Showing 1–50 of 239 results for author: Low, T

Moiré polar vortex, flat bands and Lieb lattice in twisted bilayer BaTiO$_3$

Authors: Seungjun Lee, D. J. P. de Sousa, Bharat Jalan, Tony Low

Abstract: Advances in material fabrication techniques and growth methods have opened up a new chapter for twistronics, in the form of twisted freestanding three-dimensional material membranes. Through first-principles calculations based on density functional theory, we investigate the crystal and electronic structures of twisted bilayer BaTiO$_3$. Our findings reveal that large stacking fault energy leads t… ▽ More Advances in material fabrication techniques and growth methods have opened up a new chapter for twistronics, in the form of twisted freestanding three-dimensional material membranes. Through first-principles calculations based on density functional theory, we investigate the crystal and electronic structures of twisted bilayer BaTiO$_3$. Our findings reveal that large stacking fault energy leads to chiral in-plane vortex pattern that was recently observed in experiments. Moreover, we also found non-zero out-of-plane local dipole moments, indicating that the strong interlayer interaction might offer promising strategy to stabilize ferroelectric order in the two-dimensional limit. Remarkably, the vortex pattern in the twisted BaTiO$_3$ bilayer support localized electronic states with quasi-flat bands, associated with the interlayer hybridization of oxygen $p_z$ orbitals. We found that the associated band width reaches a minimum at $\sim$19$^{\circ}$ twisting, configuring the largest magic angle in moiré systems reported so far. Further, the moiré vortex pattern bears a striking resemblance to two interpenetrating Lieb lattices and corresponding tight-binding model provides a comprehensive description of the evolution the moiré bands with twist angle and reveals the topological nature of these states. △ Less

Submitted 9 May, 2024; originally announced May 2024.

Comments: 8 pages, 5 figures

Tactile Ergodic Control Using Diffusion and Geometric Algebra

Authors: Cem Bilaloglu, Tobias Löw, Sylvain Calinon

Abstract: Continuous physical interaction between robots and their environment is a requirement in many industrial and household tasks, such as sanding and cleaning. Due to the complex tactile information, these tasks are notoriously difficult to model and to sense. In this article, we introduce a closed-loop control method that is constrained to surfaces. The applications that we target have in common that… ▽ More Continuous physical interaction between robots and their environment is a requirement in many industrial and household tasks, such as sanding and cleaning. Due to the complex tactile information, these tasks are notoriously difficult to model and to sense. In this article, we introduce a closed-loop control method that is constrained to surfaces. The applications that we target have in common that they can be represented by probability distributions on the surface that correlate to the time the robot should spend in a region. These surfaces can easily be captured jointly with the target distributions using coloured point clouds. We present the extension of an ergodic control approach that can be used with point clouds, based on heat equation-driven area coverage (HEDAC). Our method enables closed-loop exploration by measuring the actual coverage using vision. Unlike existing approaches, we approximate the potential field from non-stationary diffusion using spectral acceleration, which does not require complex preprocessing steps and achieves real-time closed-loop control frequencies. We exploit geometric algebra to stay in contact with the target surface by tracking a line while simultaneously exerting a desired force along that line. Our approach is suitable for fully autonomous and human-robot interaction settings where the robot can either directly measure the coverage of the target with its sensors or by being guided online by markings or annotations of a human expert. We tested the performance of the approach in kinematic simulation using point clouds, ranging from the Stanford bunny to a variety of kitchen utensils. Our real-world experiments demonstrate that the proposed approach can successfully be used to wash kitchenware with curved surfaces, by cleaning the dirt detected by vision in an online manner. Website: https://geometric-algebra.tobiloew.ch/tactile_ergodic_control △ Less

Submitted 7 February, 2024; originally announced February 2024.

Comments: Submitted to the special issue for IEEE Transactions on Robotics (T-RO) on Tactile Robotics

Giant piezoelectricity in group IV monochalcogenides with ferroelectric AA layer stacking

Authors: Seungjun Lee, Hyeong-Ryul Kim, Wei Jiang, Young-Kyun Kwon, Tony Low

Abstract: The piezoelectricity of group IV monochalcogenides (MXs, with M = Ge, Sn and X = S, Se) has attracted much attention due to their substantially higher piezoelectric coefficients compared to other 2D materials. However, with increasing layer number, their piezoelectricity rapidly disappears due to the antiferroelectric stacking order, severely limiting their practical applications. Using first-prin… ▽ More The piezoelectricity of group IV monochalcogenides (MXs, with M = Ge, Sn and X = S, Se) has attracted much attention due to their substantially higher piezoelectric coefficients compared to other 2D materials. However, with increasing layer number, their piezoelectricity rapidly disappears due to the antiferroelectric stacking order, severely limiting their practical applications. Using first-principles calculations, we investigated the piezoelectricity of MXs with the ferroelectric AA stacking configuration, which has recently been stabilized in experiments. We found that AA-stacked MXs have a ferroelectric ground state with the smallest lattice constant among other stacking configurations, resulting in a giant piezoelectric coefficient, which is the first demonstration of a strategy where the piezoelectric coefficients can increase with the number of layers. This can be attributed to a strong negative correlation between the lattice constant along the armchair direction and the piezoelectric coefficient, and spontaneous compressive strain stabilized in ferroelectric AA stacking configuration. △ Less

Submitted 6 February, 2024; originally announced February 2024.

Comments: 16 pages and 5 figures for main manuscript. 9pages and 3 figures for SI

Alternate cleavage structure and electronic inhomogeneity in Ca-doped YBa$_2$Cu$_3$O$_{7-δ}$

Authors: Larissa B. Little, Jennifer Coulter, Ruizhe Kang, Ilija Zeljkovic, Dennis Huang, Can-Li Song, Toshinao Loew, Han-Jong Chia, Jason D. Hoffman, John T. Markert, Bernhard Keimer, Boris Kozinsky, Jennifer E. Hoffman

Abstract: YBa$_2$Cu$_3$O$_{7-δ}$ (YBCO) has favorable macroscopic superconducting properties of $T_\mathrm{c}$ up to 93 K and $H_{c2}$ up to 150 T. However, its nanoscale electronic structure remains mysterious because bulk-like electronic properties are not preserved near the surface of cleaved samples for easy access by local or surface-sensitive probes. It has been hypothesized that Ca-do** at the Y si… ▽ More YBa$_2$Cu$_3$O$_{7-δ}$ (YBCO) has favorable macroscopic superconducting properties of $T_\mathrm{c}$ up to 93 K and $H_{c2}$ up to 150 T. However, its nanoscale electronic structure remains mysterious because bulk-like electronic properties are not preserved near the surface of cleaved samples for easy access by local or surface-sensitive probes. It has been hypothesized that Ca-do** at the Y site could induce an alternate cleavage plane that mitigates this issue. We use scanning tunneling microscopy (STM) to study both Ca-free and 10% Ca-doped YBCO, and find that the Ca-doped samples do indeed cleave on an alternate plane, yielding a spatially-disordered partial (Y,Ca) layer. Our density functional theory calculations support the increased likelihood of this new cleavage plane in Ca-doped YBCO. On this surface, we image a superconducting gap with average value 24 $\pm$ 3 meV and characteristic length scale 1-2 nm, similar to Bi-based high-$T_\mathrm{c}$ cuprates, but the first map of gap inhomogeneity in the YBCO family. △ Less

Submitted 7 February, 2024; v1 submitted 5 February, 2024; originally announced February 2024.

Comments: corrected typo in metadata author name

Deconstructing the spin susceptibility of a cuprate superconductor

Authors: R. Zhou, I. Vinograd, M. Hirata, T. Wu, H. Mayaffre, S. Krämer, W. N. Hardy, R. Liang, D. A. Bonn, T. Loew, J. Porras, B. Keimer, M. -H. Julien

Abstract: A major obstacle to understanding high-Tc cuprates is that superconductivity precludes observing normal-state properties at low temperatures. One prime example is the normal-state spin susceptibility: although its decrease upon cooling far above Tc typifies pseudogap behavior, its behavior at low temperatures is generally unknown. Here, our measurements in high magnetic fields expose the spin susc… ▽ More A major obstacle to understanding high-Tc cuprates is that superconductivity precludes observing normal-state properties at low temperatures. One prime example is the normal-state spin susceptibility: although its decrease upon cooling far above Tc typifies pseudogap behavior, its behavior at low temperatures is generally unknown. Here, our measurements in high magnetic fields expose the spin susceptibility of YBa2Cu3Oy down to low temperatures. Even though superconductivity is suppressed by the field, we uncover two thermally-activated contributions alongside a residual susceptibility at T=0 due to gapless excitations. We relate these two distinct gaps to short-range charge-density waves and to the formation of spin singlets similar to those found in certain quantum spin systems. These phenomena thus collectively contribute to the pseudogap in the spin susceptibility at low temperature, supplementing short-lived antiferromagnetism known to initiate pseudogap behavior at high temperatures. We therefore propose that the pseudogap should be regarded as a composite property. △ Less

Submitted 4 February, 2024; originally announced February 2024.

Control of charge-spin interconversion in van der Waals heterostructures with chiral charge density waves

Authors: Zhendong Chi, Seungjun Lee, Haozhe Yang, Eoin Dolan, C. K. Safeer, Josep Ingla-Aynés, Franz Herling, Nerea Ontoso, Beatriz Martín-García, Marco Gobbi, Tony Low, Luis E. Hueso, Fèlix Casanova

Abstract: A charge density wave (CDW) represents an exotic state in which electrons are arranged in a long range ordered pattern in low-dimensional materials. Although our understanding of the fundamental character of CDW has been enriched after extensive studies, its relationship with functional phenomena remains relatively limited. Here, we show an unprecedented demonstration of a tunable charge-spin inte… ▽ More A charge density wave (CDW) represents an exotic state in which electrons are arranged in a long range ordered pattern in low-dimensional materials. Although our understanding of the fundamental character of CDW has been enriched after extensive studies, its relationship with functional phenomena remains relatively limited. Here, we show an unprecedented demonstration of a tunable charge-spin interconversion (CSI) in graphene/1T-TaS$_2$ van der Waals heterostructures by manipulating the distinct CDW phases in 1T-TaS$_2$. Whereas CSI from spins polarized in all three directions are observed in the heterostructure when the CDW phase does not show commensurability, the output of one of the components disappears and the other two are enhanced when the CDW phase becomes commensurate. The experimental observation is supported by first-principles calculations, which evidence that chiral CDW multidomains are at the origin of the switching of CSI. Our results uncover a new approach for on-demand CSI in low-dimensional systems, paving the way for advanced spin-orbitronic devices. △ Less

Submitted 24 June, 2024; v1 submitted 16 January, 2024; originally announced January 2024.

Comments: Funding information: Marie Sklodowska-Curie Actions, H2020-MSCA-ITN-2020; Project Acronym SPEAR; Grant Agreement No. 955671

Ferroelectric Semimetals with $α$-Bi/SnSe van der Waals heterostructures and its Topological Currents

Authors: D. J. P. de Sousa, Seungjun Lee, Qiangsheng Lu, Rob G. Moore, Matthew Brahlek, J-. P. Wang, Guang Bian, Tony Low

Abstract: We show that proximity effects can be utilized to engineer van der Waals heterostructures (vd- WHs) displaying spin-ferroelectricity locking, where ferroelectricity and spin states are confined to different layers, but are correlated by means of proximity effects. Our findings are supported by first principles calculations in $α$-Bi/SnSe bilayers. We show that such systems support ferroelectricall… ▽ More We show that proximity effects can be utilized to engineer van der Waals heterostructures (vd- WHs) displaying spin-ferroelectricity locking, where ferroelectricity and spin states are confined to different layers, but are correlated by means of proximity effects. Our findings are supported by first principles calculations in $α$-Bi/SnSe bilayers. We show that such systems support ferroelectrically switchable non-linear anomalous Hall effect originating from large Berry curvature dipoles as well as direct and inverse spin Hall effects with giant bulk spin-charge interconversion efficiencies. The giant efficiencies are consequences of the proximity-induced semimetallic nature of low energy electron states, which are shown to behave as two-dimensional pseudo-Weyl fermions by means of symmetry analysis, first principles calculations as well as direct angle-resolved photoemission spectroscopy measurements. △ Less

Submitted 29 November, 2023; originally announced November 2023.

Plasmon dispersion in bilayer cuprate superconductors

Authors: M. Bejas, V. Zimmermann, D. Betto, T. D. Boyko, R. J. Green, T. Loew, N. B. Brookes, G. Cristiani, G. Logvenov, M. Minola, B. Keimer, H. Yamase, A. Greco, M. Hepting

Abstract: The essential building blocks of cuprate superconductors are two-dimensional CuO$_2$ sheets interspersed with charge reservoir layers. In bilayer cuprates, two closely spaced CuO$_2$ sheets are separated by a larger distance from the subsequent pair in the next unit cell. In contrast to single-layer cuprates, prior theoretical work on bilayer systems has predicted two distinct acoustic plasmon ban… ▽ More The essential building blocks of cuprate superconductors are two-dimensional CuO$_2$ sheets interspersed with charge reservoir layers. In bilayer cuprates, two closely spaced CuO$_2$ sheets are separated by a larger distance from the subsequent pair in the next unit cell. In contrast to single-layer cuprates, prior theoretical work on bilayer systems has predicted two distinct acoustic plasmon bands for a given out-of-plane momentum transfer. Here we report random phase approximation (RPA) calculations for bilayer systems which corroborate the existence of two distinct plasmons bands. We find that the intensity of the lower-energy band is negligibly small, whereas the higher-energy band carries significant spectral weight. We also present resonant inelastic x-ray scattering (RIXS) experiments at the O $K$-edge on the bilayer cuprate Y$_{0.85}$Ca$_{0.15}$Ba$_2$Cu$_3$O$_7$ (Ca-YBCO), which show only one dispersive plasmon branch, in agreement with the RPA calculations. In addition, the RPA results indicate that the dispersion of the higher-energy plasmon band in Ca-YBCO is not strictly acoustic, but exhibits a substantial energy gap of approximately 250 meV at the two-dimensional Brillouin zone center. △ Less

Submitted 13 May, 2024; v1 submitted 2 November, 2023; originally announced November 2023.

Comments: 9 pages, 7 figures

Journal ref: Phys. Rev. B 109, 144516 (2024)

Extending the Cooperative Dual-Task Space in Conformal Geometric Algebra

Authors: Tobias Löw, Sylvain Calinon

Abstract: In this work, we are presenting an extension of the cooperative dual-task space (CDTS) in conformal geometric algebra. The CDTS was first defined using dual quaternion algebra and is a well established framework for the simplified definition of tasks using two manipulators. By integrating conformal geometric algebra, we aim to further enhance the geometric expressiveness and thus simplify the mode… ▽ More In this work, we are presenting an extension of the cooperative dual-task space (CDTS) in conformal geometric algebra. The CDTS was first defined using dual quaternion algebra and is a well established framework for the simplified definition of tasks using two manipulators. By integrating conformal geometric algebra, we aim to further enhance the geometric expressiveness and thus simplify the modeling of various tasks. We show this formulation by first presenting the CDTS and then its extension that is based around a cooperative pointpair. This extension keeps all the benefits of the original formulation that is based on dual quaternions, but adds more tools for geometric modeling of the dual-arm tasks. We also present how this CGA-CDTS can be seamlessly integrated with an optimal control framework in geometric algebra that was derived in previous work. In the experiments, we demonstrate how to model different objectives and constraints using the CGA-CDTS. Using a setup of two Franka Emika robots we then show the effectiveness of our approach using model predictive control in real world experiments. △ Less

Submitted 29 October, 2023; originally announced October 2023.

gafro: Geometric Algebra for Robotics

Authors: Tobias Löw, Philip Abbet, Sylvain Calinon

Abstract: Geometry is a fundamental part of robotics and there have been various frameworks of representation over the years. Recently, geometric algebra has gained attention for its property of unifying many of those previous ideas into one algebra. While there are already efficient open-source implementations of geometric algebra available, none of them is targeted at robotics applications. We want to add… ▽ More Geometry is a fundamental part of robotics and there have been various frameworks of representation over the years. Recently, geometric algebra has gained attention for its property of unifying many of those previous ideas into one algebra. While there are already efficient open-source implementations of geometric algebra available, none of them is targeted at robotics applications. We want to address this shortcoming with our library gafro. This article presents an overview of the implementation details as well as a tutorial of gafro, an efficient c++ library targeting robotics applications using geometric algebra. The library focuses on using conformal geometric algebra. Hence, various geometric primitives are available for computation as well as rigid body transformations. The modeling of robotic systems is also an important aspect of the library. It implements various algorithms for calculating the kinematics and dynamics of such systems as well as objectives for optimisation problems. The software stack is completed by python bindings in pygafro and a ROS interface in gafro_ros. △ Less

Submitted 29 October, 2023; originally announced October 2023.

Transport Study of Charge Carrier Scattering in Monolayer WSe$_2$

Authors: Andrew Y. Joe, Kateryna Pistunova, Kristen Kaasbjerg, Ke Wang, Bumho Kim, Daniel A. Rhodes, Takashi Taniguchi, Kenji Watanabe, James Hone, Tony Low, Luis A. Jauregui, Philip Kim

Abstract: Employing flux-grown single crystal WSe$_2$, we report charge carrier scattering behaviors measured in $h$-BN encapsulated monolayer field effect transistors. We perform quantum transport measurements across various hole densities and temperatures and observe a non-monotonic change of transport mobility $μ$ as a function of hole density in the degenerately doped sample. This unusual behavior can b… ▽ More Employing flux-grown single crystal WSe$_2$, we report charge carrier scattering behaviors measured in $h$-BN encapsulated monolayer field effect transistors. We perform quantum transport measurements across various hole densities and temperatures and observe a non-monotonic change of transport mobility $μ$ as a function of hole density in the degenerately doped sample. This unusual behavior can be explained by energy dependent scattering amplitude of strong defects calculated using the T-matrix approximation. Utilizing long mean-free path ($>$500 nm), we demonstrate the high quality of our electronic devices by showing quantized conductance steps from an electrostatically-defined quantum point contact. Our results show the potential for creating ultra-high quality quantum optoelectronic devices based on atomically thin semiconductors. △ Less

Submitted 10 October, 2023; v1 submitted 6 October, 2023; originally announced October 2023.

Comments: 6 pages, 4 figures

Geometric Projectors: Geometric Constraints based Optimization for Robot Behaviors

Authors: Xuemin Chi, Tobias Löw, Yiming Li, Zhitao Liu, Sylvain Calinon

Abstract: Generating motion for robots that interact with objects of various shapes is a complex challenge, further complicated when the robot's own geometry and multiple desired behaviors are considered. To address this issue, we introduce a new framework based on Geometric Projectors (GeoPro) for constrained optimization. This novel framework allows for the generation of task-agnostic behaviors that are c… ▽ More Generating motion for robots that interact with objects of various shapes is a complex challenge, further complicated when the robot's own geometry and multiple desired behaviors are considered. To address this issue, we introduce a new framework based on Geometric Projectors (GeoPro) for constrained optimization. This novel framework allows for the generation of task-agnostic behaviors that are compliant with geometric constraints. GeoPro streamlines the design of behaviors in both task and configuration spaces, offering diverse functionalities such as collision avoidance and goal-reaching, while maintaining high computational efficiency. We validate the efficacy of our work through simulations and Franka Emika robotic experiments, comparing its performance against state-of-the-art methodologies. This comprehensive evaluation highlights GeoPro's versatility in accommodating robots with varying dynamics and precise geometric shapes. For additional materials, please visit: https://www.xueminchi.com/publications/geopro △ Less

Submitted 15 September, 2023; originally announced September 2023.

Comments: 9 pages, 5 figures

Enhanced Spin Hall Response From Aligned Kramers-Weyl Points in High Chern Number Semimetals

Authors: C. O. Ascencio, Wei Jiang, D. J. P. de Sousa, Seungjun Lee, Jian-** Wang, Tony Low

Abstract: We propose a spin Hall effect (SHE) enhancement mechanism due to Kramers-Weyl point (KWP) alignment in chiral topological semimetals with high Chern numbers (CNs). Through model Hamiltonian calculations, we identify enhancements in the intrinsic spin Hall conductivity (SHC) and the spin Hall angle (SHA). Such enhancements, attributed to a unique high CN KWP energetic alignment and a high degree of… ▽ More We propose a spin Hall effect (SHE) enhancement mechanism due to Kramers-Weyl point (KWP) alignment in chiral topological semimetals with high Chern numbers (CNs). Through model Hamiltonian calculations, we identify enhancements in the intrinsic spin Hall conductivity (SHC) and the spin Hall angle (SHA). Such enhancements, attributed to a unique high CN KWP energetic alignment and a high degree of SOC-induced band nesting, strongly depend on orbital-orbital interactions. This represents a novel mechanism to enhance SHE, differing from the spin-orbit induced anticrossing mechanism in gapped systems. Guided by this principle, we corroborate our results by means of first-principles calculations and reveal multiple realistic materials with large intrinsic SHCs and even larger SHAs than Pt. △ Less

Submitted 16 July, 2023; originally announced July 2023.

Comments: 6 pages, 4 figures

Projection-based first-order constrained optimization solver for robotics

Authors: Hakan Girgin, Tobias Löw, Teng Xue, Sylvain Calinon

Abstract: Robot programming tools ranging from inverse kinematics (IK) to model predictive control (MPC) are most often described as constrained optimization problems. Even though there are currently many commercially-available second-order solvers, robotics literature recently focused on efficient implementations and improvements over these solvers for real-time robotic applications. However, most often, t… ▽ More Robot programming tools ranging from inverse kinematics (IK) to model predictive control (MPC) are most often described as constrained optimization problems. Even though there are currently many commercially-available second-order solvers, robotics literature recently focused on efficient implementations and improvements over these solvers for real-time robotic applications. However, most often, these implementations stay problem-specific and are not easy to access or implement, or do not exploit the geometric aspect of the robotics problems. In this work, we propose to solve these problems using a fast, easy-to-implement first-order method that fully exploits the geometric constraints via Euclidean projections, called Augmented Lagrangian Spectral Projected Gradient Descent (ALSPG). We show that 1. using projections instead of full constraints and gradients improves the performance of the solver and 2. ALSPG stays competitive to the standard second-order methods such as iLQR in the unconstrained case. We showcase these results with IK and motion planning problems on simulated examples and with an MPC problem on a 7-axis manipulator experiment. △ Less

Submitted 30 June, 2023; originally announced June 2023.

Comments: 8 pages, 7 figures, submitted to Robotics and Automation Letters

Whole-Body Ergodic Exploration with a Manipulator Using Diffusion

Authors: Cem Bilaloglu, Tobias Löw, Sylvain Calinon

Abstract: This paper presents a whole-body robot control method for exploring and probing a given region of interest. The ergodic control formalism behind such an exploration behavior consists of matching the time-averaged statistics of a robot trajectory with the spatial statistics of the target distribution. Most existing ergodic control approaches assume the robots/sensors as individual point agents movi… ▽ More This paper presents a whole-body robot control method for exploring and probing a given region of interest. The ergodic control formalism behind such an exploration behavior consists of matching the time-averaged statistics of a robot trajectory with the spatial statistics of the target distribution. Most existing ergodic control approaches assume the robots/sensors as individual point agents moving in space. We introduce an approach that decomposes the whole-body of a robotic manipulator into multiple kinematically constrained agents. Then, we generate control actions by calculating a consensus among the agents. To do so, we use an ergodic control formulation called heat equation-driven area coverage (HEDAC) and slow the diffusion using the non-stationary heat equation. Our approach extends HEDAC to applications where robots have multiple sensors on the whole-body (such as tactile skin) and use all sensors to optimally explore the given region. We show that our approach increases the exploration performance in terms of ergodicity and scales well to real-world problems. We compare our method in kinematic simulations with the state-of-the-art and demonstrate the applicability of an online exploration task with a 7-axis Franka Emika robot. Additional material available at https://sites.google.com/view/w-ee-d/ △ Less

Submitted 3 November, 2023; v1 submitted 29 June, 2023; originally announced June 2023.

Comments: This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

Helical boundary modes from synthetic spin in a plasmonic lattice

Authors: Sang Hyun Park, Michael Sammon, Eugene Mele, Tony Low

Abstract: Artificial lattices have been used as a platform to extend the application of topological physics beyond electronic systems. Here, using the two-dimensional Lieb lattice as a prototypical example, we show that an array of disks which each support localized plasmon modes give rise to an analog of the quantum spin Hall state enforced by a synthetic time reversal symmetry. We find that an effective n… ▽ More Artificial lattices have been used as a platform to extend the application of topological physics beyond electronic systems. Here, using the two-dimensional Lieb lattice as a prototypical example, we show that an array of disks which each support localized plasmon modes give rise to an analog of the quantum spin Hall state enforced by a synthetic time reversal symmetry. We find that an effective next-nearest-neighbor coupling mechanism intrinsic to the plasmonic disk array introduces a nontrivial $Z_2$ topological order and gaps out the Bloch spectrum. A faithful map** of the plasmonic system onto a tight-binding model is developed and shown to capture its essential topological signatures. Full wave numerical simulations of graphene disks arranged in a Lieb lattice confirm the existence of propagating helical boundary modes in the nontrivial band gap. △ Less

Submitted 21 May, 2023; originally announced May 2023.

Comments: 14 pages, 5 figures, supplementary information included

Observation and enhancement of room temperature bilinear magnetoelectric resistance in sputtered topological semimetal Pt3Sn

Authors: Yihong Fan, Zach Cresswell, Yifei Yang, Wei Jiang, Yang Lv, Thomas Peterson, Delin Zhang, **ming Liu, Tony Low, Jian-** Wang

Abstract: Topological semimetal materials have become a research hotspot due to their intrinsic strong spin-orbit coupling which leads to large charge-to-spin conversion efficiency and novel transport behaviors. In this work, we have observed a bilinear magnetoelectric resistance (BMER) of up to 0.1 nm2A-1Oe-1 in a singlelayer of sputtered semimetal Pt3Sn at room temperature. Different from previous observa… ▽ More Topological semimetal materials have become a research hotspot due to their intrinsic strong spin-orbit coupling which leads to large charge-to-spin conversion efficiency and novel transport behaviors. In this work, we have observed a bilinear magnetoelectric resistance (BMER) of up to 0.1 nm2A-1Oe-1 in a singlelayer of sputtered semimetal Pt3Sn at room temperature. Different from previous observations, the value of BMER in sputtered Pt3Sn does not change out-of-plane due to the polycrystalline nature of Pt3Sn. The observation of BMER provides strong evidence of the existence of spin-momentum locking in the sputtered polycrystalline Pt3Sn. By adding an adjacent CoFeB magnetic layer, the BMER value of this bilayer system is doubled compared to the single Pt3Sn layer. This work broadens the material system in BMER study, which paves the way for the characterization of topological states and applications for spin memory and logic devices. △ Less

Submitted 24 May, 2023; v1 submitted 18 May, 2023; originally announced May 2023.

Robust negative longitudinal magnetoresistance and spin-orbit torque in sputtered Pt3Sn topological semimetal

Authors: Delin Zhang, Wei Jiang, Hwanhui Yun, Onri Jay Benally, Thomas Peterson, Zach Cresswell, Yihong Fan, Yang Lv, Guichuan Yu, Javier Garcia Barriocanal, Przemyslaw Swatek, K. Andre Mkhoyan, Tony Low, Jian-** Wang

Abstract: Contrary to topological insulators, topological semimetals possess a nontrivial chiral anomaly that leads to negative magnetoresistance and are hosts to both conductive bulk states and topological surface states with intriguing transport properties for spintronics. Here, we fabricate highly-ordered metallic Pt3Sn and Pt3SnxFe1-x thin films via sputtering technology. Systematic angular dependence (… ▽ More Contrary to topological insulators, topological semimetals possess a nontrivial chiral anomaly that leads to negative magnetoresistance and are hosts to both conductive bulk states and topological surface states with intriguing transport properties for spintronics. Here, we fabricate highly-ordered metallic Pt3Sn and Pt3SnxFe1-x thin films via sputtering technology. Systematic angular dependence (both in-plane and out-of-plane) study of magnetoresistance presents surprisingly robust quadratic and linear negative longitudinal magnetoresistance features for Pt3Sn and Pt3SnxFe1-x, respectively. We attribute the anomalous negative longitudinal magnetoresistance to the type-II Dirac semimetal phase (pristine Pt3Sn) and/or the formation of tunable Weyl semimetal phases through symmetry breaking processes, such as magnetic-atom do**, as confirmed by first-principles calculations. Furthermore, Pt3Sn and Pt3SnxFe1-x show the promising performance for facilitating the development of advanced spin-orbit torque devices. These results extend our understanding of chiral anomaly of topological semimetals and can pave the way for exploring novel topological materials for spintronic devices. △ Less

Submitted 9 May, 2023; originally announced May 2023.

Comments: 13 pages, 4 figures

Journal ref: Nature Communications volume 14, Article number: 4151 (2023)

Impact of cross-section uncertainties on supernova neutrino spectral parameter fitting in the Deep Underground Neutrino Experiment

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, P. Amedo, J. Anderson, D. A. Andrade , et al. (1294 additional authors not shown)

Abstract: A primary goal of the upcoming Deep Underground Neutrino Experiment (DUNE) is to measure the $\mathcal{O}(10)$ MeV neutrinos produced by a Galactic core-collapse supernova if one should occur during the lifetime of the experiment. The liquid-argon-based detectors planned for DUNE are expected to be uniquely sensitive to the $ν_e$ component of the supernova flux, enabling a wide variety of physics… ▽ More A primary goal of the upcoming Deep Underground Neutrino Experiment (DUNE) is to measure the $\mathcal{O}(10)$ MeV neutrinos produced by a Galactic core-collapse supernova if one should occur during the lifetime of the experiment. The liquid-argon-based detectors planned for DUNE are expected to be uniquely sensitive to the $ν_e$ component of the supernova flux, enabling a wide variety of physics and astrophysics measurements. A key requirement for a correct interpretation of these measurements is a good understanding of the energy-dependent total cross section $σ(E_ν)$ for charged-current $ν_e$ absorption on argon. In the context of a simulated extraction of supernova $ν_e$ spectral parameters from a toy analysis, we investigate the impact of $σ(E_ν)$ modeling uncertainties on DUNE's supernova neutrino physics sensitivity for the first time. We find that the currently large theoretical uncertainties on $σ(E_ν)$ must be substantially reduced before the $ν_e$ flux parameters can be extracted reliably: in the absence of external constraints, a measurement of the integrated neutrino luminosity with less than 10\% bias with DUNE requires $σ(E_ν)$ to be known to about 5%. The neutrino spectral shape parameters can be known to better than 10% for a 20% uncertainty on the cross-section scale, although they will be sensitive to uncertainties on the shape of $σ(E_ν)$. A direct measurement of low-energy $ν_e$-argon scattering would be invaluable for improving the theoretical precision to the needed level. △ Less

Submitted 7 July, 2023; v1 submitted 29 March, 2023; originally announced March 2023.

Comments: 25 pages, 21 figures

Report number: FERMILAB-PUB-23-132-CSAID-LBNF-ND-T

Journal ref: Phys. Rev. D 107, 112012 (2023)

SMaLL: A Software Framework for portable Machine Learning Libraries

Authors: Upasana Sridhar, Nicholai Tukanov, Elliott Binder, Tze Meng Low, Scott McMillan, Martin D. Schatz

Abstract: Interest in deploying Deep Neural Network (DNN) inference on edge devices has resulted in an explosion of the number and types of hardware platforms to use. While the high-level programming interface, such as TensorFlow, can be readily ported across different devices, high-performance inference implementations rely on a good map** of the high-level interface to the target hardware platform. Comm… ▽ More Interest in deploying Deep Neural Network (DNN) inference on edge devices has resulted in an explosion of the number and types of hardware platforms to use. While the high-level programming interface, such as TensorFlow, can be readily ported across different devices, high-performance inference implementations rely on a good map** of the high-level interface to the target hardware platform. Commonly, this map** may use optimizing compilers to generate code at compile time or high-performance vendor libraries that have been specialized to the target platform. Both approaches rely on expert knowledge to produce the map**, which may be time-consuming and difficult to extend to new architectures. In this work, we present a DNN library framework, SMaLL, that is easily extensible to new architectures. The framework uses a unified loop structure and shared, cache-friendly data format across all intermediate layers, eliminating the time and memory overheads incurred by data transformation between layers. Layers are implemented by simply specifying the layer's dimensions and a kernel -- the key computing operations of each layer. The unified loop structure and kernel abstraction allows us to reuse code across layers and computing platforms. New architectures only require the 100s of lines in the kernel to be redesigned. To show the benefits of our approach, we have developed software that supports a range of layer types and computing platforms, which is easily extensible for rapidly instantiating high performance DNN libraries. We evaluate our software by instantiating networks from the TinyMLPerf benchmark suite on 5 ARM platforms and 1 x86 platform ( an AMD Zen 2). Our framework shows end-to-end performance that is comparable to or better than ML Frameworks such as TensorFlow, TVM and LibTorch. △ Less

Submitted 8 March, 2023; originally announced March 2023.

Comments: 14 pages, 12 figures

Universality of the {\bf q}=1/2 Orbital Magnetism in the Pseudogap Phase of the High-$T_c$ superconductor $\rm YBa_{2}Cu_{3}O_{6+x}$

Authors: Dalila Bounoua, Yvan Sidis, Martin Boehm, Paul Steffens, Toshinao Loew, Lin Shan Guo, Jun Qian, Xin Yao, Philippe Bourges

Abstract: Several decades of debate have centered around the nature of the enigmatic pseudo-gap state in high temperature superconducting copper oxides. Recently, we reported polarized neutron diffraction measurements that suggested the existence of a magnetic texture bound to the pseudo-gap phase [Bounoua, {\it et al}. Communications Physics 5, 268 (2022)]. Such a magnetic texture is likely to involve the… ▽ More Several decades of debate have centered around the nature of the enigmatic pseudo-gap state in high temperature superconducting copper oxides. Recently, we reported polarized neutron diffraction measurements that suggested the existence of a magnetic texture bound to the pseudo-gap phase [Bounoua, {\it et al}. Communications Physics 5, 268 (2022)]. Such a magnetic texture is likely to involve the spontaneous appearance of loop currents within the CuO$_2$ unit cells, which give birth to complex correlated patterns. In the underdoped ${\rm YBa_{2}Cu_{3}O_{6.6}}$, the magnetic structure factor of such an orbital magnetic texture gives rise to two distinct magnetic responses at {\bf q}=0 and {\bf q}=1/2. As this pattern alters the lattice translation invariance, such a state of matter could contribute to an instability of the Fermi surface. Here, we report polarized neutron scattering measurements on a nearly optimally doped high quality single crystal of ${\rm YBa_{2}Cu_{3}O_{6.9}}$ that exhibits the same {\bf q}=1/2 magnetism and a weakly overdoped ${\rm YBa_{2}Cu_{3}O_{7}}$ sample where this signal is no longer sizeable. The in-plane and out-of-plane magnetic neutron scattering intensities in ${\rm YBa_{2}Cu_{3}O_{6.9}}$ (at {\bf q}=1/2) and ${\rm YBa_{2}Cu_{3}O_{6.85}}$ (at {\bf q}=0), reported previously, display the same temperature dependent hallmarks. The magnitudes of both {\bf q}=0 and {\bf q}=1/2 magnetic signals further exhibit the same trends upon do** in ${\rm YBa_{2}Cu_{3}O_{6+x}}$, confirming that they are likely intertwined. △ Less

Submitted 26 November, 2023; v1 submitted 3 February, 2023; originally announced February 2023.

Comments: supplemental information + 6 figures

Journal ref: Phys. Rev. B 108, 214408 (2023)

Dipole-matter interactions governed by the asymmetry of Maxwell equations

Authors: Yuhan Zhong, Chan Wang, Chenxu Bian, Xuhuinan Chen, Jialin Chen, Xingjian Zhu, Hao Hu, Tony Low, Hongsheng Chen, Baile Zhang, Xiao Lin

Abstract: Directionally molding the near-field and far-field radiation lies at the heart of nanophotonics and is crucial for applications such as on-chip information processing and chiral quantum networks. The most fundamental model for radiating structures is a dipolar source located inside a homogeneous matter. However, the influence of matter on the directionality of dipolar radiation is oftentimes overl… ▽ More Directionally molding the near-field and far-field radiation lies at the heart of nanophotonics and is crucial for applications such as on-chip information processing and chiral quantum networks. The most fundamental model for radiating structures is a dipolar source located inside a homogeneous matter. However, the influence of matter on the directionality of dipolar radiation is oftentimes overlooked, especially for the near-field radiation. We show that the dipole-matter interaction is intrinsically asymmetric and does not fulfill the duality principle, originating from the inherent asymmetry of Maxwell equations, i.e., electric charge and current are ubiquitous but their magnetic counterparts are non-existent to elusive. Moreover, we find that the asymmetric dipole-matter interaction could offer an enticing route to reshape the directionality of not only the near-field radiation but also the far-field radiation. As an example, both the near-field and far-field radiation directionality of Huygens dipole (located close to a dielectric-metal interface) would be reversed, if the dipolar position is changed from the dielectric region to the metal region. △ Less

Submitted 3 April, 2023; v1 submitted 30 January, 2023; originally announced January 2023.

Sum-Based Scoring for Dichotomous and Likert-scale Questions

Authors: Tiffany A. Low, Edward D. White, Clay M. Koschnick, John J. Elshaw

Abstract: In this article we investigate how to score a dichotomous scored question when co-mingled with a typically scored set of Likert scale questions. The goal is to find the upper value of the dichotomous response such that no single question is overly weighted when analyzing the summed values of the entire set of questions. Results demonstrate that setting the upper value of the dichotomous value to t… ▽ More In this article we investigate how to score a dichotomous scored question when co-mingled with a typically scored set of Likert scale questions. The goal is to find the upper value of the dichotomous response such that no single question is overly weighted when analyzing the summed values of the entire set of questions. Results demonstrate that setting the upper value of the dichotomous value to the max value of the Likert scale question scale is inappropriate. We provide a more appropriate value to use when considering Likert scale questions up to the max value of 10. △ Less

Submitted 27 December, 2022; originally announced December 2022.

Comments: 7 pages, 1 Table

Highly-parallelized simulation of a pixelated LArTPC on a GPU

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1282 additional authors not shown)

Abstract: The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we pr… ▽ More The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we present the first implementation of a full microphysical simulator of a liquid argon time projection chamber (LArTPC) equipped with light readout and pixelated charge readout, developed for the DUNE Near Detector. The software is implemented with an end-to-end set of GPU-optimized algorithms. The algorithms have been written in Python and translated into CUDA kernels using Numba, a just-in-time compiler for a subset of Python and NumPy instructions. The GPU implementation achieves a speed up of four orders of magnitude compared with the equivalent CPU version. The simulation of the current induced on $10^3$ pixels takes around 1 ms on the GPU, compared with approximately 10 s on the CPU. The results of the simulation are compared against data from a pixel-readout LArTPC prototype. △ Less

Submitted 28 February, 2023; v1 submitted 19 December, 2022; originally announced December 2022.

Comments: 26 pages, 15 figures

Report number: FERMILAB-PUB-22-926-LBNF

Geometric Algebra for Optimal Control with Applications in Manipulation Tasks

Authors: Tobias Löw, Sylvain Calinon

Abstract: Many problems in robotics are fundamentally problems of geometry, which lead to an increased research effort in geometric methods for robotics in recent years. The results were algorithms using the various frameworks of screw theory, Lie algebra and dual quaternions. A unification and generalization of these popular formalisms can be found in geometric algebra. The aim of this paper is to showcase… ▽ More Many problems in robotics are fundamentally problems of geometry, which lead to an increased research effort in geometric methods for robotics in recent years. The results were algorithms using the various frameworks of screw theory, Lie algebra and dual quaternions. A unification and generalization of these popular formalisms can be found in geometric algebra. The aim of this paper is to showcase the capabilities of geometric algebra when applied to robot manipulation tasks. In particular the modelling of cost functions for optimal control can be done uniformly across different geometric primitives leading to a low symbolic complexity of the resulting expressions and a geometric intuitiveness. We demonstrate the usefulness, simplicity and computational efficiency of geometric algebra in several experiments using a Franka Emika robot. The presented algorithms were implemented in c++20 and resulted in the publicly available library \textit{gafro}. The benchmark shows faster computation of the kinematics than state-of-the-art robotics libraries. △ Less

Submitted 5 June, 2023; v1 submitted 14 December, 2022; originally announced December 2022.

Comments: 16 pages, 13 figuress

Journal ref: Tobias Löw and Sylvain Calinon. (2023). Geometric Algebra for Optimal Control with Applications in Manipulation Tasks. IEEE Transactions on Robotics

Automating Vascular Shunt Insertion with the dVRK Surgical Robot

Authors: Karthik Dharmarajan, Will Panitch, Muyan Jiang, Kishore Srinivas, Baiyu Shi, Yahav Avigal, Huang Huang, Thomas Low, Danyal Fer, Ken Goldberg

Abstract: Vascular shunt insertion is a fundamental surgical procedure used to temporarily restore blood flow to tissues. It is often performed in the field after major trauma. We formulate a problem of automated vascular shunt insertion and propose a pipeline to perform Automated Vascular Shunt Insertion (AVSI) using a da Vinci Research Kit. The pipeline uses a learned visual model to estimate the locus of… ▽ More Vascular shunt insertion is a fundamental surgical procedure used to temporarily restore blood flow to tissues. It is often performed in the field after major trauma. We formulate a problem of automated vascular shunt insertion and propose a pipeline to perform Automated Vascular Shunt Insertion (AVSI) using a da Vinci Research Kit. The pipeline uses a learned visual model to estimate the locus of the vessel rim, plans a grasp on the rim, and moves to grasp at that point. The first robot gripper then pulls the rim to stretch open the vessel with a dilation motion. The second robot gripper then proceeds to insert a shunt into the vessel phantom (a model of the blood vessel) with a chamfer tilt followed by a screw motion. Results suggest that AVSI achieves a high success rate even with tight tolerances and varying vessel orientations up to 30°. Supplementary material, dataset, videos, and visualizations can be found at https://sites.google.com/berkeley.edu/autolab-avsi. △ Less

Submitted 8 March, 2023; v1 submitted 4 November, 2022; originally announced November 2022.

Comments: Published in: IEEE International Conference on Robotics and Automation (ICRA) 2023

Identification and reconstruction of low-energy electrons in the ProtoDUNE-SP detector

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1235 additional authors not shown)

Abstract: Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is… ▽ More Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is one of the prototypes for the DUNE far detector, built and operated at CERN as a charged particle test beam experiment. A sample of low-energy electrons produced by the decay of cosmic muons is selected with a purity of 95%. This sample is used to calibrate the low-energy electron energy scale with two techniques. An electron energy calibration based on a cosmic ray muon sample uses calibration constants derived from measured and simulated cosmic ray muon events. Another calibration technique makes use of the theoretically well-understood Michel electron energy spectrum to convert reconstructed charge to electron energy. In addition, the effects of detector response to low-energy electron energy scale and its resolution including readout electronics threshold effects are quantified. Finally, the relation between the theoretical and reconstructed low-energy electron energy spectrum is derived and the energy resolution is characterized. The low-energy electron selection presented here accounts for about 75% of the total electron deposited energy. After the addition of lost energy using a Monte Carlo simulation, the energy resolution improves from about 40% to 25% at 50~MeV. These results are used to validate the expected capabilities of the DUNE far detector to reconstruct low-energy electrons. △ Less

Submitted 31 May, 2023; v1 submitted 2 November, 2022; originally announced November 2022.

Comments: 19 pages, 10 figures

Report number: FERMILAB-PUB-22-784, CERN-EP-DRAFT-MISC-2022-008

Journal ref: Phys. Rev. D 107, 092012 (2023)

Field-free-switching state diagram of perpendicular magnetization subjected to conventional and unconventional spin-orbit torques

Authors: D. J. P. de Sousa, P. M. Haney, J. P. Wang, Tony Low

Abstract: The lack of certain crystalline symmetries in strong spin-orbit-coupled non-magnetic materials allows for the existence of uncoventional spin Hall responses, with electrically generated transverse spin currents possessing collinear flow and spin directions. The injection of such spin currents into an adjacent ferromagnetic layer can excite magnetization dynamics via unconventional spin-orbit torqu… ▽ More The lack of certain crystalline symmetries in strong spin-orbit-coupled non-magnetic materials allows for the existence of uncoventional spin Hall responses, with electrically generated transverse spin currents possessing collinear flow and spin directions. The injection of such spin currents into an adjacent ferromagnetic layer can excite magnetization dynamics via unconventional spin-orbit torques, leading to deterministic switching in ferromagnets with perpendicular magnetic anisotropy. We study the interplay between conventional and unconventional spin-orbit torques on the magnetization dynamics of a perpendicular ferromagnet in the small intrinsic dam** limit, and identify a rich set of dynamical regimes that includes deterministic and probabilistic switching, precessional and pinning states. Contrary to common belief, we found that there exists a critical conventional spin Hall angle, beyond which deterministic magnetization switching transitions to a precessional or pinned state. Conversely, we showed that larger unconventional spin Hall angle is generally beneficial for deterministic switching. We derive an approximate expression that qualitatively describes the state diagram boundary between the full deterministic switching and precessional states and discuss a criterion for searching symmetry-broken spin Hall materials in order to maximize switching efficiency. Our work offers a roadmap towards energy efficient spintronic devices, which might opens doors for applications in advanced in-memory computing technologies. △ Less

Submitted 28 October, 2022; originally announced October 2022.

Room temperature spin-orbit torque efficiency in sputtered low-temperature superconductor delta-TaN

Authors: Przemyslaw Wojciech Swatek, Xudong Hang, Yihong Fan, Wei Jiang, Hwanhui Yun, Deyuan Lyu, Delin Zhang, Thomas J. Peterson, Protyush Sahu, Onri Jay Benally, Zach Cresswell, **ming Liu, Rabindra Pahari, Daniel Kukla, Tony Low, K. Andre Mkhoyan, Jian-** Wang

Abstract: In the course of searching for promising topological materials for applications in future topological electronics, we evaluated spin-orbit torques (SOTs) in high-quality sputtered $δ-$TaN/Co20Fe60B20 devices through spin-torque ferromagnetic resonance ST-FMR and spin pum** measurements. From the ST-FMR characterization we observed a significant linewidth modulation in the magnetic Co20Fe60B20 la… ▽ More In the course of searching for promising topological materials for applications in future topological electronics, we evaluated spin-orbit torques (SOTs) in high-quality sputtered $δ-$TaN/Co20Fe60B20 devices through spin-torque ferromagnetic resonance ST-FMR and spin pum** measurements. From the ST-FMR characterization we observed a significant linewidth modulation in the magnetic Co20Fe60B20 layer attributed to the charge-to-spin conversion generated from the $δ-$TaN layer. Remarkably, the spin-torque efficiency determined from ST-FMR and spin pum** measurements is as large as $Θ =$ 0.034 and 0.031, respectively. These values are over two times larger than for $α-$Ta, but almost five times lower than for $β-$Ta, which can be attributed to the low room temperature electrical resistivity $\sim 74μΩ$ cm in $δ-$TaN. A large spin diffusion length of at least $\sim8$ nm is estimated, which is comparable to the spin diffusion length in pure Ta. Comprehensive experimental analysis, together with density functional theory calculations, indicates that the origin of the pronounced SOT effect in $δ-$TaN can be mostly related to a significant contribution from the Berry curvature associated with the presence of a topically nontrivial electronic band structure in the vicinity of the Fermi level (EF). Through additional detailed theoretical analysis, we also found that an isostructural allotrope of the superconducting $δ-$TaN phase, the simple hexagonal structure, $θ-$TaN, has larger Berry curvature, and that, together with expected reasonable charge conductivity, it can also be a promising candidate for exploring a generation of spin-orbit torque magnetic random access memory as cheap, temperature stable, and highly efficient spin current sources. △ Less

Submitted 29 July, 2022; v1 submitted 18 July, 2022; originally announced July 2022.

Comments: 28 pages, 7 figures

Journal ref: Phys. Rev. Materials 6, 074206 (2022)

Reconstruction of interactions in the ProtoDUNE-SP detector with Pandora

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, B. Ali-Mohammadzadeh, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, R. Alvarez, P. Amedo , et al. (1203 additional authors not shown)

Abstract: The Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a char… ▽ More The Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a charged-particle test beam. This paper gives an overview of the Pandora reconstruction algorithms and how they have been tailored for use at ProtoDUNE-SP. In complex events with numerous cosmic-ray and beam background particles, the simulated reconstruction and identification efficiency for triggered test-beam particles is above 80% for the majority of particle type and beam momentum combinations. Specifically, simulated 1 GeV/$c$ charged pions and protons are correctly reconstructed and identified with efficiencies of 86.1$\pm0.6$% and 84.1$\pm0.6$%, respectively. The efficiencies measured for test-beam data are shown to be within 5% of those predicted by the simulation. △ Less

Submitted 17 July, 2023; v1 submitted 29 June, 2022; originally announced June 2022.

Comments: 39 pages, 20 figures. Accepted version. Published version available in Eur. Phys. J. C 83, 618 (2023) https://doi.org/10.1140/epjc/s10052-023-11733-2

Report number: FERMILAB-PUB-22-488-AD-ESH-LBNF-ND-SCD, CERN-EP-DRAFT-MISC-2022-007

Journal ref: Eur. Phys. J. C 83, 618 (2023)

Spin Torque Generated by Valley Hall Effect in WSe2

Authors: D. J. P. de Sousa, M. J. Sammon, Raseong Kim, Hai Li, Ian A. Young, Tony Low

Abstract: Monolayer transition metal dichalcogenides are promising materials for spintronics due to their robust spin-valley locked valence states, enabling efficient charge-to-spin conversion via valley Hall effect with non-equilibrium spins possessing long spin diffusion lengths of hundreds of nanometers. In this work, we show that the injection of a pure valley current, induced by valley Hall effect in a… ▽ More Monolayer transition metal dichalcogenides are promising materials for spintronics due to their robust spin-valley locked valence states, enabling efficient charge-to-spin conversion via valley Hall effect with non-equilibrium spins possessing long spin diffusion lengths of hundreds of nanometers. In this work, we show that the injection of a pure valley current, induced by valley Hall effect in a WSe2 monolayer, imparts a spin torque on the magnetization of an overlaid Fe or CoFe in a tunneling structure. The torque efficiency is found to be comparable to that in conventional perpendicular magnetic tunnel junctions and can be further optimized with valley Hall angle in WSe2. The valley nature of the spin torque gives rise to out-of-plane dam**-like torques in a current-in-plane configuration, vanishing charge transport perpendicular-to-the-plane as well as torque efficiency tunable through gating. △ Less

Submitted 20 June, 2022; originally announced June 2022.

Charge-to-spin conversion in twisted graphene/WSe$_2$ heterostructures

Authors: Seungjun Lee, D. J. P. de Sousa, Young-Kyun Kwon, Fernando de Juan, Zhendong Chi, Fèlix Casanova, Tony Low

Abstract: We investigate the twist angle dependence of spin-orbit coupling (SOC) proximity effects and charge-to-spin conversion (CSC) in graphene/WSe$_2$ heterostructures from first principles. The CSC is shown to strongly depend on the twist angle, with both the spin Hall and standard Rashba-Edelstein efficiencies optimized at or near 30° twisting. Symmetry breaking due to twisting also gives rise to an u… ▽ More We investigate the twist angle dependence of spin-orbit coupling (SOC) proximity effects and charge-to-spin conversion (CSC) in graphene/WSe$_2$ heterostructures from first principles. The CSC is shown to strongly depend on the twist angle, with both the spin Hall and standard Rashba-Edelstein efficiencies optimized at or near 30° twisting. Symmetry breaking due to twisting also gives rise to an unconventional Rashba-Edelstein effect, with electrically generated non-equilibrium spin densities possessing spins collinear to the applied electric field. We further discuss how the carrier do** concentration and band broadening control the crossover between the Fermi-sea and -surface spin response, which reconciles the seemingly disparate experimental observations of different CSC phenomena. △ Less

Submitted 19 June, 2022; originally announced June 2022.

Comments: 5 pages, 4 figures, Supplementary Information (13 pages, 7 figures)

Journal ref: Phys. Rev. B 106, (2022) 165420

Tensor Train for Global Optimization Problems in Robotics

Authors: Suhan Shetty, Teguh Lembono, Tobias Loew, Sylvain Calinon

Abstract: The convergence of many numerical optimization techniques is highly dependent on the initial guess given to the solver. To address this issue, we propose a novel approach that utilizes tensor methods to initialize existing optimization solvers near global optima. Our method does not require access to a database of good solutions. We first transform the cost function, which depends on both task par… ▽ More The convergence of many numerical optimization techniques is highly dependent on the initial guess given to the solver. To address this issue, we propose a novel approach that utilizes tensor methods to initialize existing optimization solvers near global optima. Our method does not require access to a database of good solutions. We first transform the cost function, which depends on both task parameters and optimization variables, into a probability density function. Unlike existing approaches, the joint probability distribution of the task parameters and optimization variables is approximated using the Tensor Train model, which enables efficient conditioning and sampling. We treat the task parameters as random variables, and for a given task, we generate samples for decision variables from the conditional distribution to initialize the optimization solver. Our method can produce multiple solutions (when they exist) faster than existing methods. We first evaluate the approach on benchmark functions for numerical optimization that are hard to solve using gradient-based optimization solvers with a naive initialization. The results show that the proposed method can generate samples close to global optima and from multiple modes. We then demonstrate the generality and relevance of our framework to robotics by applying it to inverse kinematics with obstacles and motion planning problems with a 7-DoF manipulator. △ Less

Submitted 22 November, 2023; v1 submitted 10 June, 2022; originally announced June 2022.

Comments: 25 pages, 21 figures

Plasmonic gain in current biased tilted Dirac nodes

Authors: Sang Hyun Park, Michael Sammon, Eugene Mele, Tony Low

Abstract: Surface plasmons, which allow extreme confinement of light, suffer from high intrinsic electronic losses. It has been shown that stimulated emission of electrons can transfer energy to plasmons and compensate for the high intrinsic losses. To-date, these realizations have relied on introducing an external gain media coupled to the surface plasmon. Here, we propose that plasmons in two-dimensional… ▽ More Surface plasmons, which allow extreme confinement of light, suffer from high intrinsic electronic losses. It has been shown that stimulated emission of electrons can transfer energy to plasmons and compensate for the high intrinsic losses. To-date, these realizations have relied on introducing an external gain media coupled to the surface plasmon. Here, we propose that plasmons in two-dimensional materials with closely located electron and hole Fermi pockets can experience gain, when an electrical current bias is applied along the displaced electron-hole pockets, without the need for an external gain media. As a prototypical example, we consider WTe$_2$ from the family of 1T$'$-MX$_2$ materials, whose electronic structure can be described within a type-II tilted massive Dirac model. We find that the nonlocal plasmonic response experiences prominent gain for experimentally accessible currents on the order of mA$μ$m$^{-1}$. Furthermore, the group velocity of the plasmon found from the isofrequency curves imply that the amplified plasmons are highly collimated along a direction perpendicular to the Dirac node tilt when the electrical current is applied along it. △ Less

Submitted 8 June, 2022; originally announced June 2022.

Comments: 12 pages, 4 figures

Convert widespread paraelectric perovskite to ferroelectrics

Authors: Hongwei Wang, Fujie Tang, Massimiliano Stengel, Hongjun Xiang, Qi An, Tony Low, Xifan Wu

Abstract: While nature provides a plethora of perovskite materials, only a few exhibits large ferroelectricity and possibly multiferroicity. The majority of perovskite materials have the non-polar CaTiO$_3$(CTO)structure, limiting the scope of their applications. Based on effective Hamiltonian model as well as first-principles calculations, we propose a general thin-film design method to stabilize the funct… ▽ More While nature provides a plethora of perovskite materials, only a few exhibits large ferroelectricity and possibly multiferroicity. The majority of perovskite materials have the non-polar CaTiO$_3$(CTO)structure, limiting the scope of their applications. Based on effective Hamiltonian model as well as first-principles calculations, we propose a general thin-film design method to stabilize the functional BiFeO$_3$(BFO)-type structure, which is a common metastable structure in widespread CaTiO$_3$-type perovskite oxides. It is found that the improper antiferroelectricity in CTO-type perovskite and ferroelectricity in BFO-type perovskite have distinct dependences on mechanical and electric boundary conditions, both of which involve oxygen octahedral rotation and tilt. The above difference can be used to stabilize the highly polar BFO-type structure in many CTO-type perovskite materials. △ Less

Submitted 2 April, 2022; originally announced April 2022.

Separation of track- and shower-like energy deposits in ProtoDUNE-SP using a convolutional neural network

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1204 additional authors not shown)

Abstract: Liquid argon time projection chamber detector technology provides high spatial and calorimetric resolutions on the charged particles traversing liquid argon. As a result, the technology has been used in a number of recent neutrino experiments, and is the technology of choice for the Deep Underground Neutrino Experiment (DUNE). In order to perform high precision measurements of neutrinos in the det… ▽ More Liquid argon time projection chamber detector technology provides high spatial and calorimetric resolutions on the charged particles traversing liquid argon. As a result, the technology has been used in a number of recent neutrino experiments, and is the technology of choice for the Deep Underground Neutrino Experiment (DUNE). In order to perform high precision measurements of neutrinos in the detector, final state particles need to be effectively identified, and their energy accurately reconstructed. This article proposes an algorithm based on a convolutional neural network to perform the classification of energy deposits and reconstructed particles as track-like or arising from electromagnetic cascades. Results from testing the algorithm on data from ProtoDUNE-SP, a prototype of the DUNE far detector, are presented. The network identifies track- and shower-like particles, as well as Michel electrons, with high efficiency. The performance of the algorithm is consistent between data and simulation. △ Less

Submitted 30 June, 2022; v1 submitted 31 March, 2022; originally announced March 2022.

Comments: 31 pages, 15 figures

Report number: FERMILAB-PUB-22-240-AD-ESH-LBNF-ND-SCD, CERN-EP-2022-077

Journal ref: Eur.Phys.J.C 82 (2022) 10, 903

Scintillation light detection in the 6-m drift-length ProtoDUNE Dual Phase liquid argon TPC

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1202 additional authors not shown)

Abstract: DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and… ▽ More DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and scintillation light. The scintillation light signal in these detectors can provide the trigger for non-beam events. In addition, it adds precise timing capabilities and improves the calorimetry measurements. In ProtoDUNE-DP, scintillation and electroluminescence light produced by cosmic muons in the LArTPC is collected by photomultiplier tubes placed up to 7 m away from the ionizing track. In this paper, the ProtoDUNE-DP photon detection system performance is evaluated with a particular focus on the different wavelength shifters, such as PEN and TPB, and the use of Xe-doped LAr, considering its future use in giant LArTPCs. The scintillation light production and propagation processes are analyzed and a comparison of simulation to data is performed, improving understanding of the liquid argon properties △ Less

Submitted 3 June, 2022; v1 submitted 30 March, 2022; originally announced March 2022.

Comments: 31 pages, 29 figures

Report number: CERN-EP-DRAFT-MISC-2022-003; FERMILAB-PUB-22-242-LBNF

A Gaseous Argon-Based Near Detector to Enhance the Physics Capabilities of DUNE

Authors: A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, R. Alvarez, P. Amedo , et al. (1220 additional authors not shown)

Abstract: This document presents the concept and physics case for a magnetized gaseous argon-based detector system (ND-GAr) for the Deep Underground Neutrino Experiment (DUNE) Near Detector. This detector system is required in order for DUNE to reach its full physics potential in the measurement of CP violation and in delivering precision measurements of oscillation parameters. In addition to its critical r… ▽ More This document presents the concept and physics case for a magnetized gaseous argon-based detector system (ND-GAr) for the Deep Underground Neutrino Experiment (DUNE) Near Detector. This detector system is required in order for DUNE to reach its full physics potential in the measurement of CP violation and in delivering precision measurements of oscillation parameters. In addition to its critical role in the long-baseline oscillation program, ND-GAr will extend the overall physics program of DUNE. The LBNF high-intensity proton beam will provide a large flux of neutrinos that is sampled by ND-GAr, enabling DUNE to discover new particles and search for new interactions and symmetries beyond those predicted in the Standard Model. △ Less

Submitted 11 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021

Snowmass Neutrino Frontier: DUNE Physics Summary

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, R. Alvarez , et al. (1221 additional authors not shown)

Abstract: The Deep Underground Neutrino Experiment (DUNE) is a next-generation long-baseline neutrino oscillation experiment with a primary physics goal of observing neutrino and antineutrino oscillation patterns to precisely measure the parameters governing long-baseline neutrino oscillation in a single experiment, and to test the three-flavor paradigm. DUNE's design has been developed by a large, internat… ▽ More The Deep Underground Neutrino Experiment (DUNE) is a next-generation long-baseline neutrino oscillation experiment with a primary physics goal of observing neutrino and antineutrino oscillation patterns to precisely measure the parameters governing long-baseline neutrino oscillation in a single experiment, and to test the three-flavor paradigm. DUNE's design has been developed by a large, international collaboration of scientists and engineers to have unique capability to measure neutrino oscillation as a function of energy in a broadband beam, to resolve degeneracy among oscillation parameters, and to control systematic uncertainty using the exquisite imaging capability of massive LArTPC far detector modules and an argon-based near detector. DUNE's neutrino oscillation measurements will unambiguously resolve the neutrino mass ordering and provide the sensitivity to discover CP violation in neutrinos for a wide range of possible values of $δ_{CP}$. DUNE is also uniquely sensitive to electron neutrinos from a galactic supernova burst, and to a broad range of physics beyond the Standard Model (BSM), including nucleon decays. DUNE is anticipated to begin collecting physics data with Phase I, an initial experiment configuration consisting of two far detector modules and a minimal suite of near detector components, with a 1.2 MW proton beam. To realize its extensive, world-leading physics potential requires the full scope of DUNE be completed in Phase II. The three Phase II upgrades are all necessary to achieve DUNE's physics goals: (1) addition of far detector modules three and four for a total FD fiducial mass of at least 40 kt, (2) upgrade of the proton beam power from 1.2 MW to 2.4 MW, and (3) replacement of the near detector's temporary muon spectrometer with a magnetized, high-pressure gaseous argon TPC and calorimeter. △ Less

Submitted 11 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021

Wide-angle giant photonic spin Hall effect

Authors: Zhihao Chen, Yu Chen, Yaodong Wu, Xinxing Zhou, Handong Sun, Tony Low, Hongsheng Chen, Xiao Lin

Abstract: Photonic spin Hall effect is a manifestation of spin-orbit interaction of light and can be measured by a transverse shift λof photons with opposite spins. The precise measurement of transverse shifts can enable many spin-related applications, such as precise metrology and optical sensing. However, this transverse shift is generally small (i.e. δ/λ<{10}^{-1}, λis the wavelength), which impedes its… ▽ More Photonic spin Hall effect is a manifestation of spin-orbit interaction of light and can be measured by a transverse shift λof photons with opposite spins. The precise measurement of transverse shifts can enable many spin-related applications, such as precise metrology and optical sensing. However, this transverse shift is generally small (i.e. δ/λ<{10}^{-1}, λis the wavelength), which impedes its precise measurement. To-date proposals to generate giant spin Hall effect (namely with δ/λ>{10}^{2}) have severe limitations, particularly its occurrence only over a narrow angular cone (with a width of Δθ<{1}^{\circ}). Here we propose a universal scheme to realize the wide-angle giant photonic spin Hall effect with Δθ>{70}^{\circ} by exploiting the interface between free space and uniaxial epsilon-near-zero media. The underlying mechanism is ascribed to the almost-perfect polarization splitting between s and p polarized waves at the designed interface. Remarkably, this almost-perfect polarization splitting does not resort to the interference effect and is insensitive to the incident angle, which then gives rise to the wide-angle giant photonic spin Hall effect. △ Less

Submitted 17 May, 2022; v1 submitted 22 February, 2022; originally announced February 2022.

Comments: 18 pages, 9 figures

Journal ref: Phys. Rev. B 106, 075409 (2022)

A perspective of twisted photonic structures

Authors: Jialin Chen, Xiao Lin, Mingyuan Chen, Tony Low, Hongsheng Chen, Siyuan Dai

Abstract: Moire superlattices-twisted van der Waals (vdW) structures with small angles-are attracting increasing attention in condensed matter physics, due to important phenomena revealed therein, including unconventional superconductivity, correlated insulating states, and ferromagnetism. Moire superlattices are typically comprised of atomic layers of vdW materials where the exotic physics arises from the… ▽ More Moire superlattices-twisted van der Waals (vdW) structures with small angles-are attracting increasing attention in condensed matter physics, due to important phenomena revealed therein, including unconventional superconductivity, correlated insulating states, and ferromagnetism. Moire superlattices are typically comprised of atomic layers of vdW materials where the exotic physics arises from the quantum electronic coupling between adjacent atomic layers. Recently, moire electronics has motivated their photonic counterparts. In addition to vdW materials, twisted photonic systems can also be comprised of metamaterials, metasurfaces, and photonic crystals, mediated by interlayer electromagnetic coupling instead. The interplay between short-ranged interlayer quantum and long-ranged electromagnetic coupling in twisted structures are expected to yield rich phenomena in nano-optics. This perspective reviews recent progress in twisted structures for nanophotonics and outlooks emerging topics, opportunities, fundamental challenges, and potential applications. △ Less

Submitted 25 November, 2021; originally announced November 2021.

Comments: 23 pages, 5 figures The following article has been accepted by Applied Physics Letters. After it is published, it will be found at https://aip.scitation.org/journal/apl

Hidden Magnetic Texture in the Pseudogap Phase of High-Tc $YBa_{2}Cu_{3}O_{6.6}$

Authors: Dalila Bounoua, Yvan Sidis, Toshinao Loew, Fréderic Bourdarot, Martin Boehm, Paul Steffens, Lucile Mangin-Thro, Victor Balédent, Philippe Bourges

Abstract: Despite decades of intense researches, the enigmatic pseudo-gap (PG) phase of superconducting cuprates remains an unsolved mystery. In the last 15 years, various symmetry breakings in the PG state have been discovered, spanning an intra-unit cell (IUC) magnetism, preserving the lattice translational (LT) symmetry but breaking time-reversal symmetry and parity, and an additional incipient charge de… ▽ More Despite decades of intense researches, the enigmatic pseudo-gap (PG) phase of superconducting cuprates remains an unsolved mystery. In the last 15 years, various symmetry breakings in the PG state have been discovered, spanning an intra-unit cell (IUC) magnetism, preserving the lattice translational (LT) symmetry but breaking time-reversal symmetry and parity, and an additional incipient charge density wave breaking the LT symmetry upon cooling. However, none of these states can (alone) account for the partial gap** of the Fermi surface. Here we report a hidden LT-breaking magnetism uisng polarized neutron diffraction. Our measurements reveal magnetic correlations, in two different underdoped $\rm YBa_{2}Cu_{3}O_{6.6}$ single crystals, that settle at the PG onset temperature with i) a planar propagation wave vector $(π,0) \equiv (0,π)$, yielding a doubling or quadrupling of the magnetic unit cell and ii) magnetic moments mainly pointing perpendicular to the $CuO_{2}$ layers. The LT-breaking magnetism is at short range suggesting the formation of clusters of 5-6 unit cells. Together with the previously reported IUC magnetism, it yields a hidden magnetic texture of the $CuO_{2}$ unit cells hosting loop currents, forming large supercells which may be crucial for elucidating the PG puzzle. △ Less

Submitted 20 May, 2022; v1 submitted 31 October, 2021; originally announced November 2021.

Comments: 5 figures, supplementary file upon request

Journal ref: Commun Phys 5, 268 (2022)

Gate tunable light-matter interaction in natural biaxial hyperbolic van der Waals heterostructures

Authors: Aneesh Bapat, Saurabh Dixit, Yashika Gupta, Tony Low, Anshuman Kumar

Abstract: The recent discovery of natural biaxial hyperbolicity in van der Waals crystals, such as $α$-MoO$_3$, has opened up new avenues for mid-IR nanophotonics due to their deep subwavelength phonon-polaritons. However, a significant challenge is the lack of active tunability of these hyperbolic phonon polaritons. In this work, we investigate heterostructures of graphene and $α$-MoO$_3$ for actively tuna… ▽ More The recent discovery of natural biaxial hyperbolicity in van der Waals crystals, such as $α$-MoO$_3$, has opened up new avenues for mid-IR nanophotonics due to their deep subwavelength phonon-polaritons. However, a significant challenge is the lack of active tunability of these hyperbolic phonon polaritons. In this work, we investigate heterostructures of graphene and $α$-MoO$_3$ for actively tunable hybrid plasmon phonon polariton modes via electrostatic gating in the mid-infrared spectral region. We observe a unique propagation direction dependent hybridization of graphene plasmon polaritons with hyperbolic phonon polaritons for experimentally feasible values of graphene chemical potential. We further report an application to tunable valley quantum interference in this system with a broad operational bandwidth due to the formation of these hybrid modes. This work presents a lithography-free alternative for actively tunable, anisotropic spontaneous emission enhancement using a sub-wavelength thick naturally biaxial hyperbolic materials. △ Less

Submitted 25 January, 2022; v1 submitted 14 October, 2021; originally announced October 2021.

Twisted two-dimensional material stacks for polarization optics

Authors: Kaveh Khaliji, Luis Martin-Moreno, Phaedon Avouris, Sang-Hyun Oh, Tony Low

Abstract: The ability to control light polarization state is critically important for diverse applications in information processing, telecommunications, and spectroscopy. Here, we propose that a stack of anisotropic van der Waals materials can facilitate the building of optical elements with Jones matrices of unitary, Hermitian, non-normal, singular, degenerate, and defective classes. We show that the twis… ▽ More The ability to control light polarization state is critically important for diverse applications in information processing, telecommunications, and spectroscopy. Here, we propose that a stack of anisotropic van der Waals materials can facilitate the building of optical elements with Jones matrices of unitary, Hermitian, non-normal, singular, degenerate, and defective classes. We show that the twisted stack with electrostatic control can function as arbitrary-birefringent wave-plate or arbitrary polarizer with tunable degree of non-normality, which in turn give access to plethora of polarization transformers including rotators, pseudorotators, symmetric and ambidextrous polarizers. Moreover, we discuss an electrostatic-reconfigurable stack which can be tuned to operate as four different polarizers and be used for Stokes polarimetry. △ Less

Submitted 15 January, 2023; v1 submitted 5 October, 2021; originally announced October 2021.

Delayed Asynchronous Iterative Graph Algorithms

Authors: Mark P. Blanco, Scott McMillan, Tze Meng Low

Abstract: Iterative graph algorithms often compute intermediate values and update them as computation progresses. Updated output values are used as inputs for computations in current or subsequent iterations; hence the number of iterations required for values to converge can potentially reduce if the newest values are asynchronously made available to other updates computed in the same iteration. In a multi-… ▽ More Iterative graph algorithms often compute intermediate values and update them as computation progresses. Updated output values are used as inputs for computations in current or subsequent iterations; hence the number of iterations required for values to converge can potentially reduce if the newest values are asynchronously made available to other updates computed in the same iteration. In a multi-threaded shared memory system, the immediate propagation of updated values can cause memory contention that may offset the benefit of propagating updates sooner. In some cases, the benefit of a smaller number of iterations may be diminished by each iteration taking longer. Our key idea is to combine the low memory contention that synchronous approaches have with the faster information sharing of asynchronous approaches. Our hybrid approach buffers updates from threads locally before committing them to the global store to control how often threads may cause conflicts for others while still sharing data within one iteration and hence speeding convergence. On a 112-thread CPU system, our hybrid approach attains up to 4.5% - 19.4% speedup over an asynchronous approach for Pagerank and up to 1.9% - 17% speedup over asynchronous Bellman Ford SSSP. Further, our hybrid approach attains 2.56x better performance than the synchronous approach. Finally, we provide insights as to why delaying updates is not helpful on certain graphs where connectivity is clustered on the main diagonal of the adjacency matrix. △ Less

Submitted 29 September, 2021; originally announced October 2021.

Comments: 6 pages, 6 figures, 2 tables, IEEE High Performance Extreme Computing (HPEC) Conference 2021

Near-field probing of image phonon-polaritons in hexagonal boron nitride on gold crystals

Authors: Sergey G. Menabde, Sergejs Boroviks, Jongtae Ahn, Jacob T. Heiden, Kenji Watanabe, Takashi Taniguchi, Tony Low, Do Kyung Hwang, N. Asger Mortensen, Min Seok Jang

Abstract: Near-field map** has been widely used to study hyperbolic phonon-polaritons in van der Waals crystals. However, an accurate measurement of the polaritonic loss remains challenging because of the inherent complexity of the near-field signal and the substrate-mediated loss. Here we demonstrate that large-area monocrystalline gold flakes, an atomically-flat low-loss substrate for image polaritons,… ▽ More Near-field map** has been widely used to study hyperbolic phonon-polaritons in van der Waals crystals. However, an accurate measurement of the polaritonic loss remains challenging because of the inherent complexity of the near-field signal and the substrate-mediated loss. Here we demonstrate that large-area monocrystalline gold flakes, an atomically-flat low-loss substrate for image polaritons, provide a platform for precise near-field measurement of the complex propagation constant of polaritons in van der Waals crystals. As a topical example, we measure propagation loss of the image phonon-polaritons in hexagonal boron nitride, revealing that their normalized propagation length exhibits a parabolic spectral dependency. Further, we show that image phonon-polaritons exhibit up to a twice lower normalized propagation loss, while being 2.4 times more compressed compared to the case of dielectric substrate. We conclude that the monocrystalline gold flakes provide a unique nanophotonic platform for probing and exploitation of the image modes in low-dimensional materials. △ Less

Submitted 22 December, 2021; v1 submitted 6 September, 2021; originally announced September 2021.

Journal ref: Science Advances 8, eabn0627 (2022)

Low exposure long-baseline neutrino oscillation sensitivity of the DUNE experiment

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, P. Amedo, J. Anderson, C. Andreopoulos, M. Andreotti , et al. (1132 additional authors not shown)

Abstract: The Deep Underground Neutrino Experiment (DUNE) will produce world-leading neutrino oscillation measurements over the lifetime of the experiment. In this work, we explore DUNE's sensitivity to observe charge-parity violation (CPV) in the neutrino sector, and to resolve the mass ordering, for exposures of up to 100 kiloton-megawatt-years (kt-MW-yr). The analysis includes detailed uncertainties on t… ▽ More The Deep Underground Neutrino Experiment (DUNE) will produce world-leading neutrino oscillation measurements over the lifetime of the experiment. In this work, we explore DUNE's sensitivity to observe charge-parity violation (CPV) in the neutrino sector, and to resolve the mass ordering, for exposures of up to 100 kiloton-megawatt-years (kt-MW-yr). The analysis includes detailed uncertainties on the flux prediction, the neutrino interaction model, and detector effects. We demonstrate that DUNE will be able to unambiguously resolve the neutrino mass ordering at a 3$σ$ (5$σ$) level, with a 66 (100) kt-MW-yr far detector exposure, and has the ability to make strong statements at significantly shorter exposures depending on the true value of other oscillation parameters. We also show that DUNE has the potential to make a robust measurement of CPV at a 3$σ$ level with a 100 kt-MW-yr exposure for the maximally CP-violating values $δ_{\rm CP}} = \pmπ/2$. Additionally, the dependence of DUNE's sensitivity on the exposure taken in neutrino-enhanced and antineutrino-enhanced running is discussed. An equal fraction of exposure taken in each beam mode is found to be close to optimal when considered over the entire space of interest. △ Less

Submitted 3 September, 2021; originally announced September 2021.

Report number: FERMILAB-PUB-21-391-ND

Double Resonant Tunable Second Harmonic Generation in Two-dimensional Layered Materials through Band Nesting

Authors: Sudipta Romen Biswas, ** Yu, Zhenwei Wang, Diego Rabelo da Costa, Chujun Zhao, Shengjun Yuan, Tony Low

Abstract: We proposed a mechanism to generate giant anisotropic second harmonic nonlinear response via double resonance effect, achieved through band nesting via electronic bandstructure engineering. The ideal band setup would be a triplet of nested bands separated by the fundamental resonance energy, $\hbarω$. We demonstrate theoretically that the proposed phenomenon can be realized in bilayer SnS by band… ▽ More We proposed a mechanism to generate giant anisotropic second harmonic nonlinear response via double resonance effect, achieved through band nesting via electronic bandstructure engineering. The ideal band setup would be a triplet of nested bands separated by the fundamental resonance energy, $\hbarω$. We demonstrate theoretically that the proposed phenomenon can be realized in bilayer SnS by band tuning with perpendicular electrical bias, which maximizes the second harmonic susceptibility by several orders of magnitude. Moreover, the tunability of the polarization anisotropy can be useful for realizing novel polarization-sensitive devices. △ Less

Submitted 17 February, 2023; v1 submitted 16 August, 2021; originally announced August 2021.

Design, construction and operation of the ProtoDUNE-SP Liquid Argon TPC

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, P. Amedo, J. Anderson, C. Andreopoulos, M. Andreotti, M. P. Andrews , et al. (1158 additional authors not shown)

Abstract: The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber (LArTPC) that was constructed and operated in the CERN North Area at the end of the H4 beamline. This detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment (DUNE), which will be constructed at the Sandford Underground Research Facility (SURF) in Lead, South Dakota, USA.… ▽ More The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber (LArTPC) that was constructed and operated in the CERN North Area at the end of the H4 beamline. This detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment (DUNE), which will be constructed at the Sandford Underground Research Facility (SURF) in Lead, South Dakota, USA. The ProtoDUNE-SP detector incorporates full-size components as designed for DUNE and has an active volume of $7\times 6\times 7.2$~m$^3$. The H4 beam delivers incident particles with well-measured momenta and high-purity particle identification. ProtoDUNE-SP's successful operation between 2018 and 2020 demonstrates the effectiveness of the single-phase far detector design. This paper describes the design, construction, assembly and operation of the detector components. △ Less

Submitted 23 September, 2021; v1 submitted 4 August, 2021; originally announced August 2021.

Searching for solar KDAR with DUNE

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, P. Amedo, J. Anderson, C. Andreopoulos, M. Andreotti, M. P. Andrews , et al. (1157 additional authors not shown)

Abstract: The observation of 236 MeV muon neutrinos from kaon-decay-at-rest (KDAR) originating in the core of the Sun would provide a unique signature of dark matter annihilation. Since excellent angle and energy reconstruction are necessary to detect this monoenergetic, directional neutrino flux, DUNE with its vast volume and reconstruction capabilities, is a promising candidate for a KDAR neutrino search.… ▽ More The observation of 236 MeV muon neutrinos from kaon-decay-at-rest (KDAR) originating in the core of the Sun would provide a unique signature of dark matter annihilation. Since excellent angle and energy reconstruction are necessary to detect this monoenergetic, directional neutrino flux, DUNE with its vast volume and reconstruction capabilities, is a promising candidate for a KDAR neutrino search. In this work, we evaluate the proposed KDAR neutrino search strategies by realistically modeling both neutrino-nucleus interactions and the response of DUNE. We find that, although reconstruction of the neutrino energy and direction is difficult with current techniques in the relevant energy range, the superb energy resolution, angular resolution, and particle identification offered by DUNE can still permit great signal/background discrimination. Moreover, there are non-standard scenarios in which searches at DUNE for KDAR in the Sun can probe dark matter interactions. △ Less

Submitted 26 October, 2021; v1 submitted 19 July, 2021; originally announced July 2021.

Comments: 19 pages, 13 figures

Report number: FERMILAB-PUB-21-322-LBNF-ND

Journal ref: JCAP10(2021)065