-
Dislocation-based strength model for high energy density conditions
Authors:
Damian C. Swift,
Kazem Alidoost,
Ryan Austin,
Thomas Lockard,
Christine Wu,
Sebastien Hamel,
John E. Klepeis,
Pedro Peralta
Abstract:
We derive a continuum-level plasticity model for polycrystalline materials in the high energy density regime, based on a single dislocation density and single mobility mechanism, with an evolution model for the dislocation density. The model is formulated explicitly in terms of quantities connected closely with equation of state (EOS) theory, in particular the shear modulus and Einstein temperatur…
▽ More
We derive a continuum-level plasticity model for polycrystalline materials in the high energy density regime, based on a single dislocation density and single mobility mechanism, with an evolution model for the dislocation density. The model is formulated explicitly in terms of quantities connected closely with equation of state (EOS) theory, in particular the shear modulus and Einstein temperature, which reduces the number of unconstrained parameters while increasing the range of applicability. The least constrained component is the Peierls barrier $E_P$, which is however accessible by atomistic simulations. We demonstrate an efficient method to estimate the variation of $E_P$ with compression, constrained to fit a single flow stress datum. The formulation for dislocation mobility accounts for some or possibly all of the stiffening at high strain rates usually attributed to phonon drag. The configurational energy of the dislocations is accounted for explicitly, giving a self-consistent calculation of the conversion of plastic work to heat. The configurational energy is predicted to contribute to the mean pressure, and may reach several percent in the terapascal range, which may be significant when inferring scalar EOS data from dynamic loading experiments. The bulk elastic strain energy also contributes to the pressure, but appears to be much smaller. Although inherently describing the plastic relaxation of elastic strain, the model can be manipulated to estimate the flow stress as a function of mass density, temperature, and strain rate, which is convenient to compare with other models and inferences from experiment. The deduced flow stress reproduces systematic trends observed in elastic waves and instability growth experiments, and makes testable predictions of trends versus material and crystal type over a wide range of pressure and strain rate.
△ Less
Submitted 26 July, 2022; v1 submitted 12 October, 2021;
originally announced October 2021.
-
Atom-in-jellium predictions of the shear modulus at high pressure
Authors:
Damian C. Swift,
Thomas Lockard,
Sebastien Hamel,
Christine J. Wu,
Lorin X. Benedict,
Philip A. Sterne
Abstract:
Atom-in-jellium calculations of the Einstein frequency in condensed matter and of the equation of state were used to predict the variation of shear modulus from zero pressure to ~$10^7$ g/cm$^3$, for several elements relevant to white dwarf (WD) stars and other self-gravitating systems. This is by far the widest range reported electronic structure calculation of shear modulus, spanning from ambien…
▽ More
Atom-in-jellium calculations of the Einstein frequency in condensed matter and of the equation of state were used to predict the variation of shear modulus from zero pressure to ~$10^7$ g/cm$^3$, for several elements relevant to white dwarf (WD) stars and other self-gravitating systems. This is by far the widest range reported electronic structure calculation of shear modulus, spanning from ambient through the one-component plasma to extreme relativistic conditions. The predictions were based on a relationship between Debye temperature and shear modulus which we assess to be accurate at the o(10%) level, and is the first known use of atom-in-jellium theory to calculate a shear modulus. We assessed the overall accuracy of the method by comparing with experimental measurements and more detailed electronic structure calculations at lower pressures.
△ Less
Submitted 27 August, 2021; v1 submitted 25 May, 2021;
originally announced May 2021.
-
Atom-in-jellium equations of state and melt curves in the white dwarf regime
Authors:
Damian C. Swift,
Thomas Lockard,
Sebastien Hamel,
Christine J. Wu,
Lorin X. Benedict,
Philip A. Sterne,
Heather D. Whitley
Abstract:
Atom-in-jellium calculations of the electron states, and perturbative calculations of the Einstein frequency, were used to construct equations of state (EOS) from around $10^{-5}$ to $10^7$g/cm$^3$ and $10^{-4}$ to $10^{6}$eV for elements relevant to white dwarf (WD) stars. This is the widest range reported for self-consistent electronic shell structure calculations. Elements of the same ratio of…
▽ More
Atom-in-jellium calculations of the electron states, and perturbative calculations of the Einstein frequency, were used to construct equations of state (EOS) from around $10^{-5}$ to $10^7$g/cm$^3$ and $10^{-4}$ to $10^{6}$eV for elements relevant to white dwarf (WD) stars. This is the widest range reported for self-consistent electronic shell structure calculations. Elements of the same ratio of atomic weight to atomic number were predicted to asymptote to the same $T=0$ isotherm, suggesting that, contrary to recent studies of the crystallization of WDs, the amount of gravitational energy that could be released by separation of oxygen and carbon is small. A generalized Lindemann criterion based on the amplitude of the ion-thermal oscillations calculated using atom-in-jellium theory, previously used to extrapolate melt curves for metals, was found to reproduce previous thermodynamic studies of the melt curve of the one component plasma with a choice of vibration amplitude consistent with low pressure results. For elements for which low pressure melting satisfies the same amplitude criterion, such as Al, this melt model thus gives a likely estimate of the melt curve over the full range of normal electronic matter; for the other elements, it provides a useful constraint on the melt locus.
△ Less
Submitted 4 March, 2021;
originally announced March 2021.
-
Sensitivity of stellar physics to the equation of state
Authors:
D. C. Swift,
T. Lockard,
M. Bethkenhagen,
A. Kritcher,
S. Hamel,
D. Dearborn
Abstract:
The formation and evolution of stars depends on various physical aspects of stellar matter, including the equation of state (EOS) and transport properties. Although often dismissed as `ideal gas-like' and therefore simple, states occurring in stellar matter are dense plasmas, and the EOS has not been established precisely. EOS constructed using multi-physics approaches found necessary for laborato…
▽ More
The formation and evolution of stars depends on various physical aspects of stellar matter, including the equation of state (EOS) and transport properties. Although often dismissed as `ideal gas-like' and therefore simple, states occurring in stellar matter are dense plasmas, and the EOS has not been established precisely. EOS constructed using multi-physics approaches found necessary for laboratory studies of warm dense matter give significant variations in stellar regimes, and vary from the EOS commonly used in simulations of the formation and evolution of stars. We have investigated the sensitivity of such simulations to variations in the EOS, for sun-like and low-mass stars, and found a strong sensitivity of the lifetime of the Sun and of the lower luminosity limit for red dwarfs. We also found a significant sensitivity in the lower mass limit for red dwarfs. Simulations of this type are also used for other purposes in astrophysics, including the interpretation of absolute magnitude as mass, the conversion of inferred mass distribution to the initial mass function using predicted lifetimes, simulations of star formation from nebulae, simulations of galactic evolution, and the baryon census used to bound the exotic contribution to dark matter. Although many of the sensitivities of stellar physics to the EOS are large, some of the inferred astrophysical quantities are also constrained by independent measurements, although the constraints may be indirect and non-trivial. However, it may be possible to use such measurements to constrain the EOS more than presently possible by established plasma theory.
△ Less
Submitted 29 June, 2020;
originally announced June 2020.
-
Equations of state for ruthenium and rhodium
Authors:
Damian C. Swift,
Thomas Lockard,
Olivier Heuze,
Mungo Frost,
Siegfried Glenzer,
Kenneth J. McClellan,
Sebastien Hamel,
John E. Klepeis,
Lorin X. Benedict,
Philip A. Sterne,
Graeme J. Ackland
Abstract:
Ru and Rh are interesting cases for comparing equations of state (EOS), because most general purpose EOS are semi-empirical, relying heavily on shock data, and none has been reported for Ru. EOS were calculated for both elements using all-electron atom-in-jellium theory, and cold compression curves were calculated for the common crystal types using the multi-ion pseudopotential approach. Previous…
▽ More
Ru and Rh are interesting cases for comparing equations of state (EOS), because most general purpose EOS are semi-empirical, relying heavily on shock data, and none has been reported for Ru. EOS were calculated for both elements using all-electron atom-in-jellium theory, and cold compression curves were calculated for the common crystal types using the multi-ion pseudopotential approach. Previous EOS constructed for these elements used Thomas-Fermi (TF) theory for the electronic behavior at high temperatures, which neglects electronic shell structure; the atom-in-jellium EOS exhibited pronounced features from the excitation of successive electron shells. Otherwise, the EOS matched surprisingly well, especially considering the lack of experimental data for Ru. The TF-based EOS for Ru may however be inaccurate in the multi-terapascal range needed for some high energy density experiments. The multi-ion calculations predicted that the hexagonal close-packed phase of Ru remains stable to at least 2.5 TPa and possibly 10 TPa, and that its c/a should gradually increase to the ideal value. A method was devised to estimate the variation in Debye temperature from the cold curve, and thus estimate the ion-thermal EOS without requiring relatively expensive dynamical force calculations, in a form convenient for adjusting EOS or phase boundaries. The Debye temperature estimated in this way was similar to the result from atom-in-jellium calculations. We also predict the high-pressure melt loci of both elements.
△ Less
Submitted 11 September, 2019;
originally announced September 2019.
-
Laboratory Calibrations of Fe XII-XIV Line-Intensity Ratios for Electron Density Diagnostics
Authors:
Thusitha P. Arthanayaka,
Peter Beiersdorfer,
Gregory V. Brown,
Ming Feng Gu,
Michael Hahn,
Natalie Hell,
Tom E. Lockard,
Daniel Wolf Savin
Abstract:
We have used an electron beam ion trap to measure electron-density-diagnostic line-intensity ratios for extreme ultraviolet lines from F XII, XIII, and XIV at wavelengths of 185-205 255-276 Angstroms. These ratios can be used as density diagnostics for astrophysical spectra and are especially relevant to solar physics. We found that density diagnostics using the Fe XIII 196.53/202.04 and the Fe XI…
▽ More
We have used an electron beam ion trap to measure electron-density-diagnostic line-intensity ratios for extreme ultraviolet lines from F XII, XIII, and XIV at wavelengths of 185-205 255-276 Angstroms. These ratios can be used as density diagnostics for astrophysical spectra and are especially relevant to solar physics. We found that density diagnostics using the Fe XIII 196.53/202.04 and the Fe XIV 264.79/274.21 and 270.52A/274.21 line ratios are reliable using the atomic data calculated with the Flexible Atomic Code. On the other hand, we found a large discrepancy between the FAC theory and experiment for the commonly used Fe XII (186.85 + 186.88)/195.12 line ratio. These FAC theory calculations give similar results to the data tabulated in CHIANTI, which are commonly used to analyze solar observations. Our results suggest that the discrepancies seen between solar coronal density measurements using the Fe XII (186.85 + 186.88)/195.12 and Fe XIII 196.54/202.04 line ratios are likely due to issues with the atomic calculations for Fe XII.
△ Less
Submitted 21 August, 2019;
originally announced August 2019.
-
Atom-in-jellium equations of state for cryogenic liquids
Authors:
Thomas Lockard,
Marius Millot,
Burkhard Militzer,
Sebastien Hamel,
Lorin X. Benedict,
Philip A. Sterne,
Damian C. Swift
Abstract:
Equations of state (EOS) calculated from a computationally efficient atom-in-jellium treatment of the electronic structure have recently been shown to be consistent with more rigorous path integral Monte Carlo (PIMC) and quantum molecular dynamics (QMD) simulations of metals in the warm dense matter regime. Here we apply the atom-in-jellium model to predict wide-ranging EOS for the cryogenic liqui…
▽ More
Equations of state (EOS) calculated from a computationally efficient atom-in-jellium treatment of the electronic structure have recently been shown to be consistent with more rigorous path integral Monte Carlo (PIMC) and quantum molecular dynamics (QMD) simulations of metals in the warm dense matter regime. Here we apply the atom-in-jellium model to predict wide-ranging EOS for the cryogenic liquid elements nitrogen, oxygen, and fluorine. The principal Hugoniots for these substances were surprisingly consistent with available shock data and Thomas-Fermi (TF) EOS for very high pressures, and exhibited systematic variations from TF associated with shell ionization effects, in good agreement with PIMC, though deviating from QMD and experiment in the molecular regime. The new EOS are accurate much higher in pressure than previous widely-used models for nitrogen and oxygen in particular, and should allow much more accurate predictions for oxides and nitrides in the liquid, vapor, and plasma regime, where these have previously been constructed as mixtures containing the older EOS.
△ Less
Submitted 16 October, 2020; v1 submitted 22 June, 2019;
originally announced June 2019.
-
High pressure melt locus of iron from atom-in-jellium calculations
Authors:
Damian C. Swift,
Thomas Lockard,
Raymond F. Smith,
Christine J. Wu,
Lorin X. Benedict
Abstract:
Although usually considered as a technique for predicting electron states in dense plasmas, atom-in-jellium calculations can be used to predict the mean displacement of the ion from its equilibrium position in colder matter, as a function of compression and temperature. The Lindemann criterion of a critical displacement for melting can then be employed to predict the melt locus, normalizing for in…
▽ More
Although usually considered as a technique for predicting electron states in dense plasmas, atom-in-jellium calculations can be used to predict the mean displacement of the ion from its equilibrium position in colder matter, as a function of compression and temperature. The Lindemann criterion of a critical displacement for melting can then be employed to predict the melt locus, normalizing for instance to the observed melt temperature or to more direct simulations such as molecular dynamics (MD). This approach reproduces the high pressure melting behavior of Al as calculated using the Lindemann model and thermal vibrations in the solid. Applied to Fe, we find that it reproduces the limited-range melt locus of a multiphase equation of state (EOS) and the results of ab initio MD simulations, and agrees less well with a Lindemann construction using an older EOS. The resulting melt locus lies significantly above the older melt locus for pressures above 1.5\,TPa, but is closer to recent ab initio MD results and extrapolations of an analytic fit to them. This study confirms the importance of core freezing in massive exoplanets, predicting that a slightly smaller range of exoplanets than previously assessed would be likely to exhibit dynamo generation of magnetic fields by convection in the liquid portion of the core.
△ Less
Submitted 11 June, 2019;
originally announced June 2019.
-
High temperature ion-thermal behavior from average-atom calculations
Authors:
Damian C. Swift,
Mandy Bethkenhagen,
Alfredo A. Correa,
Thomas Lockard,
Sebastien Hamel,
Lorin X. Benedict,
Philip A. Sterne,
Bard I. Bennett
Abstract:
Atom-in-jellium calculations of the Einstein frequency were used to calculate the mean displacement of an ion over a wide range of compression and temperature. Expressed as a fraction of the Wigner-Seitz radius, the displacement is a measure of the asymptotic freedom of the ion at high temperature, and thus of the change in heat capacity from 6 to 3 quadratic degrees of freedom per atom. A functio…
▽ More
Atom-in-jellium calculations of the Einstein frequency were used to calculate the mean displacement of an ion over a wide range of compression and temperature. Expressed as a fraction of the Wigner-Seitz radius, the displacement is a measure of the asymptotic freedom of the ion at high temperature, and thus of the change in heat capacity from 6 to 3 quadratic degrees of freedom per atom. A functional form for free energy was proposed based on the Maxwell-Boltzmann distribution as a correction to the Debye free energy, with a single free parameter representing the effective density of potential modes to be saturated. This parameter was investigated using molecular dynamics simulations, and found to be ~0.2 per atom. In this way, the ion-thermal contribution can be calculated for a wide-range equation of state (EOS) without requiring a large number of molecular dynamics simulations. Example calculations were performed for carbon, including the sensitivity of key EOS loci to ionic freedom.
△ Less
Submitted 21 May, 2019;
originally announced May 2019.
-
Atom-in-jellium equations of state in the high energy density regime
Authors:
Damian C. Swift,
Thomas Lockard,
Richard G. Kraus,
Lorin X. Benedict,
Philip A. Sterne,
Mandy Bethkenhagen,
Sebastien Hamel,
Bard I. Bennett
Abstract:
Recent path-integral Monte Carlo and quantum molecular dynamics simulations have shown that computationally efficient average-atom models can predict thermodynamic states in warm dense matter to within a few percent. One such atom-in-jellium model has typically been used to predict the electron-thermal behavior only, although it was previously developed to predict the entire equation of state (EOS…
▽ More
Recent path-integral Monte Carlo and quantum molecular dynamics simulations have shown that computationally efficient average-atom models can predict thermodynamic states in warm dense matter to within a few percent. One such atom-in-jellium model has typically been used to predict the electron-thermal behavior only, although it was previously developed to predict the entire equation of state (EOS). We report completely atom-in-jellium EOS calculations for Be, Al, Si, Fe, and Mo, as elements representative of a range of atomic number and low-pressure electronic structure. Comparing the more recent method of pseudo-atom molecular dynamics, atom-in-jellium results were similar: sometimes less accurate, sometimes more. All these techniques exhibited pronounced effects of electronic shell structure in the shock Hugoniot which are not captured by Thomas-Fermi based EOS. These results demonstrate the value of a hierarchical approach to EOS construction, using average-atom techniques with shell structure to populate a wide-range EOS surface efficiently, complemented by more rigorous 3D multi-atom calculations to validate and adjust the EOS.
△ Less
Submitted 1 March, 2019;
originally announced March 2019.
-
High-resolution Charge Exchange Spectra with L-shell Nickel Show Striking Differences from Models
Authors:
G. L. Betancourt-Martinez,
P. Beiersdorfer,
G. V. Brown,
R. S. Cumbee,
N. Hell,
R. L. Kelley,
C. A. Kilbourne,
M. A. Leutenegger,
T. E. Lockard,
F. S. Porter
Abstract:
We present the first high-resolution laboratory spectra of X-ray emission following L-shell charge exchange between nickel ions and neutral H2 and He. We employ the commonly used charge exchange models found in XSPEC and SPEX, ACX and SPEX-CX, to simulate our experimental results. We show that significant differences between data and models exist in both line energies and strengths. In particular,…
▽ More
We present the first high-resolution laboratory spectra of X-ray emission following L-shell charge exchange between nickel ions and neutral H2 and He. We employ the commonly used charge exchange models found in XSPEC and SPEX, ACX and SPEX-CX, to simulate our experimental results. We show that significant differences between data and models exist in both line energies and strengths. In particular, we find that configuration mixing may play an important role in generating lines from core-excited states, and may be improperly treated in models. Our results indicate that if applied to astrophysical data, these models may lead to incorrect assumptions of the physical and chemical parameters of the region of interest.
△ Less
Submitted 29 November, 2018;
originally announced November 2018.