-
Interlayer Coupling and Strain Localization in Small-Twist-Angle Graphene Flakes
Authors:
Vahid Morovati,
Zhiming Xue,
Kenneth M. Liechti,
Rui Huang
Abstract:
Twisted bilayer graphene (TBG) exhibits a wide range of intriguing physical properties, such as superconductivity, ferromagnetism, and superlubricity. Depending on the twist angle, periodic moiré superlattices form in twisted bilayer graphene, with inhomogeneous interlayer coupling and lattice deformation. For a small twist angle (typically <2°), each moiré supercell contains a large number of ato…
▽ More
Twisted bilayer graphene (TBG) exhibits a wide range of intriguing physical properties, such as superconductivity, ferromagnetism, and superlubricity. Depending on the twist angle, periodic moiré superlattices form in twisted bilayer graphene, with inhomogeneous interlayer coupling and lattice deformation. For a small twist angle (typically <2°), each moiré supercell contains a large number of atoms (>10,000), making it computationally expensive for first-principles and atomistic modeling. In this work, a finite element method based on a continuum model is used to simulate the inhomogeneous interlayer and intralayer deformations of twisted graphene flakes on a rigid graphene substrate. The van der Waals interactions between the graphene layers are described by a periodic potential energy function, whereas the graphene flake is treated as a continuum membrane with effective elastic properties. Our simulations show that structural relaxation and the induced strain localization are most significant in a relatively large graphene flake at small twist angles, where the strain distribution is highly localized as shear strain solitons along the boundaries between neighboring domains of commensurate AB stacking. Moreover, it is found that there exist many metastable equilibrium configurations at particular twist angles, depending on the flake size. The nonlinear mechanics of twisted bilayer graphene is thus expected to be essential for understanding the strain distributions in the moiré superlattices and the strain effects on other physical properties.
△ Less
Submitted 6 June, 2022;
originally announced June 2022.
-
From Stoop to Squat: A comprehensive analysis of lumbar loading among different lifting styles
Authors:
Michael von Arx,
Melanie Liechti,
Lukas Connolly,
Christian Bangerter,
Michael L. Meier,
Stefan Schmid
Abstract:
Lifting up objects from the floor has been identified as a risk factor for low back pain, whereby a flexed spine during lifting is often associated with producing higher loads in the lumbar spine. Even though recent biomechanical studies challenge these assumptions, conclusive evidence is still lacking. This study therefore aimed at comparing lumbar loads among different lifting styles using a com…
▽ More
Lifting up objects from the floor has been identified as a risk factor for low back pain, whereby a flexed spine during lifting is often associated with producing higher loads in the lumbar spine. Even though recent biomechanical studies challenge these assumptions, conclusive evidence is still lacking. This study therefore aimed at comparing lumbar loads among different lifting styles using a comprehensive state-of-the-art motion capture-driven musculoskeletal modeling approach. Thirty healthy pain-free individuals were enrolled in this study and asked to repetitively lift a 15 kg-box by applying 1) a freestyle, 2) a squat and 3) a stoop lifting technique. Whole-body kinematics were recorded using an optical motion capture system and used to drive a full-body musculoskeletal model including a detailed thoracolumbar spine. Compressive, shear and total loads were calculated based on a static optimization approach and expressed as factor body weight (BW). In addition, lumbar lordosis angles and total lifting time were calculated. All parameters were compared among the lifting styles using a repeated measures design. For all lumbar segments, stoop lifting showed significantly lower compressive and total loads (-0.3 to -1.0BW) when compared to freestyle and squat lifting. Stoop lifting produced higher shear loads (+0.1 to +0.8BW) in the segments T12/L1 to L4/L5, but lower loads in L5/S1 (-0.2 to -0.4BW). Peak compressive and total loads during squat lifting occurred approximately 30% earlier in the lifting cycle compared to stoop lifting. Stoop lifting showed larger lumbar lordosis range of motion (35.9+/-10.1°) than freestyle (24.2+/-7.3°) and squat (25.1+/-8.2°) lifting. Lifting time differed significantly with freestyle being executed the fastest (4.6+/-0.7s), followed by squat (4.9+/-0.7s) and stoop (5.9+/-1.1s).
△ Less
Submitted 1 September, 2021;
originally announced September 2021.
-
Data Driven Modeling of Interfacial Traction Separation Relations using a Thermodynamically Consistent Neural Network
Authors:
Congjie Wei,
Jiaxin Zhang,
Kenneth M. Liechti,
Chenglin Wu
Abstract:
For multilayer structures, interfacial failure is one of the most important elements related to device reliability. For cohesive zone modelling, traction-separation relations represent the adhesive interactions across interfaces. However, existing theoretical models do not currently capture traction-separation relations that have been extracted using direct methods, particularly under mixed-mode c…
▽ More
For multilayer structures, interfacial failure is one of the most important elements related to device reliability. For cohesive zone modelling, traction-separation relations represent the adhesive interactions across interfaces. However, existing theoretical models do not currently capture traction-separation relations that have been extracted using direct methods, particularly under mixed-mode conditions. Given the complexity of the problem, models derived from the neural network approach are attractive. Although they can be trained to fit data along the loading paths taken in a particular set of mixed-mode fracture experiments, they may fail to obey physical laws for paths not covered by the training data sets. In this paper, a thermodynamically consistent neural network (TCNN) approach is established to model the constitutive behavior of interfaces when faced with sparse training data sets. Accordingly, three conditions are examined and implemented here: (i) thermodynamic consistency, (ii) maximum energy dissipation path control and (iii) J-integral conservation. These conditions are treated as constraints and are implemented as such in the loss function. The feasibility of this approach is demonstrated by comparing the modeling results with a range of physical constraints. Moreover, a Bayesian optimization algorithm is then adopted to optimize the weight factors associated with each of the constraints in order to overcome convergence issues that can arise when multiple constraints are present. The resultant numerical implementation of the ideas presented here produced well-behaved, mixed-mode traction separation surfaces that maintained the fidelity of the experimental data that was provided as input. The proposed approach heralds a new autonomous, point-to-point constitutive modeling concept for interface mechanics.
△ Less
Submitted 29 December, 2022; v1 submitted 17 November, 2020;
originally announced November 2020.
-
Electrosense+: Crowdsourcing Radio Spectrum Decoding using IoT Receivers
Authors:
Roberto Calvo-Palomino,
Héctor Cordobés,
Markus Engel,
Markus Fuchs,
Pratiksha Jain,
Marc Liechti,
Sreeraj Rajendran,
Matthias Schäfer,
Bertold Van den Bergh,
Sofie Pollin,
Domenico Giustiniano,
Vincent Lenders
Abstract:
Web spectrum monitoring systems based on crowdsourcing have recently gained popularity. These systems are however limited to applications of interest for governamental organizationsor telecom providers, and only provide aggregated information about spectrum statistics. Theresult is that there is a lack of interest for layman users to participate, which limits its widespreaddeployment. We present E…
▽ More
Web spectrum monitoring systems based on crowdsourcing have recently gained popularity. These systems are however limited to applications of interest for governamental organizationsor telecom providers, and only provide aggregated information about spectrum statistics. Theresult is that there is a lack of interest for layman users to participate, which limits its widespreaddeployment. We present Electrosense+ which addresses this challenge and creates a general-purpose and open platform for spectrum monitoring using low-cost, embedded, and software-defined spectrum IoT sensors. Electrosense+ allows users to remotely decode specific parts ofthe radio spectrum. It builds on the centralized architecture of its predecessor, Electrosense, forcontrolling and monitoring the spectrum IoT sensors, but implements a real-time and peer-to-peercommunication system for scalable spectrum data decoding. We propose different mechanismsto incentivize the participation of users for deploying new sensors and keep them operational inthe Electrosense network. As a reward for the user, we propose an incentive accounting systembased on virtual tokens to encourage the participants to host IoT sensors. We present the newElectrosense+ system architecture and evaluate its performance at decoding various wireless sig-nals, including FM radio, AM radio, ADS-B, AIS, LTE, and ACARS.
△ Less
Submitted 11 May, 2020; v1 submitted 29 November, 2018;
originally announced November 2018.
-
A Review on Mechanics and Mechanical Properties of 2D Materials - Graphene and Beyond
Authors:
Deji Akinwande,
Christopher J. Brennan,
J. Scott Bunch,
Philip Egberts,
Jonathan R. Felts,
Huajian Gao,
Rui Huang,
Joon-Seok Kim,
Teng Li,
Yao Li,
Kenneth M. Liechti,
Nanshu Lu,
Harold S. Park,
Evan J. Reed,
Peng Wang,
Boris I. Yakobson,
Teng Zhang,
Yong-Wei Zhang,
Yao Zhou,
Yong Zhu
Abstract:
Since the first successful synthesis of graphene just over a decade ago, a variety of two-dimensional (2D) materials (e.g., transition metal-dichalcogenides, hexagonal boron-nitride, etc.) have been discovered. Among the many unique and attractive properties of 2D materials, mechanical properties play important roles in manufacturing, integration and performance for their potential applications. M…
▽ More
Since the first successful synthesis of graphene just over a decade ago, a variety of two-dimensional (2D) materials (e.g., transition metal-dichalcogenides, hexagonal boron-nitride, etc.) have been discovered. Among the many unique and attractive properties of 2D materials, mechanical properties play important roles in manufacturing, integration and performance for their potential applications. Mechanics is indispensable in the study of mechanical properties, both experimentally and theoretically. The coupling between the mechanical and other physical properties (thermal, electronic, optical) is also of great interest in exploring novel applications, where mechanics has to be combined with condensed matter physics to establish a scalable theoretical framework. Moreover, mechanical interactions between 2D materials and various substrate materials are essential for integrated device applications of 2D materials, for which the mechanics of interfaces (adhesion and friction) has to be developed for the 2D materials. Here we review recent theoretical and experimental works related to mechanics and mechanical properties of 2D materials. While graphene is the most studied 2D material to date, we expect continual growth of interest in the mechanics of other 2D materials beyond graphene.
△ Less
Submitted 4 November, 2016;
originally announced November 2016.
-
Cavitation of Water by Volume-Controlled Stretching
Authors:
Peng Wang,
Wei Gao,
Justin Wilkerson,
Kenneth M. Liechti,
Rui Huang
Abstract:
A liquid subjected to negative pressure is thermodynamically metastable. Confined within a small volume, negative pressure can build up until cavities form spontaneously. The critical negative pressure for cavitation in water has been theoretically predicted to be in the range of -100 to -200 MPa at room temperature, whereas values around -30 MPa have been obtained by many experiments. The discrep…
▽ More
A liquid subjected to negative pressure is thermodynamically metastable. Confined within a small volume, negative pressure can build up until cavities form spontaneously. The critical negative pressure for cavitation in water has been theoretically predicted to be in the range of -100 to -200 MPa at room temperature, whereas values around -30 MPa have been obtained by many experiments. The discrepancy has yet to be resolved. In this study we perform molecular dynamics simulations to study cavitation of water under volume controlled stretching. It is found that liquid water exhibits a nonlinear elastic compressibility (or stretchability) under hydrostatic tension and remains stable within the confined volume until spontaneous cavitation occurs at a critical strain. Subsequently, as the volume-controlled stretching continues, the cavity grows stably and the hydrostatic tension decreases continuously until the box volume is large enough for another transition to form a water droplet. A modified nucleation theory is proposed to predict the critical condition for cavitation. In particular, a strong dependence of the critical strain and stress for cavitation on the initial liquid volume is predicted by the modified nucleation theory, which may offer a possible explanation for the discrepancies in the values of the critical negative pressure obtained from experiments.
△ Less
Submitted 22 September, 2016;
originally announced September 2016.
-
Interfacial adhesion between graphene and silicon dioxide by density functional theory with van der Waals corrections
Authors:
Wei Gao,
Penghao Xiao,
Graeme Henkelman,
Kenneth M. Liechti,
Rui Huang
Abstract:
Interfacial adhesion between graphene and a SiO2 substrate is studied by density functional theory (DFT) with dispersion corrections. The results demonstrate the van der Waals (vdW) interaction as the predominate mechanism for the graphene/SiO2 interface. It is found that the interaction strength is strongly influenced by changes of the SiO2 surface structures due to surface reactions with water.…
▽ More
Interfacial adhesion between graphene and a SiO2 substrate is studied by density functional theory (DFT) with dispersion corrections. The results demonstrate the van der Waals (vdW) interaction as the predominate mechanism for the graphene/SiO2 interface. It is found that the interaction strength is strongly influenced by changes of the SiO2 surface structures due to surface reactions with water. The adhesion energy is reduced when the reconstructed SiO2 surface is hydroxylated, and further reduced when covered by a monolayer of adsorbed water molecules. Thus, the effect of humidity may help explain the wide variation of adhesion energies measured in recent experiments between graphene and SiO2. Moreover, it is noted that vdW forces are required to accurately model the graphene/SiO2 interface with DFT and that the adhesion energy is underestimated by empirical force fields commonly used in atomistic simulations.
△ Less
Submitted 14 March, 2014;
originally announced March 2014.