-
Defects induce phase transition from dynamic to static rippling in graphene
Authors:
Fabian L. Thiemann,
Camille Scalliet,
Erich A. Müller,
Angelos Michaelides
Abstract:
Many of graphene's remarkable properties are intrinsically linked to its inherent ripples. Defects, whether naturally present or artificially introduced, are known to have a strong impact on the rippling of graphene. However, how defects alter ripple dynamics in two-dimensional (2D) materials in general, and graphene in particular, remains largely unexplored. Here, using machine learning-driven mo…
▽ More
Many of graphene's remarkable properties are intrinsically linked to its inherent ripples. Defects, whether naturally present or artificially introduced, are known to have a strong impact on the rippling of graphene. However, how defects alter ripple dynamics in two-dimensional (2D) materials in general, and graphene in particular, remains largely unexplored. Here, using machine learning-driven molecular dynamics simulations, we reveal a fundamental connection between defect concentration and ripple dynamics in freestanding graphene sheets. Specifically, we find that at a critical concentration of approximately 0.1%, dynamic rippling undergoes a transition from freely propagating to static ripples. This is in quantitative alignment with the experimentally observed turning point in the non-monotonic scaling of the Young's modulus and emphasises the critical interplay between defects and material dynamics. Our work not only unveils the significant impact of defects on rippling dynamics in graphene but also paves the way to design two-dimensional devices with tailored properties.
△ Less
Submitted 7 June, 2024;
originally announced June 2024.
-
Water flow in single-wall nanotubes: Oxygen makes it slip, hydrogen makes it stick
Authors:
Fabian L Thiemann,
Christoph Schran,
Patrick Rowe,
Erich A Müller,
Angelos Michaelides
Abstract:
Experimental measurements have reported ultra-fast and radius-dependent water transport in carbon nanotubes which are absent in boron nitride nanotubes. Despite considerable effort, the origin of this contrasting (and fascinating) behaviour is not understood. Here, with the aid of machine learning-based molecular dynamics simulations that deliver first-principles accuracy, we investigate water tra…
▽ More
Experimental measurements have reported ultra-fast and radius-dependent water transport in carbon nanotubes which are absent in boron nitride nanotubes. Despite considerable effort, the origin of this contrasting (and fascinating) behaviour is not understood. Here, with the aid of machine learning-based molecular dynamics simulations that deliver first-principles accuracy, we investigate water transport in single-wall carbon and boron nitride nanotubes. Our simulations reveal a large, radius-dependent hydrodynamic slippage on both materials with water experiencing indeed a $\approx 5$ times lower friction on carbon surfaces compared to boron nitride. Analysis of the diffusion mechanisms across the two materials reveals that the fast water transport on carbon is governed by facile oxygen motion, whereas the higher friction on boron nitride arises from specific hydrogen-nitrogen interactions. This work not only delivers a clear reference of unprecedented accuracy for water flow in single-wall nanotubes, but also provides detailed mechanistic insight into its radius and material dependence for future technological application.
△ Less
Submitted 10 February, 2022;
originally announced February 2022.
-
Radial Distribution of the Dust Comae of Comets 45P/Honda-Mrkos-Pajduusáková and 46P/Wirtanen
Authors:
C. Lejoly,
W. Harris,
N. Samarasinha,
B. E. A. Mueller,
E. Howell,
J. Bodnarik,
A. Springmann,
T. Kareta,
B. Sharkey,
J. Noonan,
L. R. Bedin,
J. -G. Bosch,
A. Brosio,
E. Bryssinck,
J. -B. de Vanssay,
F. -J. Hambsch,
O. Ivanova,
V. Krushinsky,
Z. -Y. Lin,
F. Manzini,
A. Maury,
N. Moriya,
P. Ochner,
V. Oldani
Abstract:
There was an unprecedented opportunity to study the inner dust coma environment, where the dust and gas are not entirely decoupled, of comets 45P/Honda-Mrkos-Pajduusáková (45P/HMP) from Dec. 26, 2016 - Mar. 15, 2017, and 46P/Wirtanen from Nov. 10, 2018 - Feb. 13, 2019, both in visible wavelengths. The radial profile slopes of these comets were measured in the R and HB-BC filters most representativ…
▽ More
There was an unprecedented opportunity to study the inner dust coma environment, where the dust and gas are not entirely decoupled, of comets 45P/Honda-Mrkos-Pajduusáková (45P/HMP) from Dec. 26, 2016 - Mar. 15, 2017, and 46P/Wirtanen from Nov. 10, 2018 - Feb. 13, 2019, both in visible wavelengths. The radial profile slopes of these comets were measured in the R and HB-BC filters most representative of dust, and deviations from a radially expanding coma were identified as significant. The azimuthally averaged radial profile slope of comet 45P/HMP gradually changes from -1.81 $\pm$ 0.20 at 5.24 days pre-perihelion to -0.35 $\pm$ 0.16 at 74.41 days post perihelion. Contrastingly, the radial profile slope of 46P/Wirtanen stays fairly constant over the observed time period at -1.05 $\pm$ 0.05. Additionally, we find that the radial profile of 46P/Wirtanen is azimuthally dependent on the skyplane-projected solar position angle, while that of 45P/HMP is not. These results suggest that comet 45P/HMP and 46P/Wirtanen have vastly different coma dust environments and that their dust properties are distinct. As evident from these two comets, well-resolved inner comae are vital for detailed characterization of dust environments.
△ Less
Submitted 20 December, 2021;
originally announced December 2021.
-
Repeating gas ejection events from comet 45P/Honda-Mrkos-Pajdušáková
Authors:
Alessondra Springmann,
Walter M. Harris,
Erin L. Ryan,
Cassandra Lejoly,
Ellen S. Howell,
Beatrice E. A. Mueller,
Nalin H. Samarasinha,
Laura M. Woodney,
Jordan K. Steckloff
Abstract:
Studying materials released from Jupiter-family comets (JFCs) -- as seen in their inner comæ, the envelope of gas and dust that forms as the comet approaches the Sun -- improves the understanding of their origin and evolutionary history. As part of a coordinated, multi-wavelength observing campaign, we observed comet 45P/Honda-Mrkos-Pajdušáková during its close approach to Earth in February 2017.…
▽ More
Studying materials released from Jupiter-family comets (JFCs) -- as seen in their inner comæ, the envelope of gas and dust that forms as the comet approaches the Sun -- improves the understanding of their origin and evolutionary history. As part of a coordinated, multi-wavelength observing campaign, we observed comet 45P/Honda-Mrkos-Pajdušáková during its close approach to Earth in February 2017. Narrowband observations were taken using the Bok 90" telescope at Kitt Peak National Observatory on February 16 and 17 UT, revealing gas and dust structures. We observed different jet directions for different volatile species, implying source region heterogeneity, consistent with other ground-based and \textit{in situ} observations of other comet nuclei. A repeating feature visible in CN and C$_2$ images on February 16 was also observed on February 17 with an interval of $7.6\pm0.1$ hours, consistent with the rotation period of the comet derived from Arecibo Observatory radar observations. The repeating feature's projected gas velocity away from the nucleus is 0.8 km s$^{-1}$, with an expansion velocity of 0.5 km s$^{-1}$. A bright compact spot adjacent to the nucleus provides a lower limit of the amount of material released in one cycle of $\sim$9.2 kg, depending on composition -- a quantity small enough to be produced by repeated exposure of nucleus ices to sunlight. This repeating CN jet, forming within 400 km of the nucleus, may be typical of inner coma behavior in JFCs; however, similar features could be obscured by other processes and daughter product species when viewed from distances further than the scale length of CN molecules.
△ Less
Submitted 28 November, 2021; v1 submitted 21 July, 2021;
originally announced July 2021.
-
Defect-Dependent Corrugation in Graphene
Authors:
Fabian L. Thiemann,
Patrick Rowe,
Andrea Zen,
Erich A. Müller,
Angelos Michaelides
Abstract:
Graphene's intrinsically corrugated and wrinkled topology fundamentally influences its electronic, mechanical, and chemical properties. Experimental techniques allow the manipulation of pristine graphene and the controlled production of defects which allows to control the atomic out-of-plane fluctuations and, thus, tune graphene's properties. Here, we perform large scale machine learning-driven mo…
▽ More
Graphene's intrinsically corrugated and wrinkled topology fundamentally influences its electronic, mechanical, and chemical properties. Experimental techniques allow the manipulation of pristine graphene and the controlled production of defects which allows to control the atomic out-of-plane fluctuations and, thus, tune graphene's properties. Here, we perform large scale machine learning-driven molecular dynamics simulations to understand the impact of defects on the structure of graphene. We find that defects cause significantly higher corrugation leading to a strongly wrinkled surface. The magnitude of this structural transformation strongly depends on the defect concentration and specific type of defect. Analysing the atomic neighborhood of the defects reveals that the extent of these morphological changes depends on the preferred geometrical orientation and the interactions between defects. While our work highlights that defects can strongly affect graphene's morphology, it also emphasises the differences between distinct types by linking the global structure to the local environment of the defects.
△ Less
Submitted 14 September, 2021; v1 submitted 2 July, 2021;
originally announced July 2021.
-
Machine learning potentials for complex aqueous systems made simple
Authors:
Christoph Schran,
Fabian L. Thiemann,
Patrick Rowe,
Erich A. Müller,
Ondrej Marsalek,
Angelos Michaelides
Abstract:
Simulation techniques based on accurate and efficient representations of potential energy surfaces are urgently needed for the understanding of complex aqueous systems such as solid-liquid interfaces. Here, we present a machine learning framework that enables the efficient development and validation of models for complex aqueous systems. Instead of trying to deliver a globally-optimal machine lear…
▽ More
Simulation techniques based on accurate and efficient representations of potential energy surfaces are urgently needed for the understanding of complex aqueous systems such as solid-liquid interfaces. Here, we present a machine learning framework that enables the efficient development and validation of models for complex aqueous systems. Instead of trying to deliver a globally-optimal machine learning potential, we propose to develop models applicable to specific thermodynamic state points in a simple and user-friendly process. After an initial ab initio simulation, a machine learning potential is constructed with minimum human effort through a data-driven active learning protocol. Such models can afterwards be applied in exhaustive simulations to provide reliable answers for the scientific question at hand. We showcase this methodology on a diverse set of aqueous systems with increasing degrees of complexity. The systems chosen here comprise bulk water with different ions in solution, water on a titanium dioxide surface, as well as water confined in nanotubes and between molybdenum disulfide sheets. Highlighting the accuracy of our approach with respect to the underlying ab initio reference, the resulting models are evaluated in detail with an automated validation protocol that includes structural and dynamical properties and the precision of the force prediction of the models. Finally, we demonstrate the capabilities of our approach for the description of water on the rutile titanium dioxide (110) surface to analyze the structure and mobility of water on this surface. Such machine learning models provide a straightforward and uncomplicated but accurate extension of simulation time and length scales for complex systems.
△ Less
Submitted 14 September, 2021; v1 submitted 31 May, 2021;
originally announced June 2021.
-
Generating a Machine-learned Equation of State for Fluid Properties
Authors:
Kezheng Zhu,
Erich A. Müller
Abstract:
Equations of State (EoS) for fluids have been a staple of engineering design and practice for over a century. Available EoS are based on the fitting of a closed-form analytical expression to suitable experimental data. The underlying mathematical structure and the underlying physical model significantly restrain the applicability and accuracy of the resulting EoS. This contribution explores the is…
▽ More
Equations of State (EoS) for fluids have been a staple of engineering design and practice for over a century. Available EoS are based on the fitting of a closed-form analytical expression to suitable experimental data. The underlying mathematical structure and the underlying physical model significantly restrain the applicability and accuracy of the resulting EoS. This contribution explores the issues surrounding the substitution of analytical EoS for machine-learned models, in particular, we describe, as a proof of concept, the effectiveness of a machine-learned model to replicate statistical associating fluid theory (SAFT-VR-Mie) EoS for pure fluids. By utilizing Artificial Neural Network and Gaussian Process Regression, predictions of thermodynamic properties such as critical pressure and temperature, vapor pressures and densities of pure model fluids are performed based on molecular descriptors. To quantify the effectiveness of the Machine Learning techniques, a large data set is constructed using the comparisons between the Machine-Learned EoS and the surrogate data set suggest that the proposed approach shows promise as a viable technique for the correlation, extrapolation and prediction of thermophysical properties of fluids.
△ Less
Submitted 29 July, 2020;
originally announced July 2020.
-
Machine Learning Potential for Hexagonal Boron Nitride Applied to Thermally and Mechanically Induced Rippling
Authors:
Fabian L. Thiemann,
Patrick Rowe,
Erich A. Müller,
Angelos Michaelides
Abstract:
We introduce an interatomic potential for hexagonal boron nitride (hBN) based on the Gaussian approximation potential (GAP) machine learning methodology. The potential is based on a training set of configurations collected from density functional theory (DFT) simulations and is capable of treating bulk and multilayer hBN as well as nanotubes of arbitrary chirality. The developed force field faithf…
▽ More
We introduce an interatomic potential for hexagonal boron nitride (hBN) based on the Gaussian approximation potential (GAP) machine learning methodology. The potential is based on a training set of configurations collected from density functional theory (DFT) simulations and is capable of treating bulk and multilayer hBN as well as nanotubes of arbitrary chirality. The developed force field faithfully reproduces the potential energy surface predicted by DFT while improving the efficiency by several orders of magnitude. We test our potential by comparing formation energies, geometrical properties, phonon dispersion spectra and mechanical properties with respect to benchmark DFT calculations and experiments. In addition, we use our model and a recently developed graphene-GAP to analyse and compare thermally and mechanically induced rippling in large scale two-dimensional (2D) hBN and graphene. Both materials show almost identical scaling behaviour with an exponent of $η\approx 0.85$ for the height fluctuations agreeing well with the theory of flexible membranes. Based on its lower resistance to bending, however, hBN experiences slightly larger out-of-plane deviations both at zero and finite applied external strain. Upon compression a phase transition from incoherent ripple motion to soliton-ripples is observed for both materials. Our potential is freely available online at [http://www.libatoms.org].
△ Less
Submitted 4 October, 2020; v1 submitted 22 July, 2020;
originally announced July 2020.
-
Spreading of aqueous droplets with common and superspreading surfactants. A molecular dynamics study
Authors:
Panagiotis E. Theodorakis,
Edward R. Smith,
Erich A. Müller
Abstract:
The surfactant-driven spreading of droplets is an essential process in many applications ranging from coating flow technology to enhanced oil recovery. Despite the significant advancement in describing spreading processes in surfactant-laden droplets, including the exciting phenomena of superspreading, many features of the underlying mechanisms require further understanding. Here, we have carried…
▽ More
The surfactant-driven spreading of droplets is an essential process in many applications ranging from coating flow technology to enhanced oil recovery. Despite the significant advancement in describing spreading processes in surfactant-laden droplets, including the exciting phenomena of superspreading, many features of the underlying mechanisms require further understanding. Here, we have carried out molecular dynamics simulations of a coarse-grained model with a force-field obtained from the statistical associating fluid theory to study droplets laden with common and superspreading surfactants. We have confirmed the important elements of the superspreading mechanism, i.e. the adsorption of surfactant at the contact line and the fast replenishment of surfactant from the bulk. Through a detailed comparison of a range of droplets with different surfactants, our analysis has indicated that the ability of surfactant to adsorb at the interfaces is the key feature of the superspreading mechanism. To this end, surfactants that tend to form aggregates and have a strong hydrophobic attraction in the aggregated cores prevent the fast replenishment of the interfaces, resulting in reduced spreading ability. We also show that various surfactant properties, such as diffusion and architecture, play a secondary role in the spreading process. Moreover, we discuss various drop properties such as the height, contact angle, and surfactant surface concentration, highlighting differences between superspreading and common surfactants. We anticipate that our study will provide further insight for applications requiring the control of wetting.
△ Less
Submitted 2 September, 2019;
originally announced September 2019.
-
Transport Properties of Water Confined in a Graphene Nanochannel
Authors:
Frederike Jaeger,
Omar K. Matar,
Erich A. Müller
Abstract:
Equilibrium molecular dynamics simulations are used to investigate the effect of phase transitions on the transport properties of highly-confined water between parallel graphene sheets. An abrupt reduction by several orders of magnitude in the mobility of water is observed in strong confinement, as indicated by reduced diffusivity and increased shear viscosity values. The bulk viscosity, which is…
▽ More
Equilibrium molecular dynamics simulations are used to investigate the effect of phase transitions on the transport properties of highly-confined water between parallel graphene sheets. An abrupt reduction by several orders of magnitude in the mobility of water is observed in strong confinement, as indicated by reduced diffusivity and increased shear viscosity values. The bulk viscosity, which is related to the resistance to expansion and compression of a substance, is also calculated, showing an enhancement compared to the bulk value for all levels of confinement. An investigation into the phase behaviour of confined water reveals a transition from a liquid monolayer to a rhombic frozen monolayer at nanochannel heights between 6.8-7.8 Å; for larger separations, multilayer liquid water is recovered. It is shown how this phase transition is at the root of the impeded transport.
△ Less
Submitted 21 January, 2019;
originally announced January 2019.
-
Further investigation of changes in cometary rotation
Authors:
Beatrice E. A. Mueller,
Nalin H. Samarasinha
Abstract:
Samarasinha & Mueller (2013) related changes of cometary rotation to other physical parameters for four Jupiter family comets defining a parameter $X$, which is approximately constant within a factor of two irrespective of the active fraction of a comet. Two additional comets are added to this sample in this paper and the claim of a nearly constant parameter $X$ for these six comets is confirmed,…
▽ More
Samarasinha & Mueller (2013) related changes of cometary rotation to other physical parameters for four Jupiter family comets defining a parameter $X$, which is approximately constant within a factor of two irrespective of the active fraction of a comet. Two additional comets are added to this sample in this paper and the claim of a nearly constant parameter $X$ for these six comets is confirmed, albeit with a larger scatter. Taking the geometric mean of $X$ for all the comets above excluding 2P/Encke (as $X$ for each comet was determined with respect to that of 2P/Encke), the expected changes in the rotation periods for a sample of 24 periodic comets are derived. We identify comets from this sample that are most likely to show observationally detectable changes in their rotation periods. Using this sample and including the six comets used to determine $X$, we find a correlation between the parameter $ζ$ (i.e. the total water production per unit surface area per orbit approximated by that inside of 4 au) and the perihelion distance $q$; specifically we derive $ζ$ $\propto$ $q^{-0.8}$ and provide a theoretical basis for this in Appendix A. This relationship between $ζ$ and $q$ enables ready comparisons of activity due to insolation between comets. Additionally, a relationship between the nuclear radius $R$ and the rotation period $P$ is found. Specifically, we find that on average smaller nuclei have smaller rotation periods compared to the rotation periods of larger nuclei. This is consistent with expectations for rotational evolution and spin-up of comet nuclei, providing strong observational evidence for sublimation-driven rotational changes in comets.
△ Less
Submitted 28 June, 2018;
originally announced June 2018.
-
The Excited Spin State of 1I/2017 U1 `Oumuamua
Authors:
Michael J. S. Belton,
Olivier R. Hainaut,
Karen J. Meech,
Beatrice E. A. Mueller,
Jan T. Kleyna,
Harold A. Weaver,
Marc W. Buie,
Michał Drahus,
Piotr Guzik,
Richard J. Wainscoat,
Wacław Waniak,
Barbara Handzlik,
Sebastian Kurowski,
Siyi Xu,
Scott S. Sheppard,
Marco Micheli,
Harald Ebeling,
Jacqueline V. Keane
Abstract:
We show that `Oumuamua's excited spin could be in a high energy LAM state, which implies that its shape could be far from the highly elongated shape found in previous studies. CLEAN and ANOVA algorithms are used to analyze `Oumuamua's lightcurve using 818 observations over 29.3~days. Two fundamental periodicities are found at frequencies (2.77$\pm$0.11) and (6.42$\pm$0.18)~cycles/day, correspondin…
▽ More
We show that `Oumuamua's excited spin could be in a high energy LAM state, which implies that its shape could be far from the highly elongated shape found in previous studies. CLEAN and ANOVA algorithms are used to analyze `Oumuamua's lightcurve using 818 observations over 29.3~days. Two fundamental periodicities are found at frequencies (2.77$\pm$0.11) and (6.42$\pm$0.18)~cycles/day, corresponding to (8.67$\pm$0.34)~h and (3.74$\pm$0.11)~h, respectively. The phased data show that the lightcurve does not repeat in a simple manner, but approximately shows a double minimum at 2.77~cycles/day and a single minimum at 6.42~cycles/day. This is characteristic of an excited spin state. `Oumuamua could be spinning in either the long (LAM) or short (SAM) axis mode. For both, the long axis precesses around the total angular momentum vector with an average period of (8.67$\pm$0.34)~h. For the three LAMs we have found, the possible rotation periods around the long axis are 6.58, 13.15, or 54.48~h, with 54.48~h being the most likely. `Oumuamua may also be nutating with respective periods of half of these values. We have also found two possible SAM states where `Oumuamua oscillates around the long axis with possible periods at 13.15 and 54.48~h, the latter as the most likely. In this case any nutation will occur with the same periods. Determination of the spin state, the amplitude of the nutation, the direction of the TAMV, and the average total spin period may be possible with a direct model fit to the lightcurve. We find that `Oumuamua is "cigar-shaped"', if close to its lowest rotational energy, and an extremely oblate spheroid if close to its highest energy state for its total angular momentum.
△ Less
Submitted 10 April, 2018;
originally announced April 2018.
-
A multiscale method for simulating fluid interfaces covered with large molecules such as asphaltenes
Authors:
Åsmund Ervik,
Morten Olsen Lysgaard,
Carmelo Herdes,
Guadalupe Jiménez-Serratos,
Erich A. Müller,
Svend Tollak Munkejord,
Bernhard Müller
Abstract:
(Abbreviated) In this paper we report on the development of a multiscale method for simulating complex liquid-liquid systems such as water in contact with oil containing asphaltenes. We consider simulations where water drops covered with asphaltenes are deflated, and reproduce the crumpling observed in experiments. The method on the nanoscale is based on using coarse-grained molecular dynamics sim…
▽ More
(Abbreviated) In this paper we report on the development of a multiscale method for simulating complex liquid-liquid systems such as water in contact with oil containing asphaltenes. We consider simulations where water drops covered with asphaltenes are deflated, and reproduce the crumpling observed in experiments. The method on the nanoscale is based on using coarse-grained molecular dynamics simulations of the interface, with an accurate model for the asphaltene molecules. This enables the calculation of interfacial properties. These properties are then used in the macroscale simulation, which is performed with a two-phase incompressible flow solver using a novel hybrid level-set/ghost-fluid/immersed-boundary method for taking the complex interface behaviour into account. We validate both the nano- and macroscale methods. Results are presented from nano- and macroscale simulations which showcase some of the interesting behaviour caused by asphaltenes affecting the interface. The molecular simulations presented here are the first in the literature to obtain the correct interfacial orientation of asphaltenes. Results from the macroscale simulations present a new physical explanation of the crumpled drop phenomenon, while highlighting shortcomings in previous hypotheses.
△ Less
Submitted 17 January, 2018;
originally announced January 2018.
-
Orientational ordering and phase behaviour of a binary mixture of hard spheres and hard spherocylinders
Authors:
Liang Wu,
Alexandr Malijevský,
George Jackson,
Erich A. Müller,
Carlos Avendaño
Abstract:
We study structure and fluid-phase behaviour of a binary mixture of hard spheres (HSs) and hard spherocylinders (HSCs) in isotropic and nematic states using the $NP_nAT$ ensemble Monte Carlo (MC) method in which a normal pressure tensor component is fixed in a system confined between two hard walls. The method allows one to estimate the location of the isotropic-nematic phase transition and to obs…
▽ More
We study structure and fluid-phase behaviour of a binary mixture of hard spheres (HSs) and hard spherocylinders (HSCs) in isotropic and nematic states using the $NP_nAT$ ensemble Monte Carlo (MC) method in which a normal pressure tensor component is fixed in a system confined between two hard walls. The method allows one to estimate the location of the isotropic-nematic phase transition and to observe the asymmetry in the composition between the coexisting phases, with the expected increase of the HSC concentration in the nematic phase. This is in stark contrast with the previously reported MC simulations where a conventional isotropic $NPT$ ensemble was used. We further compare the simulation results with the theoretical predictions of two analytic theories that extend the original Parsons-Lee theory using the one-fluid and the many-fluid approximation [Malijevský {\it at al} J. Chem. Phys. \textbf{129}, 144504 (2008)]. In the one-fluid version of the theory the properties of the mixture are mapped on an effective one-component HS system while in the many-fluid theory the components of the mixtures are represented as separate effective HS particles. The comparison reveals that both the one- and the many-fluid approaches provide a reasonably accurate quantitative description of the mixture including the predictions of the isotropic-nematic phase boundary and degree of orientational order of the HSC-HS mixtures.
△ Less
Submitted 16 August, 2015;
originally announced August 2015.
-
A Further Investigation of Apparent Periodicities and the Rotational State of Comet 103P/Hartley 2 from Combined Coma Morphology and Lightcurve Datasets
Authors:
Matthew M. Knight,
Beatrice E. A. Mueller,
Nalin H. Samarasinha,
David G. Schleicher
Abstract:
We present an analysis of Kitt Peak National Observatory and Lowell Observatory observations of comet 103P/Hartley 2 obtained from August through December 2010. The results are then compared with contemporaneous observations made by the EPOXI spacecraft. Each ground-based dataset has previously been investigated individually; the combined dataset has complementary coverage that reduces the time be…
▽ More
We present an analysis of Kitt Peak National Observatory and Lowell Observatory observations of comet 103P/Hartley 2 obtained from August through December 2010. The results are then compared with contemporaneous observations made by the EPOXI spacecraft. Each ground-based dataset has previously been investigated individually; the combined dataset has complementary coverage that reduces the time between observing runs and allows us to determine additional apparent periods at intermediate times. We compare CN coma morphology between ground-based datasets, making nine new measurements of apparent periods. The first five are consistent with the roughly linearly increasing apparent period during the apparition found by previous authors. The final four suggest that the change in apparent period slowed or stopped by late November. We also measure an inner coma lightcurve in both CN and R-band ground-based images, finding a single-peaked lightcurve which repeats in phase with the coma morphology. The apparent period from the lightcurve had significantly larger uncertainties than from the coma morphology, but varied over the apparition in a similar manner. Our ground-based lightcurve aligns with the published EPOXI lightcurve, indicating that the lightcurve represents changing activity rather than viewing geometry of structures in the coma. The EPOXI lightcurve can best be phased by a triple-peaked period near 54-55 hr that increases from October to November. This phasing reveals that the spacing between maxima is not constant, and that the overall lightcurve shape evolves from one triple-peaked cycle to the next. These behaviors suggest that much of the scatter in apparent periods derived from ground-based datasets acquired at similar epochs are likely due to limited sampling of the data.
△ Less
Submitted 12 May, 2015;
originally announced May 2015.
-
Component periods of non-principal-axis rotation and their manifestations in the lightcurves of asteroids and bare cometary nuclei
Authors:
Nalin H. Samarasinha,
Beatrice E. A. Mueller
Abstract:
Lightcurve observations of asteroids and bare cometary nuclei are the most widely used observational tool to derive the rotational parameters. Therefore, an in-depth understanding of how component periods of dynamically excited non-principal axis (NPA) rotators manifest in lightcurves is a crucial step in this process. We investigated this with the help of numerically generated lightcurves of NPA…
▽ More
Lightcurve observations of asteroids and bare cometary nuclei are the most widely used observational tool to derive the rotational parameters. Therefore, an in-depth understanding of how component periods of dynamically excited non-principal axis (NPA) rotators manifest in lightcurves is a crucial step in this process. We investigated this with the help of numerically generated lightcurves of NPA rotators with component periods known a priori. The component periods of NPA rotation were defined in terms of two widely used yet complementary conventions. We derive the relationships correlating the component rotation periods in the two conventions. These relationships were then used to interpret the periodicity signatures present in the simulated lightcurves and rationalize them in either convention.
△ Less
Submitted 2 December, 2014; v1 submitted 31 October, 2014;
originally announced November 2014.
-
Nano-spectroscopic imaging of intermolecular structure, coupling and dynamics
Authors:
Benjamin Pollard,
Eric A. Muller,
Karsten Hinrichs,
Markus B. Raschke
Abstract:
Molecular self-assembly, the function of biomembranes, and the performance of organic solar cells rely on molecular interactions on the nanoscale. The understanding and design of such intrinsic or engineered heterogeneous functional soft matter has long been impeded by a lack of spectroscopic tools with sufficient nanometer spatial resolution, attomolar sensitivity, and intermolecular spectroscopi…
▽ More
Molecular self-assembly, the function of biomembranes, and the performance of organic solar cells rely on molecular interactions on the nanoscale. The understanding and design of such intrinsic or engineered heterogeneous functional soft matter has long been impeded by a lack of spectroscopic tools with sufficient nanometer spatial resolution, attomolar sensitivity, and intermolecular spectroscopic specificity. We implement vibrational scattering-scanning near-field optical microscopy ($s$-SNOM) in a multi-spectral modality with unprecedented spectral precision to investigate the structure-function relationship in nano-phase separated block-copolymers. We use a vibrational resonance as a sensitive reporter of the local chemical environment and resolve, with few nanometer spatial resolution and 0.2 cm$^{-1}$ spectral precision, spectral Stark shifts and line broadening correlated with molecular-scale morphologies. By creating images of solvatochromic vibrational shifts we discriminate local variations in electric fields between the core and interface regions of the nano-domains with quantitative agreement to dielectric continuum models. This new nano-chemometric ability to directly resolve nanoscale morphology and associated intermolecular interactions can form a basis for the systematic control of functionality in multicomponent soft matter systems.
△ Less
Submitted 25 December, 2013;
originally announced December 2013.
-
Evidence for the role of fluctuations in the thermodynamics of nanoscale drops and the implications in computations of the surface tension
Authors:
Jose G. Sampayo,
Alexandr Malijevsky,
Erich A. Muller,
E. de Miguel,
G. Jackson
Abstract:
Test area deformations are used to analyse vapour-liquid interfaces of Lennard-Jones particles by molecular dynamics simulation. For planar vapour-liquid interfaces the change in free energy is captured by the average of the corresponding change in energy, the leading-order contribution. This is consistent with the commonly used mechanical (pressure tensor) route for the surface tension. By contra…
▽ More
Test area deformations are used to analyse vapour-liquid interfaces of Lennard-Jones particles by molecular dynamics simulation. For planar vapour-liquid interfaces the change in free energy is captured by the average of the corresponding change in energy, the leading-order contribution. This is consistent with the commonly used mechanical (pressure tensor) route for the surface tension. By contrast for liquid drops one finds a large second-order contribution associated with fluctuations in energy. Both the first- and second-order terms make comparable contributions, invalidating the mechanical relation for the surface tension of small drops. The latter is seen to increase above the planar value for drop radii of ~8 particle diameters, followed by an apparent weak maximum and slow decay to the planar limit, consistent with a small negative Tolman length.
△ Less
Submitted 9 November, 2012;
originally announced November 2012.
-
Static and dynamic properties of curved vapour-liquid interfaces by massively parallel molecular dynamics simulation
Authors:
Martin T. Horsch,
Svetlana K. Miroshnichenko,
Jadran Vrabec,
Colin W. Glass,
Christoph Niethammer,
Martin F. Bernreuther,
Erich A. Müller,
George Jackson
Abstract:
Curved fluid interfaces are investigated on the nanometre length scale by molecular dynamics simulation. Thereby, droplets surrounded by a metastable vapour phase are stabilized in the canonical ensemble. Analogous simulations are conducted for cylindrical menisci separating vapour and liquid phases under confinement in planar nanopores. Regarding the emergence of nanodroplets during nucleation, a…
▽ More
Curved fluid interfaces are investigated on the nanometre length scale by molecular dynamics simulation. Thereby, droplets surrounded by a metastable vapour phase are stabilized in the canonical ensemble. Analogous simulations are conducted for cylindrical menisci separating vapour and liquid phases under confinement in planar nanopores. Regarding the emergence of nanodroplets during nucleation, a non-equilibrium phenomenon, both the non-steady dynamics of condensation processes and stationary quantities related to supersaturated vapours are considered. Results for the truncated and shifted Lennard-Jones fluid and for mixtures of quadrupolar fluids confirm the applicability of the capillarity approximation and the classical nucleation theory.
△ Less
Submitted 20 October, 2011;
originally announced October 2011.
-
The excess equimolar radius of liquid drops
Authors:
Martin Horsch,
Hans Hasse,
Alexander K. Shchekin,
Animesh Agarwal,
Stefan Eckelsbach,
Jadran Vrabec,
Erich A. Müller,
George Jackson
Abstract:
The curvature dependence of the surface tension is related to the excess equimolar radius of liquid drops, i.e., the deviation of the equimolar radius from that defined with the macroscopic capillarity approximation. Based on the Tolman [J. Chem. Phys. 17, 333 (1949)] approach and its interpretation by Nijmeijer et al. [J. Chem. Phys. 96, 565 (1991)], the surface tension of spherical interfaces is…
▽ More
The curvature dependence of the surface tension is related to the excess equimolar radius of liquid drops, i.e., the deviation of the equimolar radius from that defined with the macroscopic capillarity approximation. Based on the Tolman [J. Chem. Phys. 17, 333 (1949)] approach and its interpretation by Nijmeijer et al. [J. Chem. Phys. 96, 565 (1991)], the surface tension of spherical interfaces is analysed in terms of the pressure difference due to curvature. In the present study, the excess equimolar radius, which can be obtained directly from the density profile, is used instead of the Tolman length. Liquid drops of the truncated-shifted Lennard-Jones fluid are investigated by molecular dynamics simulation in the canonical ensemble, with equimolar radii ranging from 4 to 33 times the Lennard-Jones size parameter sigma. In these simulations, the magnitudes of the excess equimolar radius and the Tolman length are shown to be smaller than sigma/2. Other methodical approaches, from which mutually contradicting findings have been reported, are critically discussed, outlining possible sources of inaccuracy.
△ Less
Submitted 22 September, 2011; v1 submitted 11 May, 2011;
originally announced May 2011.
-
Rotation of Comet Hartley 2 from Structures in the Coma
Authors:
Nalin H. Samarasinha,
Beatrice E. A. Mueller,
Michael F. A'Hearn,
Tony L. Farnham,
Alan Gersch
Abstract:
The CN coma structure of the EPOXI mission target, comet 103P/Hartley 2, was observed during twenty nights from September to December 2010. These CN images probe the rotational state of the comet's nucleus and provide a ground-based observational context to complement the EPOXI observations. A dynamically excited cometary nucleus with a changing rotational rate is observed, a characteristic not se…
▽ More
The CN coma structure of the EPOXI mission target, comet 103P/Hartley 2, was observed during twenty nights from September to December 2010. These CN images probe the rotational state of the comet's nucleus and provide a ground-based observational context to complement the EPOXI observations. A dynamically excited cometary nucleus with a changing rotational rate is observed, a characteristic not seen in any comet in the past. The lack of rotational dam** during the four-month observing interval places constraints on the interior structure of the nucleus.
△ Less
Submitted 24 April, 2011;
originally announced April 2011.