-
Reconfigurable Intelligent Surface for Industrial Automation: mmWave Propagation Measurement, Simulation, and Control Algorithm Requirements
Authors:
Hamed Radpour,
Markus Hofer,
David Loschenbrand,
Lukas Walter Mayer,
Andreas Hofmann,
Martin Schiefer,
Thomas Zemen
Abstract:
Reconfigurable intelligent surfaces (RISs) enable reliable low-latency millimeter wave (mmWave) communication links in cases of a blocked line-of-sight (LoS) between the base station (BS) and the user equipment (UE), i.e. a RIS mounted on a wall or the ceiling provides a bypass for the radio communication link. We present an active RIS with 127 patch antenna elements arranged in a hexagonal grid f…
▽ More
Reconfigurable intelligent surfaces (RISs) enable reliable low-latency millimeter wave (mmWave) communication links in cases of a blocked line-of-sight (LoS) between the base station (BS) and the user equipment (UE), i.e. a RIS mounted on a wall or the ceiling provides a bypass for the radio communication link. We present an active RIS with 127 patch antenna elements arranged in a hexagonal grid for a center frequency of 23.8 GHz. Each RIS element uses an orthogonal polarization transformation to enable amplification using a field-effect transistor (FET). The source and drain voltages of each FET is controlled using two bits. We assume that the coordinates of the UE in an industrial control scenario are known to the RIS. We measure the received power on a 2D grid of 60 cm by 100 cm with the RIS working in reflective and active mode. The results show that the RIS can successfully focus the radio signal at the desired target points. The half-power beam width is characterized in axial and radial directions with respect to the RIS position, obtaining a practical RIS configuration update criterion for a mobile UE. These results clearly show that RISs are prominent solutions for enabling reliable wireless communication in indoor industrial scenarios.
△ Less
Submitted 12 February, 2024; v1 submitted 7 February, 2024;
originally announced February 2024.
-
Towards Cell-Free Massive MIMO: A Measurement-Based Analysis
Authors:
David Löschenbrand,
Markus Hofer,
Laura Bernadó,
Stefan Zelenbaba,
Thomas Zemen
Abstract:
Cell-free widely distributed massive multiple-input multiple-output (MIMO) systems utilize radio units spread out over a large geographical area. The radio signal of a user equipment (UE) is coherently detected by a subset of radio units (RUs) in the vicinity of the UE and processed jointly at the nearest baseband processing unit (BPU). This architecture promises two orders of magnitude less trans…
▽ More
Cell-free widely distributed massive multiple-input multiple-output (MIMO) systems utilize radio units spread out over a large geographical area. The radio signal of a user equipment (UE) is coherently detected by a subset of radio units (RUs) in the vicinity of the UE and processed jointly at the nearest baseband processing unit (BPU). This architecture promises two orders of magnitude less transmit power, spatial focusing at the UE position for high reliability, and consistent throughput over the coverage area. All these properties have been investigated so far from a theoretical point of view. To the best of our knowledge, this work presents the first empirical radio wave propagation measurements in the form of time-variant channel transfer functions for a linear, widely distributed antenna array with 32 single antenna RUs spread out over a range of 46.5 m. The large aperture allows for valuable insights into the propagation characteristics of cell-free systems. Three different co-located and widely distributed RU configurations and their properties in an urban environment are analyzed in terms of time-variant delay-spread, Doppler spread, path loss and the correlation of the local scattering function over space. For the development of 6G cell-free massive MIMO transceiver algorithms, we analyze properties such as channel hardening, channel aging as well as the signal to interference and noise ratio (SINR). Our empirical evidence supports the promising claims for widely distributed cell-free systems.
△ Less
Submitted 30 August, 2022; v1 submitted 4 July, 2022;
originally announced July 2022.
-
Multi-Node Vehicular Wireless Channels: Measurements, Large Vehicle Modelling, and Hardware-in-the-Loop Evaluation
Authors:
Stefan Zelenbaba,
Benjamin Rainer,
Markus Hofer,
David Löschenbrand,
Laura Bernadó,
Anja Dakić,
Thomas Zemen
Abstract:
Understanding multi-node vehicular wireless communication channels is crucial for future time-sensitive safety applications for human-piloted as well as partly autonomous vehicles on roads, railways and in the air. These highly dynamic wireless communication channels are characterized by rapidly changing channel statistics. In this paper we present the first fully mobile multi-node vehicular wirel…
▽ More
Understanding multi-node vehicular wireless communication channels is crucial for future time-sensitive safety applications for human-piloted as well as partly autonomous vehicles on roads, railways and in the air. These highly dynamic wireless communication channels are characterized by rapidly changing channel statistics. In this paper we present the first fully mobile multi-node vehicular wireless channel sounding system, which is capable of simultaneously capturing multiple channel frequency responses, ensuring that measurement conditions are identical for all observed links. We use it to analyze road scenarios with multiple vehicles and a large obstructing double-decker bus. The empirical measurement data is used to parametrize a model for the large obstructing vehicle within a geometry-based stochastic channel model. We compare the time-variant channel statistics obtained from our channel model with the ones from the measurement campaign. By means of a channel emulator we obtain the packet error rates of commercial modems for the measured and the simulated wireless communication channels and compare them, in order to validate the model at the link level. We find that the path loss, the root mean square (RMS) delay spread, and the RMS Doppler spread deviate by less than $3.6\,\mathrm{dB}$, $78\,\mathrm{ns}$, and $52\,\mathrm{Hz}$, respectively, for $80\%$ of the total simulation duration. The PER obtained from measured data is within the maximum and minimum bounds of our model for $86\%$ of the simulation duration.
△ Less
Submitted 6 July, 2021; v1 submitted 11 March, 2021;
originally announced March 2021.
-
Combating Massive MIMO Channel Aging by Orthogonal Precoding
Authors:
Thomas Zemen,
David Loeschenbrand
Abstract:
In this work we investigate ultra-reliable low-latency massive multiple-input multiple-output (MIMO) communication links in vehicular scenarios, where coherence between uplink and downlink cannot be assumed. In such scenarios the channel state information obtained in the uplink will be outdated for the following downlink phase. To compensate for this channel aging we will utilize orthogonal precod…
▽ More
In this work we investigate ultra-reliable low-latency massive multiple-input multiple-output (MIMO) communication links in vehicular scenarios, where coherence between uplink and downlink cannot be assumed. In such scenarios the channel state information obtained in the uplink will be outdated for the following downlink phase. To compensate for this channel aging we will utilize orthogonal precoding with two-dimensional precoding sequences in the time-frequency domain within an orthogonal frequency division multiplexing system. The channel hardening effect of massive MIMO transmission decreases, due to channel aging, with increasing frame duration and increasing velocity, while the channel hardening effect of orthogonal precoding (OP) increases with increasing time- and frequency-selectivity of the wireless communication channel. By combining massive MIMO and OP we can show by numeric link level simulation that the performance with outdated channel state information in terms of bit-error rate versus signal-to-noise ratio can be improved by two orders of magnitude.
△ Less
Submitted 21 May, 2019;
originally announced May 2019.
-
Low-Complexity Equalization for Orthogonal Time and Frequency Signaling (OTFS)
Authors:
Thomas Zemen,
Markus Hofer,
David Loeschenbrand
Abstract:
Recently, a new precoding technique called orthogonal time-frequency signaling (OTFS) has been proposed for time- and frequency-selective communication channels. OTFS precodes a data frame with a complete set of spreading sequences and transmits the results via orthogonal frequency division multiplexing (OFDM). OTFS uses two dimensional (2D) linear spreading sequences in time and frequency which a…
▽ More
Recently, a new precoding technique called orthogonal time-frequency signaling (OTFS) has been proposed for time- and frequency-selective communication channels. OTFS precodes a data frame with a complete set of spreading sequences and transmits the results via orthogonal frequency division multiplexing (OFDM). OTFS uses two dimensional (2D) linear spreading sequences in time and frequency which are the basis functions of a symplectic Fourier transform. OTFS allows the utilization of time- and frequency-diversity but requires maximum likelihood decoding to achieve full diversity. In this paper we show performance results of a low-complexity equalizer using soft-symbol feedback for interference cancellation after an initial minimum-mean square error equalization step. Performance results for an implementation in the delay-Doppler domain and in the time-frequency domain are compared. With our equalizer, OTFS achieves a gain of 5dB compared to OFDM for a bit error rate of $10^{-4}$ and a velocity of $200\,\text{km/h}$.
△ Less
Submitted 26 October, 2017;
originally announced October 2017.
-
Iterative Detection for Orthogonal Precoding in Doubly Selective Channels
Authors:
Thomas Zemen,
Markus Hofer,
David Loeschenbrand,
Christoph Pacher
Abstract:
Ultra-reliable wireless communication links require the utilization of all diversity sources of a wireless communication channel. Hadani et al. propose a two dimensional discrete symplectic Fourier transform (DSFT) as orthogonal pre-coder for a time-frequency modulation scheme. In this paper we explore \emph{general} orthogonal precoding (OP) and its performance in time- and frequency-selective ch…
▽ More
Ultra-reliable wireless communication links require the utilization of all diversity sources of a wireless communication channel. Hadani et al. propose a two dimensional discrete symplectic Fourier transform (DSFT) as orthogonal pre-coder for a time-frequency modulation scheme. In this paper we explore \emph{general} orthogonal precoding (OP) and its performance in time- and frequency-selective channels. We show that iterative parallel interference cancellation (PIC) and iterative channel estimation methods can be used for the detection of OP. A scalar signal model for OP transmission is obtained by PIC. Based on this signal model, we can prove that all constant modulus sequences, e.g. the DSFT basis functions or Walsh-Hadamard sequences, lead to the same performance for OP. We validate our receiver structure by numerical link level simulations of a vehicle-to-vehicle communication link with a relative velocity of $0\ldots200\,\text{km/h}$. We demonstrate that OP achieves a gain of about $4.8\,\text{dB}$ if compared to orthogonal frequency division multiplexing at a bit error rate of $10^{-4}$. Our performance results for coded OP are the best results for a fully documented receiver architecture, published so far.
△ Less
Submitted 13 March, 2018; v1 submitted 26 October, 2017;
originally announced October 2017.
