Showing 1–19 of 19 results for author: MARTIGNAC, J

Euclid. III. The NISP Instrument

Authors: Euclid Collaboration, K. Jahnke, W. Gillard, M. Schirmer, A. Ealet, T. Maciaszek, E. Prieto, R. Barbier, C. Bonoli, L. Corcione, S. Dusini, F. Grupp, F. Hormuth, S. Ligori, L. Martin, G. Morgante, C. Padilla, R. Toledo-Moreo, M. Trifoglio, L. Valenziano, R. Bender, F. J. Castander, B. Garilli, P. B. Lilje, H. -W. Rix , et al. (412 additional authors not shown)

Abstract: The Near-Infrared Spectrometer and Photometer (NISP) on board the Euclid satellite provides multiband photometry and R>=450 slitless grism spectroscopy in the 950-2020nm wavelength range. In this reference article we illuminate the background of NISP's functional and calibration requirements, describe the instrument's integral components, and provide all its key properties. We also sketch the proc… ▽ More The Near-Infrared Spectrometer and Photometer (NISP) on board the Euclid satellite provides multiband photometry and R>=450 slitless grism spectroscopy in the 950-2020nm wavelength range. In this reference article we illuminate the background of NISP's functional and calibration requirements, describe the instrument's integral components, and provide all its key properties. We also sketch the processes needed to understand how NISP operates and is calibrated, and its technical potentials and limitations. Links to articles providing more details and technical background are included. NISP's 16 HAWAII-2RG (H2RG) detectors with a plate scale of 0.3" pix^-1 deliver a field-of-view of 0.57deg^2. In photo mode, NISP reaches a limiting magnitude of ~24.5AB mag in three photometric exposures of about 100s exposure time, for point sources and with a signal-to-noise ratio (SNR) of 5. For spectroscopy, NISP's point-source sensitivity is a SNR = 3.5 detection of an emission line with flux ~2x10^-16erg/s/cm^2 integrated over two resolution elements of 13.4A, in 3x560s grism exposures at 1.6 mu (redshifted Ha). Our calibration includes on-ground and in-flight characterisation and monitoring of detector baseline, dark current, non-linearity, and sensitivity, to guarantee a relative photometric accuracy of better than 1.5%, and relative spectrophotometry to better than 0.7%. The wavelength calibration must be better than 5A. NISP is the state-of-the-art instrument in the NIR for all science beyond small areas available from HST and JWST - and an enormous advance due to its combination of field size and high throughput of telescope and instrument. During Euclid's 6-year survey covering 14000 deg^2 of extragalactic sky, NISP will be the backbone for determining distances of more than a billion galaxies. Its NIR data will become a rich reference imaging and spectroscopy data set for the coming decades. △ Less

Submitted 22 May, 2024; originally announced May 2024.

Comments: Paper submitted as part of the A&A special issue 'Euclid on Sky', which contains Euclid key reference papers and first results from the Euclid Early Release Observations

Euclid. II. The VIS Instrument

Authors: Euclid Collaboration, M. Cropper, A. Al-Bahlawan, J. Amiaux, S. Awan, R. Azzollini, K. Benson, M. Berthe, J. Boucher, E. Bozzo, C. Brockley-Blatt, G. P. Candini, C. Cara, R. A. Chaudery, R. E. Cole, P. Danto, J. Denniston, A. M. Di Giorgio, B. Dryer, J. Endicott, J. -P. Dubois, M. Farina, E. Galli, L. Genolet, J. P. D. Gow , et al. (403 additional authors not shown)

Abstract: This paper presents the specification, design, and development of the Visible Camera (VIS) on the ESA Euclid mission. VIS is a large optical-band imager with a field of view of 0.54 deg^2 sampled at 0.1" with an array of 609 Megapixels and spatial resolution of 0.18". It will be used to survey approximately 14,000 deg^2 of extragalactic sky to measure the distortion of galaxies in the redshift ran… ▽ More This paper presents the specification, design, and development of the Visible Camera (VIS) on the ESA Euclid mission. VIS is a large optical-band imager with a field of view of 0.54 deg^2 sampled at 0.1" with an array of 609 Megapixels and spatial resolution of 0.18". It will be used to survey approximately 14,000 deg^2 of extragalactic sky to measure the distortion of galaxies in the redshift range z=0.1-1.5 resulting from weak gravitational lensing, one of the two principal cosmology probes of Euclid. With photometric redshifts, the distribution of dark matter can be mapped in three dimensions, and, from how this has changed with look-back time, the nature of dark energy and theories of gravity can be constrained. The entire VIS focal plane will be transmitted to provide the largest images of the Universe from space to date, reaching m_AB>24.5 with S/N >10 in a single broad I_E~(r+i+z) band over a six year survey. The particularly challenging aspects of the instrument are the control and calibration of observational biases, which lead to stringent performance requirements and calibration regimes. With its combination of spatial resolution, calibration knowledge, depth, and area covering most of the extra-Galactic sky, VIS will also provide a legacy data set for many other fields. This paper discusses the rationale behind the VIS concept and describes the instrument design and development before reporting the pre-launch performance derived from ground calibrations and brief results from the in-orbit commissioning. VIS should reach fainter than m_AB=25 with S/N>10 for galaxies of full-width half-maximum of 0.3" in a 1.3" diameter aperture over the Wide Survey, and m_AB>26.4 for a Deep Survey that will cover more than 50 deg^2. The paper also describes how VIS works with the other Euclid components of survey, telescope, and science data processing to extract the cosmological information. △ Less

Submitted 22 May, 2024; originally announced May 2024.

Comments: Paper submitted as part of the A&A special issue `Euclid on Sky', which contains Euclid key reference papers and first results from the Euclid Early Release Observations

Euclid. I. Overview of the Euclid mission

Authors: Euclid Collaboration, Y. Mellier, Abdurro'uf, J. A. Acevedo Barroso, A. Achúcarro, J. Adamek, R. Adam, G. E. Addison, N. Aghanim, M. Aguena, V. Ajani, Y. Akrami, A. Al-Bahlawan, A. Alavi, I. S. Albuquerque, G. Alestas, G. Alguero, A. Allaoui, S. W. Allen, V. Allevato, A. V. Alonso-Tetilla, B. Altieri, A. Alvarez-Candal, A. Amara, L. Amendola , et al. (1086 additional authors not shown)

Abstract: The current standard model of cosmology successfully describes a variety of measurements, but the nature of its main ingredients, dark matter and dark energy, remains unknown. Euclid is a medium-class mission in the Cosmic Vision 2015-2025 programme of the European Space Agency (ESA) that will provide high-resolution optical imaging, as well as near-infrared imaging and spectroscopy, over about 14… ▽ More The current standard model of cosmology successfully describes a variety of measurements, but the nature of its main ingredients, dark matter and dark energy, remains unknown. Euclid is a medium-class mission in the Cosmic Vision 2015-2025 programme of the European Space Agency (ESA) that will provide high-resolution optical imaging, as well as near-infrared imaging and spectroscopy, over about 14,000 deg^2 of extragalactic sky. In addition to accurate weak lensing and clustering measurements that probe structure formation over half of the age of the Universe, its primary probes for cosmology, these exquisite data will enable a wide range of science. This paper provides a high-level overview of the mission, summarising the survey characteristics, the various data-processing steps, and data products. We also highlight the main science objectives and expected performance. △ Less

Submitted 22 May, 2024; originally announced May 2024.

Comments: Paper submitted as part of the A&A special issue`Euclid on Sky'

Probing the structure of a massive filament: ArTeMiS 350 and 450 micron map** of the integral-shaped filament in Orion A

Authors: F. Schuller, Ph. André, Y. Shimajiri, A. Zavagno, N. Peretto, D. Arzoumanian, T. Csengeri, V. Könyves, P. Palmeirim, S. Pezzuto, A. Rigby, H. Roussel, H. Ajeddig, L. Dumaye, P. Gallais, J. Le Pennec, J. Martignac, M. Mattern, V. Revéret, L. Rodriguez, M. Talvard

Abstract: (abridged) Within the Orion A molecular cloud, the integral-shaped filament (ISF) is a prominent, degree-long structure of dense gas and dust, with clear signs of recent and on-going high-mass star formation. We used the ArTeMiS bolometer camera at APEX to map a 0.6x0.2 deg^2 region covering OMC-1, OMC-2, OMC-3 at 350 and 450 micron. We combined these data with Herschel-SPIRE maps to recover exten… ▽ More (abridged) Within the Orion A molecular cloud, the integral-shaped filament (ISF) is a prominent, degree-long structure of dense gas and dust, with clear signs of recent and on-going high-mass star formation. We used the ArTeMiS bolometer camera at APEX to map a 0.6x0.2 deg^2 region covering OMC-1, OMC-2, OMC-3 at 350 and 450 micron. We combined these data with Herschel-SPIRE maps to recover extended emission. The combined Herschel-ArTeMiS maps provide details on the distribution of dense, cold material, with a high spatial dynamic range, from our 8'' resolution (0.016 pc) up to the size of the map ~10-15 deg. By combining Herschel and ArTeMiS data at 160, 250, 350 and 450 micron, we constructed high-resolution temperature and H2 column density maps. We extracted radial profiles from the column density map in several, representative portions of the ISF, that we fitted with Gaussian and Plummer models to derive their intrinsic widths. We also compared the distribution of material traced by ArTeMiS with that seen in the higher density tracer N2H+(1-0) recently observed with the ALMA interferometer. All the radial profiles that we extracted show clear deviation from a Gaussian, with evidence for an inner plateau, previously not seen using Herschel-only data. We measure intrinsic half-power widths in the range 0.06 to 0.11 pc. This is significantly larger than the Gaussian widths measured for fibers seen in N2H+, which probably traces only the dense innermost regions of the large-scale filament. These half-power widths are within a factor of two of the value of 0.1 pc found for a large sample of nearby filaments in various low-mass star-forming regions, which tends to indicate that the physical conditions governing the fragmentation of prestellar cores within transcritical or supercritical filaments are the same over a large range of masses per unit length. △ Less

Submitted 26 May, 2021; v1 submitted 8 April, 2021; originally announced April 2021.

Comments: 17 pages, accepted for publication in A&A. Revised version after language editing

Journal ref: A&A 651, A36 (2021)

B-BOP, the SPICA Imaging Polarimeter

Authors: Vincent Revéret, Marc Sauvage, Obaïd Adami, Abdelkader Aliane, Michel Berthé, Sophie Bounissou, Xavier de la Broïse, Marcos Chimeno, Amala Demonti, Jacques Delabrouille, Cyrille Delisle, Eric Doumayrou, Lionel Duband, Didier Dubreuil, Laurent Dussopt, Pierre-Antoine Frugier, Camille Gennet, Olivier Gevin, Valérie Goudon, Hacile Kaya, Benoît Marquet, Jérôme Martignac, Sylvain Martin, Paco Najarro, Xavier-François Navick , et al. (6 additional authors not shown)

Abstract: We present the B-BOP instrument, a polarimetric camera on board the future ESA-JAXA SPICA far-infrared space observatory. B-BOP will allow the study of the magnetic field in various astrophysical environments thanks to its unprecedented ability to measure the linear polarization of the submillimeter light. The maps produced by B-BOP will contain not only information on total power, but also on the… ▽ More We present the B-BOP instrument, a polarimetric camera on board the future ESA-JAXA SPICA far-infrared space observatory. B-BOP will allow the study of the magnetic field in various astrophysical environments thanks to its unprecedented ability to measure the linear polarization of the submillimeter light. The maps produced by B-BOP will contain not only information on total power, but also on the degree and the angle of polarization, simultaneously in three spectral bands (70, 200 and 350 microns). The B-BOP detectors are ultra-sensitive silicon bolometers that are intrinsically sensitive to polarization. Their NEP is close to 10E-18 W/sqrt(Hz). We will present the optical and thermal architectures of the instrument, we will detail the bolometer design and we will show the expected performances of the instrument based on preliminary lab work. △ Less

Submitted 15 February, 2021; originally announced February 2021.

Comments: 10 pages, 6 figures, SPIE proceeding: Astronomical Telescopes + Instrumentation 2020

Second generation of portable gamma camera based on Caliste CdTe hybrid technology

Authors: Daniel MAIER, Claire BLONDEL, Cyrille DELISLE, Olivier LIMOUSIN, Jerome MARTIGNAC, Aline MEURIS, Francois VISTICOT, Geoffrey DANIEL, Pierre-Anne BAUSSON, Olivier GEVIN, Guillaume AMOYAL, Frederick CARREL, Vincent SCHOEPFF, Charly MAHE, Fabrice SOUFFLET, Marie-Cecile VASSAL

Abstract: In the framework of a national funded program for nuclear safety, a first prototype of portable gamma camera was built and tested. It integrates a Caliste-HD CdTe-hybrid detector designed for space X-ray astronomy coupled with a new system-on-chip based acquisition system (FPGA and ARM microprocessor) and thermo-electrical coolers for a use at room temperature. The complete gamma part of the camer… ▽ More In the framework of a national funded program for nuclear safety, a first prototype of portable gamma camera was built and tested. It integrates a Caliste-HD CdTe-hybrid detector designed for space X-ray astronomy coupled with a new system-on-chip based acquisition system (FPGA and ARM microprocessor) and thermo-electrical coolers for a use at room temperature. The complete gamma part of the camera fits in a volume of 15 x 15 x 40 cm^3 for a mass lower than 1 kg and a power consumption lower than 10 W. Localization and spectro-identification of radionuclides in a contaminated scene were demonstrated during several test campaigns. A new generation of system is under development taking into account feedback experience from in-situ measurements and integrating a new generation of sensor cost-optimized by industrial applications called Caliste-O. Caliste-O holds a 16 x 16 pixel detector of 14 x 14 mm^2 and 2 mm thick with 8 full-custom front-end IDeF-X HD ASICs. Two prototypes were fabricated and tested. The paper will present the results of in-situ measurements with the first gamma camera, the spectroscopic performance of Caliste-O and the design of the second generation of gamma camera which aims for real time imaging and spectro-identification. △ Less

Submitted 28 January, 2020; originally announced January 2020.

Comments: 6 pages, 7 figures

VIS: the visible imager for Euclid

Authors: Mark Cropper, S. Pottinger, S. Niemi, R. Azzollini, J. Denniston, M. Szafraniec, S. Awan, Y. Mellier, M. Berthe, J. Martignac, C. Cara, A. -M. di Giorgio, A. Sciortino, E. Bozzo, L. Genolet, R. Cole, A. Philippon, M. Hailey, T. Hunt, I. Swindells, A. Holland, J. Gow, N. Murray, D. Hall, J. Skottfelt , et al. (11 additional authors not shown)

Abstract: Euclid-VIS is the large format visible imager for the ESA Euclid space mission in their Cosmic Vision program, scheduled for launch in 2020. Together with the near infrared imaging within the NISP instrument, it forms the basis of the weak lensing measurements of Euclid. VIS will image in a single r+i+z band from 550-900 nm over a field of view of ~0.5 deg2. By combining 4 exposures with a total o… ▽ More Euclid-VIS is the large format visible imager for the ESA Euclid space mission in their Cosmic Vision program, scheduled for launch in 2020. Together with the near infrared imaging within the NISP instrument, it forms the basis of the weak lensing measurements of Euclid. VIS will image in a single r+i+z band from 550-900 nm over a field of view of ~0.5 deg2. By combining 4 exposures with a total of 2260 sec, VIS will reach to deeper than mAB=24.5 (10sigma) for sources with extent ~0.3 arcsec. The image sampling is 0.1 arcsec. VIS will provide deep imaging with a tightly controlled and stable point spread function (PSF) over a wide survey area of 15000 deg2 to measure the cosmic shear from nearly 1.5 billion galaxies to high levels of accuracy, from which the cosmological parameters will be measured. In addition, VIS will also provide a legacy dataset with an unprecedented combination of spatial resolution, depth and area covering most of the extra-Galactic sky. Here we will present the results of the study carried out by the Euclid Consortium during the period up to the Critical Design Review. △ Less

Submitted 30 August, 2016; originally announced August 2016.

Comments: 16 pages, 15 figures, 1 table

Journal ref: Proc. SPIE 9904, Space Telescopes and Instrumentation 2016: Optical, Infrared, and Millimeter Wave, 99040Q (July 19, 2016)

Characterizing filaments in regions of high-mass star formation: High-resolution submilimeter imaging of the massive star-forming complex NGC 6334 with ArTéMiS

Authors: Ph. André, V. Revéret, V. Könyves, D. Arzoumanian, J. Tigé, P. Gallais, H. Roussel, J. Le Pennec, L. Rodriguez, E. Doumayrou, D. Dubreuil, M. Lortholary, J. Martignac, M. Talvard, C. Delisle, F. Visticot, L. Dumaye, C. De Breuck, Y. Shimajiri, F. Motte, S. Bontemps, M. Hennemann, A. Zavagno, D. Russeil, N. Schneider , et al. (6 additional authors not shown)

Abstract: Herschel observations of nearby molecular clouds suggest that interstellar filaments and prestellar cores represent two fundamental steps in the star formation process. The observations support a picture of low-mass star formation according to which ~ 0.1 pc-wide filaments form first in the cold interstellar medium, probably as a result of large-scale compression of interstellar matter by superson… ▽ More Herschel observations of nearby molecular clouds suggest that interstellar filaments and prestellar cores represent two fundamental steps in the star formation process. The observations support a picture of low-mass star formation according to which ~ 0.1 pc-wide filaments form first in the cold interstellar medium, probably as a result of large-scale compression of interstellar matter by supersonic turbulent flows, and then prestellar cores arise from gravitational fragmentation of the densest filaments. Whether this scenario also applies to regions of high-mass star formation is an open question, in part because Herschel data cannot resolve the inner width of filaments in the nearest regions of massive star formation. We used the bolometer camera ArTeMiS on the APEX telescope to map the central part of the NGC6334 complex at a factor of > 3 higher resolution than Herschel at 350 microns. Combining ArTeMiS data with Herschel data allowed us to study the structure of the main filament of the complex with a resolution of 8" or < 0.07 pc at d ~ 1.7 kpc. Our study confirms that this filament is a very dense, massive linear structure with a line mass ranging from ~ 500 Msun/pc to ~ 2000 Msun/pc over nearly 10 pc. It also demonstrates that its inner width remains as narrow as W ~ 0.15 +- 0.05 pc all along the filament length, within a factor of < 2 of the characteristic 0.1 pc value found with Herschel for lower-mass filaments in the Gould Belt. While it is not completely clear whether the NGC 6334 filament will form massive stars or not in the future, it is two to three orders of magnitude denser than the majority of filaments observed in Gould Belt clouds, and yet has a very similar inner width. This points to a common physical mechanism for setting the filament width and suggests that some important structural properties of nearby clouds also hold in high-mass star forming regions. △ Less

Submitted 24 May, 2016; originally announced May 2016.

Comments: 10 pages, 6 figures. A&A, in press

Journal ref: A&A 592, A54 (2016)

The ArTéMiS wide-field submillimeter camera: preliminary on-sky performances at 350 microns

Authors: Vincent Reveret, Philippe André, Jean Le Pennec, Michel Talvard, Patrick Agnèse, Agnès Arnaud, Laurent Clerc, Carlos de Breuck, Jean-Charles Cigna, Cyrille Delisle, Eric Doumayrou, Lionel Duband, Didier Dubreuil, Luc Dumaye, Eric Ercolani, Pascal Gallais, Elodie Groult, Thierry Jourdan, Bernadette Leriche, Bruno Maffei, Michel Lortholary, Jérôme Martignac, Wilfried Rabaud, Johan Relland, Louis Rodriguez , et al. (2 additional authors not shown)

Abstract: ArTeMiS is a wide-field submillimeter camera operating at three wavelengths simultaneously (200, 350 and 450 microns). A preliminary version of the instrument equipped with the 350 microns focal plane, has been successfully installed and tested on APEX telescope in Chile during the 2013 and 2014 austral winters. This instrument is developed by CEA (Saclay and Grenoble, France), IAS (France) and Un… ▽ More ArTeMiS is a wide-field submillimeter camera operating at three wavelengths simultaneously (200, 350 and 450 microns). A preliminary version of the instrument equipped with the 350 microns focal plane, has been successfully installed and tested on APEX telescope in Chile during the 2013 and 2014 austral winters. This instrument is developed by CEA (Saclay and Grenoble, France), IAS (France) and University of Manchester (UK) in collaboration with ESO. We introduce the mechanical and optical design, as well as the cryogenics and electronics of the ArTeMiS camera. ArTeMiS detectors are similar to the ones developed for the Herschel PACS photometer but they are adapted to the high optical load encountered at APEX site. Ultimately, ArTeMiS will contain 4 sub-arrays at 200 microns and 2x8 sub-arrays at 350 and 450 microns. We show preliminary lab measurements like the responsivity of the instrument to hot and cold loads illumination and NEP calculation. Details on the on-sky commissioning runs made in 2013 and 2014 at APEX are shown. We used planets (Mars, Saturn, Uranus) to determine the flat-field and to get the flux calibration. A pointing model was established in the first days of the runs. The average relative pointing accuracy is 3 arcsec. The beam at 350 microns has been estimated to be 8.5 arcsec, which is in good agreement with the beam of the 12 m APEX dish. Several observing modes have been tested, like On-The-Fly for beam-maps or large maps, spirals or raster of spirals for compact sources. With this preliminary version of ArTeMiS, we concluded that the map** speed is already more than 5 times better than the previous 350 microns instrument at APEX. The median NEFD at 350 microns is 600 mJy.s1/2, with best values at 300 mJy.s1/2. The complete instrument with 5760 pixels and optimized settings will be installed during the first half of 2015. △ Less

Submitted 9 July, 2014; originally announced July 2014.

Comments: 11 pages, 11 figures. Presented at SPIE Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy VII, June 24, 2014. To be published in Proceedings of SPIE Volume 9153

Resolving the Vela C ridge with P-ArTeMiS and Herschel

Authors: T. Hill, Ph. Andre, D. Arzoumanian, F. Motte, V. Minier, A. Menshchikov, P. Didelon, M. Hennemann, V. Konyves, Q. Nguyen-Luong, P. Palmeirim, N. Peretto, N. Schneider, S. Bontemps, F. Louvet, D. Elia, T. Giannini, V. Reveret, J. Le Pennec, L. Rodriguez, O. Boulade, E. Doumayrou, D. Dubreuil, P. Gallais, M. Lortholary , et al. (3 additional authors not shown)

Abstract: We present APEX/P-ArTéMiS 450μm continuum observations of RCW 36 and the adjacent ridge, a high-mass high-column density filamentary structure at the centre of the Vela C molecular cloud. These observations, at higher resolution than Herschel's SPIRE camera, reveal clear fragmentation of the central star-forming ridge. Combined with PACS far-infrared and SPIRE sub-millimetre observations from the… ▽ More We present APEX/P-ArTéMiS 450μm continuum observations of RCW 36 and the adjacent ridge, a high-mass high-column density filamentary structure at the centre of the Vela C molecular cloud. These observations, at higher resolution than Herschel's SPIRE camera, reveal clear fragmentation of the central star-forming ridge. Combined with PACS far-infrared and SPIRE sub-millimetre observations from the Herschel HOBYS project we build a high resolution column density map of the region mapped with P-ArTéMiS. We extract the radial density profile of the Vela C ridge which with a ~ 0.1pc central width is consistent with that measured for low-mass star-forming filaments in the Herschel Gould Belt survey. Direct comparison with Serpens South, of the Gould Belt Aquila complex, reveals many similarities between the two regions. Despite likely different formation mechanisms and histories, the Vela C ridge and Serpens South filament share common characteristics, including their filament central widths. △ Less

Submitted 1 November, 2012; originally announced November 2012.

Comments: Accepted by A&A Letters; 4 pages with an appendix; 6 figures - 2 online, 1 in an appendix

VIS: the visible imager for Euclid

Authors: Mark Cropper, R. Cole, A. James, Y. Mellier, J. Martignac, A. -M. di Giorgio, S. Paltani, L. Genolet, J. -J. Fourmond, C. Cara, J. Amiaux, P. Guttridge, D. Walton, P. Thomas, K. Rees, P. Pool, J. Endicott, A. Holland, J. Gow, N. Murray, L. Duvet, J. -L. Augueres, R. Laureijs, P. Gondoin, T. Kitching , et al. (3 additional authors not shown)

Abstract: Euclid-VIS is a large format visible imager for the ESA Euclid space mission in their Cosmic Vision program, scheduled for launch in 2019. Together with the near infrared imaging within the NISP instrument it forms the basis of the weak lensing measurements of Euclid. VIS will image in a single r+i+z band from 550-900 nm over a field of view of ~0.5 deg2. By combining 4 exposures with a total of 2… ▽ More Euclid-VIS is a large format visible imager for the ESA Euclid space mission in their Cosmic Vision program, scheduled for launch in 2019. Together with the near infrared imaging within the NISP instrument it forms the basis of the weak lensing measurements of Euclid. VIS will image in a single r+i+z band from 550-900 nm over a field of view of ~0.5 deg2. By combining 4 exposures with a total of 2240 sec, VIS will reach to V=24.5 (10σ) for sources with extent ~0.3 arcsec. The image sampling is 0.1 arcsec. VIS will provide deep imaging with a tightly controlled and stable point spread function (PSF) over a wide survey area of 15000 deg2 to measure the cosmic shear from nearly 1.5 billion galaxies to high levels of accuracy, from which the cosmological parameters will be measured. In addition, VIS will also provide a legacy imaging dataset with an unprecedented combination of spatial resolution, depth and area covering most of the extra-Galactic sky. Here we will present the results of the study carried out by the Euclid Consortium during the Euclid Definition phase. △ Less

Submitted 16 August, 2012; originally announced August 2012.

Comments: 10 pages, 6 figures

Euclid Definition Study Report

Authors: R. Laureijs, J. Amiaux, S. Arduini, J. -L. Auguères, J. Brinchmann, R. Cole, M. Cropper, C. Dabin, L. Duvet, A. Ealet, B. Garilli, P. Gondoin, L. Guzzo, J. Hoar, H. Hoekstra, R. Holmes, T. Kitching, T. Maciaszek, Y. Mellier, F. Pasian, W. Percival, J. Rhodes, G. Saavedra Criado, M. Sauvage, R. Scaramella , et al. (194 additional authors not shown)

Abstract: Euclid is a space-based survey mission from the European Space Agency designed to understand the origin of the Universe's accelerating expansion. It will use cosmological probes to investigate the nature of dark energy, dark matter and gravity by tracking their observational signatures on the geometry of the universe and on the cosmic history of structure formation. The mission is optimised for tw… ▽ More Euclid is a space-based survey mission from the European Space Agency designed to understand the origin of the Universe's accelerating expansion. It will use cosmological probes to investigate the nature of dark energy, dark matter and gravity by tracking their observational signatures on the geometry of the universe and on the cosmic history of structure formation. The mission is optimised for two independent primary cosmological probes: Weak gravitational Lensing (WL) and Baryonic Acoustic Oscillations (BAO). The Euclid payload consists of a 1.2 m Korsch telescope designed to provide a large field of view. It carries two instruments with a common field-of-view of ~0.54 deg2: the visual imager (VIS) and the near infrared instrument (NISP) which contains a slitless spectrometer and a three bands photometer. The Euclid wide survey will cover 15,000 deg2 of the extragalactic sky and is complemented by two 20 deg2 deep fields. For WL, Euclid measures the shapes of 30-40 resolved galaxies per arcmin2 in one broad visible R+I+Z band (550-920 nm). The photometric redshifts for these galaxies reach a precision of dz/(1+z) < 0.05. They are derived from three additional Euclid NIR bands (Y, J, H in the range 0.92-2.0 micron), complemented by ground based photometry in visible bands derived from public data or through engaged collaborations. The BAO are determined from a spectroscopic survey with a redshift accuracy dz/(1+z) =0.001. The slitless spectrometer, with spectral resolution ~250, predominantly detects Ha emission line galaxies. Euclid is a Medium Class mission of the ESA Cosmic Vision 2015-2025 programme, with a foreseen launch date in 2019. This report (also known as the Euclid Red Book) describes the outcome of the Phase A study. △ Less

Submitted 14 October, 2011; originally announced October 2011.

Comments: 116 pages, with executive summary and table of contents

Report number: ESA/SRE(2011)12

The COSPIX mission: focusing on the energetic and obscured Universe

Authors: P. Ferrando, A. Goldwurm, P. Laurent, O. Limousin, V. Beckmann, M. Arnaud, X. Barcons, D. Bomans, I. Caballero, F. Carrera, S. Chaty, J. Chenevez, R. Chipaux, F. Christensen, A. Claret, S. Corbel, J. Croston, E. Daddi, M. De Becker, A. Decourchelle, D. Elbaz, M. Falanga, C. Ferrari, C. Feruglio, D. Götz , et al. (35 additional authors not shown)

Abstract: Tracing the formation and evolution of all supermassive black holes, including the obscured ones, understanding how black holes influence their surroundings and how matter behaves under extreme conditions, are recognized as key science objectives to be addressed by the next generation of instruments. These are the main goals of the COSPIX proposal, made to ESA in December 2010 in the context of it… ▽ More Tracing the formation and evolution of all supermassive black holes, including the obscured ones, understanding how black holes influence their surroundings and how matter behaves under extreme conditions, are recognized as key science objectives to be addressed by the next generation of instruments. These are the main goals of the COSPIX proposal, made to ESA in December 2010 in the context of its call for selection of the M3 mission. In addition, COSPIX, will also provide key measurements on the non thermal Universe, particularly in relation to the question of the acceleration of particles, as well as on many other fundamental questions as for example the energetic particle content of clusters of galaxies. COSPIX is proposed as an observatory operating from 0.3 to more than 100 keV. The payload features a single long focal length focusing telescope offering an effective area close to ten times larger than any scheduled focusing mission at 30 keV, an angular resolution better than 20 arcseconds in hard X-rays, and polarimetric capabilities within the same focal plane instrumentation. In this paper, we describe the science objectives of the mission, its baseline design, and its performances, as proposed to ESA. △ Less

Submitted 8 April, 2011; originally announced April 2011.

Comments: 7 pages, accepted for publication in Proceedings of Science, for the 25th Texas Symposium on Relativistic Astrophysics (eds. F. Rieger &amp; C. van Eldik), PoS(Texas 2010)254

MSC Class: 85-06

The Photodetector Array Camera and Spectrometer (PACS) on the Herschel Space Observatory

Authors: A. Poglitsch, C. Waelkens, N. Geis, H. Feuchtgruber, B. Vandenbussche, L. Rodriguez, O. Krause, E. Renotte, C. van Hoof, P. Saraceno, J. Cepa, F. Kerschbaum, P. Agnese, B. Ali, B. Altieri, P. Andreani, J. -L. Augueres, Z. Balog, L. Barl, O. H. Bauer, N. Belbachir, M. Benedettini, N. Billot, O. Boulade, H. Bischof , et al. (58 additional authors not shown)

Abstract: The Photodetector Array Camera and Spectrometer (PACS) is one of the three science instruments on ESA's far infrared and submillimetre observatory. It employs two Ge:Ga photoconductor arrays (stressed and unstressed) with 16x25 pixels, each, and two filled silicon bolometer arrays with 16x32 and 32x64 pixels, respectively, to perform integral-field spectroscopy and imaging photometry in the 60-210… ▽ More The Photodetector Array Camera and Spectrometer (PACS) is one of the three science instruments on ESA's far infrared and submillimetre observatory. It employs two Ge:Ga photoconductor arrays (stressed and unstressed) with 16x25 pixels, each, and two filled silicon bolometer arrays with 16x32 and 32x64 pixels, respectively, to perform integral-field spectroscopy and imaging photometry in the 60-210μ m wavelength regime. In photometry mode, it simultaneously images two bands, 60-85μ m or 85-125μ\m and 125-210μ m, over a field of view of ~1.75'x3.5', with close to Nyquist beam sampling in each band. In spectroscopy mode, it images a field of 47"x47", resolved into 5x5 pixels, with an instantaneous spectral coverage of ~1500km/s and a spectral resolution of ~175km/s. We summarise the design of the instrument, describe observing modes, calibration, and data analysis methods, and present our current assessment of the in-orbit performance of the instrument based on the Performance Verification tests. PACS is fully operational, and the achieved performance is close to or better than the pre-launch predictions. △ Less

Submitted 20 May, 2010; v1 submitted 10 May, 2010; originally announced May 2010.

Evidence of triggered star formation in G327.3-0.6. Dust-continuum map** of an infrared dark cloud with P-ArTéMiS

Authors: V. Minier, Ph. André, P. Bergman, F. Motte, F. Wyrowski, J. Le Pennec, L. Rodriguez, O. Boulade, E. Doumayrou, D. Dubreuil, P. Gallais, G. Hamon, P. -O. Lagage, M. Lortholary, J. Martignac, V. Revéret, H. Roussel, M. Talvard, G. Willmann, H. Olofsson

Abstract: Aims. Expanding HII regions and propagating shocks are common in the environment of young high-mass star-forming complexes. They can compress a pre-existing molecular cloud and trigger the formation of dense cores. We investigate whether these phenomena can explain the formation of high-mass protostars within an infrared dark cloud located at the position of G327.3-0.6 in the Galactic plane, in… ▽ More Aims. Expanding HII regions and propagating shocks are common in the environment of young high-mass star-forming complexes. They can compress a pre-existing molecular cloud and trigger the formation of dense cores. We investigate whether these phenomena can explain the formation of high-mass protostars within an infrared dark cloud located at the position of G327.3-0.6 in the Galactic plane, in between two large infrared bubbles and two HII regions. Methods: The region of G327.3-0.6 was imaged at 450 ? m with the CEA P-ArTéMiS bolometer array on the Atacama Pathfinder EXperiment telescope in Chile. APEX/LABOCA and APEX-2A, and Spitzer/IRAC and MIPS archives data were used in this study. Results: Ten massive cores were detected in the P-ArTéMiS image, embedded within the infrared dark cloud seen in absorption at both 8 and 24 ?m. Their luminosities and masses indicate that they form high-mass stars. The kinematical study of the region suggests that the infrared bubbles expand toward the infrared dark cloud. Conclusions: Under the influence of expanding bubbles, star formation occurs in the infrared dark areas at the border of HII regions and infrared bubbles. △ Less

Submitted 17 July, 2009; originally announced July 2009.

Comments: 4 pages

Journal ref: Astronomy and Astrophysics 501 (2009) L1-L4

First 450-micron dust continuum map** of the massive star-forming region NGC 3576 with the P-ArTeMiS bolometer camera

Authors: P. André, V. Minier, P. Gallais, V. Reveret, J. Le Pennec, L. Rodriguez, O. Boulade, E. Doumayrou, D. Dubreuil, M. Lortholary, J. Martignac, M. Talvard, C. De Breuck, G. Hamon, N. Schneider, S. Bontemps, P. O. Lagage, E. Pantin, H. Roussel, M. Miller, C. R. Purcell, T. Hill, J. Stutzki

Abstract: Context: The earliest phases of massive star formation are currently much debated. Aims. In an effort to make progress, we took a census of Class0-like protostellar dense cores in the NGC 3576 region, one of the nearest and most luminous embedded sites of high-mass star formation in the Galaxy. Methods: We used the P-ArTeMiS bolometer camera on the APEX telescope to produce the first 450-micron… ▽ More Context: The earliest phases of massive star formation are currently much debated. Aims. In an effort to make progress, we took a census of Class0-like protostellar dense cores in the NGC 3576 region, one of the nearest and most luminous embedded sites of high-mass star formation in the Galaxy. Methods: We used the P-ArTeMiS bolometer camera on the APEX telescope to produce the first 450-micron dust continuum map of the filamentary dense clump associated with NGC 3576. Results: Combining our 450-micron observations with existing data at other wavelengths, we have identified seven massive protostellar sources along the NGC 3576 filament and placed them in the M_env - L_bol evolutionary diagram for protostars. Conclusions: Comparison with theoretical evolutionary tracks suggests that these seven protostellar sources will evolve into massive stars with masses M* ~ 15-50 Msun. Four sources are classified as candidate high-mass Class 0 objects, two sources as massive Class I objects, and one source appears to be at an intermediate stage. △ Less

Submitted 23 September, 2008; originally announced September 2008.

Comments: 9 pages, 2 figures + 2 online figures, 2 online tables. Accepted for publication in A&A (Letters)

The Herschel/PACS 2560 bolometers imaging camera

Authors: Nicolas Billot, Patrick Agnese, Jean-Louis Augueres, Alain Beguin, Andre Bouere, Olivier Boulade, Christophe Cara, Christelle Cloue, Eric Doumayrou, Lionel Duband, Benoit Horeau, Isabelle Le Mer, Jean Le Pennec, Jerome Martignac, Koryo Okumura, Vincent Reveret, Marc Sauvage, Francois Simoens, Laurent Vigroux

Abstract: The development program of the flight model imaging camera for the PACS instrument on-board the Herschel spacecraft is nearing completion. This camera has two channels covering the 60 to 210 microns wavelength range. The focal plane of the short wavelength channel is made of a mosaic of 2x4 3-sides buttable bolometer arrays (16x16 pixels each) for a total of 2048 pixels, while the long wavelengt… ▽ More The development program of the flight model imaging camera for the PACS instrument on-board the Herschel spacecraft is nearing completion. This camera has two channels covering the 60 to 210 microns wavelength range. The focal plane of the short wavelength channel is made of a mosaic of 2x4 3-sides buttable bolometer arrays (16x16 pixels each) for a total of 2048 pixels, while the long wavelength channel has a mosaic of 2 of the same bolometer arrays for a total of 512 pixels. The 10 arrays have been fabricated, individually tested and integrated in the photometer. They represent the first filled arrays of fully collectively built bolometers with a cold multiplexed readout, allowing for a properly sampled coverage of the full instrument field of view. The camera has been fully characterized and the ground calibration campaign will take place after its delivery to the PACS consortium in mid 2006. The bolometers, working at a temperature of 300 mK, have a NEP close to the BLIP limit and an optical bandwidth of 4 to 5 Hz that will permit the map** of large sky areas. This paper briefly presents the concept and technology of the detectors as well as the cryocooler and the warm electronics. Then we focus on the performances of the integrated focal planes (responsivity, NEP, low frequency noise, bandwidth). △ Less

Submitted 26 June, 2006; originally announced June 2006.

Comments: 12 pages, 14 figures. To appear in Proc. SPIE 6265, "Space Telescopes and Instrumentation I", 2006 May 24-31, Orlando, Florida USA (6265-11). Higher resolution of the article available on demand (email nbillot at cea.fr)

Recent Achievements on the development of the Herschel/PACS Bolometer arrays

Authors: N. Billot, P. Agnese, O. Boulade, C. Cigna, E. Doumeyrou, B. Horeau, J. Lepennec, J. Martignac, J. -L. Pornin, V. Reveret, L. Rodriguez, M. Sauvage, F. Simoens, L. Vigroux

Abstract: A new type of bolometer arrays sensitive in the Far Infrared and Submillimeter range has been developped and manufactured by CEA/LETI/SLIR and will be integrated in the PACS instrument onboard the Herschel Space Observatory (launch date 2008). The main innovations are their collective manufacturing technique (production of 3-side buttable 16x16 arrays) and their high map** efficiency (large fo… ▽ More A new type of bolometer arrays sensitive in the Far Infrared and Submillimeter range has been developped and manufactured by CEA/LETI/SLIR and will be integrated in the PACS instrument onboard the Herschel Space Observatory (launch date 2008). The main innovations are their collective manufacturing technique (production of 3-side buttable 16x16 arrays) and their high map** efficiency (large format detector and instantaneous Nyquist sampling). Their measured NEP is 2x10^-16 W/Hz^-0.5 and their thermometric passband about 4-5 Hz. In this paper we describe CEA bolometers and present the results obtained during the last test campaign. △ Less

Submitted 3 March, 2006; originally announced March 2006.

Comments: Proccedings of the 'Beaune 2005: New Developement In Photodetection International Conference' submitted to NIM section A

Journal ref: Nucl.Instrum.Meth. A567 (2006) 137-139

SIMBOL-X, a formation flying-mission for hard X-ray astrophysics

Authors: P. Ferrando, A. Goldwurm, P. Laurent, O. Limousin, J. Martignac, F. Pinsard, Y. Rio, J. P. Roques, O. Citterio, G. Pareschi, G. Tagliaferri, F. Fiore, G. Malaguti, U. Briel, G. Hasinger, L. Strueder

Abstract: SIMBOL-X is a hard X-ray mission, operating in the ~ 0.5-70 keV range, which is proposed by a consortium of European laboratories in response to the 2004 call for ideas of CNES for a scientific mission to be flown on a formation flying demonstrator. Relying on two spacecrafts in a formation flying configuration, SIMBOL-X uses for the first time a ~ 30 m focal length X-ray mirror to focus X-rays… ▽ More SIMBOL-X is a hard X-ray mission, operating in the ~ 0.5-70 keV range, which is proposed by a consortium of European laboratories in response to the 2004 call for ideas of CNES for a scientific mission to be flown on a formation flying demonstrator. Relying on two spacecrafts in a formation flying configuration, SIMBOL-X uses for the first time a ~ 30 m focal length X-ray mirror to focus X-rays with energy above 10 keV, resulting in a two orders of magnitude improvement in angular resolution and sensitivity in the hard X-ray range with respect to non focusing techniques. The SIMBOL-X revolutionary instrumental capabilities will allow to elucidate outstanding questions in high energy astrophysics, related in particular to the physics of accretion onto compact objects, to the acceleration of particles to the highest energies, and to the nature of the Cosmic X-Ray background. The mission, which has gone through a thorough assessment study performed by CNES, is expected to start a competitive phase A in autumn 2005, leading to a flight decision at the end of 2006, for a launch in 2012. The mission science objectives, the current status of the instrumentation and mission design, as well as potential trade-offs are presented in this paper. △ Less

Submitted 31 August, 2005; originally announced August 2005.

Comments: 10 pages; Proc. of SPIE conference "Optics for EUV, X-Ray, and Gamma-Ray Astronomy II", San Diego July 31st-Aug.4th, 2005, Vol. 5900