-
Simulation tools, first results and experimental status of the MURAVES experiment
Authors:
Andrea Giammanco,
Yanwen Hong,
Marwa Al Moussawi,
Fabio Ambrosino,
Antonio Anastasio,
Samip Basnet,
Lorenzo Bonechi,
Massimo Bongi,
Diletta Borselli,
Alan Bross,
Antonio Caputo,
Roberto Ciaranfi,
Luigi Cimmino,
Vitaliano Ciulli,
Raffaello D'Alessandro,
Mariaelena D'Errico,
Catalin Frosin,
Flora Giudicepietro,
Sandro Gonzi,
Giovanni Macedonio,
Vincenzo Masone,
Massimo Orazi,
Andrea Paccagnella,
Rosario Peluso,
Anna Pla-Dalmau
, et al. (7 additional authors not shown)
Abstract:
The MUon RAdiography of VESuvius (MURAVES) project aims at the study of Mt. Vesuvius, an active and hazardous volcano near Naples, Italy, with the use of muons freely and abundantly produced by cosmic rays. In particular, the MURAVES experiment intends to perform muographic imaging of the internal structure of the summit of Mt. Vesuvius. The challenging measurement of the rock density distribution…
▽ More
The MUon RAdiography of VESuvius (MURAVES) project aims at the study of Mt. Vesuvius, an active and hazardous volcano near Naples, Italy, with the use of muons freely and abundantly produced by cosmic rays. In particular, the MURAVES experiment intends to perform muographic imaging of the internal structure of the summit of Mt. Vesuvius. The challenging measurement of the rock density distribution in its summit by muography, in conjunction with data from other geophysical techniques, can help model possible eruption dynamics. The MURAVES apparatus consists of an array of three independent and identical muon trackers, with a total sensitive area of 3 square meters. In each tracker, a sequence of 4 XY tracking planes made of plastic scintillators is complemented by a 60 cm thick lead wall inserted between the two downstream planes to improve rejection of background from low energy muons. The apparatus is currently acquiring data. This paper presents preliminary results from the analysis of the first data samples acquired with trackers pointing towards Mt. Vesuvius, including the first relative measurement of the density projection of two flanks of the volcano at three different altitudes; we also present the workflow of the simulation chain of the MURAVES experiment and its ongoing developments.
△ Less
Submitted 19 June, 2024; v1 submitted 22 November, 2023;
originally announced November 2023.
-
On the seafloor horizontal displacement from cGPS and compass data in the Campi Flegrei caldera
Authors:
Tiziana Trombetti,
Carlo Burigana,
Prospero De Martino,
Sergio Guardato,
Giovanni Macedonio,
Giovanni Iannaccone,
Francesco Chierici
Abstract:
Seafloor deformation monitoring is now performed in the marine sector of the Campi Flegrei volcanic area. MEDUSA infrastructure consists of 4 buoys at depths of 40-96m equipped with cGPS receivers, accelerometers and magnetic compasses to monitor buoy status and a seafloor module with a bottom pressure recorder. We study the seafloor deformation in the caldera. Previously we show that cGPS onland…
▽ More
Seafloor deformation monitoring is now performed in the marine sector of the Campi Flegrei volcanic area. MEDUSA infrastructure consists of 4 buoys at depths of 40-96m equipped with cGPS receivers, accelerometers and magnetic compasses to monitor buoy status and a seafloor module with a bottom pressure recorder. We study the seafloor deformation in the caldera. Previously we show that cGPS onland network and MEDUSA timeseries for the years 2017-2020 are in agreement with the deformation predicted by a Mogi model describing the observed deformation of an active volcano. Only for buoy A data differ significantly from model, at 6.9sigma and 23.7sigma for the horizontal speed (v) and direction. We devised a new method to reconstruct the sea bottom displacement including cGPS and compass data. The method, applied to buoy A and validated also on C, uses compass data to correct cGPS positions accounting for pole inclination. Including systematic errors, the internal consistency, within 3sigma (2sigma) for the speed (angle), between the results derived for different maximum inclinations of the buoy pole up to 3.5deg shows that the method allows to significantly reduce the impact of the pole inclination which can alter the estimation. We find good convergence of the velocity and deformation angle for increasing values of the buoy pole inclination. We found v=3.521+-0.039(stat)+-0.352(syst)cm/yr and an angle -115.159+-0.670(stat)+-7.630(syst)deg. The relative impact of potential systematics (statistical) effects increases (decreases) with cutoff. Our analysis gives v consistent with Mogi at 5.2sigma(stat) or 0.5sigma(stat and syst), and a deformation angle consistent at 4.3sigma(stat) or at 0.3sigma. The module of the vectorial difference between v from the data and Mogi diminishes by a factor 7.65+-1.23(stat) or +-5.78(stat+syst) compared with previous work. Potential improvements are discussed.
△ Less
Submitted 25 May, 2023;
originally announced May 2023.
-
The MURAVES experiment: study of the Vesuvius Great Cone with Muon Radiography
Authors:
M. D'Errico,
F. Ambrosino,
A. Anastasio,
S. Basnet,
L. Bonechi,
M. Bongi,
A. Bross,
R. Ciaranfi,
L. Cimmino,
C. Ciulli,
R. D'Alessandro,
A. Giammanco,
F. Giudicepietro,
S. Gonzi,
R. Karnam,
G. Macedonio,
V. Masone,
N. Mori,
M. Moussawi,
M. Orazi,
G. Passeggio,
R. Peluso,
A. Pla-Dalmau,
C. Rendon,
A. Samalan
, et al. (6 additional authors not shown)
Abstract:
The MURAVES experiment aims at the muographic imaging of the internal structure of the summit of Mt. Vesuvius, exploiting muons produced by cosmic rays. Though presently quiescent, the volcano carries a dramatic hazard in its highly populated surroundings. The challenging measurement of the rock density distribution in its summit by muography, in conjunction with data from other geophysical techni…
▽ More
The MURAVES experiment aims at the muographic imaging of the internal structure of the summit of Mt. Vesuvius, exploiting muons produced by cosmic rays. Though presently quiescent, the volcano carries a dramatic hazard in its highly populated surroundings. The challenging measurement of the rock density distribution in its summit by muography, in conjunction with data from other geophysical techniques, can help the modeling of possible eruptive dynamics. The MURAVES apparatus consists of an array of three independent and identical muon trackers, with a total sensitive area of 3 square meters. In each tracker, a sequence of 4 XY tracking planes made of plastic scintillators is complemented by a 60 cm thick lead wall inserted between the two downstream planes to improve rejection of background from low energy muons. The apparatus is currently acquiring data. Preliminary results from the analysis of a first data sample are presented.
△ Less
Submitted 24 February, 2022;
originally announced February 2022.
-
The simulations chain of the MURAVES experiment
Authors:
M. Moussawi,
S. Basnet,
L. Bonechi,
L. Cimmino,
R. DÁlessandro,
M. DÉrrico,
A. Giammanco,
R. Karnam,
G. Macedonio,
C. Rendon,
A. Samalan,
G. Saracino,
M. Tytgat
Abstract:
The MUon RAdiography of VESuvius (MURAVES) project aims at the study of the summital cone of Mt. Vesuvius, an active and hazardous volcano near Naples, Italy. A detailed Monte Carlo simulation framework is necessary in order to investigate the effects of the experimental constraints and to perform comparisons with the actual observations. Our Monte Carlo setup combines a variety of Monte Carlo pro…
▽ More
The MUon RAdiography of VESuvius (MURAVES) project aims at the study of the summital cone of Mt. Vesuvius, an active and hazardous volcano near Naples, Italy. A detailed Monte Carlo simulation framework is necessary in order to investigate the effects of the experimental constraints and to perform comparisons with the actual observations. Our Monte Carlo setup combines a variety of Monte Carlo programs that address different aspects of cosmic muon simulation, from muon generation in the Earth's upper atmosphere to the response of the detector, including the interactions with the material of the volcano. We will elaborate on the rationale for our technical choices, including trade-off between speed and accuracy, and on the lessons learned, which are of general interest for similar use cases in muon radiography.
△ Less
Submitted 7 February, 2022;
originally announced February 2022.
-
End-to-end simulations of the MUon RAdiography of VESuvius experiment
Authors:
A. Samalan,
S. Basnet,
L. Bonechi,
L. Cimmino,
R. D. Alessandro,
M. D. Errico,
A. Giammanco,
R. Karnam,
G. Macedonio,
M. Moussawi,
C. Rendon,
G. Saracino,
M. Tytgat
Abstract:
The MUon RAdiography of VESuvius (MURAVES) project aims at the study of the summital cone of Mt. Vesuvius, an active volcano near Naples (Italy), by measuring its density profile through muon flux attenuation. Its data, combined with those from gravimetric and seismic measurement campaigns, will be used for better defining the volcanic plug at the bottom of the crater. We report on the development…
▽ More
The MUon RAdiography of VESuvius (MURAVES) project aims at the study of the summital cone of Mt. Vesuvius, an active volcano near Naples (Italy), by measuring its density profile through muon flux attenuation. Its data, combined with those from gravimetric and seismic measurement campaigns, will be used for better defining the volcanic plug at the bottom of the crater. We report on the development of an end-to-end simulation framework, in order to perform accurate investigations of the effects of the experimental constraints and to compare simulations, under various model hypotheses, with the actual observations. The detector simulation setup is developed using GEANT4 and a study of cosmic particle generators has been conducted to identify the most suitable one for our simulation framework. To mimic the real data, GEANT4 raw hits are converted to clusters through a simulated digitization: energy deposits are first summed per scintillator bar, and then converted to number of photoelectrons with a data-driven procedure. This is followed by the same clustering algorithm and same tracking code as in real data. We also report on the study of muon transport through rock using PUMAS and GEANT4. In this paper we elaborate on the rationale for our technical choices, including trade-off between speed and accuracy. The developments reported here are of general interest in muon radiography and can be applied in similar cases.
△ Less
Submitted 17 November, 2021; v1 submitted 29 September, 2021;
originally announced September 2021.
-
First application of the failure forecast method to the GPS horizontal displacement data collected in the Campi Flegrei caldera (Italy) in 2011-2020
Authors:
Andrea Bevilacqua,
Abani Patra,
E. Bruce Pitman,
Marcus Bursik,
Prospero De Martino,
Flora Giudicepietro,
Giovanni Macedonio,
Stefano Vitale,
Franco Flandoli,
Barry Voight,
Augusto Neri
Abstract:
Using the failure forecast method we describe a first assessment of failure time on present-day unrest signals at Campi Flegrei caldera (Italy) based on the horizontal deformation data collected in [2011, 2020] at eleven GPS stations.
Using the failure forecast method we describe a first assessment of failure time on present-day unrest signals at Campi Flegrei caldera (Italy) based on the horizontal deformation data collected in [2011, 2020] at eleven GPS stations.
△ Less
Submitted 6 July, 2020;
originally announced July 2020.
-
Numerical simulation of lava flows based on depth-averaged equations
Authors:
Antonio Costa,
Giovanni Macedonio
Abstract:
Risks and damages associated with lava flows propagation (for instance the most recent Etna eruptions) require a quantitative description of this phenomenon and a reliable forecasting of lava flow paths. Due to the high complexity of these processes, numerical solution of the complete conservation equations for real lava flows is often practically impossible. To overcome the computational diffic…
▽ More
Risks and damages associated with lava flows propagation (for instance the most recent Etna eruptions) require a quantitative description of this phenomenon and a reliable forecasting of lava flow paths. Due to the high complexity of these processes, numerical solution of the complete conservation equations for real lava flows is often practically impossible. To overcome the computational difficulties, simplified models are usually adopted, including 1-D models and cellular automata. In this work we propose a simplified 2D model based on the conservation equations for lava thickness and depth-averaged velocities and temperature which result in first order partial differential equations. The proposed approach represents a good compromise between the full 3-D description and the need to decrease the computational time. The method was satisfactorily applied to reproduce some analytical solutions and to simulate a real lava flow event occurred during the 1991-93 Etna eruption.
△ Less
Submitted 4 May, 2005; v1 submitted 7 April, 2005;
originally announced April 2005.
-
Viscous heating effects in fluids with temperature-dependent viscosity: triggering of secondary flows
Authors:
A. Costa,
G. Macedonio
Abstract:
Viscous heating can play an important role in the dynamics of fluids with strongly temperature-dependent viscosities because of the coupling between the energy and momentum equations. The heat generated by viscous friction produces a local temperature increase near the tube walls with a consequent decrease of the viscosity and a strong stratification in the viscosity profile. The problem of visc…
▽ More
Viscous heating can play an important role in the dynamics of fluids with strongly temperature-dependent viscosities because of the coupling between the energy and momentum equations. The heat generated by viscous friction produces a local temperature increase near the tube walls with a consequent decrease of the viscosity and a strong stratification in the viscosity profile. The problem of viscous heating in fluids was investigated and reviewed by Costa & Macedonio (2003) because of its important implications in the study of magma flows. Because of the strong coupling between viscosity and temperature, the temperature rise due to the viscous heating may trigger instabilities in the velocity field, which cannot be predicted by a simple isothermal Newtonian model. When viscous heating produces a pronounced peak in the temperature profile near the walls, a triggering of instabilities and a transition to secondary flows can occur because of the stratification in the viscosity profile. In this paper we focus on the thermal and mechanical effects caused by viscous heating. We will present the linear stability equations and we will show, as in certain regimes, these effects can trigger and sustain a particular class of secondary rotational flows which appear organised in coherent structures similar to roller vortices. This phenomenon can play a very important role in the dynamics of magma flows in conduits and lava flows in channels and, to our knowledge, it is the first time that it has been investigated by a direct numerical simulation.
△ Less
Submitted 3 May, 2005; v1 submitted 10 December, 2003;
originally announced December 2003.
-
Viscous heating in fluids with temperature-dependent viscosity: implications for magma flows
Authors:
A. Costa,
G. Macedonio
Abstract:
Viscous heating plays an important role in the dynamics of fluids with strongly temperature-dependent viscosity because of the coupling between the energy and momentum equations. The heat generated by viscous friction produces a local temperature increase near the tube walls with a consequent decrease of the viscosity which may dramatically change the temperature and velocity profiles. These pro…
▽ More
Viscous heating plays an important role in the dynamics of fluids with strongly temperature-dependent viscosity because of the coupling between the energy and momentum equations. The heat generated by viscous friction produces a local temperature increase near the tube walls with a consequent decrease of the viscosity which may dramatically change the temperature and velocity profiles. These processes are mainly controlled by the Peclét number, the Nahme number, the flow rate and the thermal boundary conditions. The problem of viscous heating in fluids was investigated in the past for its practical interest in the polymer industry, and was invoked to explain some rheological behaviours of silicate melts, but was not completely applied to study magma flows. In this paper we focus on the thermal and mechanical effects caused by viscous heating in tubes of finite lengths. We find that in magma flows at high Nahme number and typical flow rates, viscous heating is responsible for the evolution from Poiseuille flow, with a uniform temperature distribution at the inlet, to a plug flow with a hotter layer near the walls. When the temperature gradients induced by viscous heating are very pronounced, local instabilities may occur and the triggering of secondary flows is possible. For completeness, this paper also describes magma flow in infinitely long tubes both at steady state and in transient phase.
△ Less
Submitted 3 December, 2003; v1 submitted 28 February, 2003;
originally announced February 2003.
-
Nonlinear phenomena in fluids with temperature-dependent viscosity: an hysteresis model for magma flow in conduits
Authors:
Antonio Costa,
Giovanni Macedonio
Abstract:
Magma viscosity is strongly temperature-dependent. When hot magma flows in a conduit, heat is lost through the walls and the temperature decreases along the flow causing a viscosity increase. For particular values of the controlling parameters the steady-flow regime in a conduit shows two stable solutions belonging either to the slow or to the fast branch. As a consequence, this system may show…
▽ More
Magma viscosity is strongly temperature-dependent. When hot magma flows in a conduit, heat is lost through the walls and the temperature decreases along the flow causing a viscosity increase. For particular values of the controlling parameters the steady-flow regime in a conduit shows two stable solutions belonging either to the slow or to the fast branch. As a consequence, this system may show an hysteresis effect, and the transition between the two branches can occur quickly when certain critical points are reached. In this paper we describe a model to study the relation between the pressure at the inlet and the volumetric magma flow rate in a conduit. We apply this model to explain an hysteric jump observed during the dome growth at Soufrière Hills volcano (Montserrat), and described by Melnik and Sparks [1999] using a different model.
△ Less
Submitted 28 February, 2003;
originally announced February 2003.