-
An improved continuous compositional-spread technique based on pulsed-laser deposition and applicable to large substrate areas
Authors:
H. M. Christen,
C. M. Rouleau,
I. Ohkubo,
H. Y. Zhai,
H. N. Lee,
S. Sathyamurthy,
D. H. Lowndes
Abstract:
A new method for continuous compositional-spread (CCS) thin-film fabrication based on pulsed-laser deposition (PLD) is introduced. This approach is based on a translation of the substrate heater and the synchronized firing of the excimer laser, with the deposition occurring through a slit-shaped aperture. Alloying is achieved during film growth (possible at elevated temperature) by the repeated…
▽ More
A new method for continuous compositional-spread (CCS) thin-film fabrication based on pulsed-laser deposition (PLD) is introduced. This approach is based on a translation of the substrate heater and the synchronized firing of the excimer laser, with the deposition occurring through a slit-shaped aperture. Alloying is achieved during film growth (possible at elevated temperature) by the repeated sequential deposition of sub-monolayer amounts. Our approach overcomes serious shortcomings in previous in-situ implementations of CCS based on sputtering or PLD, in particular the variations of thickness across the compositional spread and the differing deposition energetics as function of position. While moving-shutter techniques are appropriate for PLD-approaches yielding complete spreads on small substrates (i.e. small as compared to distances over which the deposition parameters in PLD vary, typically about 1 cm), our method can be used to fabricate samples that are large enough for individual compositions to be analyzed by conventional techniques, including temperature-dependent measurements of resistivity and dielectric and magnetic and properties (i.e. SQUID magnetometry). Initial results are shown for spreads of (Sr,Ca)RuO$_3$.
△ Less
Submitted 17 June, 2003;
originally announced June 2003.
-
Effective Vortex Pinning in MgB2 thin films
Authors:
Y. Bugoslavsky,
L. Cowey,
T. J. Tate,
G. K. Perkins,
J. Moore,
Z. Lockman,
A. Berenov,
J. L. MacManus-Driscoll,
A. D. Caplin,
L. F. Cohen,
H Y Zhai,
H M Christen,
M P Paranthaman,
D H Lowndes,
M H Jo,
M G Blamire
Abstract:
We discuss pinning properties of MgB2 thin films grown by pulsed-laser deposition (PLD) and by electron-beam (EB) evaporation. Two mechanisms are identified that contribute most effectively to the pinning of vortices in randomly oriented films. The EB process produces low defected crystallites with small grain size providing enhanced pinning at grain boundaries without degradation of Tc. The PLD…
▽ More
We discuss pinning properties of MgB2 thin films grown by pulsed-laser deposition (PLD) and by electron-beam (EB) evaporation. Two mechanisms are identified that contribute most effectively to the pinning of vortices in randomly oriented films. The EB process produces low defected crystallites with small grain size providing enhanced pinning at grain boundaries without degradation of Tc. The PLD process produces films with structural disorder on a scale less that the coherence length that further improves pinning, but also depresses Tc.
△ Less
Submitted 2 July, 2002;
originally announced July 2002.
-
Microwave Power, DC Magnetic Field, Frequency and Temperature Dependence of the Surface Resistance of MgB2
Authors:
A. A. Zhukov,
A. Purnell,
Y. Miyoshi,
Y. Bugoslavsky,
Z. Lockman,
A. Berenov,
J. L. MacManus-Driscoll,
L. F. Cohen,
H. Y. Zhai,
H. M. Christen,
M. P. Paranthaman,
D. H. Lowndes,
M. H. Jo,
M. G. Blamire,
Ling Hao,
J. C. Gallop
Abstract:
The microwave power, dc magnetic field, frequency and temperature dependence of the surface resistance of MgB2 films and powder samples were studied. Sample quality is relatively easy to identify by a number of characteristics, the most clear being the breakdown in the omega squared law for poor quality samples. Analysis of the experimental data suggests the most attractive procedure for high qu…
▽ More
The microwave power, dc magnetic field, frequency and temperature dependence of the surface resistance of MgB2 films and powder samples were studied. Sample quality is relatively easy to identify by a number of characteristics, the most clear being the breakdown in the omega squared law for poor quality samples. Analysis of the experimental data suggests the most attractive procedure for high quality film growth for technical applications.
△ Less
Submitted 21 September, 2001;
originally announced September 2001.
-
Temperature dependence of the microwave surface impedance measured on different kinds of MgB$_2$ samples
Authors:
A. A. Zhukov,
L. F. Cohen,
A. Purnell,
Y. Bugoslavsky,
A. Berenov,
J. L. MacManus-Driscoll,
H. Y Zhai,
Hans M. Christen,
Mariappan P. Paranthaman,
Douglas H. Lowndes,
M. A. Jo,
M. C. Blamire,
Ling Hao,
J. Gallop
Abstract:
In this paper we present the results of measurements of the microwave surface impedance of a powder sample and two films of MgB$_2$. One film has $T_c=30$ K and is not textured, the other is partially c-axis orientated with $T_c=38$ K. These samples show different types of temperature dependence of the field penetration depth: linear for the powder sample, exponential with $Δ/kT_c<1.76$ (film wi…
▽ More
In this paper we present the results of measurements of the microwave surface impedance of a powder sample and two films of MgB$_2$. One film has $T_c=30$ K and is not textured, the other is partially c-axis orientated with $T_c=38$ K. These samples show different types of temperature dependence of the field penetration depth: linear for the powder sample, exponential with $Δ/kT_c<1.76$ (film with $T_c=30$ K) and strong coupling behaviour with $Δ/kT_c\sim 2.25$ (film with $T_c=38$ K). The results are well described in terms of an anisotropic gap model or presence of a slightly deficient MgB$_2$ phase. The data set for all samples - taken as a whole cannot be fitted into a two gap scenario.
△ Less
Submitted 15 July, 2001; v1 submitted 11 July, 2001;
originally announced July 2001.
-
Far-infrared optical conductivity gap in superconducting MgB2 films
Authors:
R. A. Kaindl,
M. A. Carnahan,
J. Orenstein,
D. S. Chemla,
H. M. Christen,
H. Zhai,
M. Paranthaman,
D. H. Lowndes
Abstract:
We report the first study of the optical conductivity of MgB2 covering the range of its superconducting energy gap. Terahertz time-domain spectroscopy is utilized to determine the complex, frequency-dependent conductivity of thin films. The imaginary part reveals an inductive reponse due to the emergence of the superconducting condensate. The real part exhibits a strong depletion of oscillator s…
▽ More
We report the first study of the optical conductivity of MgB2 covering the range of its superconducting energy gap. Terahertz time-domain spectroscopy is utilized to determine the complex, frequency-dependent conductivity of thin films. The imaginary part reveals an inductive reponse due to the emergence of the superconducting condensate. The real part exhibits a strong depletion of oscillator strength near 5 meV resulting from the opening of a superconducting energy gap. The gap ratio of 2Delta/kTc = 1.9 is well below the weak-coupling value, pointing to complex behavior in this novel superconductor
△ Less
Submitted 18 June, 2001;
originally announced June 2001.
-
Degradation of superconducting properties in MgB2 films by exposure to water
Authors:
H Y Zhai,
H M Christen,
L Zhang,
M Paranthaman,
P H Fleming,
D H Lowndes
Abstract:
The effect of water exposure on MgB2 is studied by submerging an 800 nm thick MgB2 film into deionized water at room temperature for 1 hour, 4 hours, 10 hours, and 15 hours, and by analyzing the resulting material using scanning electron microscopy and resistance vs. temperature measurements. It is clearly observed that Tconset of these films (obtained by an ex-situ reaction of a e-beam evaporat…
▽ More
The effect of water exposure on MgB2 is studied by submerging an 800 nm thick MgB2 film into deionized water at room temperature for 1 hour, 4 hours, 10 hours, and 15 hours, and by analyzing the resulting material using scanning electron microscopy and resistance vs. temperature measurements. It is clearly observed that Tconset of these films (obtained by an ex-situ reaction of a e-beam evaporated boron layer) remains unchanged throughout this process, indicating that at least a portion of the sample retains its original bulk-like properties. The data is consistent with an interpretation in which a portion of the exposed film - likely the region closest to the substrate - becomes superconducting only at about 25 K. It is possible that this low-Tc region already exists in the as-prepared film, and we observe that its Tc coincides with that of MgB2 films obtained by annealing precursor films prepared by pulsed laser deposition. Therefore the data presented here not only illustrate the degradation of MgB2 in water but also shed light onto the differences and similarities between films obtained via different routes.
△ Less
Submitted 17 April, 2001;
originally announced April 2001.
-
Growth mechanism of superconducting MgB2 films prepared by various methods
Authors:
H. Y. Zhai,
H. M. Christen,
L. Zhang,
M. Paranthaman,
C. Cantoni,
B. C. Sales,
P. H. Fleming,
D. K. Christen,
D. H. Lowndes
Abstract:
The growth mechanisms of MgB2 films obtained by different methods on various substrates are compared via a detailed cross-sectional scanning electron microscopy (SEM) study. The analyzed films include (a) samples obtained by an ex-situ post-anneal at 900 degree of e-beam evaporated boron in the presence of an Mg vapor (exhibiting bulk-like Tc0 about 38.8 K), (b) samples obtained by the same ex-s…
▽ More
The growth mechanisms of MgB2 films obtained by different methods on various substrates are compared via a detailed cross-sectional scanning electron microscopy (SEM) study. The analyzed films include (a) samples obtained by an ex-situ post-anneal at 900 degree of e-beam evaporated boron in the presence of an Mg vapor (exhibiting bulk-like Tc0 about 38.8 K), (b) samples obtained by the same ex-situ 900 degree anneal of pulsed laser deposition (PLD)-grown Mg+B precursors (exhibiting Tc0 ~ 25 K), and (c) films obtained by a low-temperature (600 - 630 degree) in-situ anneal of PLD-grown Mg+B precursors (with Tc0 about 24 K). A significant oxygen contamination was also present in films obtained from a PLD-grown precursors. On the other hand, it is clearly observed that the films obtained by the high-temperature reaction of e-beam evaporated B with Mg vapor are formed by the nucleation of independent MgB2 grains at the film surface, indicating that this approach may not be suitable to obtain smooth and (possibly) epitaxial films.
△ Less
Submitted 17 April, 2001; v1 submitted 29 March, 2001;
originally announced March 2001.
-
Superconducting magnesium diboride films on Silicon with Tc0 about 24K grown via vacuum annealing from stoichiometric precursors
Authors:
H. Y. Zhai,
H. M. Christen,
L. Zhang,
C. Cantoni,
M. Paranthaman,
B. C. Sales,
D. K. Christen,
D. H. Lowndes
Abstract:
Superconducting magnesium diboride films with Tc0 ~ 24 K and sharp transition \~ 1 K were successfully prepared on silicon substrates by pulsed laser deposition from a stoichiometric MgB2 target. Contrary to previous reports, anneals at 630 degree and a background of 2x10^(-4) torr Ar/4%H2 were performed without the requirement of Mg vapor or an Mg cap layer. This integration of superconducting…
▽ More
Superconducting magnesium diboride films with Tc0 ~ 24 K and sharp transition \~ 1 K were successfully prepared on silicon substrates by pulsed laser deposition from a stoichiometric MgB2 target. Contrary to previous reports, anneals at 630 degree and a background of 2x10^(-4) torr Ar/4%H2 were performed without the requirement of Mg vapor or an Mg cap layer. This integration of superconducting MgB2 films on silicon may thus prove enabling in superconductor-semiconductor device applications. Images of surface morphology and cross-section profiles by scanning electron microscopy (SEM) show that the films have a uniform surface morphology and thickness. Energy dispersive spectroscopy (EDS) reveals these films were contaminated with oxygen, originating either from the growth environment or from sample exposure to air. The oxygen contamination may account for the low Tc for those in-situ annealed films, while the use of Si as the substrate does not result in a decrease in Tc as compared to other substrates.
△ Less
Submitted 31 March, 2001; v1 submitted 28 March, 2001;
originally announced March 2001.
-
Superconducting MgB(2) films via precursor post-processing approach
Authors:
M. Paranthaman,
C. Cantoni,
H. Y. Zhai,
H. M. Christen,
T. Aytug,
S. Sathyamurthy,
E. D. Specht,
J. R. Thompson,
D. H. Lowndes,
H. R. Kerchner,
D. K. Christen
Abstract:
Superconducting MgB(2) films with Tc = 38.6 K were prepared using a precursor-deposition, ex-situ post-processing approach. Precursor films of boron, ~0.5 micrometer thick, were deposited onto Al(2)O(3) (102) substrates by e-beam evaporation; a post-anneal at 890 deg C in the presence of bulk MgB(2) and Mg metal produced highly crystalline MgB(2) films. X-ray diffraction indicated that the films…
▽ More
Superconducting MgB(2) films with Tc = 38.6 K were prepared using a precursor-deposition, ex-situ post-processing approach. Precursor films of boron, ~0.5 micrometer thick, were deposited onto Al(2)O(3) (102) substrates by e-beam evaporation; a post-anneal at 890 deg C in the presence of bulk MgB(2) and Mg metal produced highly crystalline MgB(2) films. X-ray diffraction indicated that the films exhibit some degree of c-axis alignment, but are randomly oriented in-plane. Transport current measurements of the superconducting properties show high values of the critical current density and yield an irreversibility line that exceeds that determined by magnetic measurements on bulk polycrystalline materials.
△ Less
Submitted 27 March, 2001;
originally announced March 2001.
-
Superconducting magnesium diboride films with Tc \approx 24K grown by pulsed laser deposition with in-situ anneal
Authors:
H. M. Christen,
H. Y. Zhai,
C. Cantoni,
M. Paranthaman,
B. C. Sales,
C. Rouleau,
D. P. Norton,
D. K. Christen,
D. H. Lowndes,
.
Abstract:
Thin superconducting films of magnesium diboride (MgB2) with Tc \approx 24K were prepared on various oxide substrates by pulsed laser deposition (PLD) followed by an in-situ anneal. A systematic study of the influence of various in-situ annealing parameters shows an optimum temperature of about 600C in a background of 0.7 atm. of Ar/4%H2 for layers consisting of a mixture of magnesium and boron.…
▽ More
Thin superconducting films of magnesium diboride (MgB2) with Tc \approx 24K were prepared on various oxide substrates by pulsed laser deposition (PLD) followed by an in-situ anneal. A systematic study of the influence of various in-situ annealing parameters shows an optimum temperature of about 600C in a background of 0.7 atm. of Ar/4%H2 for layers consisting of a mixture of magnesium and boron. Contrary to ex-situ approaches (e.g. reacting boron films with magnesium vapor at 900C), these films are processed below the decomposition temperature of MgB2. This may prove enabling in the formation of multilayers, junctions, and epitaxial films in future work. Issues related to the improvement of these films and to the possible in-situ growth of MgB2 at elevated temperature are discussed.
△ Less
Submitted 22 March, 2001;
originally announced March 2001.