ref: Comput. Mater. Sci. 214 (2022) 111714

High-$T\rm_{c}$ superconductivity of clathrate Y$_{3}$EuH$_{24}$

Authors: Abdul Ghaffar, Peng Song, Kenta Hongo, Ryo Maezono

Abstract: Recent progress on theoretical predictions of ternary superhydrides and their subsequent experimental confirmations have introduced us with a new generation of superconductors, having the potential to realize the synthesis of the most anticipated room temperature superconductors. Motivated by the recent high pressure experiment on YH$_6$ and EuH$_6$, we have theoretically examined the stability as… ▽ More Recent progress on theoretical predictions of ternary superhydrides and their subsequent experimental confirmations have introduced us with a new generation of superconductors, having the potential to realize the synthesis of the most anticipated room temperature superconductors. Motivated by the recent high pressure experiment on YH$_6$ and EuH$_6$, we have theoretically examined the stability as well as superconductivity by mixing the two compounds. Here we identified four phases capable of maintaining thermodynamic stability in the pressure range of 150-300 GPa, namely $Fm\bar{3}m$-Y$_{3}$EuH$_{24}$, $Cmmm$-YEuH$_{12}$, $Cmmm$-YEu$_{3}$H$_{24}$,$Immm$-YEu$_{3}$H$_{24}$. Among them, only $Fm\bar{3}m$-Y$_{3}$EuH$_{24}$ can maintain dynamically stability in the searched pressure range. The Allen-Dynes modified McMillan formula was used to further check the superconductivity of this phase, and the results reveal that the predicted superconducting transition temperature $T\rm_{c}$ of Y$_{3}$EuH$_{24}$ is approaching 220 K at 200 GPa. $Fm\bar{3}m$-Y$_{3}$EuH$_{24}$ has a nearly identical logarithmic average phonon frequency $ω_{log}$ to YH$_{6}$, but its electron-phonon coupling (EPC) constant $λ$ is somewhat smaller than YH$_{6}$'s 2.56, resulting in a lower ultimate $T_{c}$ value. △ Less

Submitted 12 May, 2022; v1 submitted 12 May, 2022; originally announced May 2022.

Comments: 5 figures

Potential high-$T_{c}$ superconductivity in YCeH$_{x}$ and LaCeH$_{x}$ under pressure

Authors: Peng Song, Zhufeng Hou, Kousuke Nakano, Kenta Hongo, Ryo Maezono

Abstract: Lanthanum, yttrium, and cerium hydrides are the three most well-known superconducting binary hydrides (La-H, Y-H, and Ce-H systems), which have gained great attention in both theoretical and experimental studies. Recent studies have shown that ternary hydrides composed of lanthanum and yttrium can achieve high superconductivity around 253 K. In this study we employ the evolutionary-algorithm-based… ▽ More Lanthanum, yttrium, and cerium hydrides are the three most well-known superconducting binary hydrides (La-H, Y-H, and Ce-H systems), which have gained great attention in both theoretical and experimental studies. Recent studies have shown that ternary hydrides composed of lanthanum and yttrium can achieve high superconductivity around 253 K. In this study we employ the evolutionary-algorithm-based crystal structure prediction (CSP) method and first-principles calculations to investigate the stability and superconductivity of ternary hydrides composed of (Y, Ce) and (La, Ce) under high pressure. Our calculations show that there are multiple stable phases in Y-Ce-H and La-Ce-H systems, among which $P4/mmm$-YCeH$_{8}$, $P\bar{6}m2$-YCeH$_{18}$, $R\bar{3}m$-YCeH$_{20}$, $P4/mmm$-LaCeH$_{8}$, and $R\bar{3}m$-LaCeH$_{20}$ possessing H$_{18}$, H$_{29}$ and H$_{32}$ clathrate structures can maintain both the thermodynamic and lattice-dynamic stabilities. In addition, we also find that these phases also maintain a strong resistance to decomposition at high temperature. Electron-phonon coupling calculations show that only three of these five phases can exhibit high-temperature superconductivity. The superconducting transition temperatures ($T_\mathrm{c}$) of $R\bar{3}m$-YCeH$_{20}$, $R\bar{3}m$-LaCeH$_{20}$, and $P\bar{6}m2$-YCeH$_{18}$ are predicted using the Allen-Dynes-modified McMillan formula to be 122 K at 300 GPa, 116 K at 250 GPa, and 173 K at 150 GPa, respectively. Moreover, the pressure to stabilize $P\bar{6}m2$-YCeH$_{18}$ can be lowered to 150 GPa, suggesting an accessible condition for its high-pressure synthesis. △ Less

Submitted 13 November, 2022; v1 submitted 4 April, 2022; originally announced April 2022.

Comments: 5 figures

Application of canonical augmentation to the atomic substitution problem

Authors: Genki I. Prayogo, Andrea Tirelli, Keishu Utimula, Kenta Hongo, Ryo Maezono, Kousuke Nakano

Abstract: A common approach for studying a solid solution or disordered system within a periodic ab-initio framework is to create a supercell in which a certain amount of target elements is substituted with other ones. The key to generating supercells is determining how to eliminate symmetry-equivalent structures from the large number of substitution patterns. Although the total number of substitutions is o… ▽ More A common approach for studying a solid solution or disordered system within a periodic ab-initio framework is to create a supercell in which a certain amount of target elements is substituted with other ones. The key to generating supercells is determining how to eliminate symmetry-equivalent structures from the large number of substitution patterns. Although the total number of substitutions is on the order of trillions, only symmetry-inequivalent atomic substitution patterns need to be identified, and their number is far smaller than the total. A straightforward solution would be to classify them after determining all possible patterns, but it is redundant and practically unfeasible. Therefore, to alleviate this drawback, we developed a new formalism based on the {\it canonical augmentation}, and successfully applied it to the atomic substitution problem. Our developed \verb|python| software package, which is called \textsc{SHRY} (\underline{S}uite for \underline{H}igh-th\underline{r}oughput generation of models with atomic substitutions implemented by p\underline{y}thon), enables us to pick up only symmetry-inequivalent structures from the vast number of candidates very efficiently. We demonstrate that the computational time required by our algorithm to find $N$ symmetry-inequivalent structures scales {\it linearly} with $N$ up to $\sim 10^9$. This is the best scaling for such problems. △ Less

Submitted 26 November, 2021; originally announced November 2021.

Comments: 40 pages

Diffusion Monte Carlo Study on Relative Stabilities of Boron Nitride Polymorphs

Authors: Yutaka Nikaido, Tom Ichibha, Kenta Hongo, Fernando A. Reboredo, K. C. Hari Kumar, Priya Mahadevan, Ryo Maezono, Kousuke Nakano

Abstract: Although Boron nitride (BN) is a well-known compound widely used for engineering and scientific purposes, the phase stability of its polymorphs, one of its most fundamental properties, is still under debate. The ab initio determination of the ground state of the BN polymorphs, such as hexagonal and zinc-blende, is difficult because of the elusive Van der Waals interaction, which plays a decisive r… ▽ More Although Boron nitride (BN) is a well-known compound widely used for engineering and scientific purposes, the phase stability of its polymorphs, one of its most fundamental properties, is still under debate. The ab initio determination of the ground state of the BN polymorphs, such as hexagonal and zinc-blende, is difficult because of the elusive Van der Waals interaction, which plays a decisive role in some of the polymorphs, making quantitative prediction highly challenging. Hence, despite multiple theoretical studies, there has been no consensus on the ground state yet, primarily due to contradicting reports. In this study, we apply a state-of-the-art ab initio framework - fixed-node diffusion Monte Carlo (FNDMC), to four well known BN polymorphs, namely hexagonal, rhombohedral, wurtzite, and zinc-blende BNs. Our FNDMC calculations show that hBN is thermodynamically the most stable among the four polymorphs at 0 K as well as at 300K. This result agrees with the experimental data of Corrigan~{\it et al.} and Fukunaga. The conclusions are consistent with those obtained using other high-level methods, such as coupled cluster. We demonstrate that the FNDMC is a powerful method to address polymorphs that exhibit bonds of various forms. It also provides valuable information, like reliable reference energies, when reliable experimental data are missing or difficult to access. Our findings should promote the application of FNDMC for other van der Waals materials. △ Less

Submitted 24 November, 2021; originally announced November 2021.

Comments: 11 pages

Candidate structure for the H$_2$-PRE phase of solid hydrogen

Authors: Tom Ichibha, Yunwei Zhang, Kenta Hongo, Ryo Maezono, Fernando A. Reboredo

Abstract: Experimental progress finally reached the metallic solid hydrogen phase, which was predicted by Wigner and Huntington over 80 years ago. However, the different structures in the phase diagram are still been debated due to the difficulty of diffraction experiments for high-pressured hydrogen. The determination of crystal structures under extreme condition is both of the basic condensed matter physi… ▽ More Experimental progress finally reached the metallic solid hydrogen phase, which was predicted by Wigner and Huntington over 80 years ago. However, the different structures in the phase diagram are still been debated due to the difficulty of diffraction experiments for high-pressured hydrogen. The determination of crystal structures under extreme condition is both of the basic condensed matter physics, and in planetary science: the behavior of giant gaseous planets (e.g. Jupiter, Saturn...) strongly depends on the properties of inner high-pressured hydrogen. This work describes new possible structures appearing under high pressures of 400$\sim$600 GPa. We applied a structural search using particle swarm optimization with density functional theory (DFT) to propose several candidate structures. For these structures, we performed fixed-node diffusion Monte Carlo simulations combined with DFT zero-point energy corrections to confirm their relative stability. We found $P2_{1}/c$-8 as a promising candidate structure for the H$_2$-PRE phase. $P2_{1}/c$-8 is predicted the most stable at 400 and 500~GPa. $P2_{1}/c$-8 reproduces qualitatively the IR spectrum peaks observed in the H$_2$-PRE phase. △ Less

Submitted 30 December, 2021; v1 submitted 22 November, 2021; originally announced November 2021.

Journal ref: Phys. Rev. B 104, 214111 (2021)

Anionic Ordering in Pb$_2$Ti$_4$O$_9$F$_2$ Revisited by Nuclear Magnetic Resonance and Density Functional Theory

Authors: Kengo Oka, Tom Ichibha, Daichi Kato, Yasuto Noda, Yusuke Tominaga, Kosei Yamada, Mitsunobu Iwasaki andNaoki Noma, Kenta Hongo, Ryo Maezono, Fernando A. Reboredo

Abstract: A combination of $^{19}$F magic angle spinning (MAS) nuclear magnetic resonance (NMR) and density functional theory (DFT) were used to study the ordering of F atoms in Pb$_2$Ti$_4$O$_9$F$_2$. This analysis revealed that F atoms predominantly occupy two of the six available inequivalent sites in a ratio of 73:27. DFT-based calculations explained the preference of F occupation on these sites and qua… ▽ More A combination of $^{19}$F magic angle spinning (MAS) nuclear magnetic resonance (NMR) and density functional theory (DFT) were used to study the ordering of F atoms in Pb$_2$Ti$_4$O$_9$F$_2$. This analysis revealed that F atoms predominantly occupy two of the six available inequivalent sites in a ratio of 73:27. DFT-based calculations explained the preference of F occupation on these sites and quantitatively reproduced the experimental occupation ratio, independent of the choice of functional. We concluded that the Pb atom's 6$s^2$ lone pair may play a role ($\sim$0.1 eV/f.u.) in determining the majority and minority F occupation sites with partial density of states and crystal orbital Hamiltonian population analyses applied to the DFT wave functions. △ Less

Submitted 27 September, 2022; v1 submitted 28 September, 2021; originally announced September 2021.

High-pressure Mg-Sc-H phase diagram and its superconductivity from first-principles calculations

Authors: Peng Song, Zhufeng Hou, Pedro Baptista de Castro, Kousuke Nakano, Kenta Hongo, Yoshihiko Takano, Ryo Maezono

Abstract: In this work, global search for crystal structures of ternary Mg-Sc-H hydrides (Mg$_x$Sc$_y$H$_z$) under high pressure ($100 \le P \le 200$ GPa) were performed using the evolutionary algorithm and first-principles calculations. Based on them, we computed the thermodynamic convex hull and pressure-dependent phase diagram of Mg$_x$Sc$_y$H$_z$ for $z/(x+y) < 4$. We have identified the stable crystal… ▽ More In this work, global search for crystal structures of ternary Mg-Sc-H hydrides (Mg$_x$Sc$_y$H$_z$) under high pressure ($100 \le P \le 200$ GPa) were performed using the evolutionary algorithm and first-principles calculations. Based on them, we computed the thermodynamic convex hull and pressure-dependent phase diagram of Mg$_x$Sc$_y$H$_z$ for $z/(x+y) < 4$. We have identified the stable crystal structures of four thermodynamically stable compounds with the higher hydrogen content, i.e., $R\bar{3}m$-MgScH$_{6}$, $C2/m$-Mg$_{2}$ScH$_{10}$, $Immm$-MgSc$_{2}$H$_{9}$ and $Pm\bar{3}m$-Mg(ScH$_{4}$)$_{3}$. Their superconducting transition temperatures were computationally predicted by the McMillan-Allen-Dynes formula combined with first-principles phonon calculations. They were found to exhibit superconductivity; among them, $R\bar{3}m$-MgScH$_{6}$ was predicted to have the highest $T_{c}$ (i.e. 23.34 K) at 200 GPa. △ Less

Submitted 14 September, 2021; originally announced September 2021.

Comments: 7 pages, 5 figures, 1 Supplemental Material

Using reinforcement learning to autonomously identify sources of error for agents in group missions

Authors: Keishu Utimula, Ken-taro Hayaschi, Trevor J. Bihl, Kenta Hongo, Ryo Maezono

Abstract: When agents swarm to execute a mission, some of them frequently exhibit sudden failure, as observed from the command base. It is generally difficult to determine whether a failure is caused by actuators (hypothesis, $h_a$) or sensors (hypothesis, $h_s$) by solely relying on the communication between the command base and concerning agent. However, by instigating collusion between the agents, the ca… ▽ More When agents swarm to execute a mission, some of them frequently exhibit sudden failure, as observed from the command base. It is generally difficult to determine whether a failure is caused by actuators (hypothesis, $h_a$) or sensors (hypothesis, $h_s$) by solely relying on the communication between the command base and concerning agent. However, by instigating collusion between the agents, the cause of failure can be identified; in other words, we expect to detect corresponding displacements for $h_a$ but not for $h_s$. In this study, we considered the question as to whether artificial intelligence can autonomously generate an action plan $\boldsymbol{g}$ to pinpoint the cause as aforedescribed. Because the expected response to $\boldsymbol{g}$ generally depends upon the adopted hypothesis [let the difference be denoted by $D(\boldsymbol{g})$], a formulation that uses $D\left(\boldsymbol{g}\right)$ to pinpoint the cause can be made. Although a $\boldsymbol{g}^*$ that maximizes $D(\boldsymbol{g})$ would be a suitable action plan for this task, such an optimization is difficult to achieve using the conventional gradient method, as $D(\boldsymbol{g})$ becomes nonzero in rare events such as collisions with other agents, and most swarm actions $\boldsymbol{g}$ give $D(\boldsymbol{g})=0$. In other words, throughout almost the entire space of $\boldsymbol{g}$, $D(\boldsymbol{g})$ has zero gradient, and the gradient method is not applicable. To overcome this problem, we formulated an action plan using Q-table reinforcement learning. Surprisingly, the optimal action plan generated via reinforcement learning presented a human-like solution to pinpoint the problem by colliding other agents with the failed agent. Using this simple prototype, we demonstrated the potential of applying Q-table reinforcement learning methods to plan autonomous actions to pinpoint the causes of failure. △ Less

Submitted 4 November, 2023; v1 submitted 19 July, 2021; originally announced July 2021.

Comments: It has been edited in English

The systematic study on the stability and superconductivity of Y-Mg-H compounds under high pressure

Authors: Peng Song, Zhufeng Hou, Pedro Baptista de Castro, Kousuke Nakano, Kenta Hongo, Yoshihiko Takano, Ryo Maezono

Abstract: Motivated by recent discovery of yttrium-based high-temperature ternary superconducting hydrides (e.g., CaYH$_{12}$, LaYH$_{12}$, and ScYH$_{6}$), we have employed evolutionary algorithm and first-principles calculations to comprehensively examine the structural stability and superconductivity of the YMgH$_{x}$ system at high pressure. The hydrogen content $x$ and the pressure are both important f… ▽ More Motivated by recent discovery of yttrium-based high-temperature ternary superconducting hydrides (e.g., CaYH$_{12}$, LaYH$_{12}$, and ScYH$_{6}$), we have employed evolutionary algorithm and first-principles calculations to comprehensively examine the structural stability and superconductivity of the YMgH$_{x}$ system at high pressure. The hydrogen content $x$ and the pressure are both important factors in the stability of these candidate structures. We find that the stability of hydrogen-rich materials frequently necessitates higher pressure. For instance, the pressures to stabilize $P4/mmm$-YMgH$_{8}$ and $Cmmm$-YMgH$_{12}$ are both more than 250 GPa. Hydrogen-less materials, such as $I4_{1}/amd$-YMgH$_{2}$ and $P6_{3}/mmc$-YMgH$_{3}$, can be stable at pressures as low as 100 GPa. In addition, we find a metastable structure for YMgH$_{6}$ with the same space group as the $P4/mmm$-YMgH$_{8}$. A metastable sodalite-like face-centered cubic (FCC) structure is also found in YMgH$_{12}$. These four clathrate structures of $P4/mmm$-YMgH$_{6}$, $P4/mmm$-YMgH$_{8}$, $Cmmm$-YMgH$_{12}$, and $Fd\bar{3}m$-YMgH$_{12}$ is made up of H14, H18, H24, and H24 cages, respectively, in which the H-H pair exhibits weak covalent bonding. According to phonon calculations, $P4/mmm$-YMgH$_{6}$ and $P4/mmm$-YMgH$_{8}$ require a pressure of 300 GPa to maintain dynamic stability, however $Cmmm$-YMgH$_{12}$ and $Fd\bar{3}m$-YMgH$_{12}$ can maintain dynamic stability at pressures of 200 GPa and 250 GPa, respectively. Electron-phonon coupling calculations indicate that they might be potential high-temperature superconductors, with superconductivity intimately linked to the H cage structure. The sodalite structure $Fd\bar{3}m$-YMgH$_{12}$ has a $T_\mathrm{c}$ value of 190 K and a strong electron-phonon coupling constant of 2.18. △ Less

Submitted 17 July, 2021; v1 submitted 12 July, 2021; originally announced July 2021.

Comments: 7 pages, 5 figures, 1 Supplemental Material

Peculiar atomic bond nature in platinum monatomic chains

Authors: Jiaqi Zhang, Keisuke Ishizuka, Masahiko Tomitori, Toyoko Arai, Kenta Hongo, Ryo Maezono, Erio Tosatti, Yoshifumi Oshima

Abstract: Metal atomic chains have been reported to change their electronic or magnetic properties by slight mechanical stimulus. However, the mechanical response has been veiled because of lack of information on the bond nature. Here, we clarify the bond nature in platinum (Pt) monatomic chains by our developed in-situ transmission electron microscope method. The stiffness is measured with sub N/m precisio… ▽ More Metal atomic chains have been reported to change their electronic or magnetic properties by slight mechanical stimulus. However, the mechanical response has been veiled because of lack of information on the bond nature. Here, we clarify the bond nature in platinum (Pt) monatomic chains by our developed in-situ transmission electron microscope method. The stiffness is measured with sub N/m precision by quartz length-extension resonator. The bond stiffnesses at the middle of the chain and at the connecting to the base are estimated to be 25 and 23 N/m, respectively, which are higher than the bulk counterpart. Interestingly, the bond length of 0.25 nm is found to be elastically stretched to 0.31 nm, corresponding to 24% in strain. Such peculiar bond nature could be explained by a novel concept of "string tension". This study is a milestone that will significantly change the way we think about atomic bonds in one-dimensional substance. △ Less

Submitted 30 April, 2021; originally announced April 2021.

Comments: 20pages, 4 figures

Journal ref: nano letters, 2021, 21, 9, 3922-3928

Importance of van der Waals interactions in hydrogen adsorption on a silicon-carbide nanotube revisited with vdW-DFT and quantum Monte Carlo

Authors: Genki I. Prayogo, Hyeondeok Shin, Anouar Benali, Ryo Maezono, Kenta Hongo

Abstract: DFT is a valuable tool for calculating adsorption energies toward designing materials for hydrogen storage. However, dispersion forces being absent from the theory, it remains unclear how the consideration of van der Waals (vdW) interactions affects such calculations. For the first time, we applied diffusion Monte Carlo (DMC) to evaluate the adsorption characteristics of a hydrogen molecule on a (… ▽ More DFT is a valuable tool for calculating adsorption energies toward designing materials for hydrogen storage. However, dispersion forces being absent from the theory, it remains unclear how the consideration of van der Waals (vdW) interactions affects such calculations. For the first time, we applied diffusion Monte Carlo (DMC) to evaluate the adsorption characteristics of a hydrogen molecule on a (5,5) armchair silicon-carbide nanotube (H$_2$-SiCNT). Within the framework of density functional theory (DFT), we also benchmarked various exchange-correlation functionals, including those recently developed for treating dispersion or vdW interactions. We found that the vdW-corrected DFT methods agree well with DMC, whereas the local (semilocal) functional significantly over (under)-binds. Furthermore, we fully optimized the H$_2$-SiCNT geometry within the DFT framework and investigated the correlation between structure and charge density. The vdW contribution to adsorption was found to be non-negligible at approximately 1 kcal/mol per hydrogen molecule, which amounts to 9-29 % of the ideal adsorption energy required for hydrogen storage applications. △ Less

Submitted 29 March, 2021; originally announced March 2021.

Comments: 7 pages, 3 figures

High-$T_c$ superconducting hydrides formed by LaH$_{24}$ and YH$_{24}$ cage structures as basic blocks

Authors: Peng Song, Zhufeng Hou, Pedro Baptista de Castro, Kousuke Nakano, Kenta Hongo, Yoshihiko Takano, Ryo Maezono

Abstract: Based on recent studies regarding high-temperature (high-$T_c$) La-Y ternary hydrides (e.g., $P{\bar{1}}$-La$_2$YH$_{12}$, $Pm{\bar{3}}m$-LaYH$_{12}$, and $Pm{\bar{3}}m$-(La,Y)H$_{10}$ with a maximum $T_c \sim 253$ K), we examined the phase and structural stabilities of the (LaH$_6$)(YH$_6$)$_y$ series as high-$T_c$ ternary hydride compositions using a genetic algorithm and $\it ab$ $\it initio$ c… ▽ More Based on recent studies regarding high-temperature (high-$T_c$) La-Y ternary hydrides (e.g., $P{\bar{1}}$-La$_2$YH$_{12}$, $Pm{\bar{3}}m$-LaYH$_{12}$, and $Pm{\bar{3}}m$-(La,Y)H$_{10}$ with a maximum $T_c \sim 253$ K), we examined the phase and structural stabilities of the (LaH$_6$)(YH$_6$)$_y$ series as high-$T_c$ ternary hydride compositions using a genetic algorithm and $\it ab$ $\it initio$ calculations. Our evaluation showed that the $Pm\bar{3}m$-LaYH$_{12}$ reported in the previous study was unstable during decomposition into $R\bar{3}c$-LaH$_{6}$ + $Im\bar{3}m$-YH$_{6}$. We also discovered new crystal structures, namely $Cmmm$-LaYH$_{12}$ ($y=1$), $R\bar{3}c$-LaYH$_{12}$ ($y=1$), $Cmmm$-LaY$_3$H$_{24}$ ($y=3$), and $R\bar{3}$-LaY$_3$H$_{24}$ ($y=3$), showing stability against such decomposition. While $R\bar{3}c$ ($y=1$) and $R\bar{3}$ ($y=3$) did not exhibit superconductivity owing to the extremely low density of states at the Fermi level, $Cmmm$ phases exhibited a $T_{c}$ of approximately 140~K at around 200~GPa owing to the extremely high electron--phonon coupling constant ($λ$ = 1.876 for LaYH$_{12}$). By the twice longer stacking for $Cmmm$-LaY$_3$H$_{24}$, the coupling constant increased owing to the chemical pressure of Y, leading to a slightly increased $T_{c}$. △ Less

Submitted 22 May, 2021; v1 submitted 11 March, 2021; originally announced March 2021.

Comments: 13 pages

High-$T_c$ ternary metal hydrides, YKH$_{12}$ and LaKH$_{12}$, discovered by machine learning

Authors: Peng Song, Zhufeng Hou, Pedro Baptista de Castro, Kousuke Nakano, Kenta Hongo, Kenta Hongo, Yoshihiko Takano, Ryo Maezono

Abstract: The search for hydride compounds that exhibit high $T_c$ superconductivity has been extensively studied. Within the range of binary hydride compounds, the studies have been developed well including data-driven searches as a topic of interest. Toward the search for the ternary systems, the number of possible combinations grows rapidly, and hence the power of data-driven search gets more prominent.… ▽ More The search for hydride compounds that exhibit high $T_c$ superconductivity has been extensively studied. Within the range of binary hydride compounds, the studies have been developed well including data-driven searches as a topic of interest. Toward the search for the ternary systems, the number of possible combinations grows rapidly, and hence the power of data-driven search gets more prominent. In this study, we constructed various regression models to predict $T_c$ for ternary hydride compounds and found the extreme gradient boosting (XGBoost) regression giving the best performance. The best performed regression predicts new promising candidates realizing higher $T_c$, for which we further identified their possible crystal structures. Confirming their lattice and thermodynamical stabilities, we finally predicted new ternary hydride superconductors, YKH$_{12}$ [$C2/m$ (No.12), $T_c$=143.2 K at 240 GPa] and LaKH$_{12}$ [$R\bar{3}m$ (No.166), $T_c$=99.2 K at 140 GPa] from first principles. △ Less

Submitted 27 February, 2021; originally announced March 2021.

Comments: 21 pages, 6 figures

Atomic forces by quantum Monte Carlo: application to phonon dispersion calculation

Authors: Kousuke Nakano, Tommaso Morresi, Michele Casula, Ryo Maezono, Sandro Sorella

Abstract: We report the first successful application of the {\it ab initio} quantum Monte Carlo (QMC) framework to a phonon dispersion calculation. A full phonon dispersion of diamond is successfully calculated at the variational Monte Carlo (VMC) level, based on the frozen-phonon technique. The VMC-phonon dispersion is in good agreement with the experimental results, giving renormalized harmonic optical fr… ▽ More We report the first successful application of the {\it ab initio} quantum Monte Carlo (QMC) framework to a phonon dispersion calculation. A full phonon dispersion of diamond is successfully calculated at the variational Monte Carlo (VMC) level, based on the frozen-phonon technique. The VMC-phonon dispersion is in good agreement with the experimental results, giving renormalized harmonic optical frequencies very close to the experimental values, by significantly improving upon density functional theory (DFT) in the generalized gradient approximation. Key to success for the QMC approach is the statistical error reduction in atomic force evaluation. We show that this can be achieved by using well conditioned atomic basis sets, by explicitly removing the basis-set redundancy, which reduces the statistical error of forces by up to two orders of magnitude. This leads to affordable and accurate QMC-phonons calculations, up to $10^{4}$ times more efficient than previous attempts, and paves the way to new applications, particularly in correlated materials, where phonons have been poorly reproduced so far. △ Less

Submitted 13 April, 2021; v1 submitted 2 December, 2020; originally announced December 2020.

Comments: 10 pages

Journal ref: Phys. Rev. B 103, L121110 (2021)

Diffusion Monte Carlo evaluation of disiloxane linearization barrier

Authors: Adie Tri Hanindriyo, Amit Kumar Singh Yadav, Tom Ichibha, Ryo Maezono, Kousuke Nakano, Kenta Hongo

Abstract: The disiloxane molecule is a prime example of silicate compounds containing the Si-O-Si bridge. The molecule is of significant interest within the field of quantum chemistry, owing to the difficulty in theoretically predicting its properties. Herein, the linearisation barrier of disiloxane is investigated using a fixed-node diffusion Monte Carlo (FNDMC) approach, which is currently the most reliab… ▽ More The disiloxane molecule is a prime example of silicate compounds containing the Si-O-Si bridge. The molecule is of significant interest within the field of quantum chemistry, owing to the difficulty in theoretically predicting its properties. Herein, the linearisation barrier of disiloxane is investigated using a fixed-node diffusion Monte Carlo (FNDMC) approach, which is currently the most reliable {\it ab initio} method in accounting for an electronic correlation. Calculations utilizing the density functional theory (DFT) and the coupled cluster method with single and double substitutions, including noniterative triples (CCSD(T))are carried out alongside FNDMC for comparison. Two families of basis sets are used to investigate the disiloxane linearisation barrier - Dunning's correlation-consistent basis sets cc-pV$x$Z ($x = $ D, T, and Q) and their core-valence correlated counterparts, cc-pCV$x$Z. It is concluded that FNDMC successfully predicts the disiloxane linearisation barrier and does not depend on the completeness of the basis sets as much as DFT or CCSD(T), thus establishing its suitability. △ Less

Submitted 1 April, 2021; v1 submitted 13 October, 2020; originally announced October 2020.

Ab-initio-based Interface Modeling and Statistical Analysis for Estimate of the Water Contact Angle on a Metallic Cu(111) Surface

Authors: Takahiro Murono, Kenta Hongo, Kousuke Nakano, Ryo Maezono

Abstract: Controlling the water contact angle on a surface is important for regulating its wettability in industrial applications, which involves develo** ab initio prediction scheme of accurately predicting the angle. The scheme requires structural models for the adsorption of liquid molecules on a surface, but their reliability depend on whether the surfaces comprise insulating or metallic materials. Pr… ▽ More Controlling the water contact angle on a surface is important for regulating its wettability in industrial applications, which involves develo** ab initio prediction scheme of accurately predicting the angle. The scheme requires structural models for the adsorption of liquid molecules on a surface, but their reliability depend on whether the surfaces comprise insulating or metallic materials. Previous ab initio studies have focused on the estimation of the water contact angle on insulators, where the periodic-honeycomb array of water molecules was adopted as the adsorption model for the water on the insulating surface and succeeded in the insulating cases. This study, however, focus on the water contact angle on a metallic surface, and propose a simple ab initio based estimation scheme. We not only adopt the previously proposed structural modeling based on the periodic-honyecomb array, but also consider an ensemble of isolated water oligomers that have different molecular coverage (ML) values. We established a statistic model to predict a contact angle of the water wetting on a Cu(111) surface: The coverage-dependent contact angles obtained from each of the isolated clusters was fit to a quadratic regression, and the contact angle was interpolated by referring to a ML value of water layer in literature. This interpolated value lay within the deviation of experimental angles. In addition, the Boltzmann-average over the isolated clusters was found to agree well with the interpolated one. This indicates that the Boltzmann-average is useful for estimating the contact angle of other metallic surfaces without knowing a ML value a priori. △ Less

Submitted 9 October, 2022; v1 submitted 24 September, 2020; originally announced September 2020.

Comments: 4 pages

Feature space of XRD patterns constructed by auto-encorder

Authors: Keishu Utimula, Masao Yano, Hiroyuki Kimoto, Kenta Hongo, Kousuke Nakano, Ryo Maezono

Abstract: It would be a natural expectation that only major peaks, not all of them, would make an important contribution to the characterization of the XRD pattern. We developed a scheme that can identify which peaks are relavant to what extent by using auto-encoder technique to construct a feature space for the XRD peak patterns. Individual XRD patterns are projected onto a single point in the two-dimensio… ▽ More It would be a natural expectation that only major peaks, not all of them, would make an important contribution to the characterization of the XRD pattern. We developed a scheme that can identify which peaks are relavant to what extent by using auto-encoder technique to construct a feature space for the XRD peak patterns. Individual XRD patterns are projected onto a single point in the two-dimensional feature space constructed using the method. If the point is significantly shifted when a peak of interest is masked, then we can say the peak is relevant for the characterization represented by the point on the space. In this way, we can formulate the relevancy quantitatively. By using this scheme, we actually found such a peak with a significant peak intensity but low relevancy in the characterization of the structure. The peak is not easily explained by the physical viewpoint such as the higher-order peaks from the same plane index, being a heuristic finding by the power of machine-learning. △ Less

Submitted 24 May, 2020; originally announced May 2020.

Boron phosphide as a \emph{p}-type transparent conductor: optical absorption and transport through electron-phonon coupling

Authors: Viet-Anh Ha, Bora Karasulu, Ryo Maezono, Guillaume Brunin, Joel Basile Varley, Gian-Marco Rignanese, Bartomeu Monserrat, Geoffroy Hautier

Abstract: Boron phosphide has recently been identified as a potential high hole mobility transparent conducting material. This promise arises from its low hole effective masses. However, BP has a relatively small 2 eV indirect band gap which will affect its transparency. In this work, we computationally study both optical absorption across the indirect gap and phonon-limited electronic transport to quantify… ▽ More Boron phosphide has recently been identified as a potential high hole mobility transparent conducting material. This promise arises from its low hole effective masses. However, BP has a relatively small 2 eV indirect band gap which will affect its transparency. In this work, we computationally study both optical absorption across the indirect gap and phonon-limited electronic transport to quantify the potential of boron phosphide as a \emph{p}-type transparent conductor. We find that phonon-mediated indirect optical absorption is weak in the visible spectrum and that the phonon-limited hole mobility is very high (around 900 cm$^2$/Vs) at room temperature. This exceptional mobility comes from a combination of low hole effective mass and very weak scattering by polar phonon modes. We rationalize the weak scattering by the less ionic bonding in boron phosphide compared to oxides. We suggest this could be a general advantage of non-oxides for \emph{p}-type transparent conducting applications. Using our computed properties, we assess the transparent conductor figure of merit of boron phosphide and shows that it exceeds by one order of magnitude that of established \emph{p}-type transparent conductors, confirming the potential of this material. △ Less

Submitted 11 April, 2020; originally announced April 2020.

Journal ref: Phys. Rev. Materials 4, 065401 (2020)

Intrinsic Electronic Defect States of Anatase using Density Functional Theory

Authors: Abhishek Raghav, Adie Tri Hanindriyo, Keishu Utimula, Mohaddeseh Abbasnejad, Ryo Maezono, Emila Panda

Abstract: In this work an overall electronic structure including the position and formation energies of various intrinsic defects are computed for anatase using Density Functional Theory aided by Hubbard correction (DFT+U). The intrinsic point defects considered here are, oxygen vacancy ($V_O$), oxygen interstitial ($O_i$), titanium vacancy ($V_{Ti}$) and titanium interstitial ($Ti_i$). Out of all the intri… ▽ More In this work an overall electronic structure including the position and formation energies of various intrinsic defects are computed for anatase using Density Functional Theory aided by Hubbard correction (DFT+U). The intrinsic point defects considered here are, oxygen vacancy ($V_O$), oxygen interstitial ($O_i$), titanium vacancy ($V_{Ti}$) and titanium interstitial ($Ti_i$). Out of all the intrinsic defects considered here, $V_{Ti}$ and $Ti_i$ are found to be most stable under equilibrium condition. Whereas, conduction band in anatase is consisted of mainly Ti 3d with a minor component of O 2p states, valence band is found to be mainly composed of O 2p with a minor contribution from Ti 3d states. $V_O$ and $Ti_i$ are found to form localized states in the band gap. Moreover, anisotropy in the effective mass is seen. Finally, an alignment of band diagrams for all the intrinsic defect states is performed using vacuum potential from slab-supercell calculation as reference. This first principle study would help in the understanding of defect-induced insulating to conducting transition in anatase, which would have significant impact in the photocatalytic and optoelectronic area. △ Less

Submitted 11 March, 2021; v1 submitted 13 February, 2020; originally announced February 2020.

Comments: 31 pages, 10 figures; Shortened article to include only intrinsic defects, improved DOS plots, included result from mBJ calculation in Table 1

Journal ref: Comp. Mat. Sci. 184, 109925(2020)

Synergy of Binary Substitutions for Improving the Cycle Performance in LiNiO2 Revealed by Ab Initio Materials Informatics

Authors: Tomohiro Yoshida, Ryo Maezono, Kenta Hongo

Abstract: We explore LiNiO2-based cathode materials with two-element substitutions by an ab initio simulation based materials informatics (AIMI) approach. According to our previous study, a higher cycle performance strongly correlates with less structural change during charge-discharge cycles; the latter can be used for evaluating the former. However, if we target the full substitution space, full simulatio… ▽ More We explore LiNiO2-based cathode materials with two-element substitutions by an ab initio simulation based materials informatics (AIMI) approach. According to our previous study, a higher cycle performance strongly correlates with less structural change during charge-discharge cycles; the latter can be used for evaluating the former. However, if we target the full substitution space, full simulations are infeasible even for all binary combinations. To circumvent such an exhaustive search, we rely on Bayesian optimization. Actually, by searching only 4% of all the combinations, our AIMI approach discovered two promising combinations, Cr-Mg and Cr-Re, whereas each atom itself never improved the performance. We conclude that the synergy never emerges from a common strategy restricted to combinations of "good" elements that individually improve the performance. In addition, we propose a guideline for the binary substitutions by elucidating the mechanism of crystal structure change. △ Less

Submitted 9 January, 2020; originally announced January 2020.

Comments: 8 pages, 4 figures

Journal ref: ACS Omega 5, 13403-13408 (2020)

Ab initio evaluation of complexation energies for cyclodextrin drug inclusion complexes

Authors: Kenji Oqmhula, Kenta Hongo, Ryo Maezono, Tom Ichibha

Abstract: We examined the reliability of exchange-correlation functionals for molecular encapsulations combined by van der Waals forces, comparing their predictions with those of diffusion Monte Carlo method. We established that functionals with D3 dispersion force correction and including sufficient proportion of exact-exchange in long-ranged interaction can comparatively reliably estimate the binding stre… ▽ More We examined the reliability of exchange-correlation functionals for molecular encapsulations combined by van der Waals forces, comparing their predictions with those of diffusion Monte Carlo method. We established that functionals with D3 dispersion force correction and including sufficient proportion of exact-exchange in long-ranged interaction can comparatively reliably estimate the binding strength. Our finding agrees with a previous ab initio study on argon dimer. However we found that even such functionals may not be able to distinguish the energy differences among different conformations. △ Less

Submitted 6 January, 2020; originally announced January 2020.

Journal ref: ACS Omega 5 (2020) 19371-19376

Quantum annealing approach to Ionic Diffusion in Solid

Authors: Keishu Utimula, Tom Ichibha, Genki I. Prayogo, Kenta Hongo, Kousuke Nakano, Ryo Maezono

Abstract: We have developed a framework for using quantum annealing computation to evaluate a key quantity in ionic diffusion in solids, the correlation factor. Existing methods can only calculate the correlation factor analytically in the case of physically unrealistic models, making it difficult to relate microstructural information about diffusion path networks obtainable by current ${ab\ initio}$ techni… ▽ More We have developed a framework for using quantum annealing computation to evaluate a key quantity in ionic diffusion in solids, the correlation factor. Existing methods can only calculate the correlation factor analytically in the case of physically unrealistic models, making it difficult to relate microstructural information about diffusion path networks obtainable by current ${ab\ initio}$ techniques to macroscopic quantities such as diffusion coefficients. We have mapped the problem into a quantum spin system described by the Ising Hamiltonian. By applying our framework in combination with ab initio technique, it is possible to understand how diffusion coefficients are controlled by temperatures, pressures, atomic substitutions, and other factors.We have calculated the correlation factor in a simple case with a known exact result by a variety of computational methods, including simulated quantum annealing on the spin models, the classical random walk, the matrix description, and quantum annealing on D-Wave with hybrid solver. This comparison shows that all the evaluations give consistent results with each other, but that many of the conventional approaches require infeasible computational costs. Quantum annealing is also currently infeasible because of the cost and scarcity of Q-bits, but we argue that when technological advances alter this situation, quantum annealing will easily outperform all existing methods. △ Less

Submitted 19 July, 2020; v1 submitted 31 December, 2019; originally announced December 2019.

Journal ref: Sci. Rep. 11 (2021) 7261

Electrochemical Properties and Crystal Structure of Li+ / H+ Cation-exchanged LiNiO2

Authors: Takahiro Toma, Ryo Maezono, Kenta Hongo

Abstract: LiNiO2 has high energy density but easily reacts with moisture in the atmosphere and deteriorates. We performed qualitative and quantitative evaluations of the degraded phase of LiNiO2 and the influence of the structural change on the electrochemical properties of the phase. Li1-xHxNiO2 phase with cation exchange between Li+ and H+ was confirmed by thermogravimetric analysis and Karl Fischer titra… ▽ More LiNiO2 has high energy density but easily reacts with moisture in the atmosphere and deteriorates. We performed qualitative and quantitative evaluations of the degraded phase of LiNiO2 and the influence of the structural change on the electrochemical properties of the phase. Li1-xHxNiO2 phase with cation exchange between Li+ and H+ was confirmed by thermogravimetric analysis and Karl Fischer titration measurement. As the H concentration in LiNiO2 increased, the rate capability deteriorated, especially in the low-temperature range and under low state of charge. Experimental and density functional theory (DFT) calculation results suggested that this outcome was due to increased activation energy of Li+ diffusion owing to cation exchange. Rietveld analysis of X-ray diffraction and DFT calculation confirmed that the c lattice parameter and Li-O layer reduced because of the Li+/H+ cation exchange. These results indicate that LiNiO2 modified in the atmosphere has a narrowed Li-O layer, which is the Li diffusion path, and the rate characteristics are degraded. △ Less

Submitted 28 December, 2019; originally announced December 2019.

Comments: 8 pages, 11 figures

Journal ref: ACS Appl. Energy Mater. 4, 4078-4087 (2020)

First Principles Calculations of Superconducting Critical Temperature of ThCr$_2$Si$_2$-Type Structure

Authors: Gewinner Senderanto Sinaga, Keishu Utimula, Kousuke Nakano, Kenta Hongo, Ryo Maezono

Abstract: High critical temperature (T$_c$) superconductor has a great potential in many industrial applications. However, discovering a compound having high T$_c$ is still remaining a big challenge for experimental approach due to time-consuming and high cost. In this paper, we investigated the critical temperature (T$_c$) of several compounds of ThCr$_2$Si$_2$-type structure (space group I4/mmm) since som… ▽ More High critical temperature (T$_c$) superconductor has a great potential in many industrial applications. However, discovering a compound having high T$_c$ is still remaining a big challenge for experimental approach due to time-consuming and high cost. In this paper, we investigated the critical temperature (T$_c$) of several compounds of ThCr$_2$Si$_2$-type structure (space group I4/mmm) since some of them had already been investigated and trusted as the potential candidates for superconductivity. First principle calculation was performed to compute the critical temperature (T$_c$) based on allen-dynes equation modification of McMillian formula. In order to confirm our calculation scheme, we compared our result with compounds which had been experimentally determined obtained from $NIMS$ database. The result showed a very good agreement with experimental data. Based on this scheme, finally, we found ThCu$_2$Si$_2$ and ThAu$_2$Si$_2$ which were most likely to exhibit a superconductivity around 3.88 K and 4.27. $keywords$ : superconductivity, ThCr$_2$Si$_2$-type structure, ThCu$_2$Si$_2$, ThAu$_2$Si$_2$, critical temperature △ Less

Submitted 25 November, 2019; originally announced November 2019.

Stochastic estimations of a total number of classes for the clusterings with too enormous samples to be accommodate into a clustering engine

Authors: Keishu Utimula, Genki I. Prayogo, Kousuke Nakano, Kenta Hongo, Ryo Maezono

Abstract: We considered the problem how to handle the exploding number of possibilities to be sorted into irreducible classes by using a clustering tool when its input capacity cannot accommodate the total number of the possibility. Concrete situations are explained taking examples of atomic substitutions in the supercell modeling of alloys. The number of the possibility sometimes amounts to $\sim$ trillion… ▽ More We considered the problem how to handle the exploding number of possibilities to be sorted into irreducible classes by using a clustering tool when its input capacity cannot accommodate the total number of the possibility. Concrete situations are explained taking examples of atomic substitutions in the supercell modeling of alloys. The number of the possibility sometimes amounts to $\sim$ trillion being too large to be accommodate. It is hence not practically feasible to identify how many irreducible classes exist by straightforward manner even though there are several tools available to perform the clustering. We have developed a stochastic framework to avoid the shortage of capacity, providing a method to estimate the total number of irreducible classes (the order of the classes) as a statistical estimate. A prominent conclusion derived here is that the statistical variation of the number of classes at each sampling trial is working as a promising measure to estimate the order. △ Less

Submitted 21 August, 2020; v1 submitted 18 November, 2019; originally announced November 2019.

Journal ref: Adv. Theory Simul. n/a (2021) 2000301

Ti interstitial flows giving rutile TiO$_2$ reoxidation process enhanced in (001) surface

Authors: Tom Ichibha, Anouar Benali, Kenta Hongo, Ryo Maezono

Abstract: We revisited ab initio evaluations of the energy barriers along the possible diffusion paths of the defects in rutile TiO$_2$. By using a method carefully considering the cancellation of the self-interaction, Ti interstitials hop** along $c$-axis are identified as the major diffusion directing to [001] surface. The conclusion is contradicting to any of previous theoretical works, and the discrep… ▽ More We revisited ab initio evaluations of the energy barriers along the possible diffusion paths of the defects in rutile TiO$_2$. By using a method carefully considering the cancellation of the self-interaction, Ti interstitials hop** along $c$-axis are identified as the major diffusion directing to [001] surface. The conclusion is contradicting to any of previous theoretical works, and the discrepancy is explained by the overestimation of the radius of defects due to the poor cancellations in the previous works. The updated prediction here can explain the superior photocatalysis activity in [001] surface to [110]. △ Less

Submitted 12 September, 2019; originally announced September 2019.

Journal ref: Phys. Rev. Materials 3, 125801 (2019)

Speeding up the ab initio diffusion Monte Carlo by a smart lattice regularization

Authors: Kousuke Nakano, Ryo Maezono, Sandro Sorella

Abstract: One of the most significant drawbacks of the all-electron ab initio diffusion Monte Carlo (DMC) is that its computational cost drastically increases with the atomic number ($Z$), which typically scales with $Z^{\sim 6}$. In this study, we introduce an algorithm based on a very efficient implementation of the Lattice Regularized Diffusion Monte Carlo (LRDMC), where the conventional time discretizat… ▽ More One of the most significant drawbacks of the all-electron ab initio diffusion Monte Carlo (DMC) is that its computational cost drastically increases with the atomic number ($Z$), which typically scales with $Z^{\sim 6}$. In this study, we introduce an algorithm based on a very efficient implementation of the Lattice Regularized Diffusion Monte Carlo (LRDMC), where the conventional time discretization is replaced by its lattice space counterpart. This scheme enables us to conveniently adopt a small lattice space in the vicinity of nuclei, and a large one in the valence region, by which a considerable speedup is achieved, especially for large atomic number $Z$. Indeed, the computational performances of our algorithm can be theoretically established by using the Thomas-Fermi model for heavy atoms, yielding an almost affordable scaling with the atomic number, i.e., $Z^{\sim 5}$. This opens the way for efficient and accurate all-electron ab initio DMC in electronic structure calculations. △ Less

Submitted 4 September, 2019; originally announced September 2019.

Comments: 5 pages, 2 figures, 2 tables + sup. info

Journal ref: Phys. Rev. B 101, 155106 (2020)

Method for the calculation of the Hamaker constants of organic materials by the Lifshitz macroscopic approach with DFT

Authors: Hideyuki Takagishi, Takashi Masuda, Tatsuya Shimoda, Ryo Maezono, Kenta Hongo

Abstract: The Hamaker constants, which are coefficients providing quantitative information on intermolecular forces, were calculated for a number of different materials according to the Lifshitz theory via simple DFT calculations without any experimental measurements being performed. The physical properties (polarizability, dipole moment, molecular volume, and vibrational frequency) of organic molecules wer… ▽ More The Hamaker constants, which are coefficients providing quantitative information on intermolecular forces, were calculated for a number of different materials according to the Lifshitz theory via simple DFT calculations without any experimental measurements being performed. The physical properties (polarizability, dipole moment, molecular volume, and vibrational frequency) of organic molecules were calculated using the B3LYP density functional and the aug-cc-pVDZ basis set. Values for the Hamaker constants were obtained using the approximation of the Lorentz-Lorenz equation and Onsager's equation with these properties. It was found that, in the case of `non-associative' materials, like hydrocarbons, ethers, ketones, aldehydes, carboxylic acids, esters, nitriles, and hydrosilanes, and halides, the calculated Hamaker constants were similar in value to their experimentally determined counterparts. Moreover, with this calculation method, it is easy to create the molecular model and the CPU time can be shortened. △ Less

Submitted 19 June, 2019; originally announced June 2019.

Comments: 8 pages, 7 figures

Journal ref: J. Phys. Chem. A 123, 8726-8733 (2019)

Making the most of data: Quantum Monte Carlo Post-Analysis Revisited

Authors: Tom Ichibha, Kenta Hongo, Ryo Maezono, Alex J. W. Thom

Abstract: In quantum Monte Carlo (QMC) methods, energy estimators are calculated as the statistical average of the Markov chain sampling of energy estimator along with an associated statistical error. This error estimation is not straightforward and there are several choices of the error estimation methods. We evaluate the performance of three methods, Straatsma, an autoregressive model, and a blocking anal… ▽ More In quantum Monte Carlo (QMC) methods, energy estimators are calculated as the statistical average of the Markov chain sampling of energy estimator along with an associated statistical error. This error estimation is not straightforward and there are several choices of the error estimation methods. We evaluate the performance of three methods, Straatsma, an autoregressive model, and a blocking analysis based on von Neumann's ratio test for randomness, for the energy time-series given by Diffusion Monte Carlo, Full Configuration Interaction Quantum Monte Carlo and Coupled Cluster Monte Carlo methods. From these analyses we describe a hybrid analysis method which provides reliable error estimates for series of all lengths. Equally important is the estimation of the appropriate start point of the equilibrated phase, and two heuristic schemes are tested, establishing that MSER (mean squared error rule) gives reasonable and constant estimations independent of the length of time-series. △ Less

Submitted 22 April, 2019; originally announced April 2019.

Importance of vdW and long-range exchange interactions to DFT-predicted docking energies between plumbagin and cyclodextrins

Authors: Tom Ichibha, Ornin Srihakulung, Guo Chao, Adie Tri Hanindriyo, Luckhana Lawtrakul, Kenta Hongo, Ryo Maezono

Abstract: We calculated the docking energies between plumbagin and cyclodextrins, using density functional theory (DFT) with several functionals and some semi-empirical methods. Our DFT results revealed that GD3 dispersion force correction significantly improves the reliability of prediction. Also sufficient amount of long-range exchange is important to make it reliable further, agreeing with the previous w… ▽ More We calculated the docking energies between plumbagin and cyclodextrins, using density functional theory (DFT) with several functionals and some semi-empirical methods. Our DFT results revealed that GD3 dispersion force correction significantly improves the reliability of prediction. Also sufficient amount of long-range exchange is important to make it reliable further, agreeing with the previous work on argon dimer. In the semi-empirical methods, PM6 and PM7 qualitatively reproduce the stabilization by docking , yet under- and over-estimating the docking energies by ~10 kcal/mol, respectively. △ Less

Submitted 4 April, 2019; originally announced April 2019.

All-electron quantum Monte Carlo with Jastrow single determinant Ansatz: application to the sodium dimer

Authors: Kousuke Nakano, Ryo Maezono, Sandro Sorella

Abstract: In this work, we report potential energy surfaces (PESs) of the sodium dimer calculated by variational (VMC) and lattice regularized diffusion Monte Carlo (LRDMC). The VMC calculation is accurate for determining the equilibrium distance and the qualitative shape of the experimental PES. Remarkably, after the application of the LRDMC projection to this single determinant ansatz, namely the Jastrow… ▽ More In this work, we report potential energy surfaces (PESs) of the sodium dimer calculated by variational (VMC) and lattice regularized diffusion Monte Carlo (LRDMC). The VMC calculation is accurate for determining the equilibrium distance and the qualitative shape of the experimental PES. Remarkably, after the application of the LRDMC projection to this single determinant ansatz, namely the Jastrow Antisymmetrized Geminal Product (JAGP), chemical accuracy (~ 1kcal/mol) is reached, and the obtained dissociation energy, equilibrium internuclear distance, and harmonic vibrational frequency are in very good agreement with the experimental ones. This outcome crucially depends on the quality of the optimization used to determine the best possible trial function within the chosen ansatz. The strategy adopted in this work is to minimize the variational energy by initializing the trial function with the DFT single determinant ansatz expanded exactly in the same atomic basis used for the corresponding VMC and LRDMC calculations. This atomic basis is ad-hoc reshaped for QMC calculations. Indeed, we multiply the standard Gaussian type atomic orbitals by a one-body Jastrow factor, satisfying in this way the electron-ion cusp conditions. This allows us to use a very small basis almost converged in the complete basis set limit, by reducing the computational effort as well as the statistical fluctuations on the total energy. In order to achieve these important advantages, we have defined a very efficient DFT algorithm in the mentioned basis, by estimating the corresponding matrix elements on a mesh, and by using a much finer mesh grid in the vicinity of nuclei. △ Less

Submitted 26 March, 2019; originally announced March 2019.

Comments: 15 pages, 5 figures, 5 tables

Journal ref: J. Chem. Theory Comput. 15 4044-4055 (2019)

First-principles anharmonic vibrational study of the structure of calcium silicate perovskite under lower mantle conditions

Authors: Joseph C. A. Prentice, Ryo Maezono, R. J. Needs

Abstract: Calcium silicate perovskite (CaSiO$_3$) is one of the major mineral components of the lower mantle, but has been the subject of relatively little work compared to the more abundant Mg-based materials. One of the major problems related to CaSiO$_3$ that is still the subject of research is its crystal structure under lower mantle conditions - a cubic Pm$\bar{3}$m structure is accepted in general, bu… ▽ More Calcium silicate perovskite (CaSiO$_3$) is one of the major mineral components of the lower mantle, but has been the subject of relatively little work compared to the more abundant Mg-based materials. One of the major problems related to CaSiO$_3$ that is still the subject of research is its crystal structure under lower mantle conditions - a cubic Pm$\bar{3}$m structure is accepted in general, but some have suggested that lower-symmetry structures may be relevant. In this paper, we use a fully first-principles vibrational self-consistent field method to perform high accuracy anharmonic vibrational calculations on several candidate structures at a variety of points along the geotherm near the base of the lower mantle to investigate the stability of the cubic structure and related distorted structures. Our results show that the cubic structure is the most stable throughout the lower mantle, and that this result is robust against the effects of thermal expansion. △ Less

Submitted 11 February, 2019; originally announced February 2019.

Journal ref: Physical Review B 99, 064101 (2019)

First-Principles Study of Structural Transition in LiNiO2 and High Throughput Screening for Long Life Battery

Authors: Tomohiro Yoshida, Kenta Hongo, Ryo Maezono

Abstract: Herein, we performed ab initio screening to identify the best do** of LiNiO2 to achieve improved cycle performance in lithium ion batteries. The interlayer interaction that dominates the c-axis contraction and overall performance was captured well by density functional theory using van der Waals exchange-correlation functionals. The screening indicated that Nb-do** is promising for improving c… ▽ More Herein, we performed ab initio screening to identify the best do** of LiNiO2 to achieve improved cycle performance in lithium ion batteries. The interlayer interaction that dominates the c-axis contraction and overall performance was captured well by density functional theory using van der Waals exchange-correlation functionals. The screening indicated that Nb-do** is promising for improving cycle performance. To extract qualitative reasonings, we performed data analysis in a materials informatics manner to obtain a reasonable regression to reproduce the obtained results. LASSO analysis implied that the charge density between the layers in the discharged state is the dominant factor influencing cycle performance. △ Less

Submitted 2 April, 2019; v1 submitted 8 January, 2019; originally announced January 2019.

Comments: 7 pages, 4 figures

Journal ref: J. Phys. Chem. C 123, 14126-14131 (2019)

$\boldsymbol{Ab\ initio}$ search of polymer crystals with high thermal conductivity

Authors: Keishu Utimula, Tom Ichibha, Ryo Maezono, Kenta Hongo

Abstract: Lattice thermal conductivities (LTC) for a subset of polymer crystals from the Polymer Genome Library were investigated to explore high LTC polymer systems. We employed a first-principles approach to evaluating phonon lifetimes within the third-order perturbation theory combined with density functional theory, and then solved the linearized Boltzmann transport equation with single-mode relaxation… ▽ More Lattice thermal conductivities (LTC) for a subset of polymer crystals from the Polymer Genome Library were investigated to explore high LTC polymer systems. We employed a first-principles approach to evaluating phonon lifetimes within the third-order perturbation theory combined with density functional theory, and then solved the linearized Boltzmann transport equation with single-mode relaxation time approximated by the computed lifetime. Typical high LTC polymer systems, polyethylene (PE) crystal and fiber, were benchmarked, which is reasonably consistent with previous references, validating our approach. We then applied it to not only typical polymer crystals, but also some selected ones having structural similarities to PE. Among the latter crystals, we discovered that beta phase of Poly(vinylidenesurely fluoride) (PVF-$β$) crystal has higher LTC than PE at low temperature. Our detailed mode analysis revealed that the phonon lifetime of PVF-$β$ is more locally distributed around lower frequency modes and four-times larger than that of PE. It was also found from a simple data analysis that the LTC relatively correlates with curvature of energy-volume plot. The curvature would be used as a descriptor for further exploration of high LTC polymer crystals by means of a data-driven approach beyond human-based one. △ Less

Submitted 16 November, 2018; originally announced November 2018.

Journal ref: Chem. Mater. 13, 4649-4656 (2019)

${\it Ab\ initio}$ thermodynamic properties of certain compounds in Nd-Fe-B system

Authors: Adie Tri Hanindriyo, Soumya Sridar, K. C. Hari Kumar, Kenta Hongo, Ryo Maezono

Abstract: In this work, we report the results of \emph{ab initio} calculations of thermochemical properties of several compounds in the Fe-Nd, B-Nd and B-Fe-Nd systems. We have performed DFT+U calculations to compute the enthalpy of formation of the compounds NdB$_6$, NdB$_4$, Nd$_2$B$_5$, Nd$_2$Fe$_{17}$ and Nd$_5$Fe$_2$B$_6$. It was found that the values obtained with an effective Hubbard $U$ correction h… ▽ More In this work, we report the results of \emph{ab initio} calculations of thermochemical properties of several compounds in the Fe-Nd, B-Nd and B-Fe-Nd systems. We have performed DFT+U calculations to compute the enthalpy of formation of the compounds NdB$_6$, NdB$_4$, Nd$_2$B$_5$, Nd$_2$Fe$_{17}$ and Nd$_5$Fe$_2$B$_6$. It was found that the values obtained with an effective Hubbard $U$ correction have better agreement with the experimental data. We have also computed the vibrational contribution to the heat capacity ($C_p$) of the compounds as a function of temperature was computed using the quasharmonic approximation. For most of the compounds these properties have not been experimentally determined until now. Hence, the computed \emph{ab initio} thermodynamic properties will serve as useful input for the Gibbs energy model parameter assessment using the CALPHAD method. △ Less

Submitted 20 August, 2020; v1 submitted 16 November, 2018; originally announced November 2018.

Journal ref: Comp. Mater. Sci. 180, 109696 (2020/IF=2.644)

Machine learning clustering technique applied to powder X-ray diffraction patterns to distinguish alloy substitutions

Authors: Keishu Utimula, Rutchapon Hunkao, Masao Yano, Hiroyuki Kimoto, Kenta Hongo, Shogo Kawaguchi, Su** Suwanna, Ryo Maezono

Abstract: We applied the clustering technique using DTW (dynamic time wrap**) analysis to XRD (X-ray diffraction) spectrum patterns in order to identify the microscopic structures of substituents introduced in the main phase of magnetic alloys. The clustering is found to perform well to identify the concentrations of the substituents with successful rates (around 90%). The sufficient performance is attrib… ▽ More We applied the clustering technique using DTW (dynamic time wrap**) analysis to XRD (X-ray diffraction) spectrum patterns in order to identify the microscopic structures of substituents introduced in the main phase of magnetic alloys. The clustering is found to perform well to identify the concentrations of the substituents with successful rates (around 90%). The sufficient performance is attributed to the nature of DTW processing to filter out irrelevant informations such as the peak intensities (due to the incontrollability of diffraction conditions in polycrystalline samples) and the uniform shift of peak positions (due to the thermal expansions of lattices). △ Less

Submitted 27 March, 2019; v1 submitted 2 October, 2018; originally announced October 2018.

Journal ref: Adv. Theory Simul. 3, 2000039:1-9 (2020)

Inconsistencies in ab initio evaluations of non-additive contributions of DNA stacking energies

Authors: Ken Sinkou Qin, Tom Ichibha, Kenta Hongo, Ryo Maezono

Abstract: We evaluated the non-additive contributions of the inter-molecular interactions in B-DNA stacking by using diffusion Monte Carlo methods with fixed node approximations (FNDMC). For some base-pair steps, we found that their non-additive contributions evaluated by FNDMC significantly differ from those by any other {\it ab initio} methods, while there are no remarkable findings on their stacking ener… ▽ More We evaluated the non-additive contributions of the inter-molecular interactions in B-DNA stacking by using diffusion Monte Carlo methods with fixed node approximations (FNDMC). For some base-pair steps, we found that their non-additive contributions evaluated by FNDMC significantly differ from those by any other {\it ab initio} methods, while there are no remarkable findings on their stacking energies themselves. The apparently unexpected results of non-additivity raise issues in both FNDMC and correlated wavefunction methods. For the latter, it can be partly attributed to the imperfect complete basis set (CBS) correction scheme due to the limitation of the computational costs. On the other hand, the striking contrast between the stacking and non-additivity behaviors was found in FNDMC. This might imply that the error cancellations of the fixed node biases in FNDMC work well for the stacking energies, while not for the non-additivity contributions involving charge transfers caused by hydrogen bonds bridging Watson-Crick base pairs. △ Less

Submitted 3 October, 2019; v1 submitted 11 July, 2018; originally announced July 2018.

Comments: 21 pages, 17 figures

Journal ref: Chem. Phys. 529 (2020) 110554

Quantum Monte Carlo calculations of energy gaps from first principles

Authors: Ryan J. Hunt, Marcin Szyniszewski, Genki I. Prayogo, Ryo Maezono, Neil D. Drummond

Abstract: We review the use of continuum quantum Monte Carlo (QMC) methods for the calculation of energy gaps from first principles, and present a broad set of excited-state calculations carried out with the variational and fixed-node diffusion QMC methods on atoms, molecules, and solids. We propose a finite-size-error correction scheme for bulk energy gaps calculated in finite cells subject to periodic bou… ▽ More We review the use of continuum quantum Monte Carlo (QMC) methods for the calculation of energy gaps from first principles, and present a broad set of excited-state calculations carried out with the variational and fixed-node diffusion QMC methods on atoms, molecules, and solids. We propose a finite-size-error correction scheme for bulk energy gaps calculated in finite cells subject to periodic boundary conditions. We show that finite-size effects are qualitatively different in two-dimensional materials, demonstrating the effect in a QMC calculation of the band gap and exciton binding energy of monolayer phosphorene. We investigate the fixed-node errors in diffusion Monte Carlo gaps evaluated with Slater-Jastrow trial wave functions by examining the effects of backflow transformations, and also by considering the formation of restricted multideterminant expansions for excited-state wave functions. For several molecules, we examine the importance of structural relaxation in the excited state in determining excited-state energies. We study the feasibility of using variational Monte Carlo with backflow correlations to obtain accurate excited-state energies at reduced computational cost, finding that this approach can be valid. We find that diffusion Monte Carlo gap calculations can be performed with much larger time steps than are typically required to converge the total energy, at significantly diminished computational expense, but that in order to alleviate fixed-node errors in calculations on solids the inclusion of backflow correlations is sometimes necessary. △ Less

Submitted 6 August, 2018; v1 submitted 12 June, 2018; originally announced June 2018.

Comments: 24 pages, including 11 figures

Journal ref: Phys. Rev. B 98, 075122 (2018)

Stabilization mechanism of tetragonal structure in hydrothermal synthesized BaTiO$_3$ nanocrystal

Authors: Kenta Hongo, Sinji Kurata, Apichai Jomphoak, Miki Inada, Katsuro Hayashi, Ryo Maezono

Abstract: Higher OH concentration is identified in tetragonal barium titanate (BaTiO$_3$) nanorods synthesized by a hydrothermal method with 10 vol% ethylene glycol solvent [Inada, M. $et$ $al$. $Ceram.$ $Int.$ $2015$, $41$, 5581-5587]. This is apparently inconsistent with the known fact that higher OH concentration in the conventional hydrothermal synthesis makes pseudo-cubic BaTiO$_3$ nanocrystals more st… ▽ More Higher OH concentration is identified in tetragonal barium titanate (BaTiO$_3$) nanorods synthesized by a hydrothermal method with 10 vol% ethylene glycol solvent [Inada, M. $et$ $al$. $Ceram.$ $Int.$ $2015$, $41$, 5581-5587]. This is apparently inconsistent with the known fact that higher OH concentration in the conventional hydrothermal synthesis makes pseudo-cubic BaTiO$_3$ nanocrystals more stable than the tetragonal one. To understand where and how the introduced OH anions are located and behave in the nanocrystals, we applied $ab$ $initio$ analysis to several possible microscopic geometries of OH locations, confirming the relative stability of the tetragonal distortion over the pseudo-cubic one due to the preference of trans-type configurations of OH anions. We also performed FTIR and XRD analysis, all being in consistent with the microscopic picture established by the $ab$ $initio$ geometrical optimizations. △ Less

Submitted 9 April, 2018; originally announced April 2018.

Journal ref: Inorg. Chem. 2018, 57, 5413-5419

A new ab initio modeling scheme for ion self-diffusion coefficient applied for ε-Cu3Sn phase of Cu-Sn alloy

Authors: Tom Ichibha, Genki Prayogo, Kenta Hongo, Ryo Maezono

Abstract: We present a new modeling scheme for ion self-diffusion coefficient, which broadens the applicable scope of ab initio approach. The essential concepts of the scheme are `domain division' and `coarse graining' of the diffusion network based on the barrier energies predicted by the ab initio calculation. The scheme was applied to evaluate Cu ion self-diffusion coefficient in ε-Cu3Sn phase of Cu-Sn a… ▽ More We present a new modeling scheme for ion self-diffusion coefficient, which broadens the applicable scope of ab initio approach. The essential concepts of the scheme are `domain division' and `coarse graining' of the diffusion network based on the barrier energies predicted by the ab initio calculation. The scheme was applied to evaluate Cu ion self-diffusion coefficient in ε-Cu3Sn phase of Cu-Sn alloy, which is a typical system having long-range periodicity. The model constructed with the scheme successfully reproduces the experimental values in a wide temperature range. △ Less

Submitted 21 August, 2020; v1 submitted 7 April, 2018; originally announced April 2018.

Journal ref: Phys. Chem. Chem. Phys. 21, 5158-5164 (2019)

Adhesion of the electrodes on diamond device surfaces

Authors: Tom Ichibha, Kenta Hongo, Isaac Motochi, Nicholas W. Makau, George O. Amolo, Ryo Maezono

Abstract: Appropriate candidates of the metallic sheet used for the electrodes of diamond semiconductor are investigated using computational approaches based on density functional theory (DFT). For twenty kinds of metallic elements $x$, we modeled a diamond-metal interface and evaluated its work of separation, $W_\mathrm{sep}(x)$, as a possible measure of anti-peeling strength. The appropriateness of the Oh… ▽ More Appropriate candidates of the metallic sheet used for the electrodes of diamond semiconductor are investigated using computational approaches based on density functional theory (DFT). For twenty kinds of metallic elements $x$, we modeled a diamond-metal interface and evaluated its work of separation, $W_\mathrm{sep}(x)$, as a possible measure of anti-peeling strength. The appropriateness of the Ohmic contact was inferred from DOS (density of states) analysis of diamond-metal interface by looking at whether an in-gap (isolated/localized) peak disappears as well as a sufficient amount of DOS value exists around the Fermi level. Our DFT simulation confirmed that a typical electrode, Au, is not adhesive enough for power devices [$W_\mathrm{sep}(\mathrm{Au}) = 0.80$ J/m$^2$], though showing the Ohmic contact. In contrast, some transition metals were found to possess Ohmic features with much stronger adhesion than Au [e.g., $W_\mathrm{sep}(\mathrm{Cr}/\mathrm{Ti}) = 6.02/4.03$ J/m$^2$]. △ Less

Submitted 10 September, 2017; originally announced September 2017.

Diffusion quantum Monte Carlo study of excitonic complexes in two-dimensional transition-metal dichalcogenides

Authors: E. Mostaani, M. Szyniszewski, C. H. Price, R. Maezono, M. Danovich, R. J. Hunt, N. D. Drummond, V. I. Fal'ko

Abstract: Excitonic effects play a particularly important role in the optoelectronic behavior of two-dimensional semiconductors. To facilitate the interpretation of experimental photoabsorption and photoluminescence spectra we provide (i) statistically exact diffusion quantum Monte Carlo binding-energy data for a Mott-Wannier model of (donor/acceptor-bound) excitons, trions, and biexcitons in two-dimensiona… ▽ More Excitonic effects play a particularly important role in the optoelectronic behavior of two-dimensional semiconductors. To facilitate the interpretation of experimental photoabsorption and photoluminescence spectra we provide (i) statistically exact diffusion quantum Monte Carlo binding-energy data for a Mott-Wannier model of (donor/acceptor-bound) excitons, trions, and biexcitons in two-dimensional semiconductors in which charges interact via the Keldysh potential, (ii) contact pair-distribution functions to allow a perturbative description of contact interactions between charge carriers, and (iii) an analysis and classification of the different types of bright trion and biexciton that can be seen in single-layer molybdenum and tungsten dichalcogenides. We investigate the stability of biexcitons in which two charge carriers are indistinguishable, finding that they are only bound when the indistinguishable particles are several times heavier than the distinguishable ones. Donor/acceptor-bound biexcitons have similar binding energies to the experimentally measured biexciton binding energies. We predict the relative positions of all stable free and bound excitonic complexes of distinguishable charge carriers in the photoluminescence spectra of WSe$_2$ and MoSe$_2$. △ Less

Submitted 28 July, 2017; v1 submitted 14 June, 2017; originally announced June 2017.

Journal ref: Phys. Rev. B 96, 075431 (2017)

Exotic phase transition and superconductivity in layered titanium-oxypnictides implied by a computational phonon analysis

Authors: Kousuke Nakano, Kenta Hongo, Ryo Maezono

Abstract: We applied $ab$ $initio$ phonon analysis to layered titanium-oxypnictides, Na$_2$Ti$_2Pn_2$O ($Pn$ = As, Sb), and found a clear contrast between the cases with lighter/heavier pnictogen in comparisons with experiments. The result completely explains the experimental structure, $C$2/$m$ for $Pn$ = As, within the conventional electron-phonon framework, while there arise discrepancies when the pnicto… ▽ More We applied $ab$ $initio$ phonon analysis to layered titanium-oxypnictides, Na$_2$Ti$_2Pn_2$O ($Pn$ = As, Sb), and found a clear contrast between the cases with lighter/heavier pnictogen in comparisons with experiments. The result completely explains the experimental structure, $C$2/$m$ for $Pn$ = As, within the conventional electron-phonon framework, while there arise discrepancies when the pnictogen gets heavier, being in the same trend for the BaTi$_2Pn_2$O ($Pn$ = As, Sb, Bi) case. The fact implies a systematic dependence on pnictogen to tune the mechanism of the phase transition and superconductivity from conventional to exotic. △ Less

Submitted 2 February, 2017; originally announced February 2017.

Journal ref: Inorg. Chem. 2017, 56, 22, 13732-13740

Quantum Monte Carlo study of the energetics of the rutile, anatase, brookite, and columbite TiO$_2$ polymorphs

Authors: John Trail, Bartomeu Monserrat, Pablo López Ríos, Ryo Maezono, Richard J. Needs

Abstract: The relative energies of the low-pressure rutile, anatase, and brookite polymorphs and the high-pressure columbite polymorph of TiO$_2$ have been calculated as a function of temperature using the diffusion quantum Monte Carlo (DMC) method and density functional theory (DFT). The vibrational energies are found to be important on the scale of interest and significant quartic anharmonicity is found i… ▽ More The relative energies of the low-pressure rutile, anatase, and brookite polymorphs and the high-pressure columbite polymorph of TiO$_2$ have been calculated as a function of temperature using the diffusion quantum Monte Carlo (DMC) method and density functional theory (DFT). The vibrational energies are found to be important on the scale of interest and significant quartic anharmonicity is found in the rutile phase. Static-lattice DFT calculations predict that anatase is lower in energy than rutile, in disagreement with experiment. The accurate description of electronic correlations afforded by DMC calculations and the inclusion of anharmonic vibrational effects contribute to stabilizing rutile with respect to anatase. Our calculations predict a phase transition from anatase to rutile TiO$_2$ at $630 \pm 210$ K. △ Less

Submitted 27 October, 2016; originally announced October 2016.

Journal ref: Phys. Rev. B 95, 121108 (2017)