-
Striation lines in intermittent fatigue crack growth in an Al alloy
Authors:
Anniina Kinnunen,
Ivan V. Lomakin,
Tero Mäkinen,
Kim Widell,
Juha Koivisto,
Mikko J. Alava
Abstract:
Fatigue failure of crystalline materials is a difficult problem in science and engineering, and recent results have shown that fatigue crack growth can occur in intermittent jumps which have fat-tailed distributions. As fatigue crack propagation is known to leave markings -- called striations -- on the fracture surface, the distances between these should also have fat-tailed distributions, if the…
▽ More
Fatigue failure of crystalline materials is a difficult problem in science and engineering, and recent results have shown that fatigue crack growth can occur in intermittent jumps which have fat-tailed distributions. As fatigue crack propagation is known to leave markings -- called striations -- on the fracture surface, the distances between these should also have fat-tailed distributions, if the crack propagation is intermittent. Here, we combine macroscale crack tip tracking in fatigue crack growth measurements of aluminum 5005 samples with \emph{post-mortem} scanning electron microscopy imaging of the striation lines. We introduce two different methods for extracting the striation line spacing from the images. What we find is a similar distribution of striation spacings as jump sizes using one of our methods, but the average striation spacing does not correlate with the crack growth rate. We conclude that we observe avalanche-like crack propagation, reflected in both the macroscale crack tip tracking as well as the analysis of the fracture surfaces. Our results show that the fracture surfaces can be used to study the intermittency of fatigue crack propagation and in development of crack-resistant materials. The advantages and disadvantages of the two methods introduced are discussed.
△ Less
Submitted 12 May, 2023;
originally announced May 2023.
-
Evidence of the disorder-independent electron-phonon scattering time in thin NbN films
Authors:
A. I. Lomakin,
E. M. Baeva,
A. D. Triznova,
N. A. Titova,
P. I. Zolotov,
A. V. Semenov,
D. E. Sunegin,
A. V. Lubenchenko,
A. I. Kolbatova,
G. N. Goltsman
Abstract:
We report on experimental study of the effect of disorder on electronic parameters and inelastic scattering mechanisms in ultrathin superconducting NbN films, which are commonly used in single-photon detectors. An increase in disorder in the studied 2.5 nm thick NbN films characterized by Ioffe-Regel parameter from 6.3 to 1.6 is accompanied by a decrease in the critical temperature $T_c$ from 11.5…
▽ More
We report on experimental study of the effect of disorder on electronic parameters and inelastic scattering mechanisms in ultrathin superconducting NbN films, which are commonly used in single-photon detectors. An increase in disorder in the studied 2.5 nm thick NbN films characterized by Ioffe-Regel parameter from 6.3 to 1.6 is accompanied by a decrease in the critical temperature $T_c$ from 11.5 K to 3.4 K. By measuring magnetoconductance in the range from $T_c$ to $\sim3T_c$, we extract the inelastic scattering rates of electrons, including electron-phonon (e-ph) scattering rates $τ_{e-ph}^{-1}$. We observe that $τ_{e-ph}^{-1}$ and their temperature dependencies are insensitive to disorder that is not described by the existing models of the e-ph scattering in disordered metals and can be due to the presence of weakly disordered metal grains. As the temperature decreases the temperature dependence $τ_{e-ph}^{-1}$ changes from $T^3$ to $T^2$, which can be result of a decrease in the dimension of the phonons involved in the e-ph scattering. The obtained values of material parameters of ultrathin NbN films can be useful for optimization of performance of NbN-based electronic devices.
△ Less
Submitted 9 December, 2022; v1 submitted 11 July, 2022;
originally announced July 2022.
-
Plasticity of an extra-strong nanocrystalline stainless steel controlled by the "dislocation-segregation'' interaction
Authors:
N. A. Enikeev,
I. V. Lomakin,
M. M. Abramova,
A. M. Mavlyutov,
A. A. Lukyanchuk,
A. S. Shutov,
X. Sauvage
Abstract:
We study three structurally different states of nanocrystalline 316 steel and show that the state, where boundaries containing excess concentration of alloying elements are combined with mobile dislocations in grain interiors, allows maintaining extraordinarily high strength and remarkably enhanced plasticity. Underlying mechanisms featuring interaction between the segregations and mobile dislocat…
▽ More
We study three structurally different states of nanocrystalline 316 steel and show that the state, where boundaries containing excess concentration of alloying elements are combined with mobile dislocations in grain interiors, allows maintaining extraordinarily high strength and remarkably enhanced plasticity. Underlying mechanisms featuring interaction between the segregations and mobile dislocations are discussed.
△ Less
Submitted 17 June, 2021;
originally announced June 2021.
-
The SRG X-ray orbital observatory, its telescopes and first scientific results
Authors:
R. Sunyaev,
V. Arefiev,
V. Babyshkin,
A. Bogomolov,
K. Borisov,
M. Buntov,
H. Brunner,
R. Burenin,
E. Churazov,
D. Coutinho,
J. Eder,
N. Eismont,
M. Freyberg,
M. Gilfanov,
P. Gureyev,
G. Hasinger,
I. Khabibullin,
V. Kolmykov,
S. Komovkin,
R. Krivonos,
I. Lapshov,
V. Levin,
I. Lomakin,
A. Lutovinov,
P. Medvedev
, et al. (17 additional authors not shown)
Abstract:
The orbital observatory Spectrum-Roentgen-Gamma (SRG), equipped with the grazing-incidence X-ray telescopes Mikhail Pavlinsky ART-XC and eROSITA, was launched by Roscosmos to the Lagrange L2 point of the Sun-Earth system on July 13, 2019. The launch was carried out from the Baikonur Cosmodrome by a Proton-M rocket with a DM-03 upper stage. The German telescope eROSITA was installed on SRG under an…
▽ More
The orbital observatory Spectrum-Roentgen-Gamma (SRG), equipped with the grazing-incidence X-ray telescopes Mikhail Pavlinsky ART-XC and eROSITA, was launched by Roscosmos to the Lagrange L2 point of the Sun-Earth system on July 13, 2019. The launch was carried out from the Baikonur Cosmodrome by a Proton-M rocket with a DM-03 upper stage. The German telescope eROSITA was installed on SRG under an agreement between Roskosmos and the DLR, the German Aerospace Agency. In December 2019, SRG started to perform its main scientific task: scanning the celestial sphere to obtain X-ray maps of the entire sky in several energy ranges (from 0.2 to 8 keV with eROSITA, and from 4 to 30 keV with ART-XC). By mid-June 2021, the third six-month all-sky survey had been completed. Over a period of four years, it is planned to obtain eight independent maps of the entire sky in each of the energy ranges. The sum of these maps will provide high sensitivity and reveal more than three million quasars and over one hundred thousand massive galaxy clusters and galaxy groups. The availability of eight sky maps will enable monitoring of long-term variability (every six months) of a huge number of extragalactic and Galactic X-ray sources, including hundreds of thousands of stars with hot coronae. The rotation of the satellite around the axis directed toward the Sun with a period of four hours enables tracking the faster variability of bright X-ray sources during one day every half year. The chosen strategy of scanning the sky leads to the formation of deep survey zones near both ecliptic poles. The paper presents sky maps obtained by the telescopes on board SRG during the first survey of the entire sky and a number of results of deep observations performed during the flight to the L2 point in the frame of the performance verification program.(Abriged)
△ Less
Submitted 17 December, 2021; v1 submitted 27 April, 2021;
originally announced April 2021.
-
The ART-XC telescope on board the SRG observatory
Authors:
M. Pavlinsky,
A. Tkachenko,
V. Levin,
N. Alexandrovich,
V. Arefiev,
V. Babyshkin,
O. Batanov,
Yu. Bodnar,
A. Bogomolov,
A. Bubnov,
M. Buntov,
R. Burenin,
I. Chelovekov,
C. -T. Chen,
T. Drozdova,
S. Ehlert,
E. Filippova,
S. Frolov,
D. Gamkov,
S. Garanin,
M. Garin,
A. Glushenko,
A. Gorelov,
S. Grebenev,
S. Grigorovich
, et al. (37 additional authors not shown)
Abstract:
ART-XC (Astronomical Roentgen Telescope - X-ray Concentrator) is the hard X-ray instrument with grazing incidence imaging optics on board the Spektr-Roentgen-Gamma (SRG) observatory. The SRG observatory is the flagship astrophysical mission of the Russian Federal Space Program, which was successively launched into orbit around the second Lagrangian point (L2) of the Earth-Sun system with a Proton…
▽ More
ART-XC (Astronomical Roentgen Telescope - X-ray Concentrator) is the hard X-ray instrument with grazing incidence imaging optics on board the Spektr-Roentgen-Gamma (SRG) observatory. The SRG observatory is the flagship astrophysical mission of the Russian Federal Space Program, which was successively launched into orbit around the second Lagrangian point (L2) of the Earth-Sun system with a Proton rocket from the Baikonur cosmodrome on 13 July 2019. The ART-XC telescope will provide the first ever true imaging all-sky survey performed with grazing incidence optics in the 4-30 keV energy band and will obtain the deepest and sharpest map of the sky in the energy range of 4-12 keV. Observations performed during the early calibration and performance verification phase as well as during the on-going all-sky survey that started on 12 Dec. 2019 have demonstrated that the in-flight characteristics of the ART-XC telescope are very close to expectations based on the results of ground calibrations. Upon completion of its 4-year all-sky survey, ART-XC is expected to detect ~5000 sources (~3000 active galactic nuclei, including heavily obscured ones, several hundred clusters of galaxies, ~1000 cataclysmic variables and other Galactic sources), and to provide a high-quality map of the Galactic background emission in the 4-12 keV energy band. ART-XC is also well suited for discovering transient X-ray sources. In this paper, we describe the telescope, results of its ground calibrations, major aspects of the mission, the in-flight performance of ART-XC and first scientific results.
△ Less
Submitted 23 March, 2021;
originally announced March 2021.
-
The eROSITA X-ray telescope on SRG
Authors:
P. Predehl,
R. Andritschke,
V. Arefiev,
V. Babyshkin,
O. Batanov,
W. Becker,
H. Böhringer,
A. Bogomolov,
T. Boller,
K. Borm,
W. Bornemann,
H. Bräuninger,
M. Brüggen,
H. Brunner,
M. Brusa,
E. Bulbul,
M. Buntov,
V. Burwitz,
W. Burkert,
N. Clerc,
E. Churazov,
D. Coutinho,
T. Dauser,
K. Dennerl,
V. Doroshenko
, et al. (68 additional authors not shown)
Abstract:
eROSITA (extended ROentgen Survey with an Imaging Telescope Array) is the primary instrument on the Spectrum-Roentgen-Gamma (SRG) mission, which was successfully launched on July 13, 2019, from the Baikonour cosmodrome. After the commissioning of the instrument and a subsequent calibration and performance verification phase, eROSITA started a survey of the entire sky on December 13, 2019. By the e…
▽ More
eROSITA (extended ROentgen Survey with an Imaging Telescope Array) is the primary instrument on the Spectrum-Roentgen-Gamma (SRG) mission, which was successfully launched on July 13, 2019, from the Baikonour cosmodrome. After the commissioning of the instrument and a subsequent calibration and performance verification phase, eROSITA started a survey of the entire sky on December 13, 2019. By the end of 2023, eight complete scans of the celestial sphere will have been performed, each lasting six months. At the end of this program, the eROSITA all-sky survey in the soft X-ray band (0.2--2.3\,keV) will be about 25 times more sensitive than the ROSAT All-Sky Survey, while in the hard band (2.3--8\,keV) it will provide the first ever true imaging survey of the sky. The eROSITA design driving science is the detection of large samples of galaxy clusters up to redshifts $z>1$ in order to study the large-scale structure of the universe and test cosmological models including Dark Energy. In addition, eROSITA is expected to yield a sample of a few million AGNs, including obscured objects, revolutionizing our view of the evolution of supermassive black holes. The survey will also provide new insights into a wide range of astrophysical phenomena, including X-ray binaries, active stars, and diffuse emission within the Galaxy. Results from early observations, some of which are presented here, confirm that the performance of the instrument is able to fulfil its scientific promise. With this paper, we aim to give a concise description of the instrument, its performance as measured on ground, its operation in space, and also the first results from in-orbit measurements.
△ Less
Submitted 7 October, 2020;
originally announced October 2020.
-
Microstructure, mechanical properties and aging behaviour of nanocrystalline copper-beryllium alloy
Authors:
Ivan Lomakin,
Miguel Castillo-Rodríguez,
Xavier Sauvage
Abstract:
A complex study of aging kinetics for both coarse-grained and nanostructured by severe plastic deformation Cu -- 2 wt% Be alloy is reported. It is shown that aging of a coarse-grained alloy leads to continuous formation of nanosized CuBe body centred cubic (bcc, CsCl -- type) semi-coherent particles with the {220} Cu // {200} CuBe crystallographic orientation relationship. These particles created…
▽ More
A complex study of aging kinetics for both coarse-grained and nanostructured by severe plastic deformation Cu -- 2 wt% Be alloy is reported. It is shown that aging of a coarse-grained alloy leads to continuous formation of nanosized CuBe body centred cubic (bcc, CsCl -- type) semi-coherent particles with the {220} Cu // {200} CuBe crystallographic orientation relationship. These particles created significant internal stress fields and became obstacles for dislocation glide that resulted in a change in the hardness from 95 Vickers hardness (HV) for the solubilized alloy to 400 HV for the aged one. The severe plastic deformation led to the formation of a single-phase nanograined microstructure with an average grain size of 20 nm and 390 HV. It was found that this grain size was slightly driven by grain boundary segregation. Further aging of the nanocrystalline alloy led to the discontinuous formation of precipitates on the former Cu grain boundaries and skip** of metastable phases. Significant age hardening with a maximum hardness of 466 HV for the aged nanostructured alloy was observed. Mechanical tests result revealed a strong influence of microstructure and further aging on strength capability of the alloy for both coarse-grained and nanostructured alloy. A good thermal stability in the nanostructured alloy was also noticed. Theoretical calculations of the hardness value for the CuBe phase are provided. It was shown that Be as a light alloying elements could be used for direct change of microstructure of severely deformed copper alloys.
△ Less
Submitted 11 May, 2020;
originally announced May 2020.
