-
Terahertz pulse generation with binary phase control in non-linear InAs metasurface
Authors:
Hyunseung Jung,
Lucy L. Hale,
Sylvain D. Gennaro,
Jayson Briscoe,
Prasad P. Iyer,
Chloe F. Doiron,
C. Thomas Harris,
Ting Shan Luk,
Sadhvikas J Addamane,
John L. Reno,
Igal Brener,
Oleg Mitrofanov
Abstract:
The effect of terahertz (THz) pulse generation has revolutionized broadband coherent spectroscopy and imaging at THz frequencies. However, THz pulses typically lack spatial structure, whereas structured beams are becoming essential for advanced spectroscopy applications. Non-linear optical metasurfaces with nanoscale THz emitters can provide a solution by defining the beam structure at the generat…
▽ More
The effect of terahertz (THz) pulse generation has revolutionized broadband coherent spectroscopy and imaging at THz frequencies. However, THz pulses typically lack spatial structure, whereas structured beams are becoming essential for advanced spectroscopy applications. Non-linear optical metasurfaces with nanoscale THz emitters can provide a solution by defining the beam structure at the generation stage. We develop a non-linear InAs metasurface consisting of nanoscale optical resonators for simultaneous generation and structuring of THz beams. We find that THz pulse generation in the resonators is governed by optical rectification. It is more efficient than in ZnTe crystals, and it allows us to control the pulse polarity and amplitude, offering a platform for realizing binary-phase THz metasurfaces. To illustrate this capability, we demonstrate an InAs metalens, which simultaneously generates and focuses THz pulses. The control of spatiotemporal structure using nanoscale emitters opens doors for THz beam engineering and advanced spectroscopy and imaging applications.
△ Less
Submitted 7 November, 2022;
originally announced November 2022.
-
Suppression of mid-infrared plasma resonance due to quantum confinement in delta-doped silicon
Authors:
Steve M. Young,
Aaron M. Katzenmeyer,
Evan M. Anderson,
Ting S. Luk,
Jeffrey A. Ivie,
Scott W. Schmucker,
Xujiao Gao,
Shashank Misra
Abstract:
The classical Drude model provides an accurate description of the plasma resonance of three-dimensional materials, but only partially explains two-dimensional systems where quantum mechanical effects dominate such as P:$δ$-layers - atomically thin sheets of phosphorus dopants in silicon that induce novel electronic properties beyond traditional do**. Previously it was shown that P:$δ$-layers pro…
▽ More
The classical Drude model provides an accurate description of the plasma resonance of three-dimensional materials, but only partially explains two-dimensional systems where quantum mechanical effects dominate such as P:$δ$-layers - atomically thin sheets of phosphorus dopants in silicon that induce novel electronic properties beyond traditional do**. Previously it was shown that P:$δ$-layers produce a distinct Drude tail feature in ellipsometry measurements. However, the ellipsometric spectra could not be properly fit by modeling the $δ$-layer as discrete layer of classical Drude metal. In particular, even for large broadening corresponding to extremely short relaxation times, a plasma resonance feature was anticipated but not evident in the experimental data. In this work, we develop a physically accurate description of this system, which reveals a general approach to designing thin films with intentionally suppressed plasma resonances. Our model takes into account the strong charge density confinement and resulting quantum mechanical description of a P:$δ$-layer. We show that the absence of a plasma resonance feature results from a combination of two factors: i), the sharply varying charge density profile due to strong confinement in the direction of growth; and ii), the effective mass and relaxation time anisotropy due to valley degeneracy. The plasma resonance reappears when the atoms composing the $δ$-layer are allowed to diffuse out from the plane of the layer, destroying its well-confined two-dimensional character that is critical to its novel electronic properties.
△ Less
Submitted 7 March, 2023; v1 submitted 19 October, 2022;
originally announced October 2022.
-
Manipulation of Exciton Dynamics in Single-Layer WSe2 Using a Toroidal Dielectric Metasurface
Authors:
Long Yuan,
Jeeyoon Jeong,
Kevin Wen Chi Kwock,
Emanuil S. Yanev,
Michael Grandel,
Daniel Rhodes,
Ting S. Luk,
P. James Schuck,
Dmitry Yarotski,
James C. Hone,
Igal Brener,
Rohit P. Prasankumar
Abstract:
Recent advances in emerging atomically thin transition metal dichalcogenide semiconductors with strong light-matter interactions and tunable optical properties provide novel approaches for realizing new material functionalities. Coupling two-dimensional semiconductors with all-dielectric resonant nanostructures represents an especially attractive opportunity for manipulating optical properties in…
▽ More
Recent advances in emerging atomically thin transition metal dichalcogenide semiconductors with strong light-matter interactions and tunable optical properties provide novel approaches for realizing new material functionalities. Coupling two-dimensional semiconductors with all-dielectric resonant nanostructures represents an especially attractive opportunity for manipulating optical properties in both the near-field and far-field regimes. Here, by integrating single-layer WSe2 and titanium oxide (TiO2) dielectric metasurfaces with toroidal resonances, we realized robust exciton emission enhancement over one order of magnitude at both room and low temperatures. Furthermore, we could control exciton dynamics and annihilation by using temperature to tailor the spectral overlap of excitonic and toroidal resonances, allowing us to selectively enhance the Purcell effect. Our results provide rich physical insight into the strong light-matter interactions in single-layer TMDs coupled with toroidal dielectric metasurfaces, with important implications for optoelectronics and photonics applications.
△ Less
Submitted 8 November, 2021;
originally announced November 2021.
-
Spatiotemporal refraction of light in an epsilon-near-zero ITO layer
Authors:
Justus Bohn,
Ting Shan Luk,
Euan Hendry
Abstract:
When light travels through a medium in which the refractive index is rapidly changing with time, the light will undergo a shift in its frequency. Large frequency shifting effects have recently been reported for transparent conductive oxides. These observations have been interpreted as emerging from temporal changes to the propagation phase in a bulk medium resulting from temporal variations in the…
▽ More
When light travels through a medium in which the refractive index is rapidly changing with time, the light will undergo a shift in its frequency. Large frequency shifting effects have recently been reported for transparent conductive oxides. These observations have been interpreted as emerging from temporal changes to the propagation phase in a bulk medium resulting from temporal variations in the refractive index, an effect referred to as temporal refraction. Here, we show that the frequency shift in an epsilon-near-zero (ENZ) layer made of indium tin oxide (ITO) originates not only from this bulk response, but includes a significant effect resulting from temporal changes to the spatial boundary conditions. This boundary effect can lead to a dominant opposing shift to the bulk effect for certain angles. Hence, this process gives rise to a frequency shift that can be tailored through the angle of incidence, decoupling the amplitude and phase modulation.
△ Less
Submitted 13 July, 2021;
originally announced July 2021.
-
High-harmonic generation from an epsilon-near-zero material
Authors:
Yuanmu Yang,
Jian Lu,
Alejandro Manjavacas,
Ting S. Luk,
Hanzhe Liu,
Kyle Kelley,
Jon-Paul Maria,
Michael B. Sinclair,
Shambhu Ghimire,
Igal Brener
Abstract:
High-harmonic generation (HHG) from a compact, solid-state medium is highly desirable for applications such as coherent attosecond pulse generation and extreme ultra-violet (EUV) spectroscopy, yet the typically weak conversion of pump light to HHG can largely hinder its applications. Here, we use a material operating in its epsilon-near-zero (ENZ) region, where the real part of its permittivity va…
▽ More
High-harmonic generation (HHG) from a compact, solid-state medium is highly desirable for applications such as coherent attosecond pulse generation and extreme ultra-violet (EUV) spectroscopy, yet the typically weak conversion of pump light to HHG can largely hinder its applications. Here, we use a material operating in its epsilon-near-zero (ENZ) region, where the real part of its permittivity vanishes, to greatly boost the efficiency of the HHG process at the microscopic level. In experiments, we report high-harmonic emission up to the 9th order directly from a low-loss, solid-state ENZ medium: indium-doped cadmium oxide, with an excitation intensity at the GW cm-2 level. Furthermore, the observed HHG signal exhibits a pronounced spectral red-shift as well as linewidth broadening, resulting from the photo-induced electron heating and the consequent time-dependent resonant frequency of the ENZ film. Our results provide a novel nanophotonic platform for strong field physics, reveal new degrees of freedom for spectral and temporal control of HHG, and open up possibilities of compact solid-state attosecond light sources.
△ Less
Submitted 10 February, 2019;
originally announced February 2019.
-
High-Temperature Refractory Metasurfaces for Solar Thermophotovoltaic Energy Harvesting
Authors:
Chun-Chieh Chang,
Wilton J. M. Kort-Kamp,
John Nogan,
Ting S. Luk,
Abul K. Azad,
Antoinette J. Taylor,
Diego A. R. Dalvit,
Milan Sykora,
Hou-Tong Chen
Abstract:
Solar energy promises a viable solution to meet the ever-increasing power demand by providing a clean, renewable energy alternative to fossil fuels. For solar thermophotovoltaics (STPV), high-temperature absorbers and emitters with strong spectral selectivity are imperative to efficiently couple solar radiation into photovoltaic cells. Here, we demonstrate refractory metasurfaces for STPV with tai…
▽ More
Solar energy promises a viable solution to meet the ever-increasing power demand by providing a clean, renewable energy alternative to fossil fuels. For solar thermophotovoltaics (STPV), high-temperature absorbers and emitters with strong spectral selectivity are imperative to efficiently couple solar radiation into photovoltaic cells. Here, we demonstrate refractory metasurfaces for STPV with tailored absorptance and emittance characterized by in-situ high-temperature measurements, featuring thermal stability up to at least 1200 C. Our tungsten-based metasurface absorbers have close-to-unity absorption from visible to near infrared and strongly suppressed emission at longer wavelengths, while our metasurface emitters provide wavelength-selective emission spectrally matched to the band-edge of InGaAsSb photovoltaic cells. The projected overall STPV efficiency is as high as 18% when employing a fully integrated absorber/emitter metasurface structure, much higher than those achievable by stand-alone PV cells. Our work opens a path forward for high-performance STPV systems based on refractory metasurface structures.
△ Less
Submitted 5 November, 2018;
originally announced November 2018.
-
Experimental Observation of Strong Coupling Between an Epsilon-Near-Zero Mode in a Deep Subwavelength Nanofilm and a Gap Plasmon Mode
Authors:
Joshua R. Hendrickson,
Shivashankar Vangala,
Chandriker K. Dass,
Ricky Gibson,
Kevin Leedy,
Dennis Walker,
Justin W. Cleary,
Ting S. Luk,
Junpeng Guo
Abstract:
Strong coupling is a phenomenon which occurs when the interaction between two resonance systems is so strong that the oscillatory energy exchange between them exceeds all dissipative loss channels. Each resonance can then no longer be described individually but only as a part of the coupled, hybrid system. Here, we show that strong coupling can occur in a deep subwavelength nanofilm supporting an…
▽ More
Strong coupling is a phenomenon which occurs when the interaction between two resonance systems is so strong that the oscillatory energy exchange between them exceeds all dissipative loss channels. Each resonance can then no longer be described individually but only as a part of the coupled, hybrid system. Here, we show that strong coupling can occur in a deep subwavelength nanofilm supporting an epsilon near zero mode which is integrated into a metal-insulator-metal gap plasmon structure. To generate an epsilon near zero mode resonance in the short-wave infrared region, an indium tin oxide nanofilm of ~lambda/100 thickness is used. A polariton splitting value of 27%, corresponding to a normalized coupling rate of 0.135, is experimentally demonstrated. Simulations indicate that much larger coupling rates, well within the ultra-strong regime where the energy exchange rate is comparable with the frequency of light, are possible.
△ Less
Submitted 9 January, 2018;
originally announced January 2018.
-
Viscoelastic optical nonlocality of low-loss epsilon-near-zero nanofilms
Authors:
Domenico de Ceglia,
Michael Scalora,
Maria A. Vincenti,
Salvatore Campione,
Kyle Kelley,
Evan L. Runnerstrom,
Jon-Paul Maria,
Gordon A. Keeler,
Ting S. Luk
Abstract:
Optical nonlocalities are elusive and hardly observable in traditional plasmonic materials like noble and alkali metals. Here we report experimental observation of viscoelastic nonlocalities in the infrared optical response of doped cadmium-oxide, epsilon-near-zero nanofilms. The nonlocality is detectable thanks to the low dam** rate of conduction electrons and the virtual absence of interband t…
▽ More
Optical nonlocalities are elusive and hardly observable in traditional plasmonic materials like noble and alkali metals. Here we report experimental observation of viscoelastic nonlocalities in the infrared optical response of doped cadmium-oxide, epsilon-near-zero nanofilms. The nonlocality is detectable thanks to the low dam** rate of conduction electrons and the virtual absence of interband transitions at infrared wavelengths. We describe the motion of conduction electrons using a hydrodynamic model for a viscoelastic fluid, and find excellent agreement with experimental results. The electrons elasticity blue-shifts the infrared plasmonic resonance associated with the main epsilon-near-zero mode, and triggers the onset of higher-order resonances due to the excitation of electron-pressure modes above the bulk plasma frequency. We also provide evidence of the existence of nonlocal dam**, i.e., viscosity, in the motion of optically-excited conduction electrons using a combination of spectroscopic ellipsometry data and predictions based on the viscoelastic hydrodynamic model.
△ Less
Submitted 18 December, 2017; v1 submitted 8 December, 2017;
originally announced December 2017.
-
Giant Field Enhancement in Longitudinal Epsilon Near Zero Films
Authors:
Mohammad Kamandi,
Caner Guclu,
Ting Shan Luk,
George T. Wang,
Filippo Capolino
Abstract:
We report that a longitudinal epsilon-near-zero (LENZ) film leads to giant field enhancement and strong radiation emission of sources in it and that these features are superior to what found in previous studies related to isotropic ENZ. LENZ films are uniaxially anisotropic films where relative permittivity along the normal direction to the film is much smaller than unity, while the permittivity i…
▽ More
We report that a longitudinal epsilon-near-zero (LENZ) film leads to giant field enhancement and strong radiation emission of sources in it and that these features are superior to what found in previous studies related to isotropic ENZ. LENZ films are uniaxially anisotropic films where relative permittivity along the normal direction to the film is much smaller than unity, while the permittivity in the transverse plane of the film is not vanishing. It has been shown previously that realistic isotropic ENZ films do not provide large field enhancement due to material losses, however, we show the loss effects can be overcome using LENZ films. We also prove that in comparison to the (isotropic) ENZ case, the LENZ film field enhancement is not only remarkably larger but it also occurs for a wider range of angles of incidence. Importantly, the field enhancement near the interface of the LENZ film is almost independent of the thickness unlike for the isotropic ENZ case where extremely small thickness is required. We show that for a LENZ structure consisting of a multilayer of dysprosium-doped cadmium oxide and silicon accounting for realistic losses, field intensity enhancement of 30 is obtained which is almost 10 times larger than that obtained with realistic ENZ materials
△ Less
Submitted 2 February, 2017; v1 submitted 30 January, 2017;
originally announced January 2017.
-
Broken symmetry dielectric resonators for high quality-factor Fano metasurfaces
Authors:
Salvatore Campione,
Sheng Liu,
Lorena I. Basilio,
Larry K. Warne,
William L. Langston,
Ting S. Luk,
Joel R. Wendt,
John L. Reno,
Gordon A. Keeler,
Igal Brener,
Michael B. Sinclair
Abstract:
We present a new approach to dielectric metasurface design that relies on a single resonator per unit cell and produces robust, high quality-factor Fano resonances. Our approach utilizes symmetry breaking of highly symmetric resonator geoemetries, such as cubes, to induce couplings between the otherwise orthogonal resonator modes. In particular, we design perturbations that couple "bright" dipole…
▽ More
We present a new approach to dielectric metasurface design that relies on a single resonator per unit cell and produces robust, high quality-factor Fano resonances. Our approach utilizes symmetry breaking of highly symmetric resonator geoemetries, such as cubes, to induce couplings between the otherwise orthogonal resonator modes. In particular, we design perturbations that couple "bright" dipole modes to "dark" dipole modes whose radiative decay is suppressed by local field effects in the array. Our approach is widely scalable from the near-infrared to radio frequencies. We first unravel the Fano resonance behavior through numerical simulations of a germanium resonator-based metasurface that achieved a quality-factor of ~1300 at ~10.8 um. Then, we present two experimental demonstrations operating in the near-infrared (~1 um): a silicon-based implementation that achieved a quality-factor of ~350; and a gallium arsenide-based structure that achieves a quality-factor of ~600 - the highest near-infrared quality-factor experimentally demonstrated to date with this kind of metasurfaces. Importantly, large electromagnetic field enhancements appear within the resonators at the Fano resonant frequencies. We envision that combining high-quality factor, high field enhancement resonances with nonlinear and active/gain materials such as gallium arsenide will lead to new classes of active optical devices.
△ Less
Submitted 21 July, 2016;
originally announced July 2016.
-
Metasurface Broadband Solar Absorber
Authors:
A. K. Azad,
W. J. M. Kort-Kamp,
M. Sykora,
N. R. Weisse-Bernstein,
T. S. Luk,
A. J. Taylor,
D. A. R. Dalvit,
H. -T. Chen
Abstract:
We demonstrate a broadband, polarization independent, omnidirectional absorber based on a metallic metasurface architecture, which accomplishes greater than 90% absorptance in the visible and near-infrared range of the solar spectrum, and exhibits low emissivity at mid- and far-infrared wavelengths. The complex unit cell of the metasurface solar absorber consists of eight pairs of gold nano-resona…
▽ More
We demonstrate a broadband, polarization independent, omnidirectional absorber based on a metallic metasurface architecture, which accomplishes greater than 90% absorptance in the visible and near-infrared range of the solar spectrum, and exhibits low emissivity at mid- and far-infrared wavelengths. The complex unit cell of the metasurface solar absorber consists of eight pairs of gold nano-resonators that are separated from a gold ground plane by a thin silicon dioxide spacer. Our experimental measurements reveal high-performance absorption over a wide range of incidence angles for both s- and p-polarizations. We also investigate numerically the frequency-dependent field and current distributions to elucidate how the absorption occurs within the metasurface structure. Furthermore, we discuss the potential use of our metasurface absorber design in solar thermophotovoltaics by exploiting refractory plasmonic materials.
△ Less
Submitted 22 September, 2015;
originally announced September 2015.
-
Nonlocal effective medium analysis in symmetric metal-dielectric multilayer metamaterials
Authors:
Lei Sun,
Zhigang Li,
Ting S. Luk,
Xiaodong Yang,
Jie Gao
Abstract:
The optical nonlocality in symmetric metal-dielectric multilayer metamaterials is theoretically and experimentally investigated with respect to transverse-magnetic-polarized incident light. A nonlocal effective medium theory is derived from the transfer-matrix method to determine the nonlocal effective permittivity depending on both the frequency and wave vector in a symmetric metal-dielectric mul…
▽ More
The optical nonlocality in symmetric metal-dielectric multilayer metamaterials is theoretically and experimentally investigated with respect to transverse-magnetic-polarized incident light. A nonlocal effective medium theory is derived from the transfer-matrix method to determine the nonlocal effective permittivity depending on both the frequency and wave vector in a symmetric metal-dielectric multilayer stack. In contrast to the local effective medium theory, our proposed nonlocal effective medium theory can accurately predict measured incident angle-dependent reflection spectra from a fabricated multilayer stack and provide nonlocal dispersion relations. Moreover, the bulk plasmon polaritons with large wave vectors supported in the multilayer stack are also investigated with the nonlocal effective medium theory through the analysis of the dispersion relation and eigenmode.
△ Less
Submitted 29 May, 2015;
originally announced June 2015.
-
Quantum-Spillover-Enhanced Surface-Plasmonic Absorption at the Interface of Silver and High-Index Dielectrics
Authors:
Dafei **,
Qing Hu,
Daniel Neuhauser,
Felix von Cube,
Yingyi Yang,
Ritesh Sachan,
Ting S. Luk,
David C. Bell,
Nicholas X. Fang
Abstract:
We demonstrate an unexpectedly strong surface-plasmonic absorption at the interface of silver and high-index dielectrics based on electron and photon spectroscopy. The measured bandwidth and intensity of absorption deviate significantly from the classical theory. Our density-functional calculation well predicts the occurrence of this phenomenon. It reveals that due to the low metal-to-dielectric w…
▽ More
We demonstrate an unexpectedly strong surface-plasmonic absorption at the interface of silver and high-index dielectrics based on electron and photon spectroscopy. The measured bandwidth and intensity of absorption deviate significantly from the classical theory. Our density-functional calculation well predicts the occurrence of this phenomenon. It reveals that due to the low metal-to-dielectric work function at such interfaces, conduction electrons can display a drastic quantum spillover, causing the interfacial electron-hole pair production to dominate the decay of surface plasmons. This finding can be of fundamental importance in understanding and designing quantum nano-plasmonic devices that utilize noble metals and high-index dielectrics.
△ Less
Submitted 29 October, 2015; v1 submitted 29 April, 2015;
originally announced April 2015.
-
Realizing high-quality, ultra-large momentum states using semiconductor hyperbolic metamaterials
Authors:
Salvatore Campione,
Sheng Liu,
Ting S. Luk,
Michael B. Sinclair
Abstract:
We employ both the effective medium approximation (EMA) and Bloch theory to compare the dispersion properties of semiconductor hyperbolic metamaterials (SHMs) at mid-infrared frequencies and metallic hyperbolic metamaterials (MHMs) at visible frequencies. This analysis reveals the conditions under which the EMA can be safely applied for both MHMs and SHMs. We find that the combination of precise n…
▽ More
We employ both the effective medium approximation (EMA) and Bloch theory to compare the dispersion properties of semiconductor hyperbolic metamaterials (SHMs) at mid-infrared frequencies and metallic hyperbolic metamaterials (MHMs) at visible frequencies. This analysis reveals the conditions under which the EMA can be safely applied for both MHMs and SHMs. We find that the combination of precise nanoscale layering and the longer infrared operating wavelengths puts the SHMs well within the effective medium limit and, in contrast to MHMs, allows the attainment of very high photon momentum states. In addition, SHMs allow for new phenomena such as ultrafast creation of the hyperbolic manifold through optical pum**. In particular, we examine the possibility of achieving ultrafast topological transitions through optical pum** which can photo-dope appropriately designed quantum wells on the femtosecond time scale.
△ Less
Submitted 20 March, 2015;
originally announced March 2015.
-
Enhanced third harmonic generation from the epsilon-near-zero modes of ultrathin films
Authors:
Ting S. Luk,
Domenico de Ceglia,
Sheng Liu,
Gordon A. Keeler,
Rohit P. Prasankumar,
Maria A. Vincenti,
Michael Scalora,
Michael B. Sinclair,
Salvatore Campione
Abstract:
We experimentally demonstrate efficient third harmonic generation from an indium tin oxide (ITO) nanofilm (lambda/42 thick) on a glass substrate for a pump wavelength of 1.4 um. A conversion efficiency of 3.3x10^-6 is achieved by exploiting the field enhancement properties of the epsilon-near-zero (ENZ) mode with an enhancement factor of 200. This nanoscale frequency conversion method is applicabl…
▽ More
We experimentally demonstrate efficient third harmonic generation from an indium tin oxide (ITO) nanofilm (lambda/42 thick) on a glass substrate for a pump wavelength of 1.4 um. A conversion efficiency of 3.3x10^-6 is achieved by exploiting the field enhancement properties of the epsilon-near-zero (ENZ) mode with an enhancement factor of 200. This nanoscale frequency conversion method is applicable to other plasmonic materials and reststrahlen materials in proximity of the longitudinal optical phonon frequencies.
△ Less
Submitted 13 February, 2015;
originally announced February 2015.
-
Radiative Emission Enhancement Using Nano-antennas Made of Hyperbolic Metamaterial Resonators
Authors:
Caner Guclu,
Ting Shan Luk,
George T. Wang,
Filippo Capolino
Abstract:
A hyperbolic metamaterial (HM) resonator is analyzed as a nano-antenna for enhancing the radiative emission of quantum emitters in its vicinity. It has been shown that the spontaneous emission rate by an emitter near a hyperbolic metamaterial substrate is enhanced dramatically due to very large density of states. However, enhanced coupling to the free-space, which is central to applications such a…
▽ More
A hyperbolic metamaterial (HM) resonator is analyzed as a nano-antenna for enhancing the radiative emission of quantum emitters in its vicinity. It has been shown that the spontaneous emission rate by an emitter near a hyperbolic metamaterial substrate is enhanced dramatically due to very large density of states. However, enhanced coupling to the free-space, which is central to applications such as solid-state lighting, has not been investigated significantly. Here, we numerically demonstrate approximately 100 times enhancement of the free-space radiative emission at 660 nm wavelength by utilizing a cylindrical HM resonator with a radius of 54 nm and a height of 80 nm on top of an opaque silver-cladded substrate. We also show how the free-space radiation enhancement factor depends on the dipole orientation and the location of the emitter near the subwavelength resonator. Furthermore, we calculate that an array of HM resonators with subwavelength spacings can maintain most of the enhancement effect of a single resonator.
△ Less
Submitted 13 August, 2014; v1 submitted 23 May, 2014;
originally announced May 2014.
-
Directional perfect absorption using deep subwavelength low permittivity films
Authors:
Ting S. Luk,
Salvatore Campione,
Iltai Kim,
Simin Feng,
Young Chul Jun,
Sheng Liu,
Jeremy B. Wright,
Igal Brener,
Peter B. Catrysse,
Shanhui Fan,
Michael B. Sinclair
Abstract:
We experimentally demonstrate single beam directional perfect absorption (to within experimental accuracy) of p-polarized light in the near-infrared using unpatterned, deep subwavelength films of indium tin oxide (ITO) on Ag. The experimental perfect absorption occurs slightly above the epsilon-near-zero (ENZ) frequency of ITO where the permittivity is less than one. Remarkably, we obtain perfect…
▽ More
We experimentally demonstrate single beam directional perfect absorption (to within experimental accuracy) of p-polarized light in the near-infrared using unpatterned, deep subwavelength films of indium tin oxide (ITO) on Ag. The experimental perfect absorption occurs slightly above the epsilon-near-zero (ENZ) frequency of ITO where the permittivity is less than one. Remarkably, we obtain perfect absorption for films whose thickness is as low as ~1/50th of the operating free-space wavelength and whose single pass attenuation is only ~ 5%. We further derive simple analytical conditions for perfect absorption in the subwavelength-film regime that reveal the constraints that the ITO permittivity must satisfy if perfect absorption is to be achieved. Then, to get a physical insight on the perfect absorption properties, we analyze the eigenmodes of the layered structure by computing both the real-frequency/complex-wavenumber and the complex-frequency/real-wavenumber modal dispersion diagrams. These analyses allow us to attribute the experimental perfect absorption behavior to the crossover between bound and leaky behavior of one eigenmode of the layered structure. Both modal methods show that perfect absorption occurs at a frequency slightly larger than the ENZ frequency, in agreement with experimental results, and both methods predict a second perfect absorption condition at higher frequencies attributed to another crossover between bound and leaky behavior of the same eigenmode. Our results greatly expand the list of materials that can be considered for use as ultrathin perfect absorbers and also provide a methodology for the design of absorber systems at any desired frequency.
△ Less
Submitted 24 July, 2014; v1 submitted 21 May, 2014;
originally announced May 2014.