-
Reducing two-level system dissipations in 3D superconducting Niobium resonators by atomic layer deposition and high temperature heat treatment
Authors:
Yasmine Kalboussi,
Baptiste Delatte,
Sarra Bira,
Kassiogé Dembele,
Xiaoyan Li,
Frederic Miserque,
Nathalie Brun,
Michael Walls,
Jean-luc Maurice,
Diana Dragoe,
Jocelyne Leroy,
David Longuevergne,
Aurélie Gentils,
Stéphanie Jublot-Leclerc,
Gregoire Julien,
Fabien Eozenou,
Matthieu Baudrier,
Luc Maurice,
Thomas Proslier
Abstract:
Superconducting qubits have arisen as a leading technology platform for quantum computing which is on the verge of revolutionizing the world's calculation capacities. Nonetheless, the fabrication of computationally reliable qubit circuits requires increasing the quantum coherence lifetimes, which are predominantly limited by the dissipations of two-level system (TLS) defects present in the thin su…
▽ More
Superconducting qubits have arisen as a leading technology platform for quantum computing which is on the verge of revolutionizing the world's calculation capacities. Nonetheless, the fabrication of computationally reliable qubit circuits requires increasing the quantum coherence lifetimes, which are predominantly limited by the dissipations of two-level system (TLS) defects present in the thin superconducting film and the adjacent dielectric regions. In this paper, we demonstrate the reduction of two-level system losses in three-dimensional superconducting radio frequency (SRF) niobium resonators by atomic layer deposition (ALD) of a 10 nm aluminum oxide Al2O3 thin films followed by a high vacuum (HV) heat treatment at 650 °C for few hours. By probing the effect of several heat treatments on Al2O3-coated niobium samples by X-ray photoelectron spectroscopy (XPS) plus scanning and conventional high resolution transmission electron microscopy (STEM/HRTEM) coupled with electron energy loss spectroscopy (EELS) and (EDX) , we witness a dissolution of niobium native oxides and the modification of the Al2O3-Nb interface, which correlates with the enhancement of the quality factor at low fields of two 1.3 GHz niobium cavities coated with 10 nm of Al2O3.
△ Less
Submitted 6 February, 2024;
originally announced February 2024.
-
PIP-II SSR2 Cavities Fabrication and Processing Experience
Authors:
M. Parise,
D. Passarelli,
P. Berrutti,
D. Longuevergne,
P. Duchesne
Abstract:
The Proton Improvement Plan-II (PIP-II [1]) linac will include 35 Single Spoke Resonators type 2 (SSR2). A preproduction SSR2 cryomodule will contain 5 jacketed cavities. Several units are already manufactured and prepared for cold testing. In this work, data collected from the fabrication, processing and preparation of the cavities will be presented and the improvements implemented after the comp…
▽ More
The Proton Improvement Plan-II (PIP-II [1]) linac will include 35 Single Spoke Resonators type 2 (SSR2). A preproduction SSR2 cryomodule will contain 5 jacketed cavities. Several units are already manufactured and prepared for cold testing. In this work, data collected from the fabrication, processing and preparation of the cavities will be presented and the improvements implemented after the completion of the first unit will be highlighted.
△ Less
Submitted 17 July, 2023;
originally announced July 2023.
-
Design, Manufacturing, Assembly, and Lessons Learned of the Pre-production 325 MHz Couplers for the PIP-II Project at Fermilab
Authors:
J. Helsper,
S. Wallon,
D. Passarelli,
D. Longuevergne,
S. Kazakov,
N. Solyak
Abstract:
Five 325 MHz high-power couplers will be integrated into the pre-production Single Spoke Resonator Type-II (ppSSR2) cryomodule for the PIP-II project at Fermilab. Couplers were procured by both Fermilab and IJCLAB for this effort. The design of the coupler is described, including design optimizations from the previous generation. This paper then describes the coupler life cycle, including design,…
▽ More
Five 325 MHz high-power couplers will be integrated into the pre-production Single Spoke Resonator Type-II (ppSSR2) cryomodule for the PIP-II project at Fermilab. Couplers were procured by both Fermilab and IJCLAB for this effort. The design of the coupler is described, including design optimizations from the previous generation. This paper then describes the coupler life cycle, including design, manufacturing, and assembly, along with the lessons learned at each stage.
△ Less
Submitted 11 July, 2023;
originally announced July 2023.
-
Recent advances in metallographic polishing for SRF application
Authors:
O. Hryhorenko,
C. Z. Antoine,
T. Proslier,
F. Eozenou,
T. Dohmae,
S. Keckert,
O. Kugeler,
J. Knobloch,
D. Longuevergne
Abstract:
This paper is an overview of the metallographic polishing R&D program covering Niobium and Copper substrates treatment for thin film coating as an alternative fabrication pathway for 1.3 GHz elliptical cavities. The presented research is the result of a collaborative effort between IJCLab, CEA/Irfu, HZB, and KEK in order to develop innovative surface processing and cavity fabrication protocols cap…
▽ More
This paper is an overview of the metallographic polishing R&D program covering Niobium and Copper substrates treatment for thin film coating as an alternative fabrication pathway for 1.3 GHz elliptical cavities. The presented research is the result of a collaborative effort between IJCLab, CEA/Irfu, HZB, and KEK in order to develop innovative surface processing and cavity fabrication protocols capable of meeting stringent requirements for SRF surfaces, including the reduction of safety risks and ecological footprint, enhancing reliability, improving the surface roughness, and potentially allowing cost reduction. The research findings will be disclosed.
△ Less
Submitted 12 July, 2023; v1 submitted 6 July, 2023;
originally announced July 2023.
-
Performance Analysis of Spoke Resonators, Statistics from Cavity Fabrication to Cryomodule Testing
Authors:
A. Miyazaki,
P. Duchesne,
D. Ledrean,
D. Longuevergne,
G. Olry
Abstract:
Irène Joliot-Curie Laboratory (IJCLab) has been leading the development of spoke resonators in multiple international SRF projects, from fundamental R\&D, prototy**, to series production. The European Spallation Source (ESS) superconducting linac is the first of its kind to put into operation the spoke resonators. After three prototype cavities, 29 ESS production cavities have been processed, te…
▽ More
Irène Joliot-Curie Laboratory (IJCLab) has been leading the development of spoke resonators in multiple international SRF projects, from fundamental R\&D, prototy**, to series production. The European Spallation Source (ESS) superconducting linac is the first of its kind to put into operation the spoke resonators. After three prototype cavities, 29 ESS production cavities have been processed, tested, assembled into cryomodules at IJCLab, and then shipped to Uppsala for the site acceptance test. Seven prototypes for two other major projects, Multi-purpose hYbrid Research Reactor for High-tech Application (MYRRHA) and Proton Improvement Plan II (PIP-II), designed in collaboration with external institutions, have as well been processed and tested at IJCLab. A new challenge is to fully process series cavities in industry, following the successful implementation of 1.3~GHz elliptical cavities in the other projects. This paper summarises main results obtained from fabrication to final testing, including frequency tuning strategy, performance, limitation in vertical cryostat, and identifies future direction of projects and R\&D in the field of spoke cavities.
△ Less
Submitted 19 June, 2023;
originally announced June 2023.
-
Fabrication experience of the pre-production PIP-II SSR2 cavities at Fermilab
Authors:
M. Parise,
D. Passarelli,
P. Berrutti,
V. Roger,
D. Longuevergne,
P. Duchesne
Abstract:
The Proton Improvement Plan-II (PIP-II, [1]) linac will include 35 Single Spoke Resonators type 2 (SSR2). A total of eight pre-production SSR2 jacketed cavities will be procured and five installed in the first pre-production cryomodule. The mechanical design of the jacketed cavity has been finalized and it will be presented in this paper along with fabrication and processing experience. The import…
▽ More
The Proton Improvement Plan-II (PIP-II, [1]) linac will include 35 Single Spoke Resonators type 2 (SSR2). A total of eight pre-production SSR2 jacketed cavities will be procured and five installed in the first pre-production cryomodule. The mechanical design of the jacketed cavity has been finalized and it will be presented in this paper along with fabrication and processing experience. The importance of interfaces, quality controls and procurement aspects in the design phase will be remarked as well as lessons learned during the fabrication process. Furthermore, development studies will be presented together with other design validation tests.
△ Less
Submitted 6 September, 2022;
originally announced September 2022.
-
European Strategy for Particle Physics -- Accelerator R&D Roadmap
Authors:
C. Adolphsen,
D. Angal-Kalinin,
T. Arndt,
M. Arnold,
R. Assmann,
B. Auchmann,
K. Aulenbacher,
A. Ballarino,
B. Baudouy,
P. Baudrenghien,
M. Benedikt,
S. Bentvelsen,
A. Blondel,
A. Bogacz,
F. Bossi,
L. Bottura,
S. Bousson,
O. Brüning,
R. Brinkmann,
M. Bruker,
O. Brunner,
P. N. Burrows,
G. Burt,
S. Calatroni,
K. Cassou
, et al. (111 additional authors not shown)
Abstract:
The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified…
▽ More
The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified in the Strategy update. The R&D objectives include: improvement of the performance and cost-performance of magnet and radio-frequency acceleration systems; investigations of the potential of laser / plasma acceleration and energy-recovery linac techniques; and development of new concepts for muon beams and muon colliders. The goal of the roadmap is to document the collective view of the field on the next steps for the R&D programme, and to provide the evidence base to support subsequent decisions on prioritisation, resourcing and implementation.
△ Less
Submitted 30 March, 2022; v1 submitted 19 January, 2022;
originally announced January 2022.
-
Impact of geometry on the magnetic flux trap** of superconducting accelerating cavities
Authors:
David Longuevergne,
Akira Miyazaki
Abstract:
Controlling trapped magnetic flux in superconducting radiofrequency (RF) cavities is of crucial importance in modern accelerator projects. In order to study flux trap** efficiency and sensitiv- ity of surface resistance, dedicated experiments have been carried out on different types of low-\b{eta} superconducting accelerating cavities. Even under almost full trap** conditions, we found that th…
▽ More
Controlling trapped magnetic flux in superconducting radiofrequency (RF) cavities is of crucial importance in modern accelerator projects. In order to study flux trap** efficiency and sensitiv- ity of surface resistance, dedicated experiments have been carried out on different types of low-\b{eta} superconducting accelerating cavities. Even under almost full trap** conditions, we found that the measured magnetic sensitivities of these cavity geometries were significantly lower than the theoretical values predicted by commonly-used models based on local material properties. This must be resolved by taking account of geometrical effects of flux trap** and flux oscillation under RF surface current in such cavity shape. In this paper, we propose a new approach to convolute the influence of geometries. We point out a puzzling contradiction between sample measurements and recent cavity experiments, which leads to two different hypotheses to simulate oscillating flux trapped in the cavity surface. A critical reconsideration of flux oscillation by the RF Lorentz force, compared with temperature map** studies in elliptical cavities, favoured the results of previous sample measurements, which suggested preferential flux trap** of normal component to the cavity inner surface. Based on this observation, we builded a new model to our experimental results and the discrepancy between old theory and data were resolved.
△ Less
Submitted 14 May, 2021; v1 submitted 15 September, 2020;
originally announced September 2020.
-
The Large Hadron-Electron Collider at the HL-LHC
Authors:
P. Agostini,
H. Aksakal,
S. Alekhin,
P. P. Allport,
N. Andari,
K. D. J. Andre,
D. Angal-Kalinin,
S. Antusch,
L. Aperio Bella,
L. Apolinario,
R. Apsimon,
A. Apyan,
G. Arduini,
V. Ari,
A. Armbruster,
N. Armesto,
B. Auchmann,
K. Aulenbacher,
G. Azuelos,
S. Backovic,
I. Bailey,
S. Bailey,
F. Balli,
S. Behera,
O. Behnke
, et al. (312 additional authors not shown)
Abstract:
The Large Hadron electron Collider (LHeC) is designed to move the field of deep inelastic scattering (DIS) to the energy and intensity frontier of particle physics. Exploiting energy recovery technology, it collides a novel, intense electron beam with a proton or ion beam from the High Luminosity--Large Hadron Collider (HL-LHC). The accelerator and interaction region are designed for concurrent el…
▽ More
The Large Hadron electron Collider (LHeC) is designed to move the field of deep inelastic scattering (DIS) to the energy and intensity frontier of particle physics. Exploiting energy recovery technology, it collides a novel, intense electron beam with a proton or ion beam from the High Luminosity--Large Hadron Collider (HL-LHC). The accelerator and interaction region are designed for concurrent electron-proton and proton-proton operation. This report represents an update of the Conceptual Design Report (CDR) of the LHeC, published in 2012. It comprises new results on parton structure of the proton and heavier nuclei, QCD dynamics, electroweak and top-quark physics. It is shown how the LHeC will open a new chapter of nuclear particle physics in extending the accessible kinematic range in lepton-nucleus scattering by several orders of magnitude. Due to enhanced luminosity, large energy and the cleanliness of the hadronic final states, the LHeC has a strong Higgs physics programme and its own discovery potential for new physics. Building on the 2012 CDR, the report represents a detailed updated design of the energy recovery electron linac (ERL) including new lattice, magnet, superconducting radio frequency technology and further components. Challenges of energy recovery are described and the lower energy, high current, 3-turn ERL facility, PERLE at Orsay, is presented which uses the LHeC characteristics serving as a development facility for the design and operation of the LHeC. An updated detector design is presented corresponding to the acceptance, resolution and calibration goals which arise from the Higgs and parton density function physics programmes. The paper also presents novel results on the Future Circular Collider in electron-hadron mode, FCC-eh, which utilises the same ERL technology to further extend the reach of DIS to even higher centre-of-mass energies.
△ Less
Submitted 12 April, 2021; v1 submitted 28 July, 2020;
originally announced July 2020.
-
Open Microwave Cavity for use in a Purcell Enhancement Cooling Scheme
Authors:
N. Evetts,
I. Martens,
D. Bizzotto,
D. Longuevergne,
W. N. Hardy
Abstract:
A microwave cavity is described which can be used to cool lepton plasmas for potential use in synthesis of antihydrogen. The cooling scheme is an incarnation of the Purcell Effect: when plasmas are coupled to a microwave cavity, the plasma cooling rate is resonantly enhanced through increased spontaneous emission of cyclotron radiation. The cavity forms a three electrode section of a Penning-Malmb…
▽ More
A microwave cavity is described which can be used to cool lepton plasmas for potential use in synthesis of antihydrogen. The cooling scheme is an incarnation of the Purcell Effect: when plasmas are coupled to a microwave cavity, the plasma cooling rate is resonantly enhanced through increased spontaneous emission of cyclotron radiation. The cavity forms a three electrode section of a Penning-Malmberg trap and has a bulged cylindrical geometry with open ends aligned with the magnetic trap** axis. This allows plasmas to be injected and removed from the cavity without the need for moving parts while maintaining high quality factors for resonant modes. The cavity includes unique surface preparations for adjusting the cavity quality factor and achieving anti-static shielding using thin layers of nichrome and colloidal graphite respectively. Geometric design considerations for a cavity with strong cooling power and low equilibrium plasma temperatures are discussed. Cavities of this weak-bulge design will be applicable to many situations where an open geometry is required.
△ Less
Submitted 9 September, 2016;
originally announced September 2016.
-
Muon spin rotation studies of niobium for superconducting RF applications
Authors:
A. Grassellino,
C. Beard,
P. Kolb,
R. Laxdal,
N. S. Lockyer,
D. Longuevergne,
J. E. Sonier
Abstract:
In this work we investigate superconducting properties of niobium samples via application of the muon spin rotation/relaxation (muSR) technique. We employ for the first time the muSR technique to study samples that are cutout from large and small grain 1.5 GHz radio frequency (RF) single cell niobium cavities. The RF test of these cavities was accompanied by full temperature map** to characteriz…
▽ More
In this work we investigate superconducting properties of niobium samples via application of the muon spin rotation/relaxation (muSR) technique. We employ for the first time the muSR technique to study samples that are cutout from large and small grain 1.5 GHz radio frequency (RF) single cell niobium cavities. The RF test of these cavities was accompanied by full temperature map** to characterize the RF losses in each of the samples. Results of the muSR measurements show that standard cavity surface treatments like mild baking and buffered chemical polishing (BCP) performed on the studied samples affect their surface pinning strength. We find an interesting correlation between high field RF losses and field dependence of the sample magnetic volume fraction measured via muSR. The muSR line width observed in ZF-muSR measurements matches the behavior of Nb samples doped with minute amounts of Ta or N impurities. An upper bound for the upper critical field Hc2 of these cutouts is found.
△ Less
Submitted 31 March, 2013; v1 submitted 26 March, 2013;
originally announced March 2013.
