Showing 1–10 of 10 results for author: Lucas, I

Design and Implementation of a New Apparatus for Astrochemistry: Kinetic Measurements of the CH + OCS Reaction and Frequency Comb Spectroscopy in a Cold Uniform Supersonic Flow

Authors: Daniel I. Lucas, Théo Guillaume, Dwayne E. Heard, Julia H. Lehman

Abstract: We present the development of a new astrochemical research tool HILTRAC, the Highly Instrumented Low Temperature ReAction Chamber. The instrument is based on a pulsed form of the CRESU (Cinétique de Réaction en Écoulement Supersonique Uniforme, meaning reaction kinetics in a uniform supersonic flow) apparatus, with the aim of collecting kinetics and spectroscopic information on gas phase chemical… ▽ More We present the development of a new astrochemical research tool HILTRAC, the Highly Instrumented Low Temperature ReAction Chamber. The instrument is based on a pulsed form of the CRESU (Cinétique de Réaction en Écoulement Supersonique Uniforme, meaning reaction kinetics in a uniform supersonic flow) apparatus, with the aim of collecting kinetics and spectroscopic information on gas phase chemical reactions important in interstellar space or planetary atmospheres. We discuss the apparatus design and its flexibility, the implementation of pulsed laser photolysis followed by laser induced fluorescence (PLP-LIF), and the first implementation of direct infrared frequency comb spectroscopy (DFCS) coupled to the uniform supersonic flow. Achievable flow temperatures range from 32(3) - 111(9) K, characterising a total of five Laval nozzles for use with N2 and Ar buffer gases by pressure impact measurements. These results were further validated using LIF and DFCS measurements of the CH radical and OCS, respectively. Spectroscopic constants and linelists for OCS are reported for the 1001 band near $2890 - 2940 cm^{-1}$ for both $OC^{32}S$ and $OC^{34}S$, measured using DFCS. Additional peaks in the spectrum are tentatively assigned to the OCS-Ar complex. The first reaction rate coefficients for the CH + OCS reaction measured between 32(3) K and 58(5) K are reported. The reaction rate coefficient at 32(3) K was measured to be $3.9(4) \times 10^{10} cm^3 molecule^{-1} s^{-1}$ and the reaction was found to exhibit no observable temperature dependence over this low temperature range. △ Less

Submitted 29 May, 2024; originally announced May 2024.

Comments: The following article has been submitted to The Journal of Chemical Physics. After it is published, it will be found at https://publishing.aip.org/resources/librarians/products/journals/ Copyright 2024 Daniel I. Lucas, Théo Guillaume, Dwayne E. Heard, and Julia H. Lehman. This article is distributed under a Creative Commons Attribution (CC BY) License

Tuning Coherent-Phonon Heat Transport in LaCoO$_3$/SrTiO$_3$ Superlattices

Authors: D. Bugallo, E. Langenberg, E. Carbó-Argibay, Noa Varela Domínguez, A. O. Fumega, V. Pardo, Irene Lucas, Luis Morellón, F. Rivadulla

Abstract: Accessing the regime of coherent phonon propagation in nanostructures opens enormous possibilities to control the thermal conductivity in energy harvesting devices, phononic circuits, etc. In this paper we show that coherent phonons contribute substantially to the thermal conductivity of LaCoO3/SrTiO3 oxide superlattices, up to room temperature. We show that their contribution can be tuned through… ▽ More Accessing the regime of coherent phonon propagation in nanostructures opens enormous possibilities to control the thermal conductivity in energy harvesting devices, phononic circuits, etc. In this paper we show that coherent phonons contribute substantially to the thermal conductivity of LaCoO3/SrTiO3 oxide superlattices, up to room temperature. We show that their contribution can be tuned through small variations of the superlattice periodicity, without changing the total superlattice thickness. Using this strategy, we tuned the thermal conductivity by 20% at room temperature. We also discuss the role of interface mixing and epitaxial relaxation as an extrinsic, material dependent key parameter for understanding the thermal conductivity of oxide superlattices. △ Less

Submitted 25 November, 2021; originally announced November 2021.

Comments: 19 pages, 10 figures (supplementary material included)

Transition of laser-induced terahertz spin currents from torque- to conduction-electron-mediated transport

Authors: Pilar Jiménez-Cavero, Oliver Gueckstock, Lukáš Nádvorník, Irene Lucas, Tom S. Seifert, Martin Wolf, Reza Rouzegar, Piet W. Brouwer, Sven Becker, Gerhard Jakob, Mathias Kläui, Chenyang Guo, Caihua Wan, Xiufeng Han, Zuanming **, Hui Zhao, Di Wu, Luis Morellón, Tobias Kampfrath

Abstract: Spin transport is crucial for future spintronic devices operating at bandwidths up to the terahertz (THz) range. In F|N thin-film stacks made of a ferro/ferrimagnetic layer F and a normal-metal layer N, spin transport is mediated by (1) spin-polarized conduction electrons and/or (2) torque between electron spins. To identify a cross-over from (1) to (2), we study laser-driven spin currents in F|Pt… ▽ More Spin transport is crucial for future spintronic devices operating at bandwidths up to the terahertz (THz) range. In F|N thin-film stacks made of a ferro/ferrimagnetic layer F and a normal-metal layer N, spin transport is mediated by (1) spin-polarized conduction electrons and/or (2) torque between electron spins. To identify a cross-over from (1) to (2), we study laser-driven spin currents in F|Pt stacks where F consists of model materials with different degrees of electrical conductivity. For the magnetic insulators YIG, GIG and maghemite, identical dynamics is observed. It arises from the THz interfacial spin Seebeck effect (SSE), is fully determined by the relaxation of the electrons in the metal layer and provides an estimate of the spin-mixing conductance of the GIG/Pt interface. Remarkably, in the half-metallic ferrimagnet Fe3O4 (magnetite), our measurements reveal two spin-current components with opposite direction. The slower, positive component exhibits SSE dynamics and is assigned to torque-type magnon excitation of the A- and B-spin sublattices of Fe3O4. The faster, negative component arises from the pyro-spintronic effect and can consistently be assigned to ultrafast demagnetization of e-sublattice minority-spin hop** electrons. This observation supports the magneto-electronic model of Fe3O4. In general, our results provide a new route to the contact-free separation of torque- and conduction-electron-mediated spin currents. △ Less

Submitted 20 November, 2021; v1 submitted 11 October, 2021; originally announced October 2021.

Journal ref: Phys. Rev. B 105, 184408 (2022)

Interface-induced anomalous Nernst effect in Fe3O4/Pt-based heterostructures

Authors: R. Ramos, T. Kikkawa, A. Anadón, I. Lucas, T. Niizeki, K. Uchida, P. A. Algarabel, L. Morellón, M. H. Aguirre, M. R. Ibarra, E. Saitoh

Abstract: We have studied the anomalous Nernst effect (ANE) in [Fe3O4/Pt]-based heterostructures, by measuring the ANE-induced electric field with a magnetic field applied normal to the sample surface, in the perpendicular magnetized configuration, where only the ANE is expected. An ANE voltage is observed for [Fe3O4/Pt]n multilayers, and we further investigated its origin by performing measurements in [Fe3… ▽ More We have studied the anomalous Nernst effect (ANE) in [Fe3O4/Pt]-based heterostructures, by measuring the ANE-induced electric field with a magnetic field applied normal to the sample surface, in the perpendicular magnetized configuration, where only the ANE is expected. An ANE voltage is observed for [Fe3O4/Pt]n multilayers, and we further investigated its origin by performing measurements in [Fe3O4/Pt/Fe3O4] trilayers as a function of the Pt thickness. Our results suggest the presence of an interface-induced ANE. Despite of this ANE, the spin Seebeck effect is the dominant mechanism for the transverse thermoelectric voltage in the in-plane magnetized configuration, accounting for about 70 % of the measured voltage in the multilayers. △ Less

Submitted 28 September, 2018; originally announced September 2018.

Comments: 15 pages, 4 figures

Large spin-mixing conductance in highly Bi-doped Cu thin films

Authors: Sandra Ruiz-Gómez, Aída Serrano, Rubén Guerrero, Manuel Muñoz, Irene Lucas, Michael Foerster, Lucia Aballe, José F. Marco, Mario Amado, Lauren McKenzie-Sell, Angelo di Bernardo, Jason W. A. Robinson, Miguel Angel González-Barrio, Arantzazu Mascaraque, Lucas Pérez

Abstract: Spin Hall effect provides an efficient tool for the conversion of a charge current into a spin current, opening the possibility of producing pure spin currents in non-magnetic materials for the next generation of spintronics devices. In this sense, giant Spin Hall Effect has been recently reported in Cu doped with 0.5 % Bi grown by sputtering and larger values are expected for larger Bi do**, ac… ▽ More Spin Hall effect provides an efficient tool for the conversion of a charge current into a spin current, opening the possibility of producing pure spin currents in non-magnetic materials for the next generation of spintronics devices. In this sense, giant Spin Hall Effect has been recently reported in Cu doped with 0.5 % Bi grown by sputtering and larger values are expected for larger Bi do**, according to first principles calculations. In this work we demonstrate the possibility of do** Cu with up to 10 % of Bi atoms without evidences of Bi surface segregation or cluster formation, as studied by different microscopic and spectroscopic techniques. In addition, YIG/BiCu structures have been grown, showing a spin mixing conductance larger that the one shown by similar Pt/YIG structures. These results reflects the potentiality of these new materials in spintronics devices. △ Less

Submitted 24 July, 2018; v1 submitted 4 June, 2018; originally announced June 2018.

Comments: 6 pages, 4 figures

Journal ref: APL Materials 6, 101107 (2018)

Terahertz spin currents and inverse spin Hall effect in thin-film heterostructures containing complex magnetic compounds

Authors: T. Seifert, U. Martens, S. Günther, M. A. W. Schoen, F. Radu, X. Z. Chen, I. Lucas, R. Ramos, M. H. Aguirre, P. A. Algarabel, A. Anadón, H. Körner, J. Walowski, C. Back, M. R. Ibarra, L. Morellón, E. Saitoh, M. Wolf, C. Song, K. Uchida, M. Münzenberg, I. Radu, T. Kampfrath

Abstract: Terahertz emission spectroscopy of ultrathin multilayers of magnetic and heavy metals has recently attracted much interest. This method not only provides fundamental insights into photoinduced spin transport and spin-orbit interaction at highest frequencies but has also paved the way to applications such as efficient and ultrabroadband emitters of terahertz electromagnetic radiation. So far, predo… ▽ More Terahertz emission spectroscopy of ultrathin multilayers of magnetic and heavy metals has recently attracted much interest. This method not only provides fundamental insights into photoinduced spin transport and spin-orbit interaction at highest frequencies but has also paved the way to applications such as efficient and ultrabroadband emitters of terahertz electromagnetic radiation. So far, predominantly standard ferromagnetic materials have been exploited. Here, by introducing a suitable figure of merit, we systematically compare the strength of terahertz emission from X/Pt bilayers with X being a complex ferro-, ferri- and antiferromagnetic metal, that is, dysprosium cobalt (DyCo$_5$), gadolinium iron (Gd$_{24}$Fe$_{76}$), Magnetite (Fe$_3$O$_4$) and iron rhodium (FeRh). We find that the performance in terms of spin-current generation not only depends on the spin polarization of the magnet's conduction electrons but also on the specific interface conditions, thereby suggesting terahertz emission spectroscopy to be a highly surface-sensitive technique. In general, our results are relevant for all applications that rely on the optical generation of ultrafast spin currents in spintronic metallic multilayers. △ Less

Submitted 14 July, 2021; v1 submitted 31 May, 2017; originally announced May 2017.

Journal ref: SPIN, Volume 07, Issue 03, September 2017

Thermoelectric performance of spin Seebeck effect in Fe3O4/Pt-based thin film heterostructures

Authors: R. Ramos, A. Anadon, I. Lucas, K. Uchida, P. A. Algarabel, L. Morellon, M. H. Aguirre, E. Saitoh, M. R. Ibarra

Abstract: We report a systematic study on the thermoelectric performance of spin Seebeck devices based on Fe3O4/Pt junction systems. We explore two types of device geometries: a spin Hall thermopile and spin Seebeck multilayer structures. The spin Hall thermopile increases the sensitivity of the spin Seebeck effect, while the increase in the sample internal resistance has a detrimental effect on the output… ▽ More We report a systematic study on the thermoelectric performance of spin Seebeck devices based on Fe3O4/Pt junction systems. We explore two types of device geometries: a spin Hall thermopile and spin Seebeck multilayer structures. The spin Hall thermopile increases the sensitivity of the spin Seebeck effect, while the increase in the sample internal resistance has a detrimental effect on the output power. We found that the spin Seebeck multilayers can overcome this limitation since the multilayers exhibit the enhancement of the thermoelectric voltage and the reduction of the internal resistance simultaneously, therefore resulting in significant power enhancement. This result demonstrates that the multilayer structures are useful for improving the thermoelectric performance of the spin Seebeck effect. △ Less

Submitted 12 May, 2016; originally announced May 2016.

Comments: This paper has been accepted in APL Materials, 15 pages, 4 figures

Journal ref: APL Mater. 4, 104802 (2016)

Observation of huge thermal spin currents in magnetic multilayers

Authors: R. Ramos, T. Kikkawa, M. H. Aguirre, I. Lucas, A. Anadón, T. Oyake, K. Uchida, H. Adachi, J. Shiomi, P. A. Algarabel, L. Morellón, S. Maekawa, E. Saitoh, M. R. Ibarra

Abstract: Thermal spin pum** constitutes a novel mechanism for generation of spin currents; however their weak intensity constitutes a major roadblock for its usefulness. We report a phenomenon that produces a huge spin current in the central region of a multilayer system, resulting in a giant spin Seebeck effect in a structure formed by repetition of ferromagnet/metal bilayers. The result is a consequenc… ▽ More Thermal spin pum** constitutes a novel mechanism for generation of spin currents; however their weak intensity constitutes a major roadblock for its usefulness. We report a phenomenon that produces a huge spin current in the central region of a multilayer system, resulting in a giant spin Seebeck effect in a structure formed by repetition of ferromagnet/metal bilayers. The result is a consequence of the interconversion of magnon and electron spin currents at the multiple interfaces. This work opens the possibility to design thin film heterostructures that may boost the application of thermal spin currents in spintronics. △ Less

Submitted 18 March, 2015; originally announced March 2015.

Journal ref: Phys. Rev. B 92, 220407 (2015)

Observation of the spin Seebeck effect in epitaxial Fe3O4 thin films

Authors: R. Ramos, T. Kikkawa, K. Uchida, H. Adachi, I. Lucas, M. H. Aguirre, P. Algarabel, L. Morellon, S. Maekawa, E. Saitoh, M. R. Ibarra

Abstract: We report the first experimental observation of the spin Seebeck effect in magnetite thin films. The signal observed at temperatures above the Verwey transition is a contribution from both the anomalous Nernst (ANE) and spin Seebeck effects (SSE). The contribution from the ANE of the Fe3O4 layer to the SSE is found to be negligible due to the resistivity difference between Fe3O4 and Pt layers. Bel… ▽ More We report the first experimental observation of the spin Seebeck effect in magnetite thin films. The signal observed at temperatures above the Verwey transition is a contribution from both the anomalous Nernst (ANE) and spin Seebeck effects (SSE). The contribution from the ANE of the Fe3O4 layer to the SSE is found to be negligible due to the resistivity difference between Fe3O4 and Pt layers. Below the Verwey transition the SSE is free from the ANE of the ferromagnetic layer and it is also found to dominate over the ANE due to magnetic proximity effect on the Pt layer. △ Less

Submitted 13 December, 2012; originally announced December 2012.

Comments: 13 pages, 3 figures

Journal ref: Appl. Phys. Lett. 102, 072413 (2013)

Resonance frequency dependence on out-of-plane forces for square silicon membranes: applications to a MEMS gradiometer

Authors: I. Lucas, R. P. del Real, M. D. Michelena, V. de Manuel, M. Duch, J. Esteve, J. A. Plaza

Abstract: The dynamic properties of membranes have been object of many researches since they can be used as sensor heads in different devices. Some methods have been proposed to solve the problem of determining the resonance frequencies and their dependence on the stress caused by forces applied on the membrane surface. The problem of the vibrating rectangular membrane under a stress caused by a uniform in-… ▽ More The dynamic properties of membranes have been object of many researches since they can be used as sensor heads in different devices. Some methods have been proposed to solve the problem of determining the resonance frequencies and their dependence on the stress caused by forces applied on the membrane surface. The problem of the vibrating rectangular membrane under a stress caused by a uniform in-plane force is well known. However, the resonance frequency behaviour when the force is out-of-plane instead of in-plane, is not so well understood and documented. A gradiometer which uses a silicon square membrane with a magnet fixed on it as a sensor head has been developed in a previous work. This device reports a quadratic dependence of the frequency on the out-of-plane magnetic force. In this work, simulations to obtain the dependence of the frequency of the fundamental flexural mode on the stress have been performed. It has been studied the influence of in-plane and out-of-plane forces applied to the membrane. As expected, a square root dependence has been found for in-plane forces. Nevertheless, the problem is more complex when out-of plane forces are considered. Out-of-plane forces gives rise to an initial quadratic dependence which turns into a square root dependence from a certain stress value. The quadratic range increases and the rate of change of the frequency decreases as the surface of the magnet fixed on the membrane increases. The study has addressed these problems and both, experimental and simulated results have been compared and a good agreement between experimental and simulated results has been found △ Less

Submitted 13 August, 2010; originally announced August 2010.

Comments: 14 pages, 10 figures

Journal ref: Sensors and Actuators A (2010)