-
From eruption to post-flare rain: a 2.5D MHD model
Authors:
Samrat Sen,
Avijeet Prasad,
Valeriia Liakh,
Rony Keppens
Abstract:
The formation of the MFRs in the pre-flare stage, and how this leads to coronal rain in a post-eruption magnetic loop is not fully understood. We explore the formation, and eruption of MFRs, followed by the appearance of coronal rain in the post-flare loops, to understand the magnetic and thermodynamic properties of eruptive events and their multi-thermal aspects in the solar atmosphere. We perfor…
▽ More
The formation of the MFRs in the pre-flare stage, and how this leads to coronal rain in a post-eruption magnetic loop is not fully understood. We explore the formation, and eruption of MFRs, followed by the appearance of coronal rain in the post-flare loops, to understand the magnetic and thermodynamic properties of eruptive events and their multi-thermal aspects in the solar atmosphere. We perform a resistive-magnetohydrodynamic (MHD) simulation with the open-source code \texttt{MPI-AMRVAC} to explore the evolution of sheared magnetic arcades that can lead to flux rope eruptions. The system is in mechanical imbalance at the initial state, and evolves self-consistently in a non-adiabatic atmosphere under the influence of radiative losses, thermal conduction, and background heating. We use an additional level of adaptive mesh refinement to achieve the smallest cell size of $\approx 32.7$ km in each direction to reveal the fine structures in the system. The system achieves a semi-equilibrium state after a short transient evolution from its initial mechanically imbalanced condition. A series of erupting MFRs is formed due to spontaneous magnetic reconnection, across current sheets created underneath the erupting flux ropes. Gradual development of thermal imbalance is noticed at a loop top in the post-eruption phase, which leads to catastrophic cooling and formation of condensations. We obtain plasma blobs which fall down along the magnetic loop in the form of coronal rain. The dynamical and thermodynamic properties of these cool-condensations are in good agreement with observations of post-flare coronal rain. The presented simulation supports the development and eruption of multiple MFRs, and the formation of coronal rain in post-flare loops, which is one of the key aspects to reveal the coronal heating mystery in the solar atmosphere.
△ Less
Submitted 17 May, 2024;
originally announced May 2024.
-
Mancha3D code: Multi-purpose Advanced Non-ideal MHD Code for High resolution simulations in Astrophysics
Authors:
M. Modestov,
E. Khomenko,
N. Vitas,
A. de Vicente,
A. Navarro,
P. A. Gonzalez-Morales,
M. Collados,
T. Felipe,
D. Martinez-Gomez,
P. Hunana,
M. Luna,
M. Koll Pistarini,
B. Popescu Braileanu,
A. Perdomo Garcia,
V. Liakh,
I. Santamaria,
M. M. Gomez Miguez
Abstract:
The Mancha3D code is a versatile tool for numerical simulations of magnetohydrodynamic processes in solar/stellar atmospheres. The code includes non-ideal physics derived from plasma partial ionization, a realistic equation of state and radiative transfer, which allows performing high quality realistic simulations of magneto-convection, as well as idealized simulations of particular processes, suc…
▽ More
The Mancha3D code is a versatile tool for numerical simulations of magnetohydrodynamic processes in solar/stellar atmospheres. The code includes non-ideal physics derived from plasma partial ionization, a realistic equation of state and radiative transfer, which allows performing high quality realistic simulations of magneto-convection, as well as idealized simulations of particular processes, such as wave propagation, instabilities or energetic events. The paper summarizes the equations and methods used in the Mancha3D code. It also describes its numerical stability and parallel performance and efficiency. The code is based on a finite difference discretization and memory-saving Runge-Kutta (RK) scheme. It handles non-ideal effects through super-time step** and Hall diffusion schemes, and takes into account thermal conduction by solving an additional hyperbolic equation for the heat flux. The code is easily configurable to perform different kinds of simulations. Several examples of the code usage are given. It is demonstrated that splitting variables into equilibrium and perturbation parts is essential for simulations of wave propagation in a static background. A perfectly matched layer (PML) boundary condition built into the code greatly facilitates a non-reflective open boundary implementation. Spatial filtering is an important numerical remedy to eliminate grid-size perturbations enhancing the code stability. Parallel performance analysis reveals that the code is strongly memory bound, which is a natural consequence of the numerical techniques used, such as split variables and PML boundary conditions. Both strong and weak scalings show adequate performance up till several thousands of CPUs.
△ Less
Submitted 7 December, 2023;
originally announced December 2023.
-
Rotational flows in solar coronal flux rope cavities
Authors:
Valeriia Liakh,
Rony Keppens
Abstract:
We present a 2.5-dimensional magnetohydrodynamic simulation of a systematically rotating prominence inside its coronal cavity using the open-source \texttt{MPI-AMRVAC} code. Our simulation starts from a non-adiabatic, gravitationally stratified corona, permeated with a sheared arcade magnetic structure. The flux rope (FR) is formed through converging and shearing footpoints driving, simultaneously…
▽ More
We present a 2.5-dimensional magnetohydrodynamic simulation of a systematically rotating prominence inside its coronal cavity using the open-source \texttt{MPI-AMRVAC} code. Our simulation starts from a non-adiabatic, gravitationally stratified corona, permeated with a sheared arcade magnetic structure. The flux rope (FR) is formed through converging and shearing footpoints driving, simultaneously applying randomized heating at the bottom. The latter induces a left-right asymmetry of temperature and density distributions with respect to the polarity-inversion line. This asymmetry drives flows along the loops before the FR formation, which gets converted to net rotational motions upon reconnection of the field lines. As the thermal instability within the FR develops, angular momentum conservation about its axis leads to a systematic rotation of both hot coronal and cold condensed plasma. The initial rotational velocity exceeds $60\ \mathrm{km\ s^{-1}}$. The synthesized images confirm the simultaneous rotations of the coronal plasma seen in 211 and 193 Å and condensations seen in 304 Å. Furthermore, the formation of the dark cavity is evident in 211 and 193 Å images. Our numerical experiment is inspired by observations of so-called giant solar prominence tornadoes, and reveals that asymmetric FR formation can be crucial in triggering rotational motions. We reproduce observed spinning motions inside the coronal cavity, augmenting our understanding of the complex dynamics of rotating prominences.
△ Less
Submitted 27 July, 2023;
originally announced July 2023.
-
Numerical simulations of prominence oscillations triggered by external perturbations
Authors:
Valeriia Liakh,
Manuel Luna,
Elena Khomenko
Abstract:
Several energetic disturbances have been identified as triggers of the large-amplitude oscillations (LAOs) in prominences. However, the mechanisms for LAOs excitation are not well understood. We aim to study these mechanisms, performing time-dependent numerical simulations in 2.5D and 2D setups using magnetohydrodynamic (MHD) code MANCHA3D. Two types of disturbances are applied to excite prominenc…
▽ More
Several energetic disturbances have been identified as triggers of the large-amplitude oscillations (LAOs) in prominences. However, the mechanisms for LAOs excitation are not well understood. We aim to study these mechanisms, performing time-dependent numerical simulations in 2.5D and 2D setups using magnetohydrodynamic (MHD) code MANCHA3D. Two types of disturbances are applied to excite prominence oscillations, such as a perturbation associated with an eruption and the waves caused by an artificial energy release. In the simulation with the eruption, we obtain that it does not produce LAOs in the prominence located in its vicinity. While the erupting flux rope rises, an elongated current sheet forms behind it, which becomes unstable and breaks into plasmoids. The downward-moving plasmoids cause perturbations in the velocity field by merging with the post-reconnection loops. This velocity perturbation propagates in the surroundings and perturbs the nearby prominence. The analysis of the oscillatory motions of the prominence plasma reveals the excitation of small-amplitude oscillations (SAOs), which are a mixture of longitudinal and vertical oscillations. In the simulation with a distant artificial perturbation, a fast-mode shock wave is produced, and it gradually reaches two flux rope prominences at different distances. This shock wave excites vertical LAOs and longitudinal SAOs with similar amplitudes, periods, and dam** times in both prominences. Finally, in the experiment with the external triggering of LAOs in a dipped arcade prominence model, we find that, although the vector normal to the front of a fast-mode shock wave is parallel to the spine of the dipped arcade well before the contact, this wave does not excite longitudinal LAOs. When the wave front approaches the prominence, it pushes the dense plasma down, establishing vertical LAOs.
△ Less
Submitted 27 March, 2023;
originally announced March 2023.
-
Large-amplitude longitudinal oscillations in solar prominences simulated with different resolutions
Authors:
Valeriia Liakh,
Manuel Luna,
Elena Khomenko
Abstract:
Large-amplitude longitudinal oscillations (LALOs) in solar prominences have been widely studied in the last decades. However, their dam** and amplification mechanisms are not well understood. In this study, we investigate the attenuation and amplification of LALOs using high-resolution numerical simulations with progressively increasing spatial resolutions. We performed time-dependent numerical…
▽ More
Large-amplitude longitudinal oscillations (LALOs) in solar prominences have been widely studied in the last decades. However, their dam** and amplification mechanisms are not well understood. In this study, we investigate the attenuation and amplification of LALOs using high-resolution numerical simulations with progressively increasing spatial resolutions. We performed time-dependent numerical simulations of LALOs using the 2D magnetic configuration that contains a dipped region. After the prominence mass loading in the magnetic dips, we triggered LALOs by perturbing the prominence mass along the magnetic field. We performed the experiments with four values of spatial resolution. In the simulations with the highest resolution, the period shows a good agreement with the pendulum model. The convergence experiment revealed that the dam** time saturates at the bottom prominence region with improving the resolution, indicating the existence of a physical reason for the dam** of oscillations. At the prominence top, the oscillations are amplified during the first minutes and then are slowly attenuated. The characteristic time suggests more significant amplification in the experiments with the highest spatial resolution. The analysis revealed that the energy exchange between the bottom and top prominence regions is responsible for the attenuation and amplification of LALOs. The high-resolution experiments are crucial for the study of the periods and the dam** mechanism of LALOs. The period agrees with the pendulum model only when using high enough spatial resolution. The results suggest that numerical diffusion in simulations with insufficient spatial resolution can hide important physical mechanisms, such as amplification of oscillations.
△ Less
Submitted 2 August, 2021;
originally announced August 2021.
-
Numerical simulations of large-amplitude oscillations in flux-rope solar prominences
Authors:
Valeriia Liakh,
Manuel Luna,
Elena Khomenko
Abstract:
Context. Large-amplitude oscillations (LAOs) of the solar prominences are very spectacular but poorly understood phenomena. These motions have amplitudes larger than $10 {\mathrm{\, km \,s^{-1}}}$ and can be triggered by the external perturbations, e.g., Moreton or EIT waves.
Aims. Our aim is to analyze the properties of large-amplitude oscillations using realistic prominence models and the trig…
▽ More
Context. Large-amplitude oscillations (LAOs) of the solar prominences are very spectacular but poorly understood phenomena. These motions have amplitudes larger than $10 {\mathrm{\, km \,s^{-1}}}$ and can be triggered by the external perturbations, e.g., Moreton or EIT waves.
Aims. Our aim is to analyze the properties of large-amplitude oscillations using realistic prominence models and the triggering mechanism by external disturbances.
Methods. We perform time-dependent numerical simulations of LAOs using a magnetic flux rope model with two values of the shear angle and the density contrast. We study the internal modes of the prominence using the horizontal and vertical triggering. In addition, we use the perturbation that arrives from outside in order to understand how such external disturbance can produce LAOs.
Results. The period of longitudinal oscillations and its behavior with height show good agreement with the pendulum model. The period of transverse oscillations remains constant with height, suggesting a global normal mode. The transverse oscillations typically have shorter periods than the longitudinal oscillations.
Conclusions. The periods of the longitudinal and transverse oscillations show only weak dependence on the shear angle of the magnetic structure and the prominence density contrast. The external disturbance perturbs the flux rope exciting oscillations of both polarizations. Their properties are a mixture of those excited by purely horizontal and vertical driving.
△ Less
Submitted 9 March, 2020;
originally announced March 2020.
