Showing 1–50 of 98 results for author: Lipson, M

N-Way Frequency Beamsplitter for Quantum Photonics

Authors: Richard Oliver, Miri Blau, Chaitali Joshi, Xingchen Ji, Ricardo Gutierrez-Jauregui, Ana Asenjo-Garcia, Michal Lipson, Alexander L. Gaeta

Abstract: Optical networks are the leading platform for the transfer of information due to their low loss and ability to scale to many information channels using optical frequency modes. To fully leverage the quantum properties of light in this platform, it is desired to manipulate higher-dimensional superpositions by orchestrating linear, beamsplitter-type interactions between several channels simultaneous… ▽ More Optical networks are the leading platform for the transfer of information due to their low loss and ability to scale to many information channels using optical frequency modes. To fully leverage the quantum properties of light in this platform, it is desired to manipulate higher-dimensional superpositions by orchestrating linear, beamsplitter-type interactions between several channels simultaneously. We propose a method of achieving simultaneous, all-to-all coupling between N optical frequency modes via N-way Bragg-scattering four-wave mixing. By exploiting the frequency degree of freedom, additional modes can be multiplexed in an interaction medium of fixed volume and loss, avoiding the introduction of excess noise. We generalize the theory of the frequency-encoded two-mode interaction to N modes under this four-wave mixing approach and experimentally verify the quantum nature of this scheme by demonstrating three-way multiphoton interference. The two input photons are shared among three frequency modes and display interference differing from that of two classical (coherent-state) inputs. These results show the potential of our approach for the scalability of photonic quantum information processing to general N-mode systems in the frequency domain. △ Less

Submitted 15 May, 2024; v1 submitted 3 May, 2024; originally announced May 2024.

All-optical frequency division on-chip using a single laser

Authors: Yun Zhao, Jae K. Jang, Karl J. McNulty, Xingchen Ji, Yoshitomo Okawachi, Michal Lipson, Alexander L. Gaeta

Abstract: The generation of spectrally pure high-frequency microwave signals is a critical functionality in fundamental and applied sciences, including metrology and communications. The development of optical frequency combs has enabled the powerful technique of optical frequency division (OFD) to produce microwave oscillations of the highest quality. The approaches for OFD demonstrated to date demand multi… ▽ More The generation of spectrally pure high-frequency microwave signals is a critical functionality in fundamental and applied sciences, including metrology and communications. The development of optical frequency combs has enabled the powerful technique of optical frequency division (OFD) to produce microwave oscillations of the highest quality. The approaches for OFD demonstrated to date demand multiple lasers with space- and energy-consuming optical stabilization and electronic feedback components, resulting in device footprints incompatible with integration into a compact and robust photonic platform. Here, we demonstrate all-optical OFD on a single photonic chip driven with a single continuous-wave laser. We generate a dual-point frequency reference using the beat frequency of the signal and idler fields from a microresonator-based optical parametric oscillator (OPO), which achieves high phase stability due to the inherently strong signal-idler frequency correlations. We implement OFD by optically injecting the signal and idler fields from the OPO to a Kerr-comb microresonator on the same chip. We show that the two distinct dynamical states of Kerr cavities can be passively synchronized, allowing broadband frequency locking of the comb state, which transfers the stability of the OPO frequencies to the repetition rate of the Kerr comb. A 630-fold phase-noise reduction is observed when the Kerr comb is synchronized to the OPO, which represents the lowest noise generated on the silicon-nitride platform. Our work demonstrates a simple, effective approach for performing OFD and provides a pathway toward chip-scale devices that can generate microwave frequencies comparable to the purest tones produced in metrological laboratories. This technology can significantly boost the further development of data communications and microwave sensing. △ Less

Submitted 5 March, 2023; originally announced March 2023.

Comments: 17 pages, 8 figures

Ultra-Low-Loss Silicon Nitride Photonics Based on Deposited Films Compatible with Foundries

Authors: Xingchen Ji, Yoshitomo Okawachi, Andres Gil-Molina, Mateus Corato-Zanarella, Samantha Roberts, Alexander L. Gaeta, Michal Lipson

Abstract: The fabrication processes of silicon nitride photonic devices used in foundries require low temperature deposition, which typically leads to high propagation losses. Here, we show that propagation loss as low as 0.42 dB/cm can be achieved using foundry compatible processes by solely reducing waveguide surface roughness. By post-processing the fabricated devices using rapid thermal anneal (RTA) and… ▽ More The fabrication processes of silicon nitride photonic devices used in foundries require low temperature deposition, which typically leads to high propagation losses. Here, we show that propagation loss as low as 0.42 dB/cm can be achieved using foundry compatible processes by solely reducing waveguide surface roughness. By post-processing the fabricated devices using rapid thermal anneal (RTA) and furnace anneal, we achieve propagation losses down to 0.28 dB/cm and 0.06 dB/cm, respectively. These low losses are comparable to the conventional devices using high temperature, high-stress low-pressure chemical vapor deposition (LPCVD) films. We also tune the dispersion of the devices, and proved that these devices can be used for linear and nonlinear applications. Low threshold parametric oscillation, broadband frequency combs and narrow-linewidth laser are demonstrated. Our work demonstrates the feasibility of scalable photonic systems based on foundries. △ Less

Submitted 8 January, 2023; originally announced January 2023.

Journal ref: Laser & Photonics Reviews (2022)

2D material platform for overcoming the amplitude-phase tradeoff in ring modulators

Authors: Ipshita Datta, Andres Gil-Molina, Sang Hoon Chae, James Hone, Michal Lipson

Abstract: Compact, high-speed electro-optic phase modulators play a vital role in various large-scale applications including phased arrays, quantum and neural networks, and optical communication links. Conventional phase modulators suffer from a fundamental tradeoff between device length and optical loss that limits their scaling capabilities. High-finesse ring resonators have been traditionally used as com… ▽ More Compact, high-speed electro-optic phase modulators play a vital role in various large-scale applications including phased arrays, quantum and neural networks, and optical communication links. Conventional phase modulators suffer from a fundamental tradeoff between device length and optical loss that limits their scaling capabilities. High-finesse ring resonators have been traditionally used as compact intensity modulators, but their use for phase modulation have been limited due to the high insertion loss associated with the phase change. Here, we show that high-finesse resonators can achieve a strong phase change with low insertion loss by simultaneous modulation of the real and imaginary parts of the refractive index, to the same extent i.e. $\frac{Δn}{Δk} \sim 1$. To implement this strategy, we utilize a hybrid platform that combines a low-loss SiN ring resonator with electro-absorptive graphene (Gr) and electro-refractive WSe$_2$. We achieve a phase modulation efficiency ($V_{\fracπ{2}} \cdot L_{\fracπ{2}}$) of 0.045 V $\cdot$ cm with an insertion loss (IL$_{\fracπ{2}}$) of 4.7 dB for a phase change of $\fracπ{2}$ radians, in a 25 $μ$m long Gr-Al$_2$O$_3$-WSe$_2$ capacitor embedded on a SiN ring of 50 $μ$m radius. We find that our Gr-Al$_2$O$_3$-WSe$_2$ capacitor can support an electro-optic bandwidth of 14.9 $\pm$ 0.1 GHz. We further show that the $V_{\fracπ{2}} \cdot L_{\fracπ{2}}$ of our SiN-2D platform is at least an order of magnitude lower than that of electro-optic phase modulators based on silicon, III-V on silicon, graphene on silicon and lithium niobate. This SiN-2D hybrid platform provides the impetus to design compact and high-speed reconfigurable circuits with graphene and transition metal dichalcogenide (TMD) monolayers that can enable large-scale photonic systems. △ Less

Submitted 1 December, 2022; v1 submitted 17 September, 2022; originally announced September 2022.

Large regenerative parametric amplification on chip at ultra-low pump powers

Authors: Yun Zhao, Jae K. Jang, Xingchen Ji, Yoshitomo Okawachi, Michal Lipson, Alexander L. Gaeta

Abstract: Chip-based optical amplifiers can significantly expand the functionalities of photonic devices. In particular, optical-parametric amplifiers (OPAs), with engineerable gain-spectra, are well-suited for nonlinear-photonic applications. Chip-based OPAs typically require long waveguides that occupy a large footprint, and high pump powers that cannot be easily produced with chip-scale lasers. We theore… ▽ More Chip-based optical amplifiers can significantly expand the functionalities of photonic devices. In particular, optical-parametric amplifiers (OPAs), with engineerable gain-spectra, are well-suited for nonlinear-photonic applications. Chip-based OPAs typically require long waveguides that occupy a large footprint, and high pump powers that cannot be easily produced with chip-scale lasers. We theoretically and experimentally demonstrate a microresonator-assisted regenerative OPA that benefits from the large nonlinearity enhancement of microresonators and yields a high gain in a small footprint. We achieve 30-dB parametric gain with only 9 mW of cw-pump power and show that the gain spectrum can be engineered to cover telecom channels inaccessible with Er-based amplifiers. We further demonstrate the amplification of Kerr-soliton comb lines and the preservation of their phase properties. Additionally, we demonstrate amplification by injection locking of optical-parametric oscillators, which corresponds to a regenerative amplifier pumped above the oscillation threshold. Novel dispersion engineering techniques such as coupled cavities and higher-order-dispersion phase matching can further extend the tunability and spectral coverage of our amplification schemes. The combination of high gain, small footprint, low pump power, and flexible gain-spectra engineering of our regenerative OPA is ideal for amplifying signals from the nanowatt to microwatt regimes for portable or space-based devices where ultralow electrical power levels are required and can lead to important applications in on-chip optical- and microwave-frequency synthesis and precise timekee**. △ Less

Submitted 5 March, 2023; v1 submitted 12 September, 2022; originally announced September 2022.

Comments: 16 pages, 10 figures

High Power on-chip Integrated Laser

Authors: Yair Antman, Andres Gil-Molina, Ohad Westreich, Xingchen Ji, Alexander L. Gaeta, Michal Lipson

Abstract: The lack of high power integrated lasers have been limiting silicon photonics. Despite much progress made in chip-scale laser integration, power remains below the level required for key applications. The main inhibiting factor for high power is the low energy efficiency at high pum** currents, dictated by the small size of the active device. Here we break this power limitation by demonstrating a… ▽ More The lack of high power integrated lasers have been limiting silicon photonics. Despite much progress made in chip-scale laser integration, power remains below the level required for key applications. The main inhibiting factor for high power is the low energy efficiency at high pum** currents, dictated by the small size of the active device. Here we break this power limitation by demonstrating a platform that relies on the coupling of a broad-area multimode gain to a silicon-nitride feedback chip, which acts as an external cavity. The feedback provided by the silicon-nitride chip is routed through a ring resonator and a single-mode filter, thus causing the otherwise multimode-gain chip to concentrate its power into a single highly-coherent mode. Our device produces more than 150 mW of power and 400 kHz linewidth. We achieve these high-performance metrics while maintaining a small footprint of 3 mm^2. △ Less

Submitted 13 July, 2022; originally announced July 2022.

Fabrication-Robust Silicon Photonic Devices in Standard Sub-Micron Silicon-on-Insulator Processes

Authors: Anthony Rizzo, Utsav Dave, Asher Novick, Alexandre Freitas, Samantha P. Roberts, Aneek James, Michal Lipson, Keren Bergman

Abstract: Perturbations to the effective refractive index from nanometer-scale fabrication variations in waveguide geometry plague high index-contrast photonic platforms including the ubiquitous sub-micron silicon-on-insulator (SOI) process. Such variations are particularly troublesome for phase-sensitive devices such as interferometers and resonators, which exhibit drastic changes in performance as a resul… ▽ More Perturbations to the effective refractive index from nanometer-scale fabrication variations in waveguide geometry plague high index-contrast photonic platforms including the ubiquitous sub-micron silicon-on-insulator (SOI) process. Such variations are particularly troublesome for phase-sensitive devices such as interferometers and resonators, which exhibit drastic changes in performance as a result of these fabrication-induced phase errors. In this Letter, we propose and experimentally demonstrate a design methodology for dramatically reducing device sensitivity to silicon width variations. We apply this methodology to a highly phase-sensitive device, the ring-assisted Mach Zehnder interferometer (RAMZI), and show comparable performance and footprint to state-of-the-art devices while substantially reducing stochastic phase errors from etch variations. This decrease in sensitivity is directly realized as energy savings by significantly lowering the required corrective thermal tuning power, providing a promising path towards ultra-energy-efficient large-scale silicon photonic circuits. △ Less

Submitted 23 May, 2022; originally announced May 2022.

Integrated Kerr frequency comb-driven silicon photonic transmitter

Authors: Anthony Rizzo, Asher Novick, Vignesh Gopal, Bok Young Kim, Xingchen Ji, Stuart Daudlin, Yoshitomo Okawachi, Qixiang Cheng, Michal Lipson, Alexander L. Gaeta, Keren Bergman

Abstract: The exponential growth of computing needs for artificial intelligence and machine learning has had a dramatic impact on data centre energy consumption, which has risen to environmentally significant levels. Using light to send information between compute nodes can dramatically decrease this energy consumption while simultaneously increasing bandwidth. Through wavelength-division multiplexing with… ▽ More The exponential growth of computing needs for artificial intelligence and machine learning has had a dramatic impact on data centre energy consumption, which has risen to environmentally significant levels. Using light to send information between compute nodes can dramatically decrease this energy consumption while simultaneously increasing bandwidth. Through wavelength-division multiplexing with chip-based microresonator Kerr frequency combs, independent information channels can be encoded onto many distinct colours of light in the same optical fibre for massively parallel data transmission with low energy. While previous demonstrations have relied on benchtop equipment for filtering and modulating Kerr comb wavelength channels, data centre interconnects require a compact on-chip form factor for these operations. Here, we demonstrate the first integrated silicon photonic transmitter using a Kerr comb source. The demonstrated architecture is scalable to hundreds of wavelength channels, enabling a fundamentally new class of massively parallel terabit-scale optical interconnects for future green hyperscale data centres. △ Less

Submitted 8 September, 2021; originally announced September 2021.

Widely tunable and narrow linewidth chip-scale lasers from deep visible to near-IR

Authors: Mateus Corato-Zanarella, Andres Gil-Molina, Xingchen Ji, Min Chul Shin, Aseema Mohanty, Michal Lipson

Abstract: Widely-tunable and narrow-linewidth integrated lasers across all visible wavelengths are necessary to enable on-chip technologies such as quantum photonics, optical trap**, and biophotonics. However, such lasers have not been realized due to the strong wavelength sensitivity and high loss of integrated optical devices at short wavelengths. Here we overcome these challenges and demonstrate a chip… ▽ More Widely-tunable and narrow-linewidth integrated lasers across all visible wavelengths are necessary to enable on-chip technologies such as quantum photonics, optical trap**, and biophotonics. However, such lasers have not been realized due to the strong wavelength sensitivity and high loss of integrated optical devices at short wavelengths. Here we overcome these challenges and demonstrate a chip-scale visible lasers platform by using tightly-confined, micrometer-scale silicon nitride resonators and commercial Fabry-Perot laser diodes. We achieve tunable and narrow-linewidth lasing in the deep blue (450 nm), blue (488 nm), green (520 nm), red (660 nm) and near-IR (785 nm) with coarse tuning up to 12 nm, fine tuning up to 33.9 GHz, linewidth down to sub-kHz, side-mode suppression ratio > 35 dB, and fiber-coupled power up to 10 mW. These specifications of our chip-scale lasers are comparable to those of state-of-the-art commercial laser systems, making them stand out as powerful tools for the next generation of visible-light technologies. △ Less

Submitted 16 September, 2021; originally announced September 2021.

Tunable narrow linewidth chip-scale mid-IR laser

Authors: Euijae Shim, Andres Gil-Molina, Ohad Westreich, Yamac Dikmelik, Kevin Lascola, Alexander L. Gaeta, Michal Lipson

Abstract: Portable mid-infrared (mid-IR) spectroscopy and sensing applications require widely tunable, narrow linewidth, chip-scale, single-mode sources without sacrificing significant output power. However, no such lasers have been demonstrated beyond 3 $μ$m due to the challenge of building tunable, high quality-factor (Q) on-chip cavities. We demonstrate a tunable, single-mode mid-IR laser at 3.4 $μ$m usi… ▽ More Portable mid-infrared (mid-IR) spectroscopy and sensing applications require widely tunable, narrow linewidth, chip-scale, single-mode sources without sacrificing significant output power. However, no such lasers have been demonstrated beyond 3 $μ$m due to the challenge of building tunable, high quality-factor (Q) on-chip cavities. We demonstrate a tunable, single-mode mid-IR laser at 3.4 $μ$m using a high-Q silicon microring cavity with integrated heaters and a multi-mode Interband Cascade Laser (ICL). We show that the multiple longitudinal modes of an ICL collapse into a single frequency via self-injection locking with an output power of 0.4 mW and achieve an oxide-clad high confinement waveguide microresonator with a loaded Q of $2.8\times 10^5$. Using integrated microheaters, our laser exhibits a wide tuning range of 54 nm at 3.4 $μ$m with 3 dB output power variation. We further measure an upper-bound effective linewidth of 9.1 MHz from the locked laser using a scanning Fabry-Perot interferometer. Our design of a single-mode laser based on a tunable high-Q microresonator can be expanded to quantum-cascade lasers at higher wavelengths and lead to the development of compact, portable, high-performance mid-IR sensors for spectroscopic and sensing applications. △ Less

Submitted 26 July, 2021; originally announced July 2021.

Measurements and modeling of atomic-scale sidewall roughness and losses in integrated photonic devices

Authors: Samantha Roberts, Xingchen Ji, Jaime Cardenas, Mateus Corato-Zanarella, Michal Lipson

Abstract: Atomic-level imperfections play an increasingly critical role in nanophotonic device performance. However, it remains challenging to accurately characterize the sidewall roughness with sub-nanometer resolution and directly correlate this roughness with device performance. We have developed a method that allows us to measure the sidewall roughness of waveguides made of any material (including diele… ▽ More Atomic-level imperfections play an increasingly critical role in nanophotonic device performance. However, it remains challenging to accurately characterize the sidewall roughness with sub-nanometer resolution and directly correlate this roughness with device performance. We have developed a method that allows us to measure the sidewall roughness of waveguides made of any material (including dielectrics) using the high resolution of atomic force microscopy. We illustrate this method by measuring state-of-the-art photonic devices made of silicon nitride. We compare the roughness of devices fabricated using both DUV photo-lithography and electron-beam lithography for two different etch processes. To correlate roughness with device performance we describe what we call a new Payne-Lacey Bending model, which adds a correction factor to the widely used Payne-Lacey model so that losses in resonators and waveguides with bends can be accurately predicted given the sidewall roughness, waveguide width and bending radii. Having a better way to measure roughness and use it to predict device performance can allow researchers and engineers to optimize fabrication for state-of-the-art photonics using many materials. △ Less

Submitted 3 July, 2022; v1 submitted 24 May, 2021; originally announced May 2021.

Comments: 16 pages, 10 figures

Optomechanical Synchronization across Multi-Octaves Frequency Spans

Authors: Caique C. Rodrigues, Cauê M. Kersul, André G. Primo, Michal Lipson, Thiago P. M. Alegre, Gustavo S. Wiederhecker

Abstract: Experimental exploration of synchronization in scalable oscillator micro systems has unfolded a deeper understanding of networks, collective phenomena, and signal processing. Cavity optomechanical devices have played an important role in this scenario, with the perspective of bridging optical and radio frequencies through nonlinear classical and quantum synchronization concepts. In its simplest fo… ▽ More Experimental exploration of synchronization in scalable oscillator micro systems has unfolded a deeper understanding of networks, collective phenomena, and signal processing. Cavity optomechanical devices have played an important role in this scenario, with the perspective of bridging optical and radio frequencies through nonlinear classical and quantum synchronization concepts. In its simplest form, synchronization occurs when an oscillator is entrained by a signal with frequency nearby the oscillator's tone, and becomes increasingly challenging as their frequency detuning increases. Here, we experimentally demonstrate entrainment of a silicon-nitride optomechanical oscillator driven up to the fourth harmonic of its 32 MHz fundamental frequency. Exploring this effect, we also experimentally demonstrate for the first time a purely optomechanical RF frequency divider, where we performed frequency division up to a 4:1 ratio, i.e., from 128 MHz to 32 MHz. Further developments could harness these effects towards frequency synthesizers, phase-sensitive amplification and nonlinear sensing. △ Less

Submitted 24 September, 2021; v1 submitted 4 May, 2021; originally announced May 2021.

Synchronization of non-solitonic Kerr combs

Authors: Bok Young Kim, Jae K. Jang, Yoshitomo Okawachi, Xingchen Ji, Michal Lipson, Alexander L. Gaeta

Abstract: Synchronization is a ubiquitous phenomenon in nature that manifests as the spectral or temporal locking of coupled nonlinear oscillators. In the field of photonics, synchronization has been implemented in various laser and oscillator systems, enabling applications including coherent beam combining and high precision pump-probe measurements. Recent experiments have also shown time-domain synchroniz… ▽ More Synchronization is a ubiquitous phenomenon in nature that manifests as the spectral or temporal locking of coupled nonlinear oscillators. In the field of photonics, synchronization has been implemented in various laser and oscillator systems, enabling applications including coherent beam combining and high precision pump-probe measurements. Recent experiments have also shown time-domain synchronization of Kerr frequency combs via coupling of two separate oscillators operating in the dissipative soliton [i.e., anomalous group-velocity dispersion (GVD)] regime. Here, we demonstrate all-optical synchronization of Kerr combs in the non-solitonic, normal-GVD regime in which phase-locked combs with high pump-to-comb conversion efficiencies and relatively flat spectral profiles are generated. Our results reveal the universality of Kerr comb synchronization and extend its scope beyond the soliton regime, opening a promising path towards coherently combined normal-GVD Kerr combs with spectrally flat profiles and high comb-line powers in an efficient microresonator platform. △ Less

Submitted 30 April, 2021; originally announced April 2021.

Comments: 7 pages, 4 figures

Exploiting Ultralow Loss Multimode Waveguides for Broadband Frequency Combs

Authors: Xingchen Ji, Jae K. Jang, Utsav D. Dave, Mateus Corato-Zanarella, Chaitanya Joshi, Alexander L. Gaeta, Michal Lipson

Abstract: Low propagation loss in high confinement waveguides is critical for chip-based nonlinear photonics applications. Sophisticated fabrication processes which yield sub-nm roughness are generally needed to reduce scattering points at the waveguide interfaces in order to achieve ultralow propagation loss. Here, we show ultralow propagation loss by sha** the mode using a highly multimode structure to… ▽ More Low propagation loss in high confinement waveguides is critical for chip-based nonlinear photonics applications. Sophisticated fabrication processes which yield sub-nm roughness are generally needed to reduce scattering points at the waveguide interfaces in order to achieve ultralow propagation loss. Here, we show ultralow propagation loss by sha** the mode using a highly multimode structure to reduce its overlap with the waveguide interfaces, thus relaxing the fabrication processing requirements. Microresonators with intrinsic quality factors (Q) of 31.8 $\pm$ 4.4 million are experimentally demonstrated. Although the microresonators support 10 transverse modes only the fundamental mode is excited and no higher order modes are observed when using nonlinear adiabatic bends. A record-low threshold pump power of 73 $μ$W for parametric oscillation is measured and a broadband, almost octave spanning single-soliton frequency comb without any signatures of higher order modes in the spectrum spanning from 1097 nm to 2040 nm (126 THz) is generated in the multimode microresonator. This work provides a design method that could be applied to different material platforms to achieve and use ultrahigh-Q multimode microresonators. △ Less

Submitted 7 December, 2020; originally announced December 2020.

Journal ref: Laser & Photonics Reviews (2020)

Scalable graphene platform for Tbits/s data transmission

Authors: Brian S. Lee, Alexandre P. Freitas, Andres Gil-Molina, Euijae Shim, Yibo Zhu, James Hone, Michal Lipson

Abstract: To date, no electro-optic platform enables devices with high bandwidth, small footprint, and low power consumption, while also enabling mass production. Here we demonstrate high-yield fabrication of high-speed graphene electro-absorption modulators using CVD-grown graphene. We minimize variation in device performance from graphene inhomogeneity over large area by engineering graphene-mode overlap… ▽ More To date, no electro-optic platform enables devices with high bandwidth, small footprint, and low power consumption, while also enabling mass production. Here we demonstrate high-yield fabrication of high-speed graphene electro-absorption modulators using CVD-grown graphene. We minimize variation in device performance from graphene inhomogeneity over large area by engineering graphene-mode overlap and device capacitance to ensure high extinction ratio. We fabricate an 8 mm x 1 mm chip with 32 graphene electro-absorption modulators and measure 94% yield with bit error rate below the hard-decision forward error correction limit at 7 Gbits/s, amounting to a total aggregated data rate of 210 Gbits/s. Monte Carlo simulations show that data rates > 0.6 Tbits/s are within reach by further optimizing device cross-section, paving the way for graphene-based ultra-high data rate applications. △ Less

Submitted 12 November, 2020; originally announced November 2020.

High performance integrated graphene electro-optic modulator at cryogenic temperature

Authors: Brian S. Lee, Bumho Kim, Alexandre P. Freitas, Aseema Mohanty, Yibo Zhu, Gaurang R. Bhatt, James Hone, Michal Lipson

Abstract: High performance integrated electro-optic modulators operating at low temperature are critical for optical interconnects in cryogenic applications. Existing integrated modulators, however, suffer from reduced modulation efficiency or bandwidth at low temperatures because they rely on tuning mechanisms that degrade with decreasing temperature. Graphene modulators are a promising alternative, since… ▽ More High performance integrated electro-optic modulators operating at low temperature are critical for optical interconnects in cryogenic applications. Existing integrated modulators, however, suffer from reduced modulation efficiency or bandwidth at low temperatures because they rely on tuning mechanisms that degrade with decreasing temperature. Graphene modulators are a promising alternative, since graphene's intrinsic carrier mobility increases at low temperature. Here we demonstrate an integrated graphene-based electro-optic modulator whose 14.7 GHz bandwidth at 4.9 K exceeds the room-temperature bandwidth of 12.6 GHz. The bandwidth of the modulator is limited only by high contact resistance, and its intrinsic RC-limited bandwidth is 200 GHz at 4.9 K. △ Less

Submitted 2 July, 2020; originally announced July 2020.

Comments: 10 pages, 4 figures, Supplementary Information

Nanophotonic spin-glass for realization of a coherent Ising machine

Authors: Yoshitomo Okawachi, Mengjie Yu, Jae K. Jang, Xingchen Ji, Yun Zhao, Bok Young Kim, Michal Lipson, Alexander L. Gaeta

Abstract: The need for solving optimization problems is prevalent in a wide range of physical applications, including neuroscience, network design, biological systems, socio-economics, and chemical reactions. Many of these are classified as non-deterministic polynomial-time (NP) hard and thus become intractable to solve as the system scales to a large number of elements. Recent research advances in photonic… ▽ More The need for solving optimization problems is prevalent in a wide range of physical applications, including neuroscience, network design, biological systems, socio-economics, and chemical reactions. Many of these are classified as non-deterministic polynomial-time (NP) hard and thus become intractable to solve as the system scales to a large number of elements. Recent research advances in photonics have sparked interest in using a network of coupled degenerate optical parametric oscillators (DOPO's) to effectively find the ground state of the Ising Hamiltonian, which can be used to solve other combinatorial optimization problems through polynomial-time map**. Here, using the nanophotonic silicon-nitride platform, we propose a network of on-chip spatial-multiplexed DOPO's for the realization of a photonic coherent Ising machine. We demonstrate the generation and coupling of two microresonator-based DOPO's on a single chip. Through a reconfigurable phase link, we achieve both in-phase and out-of-phase operation, which can be deterministically achieved at a fast regeneration speed of 400 kHz with a large phase tolerance. Our work provides the critical building blocks towards the realization of a chip-scale photonic Ising machine. △ Less

Submitted 25 March, 2020; originally announced March 2020.

Comments: 8 pages, 6 figures

Frequency-Domain Quantum Interference with Correlated Photons from an Integrated Microresonator

Authors: Chaitali Joshi, Alessandro Farsi, Avik Dutt, Bok Young Kim, Xingchen Ji, Yun Zhao, Andrew M. Bishop, Michal Lipson, Alexander L. Gaeta

Abstract: Frequency encoding of quantum information together with fiber and integrated photonic technologies can significantly reduce the complexity and resource requirements for realizing all-photonic quantum networks. The key challenge for such frequency domain processing of single photons is to realize coherent and selective interactions between quantum optical fields of different frequencies over a rang… ▽ More Frequency encoding of quantum information together with fiber and integrated photonic technologies can significantly reduce the complexity and resource requirements for realizing all-photonic quantum networks. The key challenge for such frequency domain processing of single photons is to realize coherent and selective interactions between quantum optical fields of different frequencies over a range of bandwidths. Here, we report frequency-domain Hong-Ou-Mandel interference with spectrally distinct photons generated from a chip-based microresonator. We use four-wave mixing to implement an active frequency beam-splitter and achieve interference visibilities of $0.95 \pm 0.02$. Our work establishes four-wave mixing as a tool for selective high-fidelity two-photon operations in the frequency domain which, combined with integrated single-photon sources, provides a building block for frequency-multiplexed photonic quantum networks. △ Less

Submitted 13 March, 2020; originally announced March 2020.

Journal ref: Phys. Rev. Lett. 124, 143601 (2020)

Near-degenerate quadrature-squeezed vacuum generation on a silicon-nitride chip

Authors: Yun Zhao, Yoshitomo Okawachi, Jae K. Jang, Xingchen Ji, Michal Lipson, Alexander L. Gaeta

Abstract: Squeezed states are a primary resource for continuous-variable (CV) quantum information processing. To implement CV protocols in a scalable and robust way, it is desirable to generate and manipulate squeezed states using an integrated photonics platform. In this Letter, we demonstrate the generation of quadrature-phase squeezed states in the radio-frequency carrier sideband using a small-footprint… ▽ More Squeezed states are a primary resource for continuous-variable (CV) quantum information processing. To implement CV protocols in a scalable and robust way, it is desirable to generate and manipulate squeezed states using an integrated photonics platform. In this Letter, we demonstrate the generation of quadrature-phase squeezed states in the radio-frequency carrier sideband using a small-footprint silicon-nitride microresonator with a dual-pumped four-wave-mixing process. We record a squeezed noise level of 1.34 dB ($\pm$0.16 dB) below the photocurrent shot noise, which corresponds to 3.09 dB ($\pm$0.49 dB) of quadrature squeezing on chip. We also show that it is critical to account for the nonlinear behavior of the pump fields to properly predict the squeezing that can be generated in this system. This technology represents a significant step toward creating and manipulating large-scale CV cluster states that can be used for quantum information applications including universal quantum computing. △ Less

Submitted 21 July, 2020; v1 submitted 3 February, 2020; originally announced February 2020.

Comments: 13 pages, 7 figures

Journal ref: Phys. Rev. Lett. 124, 193601 (2020)

Broadband Ultrahigh-Resolution chip-scale Scanning Soliton Dual-Comb Spectroscopy

Authors: Tong Lin, Avik Dutt, Chaitanya Joshi, Xingchen Ji, Christopher T. Phare, Yoshitomo Okawachi, Alexander L. Gaeta, Michal Lipson

Abstract: We present a chip-scale scanning dual-comb spectroscopy (SDCS) approach for broadband ultrahigh-resolution spectral acquisition. SDCS uses Si3N4 microring resonators that generate two single soliton micro-combs spanning 37 THz (300 nm) on the same chip from a single 1550-nm laser, forming a high-mutual-coherence dual-comb. We realize continuous tuning of the dual-comb system over the entire optica… ▽ More We present a chip-scale scanning dual-comb spectroscopy (SDCS) approach for broadband ultrahigh-resolution spectral acquisition. SDCS uses Si3N4 microring resonators that generate two single soliton micro-combs spanning 37 THz (300 nm) on the same chip from a single 1550-nm laser, forming a high-mutual-coherence dual-comb. We realize continuous tuning of the dual-comb system over the entire optical span of 37.5 THz with high precision using integrated microheater-based wavelength trackers. This continuous wavelength tuning is enabled by simultaneous tuning of the laser frequency and the two single soliton micro-combs over a full free spectral range of the microrings. We measure the SDCS resolution to be 319+-4.6 kHz. Using this SDCS system, we perform the molecular absorption spectroscopy of H13C14N over its 2.3 THz (18 nm)-wide overtone band, and show that the massively parallel heterodyning offered by the dual-comb expands the effective spectroscopic tuning speed of the laser by one order of magnitude. Our chip-scale SDCS opens the door to broadband spectrometry and massively parallel sensing with ultrahigh spectral resolution. △ Less

Submitted 13 January, 2020; v1 submitted 3 January, 2020; originally announced January 2020.

Integrated near-field thermo-photovoltaics for on-demand heat recycling

Authors: Gaurang R. Bhatt, Bo Zhao, Samantha Roberts, Ipshita Datta, Aseema Mohanty, Tong Lin, Jean-Michel Hartmann, Raphael St-Gelais, Shanhui Fan, Michal Lipson

Abstract: The energy transferred via thermal radiation between two surfaces separated by nanometers distances (near-field) can be much larger than the blackbody limit. However, realizing a reconfigurable platform that utilizes this energy exchange mechanism to generate electricity in industrial and space applications on-demand, remains a challenge. The challenge lies in designing a platform that can separat… ▽ More The energy transferred via thermal radiation between two surfaces separated by nanometers distances (near-field) can be much larger than the blackbody limit. However, realizing a reconfigurable platform that utilizes this energy exchange mechanism to generate electricity in industrial and space applications on-demand, remains a challenge. The challenge lies in designing a platform that can separate two surfaces by a small and tunable gap while simultaneously maintaining a large temperature differential. Here, we present a fully integrated, reconfigurable and scalable platform operating in near-field regime that performs controlled heat extraction and energy recycling. Our platform relies on an integrated nano-electromechanical system (NEMS) that enables precise positioning of a large area thermal emitter within nanometers distances from a room-temperature germanium photodetector to form a thermo-photovoltaic (TPV) cell. We show over an order of magnitude higher power generation $\mathrm{P_{gen} \sim 1.25 \, μW \cdot cm^{-2}}$ from our TPV cell by tuning the gap between a hot emitter ($\mathrm{T_E \sim 880 \, K}$) and the cold photodetector ($\mathrm{T_D \sim 300 \, K}$) from $\mathrm{\sim 500 \, nm}$ to $\mathrm{\sim 100 \, nm}$. The significant enhancement in $\mathrm{P_{gen}}$ at such small distances is a clear indication of near-field heat transfer effect. Our electrostatically controlled NEMS switch consumes negligible tuning power ($\mathrm{P_{gen}/P_{NEMS} \sim 10^4}$) and relies on conventional silicon-based process technologies. △ Less

Submitted 23 November, 2019; originally announced November 2019.

Observation of Arnold Tongues in Coupled Soliton Kerr Frequency Combs

Authors: Jae K. Jang, Xingchen Ji, Chaitanya Joshi, Yoshitomo Okawachi, Michal Lipson, Alexander L. Gaeta

Abstract: We demonstrate various regimes of synchronization in systems of two coupled cavity soliton-based Kerr frequency combs. We show sub-harmonic, harmonic and harmonic-ratio synchronization of coupled microresonators, and reveal their dynamics in the form of Arnold tongues, structures that are ubiquitous in nonlinear dynamical systems. Our experimental results are well corroborated by numerical simulat… ▽ More We demonstrate various regimes of synchronization in systems of two coupled cavity soliton-based Kerr frequency combs. We show sub-harmonic, harmonic and harmonic-ratio synchronization of coupled microresonators, and reveal their dynamics in the form of Arnold tongues, structures that are ubiquitous in nonlinear dynamical systems. Our experimental results are well corroborated by numerical simulations based on coupled Lugiato-Lefever equations. This study illustrates the newfound degree of flexibility in synchronizing Kerr combs across a wide range of comb spacings and could find applications in time and frequency metrology, spectroscopy, microwave photonics, optical communications, and astronomy. △ Less

Submitted 2 October, 2019; originally announced October 2019.

Journal ref: Phys. Rev. Lett. 123, 153901 (2019)

Turn-key, high-efficiency Kerr comb source

Authors: Bok Young Kim, Yoshitomo Okawachi, Jae K. Jang, Mengjie Yu, Xingchen Ji, Yun Zhao, Chaitanya Joshi, Michal Lipson, Alexander L. Gaeta

Abstract: We demonstrate an approach for automated Kerr comb generation in the normal group-velocity dispersion (GVD) regime. Using a coupled-ring geometry in silicon nitride, we precisely control the wavelength location and splitting strength of avoided mode crossings to generate low-noise frequency combs with pump-to-comb conversion efficiencies of up to 41%, which is the highest reported to date for norm… ▽ More We demonstrate an approach for automated Kerr comb generation in the normal group-velocity dispersion (GVD) regime. Using a coupled-ring geometry in silicon nitride, we precisely control the wavelength location and splitting strength of avoided mode crossings to generate low-noise frequency combs with pump-to-comb conversion efficiencies of up to 41%, which is the highest reported to date for normal-GVD Kerr combs. Our technique enables on-demand generation of a high-power comb source for applications such as wavelength-division multiplexing in optical communications. △ Less

Submitted 16 July, 2019; originally announced July 2019.

Comments: 5 pages, 5 figures

Visible nonlinear photonics via high-order-mode dispersion engineering

Authors: Yun Zhao, Xingchen Ji, Bok Young Kim, Prathamesh S. Donvalkar, Jae K. Jang, Chaitanya Joshi, Mengjie Yu, Chaitali Joshi, Renato R. Domeneguetti, Felippe A. S. Barbosa, Paulo Nussenzveig, Yoshitomo Okawachi, Michal Lipson, Alexander L. Gaeta

Abstract: Over the past decade, remarkable advances have been realized in chip-based nonlinear photonic devices for classical and quantum applications in the near- and mid-infrared regimes. However, few demonstrations have been realized in the visible and near-visible regimes, primarily due to the large normal material group-velocity dispersion (GVD) that makes it challenging to phase match third-order para… ▽ More Over the past decade, remarkable advances have been realized in chip-based nonlinear photonic devices for classical and quantum applications in the near- and mid-infrared regimes. However, few demonstrations have been realized in the visible and near-visible regimes, primarily due to the large normal material group-velocity dispersion (GVD) that makes it challenging to phase match third-order parametric processes. In this paper, we show that exploiting dispersion engineering of higher-order waveguide modes provides waveguide dispersion that allows for small or anomalous GVD in the visible and near-visible regimes and phase matching of four-wave mixing processes. We illustrate the power of this concept by demonstrating in silicon nitride microresonators a near-visible modelocked Kerr frequency comb and a narrow-band photon-pair source compatible with Rb transitions. These realizations extend applications of nonlinear photonics towards the visible and near-visible regimes for applications in time and frequency metrology, spectral calibration, quantum information, and biomedical applications. △ Less

Submitted 20 February, 2020; v1 submitted 10 July, 2019; originally announced July 2019.

Comments: 15 pages, 9 figures

Journal ref: Optica 7, 135 (2020)

Low-loss composite photonic platform based on 2D semiconductor monolayers

Authors: Ipshita Datta, Sang Hoon Chae, Gaurang R. Bhatt, Mohammad A. Tadayon, Baichang Li, Yiling Yu, Chibeom Park, Jiwoong Park, Linyou Cao, D. N. Basov, James Hone, Michal Lipson

Abstract: Two dimensional materials such as graphene and transition metal dichalcogenides (TMDs) are promising for optical modulation, detection, and light emission since their material properties can be tuned on-demand via electrostatic do**. The optical properties of TMDs have been shown to change drastically with do** in the wavelength range near the excitonic resonances. However, little is known abo… ▽ More Two dimensional materials such as graphene and transition metal dichalcogenides (TMDs) are promising for optical modulation, detection, and light emission since their material properties can be tuned on-demand via electrostatic do**. The optical properties of TMDs have been shown to change drastically with do** in the wavelength range near the excitonic resonances. However, little is known about the effect of do** on the optical properties of TMDs away from these resonances, where the material is transparent and therefore could be leveraged in photonic circuits. Here, we probe the electro-optic response of monolayer TMDs at near infrared (NIR) wavelengths (i.e. deep in the transparency regime), by integrating them on silicon nitride (SiN) photonic structures to induce strong light$-$matter interaction with the monolayer. We dope the monolayer to carrier densities of ($7.2 \pm 0.8$) $\times$ $10^{13} \textrm{cm}^{-2}$, by electrically gating the TMD using an ionic liquid. We show strong electro-refractive response in monolayer tungsten disulphide (WS$_2$) at NIR wavelengths by measuring a large change in the real part of refractive index $Δ$n = $0.53$, with only a minimal change in the imaginary part $Δ$k = $0.004$. The do** induced phase change ($Δ$n), compared to the induced absorption ($Δ$k) measured for WS$_2$ ($Δ$n/$Δ$k $\sim 125$), a key metric for photonics, is an order of magnitude higher than the $Δ$n/$Δ$k for bulk materials like silicon ($Δ$n/$Δ$k $\sim 10$), making it ideal for various photonic applications. We further utilize this strong tunable effect to demonstrate an electrostatically gated SiN-WS$_2$ phase modulator using a WS$_2$-HfO$_2$ (Hafnia)-ITO (Indium Tin Oxide) capacitive configuration, that achieves a phase modulation efficiency (V$_π$L) of 0.8 V $\cdot$ cm with a RC limited bandwidth of 0.3 GHz. △ Less

Submitted 2 June, 2019; originally announced June 2019.

Chip-based frequency combs sources for optical coherence tomography

Authors: Xingchen Ji, Alexander Klenner, Xinwen Yao, Yu Gan, Alexander L. Gaeta, Christine P. Hendon, Michal Lipson

Abstract: The Optical coherence tomography (OCT) is a powerful interferometric imaging technique widely used in medical fields such as ophthalmology, cardiology and dermatology, for which footprint and cost are becoming increasingly important. Here we present a platform for miniaturized sources for OCT based on chip-scale lithographically-defined microresonators. We show that the proposed platform is compat… ▽ More The Optical coherence tomography (OCT) is a powerful interferometric imaging technique widely used in medical fields such as ophthalmology, cardiology and dermatology, for which footprint and cost are becoming increasingly important. Here we present a platform for miniaturized sources for OCT based on chip-scale lithographically-defined microresonators. We show that the proposed platform is compatible with standard commercial spectral domain (SD) OCT systems and enable imaging of human tissue with an image quality comparable to the one achieved with tabletop commercial sources. This platform provides a path towards fully integrated OCT systems. △ Less

Submitted 20 February, 2019; originally announced February 2019.

Synchronization of coupled optical microresonators

Authors: Jae K. Jang, Alexander Klenner, Xingchen Ji, Yoshitomo Okawachi, Michal Lipson, Alexander L. Gaeta

Abstract: The phenomenon of synchronization occurs universally across the natural sciences and provides critical insight into the behavior of coupled nonlinear dynamical systems. It also offers a powerful approach to robust frequency or temporal locking in diverse applications including communications, superconductors, and photonics. Here we report the experimental synchronization of two coupled soliton mod… ▽ More The phenomenon of synchronization occurs universally across the natural sciences and provides critical insight into the behavior of coupled nonlinear dynamical systems. It also offers a powerful approach to robust frequency or temporal locking in diverse applications including communications, superconductors, and photonics. Here we report the experimental synchronization of two coupled soliton modelocked chip-based frequency combs separated over distances of 20 m. We show that such a system obeys the universal Kuramoto model for synchronization and that the cavity solitons from the microresonators can be coherently combined which overcomes the fundamental power limit of microresonator-based combs. This study could significantly expand applications of microresonator combs, and with its capability for massive integration, offers a chip-based photonic platform for exploring complex nonlinear systems. △ Less

Submitted 6 June, 2018; originally announced June 2018.

Journal ref: Nature Photonics 12, 688-693 (2018)

Gas-phase microresonator-based comb spectroscopy without an external pump laser

Authors: Mengjie Yu, Yoshitomo Okawachi, Chaitanya Joshi, Xingchen Ji, Michal Lipson, Alexander L. Gaeta

Abstract: We present a novel approach to realize microresonator-comb-based high resolution spectroscopy that combines a fiber-laser cavity with a microresonator. Although the spectral resolution of a chip-based comb source is typically limited by the free spectral range (FSR) of the microresonator, we overcome this limit by tuning the 200-GHz repetition-rate comb over one FSR via control of an integrated he… ▽ More We present a novel approach to realize microresonator-comb-based high resolution spectroscopy that combines a fiber-laser cavity with a microresonator. Although the spectral resolution of a chip-based comb source is typically limited by the free spectral range (FSR) of the microresonator, we overcome this limit by tuning the 200-GHz repetition-rate comb over one FSR via control of an integrated heater. Our dual-cavity scheme allows for self-starting comb generation without the need for conventional pump-cavity detuning while achieving a spectral resolution equal to the comb linewidth. We measure broadband molecular absorption spectra of acetylene by interleaving 800 spectra taken at 250-MHz per spectral step using a 60-GHz-coarse-resolution spectrometer and exploits advances of integrated heater which can locally and rapidly change the refractive index of a microresonator with low electrical consumption (0.9 GHz/mW), which is orders of magnitude lower than a fiber-based comb. This approach offers a path towards a simple, robust and low-power consumption CMOS-compatible platform capable of remote sensing. △ Less

Submitted 4 June, 2018; originally announced June 2018.

A Reconfigurable Nanophotonics Platform for Sub-Millisecond, Deep Brain Neural Stimulation

Authors: Aseema Mohanty, Qian Li, Mohammad Amin Tadayon, Gaurang Bhatt, Euijae Shim, Xingchen Ji, Jaime Cardenas, Steven A. Miller, Adam Kepecs, Michal Lipson

Abstract: Nanophotonics provides the ability to rapidly and precisely reconfigure light beams on a compact platform. Infrared nanophotonic devices are widely used in data communications to overcome traditional bandwidth limitations of electrical interconnects. Nanophotonic devices also hold promise for use in biological applications that require visible light, but this has remained technically elusive due t… ▽ More Nanophotonics provides the ability to rapidly and precisely reconfigure light beams on a compact platform. Infrared nanophotonic devices are widely used in data communications to overcome traditional bandwidth limitations of electrical interconnects. Nanophotonic devices also hold promise for use in biological applications that require visible light, but this has remained technically elusive due to the challenges of reconfiguring and guiding light at these smaller dimensions. In neuroscience, for example, there is a need for implantable optical devices to optogenetically stimulate neurons across deep brain regions with the speed and precision matching state-of-the-art recording probes. Here we demonstrate the first platform for reconfigurable nanophotonic devices in the visible wavelength range and show its application in vivo in the brain. We demonstrate an implantable probe endowed with the ability to rapidly switch and route multiple optical beams using a nanoscale switching network. Each switch consists of a silicon nitride waveguide structure that can be reconfigured by electrically tuning the phase of light and is designed for robustness to fabrication variation, enabling scalable devices. By implanting our probe in mouse visual cortex, we demonstrate in vivo the ability to stimulate identified sets of neurons across layers to produce multi-neuron spike patterns and record them simultaneously with sub-millisecond temporal precision. This nanophotonic platform can be scaled up and integrated with high-density neural recording technologies, opening the door to implantable probe technologies that are able to simultaneously record and stimulate the activity of large neural populations at distant regions of the brain with sub-millisecond precision. We expect this platform will enable researchers to gain a deeper understanding into the spatio-temporal precision of the neural code. △ Less

Submitted 14 May, 2018; originally announced May 2018.

Comments: 14 pages, 11 figures

Fully integrated ultra-low power Kerr comb generation

Authors: Brian Stern, Xingchen Ji, Yoshitomo Okawachi, Alexander L. Gaeta, Michal Lipson

Abstract: Optical frequency combs are broadband sources that offer mutually-coherent, equidistant spectral lines with unprecedented precision in frequency and timing for an array of applications. Kerr frequency combs in microresonators require a single-frequency pump laser and have offered the promise of highly compact, scalable, and power efficient devices. Here, we realize this promise by demonstrating th… ▽ More Optical frequency combs are broadband sources that offer mutually-coherent, equidistant spectral lines with unprecedented precision in frequency and timing for an array of applications. Kerr frequency combs in microresonators require a single-frequency pump laser and have offered the promise of highly compact, scalable, and power efficient devices. Here, we realize this promise by demonstrating the first fully integrated Kerr frequency comb source through use of extremely low-loss silicon nitride waveguides that form both the microresonator and an integrated laser cavity. Our device generates low-noise soliton-modelocked combs spanning over 100 nm using only 98 mW of electrical pump power. Our design is based on a novel dual-cavity configuration that demonstrates the flexibility afforded by full integration. The realization of a fully integrated Kerr comb source with ultra-low power consumption brings the possibility of highly portable and robust frequency and timing references, sensors, and signal sources. It also enables new tools to investigate the dynamics of comb and soliton generation through close chip-based integration of microresonators and lasers. △ Less

Submitted 1 April, 2018; originally announced April 2018.

Comments: 12 pages, 6 figures

Journal ref: Nature 562, 401-405 (October 8, 2018)

Strong Nonlinear Coupling due to Induced Photon Interaction on a Si$_{3}$N$_{4}$ Chip

Authors: Sven Ramelow, Alessandro Farsi, Zachary Vernon, Stephane Clemmen, Xingchen Ji, John E. Sipe, Marco Liscidini, Michal Lipson, Alexander L. Gaeta

Abstract: Second-order optical processes lead to a host of applications in classical and quantum optics. With the enhancement of parametric interactions that arise due to light confinement, on-chip implementations promise very-large-scale photonic integration. But as yet there is no route to a device that acts at the single photon level. Here we exploit the $χ^{(3)}$ nonlinear response of a Si$_{3}$N$_{4}$… ▽ More Second-order optical processes lead to a host of applications in classical and quantum optics. With the enhancement of parametric interactions that arise due to light confinement, on-chip implementations promise very-large-scale photonic integration. But as yet there is no route to a device that acts at the single photon level. Here we exploit the $χ^{(3)}$ nonlinear response of a Si$_{3}$N$_{4}$ microring resonator to induce a large effective $χ^{(2)}$. Effective second-order upconversion (ESUP) of a seed to an idler can be achieved with 74,000 %/W efficiency, indicating that single photon nonlinearity is within reach of current technology. Moreover, we show a nonlinear coupling rate of seed and idler larger than the energy dissipation rate in the resonator, indicating a strong coupling regime. Consequently we observe a Rabi-like splitting, for which we provide a detailed theoretical description. This yields new insight into the dynamics of ultrastrong effective nonlinear interactions in microresonators, and access to novel phenomena and applications in classical and quantum nonlinear optics. △ Less

Submitted 28 June, 2018; v1 submitted 27 February, 2018; originally announced February 2018.

Comments: 9 pages, 6 figures, 1 table. Comments and remarks are highly welcome - please contact us!

Silicon Optical Phased Array with High-Efficiency Beam Formation over 180 Degree Field of View

Authors: Christopher T. Phare, Min Chul Shin, Steven A. Miller, Brian Stern, Michal Lipson

Abstract: Chip-scale optical phased arrays could enable compact beam steering and LIDAR for autonomous vehicles, precision robotics, and free-space optical communications. Because these applications demand wide angle beam steering as well as high optical power in the output beam, a natural design choice would be to space the array emitters at a half-wavelength pitch, as is common in radiofrequency phased ar… ▽ More Chip-scale optical phased arrays could enable compact beam steering and LIDAR for autonomous vehicles, precision robotics, and free-space optical communications. Because these applications demand wide angle beam steering as well as high optical power in the output beam, a natural design choice would be to space the array emitters at a half-wavelength pitch, as is common in radiofrequency phased arrays. Optical phased arrays, however, unlike RF phased arrays, have been limited by the tradeoff between field of view (i.e. angle steering) and beamforming efficiency (i.e. optical power in the output beam). This tradeoff exists because optical phased arrays rely on waveguides as emitters, which suffer from strong crosstalk when placed in close proximity relative to their mode size. Here we overcome these limitations and demonstrate a platform for optical phased arrays with 180° field of view, where more than 72 percent of the power is carried in a single diffraction-limited beam even when steered up to 60° off-axis. Our platform leverages high index-contrast, dispersion-engineered waveguides spaced one half-wavelength apart without incurring crosstalk. △ Less

Submitted 13 February, 2018; originally announced February 2018.

Comments: 12 pages, 4 figures

Counter-rotating cavity solitons in a silicon nitride microresonator

Authors: Chaitanya Joshi, Alexander Klenner, Yoshitomo Okawachi, Mengjie Yu, Kevin Luke, Xingchen Ji, Michal Lipson, Alexander L. Gaeta

Abstract: We demonstrate the generation of counter-rotating cavity solitons in a silicon nitride microresonator using a fixed, single-frequency laser. We demonstrate a dual 3-soliton state with a difference in the repetition rates of the soliton trains that can be tuned by varying the ratio of pump powers in the two directions. Such a system enables a highly compact, tunable dual comb source that can be use… ▽ More We demonstrate the generation of counter-rotating cavity solitons in a silicon nitride microresonator using a fixed, single-frequency laser. We demonstrate a dual 3-soliton state with a difference in the repetition rates of the soliton trains that can be tuned by varying the ratio of pump powers in the two directions. Such a system enables a highly compact, tunable dual comb source that can be used for applications such as spectroscopy and distance ranging. △ Less

Submitted 13 November, 2017; originally announced November 2017.

Comments: 5pages, 5 figures

Resonance-Free Light Recycling

Authors: You-Chia Chang, Samantha P. Roberts, Brian Stern, Michal Lipson

Abstract: The inability to efficiently tune the optical properties of waveguiding structures has been one of the major hurdles for the future scalability of integrated photonic systems. In silicon photonics, although dynamic tuning has been achieved with various mechanisms, even the most effective thermo-optic effect offers a refractive index change of only $1.86 \times 10^{-4} K^{-1}$. To enhance this smal… ▽ More The inability to efficiently tune the optical properties of waveguiding structures has been one of the major hurdles for the future scalability of integrated photonic systems. In silicon photonics, although dynamic tuning has been achieved with various mechanisms, even the most effective thermo-optic effect offers a refractive index change of only $1.86 \times 10^{-4} K^{-1}$. To enhance this small change, light recycling based on resonators has been employed in order to realize efficient modulators, phase shifters, and optical switches. However, the resonant enhancement comes at a great cost of optical bandwidth, fabrication tolerance and system scalability. Here we demonstrate a scalable light recycling approach based on spatial-mode multiplexing. Our approach offers a fabrication tolerance of ${\pm}$ 15 nm, in stark contrast to the non-scalable subnanometer tolerance in typical silicon resonators. We experimentally demonstrate light recycling up to 7 passes with an optical bandwidth greater than 100 nm. We realize power-efficient thermo-optic phase shifters that require only 1.7 mW per $π$, representing more than an 8-fold reduction in the power consumption. △ Less

Submitted 8 October, 2017; originally announced October 2017.

Comments: 25 pages, 12 figures

Coherent, directional supercontinuum via cascaded dispersive wave generation

Authors: Yoshitomo Okawachi, Mengjie Yu, Jaime Cardenas, Xingchen Ji, Michal Lipson, Alexander L. Gaeta

Abstract: We demonstrate a novel approach to producing coherent, directional supercontinuum via cascaded dispersive wave generation. By pum** in the normal group-velocity dispersion regime, pulse compression of the first dispersive wave results in the generation of a second dispersive wave, resulting in an octave-spanning supercontinuum generated primarily to one side of the pump spectrum. We theoreticall… ▽ More We demonstrate a novel approach to producing coherent, directional supercontinuum via cascaded dispersive wave generation. By pum** in the normal group-velocity dispersion regime, pulse compression of the first dispersive wave results in the generation of a second dispersive wave, resulting in an octave-spanning supercontinuum generated primarily to one side of the pump spectrum. We theoretically investigate the dynamics and show that the generated spectrum is highly coherent. We experimentally confirm this dynamical behavior and the coherence properties in silicon nitride waveguides by performing direct detection of the carrier-envelope-offset frequency of our femtosecond pump source using an f-2f interferometer. Our technique offers a path towards a stabilized, high-power, integrated supercontinuum source with low noise and high coherence, with applications including direct comb spectroscopy. △ Less

Submitted 11 August, 2017; originally announced August 2017.

Microresonator-based high-resolution gas spectroscopy

Authors: Mengjie Yu, Yoshitomo Okawachi, Austin G. Griffith, Michal Lipson, Alexander L. Gaeta

Abstract: In recent years, microresonator-based optical frequency combs have created up opportunities for develo** a spectroscopy laboratory on a chip due to its broadband emission and high comb power. However, with mode spacings typically in the range of 10 - 1000 GHz, the realization of a chip-based high-resolution spectrometer suitable for gas-phase spectroscopy has proven to be difficult. Here, we sho… ▽ More In recent years, microresonator-based optical frequency combs have created up opportunities for develo** a spectroscopy laboratory on a chip due to its broadband emission and high comb power. However, with mode spacings typically in the range of 10 - 1000 GHz, the realization of a chip-based high-resolution spectrometer suitable for gas-phase spectroscopy has proven to be difficult. Here, we show mode-hop-free tuning of a microresonator-based frequency comb over 16 GHz by simultaneously tuning both the pump laser and the cavity resonance. We illustrate the power of this scanning technique by demonstrating gas-phase molecular fingerprinting of acetylene with a high-spectral-resolution of < 80 MHz over a 45-THz optical bandwidth in the mid-IR. Our technique represents a significant step towards on-chip gas sensing with an ultimate spectral resolution given by the comb linewidth. △ Less

Submitted 11 July, 2017; originally announced July 2017.

Competition between Raman and Kerr effects in microresonator comb generation

Authors: Yoshitomo Okawachi, Mengjie Yu, Vivek Venkataraman, Pawel M. Latawiec, Austin G. Griffith, Michal Lipson, Marko Loncar, Alexander L. Gaeta

Abstract: We investigate the effects of Raman and Kerr gain in crystalline microresonators and determine the conditions required to generate modelocked frequency combs. We show theoretically that strong, narrowband Raman gain determines a maximum microresonator size allowable to achieve comb formation. We verify this condition experimentally in diamond and silicon microresonators and show that there exists… ▽ More We investigate the effects of Raman and Kerr gain in crystalline microresonators and determine the conditions required to generate modelocked frequency combs. We show theoretically that strong, narrowband Raman gain determines a maximum microresonator size allowable to achieve comb formation. We verify this condition experimentally in diamond and silicon microresonators and show that there exists a competition between Raman and Kerr effects that leads to the existence of two different comb states. △ Less

Submitted 4 May, 2017; originally announced May 2017.

On-chip thermo-optic tuning of suspended microresonators

Authors: Brian S. Lee, Mian Zhang, Felippe A. S. Barbosa, Steven A. Miller, Aseema Mohanty, Raphael St-Gelais, Michal Lipson

Abstract: Suspended optical microresonators are promising devices for on-chip photonic applications such as radio-frequency oscillators, optical frequency combs, and sensors. Scaling up these devices demand the capability to tune the optical resonances in an integrated manner. Here, we design and experimentally demonstrate integrated on-chip thermo-optic tuning of suspended microresonators by utilizing susp… ▽ More Suspended optical microresonators are promising devices for on-chip photonic applications such as radio-frequency oscillators, optical frequency combs, and sensors. Scaling up these devices demand the capability to tune the optical resonances in an integrated manner. Here, we design and experimentally demonstrate integrated on-chip thermo-optic tuning of suspended microresonators by utilizing suspended wire bridges and microheaters. We demonstrate the ability to tune the resonance of a suspended microresonator in silicon nitride platform by 9.7 GHz using 5.3 mW of heater power. The loaded optical quality factor (QL ~ 92,000) stays constant throughout the detuning. We demonstrate the efficacy of our approach by completely turning on and off the optical coupling between two evanescently coupled suspended microresonators. △ Less

Submitted 27 March, 2017; originally announced March 2017.

Comments: 12 pages, 10 figures

Journal ref: Optics Express 25(11), 12109-12120 (2017)

Low-Loss Silicon Platform for Broadband Mid-Infrared Photonics

Authors: Steven A. Miller, Mengjie Yu, Xingchen Ji, Austin G. Griffith, Jaime Cardenas, Alexander L. Gaeta, Michal Lipson

Abstract: Broadband mid-infrared (mid-IR) spectroscopy applications could greatly benefit from today's well-developed, highly scalable silicon photonics technology; however, this platform lacks broadband transparency due to its reliance on absorptive silicon dioxide cladding. Alternative cladding materials have been studied, but the challenge lies in decreasing losses while avoiding complex fabrication tech… ▽ More Broadband mid-infrared (mid-IR) spectroscopy applications could greatly benefit from today's well-developed, highly scalable silicon photonics technology; however, this platform lacks broadband transparency due to its reliance on absorptive silicon dioxide cladding. Alternative cladding materials have been studied, but the challenge lies in decreasing losses while avoiding complex fabrication techniques. Here, in contrast to traditional assumptions, we show that silicon photonics can achieve low-loss propagation in the mid-IR from 3 - 6 um wavelength, thus providing a highly scalable, well-developed technology in this spectral range. We engineer the waveguide cross section and optical mode interaction with the absorptive cladding oxide to reduce loss at mid-IR wavelengths. We fabricate a microring resonator and measure an intrinsic quality (Q) factor of 10^6 at wavelengths from 3.5 to 3.8 um. This is the highest Q demonstrated on an integrated mid-IR platform to date. With this high-Q silicon microresonator, we also demonstrate a low optical parametric oscillation threshold of 5.2 mW, illustrating the utility of this platform for nonlinear chip-scale applications in the mid-IR. △ Less

Submitted 9 March, 2017; originally announced March 2017.

Nanophotonic Lithium Niobate Electro-optic Modulators

Authors: Cheng Wang, Mian Zhang, Brian Stern, Michal Lipson, Marko Loncar

Abstract: Modern communication networks require high performance and scalable electro-optic modulators that convert electrical signals to optical signals at high speed. Existing lithium niobate modulators have excellent performance but are bulky and prohibitively expensive to scale up. Here we demonstrate scalable and high-performance nanophotonic electro-optic modulators made of single-crystalline lithium… ▽ More Modern communication networks require high performance and scalable electro-optic modulators that convert electrical signals to optical signals at high speed. Existing lithium niobate modulators have excellent performance but are bulky and prohibitively expensive to scale up. Here we demonstrate scalable and high-performance nanophotonic electro-optic modulators made of single-crystalline lithium niobate microring resonators and micro-Mach-Zehnder interferometers. We show a half-wave electro-optic modulation efficiency of 1.8V$\cdot$cm and data rates up to 40 Gbps. △ Less

Submitted 23 January, 2017; originally announced January 2017.

Comments: 6 pages, 4 figures

On-chip dual comb source for spectroscopy

Authors: Avik Dutt, Chaitanya Joshi, Xingchen Ji, Jaime Cardenas, Yoshitomo Okawachi, Kevin Luke, Alexander L. Gaeta, Michal Lipson

Abstract: Dual-comb spectroscopy is a powerful technique for real-time, broadband optical sampling of molecular spectra which requires no moving components. Recent developments with microresonator-based platforms have enabled frequency combs at the chip scale. However, the need to precisely match the resonance wavelengths of distinct high-quality-factor microcavities has hindered the development of an on-ch… ▽ More Dual-comb spectroscopy is a powerful technique for real-time, broadband optical sampling of molecular spectra which requires no moving components. Recent developments with microresonator-based platforms have enabled frequency combs at the chip scale. However, the need to precisely match the resonance wavelengths of distinct high-quality-factor microcavities has hindered the development of an on-chip dual comb source. Here, we report the first simultaneous generation of two microresonator combs on the same chip from a single laser. The combs span a broad bandwidth of 51 THz around a wavelength of 1.56 $μ$m. We demonstrate low-noise operation of both frequency combs by deterministically tuning into soliton mode-locked states using integrated microheaters, resulting in narrow ($<$ 10 kHz) microwave beatnotes. We further use one mode-locked comb as a reference to probe the formation dynamics of the other comb, thus introducing a technique to investigate comb evolution without auxiliary lasers or microwave oscillators. We demonstrate broadband high-SNR absorption spectroscopy of dichloromethane spanning 170 nm using the dual comb source over a 20 $μ$s acquisition time. Our device paves the way for compact and robust dual-comb spectrometers at nanosecond timescales. △ Less

Submitted 23 November, 2016; originally announced November 2016.

Journal ref: Science Advances 4, 3, e1701858 (2018)

Dynamics of mode-coupling-induced microresonator frequency combs in normal dispersion

Authors: Jae K. Jang, Yoshitomo Okawachi, Mengjie Yu, Kevin Luke, Xingchen Ji, Michal Lipson, Alexander L. Gaeta

Abstract: We experimentally and theoretically investigate the dynamics of microresonator-based frequency comb generation assisted by mode coupling in the normal group-velocity dispersion (GVD) regime. We show that mode coupling can initiate intracavity modulation instability (MI) by directly perturbing the pump-resonance mode. We also observe the formation of a low-noise comb as the pump frequency is tuned… ▽ More We experimentally and theoretically investigate the dynamics of microresonator-based frequency comb generation assisted by mode coupling in the normal group-velocity dispersion (GVD) regime. We show that mode coupling can initiate intracavity modulation instability (MI) by directly perturbing the pump-resonance mode. We also observe the formation of a low-noise comb as the pump frequency is tuned further into resonance from the MI point. We determine the phase-matching conditions that accurately predict all the essential features of the MI and comb spectra, and extend the existing analogy between mode coupling and high-order dispersion to the normal GVD regime. We discuss the applicability of our analysis to the possibility of broadband comb generation in the normal GVD regime. △ Less

Submitted 4 October, 2016; originally announced October 2016.

Comments: 10 pages, 6 figures

Journal ref: Opt. Express 24(25), 28794-28803 (2016)

Silicon-chip-based mid-infrared dual-comb spectroscopy

Authors: Mengjie Yu, Yoshitomo Okawachi, Austin G. Griffith, Nathalie Picqué, Michal Lipson, Alexander L. Gaeta

Abstract: On-chip spectroscopy that could realize real-time fingerprinting with label-free and high-throughput detection of trace molecules is one of the 'holy grails" of sensing. Such miniaturized spectrometers would greatly enable applications in chemistry, bio-medicine, material science or space instrumentation, such as hyperspectral microscopy of live cells or pharmaceutical quality control. Dual-comb s… ▽ More On-chip spectroscopy that could realize real-time fingerprinting with label-free and high-throughput detection of trace molecules is one of the 'holy grails" of sensing. Such miniaturized spectrometers would greatly enable applications in chemistry, bio-medicine, material science or space instrumentation, such as hyperspectral microscopy of live cells or pharmaceutical quality control. Dual-comb spectroscopy (DCS), a recent technique of Fourier transform spectroscopy without moving parts, is particularly promising since it measures high-precision spectra in the gas phase using only a single detector. Here, we present a microresonator-based platform designed for mid-infrared (mid-IR) DCS. A single continuous-wave (CW) low-power pump source generates two mutually coherent mode-locked frequency combs spanning from 2.6 $μ$m to 4.1 $μ$m in two silicon micro-resonators. Thermal control and free-carrier injection control modelocking of each comb and tune the dual-comb parameters. The large line spacing of the combs (127 GHz) and its precise tuning over tens of MHz, unique features of chip-scale comb generators, are exploited for a proof-of-principle experiment of vibrational absorption DCS in the liquid phase, with spectra of acetone spanning from 2870 nm to 3170 nm at 127-GHz (4.2-cm$^{-1}$) resolution. We take a significant step towards a broadband, mid-IR spectroscopy instrument on a chip. With further system development, our concept holds promise for real-time and time-resolved spectral acquisition on the nanosecond time scale. △ Less

Submitted 1 May, 2017; v1 submitted 4 October, 2016; originally announced October 2016.

Breaking the Loss Limitation of On-chip High-confinement Resonators

Authors: Xingchen Ji, Felippe A. S. Barbosa, Samantha P. Roberts, Avik Dutt, Jaime Cardenas, Yoshitomo Okawachi, Alex Bryant, Alexander L. Gaeta, Michal Lipson

Abstract: On-chip optical resonators have the promise of revolutionizing numerous fields including metrology and sensing; however, their optical losses have always lagged behind their larger discrete resonator counterparts based on crystalline materials and flowable glass. Silicon nitride (Si3N4) ring resonators open up capabilities for optical routing, frequency comb generation, optical clocks and high pre… ▽ More On-chip optical resonators have the promise of revolutionizing numerous fields including metrology and sensing; however, their optical losses have always lagged behind their larger discrete resonator counterparts based on crystalline materials and flowable glass. Silicon nitride (Si3N4) ring resonators open up capabilities for optical routing, frequency comb generation, optical clocks and high precision sensing on an integrated platform. However, simultaneously achieving high quality factor and high confinement in Si3N4 (critical for nonlinear processes for example) remains a challenge. Here, we show that addressing surface roughness enables us to overcome the loss limitations and achieve high-confinement, on-chip ring resonators with a quality factor (Q) of 37 million for a ring with 2.5 μm width and 67 million for a ring with 10 μm width. We show a clear systematic path for achieving these high quality factors. Furthermore, we extract the loss limited by the material absorption in our films to be 0.13 dB/m, which corresponds to an absorption limited Q of at least 170 million by comparing two resonators with different degrees of confinement. Our work provides a chip-scale platform for applications such as ultra-low power frequency comb generation, high precision sensing, laser stabilization and sideband resolved optomechanics. △ Less

Submitted 27 September, 2016; originally announced September 2016.

Journal ref: Optica 4(6), 619-624 (2017)

Breather soliton dynamics in microresonators

Authors: Mengjie Yu, Jae K. Jang, Yoshitomo Okawachi, Austin G. Griffith, Kevin Luke, Steven A. Miller, Xingchen Ji, Michal Lipson, Alexander L. Gaeta

Abstract: The generation of temporal cavity solitons in microresonators results in low-noise optical frequency combs which are critical for applications in spectroscopy, astronomy, navigation or telecommunications. Breather solitons also form an important part of many different classes of nonlinear wave systems with a localized temporal structure that exhibits oscillatory behavior. To date, the dynamics of… ▽ More The generation of temporal cavity solitons in microresonators results in low-noise optical frequency combs which are critical for applications in spectroscopy, astronomy, navigation or telecommunications. Breather solitons also form an important part of many different classes of nonlinear wave systems with a localized temporal structure that exhibits oscillatory behavior. To date, the dynamics of breather solitons in microresonators remains largely unexplored, and its experimental characterization is challenging. Here, we demonstrate the excitation of breather solitons in two different microresonator platforms based on silicon nitride and on silicon. We investigate the dependence of the breathing frequency on pump detuning and observe the transition from period-1 to period-2 oscillation in good agreement with the numerical simulations. Our study presents experimental confirmation of the stability diagram of dissipative cavity solitons predicted by the Lugiato-Lefever equation and is importance to understanding the fundamental dynamical properties of solitons within the larger context of nonlinear science. △ Less

Submitted 6 September, 2016; originally announced September 2016.

Comments: 18 pages, 5 figures

Modelocked mid-infrared frequency combs in a silicon microresonator

Authors: Mengjie Yu, Yoshitomo Okawachi, Austin G. Griffith, Michal Lipson, Alexander L. Gaeta

Abstract: Mid-infrared (mid-IR) frequency combs have broad applications in molecular spectroscopy and chemical/biological sensing. Recently developed microresonator-based combs in this wavelength regime could enable portable and robust devices using a single-frequency pump field. Here, we report the first demonstration of a modelocked microresonator-based frequency comb in the mid-IR spanning 2.4 μm to 4.3… ▽ More Mid-infrared (mid-IR) frequency combs have broad applications in molecular spectroscopy and chemical/biological sensing. Recently developed microresonator-based combs in this wavelength regime could enable portable and robust devices using a single-frequency pump field. Here, we report the first demonstration of a modelocked microresonator-based frequency comb in the mid-IR spanning 2.4 μm to 4.3 μm. We observe high pump-to-comb conversion efficiency, in which 40% of the pump power is converted to the output comb power. Utilizing an integrated PIN structure allows for tuning the silicon microresonator and controling modelocking and cavity soliton formation, simplifying the generation, monitoring and stabilization of mid-IR frequency combs via free-carrier detection and control. Our results significantly advance microresonator-based comb technology towards a portable and robust mid-IR spectroscopic device that operates at low pump powers. △ Less

Submitted 21 April, 2016; originally announced April 2016.

Comments: 8 pages, 5 figures

Raman-assisted coherent, mid-infrared frequency combs in silicon microresonators

Authors: Austin G. Griffith, Mengjie Yu, Yoshitomo Okawachi, Jaime Cardenas, Aseema Mohanty, Alexander L. Gaeta, Michal Lipson

Abstract: We demonstrate the first low-noise mid-IR frequency comb source using a silicon microresonator. Our observation of strong Raman scattering lines in the generated comb suggests that Raman and four-wave mixing interactions play a role in assisting the transition to the low-noise state. In addition, we characterize, the intracavity comb generation dynamics using an integrated PIN diode, which takes a… ▽ More We demonstrate the first low-noise mid-IR frequency comb source using a silicon microresonator. Our observation of strong Raman scattering lines in the generated comb suggests that Raman and four-wave mixing interactions play a role in assisting the transition to the low-noise state. In addition, we characterize, the intracavity comb generation dynamics using an integrated PIN diode, which takes advantage of the inherent three-photon absorption process in silicon. △ Less

Submitted 21 April, 2016; originally announced April 2016.

Comments: 7 pages, 5 figures

Thermally Controlled Comb Generation and Soliton Modelocking in Microresonators

Authors: Chaitanya Joshi, Jae K. Jang, Kevin Luke, Xingchen Ji, Steven A. Miller, Alexander Klenner, Yoshitomo Okawachi, Michal Lipson, Alexander L. Gaeta

Abstract: We report the first demonstration of thermally controlled soliton modelocked frequency comb generation in microresonators. By controlling the electric current through heaters integrated with silicon nitride microresonators, we demonstrate a systematic and repeatable pathway to single- and multi-soliton modelocked states without adjusting the pump laser wavelength. Such an approach could greatly si… ▽ More We report the first demonstration of thermally controlled soliton modelocked frequency comb generation in microresonators. By controlling the electric current through heaters integrated with silicon nitride microresonators, we demonstrate a systematic and repeatable pathway to single- and multi-soliton modelocked states without adjusting the pump laser wavelength. Such an approach could greatly simplify the generation of modelocked frequency combs and facilitate applications such as chip-based dual-comb spectroscopy. △ Less

Submitted 21 April, 2016; v1 submitted 25 March, 2016; originally announced March 2016.

Comments: 5 pages, 6 figures

Quantum Interference between Transverse Spatial Waveguide Modes

Authors: Aseema Mohanty, Mian Zhang, Avik Dutt, Sven Ramelow, Paulo Nussenzveig, Michal Lipson

Abstract: Integrated quantum optics has drastically reduced the size of table-top optical experiments to the chip-scale, allowing for demonstrations of large-scale quantum information processing and quantum simulation. However, despite these advances, practical implementations of quantum photonic circuits remain limited because they consist of large networks of waveguide interferometers that path encode inf… ▽ More Integrated quantum optics has drastically reduced the size of table-top optical experiments to the chip-scale, allowing for demonstrations of large-scale quantum information processing and quantum simulation. However, despite these advances, practical implementations of quantum photonic circuits remain limited because they consist of large networks of waveguide interferometers that path encode information which do not easily scale. Increasing the dimensionality of current quantum systems using higher degrees of freedom such as transverse spatial field distribution, polarization, time, and frequency to encode more information per carrier will enable scalability by simplifying quantum computational architectures, increasing security and noise tolerance in quantum communication channels, and simulating richer quantum phenomena. Here we demonstrate a scalable platform for photonic quantum information processing using waveguide quantum circuit building blocks based on the transverse spatial mode degree of freedom: mode multiplexers and mode beamsplitters. A multimode waveguide is inherently a densely packed system of spatial and polarization modes that can be coupled by perturbations to the waveguide. We design a multimode waveguide consisting of three spatial modes (per polarization) and a nanoscale grating beamsplitter to show tunable quantum interference between pairs of photons in different transverse spatial modes. We also cascade these structures and demonstrate NOON state interferometry within a multimode waveguide. These devices have potential to perform transformations on more modes and be integrated with existing architectures, providing a scalable path to higher-dimensional Hilbert spaces and entanglement. △ Less

Submitted 1 January, 2016; originally announced January 2016.

Comments: 11 pages, 6 figures

Long-range Synchronization of Nanomechanical Oscillators with Light

Authors: Shreyas Y. Shah, Mian Zhang, Richard Rand, Michal Lipson

Abstract: We experimentally demonstrate mutual synchronization of two free-running nanomechanical oscillators separated by an effective distance of 30 meters and coupled through light. Due to the finite speed of light, the large separation introduces a significant coupling delay of 139 nanoseconds, approximately four and a half times the mechanical oscillation time period. We reveal multiple stable states o… ▽ More We experimentally demonstrate mutual synchronization of two free-running nanomechanical oscillators separated by an effective distance of 30 meters and coupled through light. Due to the finite speed of light, the large separation introduces a significant coupling delay of 139 nanoseconds, approximately four and a half times the mechanical oscillation time period. We reveal multiple stable states of synchronized oscillations, enabled by delayed coupling, with distinct synchronization frequency in the coupled system. These states are accessed by tuning independently the directional coupling strengths. Our results demonstrate rich dynamics and could enable applications in reconfigurable radio-frequency networks and novel computing concepts. △ Less

Submitted 15 May, 2017; v1 submitted 26 November, 2015; originally announced November 2015.