Showing 1–35 of 35 results for author: Luo, K H

Discrete Boltzmann model with split collision for nonequilibrium reactive flows

Authors: Chuandong Lin, Kai H. Luo, Huilin Lai

Abstract: A multi-relaxation-time discrete Boltzmann model (DBM) with split collision is proposed for both subsonic and supersonic compressible reacting flows, where chemical reactions take place among various components. The physical model is based on a unified set of discrete Boltzmann equations that describes the evolution of each chemical species with adjustable acceleration, specific heat ratio, and Pr… ▽ More A multi-relaxation-time discrete Boltzmann model (DBM) with split collision is proposed for both subsonic and supersonic compressible reacting flows, where chemical reactions take place among various components. The physical model is based on a unified set of discrete Boltzmann equations that describes the evolution of each chemical species with adjustable acceleration, specific heat ratio, and Prandtl number. On the righ-hand side of discrete Boltzmann equations, the collision, force, and reaction terms denote the change rates of distribution functions due to self- and cross-collisions, external forces, and chemical reactions, respectively. The source terms can be calculated in three ways, among which the matrix inversion method possesses the highest physical accuracy and computational efficiency. Through Chapman-Enskog analysis, it is proved that the DBM is consistent with the reactive Navier-Stokes equations, Fick's law and Stefan-Maxwell diffusion equation in the hydrodynamic limit. Compared with the one-step-relaxation model, the split collision model offers a detailed and precise measurement of hydrodynamic, thermodynamic, and chemical nonequilibrium effects. Finally, the model is validated by six benchmarks, including multicomponent diffusion, mixture in the force field, Kelvin-Helmholtz instability, flame at constant pressure, opposing chemical reaction, and steady detonation. △ Less

Submitted 22 April, 2024; v1 submitted 9 March, 2024; originally announced March 2024.

Orbital-angular-momentum dependent speckles for spatial mode sorting and multiplexed data transmission

Authors: Rui Ma, Ke Hai Luo, Zhao Wang, **g Song He, Wei Li Zhang, Dian Yuan Fan, Anderson S. L. Gomes, Jun Liu

Abstract: Characterizing the orbital angular momentum (OAM) of a vortex beam is critically important for OAM-encoded data transfer. However, in typical OAM-based applications where vortex beams transmit through diffusers, the accompanying scattering effect tends to be either deliberately prevented, or characterized and then modulated actively based on complex wavefront sha** and interferometry techniques.… ▽ More Characterizing the orbital angular momentum (OAM) of a vortex beam is critically important for OAM-encoded data transfer. However, in typical OAM-based applications where vortex beams transmit through diffusers, the accompanying scattering effect tends to be either deliberately prevented, or characterized and then modulated actively based on complex wavefront sha** and interferometry techniques. Here, we aim to investigate the characteristics of blurred speckles obtained after a vortex beam transmits through a ground glass diffuser. It is theoretically and experimentally demonstrated that a cross-correlation annulus can be identified by implementing the cross-correlation operation between speckle patterns corresponding to vortex beams with different OAM values. Besides, it is worth noting that, the size of the cross-correlation annulus is determined by the absolute value of the topological charge difference between the two corresponding vortex beams. Based on this mechanism, the OAM modes can be easily sorted from the incoherently measured OAM-dependent speckles as well as their cross-correlation. Furthermore, to make full use of the orthogonal feature of the OAM-dependent speckles, demultiplexing of OAM-encoded data transfer is verified using a ground glass diffuser. Both 8-bit grayscale and 24-bit RGB OAM-encoded data transfers are carried out in experiments with superior error rates. We can conclude that the OAM-dependent speckles can be not only utilized as a competitive candidate for the OAM mode sorting function in a simple way but also provide an efficient method for the demultiplexing of OAM-encoded data transfer in a practical application. △ Less

Submitted 26 October, 2023; originally announced October 2023.

Modeling realistic multiphase flows using a non-orthogonal multiple-relaxation-time lattice Boltzmann method

Authors: Linlin Fei, **gyu Du, Kai H. Luo, Sauro Succi, Marco Lauricella, Andrea Montessori, Qian Wang

Abstract: In this paper, we develop a three-dimensional multiple-relaxation-time lattice Boltzmann method (MRT-LBM) based on a set of non-orthogonal basis vectors. Compared with the classical MRT-LBM based on a set of orthogonal basis vectors, the present non-orthogonal MRT-LBM simplifies the transformation between the discrete velocity space and the moment space, and exhibits better portability across diff… ▽ More In this paper, we develop a three-dimensional multiple-relaxation-time lattice Boltzmann method (MRT-LBM) based on a set of non-orthogonal basis vectors. Compared with the classical MRT-LBM based on a set of orthogonal basis vectors, the present non-orthogonal MRT-LBM simplifies the transformation between the discrete velocity space and the moment space, and exhibits better portability across different lattices. The proposed method is then extended to multiphase flows at large density ratio with tunable surface tension, and its numerical stability and accuracy are well demonstrated by some benchmark cases. Using the proposed method, a practical case of a fuel droplet impacting on a dry surface at high Reynolds and Weber numbers is simulated and the evolution of the spreading film diameter agrees well with the experimental data. Furthermore, another realistic case of a droplet impacting on a super-hydrophobic wall with a cylindrical obstacle is reproduced, which confirms the experimental finding of Liu \textit{et al.} [``Symmetry breaking in drop bouncing on curved surfaces," Nature communications 6, 10034 (2015)] that the contact time is minimized when the cylinder radius is comparable with the droplet cylinder. △ Less

Submitted 28 June, 2023; originally announced June 2023.

Comments: 19 pages, 11 figures

Journal ref: Physics of Fluids 31, 042105 (2019)

Demonstration of Hong-Ou-Mandel interference in an LNOI directional coupler

Authors: Silia Babel, Laura Bollmers, Marcello Massaro, Kai Hong Luo, Michael Stefszky, Federico Pegoraro, Philip Held, Harald Herrmann, Christof Eigner, Benjamin Brecht, Laura Padberg, Christine Silberhorn

Abstract: Interference between single photons is key for many quantum optics experiments and applications in quantum technologies, such as quantum communication or computation. It is advantageous to operate the systems at telecommunication wavelengths and to integrate the setups for these applications in order to improve stability, compactness and scalability. A new promising material platform for integrate… ▽ More Interference between single photons is key for many quantum optics experiments and applications in quantum technologies, such as quantum communication or computation. It is advantageous to operate the systems at telecommunication wavelengths and to integrate the setups for these applications in order to improve stability, compactness and scalability. A new promising material platform for integrated quantum optics is lithium niobate on insulator (LNOI). Here, we realise Hong-Ou-Mandel (HOM) interference between telecom photons from an engineered parametric down-conversion source in an LNOI directional coupler. The coupler has been designed and fabricated in house and provides close to perfect balanced beam splitting. We obtain a raw HOM visibility of (93.5+/-0.7)%, limited mainly by the source performance and in good agreement with off-chip measurements. This lays the foundation for more sophisticated quantum experiments in LNOI △ Less

Submitted 23 December, 2022; originally announced December 2022.

Comments: 7 pages, 6 figures

Improved three-dimensional thermal multiphase lattice Boltzmann model for liquid-vapor phase change

Authors: Qing Li, Y. Yu, Kai. H. Luo

Abstract: Modeling liquid-vapor phase change using the lattice Boltzmann (LB) method has attracted significant attention in recent years. In this paper, we propose an improved three-dimensional (3D) thermal multiphase LB model for simulating liquid-vapor phase change. The proposed model has the following features. First, it is still within the framework of the thermal LB method using a temperature distribut… ▽ More Modeling liquid-vapor phase change using the lattice Boltzmann (LB) method has attracted significant attention in recent years. In this paper, we propose an improved three-dimensional (3D) thermal multiphase LB model for simulating liquid-vapor phase change. The proposed model has the following features. First, it is still within the framework of the thermal LB method using a temperature distribution function and therefore retains the fundamental advantages of the thermal LB method. Second, in the existing thermal LB models for liquid-vapor phase change, the finite-difference computations of the gradient terms $\nabla \cdot u$ and $\nabla T$ usually require special treatment at boundary nodes, while in the proposed thermal LB model these two terms are calculated locally. Moreover, in some of the existing thermal LB models, the error term ${\partial _{t_0}}\left( {Tu} \right)$ is eliminated by adding local correction terms to the collision process in the moment space, which causes these thermal LB models to be limited to the D2Q9 lattice in two dimensions and the D3Q15 or D3Q19 lattice in three dimensions. Conversely, the proposed model does not suffer from such an error term and therefore the thermal LB equation can be constructed on the D3Q7 lattice, which simplifies the model and improves the computational efficiency. Numerical simulations are carried out to validate the accuracy and efficiency of the proposed thermal multiphase LB model for simulating liquid-vapor phase change. △ Less

Submitted 16 January, 2022; originally announced January 2022.

Comments: 27 pages, 7 figures

Journal ref: Physical Review E 105, 025308 (2022)

Spectrally multimode integrated SU(1,1) interferometer

Authors: Alessandro Ferreri, Matteo Santandrea, Michael Stefszky, Kai H. Luo, Harald Herrmann, Christine Silberhorn, Polina R. Sharapova

Abstract: Nonlinear SU(1,1) interferometers are fruitful and promising tools for spectral engineering and precise measurements with phase sensitivity below the classical bound. Such interferometers have been successfully realized in bulk and fiber-based configurations. However, rapidly develo** integrated technologies provide higher efficiencies, smaller footprints, and pave the way to quantum-enhanced on… ▽ More Nonlinear SU(1,1) interferometers are fruitful and promising tools for spectral engineering and precise measurements with phase sensitivity below the classical bound. Such interferometers have been successfully realized in bulk and fiber-based configurations. However, rapidly develo** integrated technologies provide higher efficiencies, smaller footprints, and pave the way to quantum-enhanced on-chip interferometry. In this work, we theoretically realised an integrated architecture of the multimode SU(1,1) interferometer which can be applied to various integrated platforms. The presented interferometer includes a polarization converter between two photon sources and utilizes a continuous-wave (CW) pump. Based on the potassium titanyl phosphate (KTP) platform, we show that this configuration results in almost perfect destructive interference at the output and supersensitivity regions below the classical limit. In addition, we discuss the fundamental difference between single-mode and highly multimode SU(1,1) interferometers in the properties of phase sensitivity and its limits. Finally, we explore how to improve the phase sensitivity by filtering the output radiation and using different seeding states in different modes with various detection strategies. △ Less

Submitted 26 May, 2021; v1 submitted 7 December, 2020; originally announced December 2020.

Journal ref: Quantum 5, 461 (2021)

A multi-component discrete Boltzmann model for nonequilibrium reactive flows

Authors: Chuandong Lin, Kai Hong Luo, Linlin Fei, Sauro Succi

Abstract: We propose a multi-component discrete Boltzmann model (DBM) for premixed, nonpremixed, or partially premixed nonequilibrium reactive flows. This model is suitable for both subsonic and supersonic flows with or without chemical reaction and/or external force. A two-dimensional sixteen-velocity model is constructed for the DBM. In the hydrodynamic limit, the DBM recovers the modified Navier-Stokes e… ▽ More We propose a multi-component discrete Boltzmann model (DBM) for premixed, nonpremixed, or partially premixed nonequilibrium reactive flows. This model is suitable for both subsonic and supersonic flows with or without chemical reaction and/or external force. A two-dimensional sixteen-velocity model is constructed for the DBM. In the hydrodynamic limit, the DBM recovers the modified Navier-Stokes equations for reacting species in a force field. Compared to standard lattice Boltzmann models, the DBM presents not only more accurate hydrodynamic quantities, but also detailed nonequilibrium effects that are essential yet long-neglected by traditional fluid dynamics. Apart from nonequilibrium terms (viscous stress and heat flux) in conventional models, specific hydrodynamic and thermodynamic nonequilibrium quantities (high order kinetic moments and their departure from equilibrium) are dynamically obtained from the DBM in a straightforward way. Due to its generality, the developed methodology is applicable to a wide range of phenomena across many energy technologies, emissions reduction, environmental protection, mining accident prevention, chemical and process industry. △ Less

Submitted 29 June, 2020; originally announced June 2020.

Comments: 13 Pages, 10 Figures

Journal ref: Scientific reports, 2017, 7.1: 1-12

A Deep Learning Framework for Hydrogen-fueled Turbulent Combustion Simulation

Authors: Jian An, Hanyi Wang, Bing Liu, Kai Hong Luo, Fei Qin, Guo Qiang He

Abstract: The high cost of high-resolution computational fluid/flame dynamics (CFD) has hindered its application in combustion related design, research and optimization. In this study, we propose a new framework for turbulent combustion simulation based on the deep learning approach. An optimized deep convolutional neural network (CNN) inspired from a U-Net architecture and inception module is designed for… ▽ More The high cost of high-resolution computational fluid/flame dynamics (CFD) has hindered its application in combustion related design, research and optimization. In this study, we propose a new framework for turbulent combustion simulation based on the deep learning approach. An optimized deep convolutional neural network (CNN) inspired from a U-Net architecture and inception module is designed for constructing the framework of the deep learning solver, named CFDNN. CFDNN is then trained on the simulation results of hydrogen combustion in a cavity with different inlet velocities. After training, CFDNN can not only accurately predict the flow and combustion fields within the range of the training set, but also shows an extrapolation ability for prediction outside the training set. The results from CFDNN solver show excellent consistency with the conventional CFD results in terms of both predicted spatial distributions and temporal dynamics. Meanwhile, two orders of magnitude of acceleration is achieved by using CFDNN solver compared to the conventional CFD solver. The successful development of such a deep learning-based solver opens up new possibilities of low-cost, high-accuracy simulations, fast prototy**, design optimization and real-time control of combustion systems such as gas turbines and scramjets. △ Less

Submitted 1 March, 2020; originally announced March 2020.

Artificial neural network based chemical mechanisms for computationally efficient modeling of kerosene combustion

Authors: Jian An, Guo Qiang He, Kai Hong Luo, Fei Qin, Bing Liu

Abstract: To effectively simulate the combustion of hydrocarbon-fueled supersonic engines, such as rocket-based combined cycle (RBCC) engines, a detailed mechanism for chemistry is usually required but computationally prohibitive. In order to accelerate chemistry calculation, an artificial neural network (ANN) based methodology was introduced in this study. This methodology consists of two different layers:… ▽ More To effectively simulate the combustion of hydrocarbon-fueled supersonic engines, such as rocket-based combined cycle (RBCC) engines, a detailed mechanism for chemistry is usually required but computationally prohibitive. In order to accelerate chemistry calculation, an artificial neural network (ANN) based methodology was introduced in this study. This methodology consists of two different layers: self-organizing map (SOM) and back-propagation neural network (BPNN). The SOM is for clustering the dataset into subsets to reduce the nonlinearity, while the BPNN is for regression for each subset. The entire methodology was subsequently employed to establish a skeleton mechanism of kerosene combustion with 41 species. The training data was generated by RANS simulations of the RBCC combustion chamber, and then fed into the SOM-BPNN with six different topologies (three different SOM topologies and two different BPNN topologies). By comparing the predicted results of six cases with those of the conventional ODE solver, it is found that if the topology is properly designed, high-precision results in terms of ignition, quenching and mass fraction prediction can be achieved. As for efficiency, 8~ 20 times speedup of the chemical system integration was achieved, indicating that it has great potential for application in complex chemical mechanisms for a variety of fuels. △ Less

Submitted 1 March, 2020; originally announced March 2020.

Multiple-relaxation-time discrete Boltzmann modeling of multicomponent mixture with nonequilibrium effects

Authors: Chuandong Lin, Kai H. Luo, Aiguo Xu, Yanbiao Gan, Huilin Lai

Abstract: A multiple-relaxation-time discrete Boltzmann model (DBM) is proposed for multicomponent mixtures, where compressible, hydrodynamic, and thermodynamic nonequilibrium effects are taken into account. It allows the specific heat ratio and the Prandtl number to be adjustable, and is suitable for both low and high speed fluid flows. From the physical side, besides being consistent with the multicompone… ▽ More A multiple-relaxation-time discrete Boltzmann model (DBM) is proposed for multicomponent mixtures, where compressible, hydrodynamic, and thermodynamic nonequilibrium effects are taken into account. It allows the specific heat ratio and the Prandtl number to be adjustable, and is suitable for both low and high speed fluid flows. From the physical side, besides being consistent with the multicomponent Navier-Stokes equations, Fick's law and Stefan-Maxwell diffusion equation in the hydrodynamic limit, the DBM provides more kinetic information about the nonequilibrium effects. The physical capability of DBM to describe the nonequilibrium flows, beyond the Navier-Stokes representation, enables the study of the entropy production mechanism in complex flows, especially in multicomponent mixtures. Moreover, the current kinetic model is employed to investigate nonequilibrium behaviors of the compressible Kelvin-Helmholtz instability (KHI). It is found that, in the dynamic KHI process, the mixing degree and fluid flow are similar for cases with various thermal conductivity and initial temperature configurations. Physically, both heat conduction and temperature exert slight influences on the formation and evolution of the KHI. △ Less

Submitted 9 June, 2020; v1 submitted 7 February, 2020; originally announced February 2020.

Journal ref: Phys. Rev. E 103, 013305 (2021)

Lattice Boltzmann modeling and simulation of forced-convection boiling on a cylinder

Authors: Shimpei Saito, Alessandro De Rosis, Linlin Fei, Kai H. Luo, Ken-ichi Ebihara, Akiko Kaneko, Yutaka Abe

Abstract: When boiling occurs in a liquid flow field, the phenomenon is known as forced-convection boiling. We numerically investigate such a boiling system on a cylinder in a flow at a saturated condition. To deal with the complicated liquid-vapor phase-change phenomenon, we develop a numerical scheme based on the pseudopotential lattice Boltzmann method (LBM). The collision stage is performed in the space… ▽ More When boiling occurs in a liquid flow field, the phenomenon is known as forced-convection boiling. We numerically investigate such a boiling system on a cylinder in a flow at a saturated condition. To deal with the complicated liquid-vapor phase-change phenomenon, we develop a numerical scheme based on the pseudopotential lattice Boltzmann method (LBM). The collision stage is performed in the space of central moments (CMs) to enhance numerical stability for high Reynolds numbers. The adopted forcing scheme, consistent with the CMs-based LBM, leads to a concise yet robust algorithm. Furthermore, additional terms required to ensure thermodynamic consistency are derived in a CMs framework. The effectiveness of the present scheme is successfully tested against a series of boiling processes, including nucleation, growth, and departure of a vapor bubble for Reynolds numbers varying between 30 and 30000. Our CMs-based LBM can reproduce all the boiling regimes, i.e., nucleate boiling, transition boiling, and film boiling, without any artificial input such as initial vapor phase. We find that the typical boiling curve, also known as the Nukiyama curve, appears even though the focused system is not the pool boiling but the forced-convection system. Also, our simulations support experimental observations of intermittent direct solid-liquid contact even in the film-boiling regime. Finally, we provide quantitative comparison with the semi-empirical correlations for the forced-convection film boiling on a cylinder on the Nu-Ja diagram. △ Less

Submitted 4 January, 2021; v1 submitted 4 December, 2019; originally announced December 2019.

Comments: 23 pages, 21 figures

Journal ref: Physics of Fluids 33 (2021)

Discrete fluidization of dense monodisperse emulsions in neutral wetting microchannels

Authors: Linlin Fei, Andrea Scagliarini, Kai H. Luo, Sauro Succi

Abstract: The rheology of pressure-driven flows of two-dimensional dense monodisperse emulsions in neutral wetting microchannels is investigated by means of mesoscopic lattice simulations, capable of handling large collections of droplets, in the order of several hundreds. The simulations reveal that the fluidization of the emulsion proceeds through a sequence of discrete steps, characterized by yielding ev… ▽ More The rheology of pressure-driven flows of two-dimensional dense monodisperse emulsions in neutral wetting microchannels is investigated by means of mesoscopic lattice simulations, capable of handling large collections of droplets, in the order of several hundreds. The simulations reveal that the fluidization of the emulsion proceeds through a sequence of discrete steps, characterized by yielding events whereby layers of droplets start rolling over each other, thus leading to sudden drops of the relative effective viscosity. It is shown that such discrete fluidization is robust against loss of confinement, namely it persists also in the regime of small ratios of the droplet diameter over the microchannel width. We also develop a simple phenomenological model which predicts a linear relation between the relative effective viscosity of the emulsion and the product of the confinement parameter (global size of the device over droplet radius) and the viscosity ratio between the disperse and continuous phases. The model shows excellent agreement with the numerical simulations. The present work offers new insights to enable the design of microfluidic scaffolds for tissue engineering applications and paves the way to detailed rheological studies of soft-glassy materials in complex geometries. △ Less

Submitted 30 November, 2019; v1 submitted 4 October, 2019; originally announced October 2019.

Comments: 8 pages, 8 figures

Journal ref: Soft Matter, 2019

Implementation of contact angles in the pseudopotential lattice Boltzmann simulations with curved boundaries

Authors: Q. Li, Y. Yu, Kai H. Luo

Abstract: The pseudopotential multiphase lattice Boltzmann (LB) model is a very popular model in the LB community for simulating multiphase flows. When the multiphase modeling involves a solid boundary, a numerical scheme is required to simulate the contact angle at the solid boundary. In this work, we aim at investigating the implementation of contact angles in the pseudopotential LB simulations with curve… ▽ More The pseudopotential multiphase lattice Boltzmann (LB) model is a very popular model in the LB community for simulating multiphase flows. When the multiphase modeling involves a solid boundary, a numerical scheme is required to simulate the contact angle at the solid boundary. In this work, we aim at investigating the implementation of contact angles in the pseudopotential LB simulations with curved boundaries. In the pseudopotential LB model, the contact angle is usually realized by employing a solid-fluid interaction or specifying a constant virtual wall density. However, it is shown that the solid-fluid interaction scheme yields very large spurious currents in the simulations involving curved boundaries, while the virtual-density scheme produces an unphysical thick mass-transfer layer near the solid boundary although it gives much smaller spurious currents. We also extend the geometric-formulation scheme in the phase-field method to the pseudopotential LB model. Nevertheless, in comparison with the solid-fluid interaction scheme and the virtual-density scheme, the geometric-formulation scheme is relatively difficult to implement for curved boundaries and cannot be directly applied to three-dimensional space. By analyzing the features of these three schemes, we propose an improved virtual-density scheme to implement contact angles in the pseudopotential LB simulations with curved boundaries, which does not suffer from a thick mass-transfer layer near the solid boundary and retains the advantages of the original virtual-density scheme, i.e., simplicity, easiness for implementation, and low spurious currents. △ Less

Submitted 5 November, 2019; v1 submitted 12 August, 2019; originally announced August 2019.

Comments: 26 pages, 14 figures

Journal ref: Phys. Rev. E 100, 053313 (2019)

Improved three-dimensional color-gradient lattice Boltzmann model for immiscible multiphase flows

Authors: Z. X. Wen, Q. Li, Y. Yu, Kai. H. Luo

Abstract: In this paper, an improved three-dimensional color-gradient lattice Boltzmann (LB) model is proposed for simulating immiscible multiphase flows. Compared with the previous three-dimensional color-gradient LB models, which suffer from the lack of Galilean invariance and considerable numerical errors in many cases owing to the error terms in the recovered macroscopic equations, the present model eli… ▽ More In this paper, an improved three-dimensional color-gradient lattice Boltzmann (LB) model is proposed for simulating immiscible multiphase flows. Compared with the previous three-dimensional color-gradient LB models, which suffer from the lack of Galilean invariance and considerable numerical errors in many cases owing to the error terms in the recovered macroscopic equations, the present model eliminates the error terms and therefore improves the numerical accuracy and enhances the Galilean invariance. To validate the proposed model, numerical simulation are performed. First, the test of a moving droplet in a uniform flow field is employed to verify the Galilean invariance of the improved model. Subsequently, numerical simulations are carried out for the layered two-phase flow and three-dimensional Rayleigh-Taylor instability. It is shown that, using the improved model, the numerical accuracy can be significantly improved in comparison with the color-gradient LB model without the improvements. Finally, the capability of the improved color-gradient LB model for simulating dynamic multiphase flows at a relatively large density ratio is demonstrated via the simulation of droplet impact on a solid surface. △ Less

Submitted 7 April, 2019; originally announced April 2019.

Comments: 9 Figures

Journal ref: Phys. Rev. E 100, 023301 (2019)

Mesoscopic model for soft flowing systems with tunable viscosity ratio

Authors: Linlin Fei, Andrea Scagliarini, Andrea Montessori, Marco Lauricella, Sauro Succi, Kai H. Luo

Abstract: We propose a mesoscopic model of binary fluid mixtures with tunable viscosity ratio based on a two-range pseudo-potential lattice Boltzmann method, for the simulation of soft flowing systems. In addition to the short range repulsive interaction between species in the classical single-range model, a competing mechanism between the short-range attractive and mid-range repulsive interactions is impos… ▽ More We propose a mesoscopic model of binary fluid mixtures with tunable viscosity ratio based on a two-range pseudo-potential lattice Boltzmann method, for the simulation of soft flowing systems. In addition to the short range repulsive interaction between species in the classical single-range model, a competing mechanism between the short-range attractive and mid-range repulsive interactions is imposed within each species. Besides extending the range of attainable surface tension as compared with the single-range model, the proposed scheme is also shown to achieve a positive disjoining pressure, independently of the viscosity ratio. The latter property is crucial for many microfluidic applications involving a collection of disperse droplets with a different viscosity from the continuum phase. As a preliminary application, the relative effective viscosity of a pressure-driven emulsion in a planar channel is computed. △ Less

Submitted 19 October, 2020; v1 submitted 18 June, 2018; originally announced June 2018.

Comments: 16 pages, 15 figures

Report number: PHYSICAL REVIEW FLUIDS 3, 104304 (2018)

Journal ref: Phys. Rev. Fluids 3, 104304 (2018)

Three-dimensional non-orthogonal multiple-relaxation-time lattice Boltzmann model for multiphase flows

Authors: Q. Li, D. H. Du, L. L. Fei, Kai H. Luo, Y. Yu

Abstract: In the classical multiple-relaxation-time (MRT) lattice Boltzmann (LB) method, the transformation matrix is formed by constructing a set of orthogonal basis vectors. In this paper, a theoretical and numerical study is performed to investigate the capability and efficiency of a non-orthogonal MRT-LB model for simulating multiphase flows. First, a three-dimensional non-orthogonal MRT-LB is proposed.… ▽ More In the classical multiple-relaxation-time (MRT) lattice Boltzmann (LB) method, the transformation matrix is formed by constructing a set of orthogonal basis vectors. In this paper, a theoretical and numerical study is performed to investigate the capability and efficiency of a non-orthogonal MRT-LB model for simulating multiphase flows. First, a three-dimensional non-orthogonal MRT-LB is proposed. A non-orthogonal MRT collision operator is devised based on a set of non-orthogonal basis vectors, through which the transformation matrix and its inverse matrix are considerably simplified as compared with those of an orthogonal MRT collision operator. Furthermore, through the Chapman-Enskog analysis, it is theoretically demonstrated that the three-dimensional non-orthogonal MRT-LB model can correctly recover the macroscopic equations at the Navier-Stokes level in the low Mach number limit. Numerical comparisons between the non-orthogonal MRT-LB model and the usual orthogonal MRT-LB model are made by simulating multiphase flows on the basis of the pseudopotential multiphase LB approach. The numerical results show that, in comparison with the usual orthogonal MRT-LB model, the non-orthogonal MRT-LB model can retain the numerical accuracy while simplifying the implementation. △ Less

Submitted 22 May, 2018; originally announced May 2018.

Comments: 28 pages, 10 figures

Journal ref: Computers and Fluids 186 (2019) 128-140

Three-dimensional cascaded lattice Boltzmann method: improved implementation and consistent forcing scheme

Authors: Linlin Fei, Kai Hong Luo, Qing Li

Abstract: Cascaded or central-moment-based lattice Boltzmann method (CLBM) proposed in [Geier \textit{et al.}, Phys. Rev. E \textbf{63}, 066705 (2006)] possesses very good numerical stability. However, two constraints exist in three-dimensional (3D) CLBM simulations. Firstly, the conventional implementation for 3D CLBM involves cumbersome operations and requires much higher computational cost compared to th… ▽ More Cascaded or central-moment-based lattice Boltzmann method (CLBM) proposed in [Geier \textit{et al.}, Phys. Rev. E \textbf{63}, 066705 (2006)] possesses very good numerical stability. However, two constraints exist in three-dimensional (3D) CLBM simulations. Firstly, the conventional implementation for 3D CLBM involves cumbersome operations and requires much higher computational cost compared to the single-relaxation-time (SRT) LBM. Secondly, it is a challenge to accurately incorporate a general force field into the 3D CLBM. In this paper, we present an improved method to implement CLBM in 3D. The main strategy is to adopt a simplified central moment set, and carry out the central-moment-based collision operator based on a general multi-relaxation-time (GMRT) framework. Next, the recently proposed consistent forcing scheme in CLBM [L. Fei and K. H. Luo, Phys. Rev. E \textbf{96}, 053307 (2017)] is extended to incorporate a general force field into 3D CLBM. Compared with the recently developed non-orthogonal CLBM [A. D. Rosis, Phys. Rev. E \textbf{95}, 013310 (2017)], our implementation is proved to reduce the computational cost significantly. The inconsistency of adopting the discrete equilibrium distribution functions (EDFs) in the non-orthogonal CLBM is revealed and discussed. The 3D CLBM developed here in conjunction with the consistent forcing scheme is verified through numerical simulations of several canonical force-driven flows, highlighting very good properties in terms of accuracy, convergence and consistency with the nonslip rule. Finally, the techniques developed here for 3D CLBM can be applied to make the implementation and execution of 3D MRT-LBM much more efficient. △ Less

Submitted 22 January, 2018; v1 submitted 14 January, 2018; originally announced January 2018.

Comments: 16 pages, 14 figures

Report number: PHYSICAL REVIEW E 97, 053309 (2018)

Journal ref: Phys. Rev. E 97, 053309 (2018)

Cascaded lattice Boltzmann method for incompressible thermal flows with heat sources and general thermal boundary conditions

Authors: Linlin Fei, Kai Hong Luo

Abstract: Cascaded or central-moment-based lattice Boltzmann method (CLBM) is a relatively recent development in the LBM community, which has better numerical stability and naturally achieves better Galilean invariance for a specified lattice compared with the classical single-relation-time (SRT) LBM. Recently, CLBM has been extended to simulate thermal flows based on the double-distribution-function (DDF)… ▽ More Cascaded or central-moment-based lattice Boltzmann method (CLBM) is a relatively recent development in the LBM community, which has better numerical stability and naturally achieves better Galilean invariance for a specified lattice compared with the classical single-relation-time (SRT) LBM. Recently, CLBM has been extended to simulate thermal flows based on the double-distribution-function (DDF) approach [L. Fei \textit{et al.}, Int. J. Heat Mass Transfer 120, 624 (2018)]. In this work, CLBM is further extended to simulate thermal flows involving complex thermal boundary conditions and/or a heat source. Particularly, a discrete source term in the central-moment space is proposed to include a heat source, and a general bounce-back scheme is employed to implement thermal boundary conditions. The numerical results for several canonical problems are in good agreement with the analytical solutions and/or numerical results in the literature, which verifies the present CLBM implementation for thermal flows. △ Less

Submitted 14 January, 2018; originally announced January 2018.

Comments: DSFD2017

Journal ref: Computers & Fluids 165, 89 (2018)

Modeling incompressible thermal flows using a central-moment-based lattice Boltzmann method

Authors: Linlin Fei, K. H. Luo, Chuandong Lin, Qing Li

Abstract: In this paper, a central-moment-based lattice Boltzmann (CLB) method for incompressible thermal flows is proposed. In the method, the incompressible Navier-Stokes equations and the convection-diffusion equation for the temperature field are sloved separately by two different CLB equations. Through the Chapman-Enskog analysis, the macroscopic governing equations for incompressible thermal flows can… ▽ More In this paper, a central-moment-based lattice Boltzmann (CLB) method for incompressible thermal flows is proposed. In the method, the incompressible Navier-Stokes equations and the convection-diffusion equation for the temperature field are sloved separately by two different CLB equations. Through the Chapman-Enskog analysis, the macroscopic governing equations for incompressible thermal flows can be reproduced. For the flow field, the tedious implementation for CLB method is simplified by using the shift matrix with a simplified central-moment set, and the consistent forcing scheme is adopted to incorporate forcing effects. Compared with several D2Q5 multiple-relaxation-time (MRT) lattice Boltzmann methods for the temperature equation, the proposed method is shown to be better Galilean invariant through measuring the thermal diffusivities on a moving reference frame. Thus a higher Mach number can be used for convection flows, which decreases the computational load significantly. Numerical simulations for several typical problems confirm the accuracy, efficiency, and stability of the present method. The grid convergence tests indicate that the proposed CLB method for incompressible thermal flows is of second-order accuracy in space. △ Less

Submitted 29 October, 2017; originally announced October 2017.

Journal ref: Int. J. Heat Mass Transfer 120, 624 (2018)

Modified Two-Photon Interference Achieved by the Manipulation of Entanglement

Authors: P. R. Sharapova, K. H. Luo, H. Herrmann, M. Reichelt, C. Silberhorn, T. Meier

Abstract: In this theoretical study we demonstrate that entangled states are able to significantly extend the functionality of Hong-Ou-Mandel (HOM) interferometers. By generating a coherent superposition of parametric-down-conversion photons and spatial entanglement in the input channel, the coincidence probability measured at the output changes from a typical HOM-type dip (photon bunching) into much richer… ▽ More In this theoretical study we demonstrate that entangled states are able to significantly extend the functionality of Hong-Ou-Mandel (HOM) interferometers. By generating a coherent superposition of parametric-down-conversion photons and spatial entanglement in the input channel, the coincidence probability measured at the output changes from a typical HOM-type dip (photon bunching) into much richer patterns including an anti-bunching peak and rapid oscillation fringes with twice the optical frequency. The considered system should be realizable on a single chip using current waveguide technology in the $LiNbO_3$ platform. △ Less

Submitted 6 February, 2018; v1 submitted 9 June, 2017; originally announced June 2017.

Journal ref: Phys. Rev. A 96, 043857 (2017)

Consistent forcing scheme in the cascaded lattice Boltzmann method

Authors: Linlin Fei, K. H. Luo

Abstract: In this paper, we give a more pellucid derivation for the cascaded lattice Boltzmann method (CLBM) based on a general multiple-relaxation-time (MRT) frame through defining a shift matrix. When the shift matrix is a unit matrix, the CLBM degrades into an MRT LBM. Based on this, a consistent forcing scheme is developed for the CLBM. The applicability of the non-slip rule, the second-order convergenc… ▽ More In this paper, we give a more pellucid derivation for the cascaded lattice Boltzmann method (CLBM) based on a general multiple-relaxation-time (MRT) frame through defining a shift matrix. When the shift matrix is a unit matrix, the CLBM degrades into an MRT LBM. Based on this, a consistent forcing scheme is developed for the CLBM. The applicability of the non-slip rule, the second-order convergence rate in space and the property of isotropy for the consistent forcing scheme is demonstrated through the simulation of several canonical problems. Several other existing force schemes previously used in the CLBM are also examined. The study clarifies the relation between MRT LBM and CLBM under a general framework. △ Less

Submitted 2 June, 2017; v1 submitted 31 May, 2017; originally announced May 2017.

Journal ref: Phys. Rev. E 96, 053307 (2017)

Toolbox for the design of $LiNbO_3$-based passive and active integrated quantum circuits

Authors: P. R. Sharapova, K. H. Luo, H. Herrmann, M. Reichelt, T. Meier, C. Silberhorn

Abstract: We present and discuss perspectives of current developments on advanced quantum optical circuits monolithically integrated in the lithium niobate platform. A set of basic components comprising photon pair sources based on parametric down conversion (PDC), passive routing elements and active electro-optically controllable switches and polarisation converters are building blocks of a toolbox which i… ▽ More We present and discuss perspectives of current developments on advanced quantum optical circuits monolithically integrated in the lithium niobate platform. A set of basic components comprising photon pair sources based on parametric down conversion (PDC), passive routing elements and active electro-optically controllable switches and polarisation converters are building blocks of a toolbox which is the basis for a broad range of diverse quantum circuits. We review the state-of-the-art of these components and provide models that properly describe their performance in quantum circuits. As an example for applications of these models we discuss design issues for a circuit providing on-chip two-photon interference. The circuit comprises a PDC section for photon pair generation followed by an actively controllable modified Mach-Zehnder structure for observing Hong-Ou-Mandel (HOM) interference. The performance of such a chip is simulated theoretically by taking even imperfections of the properties of the individual components into account. △ Less

Submitted 6 February, 2018; v1 submitted 12 April, 2017; originally announced April 2017.

Thermal cascaded lattice Boltzmann method

Authors: Linlin Fei, K. H. Luo

Abstract: In this paper, a thermal cascaded lattice Boltzmann method (TCLBM) is developed in combination with the double-distribution-function (DDF) approach. A density distribution function relaxed by the cascaded scheme is employed to solve the flow field, and a total energy distribution function relaxed by the BGK scheme is used to solve temperature field, where two distribution functions are coupled nat… ▽ More In this paper, a thermal cascaded lattice Boltzmann method (TCLBM) is developed in combination with the double-distribution-function (DDF) approach. A density distribution function relaxed by the cascaded scheme is employed to solve the flow field, and a total energy distribution function relaxed by the BGK scheme is used to solve temperature field, where two distribution functions are coupled naturally. The forcing terms are incorporated by means of central moments, which is consistent with the previous force scheme [Premnath \emph{et al.}, Phys. Rev. E \textbf{80}, 036702 (2009)] but the derivation is more intelligible and the evolution process is simpler. In the method, the viscous heat dissipation and compression work are taken into account, the Prandtl number and specific-heat ratio are adjustable, the external force is considered directly without the Boussinesq assumption, and the low-Mach number compressible flows can also be simulated. The forcing scheme is tested by simulating a steady Taylor-Green flow, and the new TCLBM is then tested by numerical experiments of the thermal Couette flow, low-Mach number shock tube problem, and Rayleigh-Bénard convection. The simulation results agree well with the analytical solutions and/or results given by previous researchers. △ Less

Submitted 22 October, 2016; originally announced October 2016.

A two-channel, spectrally degenerate polarization entangled source on chip

Authors: Linda Sansoni, Kai Hong Luo, Christof Eigner, Raimund Ricken, Viktor Quiring, Harald Herrmann, Christine Silberhorn

Abstract: Integrated optics provides the platform for the experimental implementation of highly complex and compact circuits for quantum information applications. In this context integrated waveguide sources represent a powerful resource for the generation of quantum states of light due to their high brightness and stability. However, the confinement of the light in a single spatial mode limits the realizat… ▽ More Integrated optics provides the platform for the experimental implementation of highly complex and compact circuits for quantum information applications. In this context integrated waveguide sources represent a powerful resource for the generation of quantum states of light due to their high brightness and stability. However, the confinement of the light in a single spatial mode limits the realization of multi-channel sources. Due to this challenge one of the most adopted sources in quantum information processes, i.e. a source which generates spectrally indistinguishable polarization entangled photons in two different spatial modes, has not yet been realized in a fully integrated platform. Here we overcome this limitation by suitably engineering two periodically poled waveguides and an integrated polarization splitter in lithium niobate. This source produces polarization entangled states with fidelity of F = 0.973(3) and a test of Bell's inequality results in a violation larger than 14 standard deviations. It can work both in pulsed and continuous wave regime. This device represents a new step toward the implementation of fully integrated circuits for quantum information applications. △ Less

Submitted 15 April, 2016; v1 submitted 12 April, 2016; originally announced April 2016.

Comments: 5 pages, 4 figures + supplementary material + corrected typos

Journal ref: npj Quantum Information 3, 5 (2017)

Lattice Boltzmann methods for multiphase flow and phase-change heat transfer

Authors: Qing Li, K. H. Luo, Q. J. Kang, Y. L. He, Q. Chen, Q. Liu

Abstract: Over the past few decades, tremendous progress has been made in the development of particle-based discrete simulation methods versus the conventional continuum-based methods. In particular, the lattice Boltzmann (LB) method has evolved from a theoretical novelty to a ubiquitous, versatile and powerful computational methodology for both fundamental research and engineering applications. It is a kin… ▽ More Over the past few decades, tremendous progress has been made in the development of particle-based discrete simulation methods versus the conventional continuum-based methods. In particular, the lattice Boltzmann (LB) method has evolved from a theoretical novelty to a ubiquitous, versatile and powerful computational methodology for both fundamental research and engineering applications. It is a kinetic-based mesoscopic approach that bridges the microscales and macroscales, which offers distinctive advantages in simulation fidelity and computational efficiency. Applications of the LB method have been found in a wide range of disciplines including physics, chemistry, materials, biomedicine and various branches of engineering. The present work provides a comprehensive review of the LB method for thermofluids and energy applications, focusing on multiphase flows, thermal flows and thermal multiphase flows with phase change. The review first covers the theoretical framework of the LB method, revealing the existing inconsistencies and defects as well as common features of multiphase and thermal LB models. Recent developments in improving the thermodynamic and hydrodynamic consistency, reducing the spurious currents, enhancing the numerical stability, etc., are highlighted. These efforts have put the LB method on a firmer theoretical foundation with enhanced LB models that can achieve larger liquid-gas density ratio, higher Reynolds number and flexible surface tension. Examples of applications are provided in fuel cells and batteries, droplet collision, boiling heat transfer and evaporation, and energy storage. Finally, further developments and future prospect of the LB method are outlined for thermofluids and energy applications. △ Less

Submitted 7 October, 2015; v1 submitted 4 August, 2015; originally announced August 2015.

Comments: a Review, 127 pages, 28 figures, accepted by Progress in Energy and Combustion Science

Journal ref: Progress in Energy and Combustion Science, 52, 62-105 (2016)

Lattice Boltzmann modeling of boiling heat transfer: The boiling curve and the effects of wettability

Authors: Q. Li, Q. J. Kang, M. M. Francois, Y. L. He, K. H. Luo

Abstract: A hybrid thermal lattice Boltzmann (LB) model is presented to simulate thermal multiphase flows with phase change based on an improved pseudopotential LB approach [Q. Li, K. H. Luo, and X. J. Li, Phys. Rev. E 87, 053301 (2013)]. The present model does not suffer from the spurious term caused by the forcing-term effect, which was encountered in some previous thermal LB models for liquid-vapor phase… ▽ More A hybrid thermal lattice Boltzmann (LB) model is presented to simulate thermal multiphase flows with phase change based on an improved pseudopotential LB approach [Q. Li, K. H. Luo, and X. J. Li, Phys. Rev. E 87, 053301 (2013)]. The present model does not suffer from the spurious term caused by the forcing-term effect, which was encountered in some previous thermal LB models for liquid-vapor phase change. Using the model, the liquid-vapor boiling process is simulated. The boiling curve together with the three boiling stages (nucleate boiling, transition boiling, and film boiling) is numerically reproduced in the LB community for the first time. The numerical results show that the basic features and the fundamental characteristics of boiling heat transfer are well captured, such as the severe fluctuation of transient heat flux in the transition boiling and the feature that the maximum heat transfer coefficient lies at a lower wall superheat than that of the maximum heat flux. Furthermore, the effects of the heating surface wettability on boiling heat transfer are investigated. It is found that an increase in contact angle promotes the onset of boiling but reduces the critical heat flux, and makes the boiling process enter into the film boiling regime at a lower wall superheat, which is consistent with the findings from experimental studies. △ Less

Submitted 15 January, 2015; originally announced January 2015.

Comments: 13 Figures

Journal ref: International Journal of Heat and Mass Transfer 85 (2015) 787-796

Contact angles in the pseudopotential lattice Boltzmann modeling of wetting

Authors: Q. Li, K. H. Luo, Q. J. Kang, Q. Chen

Abstract: In this paper, we aim to investigate the implementation of contact angles in the pseudopotential lattice Boltzmann modeling of wetting at a large density ratio. The pseudopotential lattice Boltzmann model [X. Shan and H. Chen, Phys. Rev. E 49, 2941 (1994)] is a popular mesoscopic model for simulating multiphase flows and interfacial dynamics. In this model, the contact angle is usually realized by… ▽ More In this paper, we aim to investigate the implementation of contact angles in the pseudopotential lattice Boltzmann modeling of wetting at a large density ratio. The pseudopotential lattice Boltzmann model [X. Shan and H. Chen, Phys. Rev. E 49, 2941 (1994)] is a popular mesoscopic model for simulating multiphase flows and interfacial dynamics. In this model, the contact angle is usually realized by a fluid-solid interaction. Two widely used fluid-solid interactions: the density-based interaction and the pseudopotential-based interaction, as well as a modified pseudopotential-based interaction formulated in the present paper, are numerically investigated and compared in terms of the achievable contact angles, the maximum and the minimum densities, and the spurious currents. It is found that the pseudopotential-based interaction works well for simulating small static (liquid) contact angles, however, is unable to reproduce static contact angles close to 180 degrees. Meanwhile, it is found that the proposed modified pseudopotential-based interaction performs better in light of the maximum and the minimum densities and is overall more suitable for simulating large contact angles as compared with the other two types of fluid-solid interactions. Furthermore, the spurious currents are found to be enlarged when the fluid-solid interaction force is introduced. Increasing the kinematic viscosity ratio between the vapor and liquid phases is shown to be capable of reducing the spurious currents caused by the fluid-solid interactions. △ Less

Submitted 20 October, 2014; v1 submitted 9 October, 2014; originally announced October 2014.

Comments: 11 figures, Accepted by Physical Review E

Journal ref: Physical Review E 90, 053301 (2014)

Effect of the forcing term in the pseudopotential lattice Boltzmann modeling of thermal flows

Authors: Q. Li, K. H. Luo

Abstract: The pseudopotential lattice Boltzmann (LB) model is a popular model in the LB community for simulating multiphase flows. Recently, several thermal LB models, which are based on the pseudopotential LB model and constructed within the framework of the double-distribution-function LB method, were proposed to simulate thermal multiphase flows [G. Házi and A. Márkus, Phys. Rev. E 77, 026305 (2008); L.… ▽ More The pseudopotential lattice Boltzmann (LB) model is a popular model in the LB community for simulating multiphase flows. Recently, several thermal LB models, which are based on the pseudopotential LB model and constructed within the framework of the double-distribution-function LB method, were proposed to simulate thermal multiphase flows [G. Házi and A. Márkus, Phys. Rev. E 77, 026305 (2008); L. Biferale et al., Phys. Rev. Lett. 108, 104502 (2012); S. Gong and P. Cheng, Int. J. Heat Mass Transfer 55, 4923 (2012)]. The objective of the present paper is to show that the effect of the forcing term on the temperature equation must be eliminated in the pseudopotential LB modeling of thermal flows. First, the effect of the forcing term on the temperature equation is shown via the Chapman-Enskog analysis. For comparison, alternative treatments that are free from the forcing-term effect are provided. Subsequently, numerical investigations are performed for two benchmark tests. The numerical results clearly show that the existence of the forcing-term effect will lead to significant numerical errors in the pseudopotential LB modeling of thermal flows. △ Less

Submitted 9 May, 2014; originally announced May 2014.

Comments: 3 Figures, 2 Tables, accepted by Physical Review E

Journal ref: Physical Review E 89, 053022 (2014)

Achieving tunable surface tension in the pseudopotential lattice Boltzmann modeling of multiphase flows

Authors: Q. Li, K. H. Luo

Abstract: In this paper, we aim to address an important issue about the pseudopotential lattice Boltzmann (LB) model, which has attracted much attention as a mesoscopic model for simulating interfacial dynamics of complex fluids, but suffers from the problem that the surface tension cannot be tuned independently of the density ratio. In the literature, a multi-range potential was devised to adjust the surfa… ▽ More In this paper, we aim to address an important issue about the pseudopotential lattice Boltzmann (LB) model, which has attracted much attention as a mesoscopic model for simulating interfacial dynamics of complex fluids, but suffers from the problem that the surface tension cannot be tuned independently of the density ratio. In the literature, a multi-range potential was devised to adjust the surface tension [Sbragaglia et al., Phys. Rev. E 75, 026702 (2007)]. However, it was recently found that the density ratio of the system will be changed when the multi-range potential is employed to adjust the surface tension. A new approach is therefore proposed in the present work. The basic strategy is to add a source term to the LB equation so as to tune the surface tension of the pseudopotential LB model. The proposed approach can guarantee that the adjustment of the surface tension does not affect the mechanical stability condition of the pseudopotential LB model, and thus provides a separate control of the surface tension and the density ratio. Meanwhile, it still retains the mesoscopic feature and the computational simplicity of the pseudopotential LB model. Numerical simulations are carried out for stationary droplets, capillary waves, and droplet splashing on a thin liquid film. The numerical results demonstrate that the proposed approach is capable of achieving a tunable surface tension over a very wide range and can keep the density ratio unchanged when adjusting the surface tension. △ Less

Submitted 14 October, 2013; v1 submitted 27 June, 2013; originally announced June 2013.

Comments: 6 Figures, 5 Tables

Journal ref: Physical Review E 88, 053307 (2013)

Lattice Boltzmann modeling of multiphase flows at large density ratio with an improved pseudopotential model

Authors: Q. Li, K. H. Luo, X. J. Li

Abstract: Owing to its conceptual simplicity and computational efficiency, the pseudopotential multiphase lattice Boltzmann (LB) model has attracted significant attention since its emergence. In this work, we aim to extend the pseudopotential LB model to simulate multiphase flows at large density ratio and relatively high Reynolds number. First, based on our recent work [Li et al., Phys. Rev. E. 86, 016709… ▽ More Owing to its conceptual simplicity and computational efficiency, the pseudopotential multiphase lattice Boltzmann (LB) model has attracted significant attention since its emergence. In this work, we aim to extend the pseudopotential LB model to simulate multiphase flows at large density ratio and relatively high Reynolds number. First, based on our recent work [Li et al., Phys. Rev. E. 86, 016709 (2012)], an improved forcing scheme is proposed for the multiple-relaxation-time pseudopotential LB model in order to achieve thermodynamic consistency and large density ratio in the model. Next, through investigating the effects of the parameter a in the Carnahan-Starling equation of state, we find that the interface thickness is approximately proportional to 1/sqrt(a). Using a smaller a will lead to a wider interface thickness, which can reduce the spurious currents and enhance the numerical stability of the pseudopotential model at large density ratio. Furthermore, it is found that a lower liquid viscosity can be gained in the pseudopotential model by increasing the kinematic viscosity ratio between the vapor and liquid phases. The improved pseudopotential LB model is numerically validated via the simulations of stationary droplet and droplet oscillation. Using the improved model as well as the above treatments, numerical simulations of droplet splashing on a thin liquid film are conducted at a density ratio in excess of 500 with Reynolds numbers ranging from 40 to 1000. The dynamics of droplet splashing is correctly reproduced and the predicted spread radius is found to obey the power law reported in the literature. △ Less

Submitted 29 April, 2013; v1 submitted 29 November, 2012; originally announced November 2012.

Comments: 9 figures, 2 tables, accepted by Physical Review E (in press)

Journal ref: Physical Review E 87, 053301 (2013) (final version)

Lattice Boltzmann method for relativistic hydrodynamics: Issues on conservation law of particle number and discontinuities

Authors: Q. Li, K. H. Luo, X. J. Li

Abstract: In this paper, we aim to address several important issues about the recently developed lattice Boltzmann (LB) model for relativistic hydrodynamics [M. Mendoza et al., Phys. Rev. Lett. 105, 014502 (2010); Phys. Rev. D 82, 105008 (2010)]. First, we study the conservation law of particle number in the relativistic LB model. Through the Chapman-Enskog analysis, it is shown that in the relativistic LB… ▽ More In this paper, we aim to address several important issues about the recently developed lattice Boltzmann (LB) model for relativistic hydrodynamics [M. Mendoza et al., Phys. Rev. Lett. 105, 014502 (2010); Phys. Rev. D 82, 105008 (2010)]. First, we study the conservation law of particle number in the relativistic LB model. Through the Chapman-Enskog analysis, it is shown that in the relativistic LB model the conservation equation of particle number is a convection-diffusion equation rather than a continuity equation, which makes the evolution of particle number dependent on the relaxation time. Furthermore, we investigate the origin of the discontinuities appeared in the relativistic problems with high viscosities, which were reported in a recent study [D. Hupp et al., Phys. Rev. D 84, 125015 (2011)]. A multiple-relaxation-time (MRT) relativistic LB model is presented to examine the influences of different relaxation times on the discontinuities. Numerical experiments show the discontinuities can be eliminated by setting the relaxation time $τ_e$ (related to the bulk viscosity) to be sufficiently smaller than the relaxation time $τ_v$ (related to the shear viscosity). Meanwhile, it is found that the relaxation time $τ_\varepsilon$, which has no effect on the conservation equations at the Navier-Stokes level, will affect the numerical accuracy of the relativistic LB model. Moreover, the accuracy of the relativistic LB model for simulating moderately relativistic problems is also investigated. △ Less

Submitted 14 November, 2012; originally announced November 2012.

Comments: 7 figures

Journal ref: Physical Review D 86, 085044 (2012)

Forcing scheme in pseudopotential lattice Boltzmann model for multiphase flows

Authors: Q. Li, K. H. Luo, X. J. Li

Abstract: The pseudo-potential lattice Boltzmann (LB) model is a widely used multiphase model in the LB community. In this model, an interaction force, which is usually implemented via a forcing scheme, is employed to mimic the molecular interactions that cause phase segregation. The forcing scheme is therefore expected to play an important role in the pseudo-potential LB model. In this paper, we aim to add… ▽ More The pseudo-potential lattice Boltzmann (LB) model is a widely used multiphase model in the LB community. In this model, an interaction force, which is usually implemented via a forcing scheme, is employed to mimic the molecular interactions that cause phase segregation. The forcing scheme is therefore expected to play an important role in the pseudo-potential LB model. In this paper, we aim to address some key issues about forcing schemes in the pseudo-potential LB model. Firstly, theoretical and numerical analyses will be made for Shan-Chen's forcing scheme and the exact-difference-method (EDM) forcing scheme. The nature of these two schemes and their recovered macroscopic equations will be shown. Secondly, through a theoretical analysis, we will reveal the physics behind the phenomenon that different forcing schemes exhibit different performances in the pseudo-potential LB model. Moreover, based on the analysis, we will present an improved forcing scheme and numerically demonstrate that the improved scheme can be treated as an alternative approach for achieving thermodynamic consistency in the pseudo-potential LB model. △ Less

Submitted 18 April, 2012; originally announced April 2012.

Comments: 7 figures

Journal ref: Physical Review E 86, 016709 (2012)

Additional interfacial force in lattice Boltzmann models for incompressible multiphase flows

Authors: Q. Li, K. H. Luo, Y. J. Gao

Abstract: The existing lattice Boltzmann models for incompressible multiphase flows are mostly constructed with two distribution functions, one is the order parameter distribution function, which is used to track the interface between different phases, and the other is the pressure distribution function for solving the velocity field. In this brief report, it is shown that in these models the recovered mome… ▽ More The existing lattice Boltzmann models for incompressible multiphase flows are mostly constructed with two distribution functions, one is the order parameter distribution function, which is used to track the interface between different phases, and the other is the pressure distribution function for solving the velocity field. In this brief report, it is shown that in these models the recovered momentum equation is inconsistent with the target one: an additional interfacial force is included in the recovered momentum equation. The effects of the additional force are investigated by numerical simulations of droplet splashing on a thin liquid film and falling droplet under gravity. In the former test, it is found that the formation and evolution of secondary droplets are greatly affected, while in the latter the additional force is found to increase the falling velocity and limit the stretch of the droplet. △ Less

Submitted 22 October, 2011; originally announced October 2011.

Comments: 11 pages, 5 figures

Journal ref: Phys. Rev. E 85, 026704 (2012) (final version)

Coupling lattice Boltzmann model for simulation of thermal flows on standard lattices

Authors: Q. Li, K. H. Luo, Y. L. He, Y. J. Gao, W. Q. Tao

Abstract: In this paper, a coupling lattice Boltzmann (LB) model for simulating thermal flows on the standard D2Q9 lattice is developed in the framework of the double-distribution-function (DDF) approach in which the viscous heat dissipation and compression work are considered. In the model, a density distribution function is used to simulate the flow field, while a total energy distribution function is emp… ▽ More In this paper, a coupling lattice Boltzmann (LB) model for simulating thermal flows on the standard D2Q9 lattice is developed in the framework of the double-distribution-function (DDF) approach in which the viscous heat dissipation and compression work are considered. In the model, a density distribution function is used to simulate the flow field, while a total energy distribution function is employed to simulate the temperature field. The discrete equilibrium density and total energy distribution functions are obtained from the Hermite expansions of the corresponding continuous equilibrium distribution functions. The pressure given by the equation of state of perfect gases is recovered in the macroscopic momentum and energy equations. The coupling between the momentum and energy transports makes the model applicable for general thermal flows such as non-Boussinesq flows, while the existing DDF LB models on standard lattices are usually limited to Boussinesq flows in which the temperature variation is small. Meanwhile, the simple structure and basic advantages of the DDF LB approach are retained. The model is tested by numerical simulations of thermal Couette flow, attenuation-driven acoustic streaming, and natural convection in a square cavity with small and large temperature differences. The numerical results are found to be in good agreement with the analytical solutions and/or other numerical results reported in the literature. △ Less

Submitted 29 September, 2011; originally announced September 2011.

Comments: 9 figures

Journal ref: Phys. Rev. E 85, 016710 (2012) (final version)

Enhanced lattice Bhatnagar-Gross-Krook method for fluid dynamics simulation

Authors: I. V. Karlin, D. Lycett-Brown, K. H. Luo

Abstract: A generalization of the lattice Bhatnagar-Gross-Krook (LBGK) model for the simulation of hydrodynamics is presented, which takes into account the difference and the frame-independence of the relaxation of non-hydrodynamic modes. The present model retains the computationally efficient standard LBGK form with the generalized equilibrium explicitly derived. The two-dimensional realization on the stan… ▽ More A generalization of the lattice Bhatnagar-Gross-Krook (LBGK) model for the simulation of hydrodynamics is presented, which takes into account the difference and the frame-independence of the relaxation of non-hydrodynamic modes. The present model retains the computationally efficient standard LBGK form with the generalized equilibrium explicitly derived. The two-dimensional realization on the standard lattice is discussed in detail. Performance of the model is assessed through a shear layer simulation and enhanced stability and accuracy with respect to the standard LBGK are reported. The results demonstrate that the present model is a useful upgrade of the standard LBGK without compromising its computational efficiency and accuracy. △ Less

Submitted 17 July, 2011; originally announced July 2011.

Comments: Submitted to Phys. Rev. E, 11-MAR-2011; revised