Showing 1–9 of 9 results for author: Lipa, J A

The Design of a Drag-Free CubeSat and the Housing for its Gravitational Reference Sensor

Authors: Carlo Zanoni, Abdul Alfauwaz, Ahmad Aljadaan, Salman Althubiti, Karthik Balakrishnan, Sasha Buchman, Robert L. Byer, John W. Conklin, Grant D. Cutler, Dan DeBra, Eric Hultgren, John A. Lipa, Shailendhar Saraf, Andreas Zoellner

Abstract: A Drag-Free CubeSat mission has been proposed to demonstrate the feasibility of a Gravitational Reference Sensor (GRS) with an optical readout for a 3 units (3U) spacecraft. A purely drag-free object is defined by the absence of all external forces other than gravity, which are shielded by the spacecraft. In a real case, the TM will still be affected by disturbances. Several of them are passively… ▽ More A Drag-Free CubeSat mission has been proposed to demonstrate the feasibility of a Gravitational Reference Sensor (GRS) with an optical readout for a 3 units (3U) spacecraft. A purely drag-free object is defined by the absence of all external forces other than gravity, which are shielded by the spacecraft. In a real case, the TM will still be affected by disturbances. Several of them are passively reduced by the design of the TM housing. This system is a thick-walled aluminium box that holds the shadow sensors and shields the TM. The housing has an effect on the mechanical, thermal and magnetic environment around the TM. All of them have been analysed. The mechanical vibrations have to fit the launch environment and the modes have to be outside of the measurement range (0.0001 - 1 Hz). The magnetic field has to be reduced by a 0.01 factor. The temperature difference between internal opposing surfaces, determining pressure on the TM, has to be below 10^-3(1 mHz/f)1/3 K Hz^-1/2. The housing, together with the TM, the sensors and the UV LEDs for charging control, constitutes the GRS, which would then fit into a 1U. The other 2Us are occupied by the caging mechanism that constraints the TM during launch, the thrusters, the Attitude Determination And Control System (ADACS) and the electronics. The Drag-Free CubeSat will be the result of the combined efforts of Stanford, University of Florida, KACST and NASA and will be the first drag-free mission with an optical readout and the first GRS designed within the limits of a 3U small satellite. In the first section, this paper briefly updates on the main characteristics and systems of the project. Particular emphasis is then given to the recently designed housing, its expected performance and the open issues. △ Less

Submitted 18 May, 2016; originally announced May 2016.

Comments: 2nd IAA conference on University Satellites. Proceedings of 2nd IAA conference on University Satellites, 2013

Report number: IAA-CU-13-12-01

LISA-2020: An Intermediate Scale Space Gravitational Wave Observatory for This Decade

Authors: S. Buchman, J. A. Lipa, R. L. Byer, D. DeBra, K. Balakrishnan, G. Dufresne Cutler, A. Al-Fauwaz, E. Hultgren, A. K. Al-Jadaan, S. Saraf, S. Tan, S. Al-Thubiti, A. Zoellner

Abstract: Over the last three decades, an exceptionally good science case has been made for pursuing gravitational wave (GW) astronomy. This has engendered a worldwide effort to detect the extremely weak signals generated by expected sources. With the next round of upgrades the ground based instruments are likely to make the first detections of the sources, and a new era of astronomy will begin, possibly as… ▽ More Over the last three decades, an exceptionally good science case has been made for pursuing gravitational wave (GW) astronomy. This has engendered a worldwide effort to detect the extremely weak signals generated by expected sources. With the next round of upgrades the ground based instruments are likely to make the first detections of the sources, and a new era of astronomy will begin, possibly as early as 2017. Inconveniently, due to seismic noise and baseline length issues, the low frequency (<10Hz) part of the spectrum, where the most interesting events are expected, will not be accessible. The space-based detector, LISA1, was conceived to fill this gap extending the observational capability to about 10-4 Hz. Due to mission cost growth and severe budget constraints, a flight prior to 2030 now seems very unlikely. This paper examines the case for a scaled down mission that is comparable in cost and duration to medium scale astrophysics missions such as the 1978 ($630M) Einstein (HEAO 2) x-ray Observatory2, the 1989 ($680M) COBE Cosmic Background Explorer3, and the 1999 ($420M) FUSE Far Ultraviolet Spectroscopic Explorer4. We find that a mission of this class is possible if the measurement requirements are somewhat relaxed and a baseline smaller than LISA is used. It appears that such a mission could be launched by 2020 using a conventional program development plan, possibly including international collaboration. It would enable the timely development of this game-changing field of astrophysics, complementing the expected ground results with observations of massive black hole collisions. It would also serve as a step** stone to LISA, greatly reducing the risk profile of that mission. △ Less

Submitted 10 February, 2013; originally announced February 2013.

Corner-cube retro-reflector instrument for advanced lunar laser ranging

Authors: Slava G. Turyshev, James G. Williams, William M. Folkner, Gary M. Gutt, Richard T. Baran, Randall C. Hein, Ruwan P. Somawardhana, John A. Lipa, Suwen Wang

Abstract: Lunar laser ranging (LLR) has made major contributions to our understanding of the Moon's internal structure and the dynamics of the Earth-Moon system. Because of the recent improvements of the ground-based laser ranging facilities, the present LLR measurement accuracy is limited by the retro-reflectors currently on the lunar surface, which are arrays of small corner-cubes. Because of lunar librat… ▽ More Lunar laser ranging (LLR) has made major contributions to our understanding of the Moon's internal structure and the dynamics of the Earth-Moon system. Because of the recent improvements of the ground-based laser ranging facilities, the present LLR measurement accuracy is limited by the retro-reflectors currently on the lunar surface, which are arrays of small corner-cubes. Because of lunar librations, the surfaces of these arrays do not, in general, point directly at the Earth. This effect results in a spread of arrival times, because each cube that comprises the retroreflector is at a slightly different distance from the Earth, leading to the reduced ranging accuracy. Thus, a single, wide aperture corner-cube could have a clear advantage. In addition, after nearly four decades of successful operations the retro-reflectors arrays currently on the Moon started to show performance degradation; as a result, they yield still useful, but much weaker return signals. Thus, fresh and bright instruments on the lunar surface are needed to continue precision LLR measurements. We have developed a new retro-reflector design to enable advanced LLR operations. It is based on a single, hollow corner cube with a large aperture for which preliminary thermal, mechanical, and optical design and analysis have been performed. The new instrument will be able to reach an Earth-Moon range precision of 1-mm in a single pulse while being subjected to significant thermal variations present on the lunar surface, and will have low mass to allow robotic deployment. Here we report on our design results and instrument development effort. △ Less

Submitted 1 November, 2012; v1 submitted 29 October, 2012; originally announced October 2012.

Comments: 19 pages, 18 figures, 5 tables

Journal ref: Experimental Astronomy 36(1), 105-135 (2013)

Prospects for an advanced Kennedy-Thorndike experiment in low Earth orbit

Authors: J. A. Lipa, S. Buchman, S. Saraf, J. Zhou, A. Alfauwaz, J. Conklin, G. D. Cutler, R. L. Byer

Abstract: We discuss the potential for a small space mission to perform an advanced Kennedy-Thorndike test of Special Relativity using the large and rapid velocity modulation available in low Earth orbit. An improvement factor of ~100 over present ground results is expected, with an additional factor of 10 possible using more advanced technology. We discuss the potential for a small space mission to perform an advanced Kennedy-Thorndike test of Special Relativity using the large and rapid velocity modulation available in low Earth orbit. An improvement factor of ~100 over present ground results is expected, with an additional factor of 10 possible using more advanced technology. △ Less

Submitted 17 March, 2012; originally announced March 2012.

LAGRANGE: LAser GRavitational-wave ANtenna at GEo-lunar Lagrange points

Authors: J. W. Conklin, S. Buchman, V. Aguero, A. Alfauwaz, A. Aljadaan, M. Almajed, H. Altwaijry, T. Al-Saud, K. Balakrishnan, R. L. Byer, K. Bower, B. Costello, G. D. Cutler, D. B. DeBra, D. M. Faied, C. Foster, A. L. Genova, J. Hanson, K. Hooper, E. Hultgren, B. Jaroux, A. Klavins, B. Lantz, J. A. Lipa, A. Palmer , et al. (14 additional authors not shown)

Abstract: We describe a new space gravitational wave observatory design called LAGRANGE that maintains all important LISA science at about half the cost and with reduced technical risk. It consists of three drag-free spacecraft in the most stable geocentric formation, the Earth-Moon L3, L4, and L5 Lagrange points. Fixed antennas allow continuous contact with the Earth, solving the problem of communications… ▽ More We describe a new space gravitational wave observatory design called LAGRANGE that maintains all important LISA science at about half the cost and with reduced technical risk. It consists of three drag-free spacecraft in the most stable geocentric formation, the Earth-Moon L3, L4, and L5 Lagrange points. Fixed antennas allow continuous contact with the Earth, solving the problem of communications bandwidth and latency. A 70 mm diameter AuPt sphere with a 35 mm gap to its enclosure serves as a single inertial reference per spacecraft, which is operated in "true" drag-free mode (no test mass forcing). This is the core of the Modular Gravitational Reference Sensor whose other advantages are: a simple caging design based on the DISCOS 1972 drag-free mission, an all optical read-out with pm fine and nm coarse sensors, and the extensive technology heritage from the Honeywell gyroscopes, and the DISCOS and Gravity Probe B drag-free sensors. An Interferometric Measurement System, designed with reflective optics and a highly stabilized frequency standard, performs the inter-test mass ranging and requires a single optical bench with one laser per spacecraft. Two 20 cm diameter telescopes per spacecraft, each with in-field pointing, incorporate novel technology developed for advanced optical systems by Lockheed Martin, who also designed the spacecraft based on a multi-flight proven bus structure. Additional technological advancements include the drag-free propulsion, thermal control, charge management systems, and materials. LAGRANGE sub-systems are designed to be scalable and modular, making them interchangeable with those of LISA or other gravitational science missions. We plan to space qualify critical technologies on small and nano satellite flights, with the first launch (UV-LED Sat) in 2013. △ Less

Submitted 5 December, 2011; v1 submitted 22 November, 2011; originally announced November 2011.

Comments: 24 pages, to be submitted to Classical and Quantum Gravity

Gravity Probe B: Final Results of a Space Experiment to Test General Relativity

Authors: C. W. F. Everitt, D. B. DeBra, B. W. Parkinson, J. P. Turneaure, J. W. Conklin, M. I. Heifetz, G. M. Keiser, A. S. Silbergleit, T. Holmes, J. Kolodziejczak, M. Al-Meshari, J. C. Mester, B. Muhlfelder, V. Solomonik, K. Stahl, P. Worden, W. Bencze, S. Buchman, B. Clarke, A. Al-Jadaan, H. Al-Jibreen, J. Li, J. A. Lipa, J. M. Lockhart, B. Al-Suwaidan , et al. (2 additional authors not shown)

Abstract: Gravity Probe B, launched 20 April 2004, is a space experiment testing two fundamental predictions of Einstein's theory of General Relativity (GR), the geodetic and frame-dragging effects, by means of cryogenic gyroscopes in Earth orbit. Data collection started 28 August 2004 and ended 14 August 2005. Analysis of the data from all four gyroscopes results in a geodetic drift rate of -6,601.8+/- 18.… ▽ More Gravity Probe B, launched 20 April 2004, is a space experiment testing two fundamental predictions of Einstein's theory of General Relativity (GR), the geodetic and frame-dragging effects, by means of cryogenic gyroscopes in Earth orbit. Data collection started 28 August 2004 and ended 14 August 2005. Analysis of the data from all four gyroscopes results in a geodetic drift rate of -6,601.8+/- 18.3 mas/yr and a frame-dragging drift rate of -37.2 +/- 7.2 mas/yr, to be compared with the GR predictions of -6,606.1 mas/yr and -39.2 mas/yr, respectively (`mas' is milliarc-second; 1mas = 4.848 x 10-9 rad). △ Less

Submitted 17 May, 2011; originally announced May 2011.

Journal ref: Phys.Rev.Lett.106:221101,2011

Space-based research in fundamental physics and quantum technologies

Authors: S. G. Turyshev, U. E. Israelsson, M. Shao, N. Yu, A. Kusenko, E. L. Wright, C. W. F. Everitt, M. A. Kasevich, J. A. Lipa, J. C. Mester, R. D. Reasenberg, R. L. Walsworth, N. Ashby, H. Gould, H. -J. Paik

Abstract: Space-based experiments today can uniquely address important questions related to the fundamental laws of Nature. In particular, high-accuracy physics experiments in space can test relativistic gravity and probe the physics beyond the Standard Model; they can perform direct detection of gravitational waves and are naturally suited for precision investigations in cosmology and astroparticle physi… ▽ More Space-based experiments today can uniquely address important questions related to the fundamental laws of Nature. In particular, high-accuracy physics experiments in space can test relativistic gravity and probe the physics beyond the Standard Model; they can perform direct detection of gravitational waves and are naturally suited for precision investigations in cosmology and astroparticle physics. In addition, atomic physics has recently shown substantial progress in the development of optical clocks and atom interferometers. If placed in space, these instruments could turn into powerful high-resolution quantum sensors greatly benefiting fundamental physics. We discuss the current status of space-based research in fundamental physics, its discovery potential, and its importance for modern science. We offer a set of recommendations to be considered by the upcoming National Academy of Sciences' Decadal Survey in Astronomy and Astrophysics. In our opinion, the Decadal Survey should include space-based research in fundamental physics as one of its focus areas. We recommend establishing an Astronomy and Astrophysics Advisory Committee's interagency ``Fundamental Physics Task Force'' to assess the status of both ground- and space-based efforts in the field, to identify the most important objectives, and to suggest the best ways to organize the work of several federal agencies involved. We also recommend establishing a new NASA-led interagency program in fundamental physics that will consolidate new technologies, prepare key instruments for future space missions, and build a strong scientific and engineering community. Our goal is to expand NASA's science objectives in space by including ``laboratory research in fundamental physics'' as an element in agency's ongoing space research efforts. △ Less

Submitted 3 March, 2008; v1 submitted 1 November, 2007; originally announced November 2007.

Comments: a white paper, revtex, 27 pages, updated bibliography

Journal ref: Int.J.Mod.Phys.D16:1879-1925,2008

Specific Heat of Liquid Helium in Zero Gravity very near the Lambda Point

Authors: J. A. Lipa, J. A. Nissen, D. A. Stricker, D. R. Swanson, T. C. P. Chui

Abstract: We report the details and revised analysis of an experiment to measure the specific heat of helium with subnanokelvin temperature resolution near the lambda point. The measurements were made at the vapor pressure spanning the region from 22 mK below the superfluid transition to 4 uK above. The experiment was performed in earth orbit to reduce the rounding of the transition caused by gravitationa… ▽ More We report the details and revised analysis of an experiment to measure the specific heat of helium with subnanokelvin temperature resolution near the lambda point. The measurements were made at the vapor pressure spanning the region from 22 mK below the superfluid transition to 4 uK above. The experiment was performed in earth orbit to reduce the rounding of the transition caused by gravitationally induced pressure gradients on earth. Specific heat measurements were made deep in the asymptotic region to within 2 nK of the transition. No evidence of rounding was found to this resolution. The optimum value of the critical exponent describing the specific heat singularity was found to be a = -0.0127+ - 0.0003. This is bracketed by two recent estimates based on renormalization group techniques, but is slightly outside the range of the error of the most recent result. The ratio of the coefficients of the leading order singularity on the two sides of the transition is A+/A- =1.053+ - 0.002, which agrees well with a recent estimate. By combining the specific heat and superfluid density exponents a test of the Josephson scaling relation can be made. Excellent agreement is found based on high precision measurements of the superfluid density made elsewhere. These results represent the most precise tests of theoretical predictions for critical phenomena to date. △ Less

Submitted 7 October, 2003; originally announced October 2003.

Comments: 27 Pages, 20 Figures

A New Limit on Signals of Lorentz Violation in Electrodynamics

Authors: J. A. Lipa, J. A. Nissen, S. Wang, D. A. Stricker, D. Avaloff

Abstract: We describe the results of an experiment to test for spacetime anisotropy terms that might exist from Lorentz violations. The apparatus consists of a pair of cylindrical superconducting cavity-stabilized oscillators operating in the TM_{010} mode with one axis east-west and the other vertical. Spatial anisotropy is detected by monitoring the beat frequency at the sidereal rate and its first harm… ▽ More We describe the results of an experiment to test for spacetime anisotropy terms that might exist from Lorentz violations. The apparatus consists of a pair of cylindrical superconducting cavity-stabilized oscillators operating in the TM_{010} mode with one axis east-west and the other vertical. Spatial anisotropy is detected by monitoring the beat frequency at the sidereal rate and its first harmonic. We see no anisotropy to a part in 10^{13}. This puts a comparable bound on four linear combinations of parameters in the general Standard Model extension, and a weaker bound of <4 x 10^{-9} on three others. △ Less

Submitted 26 February, 2003; originally announced February 2003.

Comments: 4 pages, 3 figures, 2 tables

Journal ref: Phys.Rev.Lett.90:060403,2003