-
The Potsdam astroComb (POCO) Part I: Mode crossing effect in feedback resonators
Authors:
Daniel Bodenmüller,
Kalaga Madhav,
Martin Roth
Abstract:
We investigate theoretically and experimentally the mode interaction in an integrated Silicon Nitride (Si3N4) microring resonator with interferometric coupling realized by a feedback loop as an adjustable optical path path length connecting the ring to the bus waveguide at two coupling sections. From the transmission spectra recorded at different optical path lengths, two resonances, 1596.5~nm and…
▽ More
We investigate theoretically and experimentally the mode interaction in an integrated Silicon Nitride (Si3N4) microring resonator with interferometric coupling realized by a feedback loop as an adjustable optical path path length connecting the ring to the bus waveguide at two coupling sections. From the transmission spectra recorded at different optical path lengths, two resonances, 1596.5~nm and 1570.5~nm, were selected for detailed investigation. Both resonances show the possibility of adjusting the resonance width and depth. However, the transmission spectra around the first resonance also show the effect of mode interaction. This is also well captured in the theoretical model, from which we can derive a coupling rate for the mode interaction of $3.4~\textrm{rad}~\textrm{ns}^{-1}$.
△ Less
Submitted 22 November, 2023;
originally announced November 2023.
-
Characterization of a C-RED One camera for astrophotonical applications
Authors:
Stella Vješnica,
Eloy Hernandez,
Kalaga Madhav,
Martin M. Roth
Abstract:
To better understand the impact of the avalanche gain applied in the detector technology and apply this technology in our in-house astrophotonic projects, we have characterized a C-RED One camera and produced a stable and reliable method for calculating the system gain at any desired avalanche gain setting. We observed that depending on how the system gain is obtained, multiplying the system gain…
▽ More
To better understand the impact of the avalanche gain applied in the detector technology and apply this technology in our in-house astrophotonic projects, we have characterized a C-RED One camera and produced a stable and reliable method for calculating the system gain at any desired avalanche gain setting. We observed that depending on how the system gain is obtained, multiplying the system gain times the avalanche gain may not accurately produce a conversion factor from electrons to ADUs. Since the acquisition of a photon transfer curve (PTC) was possible at different avalanche gain levels, several PTCs at low avalanche gain levels were acquired. Consequently, a linear fit was produced from the acquired system gain as a function of the avalanche gain setting. Through the linear fit, the effective system gain was calculated at any desired avalanche level. The effective system gain makes possible to accurately calculate the initial system gain without the ambiguity introduced by the non-linearity of the system. Besides, the impact of the avalanche gain on the dynamic range was also analyzed and showed a stable behaviour through the measured avalanche range.
△ Less
Submitted 22 September, 2023;
originally announced September 2023.
-
Practical demonstration of a six-telescope integrated optics beam combiner for the astronomical J- and H-band manufactured with ultrafast laser inscription
Authors:
Aline N. Dinkelaker,
Sebastian Smarzyk,
Abani S. Nayak,
Simone Piacentini,
Giacomo Corrielli,
Roberto Osellame,
Ettore Pedretti,
Martin M. Roth,
Kalaga Madhav
Abstract:
We have built and characterized a six-telescope near-infrared discrete beam combiner (DBC) for stellar interferometry using the technique of ultrafast laser inscription (ULI). The 3D beam combiner consists of evanescently coupled waveguides fabricated in borosilicate glass, with a throughput of around 56%. Devices of two design types are characterized over the astronomical J and H band. Using the…
▽ More
We have built and characterized a six-telescope near-infrared discrete beam combiner (DBC) for stellar interferometry using the technique of ultrafast laser inscription (ULI). The 3D beam combiner consists of evanescently coupled waveguides fabricated in borosilicate glass, with a throughput of around 56%. Devices of two design types are characterized over the astronomical J and H band. Using the 15 non-redundant combinations of pairs, we populate the elements of the visibility-to-pixel matrix (V2PM) of the beam combiner using a two-input Michelson interferometer setup. We identify the complex visibility as wavelength dependent, with different optimum wavelengths for the two types of devices. For the design that includes a fan-in region, a baseline-averaged mean visibility amplitude of 1.05 and relative precision of 2.9% and 3.8% are extracted for characterization at 1328 nm and 1380 nm, respectively. Operation is also possible in the H-band, with a relative precision of 4.8% at 1520 nm. Broadband characterization is subject to dispersion effects, but gives similar performance results to their monochromatic counterparts in the J-band at 1350 nm.
△ Less
Submitted 18 June, 2023;
originally announced June 2023.
-
Astrophotonics: photonic integrated circuits for astronomical instrumentation
Authors:
Martin M. Roth,
Kalaga Madhav,
Andreas Stoll,
Daniel Bodenmueller,
Aline Dinkelaker,
Aashia Rahman,
Eloy Hernandez,
Alan Guenther,
Stella Vjesnica
Abstract:
Photonic Integrated Circuits (PIC) are best known for their important role in the telecommunication sector, e.g. high speed communication devices in data centers. However, PIC also hold the promise for innovation in sectors like life science, medicine, sensing, automotive etc. The past two decades have seen efforts of utilizing PIC to enhance the performance of instrumentation for astronomical tel…
▽ More
Photonic Integrated Circuits (PIC) are best known for their important role in the telecommunication sector, e.g. high speed communication devices in data centers. However, PIC also hold the promise for innovation in sectors like life science, medicine, sensing, automotive etc. The past two decades have seen efforts of utilizing PIC to enhance the performance of instrumentation for astronomical telescopes, perhaps the most spectacular example being the integrated optics beam combiner for the interferometer GRAVITY at the ESO Very Large Telescope. This instrument has enabled observations of the supermassive black hole in the center of the Milky Way at unprecedented angular resolution, eventually leading to the Nobel Price for Physics in 2020. Several groups worldwide are actively engaged in the emerging field of astrophotonics research, amongst them the innoFSPEC Center in Potsdam, Germany. We present results for a number of applications developed at innoFSPEC, notably PIC for integrated photonic spectrographs on the basis of arrayed waveguide gratings and the PAWS demonstrator (Potsdam Arrayed Waveguide Spectrograph), PIC-based ring resonators in astronomical frequency combs for precision wavelength calibration, discrete beam combiners (DBC) for large astronomical interferometers, as well as aperiodic fiber Bragg gratings for complex astronomical filters and their possible derivatives in PIC.
△ Less
Submitted 13 February, 2023;
originally announced February 2023.
-
MARCOT Pathfinder at Calar Alto Progress Report
Authors:
Martin M. Roth,
Jesús Aceituno,
José L. Ortiz,
Kalaga Madhav,
Stefan Cikota,
John Davenport,
Pedro Amado,
Fran Pozuelos,
Rafael Luque,
Nicolas Morales
Abstract:
MARCOT Pathfinder is a precursor for MARCOT (Multi Array of Combined Telescopes) at Calar Alto Observatory (CAHA) in Spain. MARCOT is intended to provide CARMENES, currently fiber-fed from the CAHA 3.5m Telescope, with a 5-15m light collecting area from a battery of several tens of small telescopes that are incoherently fed into the final joint single fiber feed of the spectrograph. The modular co…
▽ More
MARCOT Pathfinder is a precursor for MARCOT (Multi Array of Combined Telescopes) at Calar Alto Observatory (CAHA) in Spain. MARCOT is intended to provide CARMENES, currently fiber-fed from the CAHA 3.5m Telescope, with a 5-15m light collecting area from a battery of several tens of small telescopes that are incoherently fed into the final joint single fiber feed of the spectrograph. The modular concept, based on commercially available telescopes, results in cost estimates that are a fraction of the ones for extremely large telescopes (ELT). As a novel approach, MARCOT will employ Multi-Mode Photonic Lanterns (MM-PL) that are being developed as a variant of classical photonic lanterns, to combine the light from the individual telescopes to a single fiber feed to the instrument. This progress report presents the overall concept of MARCOT, the pathfinder telescope and enclosure that is being commissioned at CAHA, the concept of MM-PL, and the next step of installing the Potsdam Multiplex Raman Spectrograph (MRS). MARCOT Pathfinder will be used to validate the conceptual design and predicted performance of MM-PL on sky with a 7 unit telescope prototype.
△ Less
Submitted 5 July, 2022;
originally announced July 2022.
-
Design, simulation and characterization of integrated photonic spectrographs for Astronomy II: Low-aberration Generation-II AWG devices with three stigmatic points
Authors:
Andreas Stoll,
Kalaga Madhav,
Martin Roth
Abstract:
In the second part of our series on integrated photonic spectrographs for astronomy, we present theoretical and experimental results on the design, simulation and characterization of custom-manufactured silica-on-silicon Arrayed Waveguide Gratings (AWGs) constructed using the three-stigmatic-point method. We derive several mid-to-high resolution field-flattened AWG designs, targeting resolving pow…
▽ More
In the second part of our series on integrated photonic spectrographs for astronomy, we present theoretical and experimental results on the design, simulation and characterization of custom-manufactured silica-on-silicon Arrayed Waveguide Gratings (AWGs) constructed using the three-stigmatic-point method. We derive several mid-to-high resolution field-flattened AWG designs, targeting resolving powers of 11,000 - 35,000 in the astronomical H-band, by iterative computation of differential coefficients of the optical path function. We use numerical simulations to study the imaging properties of the designs in a wide wavelength range between 1500 nm and 1680 nm. We theoretically discuss the design-specific degradation of spectral resolving power at far-off-centre wavelengths and suggest possible solutions. In the experimental section, we provide characterization results of seven manufactured AWG devices of varying free spectral range and resolution. We obtain estimates on spectral resolving powers of up to 27,600 for polarized input at 1550 nm from measurements of the channel transmission bandwidth. Furthermore, we numerically predict expected resolving powers of up to 36,000 in polarized mode and up to 24,000 in unpolarized mode for direct continuous imaging of the spectrum.
△ Less
Submitted 10 October, 2021;
originally announced October 2021.
-
Design, simulation and characterization of integrated photonic spectrographs for Astronomy I: Generation-I AWG devices based on canonical layouts
Authors:
Andreas Stoll,
Kalaga V. Madhav,
Martin M. Roth
Abstract:
We present an experimental study on our first generation of custom-developed arrayed waveguide gratings (AWG) on silica platform for spectroscopic applications in near-infrared astronomy. We provide a comprehensive description of the design, numerical simulation and characterization of several AWG devices aimed at spectral resolving powers of 15,000 - 60,000 in the astronomical H-band. We evaluate…
▽ More
We present an experimental study on our first generation of custom-developed arrayed waveguide gratings (AWG) on silica platform for spectroscopic applications in near-infrared astronomy. We provide a comprehensive description of the design, numerical simulation and characterization of several AWG devices aimed at spectral resolving powers of 15,000 - 60,000 in the astronomical H-band. We evaluate the spectral characteristics of the fabricated devices in terms of insertion loss and estimated spectral resolving power and compare the results with numerical simulations. We estimate resolving powers of up to 18,900 from the output channel 3-dB transmission bandwidth. Based on the first characterization results, we select two candidate AWGs for further processing by removal of the output waveguide array and polishing the output facet to optical quality with the goal of integration as the primary diffractive element in a cross-dispersed spectrograph. We further study the imaging properties of the processed AWGs with regards to spectral resolution in direct imaging mode, geometry-related defocus aberration, and polarization sensitivity of the spectral image. We identify phase error control, birefringence control, and aberration suppression as the three key areas of future research and development in the field of high-resolution AWG-based spectroscopy in astronomy.
△ Less
Submitted 13 July, 2021;
originally announced July 2021.
-
Mode expansion theory and application in step-index multimode fibres for astronomical spectroscopy
Authors:
E. Hernandez,
M. M. Roth,
K. Petermann,
A. Kelz,
B. Moralejo,
K. Madhav
Abstract:
In astronomical spectroscopy, optical fibres are abundantly used for multiplexing and decoupling the spectrograph from the telescope to provide stability in a controlled environment. However, fibres are less than perfect optical components and introduce complex effects that diminish the overall throughput, efficiency, and stability of the instrument.
We present a novel numerical field propagatio…
▽ More
In astronomical spectroscopy, optical fibres are abundantly used for multiplexing and decoupling the spectrograph from the telescope to provide stability in a controlled environment. However, fibres are less than perfect optical components and introduce complex effects that diminish the overall throughput, efficiency, and stability of the instrument.
We present a novel numerical field propagation model that emulates the effects of modal noise, scrambling, and focal ratio degradation with a rigorous treatment of wave optics. We demonstrate that the simulation of the near- and far-field output of a fiber, injected into a ray-tracing model of the spectrograph, allows to assess performance at the detector level.
△ Less
Submitted 4 May, 2021; v1 submitted 3 May, 2021;
originally announced May 2021.
-
Optimal SMF packing in photonic lanterns: comparing theoretical topology to practical packing arrangements
Authors:
John J. Davenport,
Momen Diab,
Kalaga Madhav,
Martin M. Roth
Abstract:
Photonic lanterns rely on a close packed arrangement of single mode fibers, which are tapered and fused into one multi-mode core. Topologically optimal circle packing arrangements have been well studied. Using this, we fabricate PLs with 19 and 37 SMFs showing tightly packed, ordered arrangements with packing densities of 95 % and 99 % of theoretically achievable values, with mean adjacent core se…
▽ More
Photonic lanterns rely on a close packed arrangement of single mode fibers, which are tapered and fused into one multi-mode core. Topologically optimal circle packing arrangements have been well studied. Using this, we fabricate PLs with 19 and 37 SMFs showing tightly packed, ordered arrangements with packing densities of 95 % and 99 % of theoretically achievable values, with mean adjacent core separations of 1.03 and 1.08 fiber diameters, respectively. We demonstrate that topological circle packing data is a good predictor for optimal PL parameters.
△ Less
Submitted 19 April, 2021;
originally announced April 2021.
-
Simulations of mode-selective photonic lanterns for efficient coupling of starlight into the single-mode regime
Authors:
Momen Diab,
Aashana Tripathi,
John Davenport,
Aline N. Dinkelaker,
Kalaga Madhav,
Martin M. Roth
Abstract:
In ground-based astronomy, starlight distorted by the atmosphere couples poorly into single-mode waveguides but a correction by adaptive optics, even if only partial, can boost coupling into the few-mode regime allowing the use of photonic lanterns to convert into multiple single-mode beams. Corrected wavefronts result in focal patterns that couple mostly with the circularly symmetric waveguide mo…
▽ More
In ground-based astronomy, starlight distorted by the atmosphere couples poorly into single-mode waveguides but a correction by adaptive optics, even if only partial, can boost coupling into the few-mode regime allowing the use of photonic lanterns to convert into multiple single-mode beams. Corrected wavefronts result in focal patterns that couple mostly with the circularly symmetric waveguide modes. A mode-selective photonic lantern is hence proposed to convert the multimode light into a subset of the single-mode waveguides of the standard photonic lantern, thereby reducing the required number of outputs. We ran simulations to show that only two out of the six waveguides of a 1x6 photonic lantern carry >95% of the coupled light to the outputs at $D/r_0 < 10$ if the wavefront is partially corrected and the photonic lantern is made mode-selective.
△ Less
Submitted 25 March, 2021;
originally announced March 2021.
-
Performance limits of astronomical arrayed waveguide gratings on silica platform
Authors:
Andreas Stoll,
Kalaga Madhav,
Martin Roth
Abstract:
We present a numerical and experimental study of the impact of phase errors on the performance of large, high-resolution Arrayed Waveguide Gratings (AWG) for applications in astronomy. We use a scalar diffraction model to study the transmission spectrum of an AWG under random variations of the optical waveguide lengths. We simulate phase error correction by numerically trimming the lengths of the…
▽ More
We present a numerical and experimental study of the impact of phase errors on the performance of large, high-resolution Arrayed Waveguide Gratings (AWG) for applications in astronomy. We use a scalar diffraction model to study the transmission spectrum of an AWG under random variations of the optical waveguide lengths. We simulate phase error correction by numerically trimming the lengths of the optical waveguides to the nearest integer multiple of the central wavelength. The optical length error distribution of a custom-fabricated silica AWG is measured using frequency-domain interferometry and Monte-Carlo fitting of interferogram intensities. In the end, we give an estimate for the phase-error limited size of a waveguide array manufactured using state-of-the-art technology. We show that post-processing eliminates phase errors as a performance limiting factor for astronomical spectroscopy in the H-band.
△ Less
Submitted 4 December, 2020;
originally announced December 2020.
-
Starlight coupling through atmospheric turbulence into few-mode fibers and photonic lanterns in the presence of partial adaptive optics correction
Authors:
Momen Diab,
Aline N. Dinkelaker,
John Davenport,
Kalaga Madhav,
Martin M. Roth
Abstract:
Starlight corrupted by atmospheric turbulence cannot couple efficiently into astronomical instruments based on integrated optics as they require light of high spatial coherence to couple into their single-mode waveguides. Low-order adaptive optics in combination with photonic lanterns offer a practical approach to achieve efficient coupling into multiplexed astrophotonic devices. We investigate, a…
▽ More
Starlight corrupted by atmospheric turbulence cannot couple efficiently into astronomical instruments based on integrated optics as they require light of high spatial coherence to couple into their single-mode waveguides. Low-order adaptive optics in combination with photonic lanterns offer a practical approach to achieve efficient coupling into multiplexed astrophotonic devices. We investigate, aided by simulations and an experimental testbed, the trade-off between the degrees of freedom of the adaptive optics system and those of the input waveguide of an integrated optic component leading to a cost-effective hybrid system that achieves a signal-to-noise ratio higher than a standalone device fed by a single-mode fiber.
△ Less
Submitted 26 November, 2020;
originally announced November 2020.
-
Complex phase masks for fabricating OH-suppression filters for astronomy
Authors:
Aashia Rahman,
Kalaga Madhav,
Martin M. Roth
Abstract:
The design of a complex phase mask (CPM) for inscribing aperiodic filters in fibers is presented. The complex structure of the mask surface relief consists of discrete aperiodic phase-steps at periodic intervals. We show that the diffraction of the inscribing laser beam from the phase-step locations of the CPM produces periodically located half phase-steps along the fiber. The accumulated phase, a…
▽ More
The design of a complex phase mask (CPM) for inscribing aperiodic filters in fibers is presented. The complex structure of the mask surface relief consists of discrete aperiodic phase-steps at periodic intervals. We show that the diffraction of the inscribing laser beam from the phase-step locations of the CPM produces periodically located half phase-steps along the fiber. The accumulated phase, along with controlled index modulation, generates the desired aperiodic reflection spectrum. Compared to a complex 'running-light' interferometry based inscription method, CPM offers the well known convenience and reproducibility of the standard phase mask inscription technique. The complexity of an aperiodic grating is encoded into the structure of the CPM. Complex filters fabricated with CPM can be used for suppressing the near infrared (NIR) OH- emission lines generated in the upper atmosphere, improving the performance of ground based telescopes.
△ Less
Submitted 20 April, 2020;
originally announced April 2020.
-
First demonstration of OH suppression in a high efficiency near-infrared spectrograph
Authors:
S. C. Ellis,
J. Bland-Hawthorn,
J. S. Lawrence,
A. J. Horton,
R. Content,
M. M. Roth,
N. Pai,
R. Zhelem,
S. Case,
E. Hernandez,
S. G. Leon-Saval,
R. Haynes,
S. S. Min,
D. Giannone,
K. Madhav,
A. Rahman,
C. Betters,
D. Haynes,
W. Couch,
L. J. Kewley,
R. McDermid,
L. Spitler,
R. G. Sharp,
S. Veilleux
Abstract:
Ground-based near-infrared astronomy is severely hampered by the forest of atmospheric emission lines resulting from the rovibrational decay of OH molecules in the upper atmosphere. The extreme brightness of these lines, as well as their spatial and temporal variability, makes accurate sky subtraction difficult. Selectively filtering these lines with OH suppression instruments has been a long stan…
▽ More
Ground-based near-infrared astronomy is severely hampered by the forest of atmospheric emission lines resulting from the rovibrational decay of OH molecules in the upper atmosphere. The extreme brightness of these lines, as well as their spatial and temporal variability, makes accurate sky subtraction difficult. Selectively filtering these lines with OH suppression instruments has been a long standing goal for near-infrared spectroscopy. We have shown previously the efficacy of fibre Bragg gratings combined with photonic lanterns for achieving OH suppression. Here we report on PRAXIS, a unique near-infrared spectrograph that is optimised for OH suppression with fibre Bragg gratings. We show for the first time that OH suppression (of any kind) is possible with high overall throughput (18 per cent end-to-end), and provide examples of the relative benefits of OH suppression.
△ Less
Submitted 12 January, 2020;
originally announced January 2020.
-
Astro2020: Astrophotonics White Paper
Authors:
Pradip Gatkine,
Sylvain Veilleux,
John Mather,
Christopher Betters,
Jonathan Bland-Hawthorn,
Julia Bryant,
S. Bradley Cenko,
Mario Dagenais,
Drake Deming,
Simon Ellis,
Matthew Greenhouse,
Andrew Harris,
Nemanja Jovanovic,
Steve Kuhlmann,
Alexander Kutyrev,
Sergio Leon-Saval,
Kalaga Madhav,
Samuel Moseley,
Barnaby Norris,
Bernard Rauscher,
Martin Roth,
Stuart Vogel
Abstract:
Astrophotonics is the application of versatile photonic technologies to channel, manipulate, and disperse guided light from one or more telescopes to achieve scientific objectives in astronomy in an efficient and cost-effective way. The developments and demands from the telecommunication industry have driven a major boost in photonic technology and vice versa in the last 40 years. The photonic pla…
▽ More
Astrophotonics is the application of versatile photonic technologies to channel, manipulate, and disperse guided light from one or more telescopes to achieve scientific objectives in astronomy in an efficient and cost-effective way. The developments and demands from the telecommunication industry have driven a major boost in photonic technology and vice versa in the last 40 years. The photonic platform of guided light in fibers and waveguides has opened the doors to next-generation instrumentation for both ground- and space-based telescopes in optical and near/mid-IR bands, particularly for the upcoming extremely large telescopes (ELTs). The large telescopes are pushing the limits of adaptive optics to reach close to a near-diffraction-limited performance. The photonic devices are ideally suited for capturing this AO-corrected light and enabling new and exciting science such as characterizing exoplanet atmospheres. The purpose of this white paper is to summarize the current landscape of astrophotonic devices and their scientific impact, highlight the key issues, and outline specific technological and organizational approaches to address these issues in the coming decade and thereby enable new discoveries as we embark on the era of extremely large telescopes.
△ Less
Submitted 12 July, 2019;
originally announced July 2019.
-
Aperiodic phase masks for inscribing complex multi-notch OH-emission filters for astronomy
Authors:
Kalaga Madhav,
Ziyang Zhang,
Martin M Roth
Abstract:
We demonstrate for the first time, a new type of aperiodic phase mask (APM) for fabricating multi-channel aperiodic fiber Bragg gratings. The mask is made of individual diffraction phase gratings with discrete unequal phase-steps incorporated at periodic locations. The diffraction at the discrete phase-steps in the phase mask produces corresponding half phase-steps at periodic locations along the…
▽ More
We demonstrate for the first time, a new type of aperiodic phase mask (APM) for fabricating multi-channel aperiodic fiber Bragg gratings. The mask is made of individual diffraction phase gratings with discrete unequal phase-steps incorporated at periodic locations. The diffraction at the discrete phase-steps in the phase mask produces corresponding half phase-steps at periodic locations along the fiber. The accumulated phase, along with index modulation, generates the desired multinotch reflection spectrum. Complex fiber Bragg grating filters fabricated using APM, in a standard phase mask based fabrication setup, can be used to simultaneously suppress multiple aperiodic OH emission wavelengths in near infrared (NIR) existing in upper atmosphere, and increase the sensitivity of ground based telescopes.
△ Less
Submitted 20 December, 2018;
originally announced December 2018.
