Showing 1–20 of 20 results for author: Maestre, A

Focus topics for the ECFA study on Higgs / Top / EW factories

Authors: Jorge de Blas, Patrick Koppenburg, Jenny List, Fabio Maltoni, Juan Alcaraz Maestre, Juliette Alimena, John Alison, Patrizia Azzi, Paolo Azzurri, Emanuele Bagnaschi, Timothy Barklow, Matthew J. Basso, Josh Bendavid, Martin Beneke, Eli Ben-Haim, Mikael Berggren, Marzia Bordone, Ivanka Bozovic, Valentina Cairo, Nuno Filipe Castro, Marina Cobal, Paula Collins, Mogens Dam, Valerio Dao, Matteo Defranchis , et al. (83 additional authors not shown)

Abstract: In order to stimulate new engagement and trigger some concrete studies in areas where further work would be beneficial towards fully understanding the physics potential of an $e^+e^-$ Higgs / Top / Electroweak factory, we propose to define a set of focus topics. The general reasoning and the proposed topics are described in this document. In order to stimulate new engagement and trigger some concrete studies in areas where further work would be beneficial towards fully understanding the physics potential of an $e^+e^-$ Higgs / Top / Electroweak factory, we propose to define a set of focus topics. The general reasoning and the proposed topics are described in this document. △ Less

Submitted 18 January, 2024; v1 submitted 15 January, 2024; originally announced January 2024.

Comments: v3: fixed spelling of two authors

Wafer-scale graphene field-effect transistor biosensor arrays with monolithic CMOS readout

Authors: Miika Soikkeli, Anton Murros, Arto Rantala, Oihana Txoperena, Olli-Pekka Kilpi, Markku Kainlauri, Kuura Sovanto, Arantxa Maestre, Alba Centeno, Kari Tukkiniemi, David Gomes Martins, Amaia Zurutuza, Sanna Arpiainen, Mika Prunnila

Abstract: The reliability of analysis is becoming increasingly important as point-of-care diagnostics are transitioning from single analyte detection towards multiplexed multianalyte detection. Multianalyte detection benefits greatly from complementary metal-oxide semiconductor (CMOS) integrated sensing solutions, offering miniaturized multiplexed sensing arrays with integrated readout electronics and extre… ▽ More The reliability of analysis is becoming increasingly important as point-of-care diagnostics are transitioning from single analyte detection towards multiplexed multianalyte detection. Multianalyte detection benefits greatly from complementary metal-oxide semiconductor (CMOS) integrated sensing solutions, offering miniaturized multiplexed sensing arrays with integrated readout electronics and extremely large sensor counts. The development of CMOS back end of line integration compatible graphene field-effect transistor (GFET) based biosensing has been rapid during the last few years, both in terms of the fabrication scale-up and functionalization towards biorecognition from real sample matrices. The next steps in industrialization relate to improving reliability and require increased statistics. Regarding functionalization towards truly quantitative sensors and on-chip bioassays with improved statistics require sensor arrays with reduced variability in functionalization. Such multiplexed bioassays, whether based on graphene or on other sensitive nanomaterials, are among the most promising technologies for label-free electrical biosensing. As an important step towards that, we report wafer-scale fabrication of CMOS integrated GFET arrays with high yield and uniformity, designed especially for biosensing applications. We demonstrate the operation of the sensing platform array with 512 GFETs in simultaneous detection for sodium chloride concentration series. This platform offers a truly statistical approach on GFET based biosensing and further to quantitative and multi-analyte sensing. The reported techniques can also be applied to other fields relying on functionalized GFETs, such as gas or chemical sensing or infrared imaging. △ Less

Submitted 15 May, 2023; originally announced May 2023.

Wafer-scale Graphene Electro-absorption Modulators Fabricated in a 300mm CMOS Platform

Authors: Chenghan Wu, Steven Brems, Didit Yudistira, Daire Cott, Alexey Milenin, Kevin Vandersmissen, Arantxa Maestre, Alba Centeno, Amaia Zurutuza, Joris Van Campenhout, Cedric Huyghebaert, Dries Van Thourhout, Marianna Pantouvaki

Abstract: Graphene-based devices have shown great promise for several applications. For graphene devices to be used in real-world systems, it is necessary to demonstrate competitive device performance, repeatability of results, reliability, and a path to large-scale manufacturing with high yield at low cost. Here, we select single-layer graphene electro-absorption modulators as test vehicle and establish th… ▽ More Graphene-based devices have shown great promise for several applications. For graphene devices to be used in real-world systems, it is necessary to demonstrate competitive device performance, repeatability of results, reliability, and a path to large-scale manufacturing with high yield at low cost. Here, we select single-layer graphene electro-absorption modulators as test vehicle and establish their wafer-scale integration in a 300mm pilot CMOS foundry environment. A hardmask is used to shape graphene, while tungsten-based contacts are fabricated using the damascene approach to enable CMOS-compatible fabrication. By analyzing data from hundreds of devices per wafer, the impact of specific processing steps on the performance could be identified and optimized. After optimization, modulation depth of 50 $\pm$ 4 dB/mm is demonstrated on 400 devices measured using 6 V peak-to-peak voltage. The electro-optical bandwidth is up to 15.1 $\pm$ 1 1.8 GHz for 25$μ$m-long devices. The results achieved are comparable to lab-based record-setting graphene devices of similar design and CVD graphene quality. By demonstrating the reproducibility of the results across hundreds of devices, this work resolves the bottleneck of graphene wafer-scale integration. Furthermore, CMOS-compatible processing enables co-integration of graphene-based devices with other photonics and electronics building blocks on the same chip, and for high-volume low-cost manufacturing. △ Less

Submitted 28 March, 2023; originally announced April 2023.

Graphene-Quantum Dot Hybrid Photodetectors from 200 mm Wafer Scale Processing

Authors: Sha Li, Zhenxing Wang, Bianca Robertz, Daniel Neumaier, Oihana Txoperena, Arantxa Maestre, Amaia Zurutuza, Chris Bower, Ashley Rushton, Yinglin Liu, Chris Harris, Alexander Bessonov, Surama Malik, Mark Allen, Ivonne Medina-Salazar, Tapani Ryhänen, Max C. Lemme

Abstract: A 200 mm processing platform for the large-scale production of graphene field-effect transistor-quantum dot (GFET-QD) hybrid photodetectors is demonstrated. Comprehensive statistical analysis of electric data shows a high yield (96%) and low variation of the 200 mm scale fabrication. The GFET-QD devices deliver responsivities of 10${^5}$ - 10${^6}$ V/W in a wavelength range from 400 to 1800 nm, at… ▽ More A 200 mm processing platform for the large-scale production of graphene field-effect transistor-quantum dot (GFET-QD) hybrid photodetectors is demonstrated. Comprehensive statistical analysis of electric data shows a high yield (96%) and low variation of the 200 mm scale fabrication. The GFET-QD devices deliver responsivities of 10${^5}$ - 10${^6}$ V/W in a wavelength range from 400 to 1800 nm, at up to 100 frames per second. Spectral sensitivity compares well to that obtained using similar GFET-QD photodetectors. The device concept enables gate-tunable suppression or enhancement of the photovoltage, which may be exploited for electric shutter operation by toggling between the signal capture and shutter states. The devices show good stability at a wide operation range and external quantum efficiency of 20% in the short-wavelength infrared range. Furthermore, an integration solution with complementary metal-oxide-semiconductor technology is presented to realize image-sensor-array chips and a proof-of-concept image system. This work demonstrates the potential for the volume manufacture of infrared photodetectors for a wide range of imaging applications. △ Less

Submitted 1 March, 2023; originally announced March 2023.

Comments: 29 pages

The Analytical Method algorithm for trigger primitives generation at the LHC Drift Tubes detector

Authors: G. Abbiendi, J. Alcaraz Maestre, A. Álvarez Fernández, B. Álvarez González, N. Amapane, I. Bachiller, L. Barcellan, C. Baldanza, C. Battilana, M. Bellato, G. Bencze, M. Benettoni, N. Beni, A. Benvenuti, A. Bergnoli, L. C. Blanco Ramos, L. Borgonovi, A. Bragagnolo, V. Cafaro, A. Calderon, E. Calvo, R. Carlin, C. A. Carrillo Montoya, F. R. Cavallo, J. M. Cela Ruiz , et al. (121 additional authors not shown)

Abstract: The Compact Muon Solenoid (CMS) experiment prepares its Phase-2 upgrade for the high-luminosity era of the LHC operation (HL-LHC). Due to the increase of occupancy, trigger latency and rates, the full electronics of the CMS Drift Tube (DT) chambers will need to be replaced. In the new design, the time bin for the digitisation of the chamber signals will be of around 1~ns, and the totality of the s… ▽ More The Compact Muon Solenoid (CMS) experiment prepares its Phase-2 upgrade for the high-luminosity era of the LHC operation (HL-LHC). Due to the increase of occupancy, trigger latency and rates, the full electronics of the CMS Drift Tube (DT) chambers will need to be replaced. In the new design, the time bin for the digitisation of the chamber signals will be of around 1~ns, and the totality of the signals will be forwarded asynchronously to the service cavern at full resolution. The new backend system will be in charge of building the trigger primitives of each chamber. These trigger primitives contain the information at chamber level about the muon candidates position, direction, and collision time, and are used as input in the L1 CMS trigger. The added functionalities will improve the robustness of the system against ageing. An algorithm based on analytical solutions for reconstructing the DT trigger primitives, called Analytical Method, has been implemented both as a software C++ emulator and in firmware. Its performance has been estimated using the software emulator with simulated and real data samples, and through hardware implementation tests. Measured efficiencies are 96 to 98\% for all qualities and time and spatial resolutions are close to the ultimate performance of the DT chambers. A prototype chain of the HL-LHC electronics using the Analytical Method for trigger primitive generation has been installed during Long Shutdown 2 of the LHC and operated in CMS cosmic data taking campaigns in 2020 and 2021. Results from this validation step, the so-called Slice Test, are presented. △ Less

Submitted 3 February, 2023; originally announced February 2023.

Comments: 16 pages, 11 figures

Precision studies of quantum electrodynamics at future $e^+e^-$ colliders

Authors: J. Alcaraz Maestre

Abstract: We classify the possible deviations from the Standard Model in the QED-dominated $\mathrm{e^+e^-}\rightarrowγγ$ process under the assumption of a preserved $SU(2)_L \times U(1)_Y$ symmetry. We find that the only deviations really observable in practice correspond to a correction of the differential cross section by a factor $(1 + \frac{c_8~s^2}{8παΛ^4}~\sin^2θ)$, where $Λ$ is the scale of new phys… ▽ More We classify the possible deviations from the Standard Model in the QED-dominated $\mathrm{e^+e^-}\rightarrowγγ$ process under the assumption of a preserved $SU(2)_L \times U(1)_Y$ symmetry. We find that the only deviations really observable in practice correspond to a correction of the differential cross section by a factor $(1 + \frac{c_8~s^2}{8παΛ^4}~\sin^2θ)$, where $Λ$ is the scale of new physics, $θ$ is the polar angle of any of the final state photons and $c_8$ is a constant of order 1. We also provide sensitivity estimates for QED deviations at future $\mathrm{e^+e^-}$ facilities. An $\mathrm{e^+e^-}$ collider operating at $\sqrt{s}=3$ TeV could provide sensitivity to $Λ$ scales as large as 15 TeV, provided that acceptances and efficiencies are controlled at the per mille level. Finally, we also discuss the possibility of a measurement of the luminosity at the FCC-ee with $\lesssim 10^{-4}$ precision, using analyses of the $\mathrm{e^+e^-}\rightarrowγγ$ process at $\sqrt{s}\approx m_\mathrm{Z}$ energies. △ Less

Submitted 15 June, 2022; originally announced June 2022.

Comments: 11 pages

Report number: CIEMAT Technical Report 1499

The Future Circular Collider: a Summary for the US 2021 Snowmass Process

Authors: G. Bernardi, E. Brost, D. Denisov, G. Landsberg, M. Aleksa, D. d'Enterria, P. Janot, M. L. Mangano, M. Selvaggi, F. Zimmermann, J. Alcaraz Maestre, C. Grojean, R. M. Harris, A. Pich, M. Vos, S. Heinemeyer, P. Giacomelli, P. Azzi, F. Bedeschi, M. Klute, A. Blondel, C. Paus, F. Simon, M. Dam, E. Barberis , et al. (19 additional authors not shown)

Abstract: In this white paper for the 2021 Snowmass process, we give a description of the proposed Future Circular Collider (FCC) project and its physics program. The paper summarizes and updates the discussion submitted to the European Strategy on Particle Physics. After construction of an approximately 90 km tunnel, an electron-positron collider based on established technologies allows world-record instan… ▽ More In this white paper for the 2021 Snowmass process, we give a description of the proposed Future Circular Collider (FCC) project and its physics program. The paper summarizes and updates the discussion submitted to the European Strategy on Particle Physics. After construction of an approximately 90 km tunnel, an electron-positron collider based on established technologies allows world-record instantaneous luminosities at center-of-mass energies from the Z resonance up to tt thresholds, enabling a rich set of fundamental measurements including Higgs couplings determinations at the sub percent level, precision tests of the weak and strong forces, and searches for new particles, including dark matter, both directly and via virtual corrections or mixing. Among other possibilities, the FCC-ee will be able to (i) indirectly discover new particles coupling to the Higgs and/or electroweak bosons up to scales around 7 and 50 TeV, respectively; (ii) perform competitive SUSY tests at the loop level in regions not accessible at the LHC; (iii) study heavy-flavor and tau physics in ultra-rare decays beyond the LHC reach, and (iv) achieve the best potential in direct collider searches for dark matter, sterile neutrinos, and axion-like particles with masses up to around 90 GeV. The tunnel can then be reused for a proton-proton collider, establishing record center-of-mass collision energy, allowing unprecedented reach for direct searches for new particles up to the around 50 TeV scale, and a diverse program of measurements of the Standard Model and Higgs boson, including a precision measurement of the Higgs self-coupling, and conclusively testing weakly-interacting massive particle scenarios of thermal relic dark matter. △ Less

Submitted 19 December, 2022; v1 submitted 12 March, 2022; originally announced March 2022.

Comments: 84 pages

MSC Class: for Snowmass 2021

Tracking charged particles in the zero curvature limit

Authors: J. Alcaraz Maestre

Abstract: In this report we discuss appropriate strategies for the tracking of charged particles in the limit of zero curvature. The suggested approach avoids special treatments and precision issues that frequently arise in that limit. We provide explicit expressions for transport, refitting and vertexing in regions where magnetic field inhomogeneities or detector interaction effects can be approximately ig… ▽ More In this report we discuss appropriate strategies for the tracking of charged particles in the limit of zero curvature. The suggested approach avoids special treatments and precision issues that frequently arise in that limit. We provide explicit expressions for transport, refitting and vertexing in regions where magnetic field inhomogeneities or detector interaction effects can be approximately ignored. △ Less

Submitted 2 September, 2021; originally announced September 2021.

Report number: CIEMAT Technical Report 1487, ISBN/ISSN: 2695-8864, NIPO: 832-21-005-X, CIEMAT, September 2021, https://cpage.mpr.gob.es/

Finite-size effects and thermodynamic limit in one-dimensional Janus fluids

Authors: R. Fantoni, M. A. G. Maestre, A. Santos

Abstract: The equilibrium properties of a Janus fluid made of two-face particles confined to a one-dimensional channel are revisited. The exact Gibbs free energy for a finite number of particles $N$ is exactly derived for both quenched and annealed realizations. It is proved that the results for both classes of systems tend in the thermodynamic limit ($N\to\infty$) to a common expression recently derived (M… ▽ More The equilibrium properties of a Janus fluid made of two-face particles confined to a one-dimensional channel are revisited. The exact Gibbs free energy for a finite number of particles $N$ is exactly derived for both quenched and annealed realizations. It is proved that the results for both classes of systems tend in the thermodynamic limit ($N\to\infty$) to a common expression recently derived (Maestre M A G and Santos A 2020 J Stat Mech 063217). The theoretical finite-size results are particularized to the Kern--Frenkel model and confirmed by Monte Carlo simulations for quenched and (both biased and unbiased) annealed systems. △ Less

Submitted 28 October, 2021; v1 submitted 29 July, 2021; originally announced July 2021.

Comments: 23 one-column pages, 6 figures; v2: minor changes

Journal ref: J. Stat. Mech., 103210 (2021)

The Z lineshape challenge: ppm and keV measurements

Authors: Juan Alcaraz Maestre, Alain Blondel, Mogens Dam, Patrick Janot

Abstract: The FCC-ee offers powerful opportunities for direct or indirect evidence for physics beyond the Standard Model, via a combination of high precision measurements and searches for forbidden and rare processes and feebly coupled particles. A key element of FCC-ee physics program is the measurement of the Z lineshape from a total of $5\times 10^{12}$ Z bosons and a beam-energy calibration with relativ… ▽ More The FCC-ee offers powerful opportunities for direct or indirect evidence for physics beyond the Standard Model, via a combination of high precision measurements and searches for forbidden and rare processes and feebly coupled particles. A key element of FCC-ee physics program is the measurement of the Z lineshape from a total of $5\times 10^{12}$ Z bosons and a beam-energy calibration with relative uncertainty of $10^{-6}$. With this exceptionally large event sample, five orders of magnitude larger than that accumulated during the whole LEP1 operation at the Z pole, the defining parameters - $m_{\rm Z}$, $Γ_{\rm Z}$, $N_ν$, $\sin^2θ_{\rm W}^{\rm eff}$, $α_{\rm S}(m_{\rm Z}^2)$, and $α_{\rm QED}(m^2_{\rm Z})$ - can be extracted with a leap in accuracy of up to two orders of magnitude with respect to the current state of the art. The ultimate goal that experimental and theory systematic errors match the statistical accuracy (4\,keV on the Z mass and width, $3\times 10^{-6}$ on $\sin^2θ_{\rm W}^{\rm eff}$, a relative $3\times 10^{-5}$ on $α_{\rm QED}$, and less than 0.0001 on $α_{\rm S}$) leads to highly demanding requirements on collider operation, beam instrumentation, detector design, computing facilities, theoretical calculations, and Monte Carlo event generators. Such precise measurements also call for innovative analysis methods, which require a joint effort and understanding between theorists, experimenters, and accelerator teams. △ Less

Submitted 1 July, 2021; originally announced July 2021.

Comments: Submitted to EPJ+ special issue: A future Higgs and Electroweak factory (FCC): Challenges towards discovery, Focus on FCC-ee

Journal ref: Eur. Phys. J. Plus 136, 848 (2021)

Revisiting QCD corrections to the forward-backward charge asymmetry of heavy quarks in electron-positron collisions at the Z pole: really a problem?

Authors: Juan Alcaraz Maestre

Abstract: We review in some detail the QCD corrections to the measurement of the forward-backward charge asymmetry of heavy quarks in the $\mathrm{e^+e^-\rightarrow Q\overline{Q}(g)}$ process at the Z pole. We show that the size of these corrections can be reduced by an order of magnitude by using simple cuts on jet acollinearity. Such a reduction is expected to lead to systematic uncertainties at the… ▽ More We review in some detail the QCD corrections to the measurement of the forward-backward charge asymmetry of heavy quarks in the $\mathrm{e^+e^-\rightarrow Q\overline{Q}(g)}$ process at the Z pole. We show that the size of these corrections can be reduced by an order of magnitude by using simple cuts on jet acollinearity. Such a reduction is expected to lead to systematic uncertainties at the $Δ\mathrm{A_{FB}^{0,Q}} \approx 10^{-4}$ level, opening up the path to high precision electroweak measurements with heavy flavors at future high luminosity $\mathrm{e^+e^-}$ colliders like the FCC-ee. △ Less

Submitted 23 December, 2020; v1 submitted 16 October, 2020; originally announced October 2020.

Comments: 21 pages, 4 figures

The Data Science Fire Next Time: Innovative strategies for mentoring in data science

Authors: Latifa Jackson, Heriberto Acosta Maestre

Abstract: As data mining research and applications continue to expand in to a variety of fields such as medicine, finance, security, etc., the need for talented and diverse individuals is clearly felt. This is particularly the case as Big Data initiatives have taken off in the federal, private and academic sectors, providing a wealth of opportunities, nationally and internationally. The Broadening Participa… ▽ More As data mining research and applications continue to expand in to a variety of fields such as medicine, finance, security, etc., the need for talented and diverse individuals is clearly felt. This is particularly the case as Big Data initiatives have taken off in the federal, private and academic sectors, providing a wealth of opportunities, nationally and internationally. The Broadening Participation in Data Mining (BPDM) workshop was created more than 7 years ago with the goal of fostering mentorship, guidance, and connections for minority and underrepresented groups in the data science and machine learning community, while also enriching technical aptitude and exposure for a group of talented students. To date it has impacted the lives of more than 330 underrepresented trainees in data science. We provide a venue to connect talented students with innovative researchers in industry, academia, professional societies, and government. Our mission is to facilitate meaningful, lasting relationships between BPDM participants to ultimately increase diversity in data mining. This most recent workshop took place at Howard University in Washington, DC in February 2019. Here we report on the mentoring strategies that we undertook at the 2019 BPDM and how those were received. △ Less

Submitted 29 February, 2020; originally announced March 2020.

One-dimensional Janus fluids. Exact solution and map** from the quenched to the annealed system

Authors: M. A. G. Maestre, A. Santos

Abstract: The equilibrium properties of a Janus fluid confined to a one-dimensional channel are exactly derived. The fluid is made of particles with two faces (active and passive), so that the pair interaction is that of hard spheres, except if the two active faces are in front of each other, in which case the interaction has a square-well attractive tail. Our exact solution refers to quenched systems (i.e.… ▽ More The equilibrium properties of a Janus fluid confined to a one-dimensional channel are exactly derived. The fluid is made of particles with two faces (active and passive), so that the pair interaction is that of hard spheres, except if the two active faces are in front of each other, in which case the interaction has a square-well attractive tail. Our exact solution refers to quenched systems (i.e., each particle has a fixed face orientation), but we argue by means of statistical-mechanical tools that the results also apply to annealed systems (i.e., each particle can flip its orientation) in the thermodynamic limit. Comparison between theoretical results and Monte Carlo simulations for quenched and annealed systems, respectively, shows an excellent agreement. △ Less

Submitted 30 June, 2020; v1 submitted 28 February, 2020; originally announced February 2020.

Comments: 34 pages, 12 figures; v2: several changes and two additional figures

Journal ref: J. Stat. Mech., 063217 (2020)

Study of the effects of radiation on the CMS Drift Tubes Muon Detector for the HL-LHC

Authors: G. Abbiendi, J. Alcaraz Maestre, A. Álvarez Fernández, B. Álvarez González, N. Amapane, I. Bachiller, J. M. Barcala, L. Barcellan, C. Battilana, M. Bellato, G. Bencze, M. Benettoni, N. Beni, A. Benvenuti, L. C. Blanco Ramos, A. Boletti, A. Bragagnolo, J. A. Brochero Cifuentes, V. Cafaro, A. Calderon, E. Calvo, A. Cappati, R. Carlin, C. A. Carrillo Montoya, F. R. Cavallo , et al. (118 additional authors not shown)

Abstract: The CMS drift tubes (DT) muon detector, built for withstanding the LHC expected integrated and instantaneous luminosities, will be used also in the High Luminosity LHC (HL-LHC) at a 5 times larger instantaneous luminosity and, consequently, much higher levels of radiation, reaching about 10 times the LHC integrated luminosity. Initial irradiation tests of a spare DT chamber at the CERN gamma irrad… ▽ More The CMS drift tubes (DT) muon detector, built for withstanding the LHC expected integrated and instantaneous luminosities, will be used also in the High Luminosity LHC (HL-LHC) at a 5 times larger instantaneous luminosity and, consequently, much higher levels of radiation, reaching about 10 times the LHC integrated luminosity. Initial irradiation tests of a spare DT chamber at the CERN gamma irradiation facility (GIF++), at large ($\sim$O(100)) acceleration factor, showed ageing effects resulting in a degradation of the DT cell performance. However, full CMS simulations have shown almost no impact in the muon reconstruction efficiency over the full barrel acceptance and for the full integrated luminosity. A second spare DT chamber was moved inside the GIF++ bunker in October 2017. The chamber was being irradiated at lower acceleration factors, and only 2 out of the 12 layers of the chamber were switched at working voltage when the radioactive source was active, being the other layers in standby. In this way the other non-aged layers are used as reference and as a precise and unbiased telescope of muon tracks for the efficiency computation of the aged layers of the chamber, when set at working voltage for measurements. An integrated dose equivalent to two times the expected integrated luminosity of the HL-LHC run has been absorbed by this second spare DT chamber and the final impact on the muon reconstruction efficiency is under study. Direct inspection of some extracted aged anode wires presented a melted resistive deposition of materials. Investigation on the outgassing of cell materials and of the gas components used at the GIF++ are underway. Strategies to mitigate the ageing effects are also being developed. From the long irradiation measurements of the second spare DT chamber, the effects of radiation in the performance of the DTs expected during the HL-LHC run will be presented. △ Less

Submitted 12 December, 2019; originally announced December 2019.

Comments: 10 pages, 7 figures, to be published in JINST, editor I. González Caballero

Report number: CMS CR-2019/159

Journal ref: JINST 14 C12010 (2019)

Dark Matter Benchmark Models for Early LHC Run-2 Searches: Report of the ATLAS/CMS Dark Matter Forum

Authors: Daniel Abercrombie, Nural Akchurin, Ece Akilli, Juan Alcaraz Maestre, Brandon Allen, Barbara Alvarez Gonzalez, Jeremy Andrea, Alexandre Arbey, Georges Azuelos, Patrizia Azzi, Mihailo Backović, Yang Bai, Swagato Banerjee, James Beacham, Alexander Belyaev, Antonio Boveia, Amelia Jean Brennan, Oliver Buchmueller, Matthew R. Buckley, Giorgio Busoni, Michael Buttignol, Giacomo Cacciapaglia, Regina Caputo, Linda Carpenter, Nuno Filipe Castro , et al. (114 additional authors not shown)

Abstract: This document is the final report of the ATLAS-CMS Dark Matter Forum, a forum organized by the ATLAS and CMS collaborations with the participation of experts on theories of Dark Matter, to select a minimal basis set of dark matter simplified models that should support the design of the early LHC Run-2 searches. A prioritized, compact set of benchmark models is proposed, accompanied by studies of t… ▽ More This document is the final report of the ATLAS-CMS Dark Matter Forum, a forum organized by the ATLAS and CMS collaborations with the participation of experts on theories of Dark Matter, to select a minimal basis set of dark matter simplified models that should support the design of the early LHC Run-2 searches. A prioritized, compact set of benchmark models is proposed, accompanied by studies of the parameter space of these models and a repository of generator implementations. This report also addresses how to apply the Effective Field Theory formalism for collider searches and present the results of such interpretations. △ Less

Submitted 3 July, 2015; originally announced July 2015.

Journal ref: Phys. Dark Univ. 26 (2019) 100371

Observation of the rare $B^0_s\toμ^+μ^-$ decay from the combined analysis of CMS and LHCb data

Authors: The CMS, LHCb Collaborations, :, V. Khachatryan, A. M. Sirunyan, A. Tumasyan, W. Adam, T. Bergauer, M. Dragicevic, J. Erö, M. Friedl, R. Frühwirth, V. M. Ghete, C. Hartl, N. Hörmann, J. Hrubec, M. Jeitler, W. Kiesenhofer, V. Knünz, M. Krammer, I. Krätschmer, D. Liko, I. Mikulec, D. Rabady, B. Rahbaran , et al. (2807 additional authors not shown)

Abstract: A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six sta… ▽ More A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six standard deviations, and the best measurement of its branching fraction so far. Furthermore, evidence for the $B^0\toμ^+μ^-$ decay is obtained with a statistical significance of three standard deviations. The branching fraction measurements are statistically compatible with SM predictions and impose stringent constraints on several theories beyond the SM. △ Less

Submitted 17 August, 2015; v1 submitted 17 November, 2014; originally announced November 2014.

Comments: Correspondence should be addressed to [email protected]

Report number: CERN-PH-EP-2014-220, CMS-BPH-13-007, LHCb-PAPER-2014-049

Journal ref: Nature 522, 68-72 (04 June 2015)

Phase diagrams of Janus fluids with up-down constrained orientations

Authors: Riccardo Fantoni, Achille Giacometti, Miguel Ángel G. Maestre, Andrés Santos

Abstract: A class of binary mixtures of Janus fluids formed by colloidal spheres with the hydrophobic hemispheres constrained to point either up or down are studied by means of Gibbs ensemble Monte Carlo simulations and simple analytical approximations. These fluids can be experimentally realized by the application of an external static electrical field. The gas-liquid and demixing phase transitions in five… ▽ More A class of binary mixtures of Janus fluids formed by colloidal spheres with the hydrophobic hemispheres constrained to point either up or down are studied by means of Gibbs ensemble Monte Carlo simulations and simple analytical approximations. These fluids can be experimentally realized by the application of an external static electrical field. The gas-liquid and demixing phase transitions in five specific models with different patch-patch affinities are analyzed. It is found that a gas-liquid transition is present in all the models, even if only one of the four possible patch-patch interactions is attractive. Moreover, provided the attraction between like particles is stronger than between unlike particles, the system demixes into two subsystems with different composition at sufficiently low temperatures and high densities. △ Less

Submitted 9 November, 2013; v1 submitted 18 October, 2013; originally announced October 2013.

Comments: 10 pages, 6 figures

Journal ref: J. Chem. Phys. 139, 174902 (2013)

Janus fluid with fixed patch orientations: theory and simulations

Authors: Miguel Ángel G. Maestre, Riccardo Fantoni, Achille Giacometti, Andrés Santos

Abstract: We study thermophysical properties of a Janus fluid with constrained orientations, using analytical techniques and numerical simulations. The Janus character is modeled by means of a Kern-Frenkel potential where each sphere has one hemisphere of square-well and the other of hard-sphere character. The orientational constraint is enforced by assuming that each hemisphere can only point either North… ▽ More We study thermophysical properties of a Janus fluid with constrained orientations, using analytical techniques and numerical simulations. The Janus character is modeled by means of a Kern-Frenkel potential where each sphere has one hemisphere of square-well and the other of hard-sphere character. The orientational constraint is enforced by assuming that each hemisphere can only point either North or South with equal probability. The analytical approach hinges on a map** of the above Janus fluid onto a binary mixture interacting via a "quasi" isotropic potential. The anisotropic nature of the original Kern-Frenkel potential is reflected by the asymmetry in the interactions occurring between the unlike components of the mixture. A rational-function approximation extending the corresponding symmetric case is obtained in the sticky limit, where the square-well becomes infinitely narrow and deep, and allows a fully analytical approach. Notwithstanding the rather drastic approximations in the analytical theory, this is shown to provide a rather precise estimate of the structural and thermodynamical properties of the original Janus fluid. △ Less

Submitted 7 March, 2013; v1 submitted 21 December, 2012; originally announced December 2012.

Comments: 20 pages, 10 figures; v2: minor changes plus corrections of typos [Eqs. (A6), (A17), and (A26)-(A28)] appearing in the published version

Journal ref: J. Chem. Phys. 138, 094904 (2013)

The SM and NLO Multileg and SM MC Working Groups: Summary Report

Authors: J. Alcaraz Maestre, S. Alioli, J. R. Andersen, R. D. Ball, A. Buckley, M. Cacciari, F. Campanario, N. Chanon, G. Chachamis, V. Ciulli, F. Cossutti, G. Cullen, A. Denner, S. Dittmaier, J. Fleischer, R. Frederix, S. Frixione, J. Gao, L. Garren, S. Gascon-Shotkin, N. Greiner, J. P. Guillet, T. Hapola, N. P. Hartland, G. Heinrich , et al. (57 additional authors not shown)

Abstract: The 2011 Les Houches workshop was the first to confront LHC data. In the two years since the previous workshop there have been significant advances in both soft and hard QCD, particularly in the areas of multi-leg NLO calculations, the inclusion of those NLO calculations into parton shower Monte Carlos, and the tuning of the non-perturbative parameters of those Monte Carlos. These proceedings desc… ▽ More The 2011 Les Houches workshop was the first to confront LHC data. In the two years since the previous workshop there have been significant advances in both soft and hard QCD, particularly in the areas of multi-leg NLO calculations, the inclusion of those NLO calculations into parton shower Monte Carlos, and the tuning of the non-perturbative parameters of those Monte Carlos. These proceedings describe the theoretical advances that have taken place, the impact of the early LHC data, and the areas for future development. △ Less

Submitted 9 May, 2012; v1 submitted 29 March, 2012; originally announced March 2012.

Comments: 220 pages

On the relation between virial coefficients and the close-packing of hard disks and hard spheres

Authors: Miguel Ángel G. Maestre, Andrés Santos, Miguel Robles, Mariano López de Haro

Abstract: The question of whether the known virial coefficients are enough to determine the packing fraction $η_\infty$ at which the fluid equation of state of a hard-sphere fluid diverges is addressed. It is found that the information derived from the direct Padé approximants to the compressibility factor constructed with the virial coefficients is inconclusive. An alternative approach is proposed which ma… ▽ More The question of whether the known virial coefficients are enough to determine the packing fraction $η_\infty$ at which the fluid equation of state of a hard-sphere fluid diverges is addressed. It is found that the information derived from the direct Padé approximants to the compressibility factor constructed with the virial coefficients is inconclusive. An alternative approach is proposed which makes use of the same virial coefficients and of the equation of state in a form where the packing fraction is explicitly given as a function of the pressure. The results of this approach both for hard-disk and hard-sphere fluids, which can straightforwardly accommodate higher virial coefficients when available, lends support to the conjecture that $η_\infty$ is equal to the maximum packing fraction corresponding to an ordered crystalline structure. △ Less

Submitted 24 February, 2011; v1 submitted 22 December, 2010; originally announced December 2010.

Comments: 10 pages, 6 figures; v2: discussion about hard-square and hard-hexagon systems on a lattice added; five new references

Journal ref: J. Chem. Phys. 134, 084502 (2011)