-
Direct evidence for carbon incorporation on the nitrogen site in AlN
Authors:
Darshana Wickramaratne,
Mackenzie Siford,
Md Shafiqul Islam Mollik,
John L. Lyons,
M. E. Zvanut
Abstract:
We use photo-electron paramagnetic resonance (EPR) measurements and first-principles calculations to identify and explain the properties of carbon in AlN. We present clear evidence for carbon substitution on the nitrogen site (C$_{\rm N}$). We also clarify the origin of a widely observed EPR spectra in AlN that, although often attributed to a deep donor defect, we demonstrate is surprisingly due t…
▽ More
We use photo-electron paramagnetic resonance (EPR) measurements and first-principles calculations to identify and explain the properties of carbon in AlN. We present clear evidence for carbon substitution on the nitrogen site (C$_{\rm N}$). We also clarify the origin of a widely observed EPR spectra in AlN that, although often attributed to a deep donor defect, we demonstrate is surprisingly due to C$_{\rm N}$. Finally, we show the presence of C$_{\rm N}$ is consistent with the absorption spectra at 4.7 eV observed in AlN.
△ Less
Submitted 21 May, 2024;
originally announced May 2024.
-
DART: A Compact Platform For Autonomous Driving Research
Authors:
Lorenzo Lyons,
Thijs Niesten,
Laura Ferranti
Abstract:
This paper presents the design of a research platform for autonomous driving applications, the Delft's Autonomous-driving Robotic Testbed (DART). Our goal was to design a small-scale car-like robot equipped with all the hardware needed for on-board navigation and control while kee** it cost-effective and easy to replicate. To develop DART, we built on an existing off-the-shelf model and augmente…
▽ More
This paper presents the design of a research platform for autonomous driving applications, the Delft's Autonomous-driving Robotic Testbed (DART). Our goal was to design a small-scale car-like robot equipped with all the hardware needed for on-board navigation and control while kee** it cost-effective and easy to replicate. To develop DART, we built on an existing off-the-shelf model and augmented its sensor suite to improve its capabilities for control and motion planning tasks. We detail the hardware setup and the system identification challenges to derive the vehicle's models. Furthermore, we present some use cases where we used DART to test different motion planning applications to show the versatility of the platform. Finally, we provide a git repository with all the details to replicate DART, complete with a simulation environment and the data used for system identification.
△ Less
Submitted 12 February, 2024;
originally announced February 2024.
-
Assessing the SCAN functional for deep defects and small polarons in wide-bandgap semiconductors and insulators
Authors:
Darshana Wickramaratne,
John L. Lyons
Abstract:
We find the recently developed strongly constrained and appropriately normed (SCAN) functional, now widely used in calculations of many materials, is not able to reliably describe the properties of deep defects and small polarons in a set of wide-bandgap semiconductors and insulators (ZnO, ZnSe, GaN, Ga$_2$O$_3$, and NaF). By comparing first-principles calculations using the SCAN functional agains…
▽ More
We find the recently developed strongly constrained and appropriately normed (SCAN) functional, now widely used in calculations of many materials, is not able to reliably describe the properties of deep defects and small polarons in a set of wide-bandgap semiconductors and insulators (ZnO, ZnSe, GaN, Ga$_2$O$_3$, and NaF). By comparing first-principles calculations using the SCAN functional against established experimental information and first-principles calculations using a hybrid functional, we find that the SCAN functional systematically underestimates the magnitude of the structural distortions at deep defects and tends to delocalize the charge density of these defect states.
△ Less
Submitted 21 May, 2024; v1 submitted 6 November, 2023;
originally announced November 2023.
-
Double-Rashba materials for nanocrystals with bright ground-state excitons
Authors:
Michael W. Swift,
Peter C. Sercel,
Alexander L. Efros,
John L. Lyons,
David J. Norris
Abstract:
While nanoscale semiconductor crystallites provide versatile fluorescent materials for light-emitting devices, such nanocrystals suffer from the "dark exciton"$\unicode{x2014}$an optically inactive electronic state into which the nanocrystal relaxes before emitting. Recently, a theoretical mechanism was discovered that can potentially defeat the dark exciton. The Rashba effect can invert the order…
▽ More
While nanoscale semiconductor crystallites provide versatile fluorescent materials for light-emitting devices, such nanocrystals suffer from the "dark exciton"$\unicode{x2014}$an optically inactive electronic state into which the nanocrystal relaxes before emitting. Recently, a theoretical mechanism was discovered that can potentially defeat the dark exciton. The Rashba effect can invert the order of the lowest-lying levels, creating a bright excitonic ground state. To identify materials that exhibit this behavior, here we perform an extensive high-throughput computational search of two large open-source materials databases. Based on a detailed understanding of the Rashba mechanism, we define proxy criteria and screen over 500,000 solids, generating 173 potential "bright-exciton" materials. We then refine this list with higher-level first-principles calculations to obtain 28 candidates. To confirm the potential of these compounds, we select five and develop detailed effective-mass models to determine the nature of their lowest-energy excitonic state. We find that four of the five solids (BiTeCl, BiTeI, Ga$_2$Te$_3$, and KIO$_3$) can yield bright ground-state excitons. Our approach thus reveals promising materials for future experimental investigation of bright-exciton nanocrystals.
△ Less
Submitted 30 October, 2023;
originally announced October 2023.
-
Rule-Based Lloyd Algorithm for Multi-Robot Motion Planning and Control with Safety and Convergence Guarantees
Authors:
Manuel Boldrer,
Alvaro Serra-Gomez,
Lorenzo Lyons,
Javier Alonso-Mora,
Laura Ferranti
Abstract:
This paper presents a distributed rule-based Lloyd algorithm (RBL) for multi-robot motion planning and control. The main limitations of the basic Loyd-based algorithm (LB) concern deadlock issues and the failure to address dynamic constraints effectively. Our contribution is twofold. First, we show how RBL is able to provide safety and convergence to the goal region without relying on communicatio…
▽ More
This paper presents a distributed rule-based Lloyd algorithm (RBL) for multi-robot motion planning and control. The main limitations of the basic Loyd-based algorithm (LB) concern deadlock issues and the failure to address dynamic constraints effectively. Our contribution is twofold. First, we show how RBL is able to provide safety and convergence to the goal region without relying on communication between robots, nor neighbors control inputs, nor synchronization between the robots. We considered both case of holonomic and non-holonomic robots with control inputs saturation. Second, we show that the Lloyd-based algorithm (without rules) can be successfully used as a safety layer for learning-based approaches, leading to non-negligible benefits. We further prove the soundness, reliability, and scalability of RBL through extensive simulations, an updated comparison with the state of the art, and experimental validations on small-scale car-like robots.
△ Less
Submitted 30 October, 2023;
originally announced October 2023.
-
Computational design of optimal heterostructures for $β$-Ga$_2$O$_3$
Authors:
Sierra Seacat,
John L. Lyons,
Hartwin Peelaers
Abstract:
Ga$_2$O$_3$ is a wide-bandgap material of interest for a wide variety of devices, many of these requiring heterostructures, for instance to achieve carrier confinement. A common method to create such heterostructures is to alloy with In$_2$O$_3$ or Al$_2$O$_3$. However, the lattice constants of these materials are significantly different from those of Ga$_2$O$_3$, leading to large amounts of strai…
▽ More
Ga$_2$O$_3$ is a wide-bandgap material of interest for a wide variety of devices, many of these requiring heterostructures, for instance to achieve carrier confinement. A common method to create such heterostructures is to alloy with In$_2$O$_3$ or Al$_2$O$_3$. However, the lattice constants of these materials are significantly different from those of Ga$_2$O$_3$, leading to large amounts of strain in the resulting heterostructure. If the thickness of the heterostructure is increased, this can lead to cracking. By considering alloys of In$_2$O$_3$ and Al$_2$O$_3$, the lattice constants can be tailored to those of Ga$_2$O$_3$, while still kee** a sizable conduction-band offset. We use density functional theory with hybrid functionals to investigate the structural and electronic properties of In$_2$O$_3$ and Al$_2$O$_3$ alloys in the bixbyite, corundum, and monoclinic structures. We find that the lattice constants increase with In incorporation. Bandgaps decrease nonlinearly with increasing In concentration. We find the (In$_{\rm 0.25}$Al$_{\rm 0.75}$)$_{\rm 2}$O$_{\rm 3}$ monoclinic structure to be of particular interest, as it closely matches the Ga$_2$O$_3$ lattice constants while providing an indirect/direct bandgap of 5.94/5.70 eV and a conduction-band offset of 1 eV compared to Ga$_2$O$_3$.
△ Less
Submitted 25 January, 2024; v1 submitted 16 October, 2023;
originally announced October 2023.
-
The deep-acceptor nature of the chalcogen vacancies in 2D transition-metal dichalcogenides
Authors:
Shoaib Khalid,
Bharat Medasani,
John L. Lyons,
Darshana Wickramaratne,
Anderson Janotti
Abstract:
Chalcogen vacancies in the semiconducting monolayer transition-metal dichalcogenides (TMDs) have frequently been invoked to explain a wide range of phenomena, including both unintentional p-type and n-type conductivity, as well as sub-band gap defect levels measured via tunneling or optical spectroscopy. These conflicting interpretations of the deep versus shallow nature of the chalcogen vacancies…
▽ More
Chalcogen vacancies in the semiconducting monolayer transition-metal dichalcogenides (TMDs) have frequently been invoked to explain a wide range of phenomena, including both unintentional p-type and n-type conductivity, as well as sub-band gap defect levels measured via tunneling or optical spectroscopy. These conflicting interpretations of the deep versus shallow nature of the chalcogen vacancies are due in part to shortcomings in prior first-principles calculations of defects in the semiconducting two-dimensional (2D) TMDs that have been used to explain experimental observations. Here we report results of hybrid density functional calculations for the chalcogen vacancy in a series of monolayer TMDs, correctly referencing the thermodynamic charge transition levels to the fundamental band gap (as opposed to the optical band gap). We find that the chalcogen vacancies are deep acceptors and cannot lead to n-type or p-type conductivity. Both the (0/$-1$) and ($-$1/$-$2) transition levels occur in the gap, leading to paramagnetic charge states S=1/2 and S=1, respectively, in a collinear-spin representation. We discuss trends in terms of the band alignments between the TMDs, which can serve as a guide to future experimental studies of vacancy behavior.
△ Less
Submitted 25 September, 2023;
originally announced September 2023.
-
Comment on "Origin of correlated isolated flat bands in copper-substituted lead phosphate apatite"
Authors:
Michael W. Swift,
John L. Lyons
Abstract:
In this comment on "Origin of correlated isolated flat bands in copper-substituted lead phosphate apatite" (arXiv:2307.16892 [cond-mat.supr-con]), we discuss the flat half-occupied two-band manifold that appears in $\mathrm{Pb}_9\mathrm{Cu}(\mathrm{PO}_4)_6(\mathrm{OH})_2$ when using a semilocal DFT functional. We argue that the flat band is an artifact of the functional's overestimation of the en…
▽ More
In this comment on "Origin of correlated isolated flat bands in copper-substituted lead phosphate apatite" (arXiv:2307.16892 [cond-mat.supr-con]), we discuss the flat half-occupied two-band manifold that appears in $\mathrm{Pb}_9\mathrm{Cu}(\mathrm{PO}_4)_6(\mathrm{OH})_2$ when using a semilocal DFT functional. We argue that the flat band is an artifact of the functional's overestimation of the energy of the oxygen p states in the valence band. When using the HSE hybrid functional, the energy of the oxygen p states is reduced, and the copper-derived manifold splits into one fully occupied and one empty band. While these results do not rule out the possibility of superconductivity in doped LK-99, they do predict that stoichiometric $\mathrm{Pb}_9\mathrm{Cu}(\mathrm{PO}_4)_6(\mathrm{OH})_2$ is an insulator, not a superconductor. Furthermore, we have shown that future first-principles studies of these materials should employ hybrid functionals or other advanced methods to ensure that the oxygen-derived valence-band energies are correctly described.
△ Less
Submitted 15 August, 2023;
originally announced August 2023.
-
Lone-Pair Stereochemistry Induces Ferroelectric Distortion and the Rashba Effect in Inorganic Halide Perovskites
Authors:
Michael W. Swift,
John L. Lyons
Abstract:
The lone-pair s states of germanium, tin, and lead underlie many of the unconventional properties of the inorganic metal halide perovskites. Dynamic stereochemical expression of the lone pairs is well established for perovskites based on all three metals, but previously only the germanium perovskites were thought to express the lone pair crystallographically. In this work, we use advanced first-pr…
▽ More
The lone-pair s states of germanium, tin, and lead underlie many of the unconventional properties of the inorganic metal halide perovskites. Dynamic stereochemical expression of the lone pairs is well established for perovskites based on all three metals, but previously only the germanium perovskites were thought to express the lone pair crystallographically. In this work, we use advanced first-principles calculations with a hybrid functional and spin-orbit coupling to predict stable monoclinic polar phases of $\mathrm{CsSnI}_3$ and $\mathrm{CsSnBr}_3$, which exhibit a ferroelectric distortion driven by stereochemical expression of the tin lone pair. We also predict similar metastable ferroelectric phases of $\mathrm{CsPbI}_3$ and $\mathrm{CsPbBr}_3$. In addition to ferroelectricity, these phases exhibit the Rashba effect. Spin splitting in both the conduction and valence bands suggests that nanostructures based on these phases could host bright ground-state excitons. Finally, we discuss paths toward experimental realization of these phases via electric fields and tensile strain.
△ Less
Submitted 4 August, 2023;
originally announced August 2023.
-
How to Incorporate Systematic Effects into Parameter Determination
Authors:
David van Dyk,
Louis Lyons
Abstract:
We describe two different approaches for incorporating systematics into analyses for parameter determination in the physical sciences. We refer to these as the Pragmatic and the Full methods, with the latter coming in two variants: Full Likelihood and Fully Bayesian. By the use of a simple and readily understood example, we point out the advantage of using the Full Likelihood and Fully Bayesian ap…
▽ More
We describe two different approaches for incorporating systematics into analyses for parameter determination in the physical sciences. We refer to these as the Pragmatic and the Full methods, with the latter coming in two variants: Full Likelihood and Fully Bayesian. By the use of a simple and readily understood example, we point out the advantage of using the Full Likelihood and Fully Bayesian approaches; a more realistic example from Astrophysics is also presented. This could be relevant for data analyses in a wide range of scientific fields, for situations where systematic effects need to be incorporated in the analysis procedure. This note is an extension of part of the talk by van Dyk at the PHYSTAT-Systematics meeting.
△ Less
Submitted 8 June, 2023;
originally announced June 2023.
-
Fingerprints of carbon defects in vibrational spectra of gallium nitride (GaN) consider-ing the isotope effect
Authors:
I. Gamov,
J. L. Lyons,
G. Gärtner,
K. Irmscher,
E. Richter,
M. Weyers,
M. R. Wagner,
M. Bickermann
Abstract:
This work examines the carbon defects associated with recently reported and novel peaks of infrared (IR) absorption and Raman scattering appearing in GaN crystals at carbon ($^{12}C$) do** in the range of concentrations from $3.2*10^{17}$ to $3.5*10^{19} cm^{-3}$. 14 unique vibrational modes of defects are observed in GaN samples grown by hydride vapor phase epitaxy (HVPE) and then compared with…
▽ More
This work examines the carbon defects associated with recently reported and novel peaks of infrared (IR) absorption and Raman scattering appearing in GaN crystals at carbon ($^{12}C$) do** in the range of concentrations from $3.2*10^{17}$ to $3.5*10^{19} cm^{-3}$. 14 unique vibrational modes of defects are observed in GaN samples grown by hydride vapor phase epitaxy (HVPE) and then compared with defect properties predicted from first-principles calculations. The vibrational frequency shift in two $^{13}C$ enriched samples related to the effect of the isotope mass indicates six distinct configurations of the carbon-containing point defects. The effect of the isotope replacement is well reproduced by the density functional theory (DFT) calculations. Specific attention is paid to the most pronounced defects, namely tri-carbon complexes($C_N=C=C_N$) and carbon substituting for nitrogen $C_N$. The position of the transition level (+/0) in the bandgap found for $C_N=C=C_N$ defects by DFT at 1.1 eV above the valence band maximum, suggest that $(C_N=C=C_N)^+$ provides compensation of ${C_N}^-$. $C_N=C=C_N$ defects are observed to be prominent, yet have high formation energies in DFT calculations. Regarding ${C_N}$ defects, it is shown that the host Ga and N atoms are involved in the defect's delocalized vibrations and significantly affect the isotopic frequency shift. Much more faint vibrational modes are found from di-atomic carbon-carbon and carbon-hydrogen (C-H) complexes. Also, we note changes of vibrational mode intensities of $C_N$, $C_N=C=C_N$, C-H, and $C_N-C_i$ defects in the IR absorption spectra upon irradiation in the defect-related UV/visible absorption range. Finally, it is demonstrated that the resonant enhancement of the Raman process in the range of defect absorption above 2.5 eV enables the detection of defects at carbon do** concentrations as low as $3.2*10^{17} cm^{-3}$.
△ Less
Submitted 22 September, 2022;
originally announced September 2022.
-
Role of carbon and hydrogen in limiting $n$-type do** of monoclinic (Al$_x$Ga$_{1-x}$)$_2$O$_3$
Authors:
Sai Mu,
Mengen Wang,
Joel B. Varley,
John L. Lyons,
Darshana Wickramaratne,
Chris G. Van de Walle
Abstract:
We use hybrid density functional calculations to assess n-type do** in monoclinic (Al$_x$Ga$_{1-x}$)$_2$O$_3$ alloys. We focus on Si, the most promising donor dopant, and study the structural properties, formation energies and charge-state transition levels of its various configurations. We also explore the impact of C and H, which are common impurities in metal-organic chemical vapor deposition…
▽ More
We use hybrid density functional calculations to assess n-type do** in monoclinic (Al$_x$Ga$_{1-x}$)$_2$O$_3$ alloys. We focus on Si, the most promising donor dopant, and study the structural properties, formation energies and charge-state transition levels of its various configurations. We also explore the impact of C and H, which are common impurities in metal-organic chemical vapor deposition (MOCVD). In Ga$_2$O$_3$, Si$_{Ga}$ is an effective shallow donor, but in Al$_2O_3$ Si$_{Al}$ acts as a DX center with a (+/-) transition level in the band gap. Interstitial H acts as a shallow donor in Ga$_2$O$_3$, but behaves as a compensating acceptor in n-type Al$_2O_3$. Interpolation indicates that Si is an effective donor in (Al$_x$Ga$_{1-x}$)$_2$O$_3$ up to 70% Al, but it can be compensated by H already at 1% Al. We also assess the diffusivity of H and study complex formation. Si$_{cation}$-H complexes have relatively low binding energies. Substitutional C on a cation site acts as a shallow donor in Ga$_2$O$_3$, but can be stable in a negative charge state in (Al$_x$Ga$_{1-x}$)$_2$O$_3$ when x>5%. Substitutional C on an O site (C$_O$) always acts as an acceptor in n-type (Al$_x$Ga$_{1-x}$)$_2$O$_3$, but will incorporate only under relatively O-poor conditions. C$_O$-H complexes can actually incorporate more easily, explaining observations of C-related compensation in Ga$_2$O$_3$ grown by MOCVD. We also investigate C$_{cation}$-H complexes, finding they have high binding energies and act as compensating acceptors when x>56%; otherwise the H just passivates the unintentional C donors. C-H complex formation explains why MOCVD grown Ga$_2$O$_3$ can exhibit record-low free-carrier concentrations, in spite of the unavoidable incorporation of C. Our study highlights that, while Si is a suitable shallow donor in ALGO alloys, control of unintentional impurities is essential to avoid compensation.
△ Less
Submitted 23 January, 2022; v1 submitted 13 November, 2021;
originally announced November 2021.
-
Dark and Bright Excitons in Halide Perovskite Nanoplatelets
Authors:
Moritz Gramlich,
Michael W. Swift,
Carola Lampe,
Markus Döblinger,
John L. Lyons,
Alexander L. Efros,
Peter C. Sercel,
Alexander S. Urban
Abstract:
Semiconductor nanoplatelets (NPLs), with their large exciton binding energy, narrow photoluminescence (PL), and absence of dielectric screening for photons emitted normal to the NPL surface, could be expected to become the fastest luminophores amongst all colloidal nanostructures. However, super-fast emission is suppressed by a dark (optically passive) exciton ground state, substantially split fro…
▽ More
Semiconductor nanoplatelets (NPLs), with their large exciton binding energy, narrow photoluminescence (PL), and absence of dielectric screening for photons emitted normal to the NPL surface, could be expected to become the fastest luminophores amongst all colloidal nanostructures. However, super-fast emission is suppressed by a dark (optically passive) exciton ground state, substantially split from a higher-lying bright (optically active) state. Here, the exciton fine structure in 2-8 monolayer (ML) thick Cs_{n-1}Pb_nBr_{3n+1} NPLs is revealed by merging temperature-resolved PL spectra and time-resolved PL decay with an effective mass modeling taking quantum confinement and dielectric confinement anisotropy into account. This approach exposes a thickness-dependent bright-dark exciton splitting reaching 32.3meV for the 2ML NPLs. The model also reveals a 5-16 meV splitting of the bright exciton states with transition dipoles polarized parallel and perpendicular to the NPL surfaces, the order of which is reversed for the thinnest NPLs, as confirmed by TR-PL measurements. Accordingly, the individual bright states must be taken into account, while the dark exciton state strongly affects the optical properties of the thinnest NPLs even at room temperature. Significantly, the derived model can be generalized for any isotropically or anisotropically confined nanostructure.
△ Less
Submitted 1 October, 2021;
originally announced October 2021.
-
Statistical techniques to estimate the SARS-CoV-2 infection fatality rate
Authors:
Mikael Mieskolainen,
Robert Bainbridge,
Oliver Buchmueller,
Louis Lyons,
Nicholas Wardle
Abstract:
The determination of the infection fatality rate (IFR) for the novel SARS-CoV-2 coronavirus is a key aim for many of the field studies that are currently being undertaken in response to the pandemic. The IFR together with the basic reproduction number $R_0$, are the main epidemic parameters describing severity and transmissibility of the virus, respectively. The IFR can be also used as a basis for…
▽ More
The determination of the infection fatality rate (IFR) for the novel SARS-CoV-2 coronavirus is a key aim for many of the field studies that are currently being undertaken in response to the pandemic. The IFR together with the basic reproduction number $R_0$, are the main epidemic parameters describing severity and transmissibility of the virus, respectively. The IFR can be also used as a basis for estimating and monitoring the number of infected individuals in a population, which may be subsequently used to inform policy decisions relating to public health interventions and lockdown strategies. The interpretation of IFR measurements requires the calculation of confidence intervals. We present a number of statistical methods that are relevant in this context and develop an inverse problem formulation to determine correction factors to mitigate time-dependent effects that can lead to biased IFR estimates. We also review a number of methods to combine IFR estimates from multiple independent studies, provide example calculations throughout this note and conclude with a summary and "best practice" recommendations. The developed code is available online.
△ Less
Submitted 19 November, 2020;
originally announced December 2020.
-
Reproducibility and Replication of Experimental Particle Physics Results
Authors:
Thomas R. Junk,
Louis Lyons
Abstract:
Recently, much attention has been focused on the replicability of scientific results, causing scientists, statisticians, and journal editors to examine closely their methodologies and publishing criteria. Experimental particle physicists have been aware of the precursors of non-replicable research for many decades and have many safeguards to ensure that the published results are as reliable as pos…
▽ More
Recently, much attention has been focused on the replicability of scientific results, causing scientists, statisticians, and journal editors to examine closely their methodologies and publishing criteria. Experimental particle physicists have been aware of the precursors of non-replicable research for many decades and have many safeguards to ensure that the published results are as reliable as possible. The experiments require large investments of time and effort to design, construct, and operate. Large collaborations produce and check the results, and many papers are signed by more than three thousand authors. This paper gives an introduction to what experimental particle physics is and to some of the tools that are used to analyze the data. It describes the procedures used to ensure that results can be computationally reproduced, both by collaborators and by non-collaborators. It describes the status of publicly available data sets and analysis tools that aid in reproduction and recasting of experimental results. It also describes methods particle physicists use to maximize the reliability of the results, which increases the probability that they can be replicated by other collaborations or even the same collaborations with more data and new personnel. Examples of results that were later found to be false are given, both with failed replication attempts and one with alarmingly successful replications. While some of the characteristics of particle physics experiments are unique, many of the procedures and techniques can be and are used in other fields.
△ Less
Submitted 5 May, 2021; v1 submitted 15 September, 2020;
originally announced September 2020.
-
Radiative capture rates at deep defects from electronic structure calculations
Authors:
Cyrus E. Dreyer,
Audrius Alkauskas,
John L. Lyons,
Chris G. Van de Walle
Abstract:
We present a methodology to calculate radiative carrier capture coefficients at deep defects in semiconductors and insulators from first principles. Electronic structure and lattice relaxations are accurately described with hybrid density functional theory. Calculations of capture coefficients provide an additional validation of the accuracy of these functionals in dealing with localized defect st…
▽ More
We present a methodology to calculate radiative carrier capture coefficients at deep defects in semiconductors and insulators from first principles. Electronic structure and lattice relaxations are accurately described with hybrid density functional theory. Calculations of capture coefficients provide an additional validation of the accuracy of these functionals in dealing with localized defect states. We also discuss the validity of the Condon approximation, showing that even in the event of large lattice relaxations the approximation is accurate. We test the method on GaAs:$V_\text{Ga}$-$\text{Te}_\text{As}$ and GaN:C$_\text{N}$, for which reliable experiments are available, and demonstrate very good agreement with measured capture coefficients.
△ Less
Submitted 6 August, 2020;
originally announced August 2020.
-
Interpretable Models for Understanding Immersive Simulations
Authors:
Nicholas Hoernle,
Kobi Gal,
Barbara Grosz,
Leilah Lyons,
Ada Ren,
Andee Rubin
Abstract:
This paper describes methods for comparative evaluation of the interpretability of models of high dimensional time series data inferred by unsupervised machine learning algorithms. The time series data used in this investigation were logs from an immersive simulation like those commonly used in education and healthcare training. The structures learnt by the models provide representations of partic…
▽ More
This paper describes methods for comparative evaluation of the interpretability of models of high dimensional time series data inferred by unsupervised machine learning algorithms. The time series data used in this investigation were logs from an immersive simulation like those commonly used in education and healthcare training. The structures learnt by the models provide representations of participants' activities in the simulation which are intended to be meaningful to people's interpretation. To choose the model that induces the best representation, we designed two interpretability tests, each of which evaluates the extent to which a model's output aligns with people's expectations or intuitions of what has occurred in the simulation. We compared the performance of the models on these interpretability tests to their performance on statistical information criteria. We show that the models that optimize interpretability quality differ from those that optimize (statistical) information theoretic criteria. Furthermore, we found that a model using a fully Bayesian approach performed well on both the statistical and human-interpretability measures. The Bayesian approach is a good candidate for fully automated model selection, i.e., when direct empirical investigations of interpretability are costly or infeasible.
△ Less
Submitted 4 May, 2020; v1 submitted 24 September, 2019;
originally announced September 2019.
-
PHYSTAT$ν$ at CERN (January 2019)
Authors:
Louis Lyons
Abstract:
A short overview is provided of the recent PHYSTAT$ν$ meeting at CERN, which dealt with statistical issues relevant for neutrino experiments.
A short overview is provided of the recent PHYSTAT$ν$ meeting at CERN, which dealt with statistical issues relevant for neutrino experiments.
△ Less
Submitted 24 May, 2019;
originally announced May 2019.
-
Defect identification based on first-principles calculations for deep level transient spectroscopy
Authors:
Darshana Wickramaratne,
Cyrus E. Dreyer,
Bartomeu Monserrat,
Jimmy-Xuan Shen,
John L. Lyons,
Audrius Alkauskas,
Chris G. Van de Walle
Abstract:
Deep level transient spectroscopy (DLTS) is used extensively to study defects in semiconductors. We demonstrate that great care should be exercised in interpreting activation energies extracted from DLTS as ionization energies. We show how first-principles calculations of thermodynamic transition levels, temperature effects of ionization energies, and nonradiative capture coefficients can be used…
▽ More
Deep level transient spectroscopy (DLTS) is used extensively to study defects in semiconductors. We demonstrate that great care should be exercised in interpreting activation energies extracted from DLTS as ionization energies. We show how first-principles calculations of thermodynamic transition levels, temperature effects of ionization energies, and nonradiative capture coefficients can be used to accurately determine actual activation energies that can be directly compared with DLTS. Our analysis is illustrated with hybrid functional calculations for two important defects in GaN that have similar thermodynamic transition levels, and shows that the activation energy extracted from DLTS includes a capture barrier that is temperature dependent, unique to each defect, and in some cases large in comparison to the ionization energy. By calculating quantities that can be directly compared with experiment, first-principles calculations thus offer powerful leverage in identifying the microscopic origin of defects detected in DLTS.
△ Less
Submitted 11 October, 2018;
originally announced October 2018.
-
Dayside magnetospheric and ionospheric responses to a foreshock transient on June 25, 2008: 2. 2-D evolution based on dayside auroral imaging
Authors:
Boyi Wang,
Yukitoshi Nishimura,
Heli Hietala,
Xiao-Chen Shen,
Quanqi Shi,
Hui Zhang,
Larry Lyons,
Ying Zou,
Vassilis Angelopoulos,
Yusuke Ebihara,
Allan Weatherwax
Abstract:
The foreshock region involves localized and transient structures such as foreshock cavities and hot flow anomalies due to solar wind-bow shock interactions, and foreshock transients have been shown to lead to magnetospheric and ionospheric responses. In this paper, the interaction between a foreshock transient and the magnetosphere-ionosphere system is investigated using dayside aurora imagers rev…
▽ More
The foreshock region involves localized and transient structures such as foreshock cavities and hot flow anomalies due to solar wind-bow shock interactions, and foreshock transients have been shown to lead to magnetospheric and ionospheric responses. In this paper, the interaction between a foreshock transient and the magnetosphere-ionosphere system is investigated using dayside aurora imagers revealing structures and propagation in greater detail than previously possible. A foreshock transient was detected by THEMIS-B and C during 1535-1545 UT on June 25, 2008. THEMIS-A, D and E observed magnetopause compression, cold plasma enhancement and ULF waves in the dayside magnetosphere. The all-sky imager (ASI) at South Pole observed that both diffuse and discrete aurora brightened locally soon after the appearance of this foreshock transient. The diffuse aurora brightening, which corresponded to a region a few Re size in GSM-Y in the equatorial plane, propagated duskward with an average speed of ~100 km/s. Soon after the diffuse aurora brightened, discrete aurora also brightened and extended duskward, which was consistent with the motion of the foreshock transient as it swept through the magnetosheath while impacting the magnetopause. Equivalent horizontal currents measured by magnetometers revealed a pair of field-aligned currents (FACs) moving duskward consistent with motion of the discrete aurora patterns. We conclude that the high-resolution and two-dimensional observation of auroral responses by ground-based ASI can help to estimate the evolution and propagation of upstream foreshock transients and their substantial impacts on the magnetosphere-ionosphere coupling system, including magnetospheric compression and currents in the ionosphere.
△ Less
Submitted 27 March, 2018;
originally announced March 2018.
-
A Paradox about Likelihood Ratios?
Authors:
Louis Lyons
Abstract:
We consider whether the asymptotic distributions for the log-likelihood ratio test statistic are expected to be Gaussian or chi-squared. Two straightforward examples provide insight on the difference.
We consider whether the asymptotic distributions for the log-likelihood ratio test statistic are expected to be Gaussian or chi-squared. Two straightforward examples provide insight on the difference.
△ Less
Submitted 12 December, 2017; v1 submitted 2 November, 2017;
originally announced November 2017.
-
Practical Statistics
Authors:
L. Lyons
Abstract:
Accelerators and detectors are expensive, both in terms of money and human effort. It is thus important to invest effort in performing a good statistical analysis of the data, in order to extract the best information from it. This series of five lectures deals with practical aspects of statistical issues that arise in typical High Energy Physics analyses.
Accelerators and detectors are expensive, both in terms of money and human effort. It is thus important to invest effort in performing a good statistical analysis of the data, in order to extract the best information from it. This series of five lectures deals with practical aspects of statistical issues that arise in typical High Energy Physics analyses.
△ Less
Submitted 3 August, 2017;
originally announced August 2017.
-
Bright triplet excitons in lead halide perovskites
Authors:
Michael A. Becker,
Roman Vaxenburg,
Georgian Nedelcu,
Peter C. Sercel,
Andrew Shabaev,
Michael J. Mehl,
John G. Michopoulos,
Samuel G. Lambrakos,
Noam Bernstein,
John L. Lyons,
Thilo Stöferle,
Rainer F. Mahrt,
Maksym V. Kovalenko,
David J. Norris,
Gabriele Rainò,
Alexander L. Efros
Abstract:
Nanostructured semiconductors emit light from electronic states known as excitons[1]. According to Hund's rules[2], the lowest energy exciton in organic materials should be a poorly emitting triplet state. Analogously, the lowest exciton level in all known inorganic semiconductors is believed to be optically inactive. These 'dark' excitons (into which the system can relax) hinder light-emitting de…
▽ More
Nanostructured semiconductors emit light from electronic states known as excitons[1]. According to Hund's rules[2], the lowest energy exciton in organic materials should be a poorly emitting triplet state. Analogously, the lowest exciton level in all known inorganic semiconductors is believed to be optically inactive. These 'dark' excitons (into which the system can relax) hinder light-emitting devices based on semiconductor nanostructures. While strategies to diminish their influence have been developed[3-5], no materials have been identified in which the lowest exciton is bright. Here we show that the lowest exciton in quasi-cubic lead halide perovskites is optically active. We first use the effective-mass model and group theory to explore this possibility, which can occur when the strong spin-orbit coupling in the perovskite conduction band is combined with the Rashba effect [6-10]. We then apply our model to CsPbX3 (X=Cl,Br,I) nanocrystals[11], for which we measure size- and composition-dependent fluorescence at the single-nanocrystal level. The bright character of the lowest exciton immediately explains the anomalous photon-emission rates of these materials, which emit 20 and 1,000 times faster[12] than any other semiconductor nanocrystal at room[13-16] and cryogenic[17] temperatures, respectively. The bright exciton is further confirmed by detailed analysis of the fine structure in low-temperature fluorescence spectra. For semiconductor nanocrystals[18], which are already used in lighting[19,20], lasers[21,22], and displays[23], these optically active excitons can lead to materials with brighter emission and enhanced absorption. More generally, our results provide criteria for identifying other semiconductors exhibiting bright excitons with potentially broad implications for optoelectronic devices.
△ Less
Submitted 10 July, 2017;
originally announced July 2017.
-
Summary of the recent PHYSTAT-$ν$ Workshops
Authors:
Louis Lyons
Abstract:
This is a summary of the recent PHYSTAT-$ν$ Workshops in Japan and at Fermilab, on `Statistical Issues in Experimental Neutrino Physics'.
This is a summary of the recent PHYSTAT-$ν$ Workshops in Japan and at Fermilab, on `Statistical Issues in Experimental Neutrino Physics'.
△ Less
Submitted 4 May, 2017;
originally announced May 2017.
-
Combining parameter values or $p$-values
Authors:
Louis Lyons,
Emilien Chapon
Abstract:
We review the methods to combine several measurements, in the form of parameter values or $p$-values.
We review the methods to combine several measurements, in the form of parameter values or $p$-values.
△ Less
Submitted 18 April, 2017;
originally announced April 2017.
-
Statistical Issues in Neutrino Physics Analyses
Authors:
Louis Lyons
Abstract:
Various statistical issues relevant to searches for new physics or to parameter determination in analyses of data in neutrino experiments are briefly discussed.
Various statistical issues relevant to searches for new physics or to parameter determination in analyses of data in neutrino experiments are briefly discussed.
△ Less
Submitted 12 July, 2016;
originally announced July 2016.
-
Role of excited states in Shockley-Read-Hall recombination in wide-band-gap semiconductors
Authors:
Audrius Alkauskas,
Cyrus E. Dreyer,
John L. Lyons,
Chris G. Van de Walle
Abstract:
Defect-assisted recombination is an important limitation on efficiency of optoelectronic devices. However, since nonradiative capture rates decrease exponentially with energy of the transition, the mechanisms by which such recombination can take place in wide-band-gap materials are unclear. Using electronic structure calculations we uncover the crucial role of electronic excited states in nonradia…
▽ More
Defect-assisted recombination is an important limitation on efficiency of optoelectronic devices. However, since nonradiative capture rates decrease exponentially with energy of the transition, the mechanisms by which such recombination can take place in wide-band-gap materials are unclear. Using electronic structure calculations we uncover the crucial role of electronic excited states in nonradiative recombination processes. The impact is elucidated with examples for the group-III nitrides, for which accumulating experimental evidence indicates that defect-assisted recombination limits efficiency. Our work provides new insights into the physics of nonradiative recombination, and the mechanisms are suggested to be ubiquitous in wide-band-gap semiconductors.
△ Less
Submitted 18 May, 2016;
originally announced May 2016.
-
Observation of the rare $B^0_s\toμ^+μ^-$ decay from the combined analysis of CMS and LHCb data
Authors:
The CMS,
LHCb Collaborations,
:,
V. Khachatryan,
A. M. Sirunyan,
A. Tumasyan,
W. Adam,
T. Bergauer,
M. Dragicevic,
J. Erö,
M. Friedl,
R. Frühwirth,
V. M. Ghete,
C. Hartl,
N. Hörmann,
J. Hrubec,
M. Jeitler,
W. Kiesenhofer,
V. Knünz,
M. Krammer,
I. Krätschmer,
D. Liko,
I. Mikulec,
D. Rabady,
B. Rahbaran
, et al. (2807 additional authors not shown)
Abstract:
A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six sta…
▽ More
A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six standard deviations, and the best measurement of its branching fraction so far. Furthermore, evidence for the $B^0\toμ^+μ^-$ decay is obtained with a statistical significance of three standard deviations. The branching fraction measurements are statistically compatible with SM predictions and impose stringent constraints on several theories beyond the SM.
△ Less
Submitted 17 August, 2015; v1 submitted 17 November, 2014;
originally announced November 2014.
-
Statistical Issues in Searches for New Physics
Authors:
Louis Lyons
Abstract:
Given the cost, both financial and even more importantly in terms of human effort, in building High Energy Physics accelerators and detectors and running them, it is important to use good statistical techniques in analysing data. Some of the statistical issues that arise in searches for New Physics are discussed briefly. They include topics such as:
Should we insist on the 5 sigma criterion for…
▽ More
Given the cost, both financial and even more importantly in terms of human effort, in building High Energy Physics accelerators and detectors and running them, it is important to use good statistical techniques in analysing data. Some of the statistical issues that arise in searches for New Physics are discussed briefly. They include topics such as:
Should we insist on the 5 sigma criterion for discovery claims?
The probability of A, given B, is not the same as the probability of B, given A.
The meaning of p-values.
What is Wilks Theorem and when does it not apply?
How should we deal with the `Look Elsewhere Effect'?
Dealing with systematics such as background parametrisation.
Coverage: What is it and does my method have the correct coverage?
The use of p0 versus p1 plots.
△ Less
Submitted 5 September, 2014;
originally announced September 2014.
-
Testing Hypotheses in Particle Physics: Plots of $p_{0}$ Versus $p_{1}$
Authors:
Luc Demortier,
Louis Lyons
Abstract:
For situations where we are trying to decide which of two hypotheses $H_{0}$ and $H_{1}$ provides a better description of some data, we discuss the usefulness of plots of $p_{0}$ versus $p_{1}$, where $p_{i}$ is the $p$-value for testing $H_{i}$. They provide an interesting way of understanding the difference between the standard way of excluding $H_{1}$ and the $CL_{s}$ approach; the Punzi defini…
▽ More
For situations where we are trying to decide which of two hypotheses $H_{0}$ and $H_{1}$ provides a better description of some data, we discuss the usefulness of plots of $p_{0}$ versus $p_{1}$, where $p_{i}$ is the $p$-value for testing $H_{i}$. They provide an interesting way of understanding the difference between the standard way of excluding $H_{1}$ and the $CL_{s}$ approach; the Punzi definition of sensitivity; the relationship between $p$-values and likelihood ratios; and the probability of observing misleading evidence. They also help illustrate the Law of the Iterated Logarithm and the Jeffreys-Lindley paradox.
△ Less
Submitted 26 August, 2014;
originally announced August 2014.
-
Raster scan or 2-D approach?
Authors:
Louis Lyons
Abstract:
We consider the relative merits of two different approaches to discovery or exclusion of new phenomena, a raster scan or a 2-dimensional approach.
We consider the relative merits of two different approaches to discovery or exclusion of new phenomena, a raster scan or a 2-dimensional approach.
△ Less
Submitted 29 April, 2014;
originally announced April 2014.
-
Discovering the Significance of 5 sigma
Authors:
Louis Lyons
Abstract:
We discuss the traditional criterion for discovery in Particle Physics of requiring a significance corresponding to at least 5 sigma; and whether a more nuanced approach might be better.
We discuss the traditional criterion for discovery in Particle Physics of requiring a significance corresponding to at least 5 sigma; and whether a more nuanced approach might be better.
△ Less
Submitted 4 October, 2013;
originally announced October 2013.
-
First-Principles Calculations of Luminescence Spectrum Line Shapes for Defects in Semiconductors: The Example of GaN and ZnO
Authors:
Audrius Alkauskas,
John L. Lyons,
Daniel Steiauf,
Chris G. Van de Walle
Abstract:
We present a theoretical study of broadening of defect luminescence bands due to vibronic coupling. Numerical proof is provided for the commonly used assumption that a multi-dimensional vibrational problem can be mapped onto an effective one-dimensional configuration coordinate diagram. Our approach is implemented based on density functional theory with a hybrid functional, resulting in luminescen…
▽ More
We present a theoretical study of broadening of defect luminescence bands due to vibronic coupling. Numerical proof is provided for the commonly used assumption that a multi-dimensional vibrational problem can be mapped onto an effective one-dimensional configuration coordinate diagram. Our approach is implemented based on density functional theory with a hybrid functional, resulting in luminescence lineshapes for important defects in GaN and ZnO that show unprecedented agreement with experiment. We find clear trends concerning effective parameters that characterize luminescence bands of donor- and acceptor-type defects, thus facilitating their identification.
△ Less
Submitted 12 March, 2013;
originally announced March 2013.
-
Bayes and Frequentism: a Particle Physicist's perspective
Authors:
Louis Lyons
Abstract:
In almost every scientific field, an experiment involves collecting data and then analysing it. The analysis stage will often consist in trying to extract some physical parameter and estimating its uncertainty; this is known as Parameter Determination. An example would be the determination of the mass of the top quark, from data collected from high energy proton-proton collisions. A different aim…
▽ More
In almost every scientific field, an experiment involves collecting data and then analysing it. The analysis stage will often consist in trying to extract some physical parameter and estimating its uncertainty; this is known as Parameter Determination. An example would be the determination of the mass of the top quark, from data collected from high energy proton-proton collisions. A different aim is to choose between two possible hypotheses. For example, are data on the recession speed s of distant galaxies proportional to their distance d, or do they fit better to a model where the expansion of the Universe is accelerating?
There are two fundamental approaches to such statistical analyses - Bayesian and Frequentist. This article discusses the way they differ in their approach to probability, and then goes on to consider how this affects the way they deal with Parameter Determination and Hypothesis Testing. The examples are taken from every-day life and from Particle Physics.
△ Less
Submitted 7 January, 2013;
originally announced January 2013.
-
Open statistical issues in particle physics
Authors:
Louis Lyons
Abstract:
Many statistical issues arise in the analysis of Particle Physics experiments. We give a brief introduction to Particle Physics, before describing the techniques used by Particle Physicists for dealing with statistical problems, and also some of the open statistical questions.
Many statistical issues arise in the analysis of Particle Physics experiments. We give a brief introduction to Particle Physics, before describing the techniques used by Particle Physicists for dealing with statistical problems, and also some of the open statistical questions.
△ Less
Submitted 11 November, 2008;
originally announced November 2008.
-
Search for First-Generation Scalar Leptoquarks in $\bm{p \bar{p}}$ collisions at $\sqrt{s}$=1.96 TeV
Authors:
The CDF Collaboration,
D. Acosta,
J. Adelman,
T. Affolder,
T. Akimoto,
M. G. Albrow,
D. Ambrose,
S. Amerio,
D. Amidei,
A. Anastassov,
K. Anikeev,
A. Annovi,
J. Antos,
M. Aoki,
G. Apollinari,
T. Arisawa,
J-F. Arguin,
A. Artikov,
W. Ashmanskas,
A. Attal,
F. Azfar,
P. Azzi-Bacchetta,
N. Bacchetta,
H. Bachacou,
W. Badgett
, et al. (605 additional authors not shown)
Abstract:
We report on a search for pair production of first-generation scalar leptoquarks ($LQ$) in $p \bar{p}$ collisions at $\sqrt{s}$=1.96 TeV using an integrated luminosity of 203 $pb^{-1}$ collected at the Fermilab Tevatron collider by the CDF experiment. We observe no evidence for $LQ$ production in the topologies arising from $LQ \bar{LQ} \to eqeq$ and $LQ \bar{LQ} \to eq νq$, and derive 95% C.L.…
▽ More
We report on a search for pair production of first-generation scalar leptoquarks ($LQ$) in $p \bar{p}$ collisions at $\sqrt{s}$=1.96 TeV using an integrated luminosity of 203 $pb^{-1}$ collected at the Fermilab Tevatron collider by the CDF experiment. We observe no evidence for $LQ$ production in the topologies arising from $LQ \bar{LQ} \to eqeq$ and $LQ \bar{LQ} \to eq νq$, and derive 95% C.L. upper limits on the $LQ$ production cross section. %as a function of $β$, where $β$ is the branching fraction for $LQ \to eq$. The results are combined with those obtained from a separately reported CDF search in the topology arising from $LQ\bar{LQ} \to νq νq$ and 95% C.L. lower limits on the LQ mass as a function of $β= BR(LQ \to eq) $ are derived. The limits are 236, 205 and 145 GeV/c$^2$ for $β$ = 1, $β$ = 0.5 and $β$ = 0.1, respectively.
△ Less
Submitted 29 June, 2005;
originally announced June 2005.
-
Comparison of Three-jet Events in Proton-Antiproton Collisions at Center-of-mass Energy 1.8 TeV to Predictions from a Next-to-leading Order QCD Calculation
Authors:
D. Acosta,
T. Affolder,
M. G. Albrow,
D. Ambrose,
D. Amidei,
K. Anikeev,
J. Antos,
G. Apollinari,
T. Arisawa,
A. Artikov,
W. Ashmanskas,
F. Azfar,
P. Azzi-Bacchetta,
N. Bacchetta,
H. Bachacou,
W. Badgett,
A. Barbaro-Galtieri,
V. E. Barnes,
B. A. Barnett,
S. Baroiant,
M. Barone,
G. Bauer,
F. Bedeschi,
S. Behari,
S. Belforte
, et al. (388 additional authors not shown)
Abstract:
The properties of three-jet events with total transverse energy greater than 320 GeV and individual jet energy greater than 20 GeV have been analyzed and compared to absolute predictions from a next-to-leading order (NLO) perturbative QCD calculation. These data, of integrated luminosity 86 pb^-1, were recorded by the CDF Experiment for proton-antiproton collisions at sqrt{s}=1.8 TeV. This study…
▽ More
The properties of three-jet events with total transverse energy greater than 320 GeV and individual jet energy greater than 20 GeV have been analyzed and compared to absolute predictions from a next-to-leading order (NLO) perturbative QCD calculation. These data, of integrated luminosity 86 pb^-1, were recorded by the CDF Experiment for proton-antiproton collisions at sqrt{s}=1.8 TeV. This study tests a model of higher order QCD processes that result in gluon emission and can be used to estimate the magnitude of the contribution of processes higher than NLO. The total cross section is measured to be 466 +/- 3(stat.)^{+207}_{-70}(syst.) pb. The differential cross section is furthermore measured for all kinematically accessible regions of the Dalitz plane, including those for which the theoretical prediction is unreliable. While the measured cross section is consistent with the theoretical prediction in magnitude, the two differ somewhat in shape in the Dalitz plane.
△ Less
Submitted 6 October, 2004;
originally announced October 2004.
-
Interval estimation in the presence of nuisance parameters. 1. Bayesian approach
Authors:
Joel Heinrich,
Craig Blocker,
John Conway,
Luc Demortier,
Louis Lyons,
Giovanni Punzi,
Pekka K. Sinervo
Abstract:
We address the common problem of calculating intervals in the presence of systematic uncertainties. We aim to investigate several approaches, but here describe just a Bayesian technique for setting upper limits. The particular example we study is that of inferring the rate of a Poisson process when there are uncertainties on the acceptance and the background. Limit calculating software associate…
▽ More
We address the common problem of calculating intervals in the presence of systematic uncertainties. We aim to investigate several approaches, but here describe just a Bayesian technique for setting upper limits. The particular example we study is that of inferring the rate of a Poisson process when there are uncertainties on the acceptance and the background. Limit calculating software associated with this work is available in the form of C functions.
△ Less
Submitted 27 September, 2004;
originally announced September 2004.
