-
Uncertainties and Design of Active Aerodynamic Attitude Control in Very Low Earth Orbit
Authors:
Sabrina Livadiotti,
Nicholas H. Crisp,
Peter C. E. Roberts,
Vitor T. A. Oiko,
Simon Christensen,
Rosa Maria Dominguez,
Georg H. Herdrich
Abstract:
This paper discusses the design and the performance achievable with active aerodynamic attitude control in very low Earth orbit, i.e. below 450 km in altitude. A novel real-time algorithm is proposed for selecting the angles of deflection of aerodynamic actuators providing the closest match to the control signal computed by a selected control law. The algorithm is based on a panel method for the c…
▽ More
This paper discusses the design and the performance achievable with active aerodynamic attitude control in very low Earth orbit, i.e. below 450 km in altitude. A novel real-time algorithm is proposed for selecting the angles of deflection of aerodynamic actuators providing the closest match to the control signal computed by a selected control law. The algorithm is based on a panel method for the computation of the aerodynamic coefficients and relies on approximate environmental parameters estimation and worst-case scenario assumptions for the re-emission properties of space materials. Discussion of results is performed by assuming two representative pointing manoeuvres, for which momentum wheels and aerodynamic actuators are used synergistically. A quaternion feedback PID controller implemented in discrete time is assumed to determine the control signal at a sampling frequency of 1 Hz. The outcome of a Monte Carlo analysis, performed for a wide range of orbital conditions, shows that the target attitude is successfully achieved for the vast majority of the cases, thus proving the robustness of the approach in the presence of environmental uncertainties and realistic attitude hardware limitations.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
Intake Design for an Atmosphere-Breathing Electric Propulsion System (ABEP)
Authors:
F. Romano,
J. Espinosa-Orozco,
M. Pfeiffer,
G. Herdrich,
N. H. Crisp,
P. C. E. Roberts,
B. E. A. Holmes,
S. Edmondson,
S. Haigh,
S. Livadiotti,
A. Macario-Rojas,
V. T. A. Oiko,
L. A. Sinpetru,
K. Smith,
J. Becedas,
V. Sulliotti-Linner,
M. Bisgaard,
S. Christensen,
V. Hanessian,
T. Kauffman Jensen,
J. Nielsen,
Y. -A. Chan,
S. Fasoulas,
C. Traub,
D. García-Almiñana
, et al. (7 additional authors not shown)
Abstract:
Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamic drag on the spacecraft. To extend the lifetime of such missions, an efficient propulsion system is required. One solution is Atmosphere-Breathing Electric Propulsion (ABEP) that collects atmospheric particles to be used as propellant for an electric thruster. The system would minimize the…
▽ More
Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamic drag on the spacecraft. To extend the lifetime of such missions, an efficient propulsion system is required. One solution is Atmosphere-Breathing Electric Propulsion (ABEP) that collects atmospheric particles to be used as propellant for an electric thruster. The system would minimize the requirement of limited propellant availability and can also be applied to any planetary body with atmosphere, enabling new missions at low altitude ranges for longer times. IRS is develo**, within the H2020 DISCOVERER project, an intake and a thruster for an ABEP system. The article describes the design and simulation of the intake, optimized to feed the radio frequency (RF) Helicon-based plasma thruster developed at IRS. The article deals in particular with the design of intakes based on diffuse and specular reflecting materials, which are analysed by the PICLas DSMC-PIC tool. Orbital altitudes $h=150-250$ km and the respective species based on the NRLMSISE-00 model (O, $N_2$, $O_2$, He, Ar, H, N) are investigated for several concepts based on fully diffuse and specular scattering, including hybrid designs. The major focus has been on the intake efficiency defined as $η_c=\dot{N}_{out}/\dot{N}_{in}$, with $\dot{N}_{in}$ the incoming particle flux, and $\dot{N}_{out}$ the one collected by the intake. Finally, two concepts are selected and presented providing the best expected performance for the operation with the selected thruster. The first one is based on fully diffuse accommodation yielding to $η_c<0.46$ and the second one based un fully specular accommodation yielding to $η_c<0.94$. Finally, also the influence of misalignment with the flow is analysed, highlighting a strong dependence of $η_c$ in the diffuse-based intake while, ...
△ Less
Submitted 1 July, 2021; v1 submitted 30 June, 2021;
originally announced June 2021.
-
ADBSat: Methodology of a novel panel method tool for aerodynamic analysis of satellites
Authors:
Luciana A. Sinpetru,
Nicholas H. Crisp,
David Mostaza-Prieto,
Sabrina Livadiotti,
Peter C. E. Roberts
Abstract:
ADBSat is a novel software that determines the aerodynamic properties of any body in free-molecular flow. Its main advantage is the fast approximation of the aerodynamics of spacecraft in the lower end of the low-Earth orbit altitude range. It is a novel implementation of a panel method, where the body is represented as a set of fundamental elements and the sum of their individual aerodynamic prop…
▽ More
ADBSat is a novel software that determines the aerodynamic properties of any body in free-molecular flow. Its main advantage is the fast approximation of the aerodynamics of spacecraft in the lower end of the low-Earth orbit altitude range. It is a novel implementation of a panel method, where the body is represented as a set of fundamental elements and the sum of their individual aerodynamic properties makes up the properties of the whole. ADBSat's approach treats the shape as a set of flat triangular plates. These are read from a CAD geometry file in the Wavefront format, which can be created with most common CAD programs. A choice of gas-surface interaction models is available to represent the physics of free-molecular flow under different conditions. Its modular design means that other models can be easily and quickly implemented. It also benefits from a new shading algorithm for fast determination of elemental flow exposure. An example case is presented to show the capability and functionality of the program.
△ Less
Submitted 22 February, 2022; v1 submitted 12 April, 2021;
originally announced April 2021.
-
In-Orbit Aerodynamic Coefficient Measurements using SOAR (Satellite for Orbital Aerodynamics Research)
Authors:
N. H. Crisp,
P. C. E. Roberts,
S. Livadiotti,
A. Macario Rojas,
V. T. A. Oiko,
S. Edmondson,
S. J. Haigh,
B. E. A. Holmes,
L. A. Sinpetru,
K. L. Smith,
J. Becedas,
R. M. Dominguez,
V. Sulliotti-Linner,
S. Christensen,
J. Nielsen,
M. Bisgaard,
Y-A. Chan,
S. Fasoulas,
G. H. Herdrich,
F. Romano,
C. Traub,
D. Garcia-Alminana,
S. Rodriguez-Donaire,
M. Sureda,
D. Kataria
, et al. (4 additional authors not shown)
Abstract:
The Satellite for Orbital Aerodynamics Research (SOAR) is a CubeSat mission, due to be launched in 2021, to investigate the interaction between different materials and the atmospheric flow regime in very low Earth orbits (VLEO). Improving knowledge of the gas-surface interactions at these altitudes and identification of novel materials that can minimise drag or improve aerodynamic control are impo…
▽ More
The Satellite for Orbital Aerodynamics Research (SOAR) is a CubeSat mission, due to be launched in 2021, to investigate the interaction between different materials and the atmospheric flow regime in very low Earth orbits (VLEO). Improving knowledge of the gas-surface interactions at these altitudes and identification of novel materials that can minimise drag or improve aerodynamic control are important for the design of future spacecraft that can operate in lower altitude orbits. Such satellites may be smaller and cheaper to develop or can provide improved Earth observation data or communications link-budgets and latency. Using precise orbit and attitude determination information and the measured atmospheric flow characteristics the forces and torques experienced by the satellite in orbit can be studied and estimates of the aerodynamic coefficients calculated. This paper presents the scientific concept and design of the SOAR mission. The methodology for recovery of the aerodynamic coefficients from the measured orbit, attitude, and in-situ atmospheric data using a least-squares orbit determination and free-parameter fitting process is described and the experimental uncertainty of the resolved aerodynamic coefficients is estimated. The presented results indicate that the combination of the satellite design and experimental methodology are capable of clearly illustrating the variation of drag and lift coefficient for differing surface incidence angle. The lowest uncertainties for the drag coefficient measurement are found at approximately 300 km, whilst the measurement of lift coefficient improves for reducing orbital altitude to 200 km.
△ Less
Submitted 17 December, 2020; v1 submitted 14 December, 2020;
originally announced December 2020.
-
A Review of Gas-Surface Interaction Models for Orbital Aerodynamics Applications
Authors:
Sabrina Livadiotti,
Nicholas H. Crisp,
Peter C. E. Roberts,
Stephen D. Worrall,
Vitor T. A. Oiko,
Steve Edmondson,
Sarah J. Haigh,
Claire Huyton,
Katharine L. Smith,
Luciana A. Sinpetru,
Brandon E. A. Holmes,
Jonathan Becedas,
Rosa María Domínguez,
Valentín Cañas,
Simon Christensen,
Anders Mølgaard,
Jens Nielsen,
Morten Bisgaard,
Yung-An Chan,
Georg H. Herdrich,
Francesco Romano,
Stefanos Fasoulas,
Constantin Traub,
Daniel Garcia-Almiñana,
Silvia Rodriguez-Donaire
, et al. (7 additional authors not shown)
Abstract:
Renewed interest in Very Low Earth Orbits (VLEO) - i.e. altitudes below 450 km - has led to an increased demand for accurate environment characterisation and aerodynamic force prediction. While the former requires knowledge of the mechanisms that drive density variations in the thermosphere, the latter also depends on the interactions between the gas-particles in the residual atmosphere and the su…
▽ More
Renewed interest in Very Low Earth Orbits (VLEO) - i.e. altitudes below 450 km - has led to an increased demand for accurate environment characterisation and aerodynamic force prediction. While the former requires knowledge of the mechanisms that drive density variations in the thermosphere, the latter also depends on the interactions between the gas-particles in the residual atmosphere and the surfaces exposed to the flow. The determination of the aerodynamic coefficients is hindered by the numerous uncertainties that characterise the physical processes occurring at the exposed surfaces. Several models have been produced over the last 60 years with the intent of combining accuracy with relatively simple implementations. In this paper the most popular models have been selected and reviewed using as discriminating factors relevance with regards to orbital aerodynamics applications and theoretical agreement with gas-beam experimental data. More sophisticated models were neglected, since their increased accuracy is generally accompanied by a substantial increase in computation times which is likely to be unsuitable for most space engineering applications. For the sake of clarity, a distinction was introduced between physical and scattering kernel theory based gas-surface interaction models. The physical model category comprises the Hard Cube model, the Soft Cube model and the Washboard model, while the scattering kernel family consists of the Maxwell model, the Nocilla-Hurlbut-Sherman model and the Cercignani-Lampis-Lord model. Limits and assets of each model have been discussed with regards to the context of this paper. Wherever possible, comments have been provided to help the reader to identify possible future challenges for gas-surface interaction science with regards to orbital aerodynamic applications.
△ Less
Submitted 22 November, 2020; v1 submitted 1 October, 2020;
originally announced October 2020.
-
The Benefits of Very Low Earth Orbit for Earth Observation Missions
Authors:
N. H. Crisp,
P. C. E. Roberts,
S. Livadiotti,
V. T. A. Oiko,
S. Edmondson,
S. J. Haigh,
C. Huyton,
L. Sinpetru,
K. L. Smith,
S. D. Worrall,
J. Becedas,
R. M. Domínguez,
D. González,
V. Hanessian,
A. Mølgaard,
J. Nielsen,
M. Bisgaard,
Y. -A. Chan,
S. Fasoulas,
G. H. Herdrich,
F. Romano,
C. Traub,
D. García-Almiñana,
S. Rodríguez-Donaire,
M. Sureda
, et al. (8 additional authors not shown)
Abstract:
Very low Earth orbits (VLEO), typically classified as orbits below approximately 450 km in altitude, have the potential to provide significant benefits to spacecraft over those that operate in higher altitude orbits. This paper provides a comprehensive review and analysis of these benefits to spacecraft operations in VLEO, with parametric investigation of those which apply specifically to Earth ob…
▽ More
Very low Earth orbits (VLEO), typically classified as orbits below approximately 450 km in altitude, have the potential to provide significant benefits to spacecraft over those that operate in higher altitude orbits. This paper provides a comprehensive review and analysis of these benefits to spacecraft operations in VLEO, with parametric investigation of those which apply specifically to Earth observation missions. The most significant benefit for optical imaging systems is that a reduction in orbital altitude improves spatial resolution for a similar payload specification. Alternatively mass and volume savings can be made whilst maintaining a given performance. Similarly, for radar and lidar systems, the signal-to-noise ratio can be improved. Additional benefits include improved geospatial position accuracy, improvements in communications link-budgets, and greater launch vehicle insertion capability. The collision risk with orbital debris and radiation environment can be shown to be improved in lower altitude orbits, whilst compliance with IADC guidelines for spacecraft post-mission lifetime and deorbit is also assisted. Finally, VLEO offers opportunities to exploit novel atmosphere-breathing electric propulsion systems and aerodynamic attitude and orbit control methods.
However, key challenges associated with our understanding of the lower thermosphere, aerodynamic drag, the requirement to provide a meaningful orbital lifetime whilst minimising spacecraft mass and complexity, and atomic oxygen erosion still require further research. Given the scope for significant commercial, societal, and environmental impact which can be realised with higher performing Earth observation platforms, renewed research efforts to address the challenges associated with VLEO operations are required.
△ Less
Submitted 16 July, 2020; v1 submitted 15 July, 2020;
originally announced July 2020.
-
RF Helicon-based Inductive Plasma Thruster (IPT) Design for an Atmosphere-Breathing Electric Propulsion system (ABEP)
Authors:
Francesco Romano,
Yung-An Chan,
Georg Herdrich,
Peter C. E. Roberts,
C. Traub S. Fasoulas,
K. Smith,
S. Edmondson,
S. Haigh,
N. H. Crisp,
V. T. A. Oiko,
S. D. Worrall,
S. Livadiotti,
C. Huyton,
L. A. Sinpetru,
A. Straker,
J. Becedas,
R. M. Domínguez,
D. González,
V. Cañas,
V. Sulliotti-Linner,
V. Hanessian,
A. Mølgaard,
J. Nielsen,
M. Bisgaard,
D. Garcia-Almiñana
, et al. (10 additional authors not shown)
Abstract:
Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamic drag on the spacecraft. To extend such missions lifetime, an efficient propulsion system is required. One solution is Atmosphere-Breathing Electric Propulsion (ABEP). It collects atmospheric particles to be used as propellant for an electric thruster. The system would minimize the requirem…
▽ More
Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamic drag on the spacecraft. To extend such missions lifetime, an efficient propulsion system is required. One solution is Atmosphere-Breathing Electric Propulsion (ABEP). It collects atmospheric particles to be used as propellant for an electric thruster. The system would minimize the requirement of limited propellant availability and can also be applied to any planet with atmosphere, enabling new mission at low altitude ranges for longer times. Challenging is also the presence of reactive chemical species, such as atomic oxygen in Earth orbit. Such species cause erosion of (not only) propulsion system components, i.e. acceleration grids, electrodes, and discharge channels of conventional EP systems. IRS is develo** within the DISCOVERER project, an intake and a thruster for an ABEP system. The paper describes the design and implementation of the RF helicon-based inductive plasma thruster (IPT). This paper deals in particular with the design and implementation of a novel antenna called the birdcage antenna, a device well known in magnetic resonance imaging (MRI), and also lately employed for helicon-wave based plasma sources in fusion research. The IPT is based on RF electrodeless operation aided by an externally applied static magnetic field. The IPT is composed by an antenna, a discharge channel, a movable injector, and a solenoid. By changing the operational parameters along with the novel antenna design, the aim is to minimize losses in the RF circuit, and accelerate a quasi-neutral plasma plume. This is also to be aided by the formation of helicon waves within the plasma that are to improve the overall efficiency and achieve higher exhaust velocities. Finally, the designed IPT with a particular focus on the birdcage antenna design procedure is presented
△ Less
Submitted 14 July, 2020; v1 submitted 13 July, 2020;
originally announced July 2020.
-
A Semi-Analytical Method for Calculating Revisit Time for Satellite Constellations with Discontinuous Coverage
Authors:
Nicholas H. Crisp,
Sabrina Livadiotti,
Peter C. E. Roberts
Abstract:
This paper presents a unique approach to the problem of calculating revisit time metrics for different satellite orbits, sensor geometries, and constellation configurations with application to early lifecycle design and optimisation processes for Earth observation missions. The developed semi-analytical approach uses an elliptical projected footprint geometry to provide an accuracy similar to that…
▽ More
This paper presents a unique approach to the problem of calculating revisit time metrics for different satellite orbits, sensor geometries, and constellation configurations with application to early lifecycle design and optimisation processes for Earth observation missions. The developed semi-analytical approach uses an elliptical projected footprint geometry to provide an accuracy similar to that of industry standard numerical orbit simulation software but with an efficiency of published analytical methods. Using the developed method, extensive plots of maximum revisit time are presented for varying altitude, inclination, target latitudes, sensor capabilities, and constellation configuration, providing valuable reference for Earth observation system design.
△ Less
Submitted 5 July, 2018;
originally announced July 2018.
