-
An extreme thermal cycling reliability test of ATLAS ITk Strips barrel modules
Authors:
A. Tishelman-Charny,
A. Affolder,
F. Capocasa,
E. Duden,
V. Fadeyev,
M. Gignac,
C. Helling,
H. Herde,
J. Johnson,
D. Lynn,
M. Morii,
A. Mitra,
L. Poley,
G. Sciolla,
S. Stucci,
P. Sharma,
G. Van Nieuwenhuizen,
E. Wallin,
A. Wang,
S. Wonsak
Abstract:
At the end of Run 3 of the Large Hadron Collider (LHC), the accelerator complex will be upgraded to the High-Luminosity LHC (HL-LHC) in order to increase the total amount of data provided to its experiments. To cope with the increased rates of data, radiation, and pileup, the ATLAS detector will undergo a substantial upgrade, including a replacement of the Inner Detector with a future Inner Tracke…
▽ More
At the end of Run 3 of the Large Hadron Collider (LHC), the accelerator complex will be upgraded to the High-Luminosity LHC (HL-LHC) in order to increase the total amount of data provided to its experiments. To cope with the increased rates of data, radiation, and pileup, the ATLAS detector will undergo a substantial upgrade, including a replacement of the Inner Detector with a future Inner Tracker, called the ITk. The ITk will be composed of pixel and strip sub-detectors, where the strips portion will be composed of 17,888 silicon strip detector modules. During the HL-LHC running period, the ITk will be cooled and warmed a number of times from about ${-35}^\circ$C to room temperature as part of the operational cycle, including warm-ups during yearly shutdowns. To ensure ITk Strips modules are functional after these expected temperature changes, and to ensure modules are mechanically robust, each module must undergo ten thermal cycles and pass a set of electrical and mechanical criteria before it is placed on a local support structure. This paper describes the thermal cycling Quality Control (QC) procedure, and results from the barrel pre-production phase (about 5% of the production volume). Additionally, in order to assess the headroom of the nominal QC procedure of 10 cycles and to ensure modules don't begin failing soon after, four representative ITk Strips barrel modules were thermally cycled 100 times - this study is also described.
△ Less
Submitted 8 July, 2024;
originally announced July 2024.
-
The ABC130 barrel module prototy** programme for the ATLAS strip tracker
Authors:
Luise Poley,
Craig Sawyer,
Sagar Addepalli,
Anthony Affolder,
Bruno Allongue,
Phil Allport,
Eric Anderssen,
Francis Anghinolfi,
Jean-François Arguin,
Jan-Hendrik Arling,
Olivier Arnaez,
Nedaa Alexandra Asbah,
Joe Ashby,
Eleni Myrto Asimakopoulou,
Naim Bora Atlay,
Ludwig Bartsch,
Matthew J. Basso,
James Beacham,
Scott L. Beaupré,
Graham Beck,
Carl Beichert,
Laura Bergsten,
Jose Bernabeu,
Prajita Bhattarai,
Ingo Bloch
, et al. (224 additional authors not shown)
Abstract:
For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000…
▽ More
For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000 modules in the forward region (end-caps), which are foreseen to be constructed over a period of 3.5 years. The construction of each module consists of a series of assembly and quality control steps, which were engineered to be identical for all production sites. In order to develop the tooling and procedures for assembly and testing of these modules, two series of major prototy** programs were conducted: an early program using readout chips designed using a 250 nm fabrication process (ABCN-25) and a subsequent program using a follow-up chip set made using 130 nm processing (ABC130 and HCC130 chips). This second generation of readout chips was used for an extensive prototy** program that produced around 100 barrel-type modules and contributed significantly to the development of the final module layout. This paper gives an overview of the components used in ABC130 barrel modules, their assembly procedure and findings resulting from their tests.
△ Less
Submitted 7 September, 2020;
originally announced September 2020.
-
Evaluation of Radiation Hardness of High-Voltage Silicon Vertical JFETs
Authors:
Gabriele Giacomini,
Marco Bomben,
Wei Chen,
David Lynn
Abstract:
In the future ATLAS Inner Tracker, each silicon strip module will be equipped with a switch able to separate the high voltage supply from the sensor in case the latter becomes faulty. The switch, placed in between the HV supply and the sensor, needs to sustain a high voltage in its OFF state, to offer a low resistance path for the sensor leakage current in the ON state, and be radiation hard up to…
▽ More
In the future ATLAS Inner Tracker, each silicon strip module will be equipped with a switch able to separate the high voltage supply from the sensor in case the latter becomes faulty. The switch, placed in between the HV supply and the sensor, needs to sustain a high voltage in its OFF state, to offer a low resistance path for the sensor leakage current in the ON state, and be radiation hard up to 1.2e15 neq/cm2 along with other requirements. While GaN JFETs have been selected as suitable rad-hard switch, a silicon vertical HV-JFET was developed by Brookhaven National Laboratory as an alternative option. Pre-irradiation results showed the functionality of the device and proved that the silicon HV-JFET satisfied the pre-irradiation requirements for the switch. To assess its suitability after irradiation, a few p-type HV-JFETs have been neutron irradiated at Jozef Stefan Institute (JSI, Ljubljana, Slovenia). This paper reports the static characterization of these irradiated devices and the TCAD numerical simulations used to get an insight of the physics governing the post-irradiation behaviour.
△ Less
Submitted 21 July, 2020;
originally announced July 2020.
-
GAVIP: A Platform for Gaia Data Analysis
Authors:
Daniel Vagg,
Derek O'Callaghan,
Fionn Ó hÓgáin,
Sheila McBreen,
Lorraine Hanlon,
David Lynn,
William O'Mullane
Abstract:
Gaia is a major European Space Agency (ESA) astrophysics mission designed to map and analyse 10$^9$ stars, ultimately generating more than 1 PetaByte of data products. As Gaia data becomes publicly available and reaches a wider audience, there is an increasing need to facilitate the further use of Gaia products without needing to download large datasets. The Gaia Added Value Interface Platform (GA…
▽ More
Gaia is a major European Space Agency (ESA) astrophysics mission designed to map and analyse 10$^9$ stars, ultimately generating more than 1 PetaByte of data products. As Gaia data becomes publicly available and reaches a wider audience, there is an increasing need to facilitate the further use of Gaia products without needing to download large datasets. The Gaia Added Value Interface Platform (GAVIP) is designed to address this challenge by providing an innovative platform within which scientists can submit and deploy code, packaged as "Added Value Interfaces" (AVIs), which will be executed close to the data. Deployed AVIs and associated outputs may also be made available to other GAVIP platform users, thus providing a mechanism for scientific experiment reproducibility. This paper describes the capabilities and features of GAVIP.
△ Less
Submitted 30 May, 2016;
originally announced May 2016.
-
Rad-hard vertical JFET switch for the HV-MUX system of the ATLAS upgrade Inner Tracker
Authors:
Pablo Fernandez-Martinez,
Miguel Ullan,
David Flores,
Salvador Hidalgo,
David Quirion,
David Lynn
Abstract:
This work presents a new silicon vertical JFET (V-JFET) device, based on the trenched 3D-detector technology developed at IMB-CNM, to be used as switches for the High-Voltage powering scheme of the ATLAS upgrade Inner Tracker. The optimization of the device characteristics is performed by 2D and 3D TCAD simulations. Special attention has been paid to the on-resistance and the switch-off and breakd…
▽ More
This work presents a new silicon vertical JFET (V-JFET) device, based on the trenched 3D-detector technology developed at IMB-CNM, to be used as switches for the High-Voltage powering scheme of the ATLAS upgrade Inner Tracker. The optimization of the device characteristics is performed by 2D and 3D TCAD simulations. Special attention has been paid to the on-resistance and the switch-off and breakdown voltages to meet the specific requirements of the system. In addition, a set of parameter values has been extracted from the simulated curves to implement a SPICE model of the proposed V-JFET transistor. As these devices are expected to operate under very high radiation conditions during the whole experiment life-time, a study of the radiation damage effects and the expected degradation on the device performance is also presented at the end of the paper.
△ Less
Submitted 2 November, 2015;
originally announced November 2015.
-
Planning the Future of U.S. Particle Physics (Snowmass 2013): Chapter 8: Instrumentation Frontier
Authors:
M. Demarteau,
R. Lipton,
H. Nicholson,
I. Shipsey,
D. Akerib,
A. Albayrak-Yetkin,
J. Alexander,
J. Anderson,
M. Artuso,
D. Asner,
R. Ball,
M. Battaglia,
C. Bebek,
J. Beene,
Y. Benhammou,
E. Bentefour,
M. Bergevin,
A. Bernstein,
B. Bilki,
E. Blucher,
G. Bolla,
D. Bortoletto,
N. Bowden,
G. Brooijmans,
K. Byrum
, et al. (189 additional authors not shown)
Abstract:
These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 8, on the Instrumentation Frontier, discusses the instrumentation needs of future experiments in the Energy, Intensity, and Cosmic Frontiers, promising new technologies for particle physics research, and iss…
▽ More
These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 8, on the Instrumentation Frontier, discusses the instrumentation needs of future experiments in the Energy, Intensity, and Cosmic Frontiers, promising new technologies for particle physics research, and issues of gathering resources for long-term research in this area.
△ Less
Submitted 23 January, 2014;
originally announced January 2014.
-
Shape Selection and Multi-stability in Helical Ribbons
Authors:
Qiaohang Guo,
Anil K. Mehta,
Martha A. Grover,
Wenzhe Chen,
David G. Lynn,
Zi Chen
Abstract:
Helical structures, almost ubiquitous in biological systems, have inspired the design and manufacturing of helical devices with applications in nanoelecromechanical systems (NEMS), morphing structures, optoelectronics, micro-robotics and drug delivery devices. Meanwhile, multi-stable structures, represented by the Venus flytrap and slap bracelet, have attracted increasing attention due to their ap…
▽ More
Helical structures, almost ubiquitous in biological systems, have inspired the design and manufacturing of helical devices with applications in nanoelecromechanical systems (NEMS), morphing structures, optoelectronics, micro-robotics and drug delivery devices. Meanwhile, multi-stable structures, represented by the Venus flytrap and slap bracelet, have attracted increasing attention due to their applications in making artificial muscles, bio-inspired robots, deployable aerospace components and energy harvesting devices. Here we show that the mechanical anisotropy pertinent to helical deformation, together with geometric nonlinearity associated with multi-stability, can lead to novel selection principle of the geometric shape and multi-stability in spontaneous helical ribbons. Simple table-top experiments were also performed to illustrate the working principle. Our work will promote understanding of spontaneous curling, twisting, wrinkling of thin objects and their instabilities, and serve as a tool in develo** functional structures and devices with tunable, morphing geometries and smart actuation mechanism that can be applied in a spectrum of areas.
△ Less
Submitted 12 December, 2013;
originally announced December 2013.
-
Sensor Compendium
Authors:
M. Artuso,
M. Battaglia,
G. Bolla,
D. Bortoletto,
B. Cabrera,
J. E. Carlstrom,
C. L. Chang,
W. Cooper,
C. Da Via,
M. Demarteau,
J. Fast,
H. Frisch,
M. Garcia-Sciveres,
S. Golwala,
C. Haber,
J. Hall,
E. Hoppe,
K. D. Irwin,
H. Kagan,
C. Kenney,
A. T. Lee,
D. Lynn,
J. Orrell,
M. Pyle,
R. Rusack
, et al. (7 additional authors not shown)
Abstract:
Sensors play a key role in detecting both charged particles and photons for all three frontiers in Particle Physics. The signals from an individual sensor that can be used include ionization deposited, phonons created, or light emitted from excitations of the material. The individual sensors are then typically arrayed for detection of individual particles or groups of particles. Mounting of new, e…
▽ More
Sensors play a key role in detecting both charged particles and photons for all three frontiers in Particle Physics. The signals from an individual sensor that can be used include ionization deposited, phonons created, or light emitted from excitations of the material. The individual sensors are then typically arrayed for detection of individual particles or groups of particles. Mounting of new, ever higher performance experiments, often depend on advances in sensors in a range of performance characteristics. These performance metrics can include position resolution for passing particles, time resolution on particles impacting the sensor, and overall rate capabilities. In addition the feasible detector area and cost frequently provides a limit to what can be built and therefore is often another area where improvements are important. Finally, radiation tolerance is becoming a requirement in a broad array of devices. We present a status report on a broad category of sensors, including challenges for the future and work in progress to solve those challenges
△ Less
Submitted 25 October, 2013; v1 submitted 18 October, 2013;
originally announced October 2013.
-
Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics
Authors:
The ATLAS Collaboration,
G. Aad,
E. Abat,
B. Abbott,
J. Abdallah,
A. A. Abdelalim,
A. Abdesselam,
O. Abdinov,
B. Abi,
M. Abolins,
H. Abramowicz,
B. S. Acharya,
D. L. Adams,
T. N. Addy,
C. Adorisio,
P. Adragna,
T. Adye,
J. A. Aguilar-Saavedra,
M. Aharrouche,
S. P. Ahlen,
F. Ahles,
A. Ahmad,
H. Ahmed,
G. Aielli,
T. Akdogan
, et al. (2587 additional authors not shown)
Abstract:
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on…
▽ More
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on simulations of the detector and physics processes, with particular emphasis given to the data expected from the first years of operation of the LHC at CERN.
△ Less
Submitted 14 August, 2009; v1 submitted 28 December, 2008;
originally announced January 2009.
-
Beam-Energy and System-Size Dependence of Dynamical Net Charge Fluctuations
Authors:
B. I. Abelev,
M. M. Aggarwal,
Z. Ahammed,
B. D. Anderson,
D. Arkhipkin,
G. S. Averichev,
Y. Bai,
J. Balewski,
O. Barannikova,
L. S. Barnby,
J. Baudot,
S. Baumgart,
D. R. Beavis,
R. Bellwied,
F. Benedosso,
R. R. Betts,
S. Bhardwaj,
A. Bhasin,
A. K. Bhati,
H. Bichsel,
J. Bielcik,
J. Bielcikova,
B. Biritz,
L. C. Bland,
M. Bombara
, et al. (338 additional authors not shown)
Abstract:
We present measurements of net charge fluctuations in $Au + Au$ collisions at $\sqrt{s_{NN}} = $ 19.6, 62.4, 130, and 200 GeV, $Cu + Cu$ collisions at $\sqrt{s_{NN}} = $ 62.4, 200 GeV, and $p + p$ collisions at $\sqrt{s} = $ 200 GeV using the dynamical net charge fluctuations measure $ν_{+-{\rm,dyn}}$. We observe that the dynamical fluctuations are non-zero at all energies and exhibit a modest d…
▽ More
We present measurements of net charge fluctuations in $Au + Au$ collisions at $\sqrt{s_{NN}} = $ 19.6, 62.4, 130, and 200 GeV, $Cu + Cu$ collisions at $\sqrt{s_{NN}} = $ 62.4, 200 GeV, and $p + p$ collisions at $\sqrt{s} = $ 200 GeV using the dynamical net charge fluctuations measure $ν_{+-{\rm,dyn}}$. We observe that the dynamical fluctuations are non-zero at all energies and exhibit a modest dependence on beam energy. A weak system size dependence is also observed. We examine the collision centrality dependence of the net charge fluctuations and find that dynamical net charge fluctuations violate $1/N_{ch}$ scaling, but display approximate $1/N_{part}$ scaling. We also study the azimuthal and rapidity dependence of the net charge correlation strength and observe strong dependence on the azimuthal angular range and pseudorapidity widths integrated to measure the correlation.
△ Less
Submitted 21 July, 2008;
originally announced July 2008.
-
Double Spin Asymmetries A_NN and A_SS at sqrt{s}=200 GeV in Polarized Proton-Proton Elastic Scattering at RHIC
Authors:
pp2pp Collaboration,
S. Bultmann,
I. H. Chiang,
R. E. Chrien,
A. Drees,
R. L. Gill,
W. Guryn,
J. Landgraf,
T. A. Ljubicic,
D. Lynn,
C. Pearson,
P. Pile,
A. Rusek,
M. Sakitt,
S. Tepikian,
K. Yip,
J. Chwastowski,
B. Pawlik,
M. Haguenauer,
A. A. Bogdanov,
S. B. Nurushev,
M. F. Runtzo,
M. N. Strikhanov,
I. G. Alekseev,
V. P. Kanavets
, et al. (12 additional authors not shown)
Abstract:
We present the first measurements of the double spin asymmetries A_NN and A_SS at sqrt{s}=200 GeV, obtained by the pp2pp experiment using polarized proton beams at the Relativistic Heavy Ion Collider (RHIC). The data were collected in the four momentum transfer t range 0.01<|t|<0.03 (GeV/c)^2. The measured asymmetries, which are consistent with zero, allow us to estimate upper limits on the doub…
▽ More
We present the first measurements of the double spin asymmetries A_NN and A_SS at sqrt{s}=200 GeV, obtained by the pp2pp experiment using polarized proton beams at the Relativistic Heavy Ion Collider (RHIC). The data were collected in the four momentum transfer t range 0.01<|t|<0.03 (GeV/c)^2. The measured asymmetries, which are consistent with zero, allow us to estimate upper limits on the double helicity-flip amplitudes phi_2 and phi_4 at small t as well as on the difference Delta(sigma_T) between the total cross sections for transversely polarized protons with antiparallel or parallel spin orientations.
△ Less
Submitted 6 March, 2007; v1 submitted 16 October, 2006;
originally announced October 2006.
-
Strange baryon resonance production in $\sqrt{s_{NN}} = 200$ GeV $p+p$ and $Au+Au$ collisions
Authors:
The STAR collaboration,
B. I. Abelev,
M. M. Aggarwal,
Z. Ahammed,
J. Amonett,
B. D. Anderson,
M. Anderson,
D. Arkhipkin,
G. S. Averichev,
Y. Bai,
J. Balewski,
O. Barannikova,
L. S. Barnby,
J. Baudot,
S. Bekele,
V. V. Belaga,
A. Bellingeri-Laurikainen,
R. Bellwied,
F. Benedosso,
S. Bhardwaj,
A. Bhasin,
A. K. Bhati,
H. Bichsel,
J. Bielcik,
J. Bielcikova
, et al. (353 additional authors not shown)
Abstract:
We report the measurements of $Σ(1385)$ and $Λ(1520)$ production in $p+p$ and $Au+Au$ collisions at $\sqrt{s_{NN}} = 200$ GeV from the STAR collaboration. The yields and the $p_{T}$ spectra are presented and discussed in terms of chemical and thermal freeze-out conditions and compared to model predictions. Thermal and microscopic models do not adequately describe the yields of all the resonances…
▽ More
We report the measurements of $Σ(1385)$ and $Λ(1520)$ production in $p+p$ and $Au+Au$ collisions at $\sqrt{s_{NN}} = 200$ GeV from the STAR collaboration. The yields and the $p_{T}$ spectra are presented and discussed in terms of chemical and thermal freeze-out conditions and compared to model predictions. Thermal and microscopic models do not adequately describe the yields of all the resonances produced in central $Au+Au$ collisions. Our results indicate that there may be a time-span between chemical and thermal freeze-out during which elastic hadronic interactions occur.
△ Less
Submitted 11 October, 2006; v1 submitted 27 April, 2006;
originally announced April 2006.
-
Measurements of Single Diffraction at sqrt(s) = 630 GeV; Evidence for a Non-Linear alpha(t) of the Pomeron
Authors:
UA8 Collaboration,
A. Brandt,
J. B. Cheze,
S. Erhan,
A. Kuzucu,
D. Lynn,
M. Medinnis,
N. Ozdes,
P. E. Schlein,
M. T. Zeyrek,
J. Zsembery,
J. G. Zweizig
Abstract:
We report measurements of the inclusive differential cross section for the single-diffractive reactions: p + pbar --> p + X and p + pbar --> X + pbar at sqrt(s) = 630 GeV, in the momentum transfer range, 0.8 < -t < 2.0 GeV^2 and final state Feynman-x > 0.90. Based on the assumption of factorization, several new features of the Pomeron Flux Factor are determined from simultaneous fits to our UA8…
▽ More
We report measurements of the inclusive differential cross section for the single-diffractive reactions: p + pbar --> p + X and p + pbar --> X + pbar at sqrt(s) = 630 GeV, in the momentum transfer range, 0.8 < -t < 2.0 GeV^2 and final state Feynman-x > 0.90. Based on the assumption of factorization, several new features of the Pomeron Flux Factor are determined from simultaneous fits to our UA8 data and lower energy data from the CHLM collaboration at the CERN-Intersecting Storage Rings.
Prominent among these is that the effective Pomeron Regge trajectory requires a term quadratic in t, with coefficient, a'' = 0.079 +- 0.012 GeV^{-4}. We also show that the data require a Pomeron-proton cross section that first decreases with increasing diffractive mass (corresponding to the PPR term in the triple-Regge expansion) and then increases at larger mass (the PPP term), similar to real particle total cross sections. We measure the product, (K x sigma0) = 0.72 +- 0.10 mb/GeV^2, where K is the normalization constant of the Pomeron Flux Factor in the proton and sigma0 is the scale constant in the Pomeron-proton total cross section. Finally, we report the occurence of ``beam jets'' in the Pomeron direction in the rest frame of the diffractive system.
△ Less
Submitted 8 April, 1998; v1 submitted 6 October, 1997;
originally announced October 1997.
-
Pseudorapidity Distribution of Charged Particles in PbarP Collisions at root(s)= 630GeV
Authors:
R. Harr,
C. Liapis,
P. Karchin,
C. Biino,
S. Erhan,
W. Hofmann,
P. Kreuzer,
D. Lynn,
M. Medinnis,
S. Palestini,
L. Pesando,
M. Punturo,
P. Schlein,
B. Wilkens,
J. Zweizig
Abstract:
Using a silicon vertex detector, we measure the charged particle pseudorapidity distribution over the range 1.5 to 5.5 using data collected from PbarP collisions at root s = 630 GeV. With a data sample of 3 million events, we deduce a result with an overall normalization uncertainty of 5%, and typical bin to bin errors of a few percent. We compare our result to the measurement of UA5, and the di…
▽ More
Using a silicon vertex detector, we measure the charged particle pseudorapidity distribution over the range 1.5 to 5.5 using data collected from PbarP collisions at root s = 630 GeV. With a data sample of 3 million events, we deduce a result with an overall normalization uncertainty of 5%, and typical bin to bin errors of a few percent. We compare our result to the measurement of UA5, and the distribution generated by the Lund Monte Carlo with default settings. This is only the second measurement at this level of precision, and only the second measurement for pseudorapidity greater than 3.
△ Less
Submitted 2 March, 1997;
originally announced March 1997.
