-
Sun-as-a-star Study of an X-class Solar Flare with Spectroscopic Observations of CHASE
Authors:
Y. L. Ma,
Q. H. Lao,
X. Cheng,
B. T. Wang,
Z. H. Zhao,
S. H. Rao,
C. Li,
M. D. Ding
Abstract:
Sun-as-a-star spectroscopic characteristics of solar flares can be used as a benchmark for the detection and analyses of stellar flares. Here, we study the Sun-as-a-star properties of an X1.0 solar flare using high-resolution spectroscopic data obtained by the Chinese $\mathrm{H} α$ Solar Explorer (CHASE). A noise reduction algorithm based on discrete Fourier transformation is first employed to en…
▽ More
Sun-as-a-star spectroscopic characteristics of solar flares can be used as a benchmark for the detection and analyses of stellar flares. Here, we study the Sun-as-a-star properties of an X1.0 solar flare using high-resolution spectroscopic data obtained by the Chinese $\mathrm{H} α$ Solar Explorer (CHASE). A noise reduction algorithm based on discrete Fourier transformation is first employed to enhance the signal-to-noise ratio of the space-integral $\mathrm{H} α$ spectrum with a focus on its typical characteristics. For the flare of interest, we find that the average $\mathrm{H} α$ profile displays a strong emission at the line center and an obvious line broadening. It also presents a clear red asymmetry, corresponding to a redshift velocity of around $50 \ \mathrm{km \ s^{-1}}$ that slightly decreases with time, consistent with previous results. Furthermore, we study how the size of the space-integral region affects the characteristics of the flare Sun-as-a-star $\mathrm{H} α$ profile. It is found that although the redshift velocity calculated from the $\mathrm{H} α$ profile remains unchanged, the detectability of the characteristics weakens as the space-integral region becomes large. An upper limit for the size of the target region where the red asymmetry is detectable is estimated. It is also found that the intensity in $\mathrm{H} α$ profiles, measured by the equivalent widths of the spectra, are significantly underestimated if the $\mathrm{H} α$ spectra are further averaged in the time domain.
△ Less
Submitted 13 March, 2024;
originally announced March 2024.
-
Complementary astrometry of Cassini Imaging Science Subsystem Images of Phoebe
Authors:
Q. F. Zhang,
W. H. Qin,
Y. L. Ma,
V. Lainey,
N. J. Cooper,
N. Rambaux,
Y. Li,
W. H. Zhu
Abstract:
Phoebe is the only major satellite of Saturn with a retrograde orbit. The Cassini Imaging Science Subsystem (ISS) took a lot of Phoebe images between 2004 and 2017, but only a selection of them has been reduced. In this paper, we reduced the remaining ISS images of Phoebe. In the reduction, the Gaia EDR3 catalogue was used to provide the reference stars' positions, and the modified moment was used…
▽ More
Phoebe is the only major satellite of Saturn with a retrograde orbit. The Cassini Imaging Science Subsystem (ISS) took a lot of Phoebe images between 2004 and 2017, but only a selection of them has been reduced. In this paper, we reduced the remaining ISS images of Phoebe. In the reduction, the Gaia EDR3 catalogue was used to provide the reference stars' positions, and the modified moment was used to measure the centre of image stars and Phoebe. Finally, a total of 834 ISS images of Phoebe have been reduced successfully. Compared with the JPL ephemeris SAT375, Phoebe's positions are consistent. The average residuals in the right ascension and declination are 0.08" and $-0.05$", and the standard deviations of the residuals are about 0.2". In terms of residuals in linear units, the means in the right ascension and declination are about 5 km and $-2$ km, respectively; The standard deviations are about 11 km. Compared with the JPL ephemeris SAT427 and IMCCE ephemeris PH20, our measurements show a strong bias and a large dispersion.
△ Less
Submitted 22 August, 2022;
originally announced August 2022.
-
Dynamics Reflect Gapless Edge Modes for Topological Superconductor
Authors:
X. L. Zhao,
M. Li,
T. H. Qiu,
L. B. Chen,
Y. L. Ma,
H. Y. Ma,
X. X. Yi
Abstract:
We focus on the dynamical feature for a $p$-wave superconductor model in different parameter regions in terms of the appearance of gapless edge modes in reel geometry. Firstly, we show the parameter region with gapless edge modes versus a parameter and quasi-momentum. The parameter diagram can be reflected by the expectations of Pauli matrices in global manners. In another view, the dynamical feat…
▽ More
We focus on the dynamical feature for a $p$-wave superconductor model in different parameter regions in terms of the appearance of gapless edge modes in reel geometry. Firstly, we show the parameter region with gapless edge modes versus a parameter and quasi-momentum. The parameter diagram can be reflected by the expectations of Pauli matrices in global manners. In another view, the dynamical feature of the excitation behave differently in the parameter regions with topological gapless edge modes and not. And the cusps of dynamical return rate vanish as the parameter pass the boundary in the parameter region slowly enough. It is found that the dynamics in the parameter region with gapless edge modes behaves differently to that without edge modes and related mostly to the eigenenergy gap between the pre-and post-quench eigenstates. The cusps of the dynamical return rate behave robustly against the noise in the lattice until localization behavior dominates. This work benefits detecting topological edge modes by dynamical manners.
△ Less
Submitted 18 May, 2022; v1 submitted 2 December, 2020;
originally announced December 2020.
-
Error analysis in suppression of unwanted qubit interactions for a parametric gate in a tunable superconducting circuit
Authors:
X. Y. Han,
T. Q. Cai,
X. G. Li,
Y. K. Wu,
Y. W. Ma,
Y. L. Ma,
J. H. Wang,
H. Y. Zhang,
Y. P. Song,
L. M. Duan
Abstract:
We experimentally demonstrate a parametric iSWAP gate in a superconducting circuit based on a tunable coupler for achieving a continuous tunability to eliminate unwanted qubit interactions. We implement the twoqubit iSWAP gate by applying a fast-flux bias modulation pulse on the coupler to turn on parametric exchange interaction between computational qubits. The controllable interaction can provid…
▽ More
We experimentally demonstrate a parametric iSWAP gate in a superconducting circuit based on a tunable coupler for achieving a continuous tunability to eliminate unwanted qubit interactions. We implement the twoqubit iSWAP gate by applying a fast-flux bias modulation pulse on the coupler to turn on parametric exchange interaction between computational qubits. The controllable interaction can provide an extra degree of freedom to verify the optimal condition for constructing the parametric gate. Aiming to fully investigate error sources of the two-qubit gates, we perform quantum process tomography measurements and numerical simulations as varying static ZZ coupling strength. We quantitatively calculate the dynamic ZZ coupling parasitizing in two-qubit gate operation, and extract the particular gate error from the decoherence, dynamic ZZ coupling and high-order oscillation terms. Our results reveal that the main gate error comes from the decoherence, while the increase in the dynamic ZZ coupling and high-order oscillation error degrades the parametric gate performance. This approach, which has not yet been previously explored, provides a guiding principle to improve gate fidelity of parametric iSWAP gate by suppression of the unwanted qubit interactions. This controllable interaction, together with the parametric modulation technique, is desirable for crosstalk free multiqubit quantum circuits and quantum simulation applications.
△ Less
Submitted 27 August, 2020; v1 submitted 18 March, 2020;
originally announced March 2020.
-
Electronics of Time-of-flight Measurement for Back-n at CSNS
Authors:
T. Yu,
P. Cao,
X. Y. Ji,
L. K. Xie,
X. R. Huang,
Q. An,
H. Y. Bai,
J. Bao,
Y. H. Chen,
P. J. Cheng,
Z. Q. Cui,
R. R. Fan,
C. Q. Feng,
M. H. Gu,
Z. J. Han,
G. Z. He,
Y. C. He,
Y. F. He,
H. X. Huang,
W. L. Huang,
X. L. Ji,
H. Y. Jiang,
W. Jiang,
H. Y. **g,
L. Kang
, et al. (46 additional authors not shown)
Abstract:
Back-n is a white neutron experimental facility at China Spallation Neutron Source (CSNS). The time structure of the primary proton beam make it fully applicable to use TOF (time-of-flight) method for neutron energy measuring. We implement the electronics of TOF measurement on the general-purpose readout electronics designed for all of the seven detectors in Back-n. The electronics is based on PXI…
▽ More
Back-n is a white neutron experimental facility at China Spallation Neutron Source (CSNS). The time structure of the primary proton beam make it fully applicable to use TOF (time-of-flight) method for neutron energy measuring. We implement the electronics of TOF measurement on the general-purpose readout electronics designed for all of the seven detectors in Back-n. The electronics is based on PXIe (Peripheral Component Interconnect Express eXtensions for Instrumentation) platform, which is composed of FDM (Field Digitizer Modules), TCM (Trigger and Clock Module), and SCM (Signal Conditioning Module). T0 signal synchronous to the CSNS accelerator represents the neutron emission from the target. It is the start of time stamp. The trigger and clock module (TCM) receives, synchronizes and distributes the T0 signal to each FDM based on the PXIe backplane bus. Meantime, detector signals after being conditioned are fed into FDMs for waveform digitizing. First sample point of the signal is the stop of time stamp. According to the start, stop time stamp and the time of signal over threshold, the total TOF can be obtained. FPGA-based (Field Programmable Gate Array) TDC is implemented on TCM to accurately acquire the time interval between the asynchronous T0 signal and the global synchronous clock phase. There is also an FPGA-based TDC on FDM to accurately acquire the time interval between T0 arriving at FDM and the first sample point of the detector signal, the over threshold time of signal is obtained offline. This method for TOF measurement is efficient and not needed for additional modules. Test result shows the accuracy of TOF is sub-nanosecond and can meet the requirement for Back-n at CSNS.
△ Less
Submitted 24 June, 2018;
originally announced June 2018.
-
T0 Fan-out for Back-n White Neutron Facility at CSNS
Authors:
X. Y. Ji,
P. Cao,
T. Yu,
L. K. Xie,
X. R. Huang,
Q. An,
H. Y. Bai,
J. Bao,
Y. H. Chen,
P. J. Cheng,
Z. Q. Cui,
R. R. Fan,
C. Q. Feng,
M. H. Gu,
Z. J. Han,
G. Z. He,
Y. C. He,
Y. F. He,
H. X. Huang,
W. L. Huang,
X. L. Ji,
H. Y. Jiang,
W. Jiang,
H. Y. **g,
L. Kang
, et al. (46 additional authors not shown)
Abstract:
the main physics goal for Back-n white neutron facility at China Spallation Neutron Source (CSNS) is to measure nuclear data. The energy of neutrons is one of the most important parameters for measuring nuclear data. Method of time of flight (TOF) is used to obtain the energy of neutrons. The time when proton bunches hit the thick tungsten target is considered as the start point of TOF. T0 signal,…
▽ More
the main physics goal for Back-n white neutron facility at China Spallation Neutron Source (CSNS) is to measure nuclear data. The energy of neutrons is one of the most important parameters for measuring nuclear data. Method of time of flight (TOF) is used to obtain the energy of neutrons. The time when proton bunches hit the thick tungsten target is considered as the start point of TOF. T0 signal, generated from the CSNS accelerator, represents this start time. Besides, the T0 signal is also used as the gate control signal that triggers the readout electronics. Obviously, the timing precision of T0 directly affects the measurement precision of TOF and controls the running or readout electronics. In this paper, the T0 fan-out for Back-n white neutron facility at CSNS is proposed. The T0 signal travelling from the CSNS accelerator is fanned out to the two underground experiment stations respectively over long cables. To guarantee the timing precision, T0 signal is conditioned with good signal edge. Furthermore, techniques of signal pre-emphasizing and equalizing are used to improve signal quality after T0 being transmitted over long cables with about 100 m length. Experiments show that the T0 fan-out works well, the T0 signal transmitted over 100 m remains a good time resolution with a standard deviation of 25 ps. It absolutely meets the required accuracy of the measurement of TOF.
△ Less
Submitted 24 June, 2018;
originally announced June 2018.
-
Study of Light Scalar Meson Structure in $D_1$ decay
Authors:
H. Hoshino,
M. Harada,
Y. L. Ma
Abstract:
We study the quark structure of the sigma meson through the decay of $D_1(2430)$ meson by constructing an effective Lagrangian for charmed mesons interacting with light mesons based on the chiral symmetry and heavy quark symmetry. Within the linear realization of the chiral symmetry, we include the P-wave charmed mesons ($D_1(2430)$, $D_0(2400)$) as the chiral partners of ($D^\ast$, $D$), and the…
▽ More
We study the quark structure of the sigma meson through the decay of $D_1(2430)$ meson by constructing an effective Lagrangian for charmed mesons interacting with light mesons based on the chiral symmetry and heavy quark symmetry. Within the linear realization of the chiral symmetry, we include the P-wave charmed mesons ($D_1(2430)$, $D_0(2400)$) as the chiral partners of ($D^\ast$, $D$), and the light scalar mesons as the chiral partner of the pseudoscalar mesons. In the light meson sector, both the $q\bar{q}$ and $qq\bar{q}\bar{q}$ states are incorporated respecting their different U(1)$_A$ transformation properties. We predict the $D_1 \to Dππ$ decay width with two pions in the $I=0,\,l=0$ channel, which can be tested in the future experiment. We find that the width increases with the percentage of the $q\bar{q}$ content in the sigma meson.
△ Less
Submitted 20 March, 2012;
originally announced March 2012.
-
Research of Mechanical Properties of Ni-Ti-Nb Alloyson Low Temperature and Restriction Behavior
Authors:
L. X. Zheng,
N. Li,
Y. L. Ma,
G. M. Li
Abstract:
Mechanical Properties of Ni-Ti-Nb alloys with these conditions of cold-drawing, non-vacuum heat treatment and vacuum heat treatment were measured at low temperature, and Mechanical Properties of Ni47Ti44Nb9 alloys of restricting recover was compared with the one of alloys of non-restricting recover, and these rules of the mechanical performance between them was analyzed. Experiment indicates tha…
▽ More
Mechanical Properties of Ni-Ti-Nb alloys with these conditions of cold-drawing, non-vacuum heat treatment and vacuum heat treatment were measured at low temperature, and Mechanical Properties of Ni47Ti44Nb9 alloys of restricting recover was compared with the one of alloys of non-restricting recover, and these rules of the mechanical performance between them was analyzed. Experiment indicates that, mechanical Properties of vacuum heat treatment's alloys was more excellent than the other two (non-vacuum heat treatment and cold-drawing), and the stress curves of alloys of restricting recover haven't the evident yield band, and the stress of alloys of restricting recover was higher than the ones of alloys of non-restricting recover, but the stress of alloys of restricting recover was lower than the ones of alloys of non-restricting recover.
△ Less
Submitted 13 May, 2009; v1 submitted 7 May, 2009;
originally announced May 2009.
-
Nonsymmetric Gravity and Noncommutative Signals
Authors:
N. Kersting,
Y. L. Ma
Abstract:
Models in which the space-time metric $g_{μν}$ is not symmetric, $i.e.$ $g_{μν} \ne g_{νμ}$ may make predictions in scattering experiments, for example in a future $e^+e^-$ linear collider, similar to those from noncommutative field theory. We compute the differential cross sections for pair annihilation, Bhabha and M$ø$ller scattering and find that both nonsymmetric gravity theory(NGT) and nonc…
▽ More
Models in which the space-time metric $g_{μν}$ is not symmetric, $i.e.$ $g_{μν} \ne g_{νμ}$ may make predictions in scattering experiments, for example in a future $e^+e^-$ linear collider, similar to those from noncommutative field theory. We compute the differential cross sections for pair annihilation, Bhabha and M$ø$ller scattering and find that both nonsymmetric gravity theory(NGT) and noncommutative field theory predict a similar dependence of the differential cross section on the azimuthal angle in agreement with all known data, however in NGT Lorentz violation need not be as severe. Astrophysical and cosmological tests may prove very useful in distinguishing these two theories.
△ Less
Submitted 22 May, 2003;
originally announced May 2003.
-
Review of the Phenomenology of Noncommutative Geometry
Authors:
I. Hinchliffe,
N. Kersting,
Y. L. Ma
Abstract:
We present a pedagogical review of particle physics models that are based on the noncommutativity of space-time, $[\hat{x}_μ,\hat{x}_ν]=i θ_{μν}$, with specific attention to the phenomenology these models predict in particle experiments either in existence or under development. We summarize results obtained for high energy scattering such as would occur for example in a future $e^+e^-$ linear co…
▽ More
We present a pedagogical review of particle physics models that are based on the noncommutativity of space-time, $[\hat{x}_μ,\hat{x}_ν]=i θ_{μν}$, with specific attention to the phenomenology these models predict in particle experiments either in existence or under development. We summarize results obtained for high energy scattering such as would occur for example in a future $e^+e^-$ linear collider with $\sqrt{s} = 500 GeV$, as well as low energy experiments such as those pertaining to elementary electric dipole moments and other $\cpviolng$ observables, and finally comment on the status of phenomenological work in cosmology and extra dimensions.
△ Less
Submitted 3 May, 2003; v1 submitted 5 May, 2002;
originally announced May 2002.
