Showing 1–50 of 63 results for author: Lundeen, J S

Enhancing interferometry using weak value amplification with real weak values

Authors: **g-Hui Huang, Kyle M. Jordan, Adetunmise C. Dada, Xiang-Yun Hu, Jeff. S. Lundeen

Abstract: We introduce an ultra-sensitive interferometric protocol that combines weak value amplification (WVA) with traditional interferometry. This WVA+interferometry protocol uses weak value amplification of the relative delay between two paths to enhance the interferometric sensitivity, approaching the quantum limit for classical light. As an example, we demonstrate a proof-of-principle experiment that… ▽ More We introduce an ultra-sensitive interferometric protocol that combines weak value amplification (WVA) with traditional interferometry. This WVA+interferometry protocol uses weak value amplification of the relative delay between two paths to enhance the interferometric sensitivity, approaching the quantum limit for classical light. As an example, we demonstrate a proof-of-principle experiment that achieves few-attosecond timing resolution (few-nanometer path length resolution) with a double-slit interferometer using only common optical components. Since our example uses only the spatial shift of double-slit interference fringes, its precision is not limited by the timing resolution of the detectors, but is instead limited solely by the fundamental shot noise associated with classical light. We experimentally demonstrate that the signal-to-noise ratio can be improved by one to three orders of magnitude and approaches the shot-noise limit in the large amplification regime. Previously, quantum-limited WVA delay measurements were thought to require imaginary weak values, which necessitate light with a broad spectral bandwidth and high-resolution spectrometers. In contrast, our protocol highlights the feasibility of using real weak values and narrowband light. Thus, our protocol is a compelling and cost-effective approach to enhance interferometry. △ Less

Submitted 30 March, 2024; originally announced April 2024.

Comments: 3 figures

Properties and Applications of the Kirkwood-Dirac Distribution

Authors: David R. M. Arvidsson-Shukur, William F. Braasch Jr., Stephan De Bievre, Justin Dressel, Andrew N. Jordan, Christopher Langrenez, Matteo Lostaglio, Jeff S. Lundeen, Nicole Yunger Halpern

Abstract: The most famous quasi-probability distribution, the Wigner function, has played a pivotal role in the development of a continuous-variable quantum theory that has clear analogues of position and momentum. However, the Wigner function is ill-suited for much modern quantum-information research, which is focused on finite-dimensional systems and general observables. Instead, recent years have seen th… ▽ More The most famous quasi-probability distribution, the Wigner function, has played a pivotal role in the development of a continuous-variable quantum theory that has clear analogues of position and momentum. However, the Wigner function is ill-suited for much modern quantum-information research, which is focused on finite-dimensional systems and general observables. Instead, recent years have seen the Kirkwood-Dirac (KD) distribution come to the forefront as a powerful quasi-probability distribution for analysing quantum mechanics. The KD distribution allows tools from statistics and probability theory to be applied to problems in quantum-information processing. A notable difference to the Wigner function is that the KD distribution can represent a quantum state in terms of arbitrary observables. This paper reviews the KD distribution, in three parts. First, we present definitions and basic properties of the KD distribution and its generalisations. Second, we summarise the KD distribution's extensive usage in the study or development of measurement disturbance; quantum metrology; weak values; direct measurements of quantum states; quantum thermodynamics; quantum scrambling and out-of-time-ordered correlators; and the foundations of quantum mechanics, including Leggett-Garg inequalities, the consistent-histories interpretation, and contextuality. We emphasise connections between operational quantum advantages and negative or non-real KD quasi-probabilities. Third, we delve into the KD distribution's mathematical structure. We summarise the current knowledge regarding the geometry of KD-positive states (the states for which the KD distribution is a classical probability distribution), describe how to witness and quantify KD non-positivity, and outline relationships between KD non-positivity and observables' incompatibility. △ Less

Submitted 27 March, 2024; originally announced March 2024.

Comments: 37 pages, 13 figures

Experimental demonstration of the shadow of a laser beam

Authors: Raphael A Abrahao, Henri P N Morin, Jordan T R Page, Akbar Safari, Robert W Boyd, Jeff S Lundeen

Abstract: Light, being massless, casts no shadow; under ordinary circumstances, photons pass right through each other unimpeded. Here, we demonstrate a laser beam acting like an object - the beam casts a shadow upon a surface when the beam is illuminated by another light source. We observe a regular shadow in the sense it can be seen by the naked eye, it follows the contours of the surface it falls on, and… ▽ More Light, being massless, casts no shadow; under ordinary circumstances, photons pass right through each other unimpeded. Here, we demonstrate a laser beam acting like an object - the beam casts a shadow upon a surface when the beam is illuminated by another light source. We observe a regular shadow in the sense it can be seen by the naked eye, it follows the contours of the surface it falls on, and it follows the position and shape of the object (the laser beam). Specifically, we use a nonlinear optical process involving four atomic levels of ruby. We are able to control the intensity of a transmitted laser beam by applying another perpendicular laser beam. We experimentally measure the dependence of the contrast of the shadow on the power of the object laser beam, finding a maximum of approximately of approximately 22 percent, similar to that of a shadow of a tree on a sunny day. We provide a theoretical model that predicts the contrast of the shadow. Making light itself cast a shadow opens new possibilities for fabrication, imaging, and illumination. △ Less

Submitted 2 April, 2024; v1 submitted 12 March, 2024; originally announced March 2024.

3D-2D Neural Nets for Phase Retrieval in Noisy Interferometric Imaging

Authors: Andrew H. Proppe, Guillaume Thekkadath, Duncan England, Philip J. Bustard, Frédéric Bouchard, Jeff S. Lundeen, Benjamin J. Sussman

Abstract: In recent years, neural networks have been used to solve phase retrieval problems in imaging with superior accuracy and speed than traditional techniques, especially in the presence of noise. However, in the context of interferometric imaging, phase noise has been largely unaddressed by existing neural network architectures. Such noise arises naturally in an interferometer due to mechanical instab… ▽ More In recent years, neural networks have been used to solve phase retrieval problems in imaging with superior accuracy and speed than traditional techniques, especially in the presence of noise. However, in the context of interferometric imaging, phase noise has been largely unaddressed by existing neural network architectures. Such noise arises naturally in an interferometer due to mechanical instabilities or atmospheric turbulence, limiting measurement acquisition times and posing a challenge in scenarios with limited light intensity, such as remote sensing. Here, we introduce a 3D-2D Phase Retrieval U-Net (PRUNe) that takes noisy and randomly phase-shifted interferograms as inputs, and outputs a single 2D phase image. A 3D downsampling convolutional encoder captures correlations within and between frames to produce a 2D latent space, which is upsampled by a 2D decoder into a phase image. We test our model against a state-of-the-art singular value decomposition algorithm and find PRUNe reconstructions consistently show more accurate and smooth reconstructions, with a x2.5 - 4 lower mean squared error at multiple signal-to-noise ratios for interferograms with low (< 1 photon/pixel) and high (~100 photons/pixel) signal intensity. Our model presents a faster and more accurate approach to perform phase retrieval in extremely low light intensity interferometry in presence of phase noise, and will find application in other multi-frame noisy imaging techniques. △ Less

Submitted 8 February, 2024; originally announced February 2024.

A method to determine the M2 beam quality from the electric field in a single plane

Authors: M. H. Griessmann, A. C. Martinez-Becerril, J. S. Lundeen

Abstract: Laser beam quality is a key parameter for both industry and science. However, the most common measure, the M2 parameter, requires numerous intensity spatial-profiles for its determination. This is particularly inconvenient for modelling the impact of photonic devices on M2, such as metalenses and thin-film stacks, since models typically output a single electric field spatial-profile. Such a profil… ▽ More Laser beam quality is a key parameter for both industry and science. However, the most common measure, the M2 parameter, requires numerous intensity spatial-profiles for its determination. This is particularly inconvenient for modelling the impact of photonic devices on M2, such as metalenses and thin-film stacks, since models typically output a single electric field spatial-profile. Such a profile is also commonly determined in experiments from e.g., Shack-Hartmann sensors, shear plates, or off-axis holography. We introduce and test the validity and limitations of an explicit method to calculate M2 from a single electric field spatial-profile of the beam in any chosen transverse plane along the propagation direction. △ Less

Submitted 12 May, 2023; originally announced May 2023.

Journal ref: Opt. Continuum, 2, (2023) 1833-1848

Large-scale optical compression of free-space using an experimental three-lens spaceplate

Authors: Nicholas J. Sorensen, Michael T. Weil, Jeff S. Lundeen

Abstract: Recently introduced, spaceplates achieve the propagation of light for a distance greater than their thickness. In this way, they compress optical space, reducing the required distance between optical elements in an imaging system. Here we introduce a spaceplate based on conventional optics in a 4-$f$ arrangement, mimicking the transfer function of free-space in a thinner system - we term this devi… ▽ More Recently introduced, spaceplates achieve the propagation of light for a distance greater than their thickness. In this way, they compress optical space, reducing the required distance between optical elements in an imaging system. Here we introduce a spaceplate based on conventional optics in a 4-$f$ arrangement, mimicking the transfer function of free-space in a thinner system - we term this device a three-lens spaceplate. It is broadband, polarization-independent, and can be used for meter-scale space compression. We experimentally measure compression ratios up to 15.6, replacing up to 4.4 meters of free-space, three orders of magnitude greater than current optical spaceplates. We demonstrate that three-lens spaceplates reduce the length of a full-color imaging system, albeit with reductions in resolution and contrast. We present theoretical limits on the numerical aperture and the compression ratio. Our design presents a simple, accessible, cost-effective method for optically compressing large amounts of space. △ Less

Submitted 30 May, 2023; v1 submitted 8 February, 2023; originally announced February 2023.

Comments: 11 pages, 8 figures. Submitted to Optics Express Feb. 7, 2023, and accepted May 30, 2023

The Effect of Non-Gaussian Noise on Auto-correlative Weak-value Amplification

Authors: **g-Hui Huang, J. S. Lundeen, Adetunmise C. Dada, Kyle M. Jordan, Guang-Jun Wang, Xue-Ying Duan, Xiang-Yun Hu

Abstract: Accurate knowledge of the spectral features of noise and their influence on open quantum systems is fundamental for quantitative understanding and prediction of the dynamics in a realistic environment. For the weak measurements of two-level systems, the weak value obtained from experiments will inevitably be affected by the noise of the environment. Following our earlier work on the technique of t… ▽ More Accurate knowledge of the spectral features of noise and their influence on open quantum systems is fundamental for quantitative understanding and prediction of the dynamics in a realistic environment. For the weak measurements of two-level systems, the weak value obtained from experiments will inevitably be affected by the noise of the environment. Following our earlier work on the technique of the auto-correlative weak-value amplification (AWVA) approach under a Gaussian noise environment, here we study the effect of non-Gaussian noise on the AWVA technique.In particular, two types of noise with a negative-dB signal-to-noise ratio, frequency-stationary noises and frequency-nonstationary noises are studied. The various frequency-stationary noises, including low-frequency (1/f) noises, medium-frequency noises, and high-frequency noises, are generated in Simulink by translating the Gaussian white noise with different band-pass filters. While impulsive noise is studied as an example of frequency-non stationary noises. Our simulated results demonstrate that 1/f noises and impulsive noises have greater disturbance on the AWVA measurements. In addition, adding one kind of frequency-stationary noise, clam** the detected signals, and dominating the measurement range may {have} the potential to improve the precision of the AWVA technique with both a smaller deviation of the mean value and a smaller error bar in the presence of many hostile non-Gaussian noises. △ Less

Submitted 26 September, 2022; v1 submitted 26 September, 2022; originally announced September 2022.

Comments: 22 pages,8 figures

Quantum metrology timing limits of the Hong-Ou-Mandel interferometer and of general two-photon measurements

Authors: Kyle M. Jordan, Raphael A. Abrahao, Jeff S. Lundeen

Abstract: We examine the precision limits of Hong-Ou-Mandel (HOM) timing measurements, as well as precision limits applying to generalized two-photon measurements. As a special case, we consider the use of two-photon measurements using photons with variable bandwidths and frequency correlations. When the photon bandwidths are not equal, maximizing the measurement precision involves a trade-off between high… ▽ More We examine the precision limits of Hong-Ou-Mandel (HOM) timing measurements, as well as precision limits applying to generalized two-photon measurements. As a special case, we consider the use of two-photon measurements using photons with variable bandwidths and frequency correlations. When the photon bandwidths are not equal, maximizing the measurement precision involves a trade-off between high interference visibility and strong frequency anticorrelations, with the optimal precision occuring when the photons share non-maximal frequency anticorrelations. We show that a generalized measurement has precision limits that are qualitatively similar to those of the HOM measurement whenever the generalized measurement is insensitive to the net delay of both photons. By examining the performance of states with more general frequency distributions, our analysis allows for engineering of the joint spectral amplitude for use in realistic situations, in which both photons may not have ideal spectral properties. △ Less

Submitted 25 November, 2022; v1 submitted 22 June, 2022; originally announced June 2022.

Comments: 12 pages, 6 figures; resubmission

Journal ref: Phys. Rev. A 106, 063715 (2022)

Auto-correlative weak-value amplification under strong noise background

Authors: **g-Hui Huang, Xiang-Yun Hu, Adetunmise C. Dada, Jeff S. Lundeen, Kyle M. Jordan, Huan Chen, Jian-Qi An

Abstract: By choosing more orthogonality between pre-selection and post-selection states, one can significantly improve the sensitivity in the general optical quantum metrology based on the weak-value amplification (WVA) approach. However, increasing the orthogonality decreases the probability of detecting photons and makes the weak measurement difficult, especially when the weak measurement is disturbed by… ▽ More By choosing more orthogonality between pre-selection and post-selection states, one can significantly improve the sensitivity in the general optical quantum metrology based on the weak-value amplification (WVA) approach. However, increasing the orthogonality decreases the probability of detecting photons and makes the weak measurement difficult, especially when the weak measurement is disturbed by strong noise and the pointer is drowned in noise with a negative-dB signal-to-noise ratio (SNR). In this article, we investigate a modified weak measurement protocol with a temporal pointer, namely, the auto-correlative weak-value amplification (AWVA) approach. Specifically, a small longitudinal time delay (tiny phase shift) $τ$ of a Gaussian pulse is measured by implementing two simultaneous auto-correlative weak measurements under Gaussian white noise with different SNR. The small quantities $τ$ are obtained by measuring the auto-correlation coefficient of the pulses instead of fitting the shift of the mean value of the probe in the standard WVA technique. Simulation results show that the AWVA approach outperforms the standard WVA technique in the time domain with smaller statistical errors, remarkably increasing the precision of weak measurement under strong noise background. △ Less

Submitted 14 May, 2022; v1 submitted 29 March, 2022; originally announced March 2022.

Comments: 18 pages, 11 figures

To What Extent Can Space Be Compressed? Bandwidth Limits of Spaceplates

Authors: Kunal Shastri, Orad Reshef, Robert W. Boyd, Jeff S. Lundeen, Francesco Monticone

Abstract: Spaceplates are novel flat-optic devices that implement the optical response of a free-space volume over a smaller length, effectively "compressing space" for light propagation. Together with flat lenses such as metalenses or diffractive lenses, spaceplates have the potential to enable a drastic miniaturization of any free-space optical system. While the fundamental and practical bounds on the per… ▽ More Spaceplates are novel flat-optic devices that implement the optical response of a free-space volume over a smaller length, effectively "compressing space" for light propagation. Together with flat lenses such as metalenses or diffractive lenses, spaceplates have the potential to enable a drastic miniaturization of any free-space optical system. While the fundamental and practical bounds on the performance metrics of flat lenses have been well studied in recent years, a similar understanding of the ultimate limits of spaceplates is lacking, especially regarding the issue of bandwidth, which remains as a crucial roadblock for the adoption of this platform. In this work, we derive fundamental bounds on the bandwidth of spaceplates as a function of their numerical aperture and compression ratio (ratio by which the free-space pathway is compressed). The general form of these bounds is universal and can be applied and specialized for different broad classes of space-compression devices, regardless of their particular implementation. Our findings also offer relevant insights into the physical mechanism at the origin of generic space-compression effects, and may guide the design of higher performance spaceplates, opening new opportunities for ultra-compact, monolithic, planar optical systems for a variety of applications. △ Less

Submitted 9 February, 2022; v1 submitted 27 January, 2022; originally announced January 2022.

Comments: 12 pages, 4 figures

Designing high-performance propagation-compressing spaceplates using thin-film multilayer stacks

Authors: Jordan T. R. Page, Orad Reshef, Robert W. Boyd, Jeff S. Lundeen

Abstract: The development of metasurfaces has enabled unprecedented portability and functionality in flat optical devices. Spaceplates have recently been introduced as a complementary element to reduce the space between individual metalenses. This will further miniaturize entire imaging devices. However, a spaceplate necessitates a non-local optical response -- one which depends on the transverse spatial fr… ▽ More The development of metasurfaces has enabled unprecedented portability and functionality in flat optical devices. Spaceplates have recently been introduced as a complementary element to reduce the space between individual metalenses. This will further miniaturize entire imaging devices. However, a spaceplate necessitates a non-local optical response -- one which depends on the transverse spatial frequency component of a light field -- therefore making it challenging both to design them and to assess their ultimate performance and potential. Here, we employ inverse-design techniques to explore the behaviour of general thin-film-based spaceplates. We observe a tradeoff between the compression factor R and the numerical aperture NA of such devices; we obtained a compression factor of R = 5.5 for devices with an NA = 0.42 up to a record R = 340 with NA of 0.017. Our work illustrates that even simple designs consisting of realistic materials (i.e., silicon and glass) permit capable spaceplates for monochromatic applications. △ Less

Submitted 22 June, 2021; originally announced June 2021.

Comments: 8 pages, 4 figures

Theory and experiment for resource-efficient joint weak-measurement

Authors: Aldo C. Martinez-Becerril, Gabriel Bussières, Davor Curic, Lambert Giner, Raphael A. Abrahao, Jeff S. Lundeen

Abstract: Incompatible observables underlie pillars of quantum physics such as contextuality and entanglement. The Heisenberg uncertainty principle is a fundamental limitation on the measurement of the product of incompatible observables, a `joint' measurement. However, recently a method using weak measurement has experimentally demonstrated joint measurement. This method [Lundeen, J. S., and Bamber, C. Phy… ▽ More Incompatible observables underlie pillars of quantum physics such as contextuality and entanglement. The Heisenberg uncertainty principle is a fundamental limitation on the measurement of the product of incompatible observables, a `joint' measurement. However, recently a method using weak measurement has experimentally demonstrated joint measurement. This method [Lundeen, J. S., and Bamber, C. Phys. Rev. Lett. 108, 070402, 2012] delivers the standard expectation value of the product of observables, even if they are incompatible. A drawback of this method is that it requires coupling each observable to a distinct degree of freedom (DOF), i.e., a disjoint Hilbert space. Typically, this `read-out' system is an unused internal DOF of the measured particle. Unfortunately, one quickly runs out of internal DOFs, which limits the number of observables and types of measurements one can make. To address this limitation, we propose and experimentally demonstrate a technique to perform a joint weak-measurement of two incompatible observables using only one DOF as a read-out system. We apply our scheme to directly measure the density matrix of photon polarization states. △ Less

Submitted 26 November, 2021; v1 submitted 30 March, 2021; originally announced March 2021.

Comments: 17 pages, 5 figures

Journal ref: Quantum 5, 599 (2021)

Approaching quantum-limited metrology with imperfect detectors by using weak-value amplification

Authors: Liang Xu, Zexuan Liu, Animesh Datta, George C. Knee, Jeff S. Lundeen, Yan-qing Lu, Lijian Zhang

Abstract: Weak value amplification (WVA) is a metrological protocol that amplifies ultra-small physical effects. However, the amplified outcomes necessarily occur with highly suppressed probabilities, leading to the extensive debate on whether the overall measurement precision is improved in comparison to that of conventional measurement (CM). Here, we experimentally demonstrate the unambiguous advantages o… ▽ More Weak value amplification (WVA) is a metrological protocol that amplifies ultra-small physical effects. However, the amplified outcomes necessarily occur with highly suppressed probabilities, leading to the extensive debate on whether the overall measurement precision is improved in comparison to that of conventional measurement (CM). Here, we experimentally demonstrate the unambiguous advantages of WVA that overcome practical limitations including noise and saturation of photo-detection and maintain a shot-noise-scaling precision for a large range of input light intensity well beyond the dynamic range of the photodetector. The precision achieved by WVA is six times higher than that of CM in our setup. Our results clear the way for the widespread use of WVA in applications involving the measurement of small signals including precision metrology and commercial sensors. △ Less

Submitted 7 May, 2020; originally announced May 2020.

Comments: 6pages, 4 figures

Journal ref: Phys. Rev. Lett. 125, 080501 (2020)

Pump depletion in parametric down-conversion with low pump energies

Authors: Jefferson Flórez, Jeff S. Lundeen, Maria V. Chekhova

Abstract: We report the efficient generation of high-gain parametric down-conversion, including pump depletion, with pump powers as low as 100 $μ$W (energies $0.1$~$μ$J/pulse) and conversion efficiencies up to 33\%. In our simple configuration, the pump beam is tightly focused into a bulk periodically poled lithium niobate crystal placed in free space. We also observe a change in the photon number statistic… ▽ More We report the efficient generation of high-gain parametric down-conversion, including pump depletion, with pump powers as low as 100 $μ$W (energies $0.1$~$μ$J/pulse) and conversion efficiencies up to 33\%. In our simple configuration, the pump beam is tightly focused into a bulk periodically poled lithium niobate crystal placed in free space. We also observe a change in the photon number statistics for both the pump and down-converted beams as the pump power increases to reach the depleted pump regime. The experimental results are a clear signature of the interplay between the pump and the down-converted beams in highly efficient parametric down-conversion sources. △ Less

Submitted 20 April, 2020; v1 submitted 16 March, 2020; originally announced March 2020.

Comments: 5 pages, 4 figures

An optic to replace space and its application towards ultra-thin imaging systems

Authors: Orad Reshef, Michael P. DelMastro, Katherine K. M. Bearne, Ali H. Alhulaymi, Lambert Giner, Robert W. Boyd, Jeff S. Lundeen

Abstract: Centuries of effort to improve imaging has focused on perfecting and combining lenses to obtain better optical performance and new functionalities. The arrival of nanotechnology has brought to this effort engineered surfaces called metalenses, which promise to make imaging devices more compact. However, unaddressed by this promise is the space between the lenses, which is crucial for image formati… ▽ More Centuries of effort to improve imaging has focused on perfecting and combining lenses to obtain better optical performance and new functionalities. The arrival of nanotechnology has brought to this effort engineered surfaces called metalenses, which promise to make imaging devices more compact. However, unaddressed by this promise is the space between the lenses, which is crucial for image formation but takes up by far the most room in imaging systems. Here, we address this issue by presenting the concept of and experimentally demonstrating an optical 'spaceplate', an optic that effectively propagates light for a distance that can be considerably longer than the plate thickness. Such an optic would shrink future imaging systems, opening the possibility for ultra-thin monolithic cameras. More broadly, a spaceplate can be applied to miniaturize important devices that implicitly manipulate the spatial profile of light, for example, solar concentrators, collimators for light sources, integrated optical components, and spectrometers. △ Less

Submitted 11 June, 2021; v1 submitted 17 February, 2020; originally announced February 2020.

Comments: 4 figures, 3 videos, includes complete SI

Journal ref: Nat Commun 12, 3512 (2021)

Theory of Four-Wave Mixing of Cylindrical Vector Beams in Optical Fibers

Authors: E. Scott Goudreau, Connor Kupchak, Benjamin J. Sussman, Robert W. Boyd, Jeff S. Lundeen

Abstract: Cylindrical vector (CV) beams are a set of transverse spatial modes that exhibit a cylindrically symmetric intensity profile and a variable polarization about the beam axis. They are composed of a non-separable superposition of orbital and spin angular momentum. Critically, CV beams are also the eigenmodes of optical fiber and, as such, are of wide-spread practical importance in photonics and have… ▽ More Cylindrical vector (CV) beams are a set of transverse spatial modes that exhibit a cylindrically symmetric intensity profile and a variable polarization about the beam axis. They are composed of a non-separable superposition of orbital and spin angular momentum. Critically, CV beams are also the eigenmodes of optical fiber and, as such, are of wide-spread practical importance in photonics and have the potential to increase communications bandwidth through spatial multiplexing. Here, we derive the coupled amplitude equations that describe the four-wave mixing (FWM) of CV beams in optical fibers. These equations allow us to determine the selection rules that govern the interconversion of CV modes in FWM processes. With these selection rules, we show that FWM conserves the total angular momentum, the sum of orbital and spin angular momentum, in the conversion of two input photons to two output photons. When applied to spontaneous four-wave mixing, the selection rules show that photon pairs can be generated in CV modes directly and can be entangled in those modes. Such quantum states of light in CV modes could benefit technologies such as quantum key distribution with satellites. △ Less

Submitted 20 December, 2019; originally announced December 2019.

Arbitrary optical wave evolution with Fourier transforms and phase masks

Authors: Víctor J. López-Pastor, Jeff S. Lundeen, Florian Marquardt

Abstract: A large number of applications in classical and quantum photonics require the capability of implementing arbitrary linear unitary transformations on a set of optical modes. In a seminal work by Reck et al. it was shown how to build such multiport universal interferometers with a mesh of beam splitters and phase shifters, and this design became the basis for most experimental implementations in the… ▽ More A large number of applications in classical and quantum photonics require the capability of implementing arbitrary linear unitary transformations on a set of optical modes. In a seminal work by Reck et al. it was shown how to build such multiport universal interferometers with a mesh of beam splitters and phase shifters, and this design became the basis for most experimental implementations in the last decades. However, the design of Reck et al. is difficult to scale up to a large number of modes, which would be required for many applications. Here we present a constructive proof that it is possible to realize a multiport universal interferometer on N modes with a succession of 6N Fourier transforms and 6N+1 phase masks, for any even integer N. Furthermore, we provide an algorithm to find the correct succesion of Fourier transforms and phase masks to realize a given arbitrary unitary transformation. Since Fourier transforms and phase masks are routinely implemented in several optical setups and they do not suffer from the scalability issues associated with building extensive meshes of beam splitters, we believe that our design can be useful for many applications in photonics. △ Less

Submitted 10 December, 2019; originally announced December 2019.

Comments: 7 pages, 3 figures

High-dimension experimental tomography of a path-encoded photon quantum-state

Authors: Davor Curic, Lambert Giner, Jeff S. Lundeen

Abstract: Quantum information protocols often rely on tomographic techniques to determine the state of the system. A popular method of encoding information is on the different paths a photon may take, for example, parallel waveguides in integrated optics. However, reconstruction of states encoded onto a large number of paths is often prohibitively resource intensive and requires complicated experimental set… ▽ More Quantum information protocols often rely on tomographic techniques to determine the state of the system. A popular method of encoding information is on the different paths a photon may take, for example, parallel waveguides in integrated optics. However, reconstruction of states encoded onto a large number of paths is often prohibitively resource intensive and requires complicated experimental setups. Addressing this, we present a simple method for determining the state of a photon in a superposition of d paths using a rotating one-dimensional optical Fourier Transform. We establish the theory and experimentally demonstrate the technique by measuring a wide variety of six-dimensional density matrices. The average fidelity of these with the expected state is as high as 0.9852 +/- 0.0008. This performance is comparable or exceeds established tomographic methods for other types of systems. △ Less

Submitted 10 June, 2019; originally announced June 2019.

Comments: 20 pages, 5 figures

Journal ref: J. Photonics Research, 2019, 7(7):07000A27

Experimental simultaneous read out of the real and imaginary parts of the weak value

Authors: A. Hariri, D. Curic, L. Giner, J. S. Lundeen

Abstract: The weak value, the average result of a weak measurement, has proven useful for probing quantum and classical systems. Examples include the amplification of small signals, investigating quantum paradoxes, and elucidating fundamental quantum phenomena such as geometric phase. A key characteristic of the weak value is that it can be complex, in contrast to a standard expectation value. However, typi… ▽ More The weak value, the average result of a weak measurement, has proven useful for probing quantum and classical systems. Examples include the amplification of small signals, investigating quantum paradoxes, and elucidating fundamental quantum phenomena such as geometric phase. A key characteristic of the weak value is that it can be complex, in contrast to a standard expectation value. However, typically only either the real or imaginary component of the weak value is determined in a given experimental setup. Weak measurements can be used to, in a sense, simultaneously measure non-commuting observables. This principle was used in the direct measurement of the quantum wavefunction. However, the wavefunction's real and imaginary components, given by a weak value, are determined in different setups or on separate ensembles of systems, putting the procedure's directness in question. To address these issues, we introduce and experimentally demonstrate a general method to simultaneously read out both components of the weak value in a single experimental apparatus. In particular, we directly measure the polarization state of an ensemble of photons using weak measurement. With our method, each photon contributes to both the real and imaginary parts of the weak-value average. On a fundamental level, this suggests that the full complex weak value is a characteristic of each photon measured. △ Less

Submitted 5 June, 2019; originally announced June 2019.

Journal ref: Phys. Rev. A 100, 032119 (2019)

Determining complementary properties using weak-measurement: uncertainty, predictability, and disturbance

Authors: G. S. Thekkadath, F. Hufnagel, J. S. Lundeen

Abstract: It is often said that measuring a system's position must disturb the complementary property, momentum, by some minimum amount due to the Heisenberg uncertainty principle. Using a "weak-measurement", this disturbance can be reduced. One might expect this comes at the cost of also reducing the measurement's precision. However, it was recently demonstrated that a sequence consisting of a weak positio… ▽ More It is often said that measuring a system's position must disturb the complementary property, momentum, by some minimum amount due to the Heisenberg uncertainty principle. Using a "weak-measurement", this disturbance can be reduced. One might expect this comes at the cost of also reducing the measurement's precision. However, it was recently demonstrated that a sequence consisting of a weak position measurement followed by a regular momentum measurement can probe a quantum system at a single point, with zero width, in position-momentum space. Here, we study this "joint weak-measurement" and reconcile its compatibility with the uncertainty principle. While a single trial probes the system with a resolution that can saturate Heisenberg's limit, we show that averaging over many trials can be used to surpass this limit. The weak-measurement does not trade-away precision, but rather another type of uncertainty called "predictability" which quantifies the certainty of retrodicting the measurement's outcome. △ Less

Submitted 23 November, 2018; v1 submitted 16 September, 2018; originally announced September 2018.

Comments: 10 pages, 2 figures

Journal ref: New J. Phys. 20, 113034 (2018)

The phase sensitivity of a fully quantum three-mode nonlinear interferometer

Authors: Jefferson Flórez, Enno Giese, Davor Curic, Lambert Giner, Robert W. Boyd, Jeff S. Lundeen

Abstract: We study a nonlinear interferometer consisting of two consecutive parametric amplifiers, where all three optical fields (pump, signal and idler) are treated quantum mechanically, allowing for pump depletion and other quantum phenomena. The interaction of all three fields in the final amplifier leads to an interference pattern from which we extract the phase uncertainty. We find that the phase unce… ▽ More We study a nonlinear interferometer consisting of two consecutive parametric amplifiers, where all three optical fields (pump, signal and idler) are treated quantum mechanically, allowing for pump depletion and other quantum phenomena. The interaction of all three fields in the final amplifier leads to an interference pattern from which we extract the phase uncertainty. We find that the phase uncertainty oscillates around a saturation level that decreases as the mean number $N$ of input pump photons increases. For optimal interaction strengths, we also find a phase uncertainty below the shot-noise level and obtain a Heisenberg scaling $1/N$. This is in contrast to the conventional treatment within the parametric approximation, where the Heisenberg scaling is observed as a function of the number of down-converted photons inside the interferometer. △ Less

Submitted 18 August, 2018; originally announced August 2018.

Comments: 8 pages, 7 figures

Journal ref: New Journal of Physics, Volume 20, Number 12, Page 123022, 2018

Projecting onto any two-photon polarization state using linear optics

Authors: G. S. Thekkadath, L. Giner, X. Ma, J. Flórez, J. S. Lundeen

Abstract: Projectors are a simple but powerful tool for manipulating and probing quantum systems. For instance, projecting two-qubit systems onto maximally entangled states can enable quantum teleportation. While such projectors have been extensively studied, partially-entangling measurements have been largely overlooked, especially experimentally, despite their important role in quantum foundations and qua… ▽ More Projectors are a simple but powerful tool for manipulating and probing quantum systems. For instance, projecting two-qubit systems onto maximally entangled states can enable quantum teleportation. While such projectors have been extensively studied, partially-entangling measurements have been largely overlooked, especially experimentally, despite their important role in quantum foundations and quantum information. Here, we propose a way to project two polarized photons onto any state with a single experimental setup. Our scheme does not require optical non-linearities or additional photons. Instead, the entangling operation is provided by Hong-Ou-Mandel interference and post-selection. The efficiency of the scheme is between 50% and 100%, depending on the projector. We perform an experimental demonstration and reconstruct the operator describing our measurement using detector tomography. Finally, we flip the usual role of measurement and state in Hardy's test by performing a partially-entangling projector on separable states. The results verify the entangling nature of our measurement with six standard deviations of confidence. △ Less

Submitted 21 August, 2018; v1 submitted 9 May, 2018; originally announced May 2018.

Comments: 8 pages, 4 figures

Journal ref: New J. Phys. 20, 083033 (2018)

Implementation of nearly arbitrary spatially-varying polarization transformations: a non-diffractive and non-interferometric approach using spatial light modulators

Authors: M. T. Runyon, C. H. Nacke, A. Sit, M. Granados-Baez, L. Giner, J. S. Lundeen

Abstract: A fast and automated scheme for general polarization transformations holds great value in adaptive optics, quantum information, and virtually all applications involving light-matter and light-light interactions. We present an experiment that uses a liquid crystal on silicon spatial light modulator (LCOS-SLM) to perform polarization transformations on a light field. We experimentally demonstrate th… ▽ More A fast and automated scheme for general polarization transformations holds great value in adaptive optics, quantum information, and virtually all applications involving light-matter and light-light interactions. We present an experiment that uses a liquid crystal on silicon spatial light modulator (LCOS-SLM) to perform polarization transformations on a light field. We experimentally demonstrate the point-by-point conversion of uniformly polarized light fields across the wave front to realize arbitrary, spatially varying polarization states. Additionally, we demonstrate that a light field with an arbitrary spatially varying polarization can be transformed to a spatially invariant (i.e., uniform) polarization. △ Less

Submitted 15 February, 2018; originally announced February 2018.

Comments: 16 pages, 10 figures

An experimental investigation of measurement-induced disturbance and time symmetry in quantum physics

Authors: Davor Curic, Magdalena C. Richardson, Guillaume S. Thekkadath, Jefferson Flórez, Lambert Giner, Jeff S. Lundeen

Abstract: Unlike regular time evolution governed by the Schrödinger equation, standard quantum measurement appears to violate time-reversal symmetry. Measurement creates random disturbances (e.g., collapse) that prevents back-tracing the quantum state of the system. The effect of these disturbances is explicit in the results of subsequent measurements. In this way, the joint result of sequences of measureme… ▽ More Unlike regular time evolution governed by the Schrödinger equation, standard quantum measurement appears to violate time-reversal symmetry. Measurement creates random disturbances (e.g., collapse) that prevents back-tracing the quantum state of the system. The effect of these disturbances is explicit in the results of subsequent measurements. In this way, the joint result of sequences of measurements depends on the order in time in which those measurements are performed. One might expect that if the disturbance could be eliminated this time-ordering dependence would vanish. Following a recent theoretical proposal [A. Bednorz et al 2013 New J. Phys. 15 023043], we experimentally investigate this dependence for a kind of measurement that creates an arbitrarily small disturbance, weak measurement. We perform various sequences of a set of polarization weak measurements on photons. We experimentally demonstrate that, although the weak measurements are minimally disturbing, their time-ordering affects the outcome of the measurement sequence for quantum systems. △ Less

Submitted 12 January, 2018; originally announced January 2018.

Comments: 11 pages, 3 figures

Journal ref: Phys. Rev. A 97, 042128 (2018)

A variable partially-polarizing beam splitter

Authors: Jefferson Flórez, Nathan J. Carlson, Codey H. Nacke, Lambert Giner, Jeff S. Lundeen

Abstract: We present designs for variably polarizing beam splitters. These are beam splitters allowing the complete and independent control of the horizontal and vertical polarization splitting ratios. They have quantum optics and quantum information applications, such as quantum logic gates for quantum computing and non-local measurements for quantum state estimation. At the heart of each design is an inte… ▽ More We present designs for variably polarizing beam splitters. These are beam splitters allowing the complete and independent control of the horizontal and vertical polarization splitting ratios. They have quantum optics and quantum information applications, such as quantum logic gates for quantum computing and non-local measurements for quantum state estimation. At the heart of each design is an interferometer. We experimentally demonstrate one particular implementation, a displaced Sagnac interferometer configuration, that provides an inherent instability to air currents and vibrations. Furthermore, this design does not require any custom-made optics but only common components which can be easily found in an optics laboratory. △ Less

Submitted 27 February, 2018; v1 submitted 12 September, 2017; originally announced September 2017.

Comments: 9 pages, 8 figures

Journal ref: Review of Scientific Instruments 89 (2), 023108 (2018)

General Lossless Spatial Polarization Transformations

Authors: Alicia Sit, Lambert Giner, Ebrahim Karimi, Jeff S. Lundeen

Abstract: Liquid crystals allow for the real-time control of the polarization of light. We describe and provide some experimental examples of the types of general polarization transformations, including universal polarization transformations, that can be accomplished with liquid crystals in tandem with fixed waveplates. Implementing these transformations with an array of liquid crystals, e.g., a spatial lig… ▽ More Liquid crystals allow for the real-time control of the polarization of light. We describe and provide some experimental examples of the types of general polarization transformations, including universal polarization transformations, that can be accomplished with liquid crystals in tandem with fixed waveplates. Implementing these transformations with an array of liquid crystals, e.g., a spatial light modulator, allows for the manipulation of the polarization across a beam's transverse plane. We outline applications of such general spatial polarization transformations in the generation of exotic types of vector polarized beams, a polarization magnifier, and the correction of polarization aberrations in light fields. △ Less

Submitted 17 March, 2017; v1 submitted 20 February, 2017; originally announced February 2017.

Comments: 21 pages, 8 figures

Journal ref: Journal of Optics 19 (2017) 094003

Determining complementary properties with quantum clones

Authors: G. S. Thekkadath, R. Y. Saaltink, L. Giner, J. S. Lundeen

Abstract: In a classical world, simultaneous measurements of complementary properties (e.g. position and momentum) give a system's state. In quantum mechanics, measurement-induced disturbance is largest for complementary properties and, hence, limits the precision with which such properties can be determined simultaneously. It is tempting to try to sidestep this disturbance by copying the system and measuri… ▽ More In a classical world, simultaneous measurements of complementary properties (e.g. position and momentum) give a system's state. In quantum mechanics, measurement-induced disturbance is largest for complementary properties and, hence, limits the precision with which such properties can be determined simultaneously. It is tempting to try to sidestep this disturbance by copying the system and measuring each complementary property on a separate copy. However, perfect copying is physically impossible in quantum mechanics. Here, we investigate using the closest quantum analog to this copying strategy, optimal cloning. The coherent portion of the generated clones' state corresponds to "twins" of the input system. Like perfect copies, both twins faithfully reproduce the properties of the input system. Unlike perfect copies, the twins are entangled. As such, a measurement on both twins is equivalent to a simultaneous measurement on the input system. For complementary observables, this joint measurement gives the system's state, just as in the classical case. We demonstrate this experimentally using polarized single photons. △ Less

Submitted 17 July, 2017; v1 submitted 15 January, 2017; originally announced January 2017.

Comments: 5+4 pages, 3+5 figures (includes SM)

Journal ref: Phys. Rev. Lett. 119, 050405 (2017)

Weak Value Amplification Can Outperform Conventional Measurement in the Presence of Detector Saturation

Authors: Jérémie Harris, Robert W. Boyd, Jeff S. Lundeen

Abstract: Weak value amplification (WVA) is a technique in which one can magnify the apparent strength of a measurement signal. Some have claimed that WVA can outperform more conventional measurement schemes in parameter estimation. Nonetheless, a significant body of theoretical work has challenged this perspective, suggesting WVA to be fundamentally sub-optimal. Optimal measurements may not be practical, h… ▽ More Weak value amplification (WVA) is a technique in which one can magnify the apparent strength of a measurement signal. Some have claimed that WVA can outperform more conventional measurement schemes in parameter estimation. Nonetheless, a significant body of theoretical work has challenged this perspective, suggesting WVA to be fundamentally sub-optimal. Optimal measurements may not be practical, however. Two practical considerations that have been conjectured to afford a benefit to WVA over conventional measurement are certain types of noise and detector saturation. Here, we report a theoretical study of the role of saturation and pixel noise in WVA-based measurement, in which we carry out a Bayesian analysis of the Fisher information available using a saturable, pixelated, digitized, and/or noisy detector. We draw two conclusions: first, that saturation alone does not confer an advantage to the WVA approach over conventional measurement, and second, that WVA can outperform conventional measurement when saturation is combined with intrinsic pixel noise and/or digitization. △ Less

Submitted 13 December, 2016; originally announced December 2016.

Comments: 5 pages, 3 figures

Journal ref: Phys. Rev. Lett. 118, 070802 (2017)

Super-critical phasematching for photon pair generation in structured light modes

Authors: Rebecca Y. Saaltink, Lambert Giner, Robert W. Boyd, Ebrahim Karimi, Jeff S. Lundeen

Abstract: We propose a method for directly producing radially and azimuthally polarized photon pairs through spontaneous parametric downconversion (SPDC). This method constitutes a novel geometry for SPDC, in which a radially polarized Bessel-Gauss pump beam is directed into a nonlinear crystal, with the central propagation direction parallel to the crystal axis. The phasematching conditions are controlled… ▽ More We propose a method for directly producing radially and azimuthally polarized photon pairs through spontaneous parametric downconversion (SPDC). This method constitutes a novel geometry for SPDC, in which a radially polarized Bessel-Gauss pump beam is directed into a nonlinear crystal, with the central propagation direction parallel to the crystal axis. The phasematching conditions are controlled by changing the opening angle of the pump beam; as the crystal axis cannot be tuned, we refer to this process as super-critical phasematching. We model and plot the spatial and polarization output distributions for Type-I and Type-II super-critical phasematching. △ Less

Submitted 5 October, 2016; originally announced October 2016.

Comments: 14 pages, 8 figures

Journal ref: Optics Express, Vol. 24, Issue 21, pp. 24495-24508 (2016)

Direct measurement of the density matrix of a quantum system

Authors: G. S. Thekkadath, L. Giner, Y. Chalich, M. J. Horton, J. Banker, J. S. Lundeen

Abstract: One drawback of conventional quantum state tomography is that it does not readily provide access to single density matrix elements, since it requires a global reconstruction. Here we experimentally demonstrate a scheme that can be used to directly measure individual density matrix elements of general quantum states. The scheme relies on measuring a sequence of three observables, each complementary… ▽ More One drawback of conventional quantum state tomography is that it does not readily provide access to single density matrix elements, since it requires a global reconstruction. Here we experimentally demonstrate a scheme that can be used to directly measure individual density matrix elements of general quantum states. The scheme relies on measuring a sequence of three observables, each complementary to the last. The first two measurements are made weak to minimize the disturbance they cause to the state, while the final measurement is strong. We perform this joint measurement on polarized photons in pure and mixed states to directly measure their density matrix. The weak measurements are achieved using two walk-off crystals, each inducing a polarization-dependent spatial shift that couples the spatial and polarization degree of freedom of the photons. This direct measurement method provides an operational meaning to the density matrix and promises to be especially useful for large dimensional states. △ Less

Submitted 12 September, 2016; v1 submitted 26 April, 2016; originally announced April 2016.

Comments: 5 pages, 3 figures. Updated and includes SM (6 pages, 2 figures)

Journal ref: Phys. Rev. Lett. 117, 120401 (2016)

Observing Dirac's classical phase space analog to the quantum state

Authors: Jeff S. Lundeen, Charles Bamber

Abstract: In 1945, Dirac attempted to develop a "formal probability" distribution to describe quantum operators in terms of two non-commuting variables, such as position x and momentum p [Rev. Mod. Phys. 17, 195 (1945)]. The resulting quasi-probability distribution is a complete representation of the quantum state and can be observed directly in experiments. We measure Dirac's distribution for the quantum s… ▽ More In 1945, Dirac attempted to develop a "formal probability" distribution to describe quantum operators in terms of two non-commuting variables, such as position x and momentum p [Rev. Mod. Phys. 17, 195 (1945)]. The resulting quasi-probability distribution is a complete representation of the quantum state and can be observed directly in experiments. We measure Dirac's distribution for the quantum state of the transverse degree of freedom of a photon by weakly measuring transverse x so as to not randomize the subsequent p measurement. Further, we show that the distribution has the classical-like feature that it transforms (e.g., propagates) according to Bayes' law. △ Less

Submitted 29 November, 2013; v1 submitted 5 September, 2013; originally announced September 2013.

Comments: 9 pages, 4 figures, Supplementary Material

Journal ref: Physical Review Letters, 112, 070405 (2014)

Map** coherence in measurement via full quantum tomography of a hybrid optical detector

Authors: Lijian Zhang, Hendrik Coldenstrodt-Ronge, Animesh Datta, Graciana Puentes, Jeff S. Lundeen, Xian-Min **, Brian J. Smith, Martin B. Plenio, Ian A. Walmsley

Abstract: Quantum states and measurements exhibit wave-like --- continuous, or particle-like --- discrete, character. Hybrid discrete-continuous photonic systems are key to investigating fundamental quantum phenomena, generating superpositions of macroscopic states, and form essential resources for quantum-enhanced applications, e.g. entanglement distillation and quantum computation, as well as highly effic… ▽ More Quantum states and measurements exhibit wave-like --- continuous, or particle-like --- discrete, character. Hybrid discrete-continuous photonic systems are key to investigating fundamental quantum phenomena, generating superpositions of macroscopic states, and form essential resources for quantum-enhanced applications, e.g. entanglement distillation and quantum computation, as well as highly efficient optical telecommunications. Realizing the full potential of these hybrid systems requires quantum-optical measurements sensitive to complementary observables such as field quadrature amplitude and photon number. However, a thorough understanding of the practical performance of an optical detector interpolating between these two regions is absent. Here, we report the implementation of full quantum detector tomography, enabling the characterization of the simultaneous wave and photon-number sensitivities of quantum-optical detectors. This yields the largest parametrization to-date in quantum tomography experiments, requiring the development of novel theoretical tools. Our results reveal the role of coherence in quantum measurements and demonstrate the tunability of hybrid quantum-optical detectors. △ Less

Submitted 9 April, 2012; originally announced April 2012.

Comments: 7 pages, 3 figures

Journal ref: Nature Photonics 6, 364-368 (2012)

Direct measurement of general quantum states using weak measurement

Authors: Jeff S. Lundeen, Charles Bamber

Abstract: Recent work [J.S. Lundeen et al. Nature, 474, 188 (2011)] directly measured the wavefunction by weakly measuring a variable followed by a normal (i.e. `strong') measurement of the complementary variable. We generalize this method to mixed states by considering the weak measurement of various products of these observables, thereby providing the density matrix an operational definition in terms of a… ▽ More Recent work [J.S. Lundeen et al. Nature, 474, 188 (2011)] directly measured the wavefunction by weakly measuring a variable followed by a normal (i.e. `strong') measurement of the complementary variable. We generalize this method to mixed states by considering the weak measurement of various products of these observables, thereby providing the density matrix an operational definition in terms of a procedure for its direct measurement. The method only requires measurements in two bases and can be performed `in situ', determining the quantum state without destroying it. △ Less

Submitted 22 December, 2011; originally announced December 2011.

Comments: This is a later and very different version of arXiv:1110.0727v3 [quant-ph]. New content: a method to directly measure each element of the density matrix, specific Hamiltonians to weakly measure the product of non-commuting observables, and references to recent related work

Journal ref: Phys. Rev. Lett. 108, 070402 (2012)

Direct Measurement of the Quantum Wavefunction

Authors: Jeff S. Lundeen, Brandon Sutherland, Aabid Patel, Corey Stewart, Charles Bamber

Abstract: Central to quantum theory, the wavefunction is the complex distribution used to completely describe a quantum system. Despite its fundamental role, it is typically introduced as an abstract element of the theory with no explicit definition. Rather, physicists come to a working understanding of the wavefunction through its use to calculate measurement outcome probabilities via the Born Rule. Presen… ▽ More Central to quantum theory, the wavefunction is the complex distribution used to completely describe a quantum system. Despite its fundamental role, it is typically introduced as an abstract element of the theory with no explicit definition. Rather, physicists come to a working understanding of the wavefunction through its use to calculate measurement outcome probabilities via the Born Rule. Presently, scientists determine the wavefunction through tomographic methods, which estimate the wavefunction that is most consistent with a diverse collection of measurements. The indirectness of these methods compounds the problem of defining the wavefunction. Here we show that the wavefunction can be measured directly by the sequential measurement of two complementary variables of the system. The crux of our method is that the first measurement is performed in a gentle way (i.e. weak measurement) so as not to invalidate the second. The result is that the real and imaginary components of the wavefunction appear directly on our measurement apparatus. We give an experimental example by directly measuring the transverse spatial wavefunction of a single photon, a task not previously realized by any method. We show that the concept is universal, being applicable both to other degrees of freedom of the photon (e.g. polarization, frequency, etc.) and to other quantum systems (e.g. electron spin-z quantum state, SQUIDs, trapped ions, etc.). Consequently, this method gives the wavefunction a straightforward and general definition in terms of a specific set of experimental operations. We expect it to expand the range of quantum systems scientists are able to characterize and initiate new avenues to understand fundamental quantum theory. △ Less

Submitted 15 December, 2011; originally announced December 2011.

Journal ref: Nature, 474, 188 (2011)

Weak measurement of the Dirac distribution

Authors: Jeff S. Lundeen, Charles Bamber

Abstract: Recent work [J.S. Lundeen et al. Nature, 474, 188 (2011)] directly measured the wavefunction by weakly measuring a variable followed by a normal (i.e. `strong') measurement of the complementary variable. We generalize this method to mixed states by considering the weak measurement of the product of the two observables, which, as a non-Hermitian operator, is normally unobservable. This generalized… ▽ More Recent work [J.S. Lundeen et al. Nature, 474, 188 (2011)] directly measured the wavefunction by weakly measuring a variable followed by a normal (i.e. `strong') measurement of the complementary variable. We generalize this method to mixed states by considering the weak measurement of the product of the two observables, which, as a non-Hermitian operator, is normally unobservable. This generalized method provides mixed states an operational definition related to the operator representation proposed by Dirac. Uniquely, it can be performed `in situ', determing the quantum state without destroying it. △ Less

Submitted 22 December, 2011; v1 submitted 4 October, 2011; originally announced October 2011.

Comments: Reverted to older longer version, added references to recent work

Nonlinearity in Single Photon Detection: Modeling and Quantum Tomography

Authors: Mohsen K. Akhlaghi, A. Hamed Majedi, Jeff S. Lundeen

Abstract: Single Photon Detectors are integral to quantum optics and quantum information. Superconducting Nanowire based detectors exhibit new levels of performance, but have no accepted quantum optical model that is valid for multiple input photons. By performing Detector Tomography, we improve the recently proposed model [M.K. Akhlaghi and A.H. Majedi, IEEE Trans. Appl. Supercond. 19, 361 (2009)] and also… ▽ More Single Photon Detectors are integral to quantum optics and quantum information. Superconducting Nanowire based detectors exhibit new levels of performance, but have no accepted quantum optical model that is valid for multiple input photons. By performing Detector Tomography, we improve the recently proposed model [M.K. Akhlaghi and A.H. Majedi, IEEE Trans. Appl. Supercond. 19, 361 (2009)] and also investigate the manner in which these detectors respond nonlinearly to light, a valuable feature for some applications. We develop a device independent model for Single Photon Detectors that incorporates this nonlinearity. △ Less

Submitted 18 August, 2011; originally announced August 2011.

Journal ref: Optics Express, Vol. 19, Issue 22, pp. 21305-21312 (2011)

Optimal experiment design revisited: fair, precise and minimal tomography

Authors: J. Nunn, B. J. Smith, G. Puentes, J. S. Lundeen, I. A. Walmsley

Abstract: Given an experimental set-up and a fixed number of measurements, how should one take data in order to optimally reconstruct the state of a quantum system? The problem of optimal experiment design (OED) for quantum state tomography was first broached by Kosut et al. [arXiv:quant-ph/0411093v1]. Here we provide efficient numerical algorithms for finding the optimal design, and analytic results for… ▽ More Given an experimental set-up and a fixed number of measurements, how should one take data in order to optimally reconstruct the state of a quantum system? The problem of optimal experiment design (OED) for quantum state tomography was first broached by Kosut et al. [arXiv:quant-ph/0411093v1]. Here we provide efficient numerical algorithms for finding the optimal design, and analytic results for the case of 'minimal tomography'. We also introduce the average OED, which is independent of the state to be reconstructed, and the optimal design for tomography (ODT), which minimizes tomographic bias. We find that these two designs are generally similar. Monte-Carlo simulations confirm the utility of our results for qubits. Finally, we adapt our approach to deal with constrained techniques such as maximum likelihood estimation. We find that these are less amenable to optimization than cruder reconstruction methods, such as linear inversion. △ Less

Submitted 22 November, 2009; originally announced November 2009.

Comments: 16 pages, 7 figures

Journal ref: Phys. Rev. A 81, 042109 (2010)

Photon pair generation in birefringent optical fibers

Authors: Brian J. Smith, P. Mahou, Offir Cohen, J. S. Lundeen, I. A. Walmsley

Abstract: We study both experimentally and theoretically the generation of photon pairs by spontaneous four-wave mixing (SFWM) in standard birefringent optical fibers. The ability to produce a range of two-photon spectral states, from highly correlated (entangled) to completely factorable, by means of cross-polarized birefringent phase matching, is explored. A simple model is developed to predict the spec… ▽ More We study both experimentally and theoretically the generation of photon pairs by spontaneous four-wave mixing (SFWM) in standard birefringent optical fibers. The ability to produce a range of two-photon spectral states, from highly correlated (entangled) to completely factorable, by means of cross-polarized birefringent phase matching, is explored. A simple model is developed to predict the spectral state of the photon pair which shows how this can be adjusted by choosing the appropriate pump bandwidth, fiber length and birefringence. Spontaneous Raman scattering is modeled to determine the tradeoff between SFWM and background Raman noise, and the predicted results are shown to agree with experimental data. △ Less

Submitted 9 February, 2010; v1 submitted 23 September, 2009; originally announced September 2009.

Comments: 14 pages, 7 figures, revised, published version

Journal ref: Optics Express, Vol. 17 Issue 26, pp.23589-23602 (2009)

Measuring Measurement: Theory and Practice

Authors: A. Feito, J. S. Lundeen, H. Coldenstrodt-Ronge, J. Eisert, M. B. Plenio, I. A. Walmsley

Abstract: Recent efforts have applied quantum tomography techniques to the calibration and characterization of complex quantum detectors using minimal assumptions. In this work we provide detail and insight concerning the formalism, the experimental and theoretical challenges and the scope of these tomographical tools. Our focus is on the detection of photons with avalanche photodiodes and photon number r… ▽ More Recent efforts have applied quantum tomography techniques to the calibration and characterization of complex quantum detectors using minimal assumptions. In this work we provide detail and insight concerning the formalism, the experimental and theoretical challenges and the scope of these tomographical tools. Our focus is on the detection of photons with avalanche photodiodes and photon number resolving detectors and our approach is to fully characterize the quantum operators describing these detectors with a minimal set of well specified assumptions. The formalism is completely general and can be applied to a wide range of detectors △ Less

Submitted 18 June, 2009; originally announced June 2009.

Comments: 22 pages, 27 figures

Journal ref: New J. Phys. 11 (2009) 093038

Absolute efficiency estimation of photon-number-resolving detectors using twin beams

Authors: A. P. Worsley, H. B. Coldenstrodt-Ronge, J. S. Lundeen, P. J. Mosley, B. J. Smith, G. Puentes, N. Thomas-Peter, I. A. Walmsley

Abstract: A nonclassical light source is used to demonstrate experimentally the absolute efficiency calibration of a photon-number-resolving detector. The photon-pair detector calibration method developed by Klyshko for single-photon detectors is generalized to take advantage of the higher dynamic range and additional information provided by photon-number-resolving detectors. This enables the use of brigh… ▽ More A nonclassical light source is used to demonstrate experimentally the absolute efficiency calibration of a photon-number-resolving detector. The photon-pair detector calibration method developed by Klyshko for single-photon detectors is generalized to take advantage of the higher dynamic range and additional information provided by photon-number-resolving detectors. This enables the use of brighter twin-beam sources including amplified pulse pumped sources, which increases the relevant signal and provides measurement redundancy, making the calibration more robust. △ Less

Submitted 11 June, 2009; originally announced June 2009.

Journal ref: Optics Express, 17, 4397 (2009)

Quantum phase estimation with lossy interferometers

Authors: R. Demkowicz-Dobrzanski, U. Dorner, B. J. Smith, J. S. Lundeen, W. Wasilewski, K. Banaszek, I. A. Walmsley

Abstract: We give a detailed discussion of optimal quantum states for optical two-mode interferometry in the presence of photon losses. We derive analytical formulae for the precision of phase estimation obtainable using quantum states of light with a definite photon number and prove that maximization of the precision is a convex optimization problem. The corresponding optimal precision, i.e. the lowest p… ▽ More We give a detailed discussion of optimal quantum states for optical two-mode interferometry in the presence of photon losses. We derive analytical formulae for the precision of phase estimation obtainable using quantum states of light with a definite photon number and prove that maximization of the precision is a convex optimization problem. The corresponding optimal precision, i.e. the lowest possible uncertainty, is shown to beat the standard quantum limit thus outperforming classical interferometry. Furthermore, we discuss more general inputs: states with indefinite photon number and states with photons distributed between distinguishable time bins. We prove that neither of these is helpful in improving phase estimation precision. △ Less

Submitted 18 June, 2009; v1 submitted 2 April, 2009; originally announced April 2009.

Comments: 12 pages, 5 figures

Journal ref: Phys. Rev. A 80, 013825 (2009)

A proposed testbed for detector tomography

Authors: H. B. Coldenstrodt-Ronge, J. S. Lundeen, A. Feito, B. J. Smith, W. Mauerer, Ch. Silberhorn, J. Eisert, M. B. Plenio, I. A. Walmsley

Abstract: Measurement is the only part of a general quantum system that has yet to be characterized experimentally in a complete manner. Detector tomography provides a procedure for doing just this; an arbitrary measurement device can be fully characterized, and thus calibrated, in a systematic way without access to its components or its design. The result is a reconstructed POVM containing the measuremen… ▽ More Measurement is the only part of a general quantum system that has yet to be characterized experimentally in a complete manner. Detector tomography provides a procedure for doing just this; an arbitrary measurement device can be fully characterized, and thus calibrated, in a systematic way without access to its components or its design. The result is a reconstructed POVM containing the measurement operators associated with each measurement outcome. We consider two detectors, a single-photon detector and a photon-number counter, and propose an easily realized experimental apparatus to perform detector tomography on them. We also present a method of visualizing the resulting measurement operators. △ Less

Submitted 25 February, 2009; originally announced February 2009.

Comments: 9 pages, 4 figures

Journal ref: J. Mod. Opt. 56, 432 (2009)

Bridging particle and wave sensitivity in a detector of configurable positive operator-valued measures

Authors: Graciana Puentes, Jeff S. Lundeen, Matthijs P. A. Branderhorst, Hendrik B. Coldenstrodt-Ronge, Brian J. Smith, Ian A. Walmsley

Abstract: We report an optical detector with tunable positive operator-valued measures (POVMs). The device is based on a combination of weak-field homodyne techniques and photon-number-resolving detection. The resulting POVMs can be continuously tuned from Fock-state projectors to a variety of phase-dependent quantum-state measurements by adjusting different system parameters such as local oscillator coup… ▽ More We report an optical detector with tunable positive operator-valued measures (POVMs). The device is based on a combination of weak-field homodyne techniques and photon-number-resolving detection. The resulting POVMs can be continuously tuned from Fock-state projectors to a variety of phase-dependent quantum-state measurements by adjusting different system parameters such as local oscillator coupling, amplitude and phase, allowing thus not only detection but also preparation of exotic quantum states. Experimental tomographic reconstructions of classical benchmark states are presented as a demonstration of the detector capabilities. △ Less

Submitted 9 February, 2009; originally announced February 2009.

Comments: 4 pages, 4 figures, accepted for publication in Phys. Rev. Lett.

Experimental joint weak measurement on a photon pair as a probe of Hardy's Paradox

Authors: J. S. Lundeen, A. M. Steinberg

Abstract: It has been proposed that the ability to perform joint weak measurements on post-selected systems would allow us to study quantum paradoxes. These measurements can investigate the history of those particles that contribute to the paradoxical outcome. Here, we experimentally perform weak measurements of joint (i.e. nonlocal) observables. In an implementation of Hardy's Paradox, we weakly measure… ▽ More It has been proposed that the ability to perform joint weak measurements on post-selected systems would allow us to study quantum paradoxes. These measurements can investigate the history of those particles that contribute to the paradoxical outcome. Here, we experimentally perform weak measurements of joint (i.e. nonlocal) observables. In an implementation of Hardy's Paradox, we weakly measure the locations of two photons, the subject of the conflicting statements behind the Paradox. Remarkably, the resulting weak probabilities verify all these statements but, at the same time, resolve the Paradox. △ Less

Submitted 23 October, 2008; originally announced October 2008.

Journal ref: Phys.Rev.Lett.102:020404,2009

Tailored photon-pair generation in optical fibers

Authors: Offir Cohen, Jeff S. Lundeen, Brian J. Smith, Graciana Puentes, Peter J. Mosley, Ian A. Walmsley

Abstract: We experimentally control the spectral structure of photon pairs created via spontaneous four-wave mixing in microstructured fibers. By fabricating fibers with designed dispersion, one can manipulate the photons' wavelengths, joint spectrum, and, thus, entanglement. As an example, we produce photon-pairs with no spectral correlations, allowing direct heralding of single photons in pure-state wav… ▽ More We experimentally control the spectral structure of photon pairs created via spontaneous four-wave mixing in microstructured fibers. By fabricating fibers with designed dispersion, one can manipulate the photons' wavelengths, joint spectrum, and, thus, entanglement. As an example, we produce photon-pairs with no spectral correlations, allowing direct heralding of single photons in pure-state wave packets without filtering. We achieve an experimental purity of $85.9\pm1.6%$, while theoretical analysis and preliminary tests suggest 94.5% purity is possible with a much longer fiber. △ Less

Submitted 14 April, 2009; v1 submitted 1 September, 2008; originally announced September 2008.

Journal ref: Phys. Rev. Lett. 102 123603 (2009)

Optimal Quantum Phase Estimation

Authors: U. Dorner, R. Demkowicz-Dobrzanski, B. J. Smith, J. S. Lundeen, W. Wasilewski, K. Banaszek, I. A. Walmsley

Abstract: By using a systematic optimization approach we determine quantum states of light with definite photon number leading to the best possible precision in optical two mode interferometry. Our treatment takes into account the experimentally relevant situation of photon losses. Our results thus reveal the benchmark for precision in optical interferometry. Although this boundary is generally worse than… ▽ More By using a systematic optimization approach we determine quantum states of light with definite photon number leading to the best possible precision in optical two mode interferometry. Our treatment takes into account the experimentally relevant situation of photon losses. Our results thus reveal the benchmark for precision in optical interferometry. Although this boundary is generally worse than the Heisenberg limit, we show that the obtained precision beats the standard quantum limit thus leading to a significant improvement compared to classical interferometers. We furthermore discuss alternative states and strategies to the optimized states which are easier to generate at the cost of only slightly lower precision. △ Less

Submitted 6 February, 2009; v1 submitted 23 July, 2008; originally announced July 2008.

Comments: 4 pages, 4 figures. Replaced with final version

Journal ref: Phys. Rev. Lett. 102, 040403 (2009)

Measuring measurement

Authors: J. S. Lundeen, A. Feito, H. Coldenstrodt-Ronge, K. L. Pregnell, Ch. Silberhorn, T. C. Ralph, J. Eisert, M. B. Plenio, I. A. Walmsley

Abstract: Measurement connects the world of quantum phenomena to the world of classical events. It plays both a passive role, observing quantum systems, and an active one, preparing quantum states and controlling them. Surprisingly - in the light of the central status of measurement in quantum mechanics - there is no general recipe for designing a detector that measures a given observable. Compounding thi… ▽ More Measurement connects the world of quantum phenomena to the world of classical events. It plays both a passive role, observing quantum systems, and an active one, preparing quantum states and controlling them. Surprisingly - in the light of the central status of measurement in quantum mechanics - there is no general recipe for designing a detector that measures a given observable. Compounding this, the characterization of existing detectors is typically based on partial calibrations or elaborate models. Thus, experimental specification (i.e. tomography) of a detector is of fundamental and practical importance. Here, we present the realization of quantum detector tomography: we identify the optimal positive-operator-valued measure describing the detector, with no ancillary assumptions. This result completes the triad, state, process, and detector tomography, required to fully specify an experiment. We characterize an avalanche photodiode and a photon number resolving detector capable of detecting up to eight photons. This creates a new set of tools for accurately detecting and preparing non-classical light. △ Less

Submitted 15 July, 2008; originally announced July 2008.

Comments: 6 pages, 4 figures,see video abstract at http://www.quantiki.org/video_abstracts/08072444

Journal ref: Nature Physics 5, 27 (2009)

Conditional preparation of single photons using parametric downconversion: A recipe for purity

Authors: Peter J Mosley, Jeff S Lundeen, Brian J Smith, Ian A Walmsley

Abstract: In an experiment reported recently [Phys. Rev. Lett. 100, 133601 (2008)], we demonstrated that, through group velocity matched parametric downconversion, heralded single photons can be generated in pure quantum states without spectral filtering. The technique relies on factorable photon pair production, initially developed theoretically in the strict collinear regime; focusing - required in any… ▽ More In an experiment reported recently [Phys. Rev. Lett. 100, 133601 (2008)], we demonstrated that, through group velocity matched parametric downconversion, heralded single photons can be generated in pure quantum states without spectral filtering. The technique relies on factorable photon pair production, initially developed theoretically in the strict collinear regime; focusing - required in any experimental implementation - can ruin this factorability. Here we present the numerical model used to design our single photon sources and minimize spectral correlations in the light of such experimental considerations. Furthermore, we show that the results of our model are in good agreement with measurements made on the photon pairs and give a detailed description of the exact requirements for constructing this type of source. △ Less

Submitted 9 July, 2008; originally announced July 2008.

Comments: 27 pages, 14 figures, submitted to NJP

Heralded Generation of Ultrafast Single Photons in Pure Quantum States

Authors: Peter J. Mosley, Jeff S. Lundeen, Brian J. Smith, Piotr Wasylczyk, Alfred B. U'Ren, Christine Silberhorn, Ian A. Walmsley

Abstract: We present an experimental demonstration of heralded single photons prepared in pure quantum states from a parametric downconversion source. It is shown that, through controlling the modal structure of the photon pair emission, one can generate pairs in factorable states and thence eliminate the need for spectral filters in multiple-source interference schemes. Indistinguishable heralded photons… ▽ More We present an experimental demonstration of heralded single photons prepared in pure quantum states from a parametric downconversion source. It is shown that, through controlling the modal structure of the photon pair emission, one can generate pairs in factorable states and thence eliminate the need for spectral filters in multiple-source interference schemes. Indistinguishable heralded photons were generated in two independent spectrally engineered sources, and, by performing a Hong-Ou-Mandel interference between them without spectral filters at a raw visibility of 94.4%, their purity was measured to be over 95%. △ Less

Submitted 7 November, 2007; originally announced November 2007.

Comments: 5 pages, 4 figures

Photon pair-state preparation with tailored spectral properties by spontaneous four-wave mixing in photonic-crystal fiber

Authors: K. Garay-Palmett, H. J. McGuinness, Offir Cohen, J. S. Lundeen, R. Rangel-Rojo, A. B. U'Ren, M. G. Raymer, C. J. McKinstrie, S. Radic, I. A. Walmsley

Abstract: We study theoretically the generation of photon pairs by spontaneous four-wave mixing (SFWM) in photonic crystal optical fiber. We show that it is possible to engineer two-photon states with specific spectral correlation (``entanglement'') properties suitable for quantum information processing applications. We focus on the case exhibiting no spectral correlations in the two-photon component of t… ▽ More We study theoretically the generation of photon pairs by spontaneous four-wave mixing (SFWM) in photonic crystal optical fiber. We show that it is possible to engineer two-photon states with specific spectral correlation (``entanglement'') properties suitable for quantum information processing applications. We focus on the case exhibiting no spectral correlations in the two-photon component of the state, which we call factorability, and which allows heralding of single-photon pure-state wave packets without the need for spectral post filtering. We show that spontaneous four wave mixing exhibits a remarkable flexibility, permitting a wider class of two-photon states, including ultra-broadband, highly-anticorrelated states. △ Less

Submitted 19 September, 2007; originally announced September 2007.

Comments: 17 pages, 7 figures, submitted

Journal ref: Opt. Express 15, 14870-14886 (2007)