-
On the depth of cylindrical indentation of an elastic half-space for two types of displacement constraints
Authors:
Vlado A. Lubarda,
Marko V. Lubarda
Abstract:
For cylindrical indentation of elastic half-space the relationship between the depth of indentation delta and the applied force F is nonlinear, in contrast to the linear relationship between the height of the contact zone delta_0 and the force F. While the latter is independent of the boundary conditions used to specify the rigid-body translation, the former depends on a selected datum for vertica…
▽ More
For cylindrical indentation of elastic half-space the relationship between the depth of indentation delta and the applied force F is nonlinear, in contrast to the linear relationship between the height of the contact zone delta_0 and the force F. While the latter is independent of the boundary conditions used to specify the rigid-body translation, the former depends on a selected datum for vertical displacement. The depth of the indentation is determined for any permissible value of the length b, which specifies the points of the free surface where the vertical displacement is required to be zero, w(b)=0. From the condition that the work of the indentation force is equal to the work of the contact pressure, it follows that the indentation is geometrically and physically possible under imposed boundary conditions w(b)=0 provided that b>=b_min. The numerical value of b_min is found to be about 10 times greater than the semi-width of the contact zone a, based on the numerical precision in fulfilling the work condition W_F=W_p. If a datum is taken to be at a point at some distance h below the load, there is an alternative closed-form expression for delta in terms of F, which involves the Poisson ratio nu. For nu=1/3, it is found that h_min is about 21a. A simple expression relating the permissible values of h and b is derived, which is linear for large values of h and b.
△ Less
Submitted 5 September, 2023;
originally announced September 2023.
-
On the motion of an evaporating respiratory droplet
Authors:
Marko V. Lubarda,
Vlado A. Lubarda
Abstract:
An analysis of the projectile motion in stagnant air is presented for an evaporating respiratory micro-droplet which has been ejected from the mouth as an isolated droplet. It is assumed that the air resistance is a nonlinear function of the droplet's velocity and that the rate of decrease of the droplet's external surface area depends only on the relative humidity and the ambient temperature. The…
▽ More
An analysis of the projectile motion in stagnant air is presented for an evaporating respiratory micro-droplet which has been ejected from the mouth as an isolated droplet. It is assumed that the air resistance is a nonlinear function of the droplet's velocity and that the rate of decrease of the droplet's external surface area depends only on the relative humidity and the ambient temperature. The droplet's initial content is considered to be 98 wt% water, 1 wt% salt and 1 wt% protein. The change of the average density of the droplet due to water evaporation is determined, up to the instant when the droplet reduces to its nucleus, consisting of salt and dry protein only. The numerical solution of the governing differential equations of droplet's motion gives the trajectories of different-sized droplets ejected at different velocities and angles, and under different relative humidities and rates of evaporation. The evaporation times are compared with the times for droplets to reach the ground after being ejected from a given height. The maximum horizontal and vertical distances reached by the droplet are evaluated in the presence of wind and discussed in the context of possible infection spreading.
△ Less
Submitted 19 May, 2021;
originally announced May 2021.
-
Periodic chiral magnetic domains in single-crystal nickel nanowires
Authors:
Jimmy J. Kan,
Marko V. Lubarda,
Keith T. Chan,
Vojtech Uhlir,
Andreas Scholl,
Vitaliy Lomakin,
Eric E. Fullerton
Abstract:
We report on experimental and computational investigations of the domain structure of ~0.2 x 0.2 x 8 μm single-crystal Ni nanowires (NWs). The Ni NWs were grown by a thermal chemical vapor deposition technique that results in highly-oriented single-crystal structures on amorphous SiOx coated Si substrates. Magnetoresistance measurements of the Ni NWs suggest the average magnetization points largel…
▽ More
We report on experimental and computational investigations of the domain structure of ~0.2 x 0.2 x 8 μm single-crystal Ni nanowires (NWs). The Ni NWs were grown by a thermal chemical vapor deposition technique that results in highly-oriented single-crystal structures on amorphous SiOx coated Si substrates. Magnetoresistance measurements of the Ni NWs suggest the average magnetization points largely off the NW long axis at zero field. X-ray photoemission electron microscopy images show a well-defined periodic magnetization pattern along the surface of the nanowires with a period of λ = 250 nm. Finite element micromagnetic simulations reveal that an oscillatory magnetization configuration with a period closely matching experimental observation (λ = 240 nm) is obtainable at remanence. This magnetization configuration involves a periodic array of alternating chirality vortex domains distributed along the length of the NW. Vortex formation is attributable to the cubic anisotropy of the single crystal Ni NW system and its reduced structural dimensions. The periodic alternating chirality vortex state is a topologically protected metastable state, analogous to an array of 360° domain walls in a thin strip. Simulations show that other remanent states are also possible, depending on the field history. Effects of material properties and strain on the vortex pattern are investigated. It is shown that at reduced cubic anisotropy vortices are no longer stable, while negative uniaxial anisotropy and magnetoelastic effects in the presence of compressive biaxial strain contribute to vortex formation.
△ Less
Submitted 9 December, 2017;
originally announced December 2017.
-
Large exchange-dominated domain wall velocities in antiferromagnetically coupled nanowires
Authors:
M. Kuteifan,
M. V. Lubarda,
S. Fu,
R. Chang,
M. A. Escobar,
S. Mangin,
E. E. Fullerton,
V. Lomakin
Abstract:
Magnetic nanowires supporting field- and current-driven domain wall motion are envisioned for new methods of information storage and processing. A major obstacle for their practical use is the domainwall velocity, which is traditionally limited due to the Walker breakdown occurring when the forcing field or current reaches a critical threshold value. We show through numerical and analytical modeli…
▽ More
Magnetic nanowires supporting field- and current-driven domain wall motion are envisioned for new methods of information storage and processing. A major obstacle for their practical use is the domainwall velocity, which is traditionally limited due to the Walker breakdown occurring when the forcing field or current reaches a critical threshold value. We show through numerical and analytical modeling that the Walker breakdown limit can be extended or completely eliminated in antiferromagnetically coupled magnetic nanowires. These coupled nanowires allow for giant domain-wall velocities driven by field and/or current via spin transfer torque as compared to conventional nanowires.
△ Less
Submitted 12 June, 2014;
originally announced June 2014.
