Showing 1–41 of 41 results for author: Maccarrone, G

Enhancing the light yield of He:CF$_4$ based gaseous detector

Authors: F. D. Amaro, R. Antonietti, E. Baracchini, L. Benussi, S. Bianco, R. Campagnola, C. Capoccia, M. Caponero, D. S. Cardoso, L. G. M. de Carvalho, G. Cavoto, I. Abritta Costa, A. Croce, E. Dané, G. Dho, F. Di Giambattista, E. Di Marco, M. D'Astolfo, G. D'Imperio, D. Fiorina, F. Iacoangeli, Z. Islam, H. P. L. Jùnior, E. Kemp, G. Maccarrone , et al. (29 additional authors not shown)

Abstract: The CYGNO experiment aims to build a large ($\mathcal{O}(10)$ m$^3$) directional detector for rare event searches, such as nuclear recoils (NRs) induced by dark matter (DM), such as weakly interactive massive particles (WIMPs). The detector concept comprises a time projection chamber (TPC), filled with a He:CF$_4$ 60/40 scintillating gas mixture at room temperature and atmospheric pressure, equipp… ▽ More The CYGNO experiment aims to build a large ($\mathcal{O}(10)$ m$^3$) directional detector for rare event searches, such as nuclear recoils (NRs) induced by dark matter (DM), such as weakly interactive massive particles (WIMPs). The detector concept comprises a time projection chamber (TPC), filled with a He:CF$_4$ 60/40 scintillating gas mixture at room temperature and atmospheric pressure, equipped with an amplification stage made of a stack of three gas electron multipliers (GEMs) which are coupled to an optical readout. The latter consists in scientific CMOS (sCMOS) cameras and photomultipliers tubes (PMTs). The maximisation of the light yield of the amplification stage plays a major role in the determination of the energy threshold of the experiment. In this paper, we simulate the effect of the addition of a strong electric field below the last GEM plane on the GEM field structure and we experimentally test it by means of a 10$\times$10 cm$^2$ readout area prototype. The experimental measurements analyse stacks of different GEMs and helium concentrations in the gas mixture combined with this extra electric field, studying their performances in terms of light yield, energy resolution and intrinsic diffusion. It is found that the use of this additional electric field permits large light yield increases without degrading intrinsic characteristics of the amplification stage with respect to the regular use of GEMs. △ Less

Submitted 9 June, 2024; originally announced June 2024.

Charge Amplification in Low Pressure CF4:SF6:He Mixtures with a Multi-Mesh ThGEM for Directional Dark Matter Searches

Authors: F. D. Amaro, E. Baracchini, L. Benussi, S. Bianco, F. Borra, C. Capoccia, M. Caponero, D. S. Cardoso, G. Cavoto, I. A. Costa, T. Crane, E. Dane, M. DAstolfo, G. Dho, F. Di Giambattista, G. DImperio, E. Di Marco, J. M. F. Dos Santos, A. C. Ezeribe, D. Fiorina, F. Iacoangeli, H. P. Lima Junior, G. S. P. Lopes, G. Maccarrone, R. D. P. Mano , et al. (24 additional authors not shown)

Abstract: The CYGNO collaboration is develo** next generation directional Dark Matter (DM) detection experiments, using gaseous Time Projection Chambers (TPCs), as a robust method for identifying Weakly Interacting Massive Particles (WIMPs) below the Neutrino Fog. SF6 is potentially ideal for this since it provides a high fluorine content, enhancing sensitivity to spin-dependent interactions and, as a Neg… ▽ More The CYGNO collaboration is develo** next generation directional Dark Matter (DM) detection experiments, using gaseous Time Projection Chambers (TPCs), as a robust method for identifying Weakly Interacting Massive Particles (WIMPs) below the Neutrino Fog. SF6 is potentially ideal for this since it provides a high fluorine content, enhancing sensitivity to spin-dependent interactions and, as a Negative Ion Drift (NID) gas, reduces charge diffusion leading to improved positional resolution. CF4, although not a NID gas, has also been identified as a favourable gas target as it provides a scintillation signal which can be used for a complimentary light/charge readout approach. These gases can operate at low pressures to elongate Nuclear Recoil (NR) tracks and facilitate directional measurements. In principle, He could be added to low pressure SF6/CF4 without significant detriment to the length of 16S, 12C, and 19F recoils. This would improve the target mass, sensitivity to lower WIMP masses, and offer the possibility of atmospheric operation; potentially reducing the cost of a containment vessel. In this article, we present gas gain and energy resolution measurements, taken with a Multi-Mesh Thick Gaseous Electron Multiplier (MMThGEM), in low pressure SF6 and CF4:SF6 mixtures following the addition of He. We find that the CF4:SF6:He mixtures tested were able to produce gas gains on the order of 10^4 up to a total pressure of 100 Torr. These results demonstrate an order of magnitude improvement in charge amplification in NID gas mixtures with a He component. △ Less

Submitted 28 May, 2024; originally announced May 2024.

Comments: Corresponding Author: A.G. McLean

Nonlinear Behavior of Josephson Traveling Wave Parametric Amplifiers

Authors: Claudio Guarcello, Felix Ahrens, Guerino Avallone, Carlo Barone, Matteo Borghesi, Luca Callegaro, Giovanni Carapella, Anna Paola Caricato, Iacopo Carusotto, Alessandro Cian, Alessandro D'Elia, Daniele Di Gioacchino, Emanuele Enrico, Paolo Falferi, Luca Fasolo, Marco Faverzani, Elena Ferri, Giovanni Filatrella, Claudio Gatti, Andrea Giachero, Damiano Giubertoni, Veronica Granata, Angelo Leo, Danilo Labranca, Carlo Ligi , et al. (18 additional authors not shown)

Abstract: Recent advancements in quantum technologies and advanced detection experiments have underscored the pressing need for the detection of exceedingly weak signals within the microwave frequency spectrum. Addressing this challenge, the Josephson Traveling Wave Parametric Amplifier (JTWPA) has been proposed as a cryogenic front-end amplifier capable of approaching the quantum noise limit while providin… ▽ More Recent advancements in quantum technologies and advanced detection experiments have underscored the pressing need for the detection of exceedingly weak signals within the microwave frequency spectrum. Addressing this challenge, the Josephson Traveling Wave Parametric Amplifier (JTWPA) has been proposed as a cryogenic front-end amplifier capable of approaching the quantum noise limit while providing a relevant bandwidth. This research is centered on a comprehensive numerical investigation of the JTWPA, without resorting to simplifications regarding the nonlinearity of the essential components. Specifically, this study focuses on a thorough examination of the system, characterized by coupled nonlinear differential equations representing all components of the device. Proper input and output signals at the device's boundaries are considered. The analysis of the output signals undergoing the parametric amplification process involves a detailed exploration of phase-space dynamics and Fourier spectral analysis of the output voltage. This study is conducted while considering the parameters ruling the response of the device under pump and signal excitations. In addition to the expected signal amplification, the findings reveal that the nonlinear nature of the system can give rise to unforeseen phenomena, depending on the system's operational conditions, which include: the generation of pump tone harmonics, modulation of the signal gain, and incommensurate frequency generation-effects that are not easily accommodated by simplistic linearized approaches △ Less

Submitted 3 March, 2024; originally announced March 2024.

Comments: 5 pages, 4 figures, DARTWARS project - INFN (Italy)

Journal ref: IEEE TAS, 34 (3), 1, 1701105 (2024)

Search for Axion dark matter with the QUAX-LNF tunable haloscope

Authors: A. Rettaroli, D. Alesini, D. Babusci, C. Braggio, G. Carugno, D. D'Agostino, A. D'Elia, D. Di Gioacchino, R. Di Vora, P. Falferi, U. Gambardella, A. Gardikiotis, C. Gatti, G. Iannone, C. Ligi, A. Lombardi, G. Maccarrone, A. Ortolan, G. Ruoso, S. Tocci, G. Vidali

Abstract: We report the first experimental results obtained with the new haloscope of the QUAX experiment located at Laboratori Nazionali di Frascati of INFN (LNF). The haloscope is composed of a OFHC Cu resonant cavity cooled down to about 30 mK and immersed in a magnetic field of 8 T. The cavity frequency was varied in a 6 MHz range between 8.831496 and 8.83803 GHz. This corresponds to a previously unprob… ▽ More We report the first experimental results obtained with the new haloscope of the QUAX experiment located at Laboratori Nazionali di Frascati of INFN (LNF). The haloscope is composed of a OFHC Cu resonant cavity cooled down to about 30 mK and immersed in a magnetic field of 8 T. The cavity frequency was varied in a 6 MHz range between 8.831496 and 8.83803 GHz. This corresponds to a previously unprobed mass range between 36.52413 and 36.5511 $μ$eV. We don't observe any excess in the power spectrum and set limits on the axion-photon coupling in this mass range down to $g_{aγγ} < 0.861 \times 10^{-13}$ GeV$^{-1}$ with the confidence level set at $90\%$. △ Less

Submitted 15 May, 2024; v1 submitted 29 February, 2024; originally announced February 2024.

Comments: Submitted to Physical Review D (https://journals.aps.org/prd/)

Development of KI-TWPAs for the DARTWARS project

Authors: Felix Ahrens, Elena Ferri, Guerino Avallone, Carlo Barone, Matteo Borghesi, Luca Callegaro, Giovanni Carapella, Anna Paola Caricato, Iacopo Carusotto, Alessandro Cian, Alessandro D'Elia, Daniele Di Gioacchino, Emanuele Enrico, Paolo Falferi, Luca Fasolo, Marco Faverzani, Giovanni Filatrella, Claudio Gatti, Andrea Giachero, Damiano Giubertoni, Veronica Granata, Claudio Guarcello, Danilo Labranca, Angelo Leo, Carlo Ligi , et al. (18 additional authors not shown)

Abstract: Noise at the quantum limit over a broad bandwidth is a fundamental requirement for future cryogenic experiments for neutrino mass measurements, dark matter searches and Cosmic Microwave Background (CMB) measurements as well as for fast high-fidelity read-out of superconducting qubits. In the last years, Josephson Parametric Amplifiers (JPA) have demonstrated noise levels close to the quantum limit… ▽ More Noise at the quantum limit over a broad bandwidth is a fundamental requirement for future cryogenic experiments for neutrino mass measurements, dark matter searches and Cosmic Microwave Background (CMB) measurements as well as for fast high-fidelity read-out of superconducting qubits. In the last years, Josephson Parametric Amplifiers (JPA) have demonstrated noise levels close to the quantum limit, but due to their narrow bandwidth, only few detectors or qubits per line can be read out in parallel. An alternative and innovative solution is based on superconducting parametric amplification exploiting the travelling-wave concept. Within the DARTWARS (Detector Array Readout with Travelling Wave AmplifieRS) project, we develop Kinetic Inductance Travelling-Wave Parametric Amplifiers (KI-TWPAs) for low temperature detectors and qubit read-out. KI-TWPAs are typically operated in a threewave mixing (3WM) mode and are characterised by a high gain, a high saturation power, a large amplification bandwidth and nearly quantum limited noise performance. The goal of the DARTWARS project is to optimise the KI-TWPA design, explore new materials, and investigate alternative fabrication processes in order to enhance the overall performance of the amplifier. In this contribution we present the advancements made by the DARTWARS collaboration to produce a working prototype of a KI-TWPA, from the fabrication to the characterisation. △ Less

Submitted 19 February, 2024; originally announced February 2024.

Journal ref: IEEE Transactions on Applied Superconductivity, vol. 34, no. 3, pp. 1-5, May 2024, Art no. 1700605

Broadband parametric amplification in DARTWARS

Authors: Marco Faverzani, Pietro Campana, Rodolfo Carobene, Marco Gobbo, Felix Ahrens, Guerino Avallone, Carlo Barone, Matteo Borghesi, Silvia Capelli, Giovanni Carapella, Anna Paola Caricato, Luca Callegaro, Iacopo Carusotto, Andrea Celotto, Alessandro Cian, Alessandro D'Elia, Daniele Di Gioacchino, Emanuele Enrico, Paolo Falferi, Luca Fasolo, Elena Ferri, Giovanni Filatrella, Claudio Gatti, Damiano Giubertoni, Veronica Granata , et al. (24 additional authors not shown)

Abstract: Superconducting parametric amplifiers offer the capability to amplify feeble signals with extremely low levels of added noise, potentially reaching quantum-limited amplification. This characteristic makes them essential components in the realm of high-fidelity quantum computing and serves to propel advancements in the field of quantum sensing. In particular, Traveling-Wave Parametric Amplifiers (T… ▽ More Superconducting parametric amplifiers offer the capability to amplify feeble signals with extremely low levels of added noise, potentially reaching quantum-limited amplification. This characteristic makes them essential components in the realm of high-fidelity quantum computing and serves to propel advancements in the field of quantum sensing. In particular, Traveling-Wave Parametric Amplifiers (TWPAs) may be especially suitable for practical applications due to their multi-Gigahertz amplification bandwidth, a feature lacking in Josephson Parametric Amplifiers (JPAs), despite the latter being a more established technology. This paper presents recent developments of the DARTWARS (Detector Array Readout with Traveling Wave AmplifieRS) project, focusing on the latest prototypes of Kinetic Inductance TWPAs (KITWPAs). The project aims to develop a KITWPA capable of achieving $20\,$ dB of amplification. To enhance the production yield, the first prototypes were fabricated with half the length and expected gain of the final device. In this paper, we present the results of the characterization of one of the half-length prototypes. The measurements revealed an average amplification of approximately $9\,$dB across a $2\,$GHz bandwidth for a KITWPA spanning $17\,$mm in length. △ Less

Submitted 19 February, 2024; originally announced February 2024.

Characterization of a Transmon Qubit in a 3D Cavity for Quantum Machine Learning and Photon Counting

Authors: Alessandro D'Elia, Boulos Alfakes, Anas Alkhazaleh, Leonardo Banchi, Matteo Beretta, Stefano Carrazza, Fabio Chiarello, Daniele Di Gioacchino, Andrea Giachero, Felix Henrich, Alex Stephane Piedjou Komnang, Carlo Ligi, Giovanni Maccarrone, Massimo Macucci, Emanuele Palumbo, Andrea Pasquale, Luca Piersanti, Florent Ravaux, Alessio Rettaroli, Matteo Robbiati, Simone Tocci, Claudio Gatti

Abstract: In this paper we report the use of superconducting transmon qubit in a 3D cavity for quantum machine learning and photon counting applications. We first describe the realization and characterization of a transmon qubit coupled to a 3D resonator, providing a detailed description of the simulation framework and of the experimental measurement of important parameters, like the dispersive shift and th… ▽ More In this paper we report the use of superconducting transmon qubit in a 3D cavity for quantum machine learning and photon counting applications. We first describe the realization and characterization of a transmon qubit coupled to a 3D resonator, providing a detailed description of the simulation framework and of the experimental measurement of important parameters, like the dispersive shift and the qubit anharmonicity. We then report on a Quantum Machine Learning application implemented on the single-qubit device to fit the u-quark parton distribution function of the proton. In the final section of the manuscript we present a new microwave photon detection scheme based on two qubits coupled to the same 3D resonator. This could in principle decrease the dark count rate, favouring applications like axion dark matter searches. △ Less

Submitted 6 February, 2024; originally announced February 2024.

Comments: 22 pages, 10 figures, accepted in Applied Sciences, code available at https://qibo.science

Report number: TIF-UNIMI-2024-2

Design and simulation of a transmon qubit chip for Axion detection

Authors: Roberto Moretti, Hervè Atsè Corti, Danilo Labranca, Felix Ahrens, Guerino Avallone, Danilo Babusci, Leonardo Banchi, Carlo Barone, Matteo Mario Beretta, Matteo Borghesi, Bruno Buonomo, Enrico Calore, Giovanni Carapella, Fabio Chiarello, Alessandro Cian, Alessando Cidronali, Filippo Costa, Alessandro Cuccoli, Alessandro D'Elia, Daniele Di Gioacchino, Stefano Di Pascoli, Paolo Falferi, Marco Fanciulli, Marco Faverzani, Giulietto Felici , et al. (32 additional authors not shown)

Abstract: Quantum Sensing is a rapidly expanding research field that finds one of its applications in Fundamental Physics, as the search for Dark Matter. Devices based on superconducting qubits have already been successfully applied in detecting few-GHz single photons via Quantum Non-Demolition measurement (QND). This technique allows us to perform repeatable measurements, bringing remarkable sensitivity im… ▽ More Quantum Sensing is a rapidly expanding research field that finds one of its applications in Fundamental Physics, as the search for Dark Matter. Devices based on superconducting qubits have already been successfully applied in detecting few-GHz single photons via Quantum Non-Demolition measurement (QND). This technique allows us to perform repeatable measurements, bringing remarkable sensitivity improvements and dark count rate suppression in experiments based on high-precision microwave photon detection, such as for Axions and Dark Photons search. In this context, the INFN Qub-IT project goal is to realize an itinerant single-photon counter based on superconducting qubits that will exploit QND for enhancing Axion search experiments. In this study, we present Qub-IT's status towards the realization of its first superconducting qubit device, illustrating design and simulation procedures and the characterization of fabricated Coplanar Waveguide Resonators (CPWs) for readout. We match target qubit parameters and assess a few-percent level agreement between lumped and distributed element simulation models. We reach a maximum internal quality factor of 9.2x10^5 for -92 dBm on-chip readout power. △ Less

Submitted 25 January, 2024; v1 submitted 8 October, 2023; originally announced October 2023.

Journal ref: IEEE Transactions on Applied Superconductivity, 2024

The future search for low-frequency axions and new physics with the FLASH resonant cavity experiment at Frascati National Laboratories

Authors: David Alesini, Danilo Babusci, Paolo Beltrame, Fabio Bossi, Paolo Ciambrone, Alessandro D'Elia, Daniele Di Gioacchino, Giampiero Di Pirro, Babette Döbrich, Paolo Falferi, Claudio Gatti, Maurizio Giannotti, Paola Gianotti, Gianluca Lamanna, Carlo Ligi, Giovanni Maccarrone, Giovanni Mazzitelli, Alessandro Mirizzi, Michael Mueck, Enrico Nardi, Federico Nguyen, Alessio Rettaroli, Javad Rezvani, Francesco Enrico Teofilo, Simone Tocci , et al. (3 additional authors not shown)

Abstract: We present a proposal for a new experiment, the FINUDA magnet for Light Axion SearcH (FLASH), a large resonant-cavity haloscope in a high static magnetic field which is planned to probe new physics in the form of dark matter (DM) axions, scalar fields, chameleons, hidden photons, as well as high frequency gravitational waves (GWs). Concerning the QCD axion, FLASH will search for these particles as… ▽ More We present a proposal for a new experiment, the FINUDA magnet for Light Axion SearcH (FLASH), a large resonant-cavity haloscope in a high static magnetic field which is planned to probe new physics in the form of dark matter (DM) axions, scalar fields, chameleons, hidden photons, as well as high frequency gravitational waves (GWs). Concerning the QCD axion, FLASH will search for these particles as the DM in the mass range (0.49-1.49) ueV, thus filling the mass gap between the ranges covered by other planned searches. A dedicated Microstrip SQUID operating at ultra-cryogenic temperatures will amplify the signal. The frequency range accessible overlaps with the Very High Frequency (VHF) range of the radio wave spectrum and allows for a search in GWs in the frequency range (100-300) MHz. The experiment will make use of the cryogenic plant and magnet of the FINUDA experiment at INFN Frascati National Laboratories near Rome (Italy); the operations needed to restore the functionalities of the apparatus are currently underway. We present the setup of the experiment and the sensitivity forecasts for the detection of axions, scalar fields, chameleons, hidden photons, and GWs. △ Less

Submitted 1 September, 2023; originally announced September 2023.

Report number: CA21106; CA21136

Journal ref: Phys.Dark Univ. 42 (2023) 101370

LIME -- a gas TPC prototype for directional Dark Matter search for the CYGNO experiment

Authors: Fernando Domingues Amaro, Elisabetta Baracchini, Luigi Benussi, Stefano Bianco, Cesidio Capoccia, Michele Caponero, Danilo Santos Cardoso, Gianluca Cavoto, André Cortez, Igor Abritta Costa, Emiliano Dané, Giorgio Dho, Flaminia Di Giambattista, Emanuele Di Marco, Giulia D'Imperio, Francesco Iacoangeli, Herman Pessoa Lima Junior, Guilherme Sebastiao Pinheiro Lopes, Giovanni Maccarrone, Rui Daniel Passos Mano, Robert Renz Marcelo Gregorio, David José Gaspar Marques, Giovanni Mazzitelli, Alasdair Gregor McLean, Andrea Messina , et al. (22 additional authors not shown)

Abstract: The CYGNO experiment aims at the development of a large gaseous TPC with GEM-based amplification and an optical readout by means of PMTs and scientific CMOS cameras for 3D tracking down to O(keV) energies, for the directional detection of rare events such as low mass Dark Matter and solar neutrino interactions. The largest prototype built so far towards the realisation of the CYGNO experiment demo… ▽ More The CYGNO experiment aims at the development of a large gaseous TPC with GEM-based amplification and an optical readout by means of PMTs and scientific CMOS cameras for 3D tracking down to O(keV) energies, for the directional detection of rare events such as low mass Dark Matter and solar neutrino interactions. The largest prototype built so far towards the realisation of the CYGNO experiment demonstrator is the 50 L active volume LIME, with 4 PMTs and a single sCMOS imaging a 33$\times$33 cm\textsuperscript{2} area for 50 cm drift, that has been installed in underground Laboratori Nazionali del Gran Sasso in February 2022. We will illustrate LIME performances as evaluated overground in Laboratori Nazionali di Frascati by means of radioactive X-ray sources, and in particular the detector stability, energy response and energy resolution. We will discuss the MC simulation developed to reproduce the detector response and show the comparison with actual data. We will furthermore examine the background simulation worked out for LIME underground data taking and illustrate the foreseen expected measurement and results in terms of natural and materials intrinsic radioactivity characterisation and measurement of the LNGS underground natural neutron flux. The results that will be obtained by underground LIME installation will be paramount in the optimisation of the CYGNO demonstrator, since this is foreseen to be composed by multiple modules with the same LIME dimensions and characteristics. △ Less

Submitted 29 June, 2023; originally announced June 2023.

The CYGNO experiment, a directional detector for direct Dark Matter searches

Authors: F. D. Amaro, E. Baracchini, L. Benussi, S. Bianco, C. Capoccia, M. Caponero, D. S. Cardoso, G. Cavoto, A. Cortez, I. A. Costa, E. Dané, G. Dho, F. Di Giambattista, E. Di Marco, G. D'Imperio, F. Iacoangeli, H. P. L. Jùnior, G. S. P. Lopes, G. Maccarrone, R. D. P. Mano, R. R. M. Gregorio, D. J. G. Marques, G. Mazzitelli, A. G. McLean, A. Messina , et al. (22 additional authors not shown)

Abstract: The CYGNO project aims at the development of a high precision optical readout gaseous Tima Projection Chamber (TPC) for directional dark matter (DM) searches, to be hosted at Laboratori Nazionali del Gran Sasso (LNGS). CYGNO employs a He:CF$_4$ gas mixture at atmospheric pressure with a Gas Electron Multiplier (GEM) based amplification structure coupled to an optical readout comprised of sCMOS cam… ▽ More The CYGNO project aims at the development of a high precision optical readout gaseous Tima Projection Chamber (TPC) for directional dark matter (DM) searches, to be hosted at Laboratori Nazionali del Gran Sasso (LNGS). CYGNO employs a He:CF$_4$ gas mixture at atmospheric pressure with a Gas Electron Multiplier (GEM) based amplification structure coupled to an optical readout comprised of sCMOS cameras and photomultiplier tubes (PMTs). This experimental setup allows to achieve 3D tracking and background rejection down to O(1) keV energy, to boost sensitivity to low WIMP masses. The characteristics of the optical readout approach in terms of the light yield will be illustrated along with the particle identification properties. The project timeline foresees, in the next 2-3 years, the realisation and installation of a 0.4 m$^3$ TPC in the underground laboratories at LNGS to act as a demonstrator. Finally, the studies of the expected DM sensitivities of the CYGNO demonstrator will be presented. △ Less

Submitted 7 June, 2023; originally announced June 2023.

Search for galactic axions with a traveling wave parametric amplifier

Authors: R. Di Vora, A. Lombardi, A. Ortolan, R. Pengo, G. Ruoso, C. Braggio, G. Carugno, L. Taffarello, G. Cappelli, N. Crescini, M. Esposito, L. Planat, A. Ranadive, N. Roch, D. Alesini, D. Babusci, A. D'Elia, D. Di Gioacchino, C. Gatti, C. Ligi, G. Maccarrone, A. Rettaroli, S. Tocci, D. D'Agostino, U. Gambardella , et al. (2 additional authors not shown)

Abstract: A traveling wave parametric amplifier has been integrated in the haloscope of the QUAX experiment. A search for dark matter axions has been performed with a high Q dielectric cavity immersed in a 8 T magnetic field and read by a detection chain having a system noise temperature of about 2.1 K at the frequency of 10.353 GHz. Scanning has been conducted by varying the cavity frequency using sapphire… ▽ More A traveling wave parametric amplifier has been integrated in the haloscope of the QUAX experiment. A search for dark matter axions has been performed with a high Q dielectric cavity immersed in a 8 T magnetic field and read by a detection chain having a system noise temperature of about 2.1 K at the frequency of 10.353 GHz. Scanning has been conducted by varying the cavity frequency using sapphire rods immersed into the cavity. At multiple operating frequencies, the sensitivity of the instrument was at the level of viable axion models. △ Less

Submitted 15 April, 2023; originally announced April 2023.

Step** closer to pulsed single microwave photon detectors for axions search

Authors: A. D'Elia, A. Rettaroli, S. Tocci, D. Babusci, C. Barone, M. Beretta, B. Buonomo, F. Chiarello, N. Chikhi, D. Di Gioacchino, G. Felici, G. Filatrella, M. Fistul, L. G. Foggetta, C. Gatti, E. Il'ichev, C. Ligi, M. Lisitskiy, G. Maccarrone, F. Mattioli, G. Oelsner, S. Pagano, L. Piersanti, B. Ruggiero, G. Torrioli , et al. (1 additional authors not shown)

Abstract: Axions detection requires the ultimate sensitivity down to the single photon limit. In the microwave region this corresponds to energies in the yJ range. This extreme sensitivity has to be combined with an extremely low dark count rate, since the probability of axions conversion into microwave photons is supposed to be very low. To face this complicated task, we followed two promising approaches t… ▽ More Axions detection requires the ultimate sensitivity down to the single photon limit. In the microwave region this corresponds to energies in the yJ range. This extreme sensitivity has to be combined with an extremely low dark count rate, since the probability of axions conversion into microwave photons is supposed to be very low. To face this complicated task, we followed two promising approaches that both rely on the use of superconducting devices based on the Josephson effect. The first one is to use a single Josephson junction (JJ) as a switching detector (i.e. exploiting the superconducting to normal state transition in presence of microwave photons). We designed a device composed of a coplanar waveguide terminated on a current biased Josephson junction. We tested its efficiency to pulsed (pulse duration 10 ns) microwave signals, since this configuration is closer to an actual axions search experiment. We show how our device is able to reach detection capability of the order of 10 photons with frequency 8 GHz. The second approach is based on an intrinsically quantum device formed by two resonators coupled only via a superconducting qubit network (SQN). This approach relies on quantum nondemolition measurements of the resonator photons. We show that injecting RF power into the resonator, the frequency position of the resonant drop in the transmission coefficient (S21) can be modulated up to 4 MHz. We anticipate that, once optimized, both the devices have the potential to reach single photon sensitivity. △ Less

Submitted 15 February, 2023; originally announced February 2023.

Search for galactic axions with a high-Q dielectric cavity

Authors: D. Alesini, D. Babusci, C. Braggio, G. Carugno, N. Crescini, D. DAgostino, A. D'Elia, D. Di Gioacchino, R. Di Vora, P. Falferi, U. Gambardella, C. Gatti, G. Iannone, C. Ligi, A. Lombardi, G. Maccarrone, A. Ortolan, R. Pengo, A. Rettaroli, G. Ruoso, L. Taffarello, S. Tocci

Abstract: A haloscope of the QUAX--$aγ$ experiment, composed of an high-Q resonant cavity immersed in a 8 T magnet and cooled to $\sim 4.5$~K is operated to search for galactic axion with mass $m_a\simeq42.8~μ\text{eV}$. The design of the cavity with hollow dielectric cylinders concentrically inserted in a OFHC Cu cavity, allowed us to maintain a loaded quality-factor Q $\sim 300000$ during the measurements… ▽ More A haloscope of the QUAX--$aγ$ experiment, composed of an high-Q resonant cavity immersed in a 8 T magnet and cooled to $\sim 4.5$~K is operated to search for galactic axion with mass $m_a\simeq42.8~μ\text{eV}$. The design of the cavity with hollow dielectric cylinders concentrically inserted in a OFHC Cu cavity, allowed us to maintain a loaded quality-factor Q $\sim 300000$ during the measurements in presence of magnetic field. Through the cavity tuning mechanism it was possible to modulate the resonance frequency of the haloscope in the region $10.35337-10.35345$~GHz and thus acquire different dataset at different resonance frequencies. Acquiring each dataset for about 50 minutes, combining them and correcting for the axion's signal estimation-efficiency we set a limit on the axion-photon coupling $g_{aγγ}< 0.731\times10^{-13}$ GeV$^{-1}$ with the confidence level set at $90\%$. △ Less

Submitted 26 August, 2022; originally announced August 2022.

Progress in the development of a KITWPA for the DARTWARS project

Authors: M. Borghesi, C. Barone, S. Capelli, G. Carapella, A. P. Caricato, I. Carusotto, A. Cian, D. Di Gioacchino, E. Enrico, P. Falferi, L. Fasolo, M. Faverzani, E. Ferri, G. Filatrella, C. Gatti, A. Giachero, D. Giubertoni, V. Granata, A. Greco, C. Guarcello, D. Labranca, A. Leo, C. Ligi, G. Maccarrone, F. Mantegazzini , et al. (16 additional authors not shown)

Abstract: DARTWARS (Detector Array Readout with Traveling Wave AmplifieRS) is a three years project that aims to develop high-performing innovative Traveling Wave Parametric Amplifiers (TWPAs) for low temperature detectors and qubit readout (C-band). The practical development follows two different promising approaches, one based on the Josephson junctions (TWJPA) and the other one based on the kinetic induc… ▽ More DARTWARS (Detector Array Readout with Traveling Wave AmplifieRS) is a three years project that aims to develop high-performing innovative Traveling Wave Parametric Amplifiers (TWPAs) for low temperature detectors and qubit readout (C-band). The practical development follows two different promising approaches, one based on the Josephson junctions (TWJPA) and the other one based on the kinetic inductance of a high-resistivity superconductor (KITWPA). This paper presents the advancements made by the DARTWARS collaboration to produce a first working prototype of a KITWPA. △ Less

Submitted 27 October, 2022; v1 submitted 22 August, 2022; originally announced August 2022.

Comments: 3 pages, 4 figures. Proceeding of Pisa15th Meeting conference

Ultra low noise readout with travelling wave parametric amplifiers: the DARTWARS project

Authors: A. Rettaroli, C. Barone, M. Borghesi, S. Capelli, G. Carapella, A. P. Caricato, I. Carusotto, A. Cian, D. Di Gioacchino, E. Enrico, P. Falferi, L. Fasolo, M. Faverzani, E. Ferri, G. Filatrella, C. Gatti, A. Giachero, D. Giubertoni, V. Granata, A. Greco, C. Guarcello, D. Labranca, A. Leo, C. Ligi, G. Maccarrone , et al. (16 additional authors not shown)

Abstract: The DARTWARS project has the goal of develo** high-performing innovative travelling wave parametric amplifiers with high gain, large bandwidth, high saturation power, and nearly quantum-limited noise. The target frequency region for its applications is 5 - 10 GHz, with an expected noise temperature of about 600 mK. The development follows two different approaches, one based on Josephson junction… ▽ More The DARTWARS project has the goal of develo** high-performing innovative travelling wave parametric amplifiers with high gain, large bandwidth, high saturation power, and nearly quantum-limited noise. The target frequency region for its applications is 5 - 10 GHz, with an expected noise temperature of about 600 mK. The development follows two different approaches, one based on Josephson junctions and one based on kinetic inductance of superconductors. This contribution mainly focuses on the Josephson travelling wave parametric amplifier, presenting its design, preliminary measurements and the test of homogeneity of arrays of Josephson junctions. △ Less

Submitted 26 July, 2022; originally announced July 2022.

Comments: 4 pages, 5 figures. Proceeding of Pisa15th Meeting conference. arXiv admin note: text overlap with arXiv:2111.03409

Recoil imaging for directional detection of dark matter, neutrinos, and physics beyond the Standard Model

Authors: C. A. J. O'Hare, D. Loomba, K. Altenmüller, H. Álvarez-Pol, F. D. Amaro, H. M. Araújo, D. Aristizabal Sierra, J. Asaadi, D. Attié, S. Aune, C. Awe, Y. Ayyad, E. Baracchini, P. Barbeau, J. B. R. Battat, N. F. Bell, B. Biasuzzi, L. J. Bignell, C. Boehm, I. Bolognino, F. M. Brunbauer, M. Caamaño, C. Cabo, D. Caratelli, J. M. Carmona , et al. (142 additional authors not shown)

Abstract: Recoil imaging entails the detection of spatially resolved ionization tracks generated by particle interactions. This is a highly sought-after capability in many classes of detector, with broad applications across particle and astroparticle physics. However, at low energies, where ionization signatures are small in size, recoil imaging only seems to be a practical goal for micro-pattern gas detect… ▽ More Recoil imaging entails the detection of spatially resolved ionization tracks generated by particle interactions. This is a highly sought-after capability in many classes of detector, with broad applications across particle and astroparticle physics. However, at low energies, where ionization signatures are small in size, recoil imaging only seems to be a practical goal for micro-pattern gas detectors. This white paper outlines the physics case for recoil imaging, and puts forward a decadal plan to advance towards the directional detection of low-energy recoils with sensitivity and resolution close to fundamental performance limits. The science case covered includes: the discovery of dark matter into the neutrino fog, directional detection of sub-MeV solar neutrinos, the precision study of coherent-elastic neutrino-nucleus scattering, the detection of solar axions, the measurement of the Migdal effect, X-ray polarimetry, and several other applied physics goals. We also outline the R&D programs necessary to test concepts that are crucial to advance detector performance towards their fundamental limit: single primary electron sensitivity with full 3D spatial resolution at the $\sim$100 micron-scale. These advancements include: the use of negative ion drift, electron counting with high-definition electronic readout, time projection chambers with optical readout, and the possibility for nuclear recoil tracking in high-density gases such as argon. We also discuss the readout and electronics systems needed to scale-up such detectors to the ton-scale and beyond. △ Less

Submitted 17 July, 2022; v1 submitted 11 March, 2022; originally announced March 2022.

Comments: 77 pages, 20 figures. Submitted to the Proceedings of the US Community Study on the Future of Particle Physics (Snowmass 2021)

The CYGNO Experiment

Authors: Fernando Domingues Amaro, Elisabetta Baracchini, Luigi Benussi, Stefano Bianco, Cesidio Capoccia, Michele Caponero, Danilo Santos Cardoso, Gianluca Cavoto, André Cortez, Igor Abritta Costa, Rita Joanna da Cruz Roque, Emiliano Dané, Giorgio Dho, Flaminia Di Giambattista, Emanuele Di Marco, Giovanni Grilli di Cortona, Giulia D'Imperio, Francesco Iacoangeli, Herman Pessoa Lima Júnior, Guilherme Sebastiao Pinheiro Lopes, Amaro da Silva Lopes Júnior, Giovanni Maccarrone, Rui Daniel Passos Mano, Michela Marafini, Robert Renz Marcelo Gregorio , et al. (25 additional authors not shown)

Abstract: The search for a novel technology able to detect and reconstruct nuclear and electron recoil events with the energy of a few keV has become more and more important now that large regions of high-mass dark matter (DM) candidates have been excluded. Moreover, a detector sensitive to incoming particle direction will be crucial in the case of DM discovery to open the possibility of studying its proper… ▽ More The search for a novel technology able to detect and reconstruct nuclear and electron recoil events with the energy of a few keV has become more and more important now that large regions of high-mass dark matter (DM) candidates have been excluded. Moreover, a detector sensitive to incoming particle direction will be crucial in the case of DM discovery to open the possibility of studying its properties. Gaseous time projection chambers (TPC) with optical readout are very promising detectors combining the detailed event information provided by the TPC technique with the high sensitivity and granularity of latest-generation scientific light sensors. The CYGNO experiment (a CYGNus module with Optical readout) aims to exploit the optical readout approach of multiple-GEM structures in large volume TPCs for the study of rare events as interactions of low-mass DM or solar neutrinos. The combined use of high-granularity sCMOS cameras and fast light sensors allows the reconstruction of the 3D direction of the tracks, offering good energy resolution and very high sensitivity in the few keV energy range, together with a very good particle identification useful for distinguishing nuclear recoils from electronic recoils. This experiment is part of the CYGNUS proto-collaboration, which aims at constructing a network of underground observatories for directional DM search. A one cubic meter demonstrator is expected to be built in 2022/23 aiming at a larger scale apparatus (30 m$^3$--100 m$^3$) at a later stage. △ Less

Submitted 11 February, 2022; originally announced February 2022.

Journal ref: published on Instruments 2022, 6(1), 6

A high-Q microwave dielectric resonator for axion dark matter haloscopes

Authors: R. Di Vora, D. Alesini, C. Braggio, G. Carugno, N. Crescini, D. D Agostino, D. Di Gioacchino, P. Falferi, U. Gambardella, C. Gatti, G. Iannone, C. Ligi, A. Lombardi, G. Maccarrone, A. Ortolan, R. Pengo, A. Rettaroli, G. Ruoso, L. Taffarello, S. Tocci

Abstract: The frequency band 1-15 GHz provides exciting prospects for resonant axion haloscopes as indicated by cosmological and astrophysical arguments. Among the challenges currently addressed to reach the required sensitivity, the development of high quality factor cavities that tolerate multi-Tesla fields plays a central role. We report a 3D resonator based on a right circular copper cavity with hollo… ▽ More The frequency band 1-15 GHz provides exciting prospects for resonant axion haloscopes as indicated by cosmological and astrophysical arguments. Among the challenges currently addressed to reach the required sensitivity, the development of high quality factor cavities that tolerate multi-Tesla fields plays a central role. We report a 3D resonator based on a right circular copper cavity with hollow cylinders that confine higher order modes around the cylinder axis. Its effective volume at 10.3\,GHz is $3.4 \cdot 10^{-2}$ liters, and under an 8\,T-field we measured an internal quality factor of more than 9 millions. These parameters demonstrate the potential of this unique resonator to probe galactic dark matter axion at remarkable scan rates of 15\,MHz/day when the cavity is readout by a quantum-limited receiver. △ Less

Submitted 11 January, 2022; originally announced January 2022.

Detector Array Readout with Traveling Wave Amplifiers

Authors: A. Giachero, C. Barone, M. Borghesi, G. Carapella, A. P. Caricato, I. Carusotto, W. Chang, A. Cian, D. Di Gioacchino, E. Enrico, P. Falferi, L. Fasolo, M. Faverzani, E. Ferri, G. Filatrella, C. Gatti, D. Giubertoni, A. Greco, C. Kutlu, A. Leo, C. Ligi, G. Maccarrone, B. Margesin, G. Maruccio, A. Matlashov , et al. (13 additional authors not shown)

Abstract: Noise at the quantum limit over a large bandwidth is a fundamental requirement for future applications operating at millikelvin temperatures, such as the neutrino mass measurement, the next-generation x-ray observatory, the CMB measurement, the dark matter and axion detection, and the rapid high-fidelity readout of superconducting qubits. The read out sensitivity of arrays of microcalorimeter dete… ▽ More Noise at the quantum limit over a large bandwidth is a fundamental requirement for future applications operating at millikelvin temperatures, such as the neutrino mass measurement, the next-generation x-ray observatory, the CMB measurement, the dark matter and axion detection, and the rapid high-fidelity readout of superconducting qubits. The read out sensitivity of arrays of microcalorimeter detectors, resonant axion-detectors, and qubits, is currently limited by the noise temperature and bandwidth of the cryogenic amplifiers. The DARTWARS (Detector Array Readout with Traveling Wave AmplifieRS) project has the goal of develo** high-performing innovative traveling wave parametric amplifiers (TWPAs) with a high gain, a high saturation power, and a quantum-limited or nearly quantum-limited noise. The practical development follows two different promising approaches, one based on the Josephson junctions and the other one based on the kinetic inductance of a high-resistivity superconductor. In this contribution we present the aims of the project, the adopted design solutions and preliminary results from simulations and measurements. △ Less

Submitted 2 November, 2021; originally announced November 2021.

Bimodal Approach for Noise Figures of Merit Evaluation in Quantum-Limited Josephson Traveling Wave Parametric Amplifiers

Authors: L. Fasolo, C. Barone, M. Borghesi, G. Carapella, A. P. Caricato, I. Carusotto, W. Chung, A. Cian, D. Di Gioacchino, E. Enrico, P. Falferi, M. Faverzani, E. Ferri, G. Filatrella, C. Gatti, A. Giachero, D. Giubertoni, A. Greco, C. Kutlu, A. Leo, C. Ligi, P. Livreri, G. Maccarrone, B. Margesin, G. Maruccio , et al. (15 additional authors not shown)

Abstract: The advent of ultra-low noise microwave amplifiers revolutionized several research fields demanding quantum-limited technologies. Exploiting a theoretical bimodal description of a linear phase-preserving amplifier, in this contribution we analyze some of the intrinsic properties of a model architecture (i.e., an rf-SQUID based Josephson Traveling Wave Parametric Amplifier) in terms of amplificatio… ▽ More The advent of ultra-low noise microwave amplifiers revolutionized several research fields demanding quantum-limited technologies. Exploiting a theoretical bimodal description of a linear phase-preserving amplifier, in this contribution we analyze some of the intrinsic properties of a model architecture (i.e., an rf-SQUID based Josephson Traveling Wave Parametric Amplifier) in terms of amplification and noise generation for key case study input states (Fock and coherents). Furthermore, we present an analysis of the output signals generated by the parametric amplification mechanism when thermal noise fluctuations feed the device. △ Less

Submitted 29 December, 2021; v1 submitted 30 September, 2021; originally announced September 2021.

Comments: 5 pages, 6 figures

Development of a Josephson junction based single photon microwave detector for axion detection experiments

Authors: D Alesini, D Babusci, C Barone, B Buonomo, M M Beretta, L Bianchini, G Castellano, F Chiarello, D Di Gioacchino, P Falferi, G Felici, G Filatrella, L G Foggetta, A Gallo, C Gatti, F Giazotto, G Lamanna, F Ligabue, N Ligato, C Ligi, G Maccarrone, B Margesin, F Mattioli, E Monticone, L Oberto , et al. (8 additional authors not shown)

Abstract: Josephson junctions, in appropriate configurations, can be excellent candidates for detection of single photons in the microwave frequency band. Such possibility has been recently addressed in the framework of galactic axion detection. Here are reported recent developments in the modelling and simulation of dynamic behaviour of a Josephson junction single microwave photon detector. For a Josephson… ▽ More Josephson junctions, in appropriate configurations, can be excellent candidates for detection of single photons in the microwave frequency band. Such possibility has been recently addressed in the framework of galactic axion detection. Here are reported recent developments in the modelling and simulation of dynamic behaviour of a Josephson junction single microwave photon detector. For a Josephson junction to be enough sensitive, small critical currents and operating temperatures of the order of ten of mK are necessary. Thermal and quantum tunnelling out of the zero-voltage state can also mask the detection process. Axion detection would require dark count rates in the order of 0.001 Hz. It is, therefore, is of paramount importance to identify proper device fabrication parameters and junction operation point. △ Less

Submitted 2 July, 2021; originally announced July 2021.

Comments: 7 pages, 9 figures

Journal ref: J. Phys.: Conf. Ser. 1559 012020 (2020)

Status of the SIMP Project: Toward the Single Microwave Photon Detection

Authors: David Alesini, Danilo Babusci, Carlo Barone, Bruno Buonomo, Matteo Mario Beretta, Lorenzo Bianchini, Gabriella Castellano, Fabio Chiarello, Daniele Di Gioacchino, Paolo Falferi, Giulietto Felici, Giovanni Filatrella, Luca Gennaro Foggetta, Alessandro Gallo, Claudio Gatti, Francesco Giazotto, Gianluca Lamanna, Franco Ligabue, Nadia Ligato, Carlo Ligi, Giovanni Maccarrone, Benno Margesin, Francesco Mattioli, Eugenio Monticone, Luca Oberto , et al. (8 additional authors not shown)

Abstract: The Italian institute for nuclear physics (INFN) has financed the SIMP project (2019-2021) in order to strengthen its skills and technologies in the field of meV detectors with the ultimate aim of develo** a single microwave photon detector. This goal will be pursued by improving the sensitivity and the dark count rate of two types of photodetectors: current biased Josephson Junction (JJ) for th… ▽ More The Italian institute for nuclear physics (INFN) has financed the SIMP project (2019-2021) in order to strengthen its skills and technologies in the field of meV detectors with the ultimate aim of develo** a single microwave photon detector. This goal will be pursued by improving the sensitivity and the dark count rate of two types of photodetectors: current biased Josephson Junction (JJ) for the frequency range 10-50 GHz and Transition Edge Sensor (TES) for the frequency range 30-100 GHz. Preliminary results on materials and devices characterization are presented. △ Less

Submitted 1 July, 2021; originally announced July 2021.

Comments: 7 pages, 4 figures

Journal ref: Journal of Low Temperature Physics (2020) 199:348-354

Search for invisible axion dark matter of mass m$_a=43~μ$eV with the QUAX--$aγ$ experiment

Authors: D. Alesini, C. Braggio, G. Carugno, N. Crescini, D. D'Agostino, D. Di Gioacchino, R. Di Vora, P. Falferi, U. Gambardella, C. Gatti, G. Iannone, C. Ligi, A. Lombardi, G. Maccarrone, A. Ortolan, R. Pengo, A. Rettaroli, G. Ruoso, L. Taffarello, S. Tocci

Abstract: A haloscope of the QUAX--$aγ$ experiment composed of an oxygen-free high thermal conductivity-Cu cavity inside an 8.1 T magnet and cooled to $\sim200$ mK is put in operation for the search of galactic axion with mass $m_a\simeq43~μ\text{eV}$. The power emitted by the resonant cavity is amplified with a Josephson parametric amplifier whose noise fluctuations are at the standard quantum limit. With… ▽ More A haloscope of the QUAX--$aγ$ experiment composed of an oxygen-free high thermal conductivity-Cu cavity inside an 8.1 T magnet and cooled to $\sim200$ mK is put in operation for the search of galactic axion with mass $m_a\simeq43~μ\text{eV}$. The power emitted by the resonant cavity is amplified with a Josephson parametric amplifier whose noise fluctuations are at the standard quantum limit. With the data collected in about 1 h at the cavity frequency $ν_c=10.40176$ GHz, the experiment reaches the sensitivity necessary for the detection of galactic QCD-axion, setting the $90\%$ confidence level limit to the axion-photon coupling $g_{aγγ}<0.639\times10^{-13}$ GeV$^{-1}$. △ Less

Submitted 26 May, 2021; v1 submitted 17 December, 2020; originally announced December 2020.

Comments: 7 pages, 6 figures. Analysis method changed. The result is almost left unchanged. Consequently, text has been revised in the Analysis section. Added references. Added equations (2), (4), (5)

Journal ref: Phys. Rev. D 103, 102004 (2021)

CYGNO: a gaseous TPC with optical readout for dark matter directional search

Authors: E. Baracchini, L. Benussi, S. Bianco, C. Capoccia, M. Caponero, G. Cavoto, A. Cortez, I. A. Costa, E. Di Marco, G. D'Imperio, G. Dho, F. Iacoangeli, G. Maccarrone, M. Marafini, G. Mazzitelli, A. Messina, R. A. Nobrega, A. Orlandi, E. Paoletti, L. Passamonti, F. Petrucci, D. Piccolo, D. Pierluigi, D. Pinci, F. Renga , et al. (4 additional authors not shown)

Abstract: The CYGNO project has the goal to use a gaseous TPC with optical readout to detect dark matter and solar neutrinos with low energy threshold and directionality. The CYGNO demonstrator will consist of 1 m 3 volume filled with He:CF 4 gas mixture at atmospheric pressure. Optical readout with high granularity CMOS sensors, combined with fast light detectors, will provide a detailed reconstruction of… ▽ More The CYGNO project has the goal to use a gaseous TPC with optical readout to detect dark matter and solar neutrinos with low energy threshold and directionality. The CYGNO demonstrator will consist of 1 m 3 volume filled with He:CF 4 gas mixture at atmospheric pressure. Optical readout with high granularity CMOS sensors, combined with fast light detectors, will provide a detailed reconstruction of the event topology. This will allow to discriminate the nuclear recoil signal from the background, mainly represented by low energy electron recoils induced by radioactivity. Thanks to the high reconstruction efficiency, CYGNO will be sensitive to low mass dark matter, and will have the potential to overcome the neutrino floor, that ultimately limits non-directional dark matter searches. △ Less

Submitted 24 July, 2020; originally announced July 2020.

Journal ref: Journal of Instrumentation, Volume 15, July 2020

Identification of low energy nuclear recoils in a gas TPC with optical readout

Authors: Elisabetta Baracchini, Luigi Benussi, Stefano Bianco, Cesidio Capoccia, Michele Arturo Caponero, Gianluca Cavoto, Andre Cortez, Igor Abritta Costa, Emanuele Di Marco, Giulia D'Imperio, Giorgio Dho, Fabrizio Iacoangeli, Giovanni Maccarrone, Michela Marafini, Giovanni Mazzitelli, Andrea Messina, Rafael Antunes Nobrega, Aldo Orlandi, Emiliano Paoletti, Luciano Passamonti, Fabrizio Petrucci, Davide Piccolo, Daniele Pierluigi, Davide Pinci, Francesco Renga , et al. (5 additional authors not shown)

Abstract: The search for a novel technology able to detect and reconstruct nuclear recoil events in the keV energy range has become more and more important as long as vast regions of high mass WIMP-like Dark Matter candidate have been excluded. Gaseous Time Projection Chambers (TPC) with optical readout are very promising candidate combining the complete event information provided by the TPC technique to th… ▽ More The search for a novel technology able to detect and reconstruct nuclear recoil events in the keV energy range has become more and more important as long as vast regions of high mass WIMP-like Dark Matter candidate have been excluded. Gaseous Time Projection Chambers (TPC) with optical readout are very promising candidate combining the complete event information provided by the TPC technique to the high sensitivity and granularity of last generation scientific light sensors. A TPC with an amplification at the anode obtained with Gas Electron Multipliers (GEM) was tested at the Laboratori Nazionali di Frascati. Photons and neutrons from radioactive sources were employed to induce recoiling nuclei and electrons with kinetic energy in the range [1-100] keV. A He-CF4 (60/40) gas mixture was used at atmospheric pressure and the light produced during the multiplication in the GEM channels was acquired by a high position resolution and low noise scientific CMOS camera and a photomultiplier. A multi-stage pattern recognition algorithm based on an advanced clustering technique is presented here. A number of cluster shape observables are used to identify nuclear recoils induced by neutrons originated from a AmBe source against X-ray 55Fe photo-electrons. An efficiency of 18% to detect nuclear recoils with an energy of about 6 keV is reached obtaining at the same time a 96% 55Fe photo-electrons suppression. This makes this optically readout gas TPC a very promising candidate for future investigations of ultra-rare events as directional direct Dark Matter searches. △ Less

Submitted 27 October, 2021; v1 submitted 24 July, 2020; originally announced July 2020.

Report number: LEMON-20-001

Journal ref: Meas. Sci. and Tech. 2020

A density-based clustering algorithm for the CYGNO data analysis

Authors: E. Baracchini, L. Benussi, S. Bianco, C. Capoccia, M. Caponero, G. Cavoto, A. Cortez, I. A. Costa, E. Di Marco, G. D'Imperio, G. Dho, F. Iacoangeli, G. Maccarrone, M. Marafini, G. Mazzitelli, A. Messina, R. A. Nobrega, A. Orlandi, E. Paoletti, L. Passamonti, F. Petrucci, D. Piccolo, D. Pierluigi, D. Pinci, F. Renga , et al. (4 additional authors not shown)

Abstract: Time Projection Chambers (TPCs) working in combination with Gas Electron Multipliers (GEMs) produce a very sensitive detector capable of observing low energy events. This is achieved by capturing photons generated during the GEM electron multiplication process by means of a high-resolution camera. The CYGNO experiment has recently developed a TPC Triple GEM detector coupled to a low noise and high… ▽ More Time Projection Chambers (TPCs) working in combination with Gas Electron Multipliers (GEMs) produce a very sensitive detector capable of observing low energy events. This is achieved by capturing photons generated during the GEM electron multiplication process by means of a high-resolution camera. The CYGNO experiment has recently developed a TPC Triple GEM detector coupled to a low noise and high spatial resolution CMOS sensor. For the image analysis, an algorithm based on an adapted version of the well-known DBSCAN was implemented, called iDBSCAN. In this paper a description of the iDBSCAN algorithm is given, including test and validation of its parameters, and a comparison with DBSCAN itself and a widely used algorithm known as Nearest Neighbor Clustering (NNC). The results show that the adapted version of DBSCAN is capable of providing full signal detection efficiency and very good energy resolution while improving the detector background rejection. △ Less

Submitted 28 September, 2020; v1 submitted 3 July, 2020; originally announced July 2020.

Journal ref: JINST 15 (2020) no.12, T12003

Stability and detection performance of a GEM-based Optical Readout TPC with He/CF$_4$ gas mixtures

Authors: E. Baracchini, L. Benussi, S. Bianco, C. Capoccia, M. Caponero, G. Cavoto, A. Cortez, I. A. Costa, E. Di Marco, G. D'Imperio, G. Dho, F. Iacoangeli, G. Maccarrone, M. Marafini, G. Mazzitelli, A. Messina, R. A. Nobrega, A. Orlandi, E. Paoletti, L. Passamonti, F. Petrucci, D. Piccolo, D. Pierluigi, D. Pinci, F. Renga , et al. (4 additional authors not shown)

Abstract: The performance and long term stability of an optically readout Time Projection Chamber with an electron amplification structure based on three Gas Electron Multipliers was studied. He/CF$_4$ based gas mixtures were used in two different proportions (60/40 and 70/30) in a CYGNO prototype with 7 litres sensitive volume. With electrical configurations providing very similar electron gains, an almost… ▽ More The performance and long term stability of an optically readout Time Projection Chamber with an electron amplification structure based on three Gas Electron Multipliers was studied. He/CF$_4$ based gas mixtures were used in two different proportions (60/40 and 70/30) in a CYGNO prototype with 7 litres sensitive volume. With electrical configurations providing very similar electron gains, an almost full detection efficiency in the whole detector volume was found with both mixtures, while a light yield about 20\% larger for the 60/40 was found. The electrostatic stability was tested by monitoring voltages and currents during 25 days. The detector worked in very stable and safe condition for the whole period. In the presence of less CF$_4$, a larger probability of unstable events was clearly detected. △ Less

Submitted 17 August, 2020; v1 submitted 1 July, 2020; originally announced July 2020.

Journal ref: JINST 15 (2020) no.10, P10001

Performance of an optically read out time projection chamber with ultra-relativistic electrons

Authors: V. C. Antochi, E. Baracchini, L. Benussi, S. Bianco, C. Capoccia, M. Caponero, G. Cavoto, A. Cortez, I. A. Costa, E. Di Marco, G. D'Imperio, G. Dho, F. Iacoangeli, G Maccarrone, M. Marafini, G. Mazzitelli, A. Messina, R. A. N'obrega, A. Orlandi, E. Paoletti, L. Passamonti, F. Petrucci, D. Piccolo, D. Pierluigi, D. Pinci , et al. (6 additional authors not shown)

Abstract: The Time Projection Chamber (TPC) is an ideal candidate to finely study the charged particle ionization in a gaseous medium. Large volumes TPCs can be read out with a suitable number of channels offering a complete 3D reconstruction of an ultra-relativistic charged particle track, that is the sequence of its energy releases in the TPC gas volume. Moreover, He-based TPCs are very promising to study… ▽ More The Time Projection Chamber (TPC) is an ideal candidate to finely study the charged particle ionization in a gaseous medium. Large volumes TPCs can be read out with a suitable number of channels offering a complete 3D reconstruction of an ultra-relativistic charged particle track, that is the sequence of its energy releases in the TPC gas volume. Moreover, He-based TPCs are very promising to study keV energy particles as nuclear recoils, opening the possibility for directional searches of Dark Matter (DM) and the study of Solar Neutrinos (SN). In this paper, we report the analysis of the data acquired with a small TPC prototype (named LEMOn) built by the CYGNO collaboration that was exposed to a beam of 450 MeV electrons at the Beam Test Facility of National Laboratories of Frascati. LEMOn is operated with a He-CF4 mixture at atmospheric pressure and is based on a Gas Electron Multipliers amplification stage that produces visible light collected by a sub-millimeter position resolution scientific CMOS camera. This type of readout - in conjunction with a fast light detection - allows a 3D reconstruction of the electrons' tracks. The electrons are leaving a trail of segments of ionizations corresponding to a few keV energy releases each. Their study leads to predict a keV energy threshold and 1-10 mm longitudinal and 0.1-0.3 mm transverse position resolution for nuclear recoils, very promising for the application of optically readout TPC to DM searches and SN measurements. △ Less

Submitted 10 March, 2021; v1 submitted 25 May, 2020; originally announced May 2020.

Report number: INFN-20-06/LNF

Journal ref: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2021

First evidence of luminescence in a He/CF$_4$ gas mixture induced by non-ionizing electrons

Authors: E. Baracchini, L. Benussi, S. Bianco, C. Capoccia, M. Caponero, G. Cavoto, A. Cortez, I. A. Costa, E. Di Marco, G. D'Imperio, G. Dho, F. Iacoangeli, G. Maccarrone, M. Marafini, G. Mazzitelli, A. Messina, A. Orlandi, E. Paoletti, L. Passamonti, F. Petrucci, D. Piccolo, D. Pierluigi, D. Pinci, F. Renga, F. Rosatelli , et al. (3 additional authors not shown)

Abstract: Optical readout of Gas Electron Multipliers (GEM) provides very interesting performances and has been proposed for different applications in particle physics. In particular, thanks to its good efficiency in the keV energy range, it is being developed for low-energy and rare event studies, such as Dark Matter search. So far, the optical approach exploits the light produced during the avalanche proc… ▽ More Optical readout of Gas Electron Multipliers (GEM) provides very interesting performances and has been proposed for different applications in particle physics. In particular, thanks to its good efficiency in the keV energy range, it is being developed for low-energy and rare event studies, such as Dark Matter search. So far, the optical approach exploits the light produced during the avalanche processes in GEM channels. Further luminescence in the gas can be induced by electrons accelerated by a suitable electric field. The CYGNO collaboration studied this process with a combined use of a triple-GEM structure and a grid in an He/CF$_4$ (60/40) gas mixture at atmospheric pressure. Results reported in this paper allow to conclude that with an electric field of about 11~kV/cm a photon production mean free path of about 1.0~cm was found. △ Less

Submitted 2 July, 2020; v1 submitted 22 April, 2020; originally announced April 2020.

Journal ref: JINST 15, no.08, P08018 (2020)

Realization of a high quality factor resonator with hollow dielectric cylinders for axion searches

Authors: D. Alesini, C. Braggio, G. Carugno, N. Crescini, D. D' Agostino, D. Di Gioacchino, R. Di Vora, P. Falferi, U. Gambardella, C. Gatti, G. Iannone, C. Ligi, A. Lombardi, G. Maccarrone, A. Ortolan, R. Pengo, C. Pira, A. Rettaroli, G. Ruoso, L. Taffarello, S. Tocci

Abstract: The realization and characterization of a high quality factor resonator composed of two hollow-dielectric cylinders with its pseudo-TM$_{030}$ mode resonating at 10.9 GHz frequency is discussed. The quality factor was measured at the temperatures 300 K and 4 K obtaining $\mbox{Q}_{300\mbox{K}}=(150,000\pm 2,000)$ and $\mbox{Q}_{4\mbox{K}}=(720,000\pm 10,000)$respectively, the latter corresponding… ▽ More The realization and characterization of a high quality factor resonator composed of two hollow-dielectric cylinders with its pseudo-TM$_{030}$ mode resonating at 10.9 GHz frequency is discussed. The quality factor was measured at the temperatures 300 K and 4 K obtaining $\mbox{Q}_{300\mbox{K}}=(150,000\pm 2,000)$ and $\mbox{Q}_{4\mbox{K}}=(720,000\pm 10,000)$respectively, the latter corresponding to a gain of one order of magnitude with respect to a traditional copper cylindrical-cavity with the corresponding TM$_{010}$ mode resonating at the same frequency. The implications to dark-matter axion-searches with cavity experiments are discussed showing that the gain in quality factor is not spoiled by a reduced geometrical coupling $C_{030}$ of the cavity mode to the axion field. This reduction effect is estimated to be at most 20%. Numerical simulations show that frequency tuning of several hundreds MHz is feasible. △ Less

Submitted 28 September, 2020; v1 submitted 6 April, 2020; originally announced April 2020.

High quality factor photonic cavity for dark matter axion searches

Authors: D. Alesini, C. Braggio, G. Carugno, N. Crescini, D. D'Agostino, D. Di Gioacchino, R. Di Vora, P. Falferi, U. Gambardella, C. Gatti, G. Iannone, C. Ligi, A. Lombardi, G. Maccarrone, A. Ortolan, R. Pengo, C. Pira, A. Rettaroli, G. Ruoso, L. Taffarello, S. Tocci

Abstract: Searches for dark matter axion involve the use of microwave resonant cavities operating in a strong magnetic field. Detector sensitivity is directly related to the cavity quality factor, which is limited, however, by the presence of the external magnetic field. In this paper we present a cavity of novel design whose quality factor is not affected by a magnetic field. It is based on a photonic stru… ▽ More Searches for dark matter axion involve the use of microwave resonant cavities operating in a strong magnetic field. Detector sensitivity is directly related to the cavity quality factor, which is limited, however, by the presence of the external magnetic field. In this paper we present a cavity of novel design whose quality factor is not affected by a magnetic field. It is based on a photonic structure by the use of sapphire rods. The quality factor at cryogenic temperature is in excess of $5 \times 10^5$ for a selected mode. △ Less

Submitted 5 February, 2020; originally announced February 2020.

Comments: 6 pages, 7 figures

Journal ref: Review of Scientific Instruments 91, 094701 (2020)

KLASH Conceptual Design Report

Authors: D. Alesini, D. Babusci, P. Beltrame S. J., F. Björkeroth, F. Bossi, P. Ciambrone, G. Delle Monache, D. Di Gioacchino, P. Falferi, A. Gallo, C. Gatti, A. Ghigo, M. Giannotti, G. Lamanna, C. Ligi, G. Maccarrone, A. Mirizzi, D. Montanino, D. Moricciani, A. Mostacci, M. Mück, E. Nardi, F. Nguyen, L. Pellegrino, A. Rettaroli , et al. (4 additional authors not shown)

Abstract: The last decade witnessed an increasing interest in axions and axion-like particles with many theoretical works published and many new experimental proposals that started a real race towards their discovery. This paper is the Conceptual Design Report of the KLASH (KLoe magnet for Axion SearcH) experiment at the Laboratori Nazionali di Frascati (LNF). The idea of this experiment has been stimulated… ▽ More The last decade witnessed an increasing interest in axions and axion-like particles with many theoretical works published and many new experimental proposals that started a real race towards their discovery. This paper is the Conceptual Design Report of the KLASH (KLoe magnet for Axion SearcH) experiment at the Laboratori Nazionali di Frascati (LNF). The idea of this experiment has been stimulated by the availability of the large volume superconducting magnet, with a moderate magnetic field of 0.6 T, used in the KLOE detector at the DAFNE collider. The main conclusion we draw from this report is the possibility to build and put in operation at LNF in 2-3 years a large haloscope with the sensitivity to KSVZ axions in the low mass range between 0.2 and 1 $μ$eV, complementary to that of other experiments. Timeline and cost are competitive with respect to other proposals in the same mass region thanks to the availability of most of the infrastructure, in particular the superconducting magnet and the cryogenics plant. △ Less

Submitted 6 November, 2019; originally announced November 2019.

Report number: INFN-19-18/LNF

CYGNO: Triple-GEM Optical Readout for Directional Dark Matter Search

Authors: I. Abritta Costa, E. Baracchini, R. Bedogni, F. Bellini, L. Benussi, S. Bianco, M. Caponero, G. Cavoto, E. Di Marco, G. D'Imperio, G. Maccarrone, M. Marafini, G. Mazzitelli, A. Messina, F. Petrucci, D. Piccolo, D. Pinci, F. Renga, G. Saviano, S. Tomassini

Abstract: CYGNO is a project realising a cubic meter demonstrator to study the scalability of the performance of the optical approach for the readout of large-volume, GEM-equipped TPC. This is part of the CYGNUS proto-collaboration which aims at constructing a network of underground observatories for directional Dark Matter search. The combined use of high-granularity sCMOS and fast sensors for reading out… ▽ More CYGNO is a project realising a cubic meter demonstrator to study the scalability of the performance of the optical approach for the readout of large-volume, GEM-equipped TPC. This is part of the CYGNUS proto-collaboration which aims at constructing a network of underground observatories for directional Dark Matter search. The combined use of high-granularity sCMOS and fast sensors for reading out the light produced in GEM channels during the multiplication processes was shown to allow on one hand to reconstruct 3D direction of the tracks, offering accurate energy measurements and sensitivity to the source directionality and, on the other hand, a high particle identification capability very useful to distinguish nuclear recoils. Results of the performed R&D and future steps toward a 30-100 cubic meter experiment will be presented. △ Less

Submitted 21 October, 2019; v1 submitted 16 October, 2019; originally announced October 2019.

Comments: 6th International Conference on Micro Pattern Gaseous Detectors, MPGD19

Performance of Optically Readout GEM-based TPC with a 55Fe source

Authors: I. Abritta Costa, E. Baracchini, F. Bellini, L. Benussi, S. Bianco, G. Cavoto, E. Di Marco, G. Maccarrone, M. Marafini, G. Mazzitelli, A. Messina, D. Piccolo, D. Pinci, F. Renga, F. Rosatelli, S. Tomassini

Abstract: Optical readout of large Time Projection Chambers (TPCs) with multiple Gas Electron Multipliers (GEMs) amplification stages has shown to provide very interesting performances for high energy particle tracking. Proposed applications for low-energy and rare event studies, such as Dark Matter search, ask for demanding performance in the keV energy range. The performance of such a readout was studied… ▽ More Optical readout of large Time Projection Chambers (TPCs) with multiple Gas Electron Multipliers (GEMs) amplification stages has shown to provide very interesting performances for high energy particle tracking. Proposed applications for low-energy and rare event studies, such as Dark Matter search, ask for demanding performance in the keV energy range. The performance of such a readout was studied in details as a function of the electric field configuration and GEM gain by using a $^{55}$Fe source within a 7 litre sensitive volume detector developed as a part of the R\&D for the CYGNUS project. Results reported in this paper show that the low noise level of the sensor allows to operate with a 2~keV threshold while kee** a rate of fake-events lesser than 10 per year. In this configuration, a detection efficiency well above 95\% along with an energy resolution ($σ$) of 18\% is obtained for the 5.9 keV photons, demonstrating the very promising capabilities of this technique. △ Less

Submitted 4 June, 2019; v1 submitted 10 May, 2019; originally announced May 2019.

Speedup of adiabatic multiqubit state-transfer by ultrastrong coupling of matter and radiation

Authors: M. Stramacchia, A. Ridolfo, G. Benenti, E. Paladino, F. M. D. Pellegrino, G. D. Maccarrone, G. Falci

Abstract: Ultrastrongly coupled quantum hardware may increase the speed of quantum state processing in distributed architectures, allowing to approach fault-tolerant threshold. We show that circuit QED architectures in the ultrastrong coupling regime, which has been recently demonstrated with superconductors, may show substantial speedup for a class of adiabatic protocols resilient to the main source of err… ▽ More Ultrastrongly coupled quantum hardware may increase the speed of quantum state processing in distributed architectures, allowing to approach fault-tolerant threshold. We show that circuit QED architectures in the ultrastrong coupling regime, which has been recently demonstrated with superconductors, may show substantial speedup for a class of adiabatic protocols resilient to the main source of errors, namely the interplay of dynamical Casimir effect and cavity losses. △ Less

Submitted 8 April, 2019; originally announced April 2019.

Comments: 2 figures

CYGNO: a CYGNUs Collaboration 1 m^3 Module with Optical Readout for Directional Dark Matter Search

Authors: E. Baracchini, R. Bedogni, F. Bellini, L. Benussi, S. Bianco, L. Bignell, M. Caponero, G. Cavoto, E. Di Marco, C. Eldridge, A. Ezeribe, R. Gargana, T. Gamble, R. Gregorio, G. Lane, D. Loomba, W. Lynch, G. Maccarrone, M. Marafini, G. Mazzitelli, A. Messina, A. Mills, K. Miuchi, F. Petrucci, D. Piccolo , et al. (8 additional authors not shown)

Abstract: The design of the project named CYGNO is presented. CYGNO is a new proposal supported by INFN, the Italian National Institute for Nuclear Physics, within CYGNUs proto-collaboration (CYGNUS-TPC) that aims to realize a distributed observatory in underground laboratories for directional Dark Matter (DM) search and the identification of the coherent neutrino scattering (CNS) from the Sun. CYGNO is one… ▽ More The design of the project named CYGNO is presented. CYGNO is a new proposal supported by INFN, the Italian National Institute for Nuclear Physics, within CYGNUs proto-collaboration (CYGNUS-TPC) that aims to realize a distributed observatory in underground laboratories for directional Dark Matter (DM) search and the identification of the coherent neutrino scattering (CNS) from the Sun. CYGNO is one of the first prototypes in the road map to 100-1000 m^3 of CYGNUs and will be located at the National Laboratory of Gran Sasso (LNGS), in Italy, aiming to make significant advances in the technology of single phase gas-only time projection chambers (TPC) for the application to the detection of rare scattering events. In particular it will focus on a read-out technique based on Micro Pattern Gas Detector (MPGD) amplification of the ionization and on the visible light collection with a sub-mm position resolution sCMOS (scientific COMS) camera. This type of readout - in conjunction with a fast light detection - will allow on one hand to reconstruct 3D direction of the tracks, offering accurate sensitivity to the source directionality and, on the other hand, a high particle identification capability very useful to distinguish nuclear recoils. △ Less

Submitted 24 September, 2019; v1 submitted 14 January, 2019; originally announced January 2019.

Report number: INFN-19/2/LNF

Journal ref: Conference Record of 2018 IEEE NSS/MIC/RTSD

Construction techniques and performances of a full-size prototype Micromegas chamber for the ATLAS muon spectrometer upgrade

Authors: T. Alexopoulos, M. Alviggi, M. Antonelli, F. Anulli, C. Arcangeletti, P. Bagnaia, A. Baroncelli, M. Beretta, C. Bini, J. Bortfeldt, D. Calabrò, V. Canale, G. Capradossi, G. Carducci, A. Caserio, C. Cassese, S. Cerioni, G. Ciapetti, V. D' Amico, B. De Fazio, M. Del Gaudio, C. Di Donato, R. Di Nardo, D. D' Uffizi, E. Farina , et al. (54 additional authors not shown)

Abstract: A full-size prototype of a Micromegas precision tracking chamber for the upgrade of the ATLAS detector at the LHC Collider has been built between October 2015 and April 2016. This paper describes in detail the procedures used in constructing the single modules of the chamber in various INFN laboratories and the final assembly at the Laboratori Nazionali di Frascati (LNF). Results of the chamber ex… ▽ More A full-size prototype of a Micromegas precision tracking chamber for the upgrade of the ATLAS detector at the LHC Collider has been built between October 2015 and April 2016. This paper describes in detail the procedures used in constructing the single modules of the chamber in various INFN laboratories and the final assembly at the Laboratori Nazionali di Frascati (LNF). Results of the chamber exposure to the CERN SPS/H8 beam line in June 2016 are also presented. The performances achieved in the construction and the results of the test beam are compared with the requirements, which are imposed by the severe environment during the data-taking of the LHC foreseen for the next years. △ Less

Submitted 11 September, 2018; v1 submitted 29 August, 2018; originally announced August 2018.

Comments: Contact editors: G. Mancini, A. Kourkoumeli-Charalampidi

Photon pair production by STIRAP in ultrastrongly coupled matter-radiation systems

Authors: A. Ridolfo, G. Falci, F. M. D. Pellegrino, G. D. Maccarrone, E. Paladino

Abstract: Artificial atoms (AA) offer the possibility to design physical systems implementing new regimes of ultrastrong coupling (USC) between radiation and matter, where previously unexplored non-perturbative physics emerges. While experiments so far provided only spectroscopic evidence of USC, we propose the dynamical detection of virtual photon pairs in the dressed eigenstates, which is a "smoking gun"… ▽ More Artificial atoms (AA) offer the possibility to design physical systems implementing new regimes of ultrastrong coupling (USC) between radiation and matter, where previously unexplored non-perturbative physics emerges. While experiments so far provided only spectroscopic evidence of USC, we propose the dynamical detection of virtual photon pairs in the dressed eigenstates, which is a "smoking gun" of the very existence of USC in nature. We show how to coherently amplify this channel to reach 100% efficiency by operating advanced control similar to stimulated Raman adiabatic passage (STIRAP). △ Less

Submitted 20 January, 2019; v1 submitted 18 May, 2018; originally announced May 2018.

Comments: 3 pages, 2 figures

Journal ref: Eur. Phys. J. Spec. Top. (2019) 227: 2183

Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics

Authors: The ATLAS Collaboration, G. Aad, E. Abat, B. Abbott, J. Abdallah, A. A. Abdelalim, A. Abdesselam, O. Abdinov, B. Abi, M. Abolins, H. Abramowicz, B. S. Acharya, D. L. Adams, T. N. Addy, C. Adorisio, P. Adragna, T. Adye, J. A. Aguilar-Saavedra, M. Aharrouche, S. P. Ahlen, F. Ahles, A. Ahmad, H. Ahmed, G. Aielli, T. Akdogan , et al. (2587 additional authors not shown)

Abstract: A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on… ▽ More A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on simulations of the detector and physics processes, with particular emphasis given to the data expected from the first years of operation of the LHC at CERN. △ Less

Submitted 14 August, 2009; v1 submitted 28 December, 2008; originally announced January 2009.

Spin and Electron Structure

Authors: Matej Pavsic, Erasmo Recami, Waldyr A. Rodrigues Jr., G. Daniele Maccarrone, Fabio Raciti, Giovanni Salesi

Abstract: The recent literature shows a renewed interest, with various independent approaches, in the classical models for spin. Considering the possible interest of those results, at least for the electron case, we purpose in this paper to explore their physical and mathematical meaning, by the natural and powerful language of Clifford algebras (which, incidentally, will allow us to unify those different… ▽ More The recent literature shows a renewed interest, with various independent approaches, in the classical models for spin. Considering the possible interest of those results, at least for the electron case, we purpose in this paper to explore their physical and mathematical meaning, by the natural and powerful language of Clifford algebras (which, incidentally, will allow us to unify those different approaches). In such models, the ordinary electron is in general associated to the mean motion of a point--like "constituent" Q, whose trajectory is a cylindrical helix. We find, in particular, that the object Q obeys a new, non-linear Dirac--like equation, such that --when averaging over an internal cycle (which corresponds to a linearization)-- it transforms into the ordinary Dirac equation (valid, of course, for the electron as a whole). △ Less

Submitted 18 March, 2002; originally announced March 2002.

Comments: LaTeX; 14 pages

Journal ref: Phys.Lett. B318 (1993) 481