-
Bloch-Floquet band gaps for water waves over a periodic bottom
Authors:
Christophe Lacave,
Matthieu Ménard,
Catherine Sulem
Abstract:
A central object in the analysis of the water wave problem is the Dirichlet-Neumann operator. This paper is devoted to the study of its spectrum in the context of the water wave system linearized near equilibrium in a domain with a variable bottom, assumed to be a $C^2$ periodic function. We use the analyticity of the Dirichlet-Neumann operator with respect to the bottom variation and combine it w…
▽ More
A central object in the analysis of the water wave problem is the Dirichlet-Neumann operator. This paper is devoted to the study of its spectrum in the context of the water wave system linearized near equilibrium in a domain with a variable bottom, assumed to be a $C^2$ periodic function. We use the analyticity of the Dirichlet-Neumann operator with respect to the bottom variation and combine it with general properties of elliptic systems and spectral theory for self-adjoint operators to develop a Bloch-Floquet theory and describe the structure of its spectrum. We find that under some conditions on the bottom variations, the spectrum is composed of bands separated by gaps, with explicit formulas for their sizes and locations.
△ Less
Submitted 29 February, 2024;
originally announced March 2024.
-
Mean-Field Limit of Point Vortices for the Lake Equations
Authors:
Matthieu Ménard
Abstract:
In this paper we study the mean-field limit of a system of point vortices for the lake equations. These equations model the evolution of the horizontal component of the velocity field of a fluid in a lake of non-constant depth, when its vertical component can be neglected. As for the axisymmetric Euler equations there are non-trivial self interactions of the vortices consisting in the leading ord…
▽ More
In this paper we study the mean-field limit of a system of point vortices for the lake equations. These equations model the evolution of the horizontal component of the velocity field of a fluid in a lake of non-constant depth, when its vertical component can be neglected. As for the axisymmetric Euler equations there are non-trivial self interactions of the vortices consisting in the leading order of a transport term along the level sets of the depth function. If the self-interactions are negligible, we show that the system of point vortices converges to the lake equations as the number of points becomes very large. If the self-interactions are of order one, we show that it converges to a forced lake equations and if the self-interactions are predominant, then up to time rescaling we show that it converges to a transport equation.The proof is based on a modulated energy approach introduced by Duerinckx and Serfaty in (Duke Math. J., 2020) that we adapt to deal with the heterogeneity of the lake kernel.
△ Less
Submitted 19 September, 2023;
originally announced September 2023.
-
Mean-Field Limit Derivation of a Monokinetic Spray Model with Gyroscopic Effects
Authors:
Matthieu Ménard
Abstract:
In this paper we derive a two dimensional spray model with gyroscopic effects as the mean-field limit of a system modeling the interaction between an incompressible fluid and a finite number of solid particles. This spray model has been studied by Moussa and Sueur (Asymptotic Anal., 2013), in particular the mean-field limit was established in the case of $W^{1,\infty}$ interactions. First we prove…
▽ More
In this paper we derive a two dimensional spray model with gyroscopic effects as the mean-field limit of a system modeling the interaction between an incompressible fluid and a finite number of solid particles. This spray model has been studied by Moussa and Sueur (Asymptotic Anal., 2013), in particular the mean-field limit was established in the case of $W^{1,\infty}$ interactions. First we prove the local in time existence and uniqueness of strong solutions of a monokinetic version of the model with a fixed point method. Then we adapt the proof of Duerinckx and Serfaty (Duke Math. J., 2020) to establish the mean-field limit to the spray model in the monokinetic regime in the case of Coulomb interactions.
△ Less
Submitted 10 July, 2023; v1 submitted 5 April, 2022;
originally announced April 2022.
-
Accurate modeling and characterization of photothermal forces in optomechanics
Authors:
André G. Primo,
Cauê M. Kersul,
Rodrigo Benevides,
Natália C. Carvalho,
Michaël Ménard,
Newton C. Frateschi,
Pierre-Louis de Assis,
Gustavo S. Wiederhecker,
Thiago P. Mayer Alegre
Abstract:
Photothermal effects have been pointed out as prominent sources of forces in optomechanical systems, competing with the standard radiation pressure interactions. In this Article, we derive a novel and accurate model for the prediction of photothermal forces and establish how some previous proposals can be complemented to yield precise results. As a proof-of-concept, we perform numerical and experi…
▽ More
Photothermal effects have been pointed out as prominent sources of forces in optomechanical systems, competing with the standard radiation pressure interactions. In this Article, we derive a novel and accurate model for the prediction of photothermal forces and establish how some previous proposals can be complemented to yield precise results. As a proof-of-concept, we perform numerical and experimental tests on GaAs microdisks cavities and obtain striking agreement with our framework, revealing the importance of considering surface photothermal forces and the effects of multiple thermal modes in microphotonic devices.
△ Less
Submitted 7 July, 2021; v1 submitted 22 August, 2020;
originally announced August 2020.
-
High-Frequency GaAs Optomechanical Bullseye Resonator
Authors:
N. C. Carvalho,
R. Benevides,
M. Ménard,
G. S. Wiederhecker,
N. C. Frateschi,
T. P. Mayer Alegre
Abstract:
The integration of optomechanics and optoelectronics in a single device opens new possibilities for develo** information technologies and exploring fundamental phenomena. Gallium arsenide (GaAs) is a well-known material that can bridge the gap between the functionalities of optomechanical devices and optical gain media. Here, we experimentally demonstrate a high-frequency GaAs optomechanical res…
▽ More
The integration of optomechanics and optoelectronics in a single device opens new possibilities for develo** information technologies and exploring fundamental phenomena. Gallium arsenide (GaAs) is a well-known material that can bridge the gap between the functionalities of optomechanical devices and optical gain media. Here, we experimentally demonstrate a high-frequency GaAs optomechanical resonator with a ring-type bullseye geometry that is unprecedented in this platform. We measured mechanical modes up to 3.4 GHz with quality factors of 4000 (at 77 K) and optomechanical coupling rates up to 39 kHz at telecom wavelengths. Moreover, we investigated the material symmetry break due to elastic anisotropy and its impact on the mechanical mode spectrum. Finally, we assessed the temperature dependence of the mechanical losses and demonstrated the efficiency and anisotropy resilience of the bullseye anchor loss suppression, indicating that lower temperature operation may allow mechanical quality factors over $10^4$. Such characteristics are valuable for active optomechanics, coherent microwave-to-optics conversion via piezo-mechanics and other implementations of high-frequency oscillators in III-V materials.
△ Less
Submitted 23 October, 2020; v1 submitted 7 August, 2020;
originally announced August 2020.
-
Ar/Cl$_{2}$ etching of GaAs optomechanical microdisks fabricated with positive electroresist
Authors:
Rodrigo Benevides,
Michaël Ménard,
Gustavo S. Wiederhecker,
Thiago P. Mayer Alegre
Abstract:
A method to fabricate GaAs microcavities using only a soft mask with an electrolithographic pattern in an inductively coupled plasma etching is presented. A careful characterization of the fabrication process pinpointing the main routes for a smooth device sidewall is discussed. Using the final recipe, optomechanical microdisk resonators are fabricated. The results show a very high optical quality…
▽ More
A method to fabricate GaAs microcavities using only a soft mask with an electrolithographic pattern in an inductively coupled plasma etching is presented. A careful characterization of the fabrication process pinpointing the main routes for a smooth device sidewall is discussed. Using the final recipe, optomechanical microdisk resonators are fabricated. The results show a very high optical quality factors of $Q_\text{opt}>2\times 10^{5}$, among the largest already reported for dry-etching devices. The final devices are also shown to present high mechanical quality factors and an optomechanical vacuum coupling constant of $g_{0}=2π\times 13.6$ kHz enabling self-sustainable mechanical oscillations for an optical input power above $1$ mW.
△ Less
Submitted 15 September, 2019;
originally announced September 2019.
-
Waveguide-based single-shot temporal cross-correlator
Authors:
Moti Fridman,
Yoshitomo Okawachi,
Stephane Clemmen,
Michael Menard,
Michal Lipson,
Alexander L. Gaeta
Abstract:
We describe a novel technique for performing a single-shot optical cross-correlation in nanowaveguides. Our scheme is based on four-wave mixing between two orthogonally polarized input signals propagating with different velocities due to polarization mode dispersion. The cross-correlation is determined by measuring the spectrum of the idler wave generated by the four-wave mixing process.
We describe a novel technique for performing a single-shot optical cross-correlation in nanowaveguides. Our scheme is based on four-wave mixing between two orthogonally polarized input signals propagating with different velocities due to polarization mode dispersion. The cross-correlation is determined by measuring the spectrum of the idler wave generated by the four-wave mixing process.
△ Less
Submitted 11 November, 2014;
originally announced November 2014.
-
A renormalization group analysis of the one-dimensional extended Hubbard model
Authors:
M. Ménard,
C. Bourbonnais
Abstract:
The phase diagram of the one-dimensional extended Hubbard model at half-filling is investigated by a weak coupling renormalization group method applicable beyond the usual continuum limit for the electron spectrum and coupling constants. We analyze the influence of irrelevant momentum dependent interactions on asymptotic properties of the correlation functions and the nature of dominant phases for…
▽ More
The phase diagram of the one-dimensional extended Hubbard model at half-filling is investigated by a weak coupling renormalization group method applicable beyond the usual continuum limit for the electron spectrum and coupling constants. We analyze the influence of irrelevant momentum dependent interactions on asymptotic properties of the correlation functions and the nature of dominant phases for the lattice model under study.
△ Less
Submitted 21 September, 2010;
originally announced September 2010.
-
Surface and Bulk Structural Properties of Single Crystalline Sr3Ru2O7
Authors:
Biao Hu,
Gregory T. McCandless,
Melissa Menard,
V. B. Nascimento,
Julia Y. Chan,
E. W. Plummer,
R. **
Abstract:
We report temperature and thermal-cycling dependence of surface and bulk structures of double-layered perovskite Sr3Ru2O7 single crystals. The surface and bulk structures were investigated using low-energy electron diffraction (LEED) and single-crystal X-ray diffraction (XRD) techniques, respectively. Single-crystal XRD data is in good agreement with previous reports for the bulk structure with Ru…
▽ More
We report temperature and thermal-cycling dependence of surface and bulk structures of double-layered perovskite Sr3Ru2O7 single crystals. The surface and bulk structures were investigated using low-energy electron diffraction (LEED) and single-crystal X-ray diffraction (XRD) techniques, respectively. Single-crystal XRD data is in good agreement with previous reports for the bulk structure with RuO6 octahedral rotation, which increases with decreasing temperature (~ 6.7(6)degrees at 300 K and ~ 8.1(2) degrees at 90 K). LEED results reveal that the octahedra at the surface are much more distorted with a higher rotation angle (~ 12 degrees between 300 and 80 K) and a slight tilt ((4.5\pm2.5) degrees at 300 K and (2.5\pm1.7) degrees at 80 K). While XRD data confirms temperature dependence of the unit cell height/width ratio (i.e. lattice parameter c divided by the average of parameters a and b) found in a prior neutron powder diffraction investigation, both bulk and surface structures display little change with thermal cycles between 300 and 80 K.
△ Less
Submitted 26 March, 2010;
originally announced March 2010.