Showing 1–50 of 720 results for author: Lia, J

Probing the connection between IceCube neutrinos and MOJAVE AGN

Authors: R. Abbasi, M. Ackermann, J. Adams, S. K. Agarwalla, J. A. Aguilar, M. Ahlers, J. M. Alameddine, N. M. Amin, K. Andeen, C. Argüelles, Y. Ashida, S. Athanasiadou, L. Ausborm, S. N. Axani, X. Bai, A. Balagopal V., M. Baricevic, S. W. Barwick, S. Bash, V. Basu, R. Bay, J. J. Beatty, J. Becker Tjus, J. Beise, C. Bellenghi , et al. (399 additional authors not shown)

Abstract: Active Galactic Nuclei (AGN) are prime candidate sources of the high-energy, astrophysical neutrinos detected by IceCube. This is demonstrated by the real-time multi-messenger detection of the blazar TXS 0506+056 and the recent evidence of neutrino emission from NGC 1068 from a separate time-averaged study. However, the production mechanism of the astrophysical neutrinos in AGN is not well establi… ▽ More Active Galactic Nuclei (AGN) are prime candidate sources of the high-energy, astrophysical neutrinos detected by IceCube. This is demonstrated by the real-time multi-messenger detection of the blazar TXS 0506+056 and the recent evidence of neutrino emission from NGC 1068 from a separate time-averaged study. However, the production mechanism of the astrophysical neutrinos in AGN is not well established which can be resolved via correlation studies with photon observations. For neutrinos produced due to photohadronic interactions in AGN, in addition to a correlation of neutrinos with high-energy photons, there would also be a correlation of neutrinos with photons emitted at radio wavelengths. In this work, we perform an in-depth stacking study of the correlation between 15 GHz radio observations of AGN reported in the MOJAVE XV catalog, and ten years of neutrino data from IceCube. We also use a time-dependent approach which improves the statistical power of the stacking analysis. No significant correlation was found for both analyses and upper limits are reported. When compared to the IceCube diffuse flux, at 100 TeV and for a spectral index of 2.5, the upper limits derived are $\sim3\%$ and $\sim9\%$ for the time-averaged and time-dependent case, respectively. △ Less

Submitted 1 July, 2024; originally announced July 2024.

Comments: 14 Pages 7 Figures

Search for a light sterile neutrino with 7.5 years of IceCube DeepCore data

Authors: R. Abbasi, M. Ackermann, J. Adams, S. K. Agarwalla, J. A. Aguilar, M. Ahlers, J. M. Alameddine, N. M. Amin, K. Andeen, C. Argüelles, Y. Ashida, S. Athanasiadou, L. Ausborm, S. N. Axani, X. Bai, A. Balagopal V., M. Baricevic, S. W. Barwick, S. Bash, V. Basu, R. Bay, J. J. Beatty, J. Becker Tjus, J. Beise, C. Bellenghi , et al. (399 additional authors not shown)

Abstract: We present a search for an eV-scale sterile neutrino using 7.5 years of data from the IceCube DeepCore detector. The analysis uses a sample of 21,914 events with energies between 5 and 150 GeV to search for sterile neutrinos through atmospheric muon neutrino disappearance. Improvements in event selection and treatment of systematic uncertainties provide greater statistical power compared to previo… ▽ More We present a search for an eV-scale sterile neutrino using 7.5 years of data from the IceCube DeepCore detector. The analysis uses a sample of 21,914 events with energies between 5 and 150 GeV to search for sterile neutrinos through atmospheric muon neutrino disappearance. Improvements in event selection and treatment of systematic uncertainties provide greater statistical power compared to previous DeepCore sterile neutrino searches. Our results are compatible with the absence of mixing between active and sterile neutrino states, and we place constraints on the mixing matrix elements $|U_{μ4}|^2 < 0.0534$ and $|U_{τ4}|^2 < 0.0574$ at 90% CL under the assumption that $Δm^2_{41}\geq 1\;\mathrm{eV^2}$. These null results add to the growing tension between anomalous appearance results and constraints from disappearance searches in the 3+1 sterile neutrino landscape. △ Less

Submitted 1 July, 2024; originally announced July 2024.

Comments: 11 pages, 5 figures. To be submitted to Physical Review D

IVCA: Inter-Relation-Aware Video Complexity Analyzer

Authors: Junqi Liao, Yao Li, Zhuoyuan Li, Li Li, Dong Liu

Abstract: To meet the real-time analysis requirements of video streaming applications, we propose an inter-relation-aware video complexity analyzer (IVCA) as an extension to VCA. The IVCA addresses the limitation of VCA by considering inter-frame relations, namely motion and reference structure. First, we enhance the accuracy of temporal features by introducing feature-domain motion estimation into the IVCA… ▽ More To meet the real-time analysis requirements of video streaming applications, we propose an inter-relation-aware video complexity analyzer (IVCA) as an extension to VCA. The IVCA addresses the limitation of VCA by considering inter-frame relations, namely motion and reference structure. First, we enhance the accuracy of temporal features by introducing feature-domain motion estimation into the IVCA. Next, drawing inspiration from the hierarchical reference structure in codecs, we design layer-aware weights to adjust the majorities of frame complexity in different layers. Additionally, we expand the scope of temporal features by considering frames that be referred to, rather than relying solely on the previous frame. Experimental results show the significant improvement in complexity estimation accuracy achieved by IVCA, with minimal time complexity increase. △ Less

Submitted 28 June, 2024; originally announced July 2024.

Comments: The report for the solution of second prize winner in ICIP 2024 Grand Challenge on Video Complexity (Team: USTC-iVC_Team1, USTC-iVC_Team2)

OutlierTune: Efficient Channel-Wise Quantization for Large Language Models

Authors: **guang Wang, Yuexi Yin, Haifeng Sun, Qi Qi, **gyu Wang, Zirui Zhuang, Tingting Yang, Jianxin Liao

Abstract: Quantizing the activations of large language models (LLMs) has been a significant challenge due to the presence of structured outliers. Most existing methods focus on the per-token or per-tensor quantization of activations, making it difficult to achieve both accuracy and hardware efficiency. To address this problem, we propose OutlierTune, an efficient per-channel post-training quantization (PTQ)… ▽ More Quantizing the activations of large language models (LLMs) has been a significant challenge due to the presence of structured outliers. Most existing methods focus on the per-token or per-tensor quantization of activations, making it difficult to achieve both accuracy and hardware efficiency. To address this problem, we propose OutlierTune, an efficient per-channel post-training quantization (PTQ) method for the activations of LLMs. OutlierTune consists of two components: pre-execution of dequantization and symmetrization. The pre-execution of dequantization updates the model weights by the activation scaling factors, avoiding the internal scaling and costly additional computational overheads brought by the per-channel activation quantization. The symmetrization further reduces the quantization differences arising from the weight updates by ensuring the balanced numerical ranges across different activation channels. OutlierTune is easy to implement and hardware-efficient, introducing almost no additional computational overheads during the inference. Extensive experiments show that the proposed framework outperforms existing methods across multiple different tasks. Demonstrating better generalization, this framework improves the Int6 quantization of the instruction-tuning LLMs, such as OPT-IML, to the same level as half-precision (FP16). Moreover, we have shown that the proposed framework is 1.48x faster than the FP16 implementation while reducing approximately 2x memory usage. △ Less

Submitted 26 June, 2024; originally announced June 2024.

IceCube Search for Neutrino Emission from X-ray Bright Seyfert Galaxies

Authors: R. Abbasi, M. Ackermann, J. Adams, S. K. Agarwalla, J. A. Aguilar, M. Ahlers, J. M. Alameddine, N. M. Amin, K. Andeen, C. Argüelles, Y. Ashida, S. Athanasiadou, L. Ausborm, S. N. Axani, X. Bai, A. Balagopal V., M. Baricevic, S. W. Barwick, S. Bash, V. Basu, R. Bay, J. J. Beatty, J. Becker Tjus, J. Beise, C. Bellenghi , et al. (400 additional authors not shown)

Abstract: The recent IceCube detection of TeV neutrino emission from the nearby active galaxy NGC 1068 suggests that active galactic nuclei (AGN) could make a sizable contribution to the diffuse flux of astrophysical neutrinos. The absence of TeV $γ$-rays from NGC 1068 indicates neutrino production in the vicinity of the supermassive black hole, where the high radiation density leads to $γ$-ray attenuation.… ▽ More The recent IceCube detection of TeV neutrino emission from the nearby active galaxy NGC 1068 suggests that active galactic nuclei (AGN) could make a sizable contribution to the diffuse flux of astrophysical neutrinos. The absence of TeV $γ$-rays from NGC 1068 indicates neutrino production in the vicinity of the supermassive black hole, where the high radiation density leads to $γ$-ray attenuation. Therefore, any potential neutrino emission from similar sources is not expected to correlate with high-energy $γ$-rays. Disk-corona models predict neutrino emission from Seyfert galaxies to correlate with keV X-rays, as they are tracers of coronal activity. Using through-going track events from the Northern Sky recorded by IceCube between 2011 and 2021, we report results from a search for individual and aggregated neutrino signals from 27 additional Seyfert galaxies that are contained in the BAT AGN Spectroscopic Survey (BASS). Besides the generic single power-law, we evaluate the spectra predicted by the disk-corona model. Assuming all sources to be intrinsically similar to NGC 1068, our findings constrain the collective neutrino emission from X-ray bright Seyfert galaxies in the Northern Hemisphere, but, at the same time, show excesses of neutrinos that could be associated with the objects NGC 4151 and CGCG 420-015. These excesses result in a 2.7$σ$ significance with respect to background expectations. △ Less

Submitted 11 June, 2024; originally announced June 2024.

Comments: 17 pages, 9 figures

Search for neutrino emission from hard X-ray AGN with IceCube

Authors: R. Abbasi, M. Ackermann, J. Adams, S. K. Agarwalla, J. A. Aguilar, M. Ahlers, J. M. Alameddine, N. M. Amin, K. Andeen, C. Argüelles, Y. Ashida, S. Athanasiadou, L. Ausborm, S. N. Axani, X. Bai, A. Balagopal V., M. Baricevic, S. W. Barwick, S. Bash, V. Basu, R. Bay, J. J. Beatty, J. Becker Tjus, J. Beise, C. Bellenghi , et al. (401 additional authors not shown)

Abstract: Active Galactic Nuclei (AGN) are promising candidate sources of high-energy astrophysical neutrinos since they provide environments rich in matter and photon targets where cosmic ray interactions may lead to the production of gamma rays and neutrinos. We searched for high-energy neutrino emission from AGN using the $\textit{Swift}$-BAT Spectroscopic Survey (BASS) catalog of hard X-ray sources and… ▽ More Active Galactic Nuclei (AGN) are promising candidate sources of high-energy astrophysical neutrinos since they provide environments rich in matter and photon targets where cosmic ray interactions may lead to the production of gamma rays and neutrinos. We searched for high-energy neutrino emission from AGN using the $\textit{Swift}$-BAT Spectroscopic Survey (BASS) catalog of hard X-ray sources and 12 years of IceCube muon track data. First, upon performing a stacked search, no significant emission was found. Second, we searched for neutrinos from a list of 43 candidate sources and found an excess from the direction of two sources, Seyfert galaxies NGC 1068 and NGC 4151. We observed NGC 1068 at flux $φ_{ν_μ+\barν_μ}$ = $4.02_{-1.52}^{+1.58} \times 10^{-11}$ TeV$^{-1}$ cm$^{-2}$ s$^{-1}$ normalized at 1 TeV, with power-law spectral index, $γ$ = 3.10$^{+0.26}_{-0.22}$, consistent with previous IceCube results. The observation of a neutrino excess from the direction of NGC 4151 is at a post-trial significance of 2.9$σ$. If interpreted as an astrophysical signal, the excess observed from NGC 4151 corresponds to a flux $φ_{ν_μ+\barν_μ}$ = $1.51_{-0.81}^{+0.99} \times 10^{-11}$ TeV$^{-1}$ cm$^{-2}$ s$^{-1}$ normalized at 1 TeV and $γ$ = 2.83$^{+0.35}_{-0.28}$. △ Less

Submitted 12 June, 2024; v1 submitted 10 June, 2024; originally announced June 2024.

Benchmarking Neural Decoding Backbones towards Enhanced On-edge iBCI Applications

Authors: Zhou Zhou, Guohang He, Zheng Zhang, Luziwei Leng, Qinghai Guo, Jianxing Liao, Xuan Song, Ran Cheng

Abstract: Traditional invasive Brain-Computer Interfaces (iBCIs) typically depend on neural decoding processes conducted on workstations within laboratory settings, which prevents their everyday usage. Implementing these decoding processes on edge devices, such as the wearables, introduces considerable challenges related to computational demands, processing speed, and maintaining accuracy. This study seeks… ▽ More Traditional invasive Brain-Computer Interfaces (iBCIs) typically depend on neural decoding processes conducted on workstations within laboratory settings, which prevents their everyday usage. Implementing these decoding processes on edge devices, such as the wearables, introduces considerable challenges related to computational demands, processing speed, and maintaining accuracy. This study seeks to identify an optimal neural decoding backbone that boasts robust performance and swift inference capabilities suitable for edge deployment. We executed a series of neural decoding experiments involving nonhuman primates engaged in random reaching tasks, evaluating four prospective models, Gated Recurrent Unit (GRU), Transformer, Receptance Weighted Key Value (RWKV), and Selective State Space model (Mamba), across several metrics: single-session decoding, multi-session decoding, new session fine-tuning, inference speed, calibration speed, and scalability. The findings indicate that although the GRU model delivers sufficient accuracy, the RWKV and Mamba models are preferable due to their superior inference and calibration speeds. Additionally, RWKV and Mamba comply with the scaling law, demonstrating improved performance with larger data sets and increased model sizes, whereas GRU shows less pronounced scalability, and the Transformer model requires computational resources that scale prohibitively. This paper presents a thorough comparative analysis of the four models in various scenarios. The results are pivotal in pinpointing an optimal backbone that can handle increasing data volumes and is viable for edge implementation. This analysis provides essential insights for ongoing research and practical applications in the field. △ Less

Submitted 7 June, 2024; originally announced June 2024.

Optimal control of linear Gaussian quantum systems via quantum learning control

Authors: Yu-Hong Liu, Yexiong Zeng, Qing-Shou Tan, Daoyi Dong, Franco Nori, Jie-Qiao Liao

Abstract: Efficiently controlling linear Gaussian quantum (LGQ) systems is a significant task in both the study of fundamental quantum theory and the development of modern quantum technology. Here, we propose a general quantum-learning-control method for optimally controlling LGQ systems based on the gradient-descent algorithm. Our approach flexibly designs the loss function for diverse tasks by utilizing f… ▽ More Efficiently controlling linear Gaussian quantum (LGQ) systems is a significant task in both the study of fundamental quantum theory and the development of modern quantum technology. Here, we propose a general quantum-learning-control method for optimally controlling LGQ systems based on the gradient-descent algorithm. Our approach flexibly designs the loss function for diverse tasks by utilizing first- and second-order moments that completely describe the quantum state of LGQ systems. We demonstrate both deep optomechanical cooling and large optomechanical entanglement using this approach. Our approach enables the fast and deep ground-state cooling of a mechanical resonator within a short time, surpassing the limitations of sideband cooling in the continuous-wave driven strong-coupling regime. Furthermore, optomechanical entanglement could be generated remarkably fast and surpass several times the corresponding steady-state entanglement, even when the thermal phonon occupation reaches one hundred. This work will not only broaden the application of quantum learning control, but also open an avenue for optimal control of LGQ systems. △ Less

Submitted 8 June, 2024; originally announced June 2024.

Comments: 14 pages, 7 figures

Journal ref: Phys. Rev. A 109, 063508 (2024)

Spin and lattice dynamics of a van der Waals antiferromagnet MnPSe$_3$

Authors: Junbo Liao, Zhentao Huang, Yanyan Shangguan, Bo Zhang, Shufan Cheng, Hao Xu, Ryoichi Kajimoto, Kazuya Kamazawa, Song Bao, **sheng Wen

Abstract: Antiferromagnetic van der Waals family $\rm \textit{M}P\textit{X}_{3}\ (M=Fe,\ Mn,\ Co,\text{ and}\ Ni; X=S\text{ and}\ Se)$ have attracted significant research attention due to the possibility of realizing long-range magnetic order down to the monolayer limit. Here, we perform inelastic neutron scattering measurements on single crystal samples of MnPSe$_3$, a member of the… ▽ More Antiferromagnetic van der Waals family $\rm \textit{M}P\textit{X}_{3}\ (M=Fe,\ Mn,\ Co,\text{ and}\ Ni; X=S\text{ and}\ Se)$ have attracted significant research attention due to the possibility of realizing long-range magnetic order down to the monolayer limit. Here, we perform inelastic neutron scattering measurements on single crystal samples of MnPSe$_3$, a member of the $\rm \textit{M}P\textit{X}_{3}$ family, to study the spin dynamics and determine the effective spin model. The excited magnon bands are well characterized by a spin model, which includes a Heisenberg term with three intraplane exchange parameters ($J_{1}=-0.73$~meV, $J_{2}=-0.014$~meV, $J_{3}=-0.43$~meV) and one interplane parameter ($J_{c}=-0.054$~meV), and an easy-plane single-ion anisotropy term ($D=-0.035$~meV). Additionally, we observe the intersection of the magnon and phonon bands but no anomalous spectral features induced by the formation of magnon-phonon hybrid excitations at the intersecting region. We discuss possible reasons for the absence of such hybrid excitations in MnPSe$_3$. △ Less

Submitted 7 June, 2024; originally announced June 2024.

Comments: 11 pages, 5 figures

Journal ref: Phys. Rev. B 109, 224411 (2024)

Exploration of mass splitting and muon/tau mixing parameters for an eV-scale sterile neutrino with IceCube

Authors: R. Abbasi, M. Ackermann, J. Adams, S. K. Agarwalla, J. A. Aguilar, M. Ahlers, J. M. Alameddine, N. M. Amin, K. Andeen, C. Argüelles, Y. Ashida, S. Athanasiadou, L. Ausborm, S. N. Axani, X. Bai, A. Balagopal V., M. Baricevic, S. W. Barwick, S. Bash, V. Basu, R. Bay, J. J. Beatty, J. Becker Tjus, J. Beise, C. Bellenghi , et al. (400 additional authors not shown)

Abstract: We present the first three-parameter fit to a 3+1 sterile neutrino model using 7.634 years of data from the IceCube Neutrino Observatory on $ν_μ+\overlineν_μ$ charged-current interactions in the energy range 500-9976 GeV. Our analysis is sensitive to the mass-squared splitting between the heaviest and lightest mass state ($Δm_{41}^2$), the mixing matrix element connecting muon flavor to the fourth… ▽ More We present the first three-parameter fit to a 3+1 sterile neutrino model using 7.634 years of data from the IceCube Neutrino Observatory on $ν_μ+\overlineν_μ$ charged-current interactions in the energy range 500-9976 GeV. Our analysis is sensitive to the mass-squared splitting between the heaviest and lightest mass state ($Δm_{41}^2$), the mixing matrix element connecting muon flavor to the fourth mass state ($|U_{\mu4}|^2$), and the element connecting tau flavor to the fourth mass state ($|U_{\tau4}|^2$). Predicted propagation effects in matter enhance the signature through a resonance as atmospheric neutrinos from the Northern Hemisphere traverse the Earth to the IceCube detector at the South Pole. The result is consistent with the no-sterile neutrino hypothesis with a probability of 4.3 %. Profiling the likelihood of each parameter yields the 90 % confidence levels: $ 2.4\,\mathrm{eV}^{2} < Δm_{41}^2 <9.6\,\mathrm{eV}^{2} $ , $0.0081 < |U_{\mu4}|^2 < 0.10$ , and $|U_{\tau4}|^2< 0.035$, which narrows the allowed parameter-space for $|U_{\tau4}|^2$. However, the primary result of this analysis is the first map of the 3+1 parameter space exploring the interdependence of $Δm_{41}^2$, $|U_{\mu4}|^2$, and $|U_{\tau4}|^2$. △ Less

Submitted 2 June, 2024; originally announced June 2024.

EG4D: Explicit Generation of 4D Object without Score Distillation

Authors: Qi Sun, Zhiyang Guo, Ziyu Wan, **g Nathan Yan, Shengming Yin, Wengang Zhou, **g Liao, Houqiang Li

Abstract: In recent years, the increasing demand for dynamic 3D assets in design and gaming applications has given rise to powerful generative pipelines capable of synthesizing high-quality 4D objects. Previous methods generally rely on score distillation sampling (SDS) algorithm to infer the unseen views and motion of 4D objects, thus leading to unsatisfactory results with defects like over-saturation and… ▽ More In recent years, the increasing demand for dynamic 3D assets in design and gaming applications has given rise to powerful generative pipelines capable of synthesizing high-quality 4D objects. Previous methods generally rely on score distillation sampling (SDS) algorithm to infer the unseen views and motion of 4D objects, thus leading to unsatisfactory results with defects like over-saturation and Janus problem. Therefore, inspired by recent progress of video diffusion models, we propose to optimize a 4D representation by explicitly generating multi-view videos from one input image. However, it is far from trivial to handle practical challenges faced by such a pipeline, including dramatic temporal inconsistency, inter-frame geometry and texture diversity, and semantic defects brought by video generation results. To address these issues, we propose DG4D, a novel multi-stage framework that generates high-quality and consistent 4D assets without score distillation. Specifically, collaborative techniques and solutions are developed, including an attention injection strategy to synthesize temporal-consistent multi-view videos, a robust and efficient dynamic reconstruction method based on Gaussian Splatting, and a refinement stage with diffusion prior for semantic restoration. The qualitative results and user preference study demonstrate that our framework outperforms the baselines in generation quality by a considerable margin. Code will be released at \url{https://github.com/jasongzy/EG4D}. △ Less

Submitted 28 May, 2024; originally announced May 2024.

JUNO Sensitivity to Invisible Decay Modes of Neutrons

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Kai Adamowicz, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, João Pedro Athayde Marcondes de André, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Marco Beretta, Antonio Bergnoli, Daniel Bick , et al. (635 additional authors not shown)

Abstract: We explore the bound neutrons decay into invisible particles (e.g., $n\rightarrow 3 ν$ or $nn \rightarrow 2 ν$) in the JUNO liquid scintillator detector. The invisible decay includes two decay modes: $ n \rightarrow { inv} $ and $ nn \rightarrow { inv} $. The invisible decays of $s$-shell neutrons in $^{12}{\rm C}$ will leave a highly excited residual nucleus. Subsequently, some de-excitation mode… ▽ More We explore the bound neutrons decay into invisible particles (e.g., $n\rightarrow 3 ν$ or $nn \rightarrow 2 ν$) in the JUNO liquid scintillator detector. The invisible decay includes two decay modes: $ n \rightarrow { inv} $ and $ nn \rightarrow { inv} $. The invisible decays of $s$-shell neutrons in $^{12}{\rm C}$ will leave a highly excited residual nucleus. Subsequently, some de-excitation modes of the excited residual nuclei can produce a time- and space-correlated triple coincidence signal in the JUNO detector. Based on a full Monte Carlo simulation informed with the latest available data, we estimate all backgrounds, including inverse beta decay events of the reactor antineutrino $\barν_e$, natural radioactivity, cosmogenic isotopes and neutral current interactions of atmospheric neutrinos. Pulse shape discrimination and multivariate analysis techniques are employed to further suppress backgrounds. With two years of exposure, JUNO is expected to give an order of magnitude improvement compared to the current best limits. After 10 years of data taking, the JUNO expected sensitivities at a 90% confidence level are $τ/B( n \rightarrow { inv} ) > 5.0 \times 10^{31} \, {\rm yr}$ and $τ/B( nn \rightarrow { inv} ) > 1.4 \times 10^{32} \, {\rm yr}$. △ Less

Submitted 27 May, 2024; originally announced May 2024.

Comments: 28 pages, 7 figures, 4 tables

RealityEffects: Augmenting 3D Volumetric Videos with Object-Centric Annotation and Dynamic Visual Effects

Authors: Jian Liao, Kevin Van, Zhijie Xia, Ryo Suzuki

Abstract: This paper introduces RealityEffects, a desktop authoring interface designed for editing and augmenting 3D volumetric videos with object-centric annotations and visual effects. RealityEffects enhances volumetric capture by introducing a novel method for augmenting captured physical motion with embedded, responsive visual effects, referred to as object-centric augmentation. In RealityEffects, users… ▽ More This paper introduces RealityEffects, a desktop authoring interface designed for editing and augmenting 3D volumetric videos with object-centric annotations and visual effects. RealityEffects enhances volumetric capture by introducing a novel method for augmenting captured physical motion with embedded, responsive visual effects, referred to as object-centric augmentation. In RealityEffects, users can interactively attach various visual effects to physical objects within the captured 3D scene, enabling these effects to dynamically move and animate in sync with the corresponding physical motion and body movements. The primary contribution of this paper is the development of a taxonomy for such object-centric augmentations, which includes annotated labels, highlighted objects, ghost effects, and trajectory visualization. This taxonomy is informed by an analysis of 120 edited videos featuring object-centric visual effects. The findings from our user study confirm that our direct manipulation techniques lower the barriers to editing and annotating volumetric captures, thereby enhancing interactive and engaging viewing experiences of 3D volumetric videos. △ Less

Submitted 27 May, 2024; originally announced May 2024.

Comments: DIS 2024

PPRSteg: Printing and Photography Robust QR Code Steganography via Attention Flow-Based Model

Authors: Huayuan Ye, Shenzhuo Zhang, Shiqi Jiang, **g Liao, Shuhang Gu, Changbo Wang, Chenhui Li

Abstract: Image steganography can hide information in a host image and obtain a stego image that is perceptually indistinguishable from the original one. This technique has tremendous potential in scenarios like copyright protection, information retrospection, etc. Some previous studies have proposed to enhance the robustness of the methods against image disturbances to increase their applicability. However… ▽ More Image steganography can hide information in a host image and obtain a stego image that is perceptually indistinguishable from the original one. This technique has tremendous potential in scenarios like copyright protection, information retrospection, etc. Some previous studies have proposed to enhance the robustness of the methods against image disturbances to increase their applicability. However, they generally cannot achieve a satisfying balance between the steganography quality and robustness. In this paper, we focus on the issue of QR Code steganography that is robust to real-world printing and photography. Different from common image steganography, QR Code steganography aims to embed a non-natural image into a natural image and the restored QR Code is required to be recognizable, which increases the difficulty of data concealing and revealing. Inspired by the recent developments in transformer-based vision models, we discover that the tokenized representation of images is naturally suitable for steganography. In this paper, we propose a novel QR Code embedding framework, called Printing and Photography Robust Steganography (PPRSteg), which is competent to hide QR Code in a host image with unperceivable changes and can restore it even if the stego image is printed out and photoed. We outline a transition process to reduce the artifacts in stego images brought by QR Codes. We also propose a steganography model based on normalizing flow, which combines the attention mechanism to enhance its performance. To our best knowledge, this is the first work that integrates the advantages of transformer models into normalizing flow. We conduct comprehensive and detailed experiments to demonstrate the effectiveness of our method and the result shows that PPRSteg has great potential in robust, secure and high-quality QR Code steganography. △ Less

Submitted 25 May, 2024; originally announced May 2024.

Comments: 9 content pages

Unveiling the Impact of Sulfur Do** on Copper-Substituted Lead Apatite: A Theoretical Study

Authors: Ming-Long Wang, Yin-Hui Peng, Ji-Hai Liao, Xiao-Bao Yang, Yao Yao, Yu-Jun Zhao

Abstract: Room-temperature superconductivity represents a significant scientific milestone, with the initial report of LK-99, a copper-substituted lead apatite $\mathrm{Pb}_{10-x}\mathrm{Cu}_{x}(\mathrm{PO}_{4})_{6}\mathrm{O}$, offering a potential breakthrough. However, other researchers have encountered numerous challenges in replicating the original experimental results. In recent studies, Wang et al. su… ▽ More Room-temperature superconductivity represents a significant scientific milestone, with the initial report of LK-99, a copper-substituted lead apatite $\mathrm{Pb}_{10-x}\mathrm{Cu}_{x}(\mathrm{PO}_{4})_{6}\mathrm{O}$, offering a potential breakthrough. However, other researchers have encountered numerous challenges in replicating the original experimental results. In recent studies, Wang et al. successfully observed signs of a possible superconducting phase, such as smaller resistance and stronger diamagnetism, upon do** S into the samples. This indicates that the introduction of S is of significant importance for achieving an appropriate structure. To further investigate the role of S, we have considered the $\mathrm{Pb}_{10-x}\mathrm{Cu}_{x}(\mathrm{PO}_{4})_{6}\mathrm{S}$, systematically discussing its thermodynamic stability, as well as the influence of S on the distribution, concentration, and electronic properties of Cu. We find that $\mathrm{Pb}_{10-x}\mathrm{Cu}_{x}(\mathrm{PO}_{4})_{6}\mathrm{S}$ maintains thermodynamic stability, with S primarily influencing the distribution of Cu. The critical element dictating the electronic characteristics of the material post-synthesis is Cu, while the impact of S on the electronic properties is relatively minor. Our work provides valuable insights into the synthesis of potential apatite based room-temperature superconductors and the role of S in facilitating Cu do**. △ Less

Submitted 20 May, 2024; originally announced May 2024.

Comments: 8 pages, 4 figures

Text-to-Vector Generation with Neural Path Representation

Authors: Peiying Zhang, Nanxuan Zhao, **g Liao

Abstract: Vector graphics are widely used in digital art and highly favored by designers due to their scalability and layer-wise properties. However, the process of creating and editing vector graphics requires creativity and design expertise, making it a time-consuming task. Recent advancements in text-to-vector (T2V) generation have aimed to make this process more accessible. However, existing T2V methods… ▽ More Vector graphics are widely used in digital art and highly favored by designers due to their scalability and layer-wise properties. However, the process of creating and editing vector graphics requires creativity and design expertise, making it a time-consuming task. Recent advancements in text-to-vector (T2V) generation have aimed to make this process more accessible. However, existing T2V methods directly optimize control points of vector graphics paths, often resulting in intersecting or jagged paths due to the lack of geometry constraints. To overcome these limitations, we propose a novel neural path representation by designing a dual-branch Variational Autoencoder (VAE) that learns the path latent space from both sequence and image modalities. By optimizing the combination of neural paths, we can incorporate geometric constraints while preserving expressivity in generated SVGs. Furthermore, we introduce a two-stage path optimization method to improve the visual and topological quality of generated SVGs. In the first stage, a pre-trained text-to-image diffusion model guides the initial generation of complex vector graphics through the Variational Score Distillation (VSD) process. In the second stage, we refine the graphics using a layer-wise image vectorization strategy to achieve clearer elements and structure. We demonstrate the effectiveness of our method through extensive experiments and showcase various applications. The project page is https://intchous.github.io/T2V-NPR. △ Less

Submitted 20 May, 2024; v1 submitted 16 May, 2024; originally announced May 2024.

Comments: Accepted by SIGGRAPH 2024. Project page: https://intchous.github.io/T2V-NPR

Analogist: Out-of-the-box Visual In-Context Learning with Image Diffusion Model

Authors: Zheng Gu, Shiyuan Yang, **g Liao, **g Huo, Yang Gao

Abstract: Visual In-Context Learning (ICL) has emerged as a promising research area due to its capability to accomplish various tasks with limited example pairs through analogical reasoning. However, training-based visual ICL has limitations in its ability to generalize to unseen tasks and requires the collection of a diverse task dataset. On the other hand, existing methods in the inference-based visual IC… ▽ More Visual In-Context Learning (ICL) has emerged as a promising research area due to its capability to accomplish various tasks with limited example pairs through analogical reasoning. However, training-based visual ICL has limitations in its ability to generalize to unseen tasks and requires the collection of a diverse task dataset. On the other hand, existing methods in the inference-based visual ICL category solely rely on textual prompts, which fail to capture fine-grained contextual information from given examples and can be time-consuming when converting from images to text prompts. To address these challenges, we propose Analogist, a novel inference-based visual ICL approach that exploits both visual and textual prompting techniques using a text-to-image diffusion model pretrained for image inpainting. For visual prompting, we propose a self-attention cloning (SAC) method to guide the fine-grained structural-level analogy between image examples. For textual prompting, we leverage GPT-4V's visual reasoning capability to efficiently generate text prompts and introduce a cross-attention masking (CAM) operation to enhance the accuracy of semantic-level analogy guided by text prompts. Our method is out-of-the-box and does not require fine-tuning or optimization. It is also generic and flexible, enabling a wide range of visual tasks to be performed in an in-context manner. Extensive experiments demonstrate the superiority of our method over existing approaches, both qualitatively and quantitatively. △ Less

Submitted 16 May, 2024; originally announced May 2024.

Comments: Project page: https://analogist2d.github.io

Methods and stability tests associated with the sterile neutrino search using improved high-energy $ν_μ$ event reconstruction in IceCube

Authors: IceCube Collaboration, R. Abbasi, M. Ackermann, J. Adams, S. K. Agarwalla, J. A. Aguilar, M. Ahlers, J. M. Alameddine, N. M. Amin, K. Andeen, C. Argüelles, Y. Ashida, S. Athanasiadou, L. Ausborm, S. N. Axani, X. Bai, A. Balagopal V., M. Baricevic, S. W. Barwick, S. Bash, V. Basu, R. Bay, J. J. Beatty, J. Becker Tjus, J. Beise , et al. (398 additional authors not shown)

Abstract: We provide supporting details for the search for a 3+1 sterile neutrino using data collected over eleven years at the IceCube Neutrino Observatory. The analysis uses atmospheric muon-flavored neutrinos from 0.5 to 100\, TeV that traverse the Earth to reach the IceCube detector, and finds a best-fit point at $\sin^2(2θ_{24}) = 0.16$ and $Δm^{2}_{41} = 3.5$ eV$^2$ with a goodness-of-fit p-value of 1… ▽ More We provide supporting details for the search for a 3+1 sterile neutrino using data collected over eleven years at the IceCube Neutrino Observatory. The analysis uses atmospheric muon-flavored neutrinos from 0.5 to 100\, TeV that traverse the Earth to reach the IceCube detector, and finds a best-fit point at $\sin^2(2θ_{24}) = 0.16$ and $Δm^{2}_{41} = 3.5$ eV$^2$ with a goodness-of-fit p-value of 12\% and consistency with the null hypothesis of no oscillations to sterile neutrinos with a p-value of 3.1\%. Several improvements were made over past analyses, which are reviewed in this article, including upgrades to the reconstruction and the study of sources of systematic uncertainty. We provide details of the fit quality and discuss stability tests that split the data for separate samples, comparing results. We find that the fits are consistent between split data sets. △ Less

Submitted 13 May, 2024; originally announced May 2024.

Comments: 18 pages, 17 figures, 2 tables. This long-form paper is a companion to the letter "A search for an eV-scale sterile neutrino using improved high-energy νμ event reconstruction in IceCube."

A search for an eV-scale sterile neutrino using improved high-energy $ν_μ$ event reconstruction in IceCube

Authors: IceCube Collaboration, R. Abbasi, M. Ackermann, J. Adams, S. K. Agarwalla, J. A. Aguilar, M. Ahlers, J. M. Alameddine, N. M. Amin, K. Andeen, C. Argüelles, Y. Ashida, S. Athanasiadou, L. Ausborm, S. N. Axani, X. Bai, A. Balagopal V., M. Baricevic, S. W. Barwick, S. Bash, V. Basu, R. Bay, J. J. Beatty, J. Becker Tjus, J. Beise , et al. (398 additional authors not shown)

Abstract: This Letter presents the result of a 3+1 sterile neutrino search using 10.7 years of IceCube data. We analyze atmospheric muon neutrinos that traverse the Earth with energies ranging from 0.5 to 100 TeV, incorporating significant improvements in modeling neutrino flux and detector response compared to earlier studies. Notably, for the first time, we categorize data into starting and through-going… ▽ More This Letter presents the result of a 3+1 sterile neutrino search using 10.7 years of IceCube data. We analyze atmospheric muon neutrinos that traverse the Earth with energies ranging from 0.5 to 100 TeV, incorporating significant improvements in modeling neutrino flux and detector response compared to earlier studies. Notably, for the first time, we categorize data into starting and through-going events, distinguishing neutrino interactions with vertices inside or outside the instrumented volume, to improve energy resolution. The best-fit point for a 3+1 model is found to be at $\sin^2(2θ_{24}) = 0.16$ and $Δm^{2}_{41} = 3.5$ eV$^2$, which agrees with previous iterations of this study. The result is consistent with the null hypothesis of no sterile neutrinos with a p-value of 3.1\%. △ Less

Submitted 13 May, 2024; originally announced May 2024.

Comments: 9 pages, 3 figures. This letter is supported by the long-form paper "Methods and stability tests associated with the sterile neutrino search using improved high-energy $ν_μ$ event reconstruction in IceCube," also appearing on arXiv

A Potential Model Study of the Nucleon's Charge and Mass Radius

Authors: Daniel Gallimore, **feng Liao

Abstract: We study the charge and mass distributions within a nucleon and compute the associated squared radii based on a potential model approach. Different constituent quark configurations such as $Δ$, $Y$, and quark-diquark are considered and compared, with model parameters calibrated by experimental measurements of the proton and neutron charge radius. The results suggest that while the charge radius is… ▽ More We study the charge and mass distributions within a nucleon and compute the associated squared radii based on a potential model approach. Different constituent quark configurations such as $Δ$, $Y$, and quark-diquark are considered and compared, with model parameters calibrated by experimental measurements of the proton and neutron charge radius. The results suggest that while the charge radius is dictated by quark dynamics, the mass radius is strongly influenced by nonperturbative QCD contributions to a nucleon's mass that are not sensitive to the constituent quarks. As a result, the mass radius could become substantially different from the charge radius. The obtained nucleon mass distributions of different configurations are further used for simulations of the initial conditions in heavy ion collisions. The computed eccentricities $\varepsilon_2$ and $\varepsilon_3$ are found to demonstrate a considerable sensitivity to the input nucleon profiles, especially to the mass radius in the peripheral region as well as for systems with fewer participants. △ Less

Submitted 11 May, 2024; originally announced May 2024.

Comments: 20 pages, 16 figures

Manipulating Topological Polaritons in Optomechanical Ladders

Authors: Jia-Kang Wu, Xun-Wei Xu, Hui **g, Le-Man Kuang, Franco Nori, Jie-Qiao Liao

Abstract: We propose to manipulate topological polaritons in optomechanical ladders consisting of an optical Su-Schrieffer-Heeger (SSH) chain and a mechanical SSH chain connected through optomechanical (interchain) interactions. We show that the topological phase diagrams are divided into six areas by four boundaries and that there are four topological phases characterized by the Berry phases. We find that… ▽ More We propose to manipulate topological polaritons in optomechanical ladders consisting of an optical Su-Schrieffer-Heeger (SSH) chain and a mechanical SSH chain connected through optomechanical (interchain) interactions. We show that the topological phase diagrams are divided into six areas by four boundaries and that there are four topological phases characterized by the Berry phases. We find that a topologically nontrivial phase of the polaritons is generated by the optomechanical interaction between the optical and mechanical SSH chains even though they are both in the topologically trivial phases. Counter-intuitively, six edge states appear in one of the topological phases with only two topological nontrivial bands, and some edge states are localized near but not at the boundaries of an open-boundary ladder. Moreover, a two-dimensional Chern insulator with higher Chern numbers is simulated by introducing proper periodical adiabatic modulations of the driving amplitude and frequency. Our work not only opens a route towards topological polaritons manipulation by optomachanical interactions, but also will exert a far-reaching influence on designing topologically protected polaritonic devices. △ Less

Submitted 9 May, 2024; originally announced May 2024.

Comments: 8+15 pages, 3+7 figures

Chiral Magnetic Effect in Heavy Ion Collisions: The Present and Future

Authors: Dmitri E. Kharzeev, **feng Liao, Prithwish Tribedy

Abstract: The chiral magnetic effect (CME) is a collective quantum phenomenon that arises from the interplay between gauge field topology and fermion chiral anomaly, encompassing a wide range of physical systems from semimetals to quark-gluon plasma. This review, with a focus on CME and related effects in heavy ion collisions, aims to provide an introductory discussion on its conceptual foundation and measu… ▽ More The chiral magnetic effect (CME) is a collective quantum phenomenon that arises from the interplay between gauge field topology and fermion chiral anomaly, encompassing a wide range of physical systems from semimetals to quark-gluon plasma. This review, with a focus on CME and related effects in heavy ion collisions, aims to provide an introductory discussion on its conceptual foundation and measurement methodology, a timely update on the present status in terms of experimental findings and theoretical progress, as well as an outlook into the open problems and future developments. △ Less

Submitted 3 July, 2024; v1 submitted 8 May, 2024; originally announced May 2024.

Comments: 136 pages, 39 figures, book chapter to be included in the Quark-Gluon Plasma 6 edited by Xin-Nian Wang

Physics-data hybrid dynamic model of a multi-axis manipulator for sensorless dexterous manipulation and high-performance motion planning

Authors: Wu-Te Yang, Jyun-Ming Liao, Pei-Chun Lin

Abstract: We report on the development of an implementable physics-data hybrid dynamic model for an articulated manipulator to plan and operate in various scenarios. Meanwhile, the physics-based and data-driven dynamic models are studied in this research to select the best model for planning. The physics-based model is constructed using the Lagrangian method, and the loss terms include inertia loss, viscous… ▽ More We report on the development of an implementable physics-data hybrid dynamic model for an articulated manipulator to plan and operate in various scenarios. Meanwhile, the physics-based and data-driven dynamic models are studied in this research to select the best model for planning. The physics-based model is constructed using the Lagrangian method, and the loss terms include inertia loss, viscous loss, and friction loss. As for the data-driven model, three methods are explored, including DNN, LSTM, and XGBoost. Our modeling results demonstrate that, after comprehensive hyperparameter optimization, the XGBoost architecture outperforms DNN and LSTM in accurately representing manipulator dynamics. The hybrid model with physics-based and data-driven terms has the best performance among all models based on the RMSE criteria, and it only needs about 24k of training data. In addition, we developed a virtual force sensor of a manipulator using the observed external torque derived from the dynamic model and designed a motion planner through the physics-data hybrid dynamic model. The external torque contributes to forces and torque on the end effector, facilitating interaction with the surroundings, while the internal torque governs manipulator motion dynamics and compensates for internal losses. By estimating external torque via the difference between measured joint torque and internal losses, we implement a sensorless control strategy which is demonstrated through a peg-in-hole task. Lastly, a learning-based motion planner based on the hybrid dynamic model assists in planning time-efficient trajectories for the manipulator. This comprehensive approach underscores the efficacy of integrating physics-based and data-driven models for advanced manipulator control and planning in industrial environments. △ Less

Submitted 7 May, 2024; originally announced May 2024.

Comments: 26 pages, 16 figures

Search for joint multimessenger signals from potential Galactic PeVatrons with HAWC and IceCube

Authors: R. Alfaro, C. Alvarez, J. C. Arteaga-Velázquez, D. Avila Rojas, H. A. Ayala Solares, R. Babu, E. Belmont-Moreno, K. S. Caballero-Mora, T. Capistrán, A. Carramiñana, S. Casanova, U. Cotti, J. Cotzomi, S. Coutiño de León, E. De la Fuente, D. Depaoli, N. Di Lalla, R. Diaz Hernandez, J. C. Díaz-Vélez, K. Engel, T. Ergin, K. L. Fan, K. Fang, N. Fraija, S. Fraija , et al. (469 additional authors not shown)

Abstract: Galactic PeVatrons are sources that can accelerate cosmic rays to PeV energies. The high-energy cosmic rays are expected to interact with the surrounding ambient material or radiation, resulting in the production of gamma rays and neutrinos. To optimize for the detection of such associated production of gamma rays and neutrinos for a given source morphology and spectrum, a multi-messenger analysis… ▽ More Galactic PeVatrons are sources that can accelerate cosmic rays to PeV energies. The high-energy cosmic rays are expected to interact with the surrounding ambient material or radiation, resulting in the production of gamma rays and neutrinos. To optimize for the detection of such associated production of gamma rays and neutrinos for a given source morphology and spectrum, a multi-messenger analysis that combines gamma rays and neutrinos is required. In this study, we use the Multi-Mission Maximum Likelihood framework (3ML) with IceCube Maximum Likelihood Analysis software (i3mla) and HAWC Accelerated Likelihood (HAL) to search for a correlation between 22 known gamma-ray sources from the third HAWC gamma-ray catalog and 14 years of IceCube track-like data. No significant neutrino emission from the direction of the HAWC sources was found. We report the best-fit gamma-ray model and 90% CL neutrino flux limit from the 22 sources. From the neutrino flux limit, we conclude that the gamma-ray emission from five of the sources can not be produced purely from hadronic interactions. We report the limit for the fraction of gamma rays produced by hadronic interactions for these five sources. △ Less

Submitted 6 May, 2024; originally announced May 2024.

A Spiking Neural Network Decoder for Implantable Brain Machine Interfaces and its Sparsity-aware Deployment on RISC-V Microcontrollers

Authors: Jiawei Liao, Oscar Toomey, Xiaying Wang, Lars Widmer, Cynthia A. Chestek, Luca Benini, Taekwang Jang

Abstract: Implantable Brain-machine interfaces (BMIs) are promising for motor rehabilitation and mobility augmentation, and they demand accurate and energy-efficient algorithms. In this paper, we propose a novel spiking neural network (SNN) decoder for regression tasks for implantable BMIs. The SNN is trained with enhanced spatio-temporal backpropagation to fully leverage its capability to handle temporal p… ▽ More Implantable Brain-machine interfaces (BMIs) are promising for motor rehabilitation and mobility augmentation, and they demand accurate and energy-efficient algorithms. In this paper, we propose a novel spiking neural network (SNN) decoder for regression tasks for implantable BMIs. The SNN is trained with enhanced spatio-temporal backpropagation to fully leverage its capability to handle temporal problems. The proposed SNN decoder outperforms the state-of-the-art Kalman filter and artificial neural network (ANN) decoders in offline finger velocity decoding tasks. The decoder is deployed on a RISC-V-based hardware platform and optimized to exploit sparsity. The proposed implementation has an average power consumption of 0.50 mW in a duty-cycled mode. When conducting continuous inference without duty-cycling, it achieves an energy efficiency of 1.88 uJ per inference, which is 5.5X less than the baseline ANN. Additionally, the average decoding latency is 0.12 ms for each inference, which is 5.7X faster than the ANN implementation. △ Less

Submitted 3 May, 2024; originally announced May 2024.

GAD-Generative Learning for HD Map-Free Autonomous Driving

Authors: Weijian Sun, Yanbo Jia, Qi Zeng, Zihao Liu, Jiang Liao, Yue Li, Xianfeng Li

Abstract: Deep-learning-based techniques have been widely adopted for autonomous driving software stacks for mass production in recent years, focusing primarily on perception modules, with some work extending this method to prediction modules. However, the downstream planning and control modules are still designed with hefty handcrafted rules, dominated by optimization-based methods such as quadratic progra… ▽ More Deep-learning-based techniques have been widely adopted for autonomous driving software stacks for mass production in recent years, focusing primarily on perception modules, with some work extending this method to prediction modules. However, the downstream planning and control modules are still designed with hefty handcrafted rules, dominated by optimization-based methods such as quadratic programming or model predictive control. This results in a performance bottleneck for autonomous driving systems in that corner cases simply cannot be solved by enumerating hand-crafted rules. We present a deep-learning-based approach that brings prediction, decision, and planning modules together with the attempt to overcome the rule-based methods' deficiency in real-world applications of autonomous driving, especially for urban scenes. The DNN model we proposed is solely trained with 10 hours of human driver data, and it supports all mass-production ADAS features available on the market to date. This method is deployed onto a Jiyue test car with no modification to its factory-ready sensor set and compute platform. the feasibility, usability, and commercial potential are demonstrated in this article. △ Less

Submitted 31 May, 2024; v1 submitted 1 May, 2024; originally announced May 2024.

SemVecNet: Generalizable Vector Map Generation for Arbitrary Sensor Configurations

Authors: Narayanan Elavathur Ranganatha, Hengyuan Zhang, Shashank Venkatramani, **g-Yan Liao, Henrik I. Christensen

Abstract: Vector maps are essential in autonomous driving for tasks like localization and planning, yet their creation and maintenance are notably costly. While recent advances in online vector map generation for autonomous vehicles are promising, current models lack adaptability to different sensor configurations. They tend to overfit to specific sensor poses, leading to decreased performance and higher re… ▽ More Vector maps are essential in autonomous driving for tasks like localization and planning, yet their creation and maintenance are notably costly. While recent advances in online vector map generation for autonomous vehicles are promising, current models lack adaptability to different sensor configurations. They tend to overfit to specific sensor poses, leading to decreased performance and higher retraining costs. This limitation hampers their practical use in real-world applications. In response to this challenge, we propose a modular pipeline for vector map generation with improved generalization to sensor configurations. The pipeline leverages probabilistic semantic map** to generate a bird's-eye-view (BEV) semantic map as an intermediate representation. This intermediate representation is then converted to a vector map using the MapTRv2 decoder. By adopting a BEV semantic map robust to different sensor configurations, our proposed approach significantly improves the generalization performance. We evaluate the model on datasets with sensor configurations not used during training. Our evaluation sets includes larger public datasets, and smaller scale private data collected on our platform. Our model generalizes significantly better than the state-of-the-art methods. △ Less

Submitted 30 April, 2024; originally announced May 2024.

Comments: 8 pages, 6 figures, Accepted to IV 2024

Acceptance Tests of more than 10 000 Photomultiplier Tubes for the multi-PMT Digital Optical Modules of the IceCube Upgrade

Authors: R. Abbasi, M. Ackermann, J. Adams, S. K. Agarwalla, J. A. Aguilar, M. Ahlers, J. M. Alameddine, N. M. Amin, K. Andeen, C. Argüelles, Y. Ashida, S. Athanasiadou, L. Ausborm, S. N. Axani, X. Bai, A. Balagopal V., M. Baricevic, S. W. Barwick, S. Bash, V. Basu, R. Bay, J. J. Beatty, J. Becker Tjus, J. Beise, C. Bellenghi , et al. (399 additional authors not shown)

Abstract: More than 10,000 photomultiplier tubes (PMTs) with a diameter of 80 mm will be installed in multi-PMT Digital Optical Modules (mDOMs) of the IceCube Upgrade. These have been tested and pre-calibrated at two sites. A throughput of more than 1000 PMTs per week with both sites was achieved with a modular design of the testing facilities and highly automated testing procedures. The testing facilities… ▽ More More than 10,000 photomultiplier tubes (PMTs) with a diameter of 80 mm will be installed in multi-PMT Digital Optical Modules (mDOMs) of the IceCube Upgrade. These have been tested and pre-calibrated at two sites. A throughput of more than 1000 PMTs per week with both sites was achieved with a modular design of the testing facilities and highly automated testing procedures. The testing facilities can easily be adapted to other PMTs, such that they can, e.g., be re-used for testing the PMTs for IceCube-Gen2. Single photoelectron response, high voltage dependence, time resolution, prepulse, late pulse, afterpulse probabilities, and dark rates were measured for each PMT. We describe the design of the testing facilities, the testing procedures, and the results of the acceptance tests. △ Less

Submitted 20 June, 2024; v1 submitted 30 April, 2024; originally announced April 2024.

Comments: 24 pages, 19 figures, 2 tables, submitted to JINST

Garbage Segmentation and Attribute Analysis by Robotic Dogs

Authors: Nuo Xu, Jianfeng Liao, Qiwei Meng, Wei Song

Abstract: Efficient waste management and recycling heavily rely on garbage exploration and identification. In this study, we propose GSA2Seg (Garbage Segmentation and Attribute Analysis), a novel visual approach that utilizes quadruped robotic dogs as autonomous agents to address waste management and recycling challenges in diverse indoor and outdoor environments. Equipped with advanced visual perception sy… ▽ More Efficient waste management and recycling heavily rely on garbage exploration and identification. In this study, we propose GSA2Seg (Garbage Segmentation and Attribute Analysis), a novel visual approach that utilizes quadruped robotic dogs as autonomous agents to address waste management and recycling challenges in diverse indoor and outdoor environments. Equipped with advanced visual perception system, including visual sensors and instance segmentators, the robotic dogs adeptly navigate their surroundings, diligently searching for common garbage items. Inspired by open-vocabulary algorithms, we introduce an innovative method for object attribute analysis. By combining garbage segmentation and attribute analysis techniques, the robotic dogs accurately determine the state of the trash, including its position and placement properties. This information enhances the robotic arm's gras** capabilities, facilitating successful garbage retrieval. Additionally, we contribute an image dataset, named GSA2D, to support evaluation. Through extensive experiments on GSA2D, this paper provides a comprehensive analysis of GSA2Seg's effectiveness. Dataset available: \href{https://www.kaggle.com/datasets/hellob/gsa2d-2024}{https://www.kaggle.com/datasets/hellob/gsa2d-2024}. △ Less

Submitted 28 April, 2024; originally announced April 2024.

Classifier-guided neural blind deconvolution: a physics-informed denoising module for bearing fault diagnosis under heavy noise

Authors: **g-Xiao Liao, Chao He, Jipu Li, **wei Sun, Shi** Zhang, Xiaoge Zhang

Abstract: Blind deconvolution (BD) has been demonstrated as an efficacious approach for extracting bearing fault-specific features from vibration signals under strong background noise. Despite BD's desirable feature in adaptability and mathematical interpretability, a significant challenge persists: How to effectively integrate BD with fault-diagnosing classifiers? This issue arises because the traditional… ▽ More Blind deconvolution (BD) has been demonstrated as an efficacious approach for extracting bearing fault-specific features from vibration signals under strong background noise. Despite BD's desirable feature in adaptability and mathematical interpretability, a significant challenge persists: How to effectively integrate BD with fault-diagnosing classifiers? This issue arises because the traditional BD method is solely designed for feature extraction with its own optimizer and objective function. When BD is combined with downstream deep learning classifiers, the different learning objectives will be in conflict. To address this problem, this paper introduces classifier-guided BD (ClassBD) for joint learning of BD-based feature extraction and deep learning-based fault classification. Firstly, we present a time and frequency neural BD that employs neural networks to implement conventional BD, thereby facilitating the seamless integration of BD and the deep learning classifier for co-optimization of model parameters. Subsequently, we develop a unified framework to use a deep learning classifier to guide the learning of BD filters. In addition, we devise a physics-informed loss function composed of kurtosis, $l_2/l_4$ norm, and a cross-entropy loss to jointly optimize the BD filters and deep learning classifier. Consequently, the fault labels provide useful information to direct BD to extract features that distinguish classes amidst strong noise. To the best of our knowledge, this is the first of its kind that BD is successfully applied to bearing fault diagnosis. Experimental results from three datasets demonstrate that ClassBD outperforms other state-of-the-art methods under noisy conditions. △ Less

Submitted 10 April, 2024; originally announced April 2024.

Rethinking Legal Compliance Automation: Opportunities with Large Language Models

Authors: Shabnam Hassani, Mehrdad Sabetzadeh, Daniel Amyot, Jain Liao

Abstract: As software-intensive systems face growing pressure to comply with laws and regulations, providing automated support for compliance analysis has become paramount. Despite advances in the Requirements Engineering (RE) community on legal compliance analysis, important obstacles remain in develo** accurate and generalizable compliance automation solutions. This paper highlights some observed limita… ▽ More As software-intensive systems face growing pressure to comply with laws and regulations, providing automated support for compliance analysis has become paramount. Despite advances in the Requirements Engineering (RE) community on legal compliance analysis, important obstacles remain in develo** accurate and generalizable compliance automation solutions. This paper highlights some observed limitations of current approaches and examines how adopting new automation strategies that leverage Large Language Models (LLMs) can help address these shortcomings and open up fresh opportunities. Specifically, we argue that the examination of (textual) legal artifacts should, first, employ a broader context than sentences, which have widely been used as the units of analysis in past research. Second, the mode of analysis with legal artifacts needs to shift from classification and information extraction to more end-to-end strategies that are not only accurate but also capable of providing explanation and justification. We present a compliance analysis approach designed to address these limitations. We further outline our evaluation plan for the approach and provide preliminary evaluation results based on data processing agreements (DPAs) that must comply with the General Data Protection Regulation (GDPR). Our initial findings suggest that our approach yields substantial accuracy improvements and, at the same time, provides justification for compliance decisions. △ Less

Submitted 22 April, 2024; originally announced April 2024.

Comments: Accepted for publication at the RE@Next! track of RE 2024

Optimized mechanical quadrature squeezing beyond the 3 dB limit via gradient-descent algorithm

Authors: Yu-Hong Liu, Jie-Qiao Liao

Abstract: The preparation of mechanical quadrature-squeezed states holds significant importance in cavity optomechanics because the squeezed states have extensive applications in understanding fundamental quantum mechanics and exploiting modern quantum technonogy. Here, we propose a reliable scheme for generating mechanical quadrature squeezing in a typical cavity optomechanical system via seeking for optim… ▽ More The preparation of mechanical quadrature-squeezed states holds significant importance in cavity optomechanics because the squeezed states have extensive applications in understanding fundamental quantum mechanics and exploiting modern quantum technonogy. Here, we propose a reliable scheme for generating mechanical quadrature squeezing in a typical cavity optomechanical system via seeking for optimal cavity-field driving pulses using the gradient-descent algorithm. We realize strong quadrature squeezing in a mechanical resonator that exceeds the 3 dB steady-state limit, even with a thermal phonon occupancy of one hundred. Furthermore, the mechanical squeezing can be ultrafastly created within one mechanical oscillation period. We also obtain the optimal pulsed drivings associated with the created mechanical squeezings and analyze the mechanism for mechanical squeezing generation. This work will promote the application of optimal quantum control in quantum optics and quantum information science. △ Less

Submitted 20 May, 2024; v1 submitted 21 April, 2024; originally announced April 2024.

Comments: 11 pages, 5 figures

Learn2Talk: 3D Talking Face Learns from 2D Talking Face

Authors: Yixiang Zhuang, Bao** Cheng, Yao Cheng, Yuntao **, Renshuai Liu, Chengyang Li, Xuan Cheng, **g Liao, Juncong Lin

Abstract: Speech-driven facial animation methods usually contain two main classes, 3D and 2D talking face, both of which attract considerable research attention in recent years. However, to the best of our knowledge, the research on 3D talking face does not go deeper as 2D talking face, in the aspect of lip-synchronization (lip-sync) and speech perception. To mind the gap between the two sub-fields, we prop… ▽ More Speech-driven facial animation methods usually contain two main classes, 3D and 2D talking face, both of which attract considerable research attention in recent years. However, to the best of our knowledge, the research on 3D talking face does not go deeper as 2D talking face, in the aspect of lip-synchronization (lip-sync) and speech perception. To mind the gap between the two sub-fields, we propose a learning framework named Learn2Talk, which can construct a better 3D talking face network by exploiting two expertise points from the field of 2D talking face. Firstly, inspired by the audio-video sync network, a 3D sync-lip expert model is devised for the pursuit of lip-sync between audio and 3D facial motion. Secondly, a teacher model selected from 2D talking face methods is used to guide the training of the audio-to-3D motions regression network to yield more 3D vertex accuracy. Extensive experiments show the advantages of the proposed framework in terms of lip-sync, vertex accuracy and speech perception, compared with state-of-the-arts. Finally, we show two applications of the proposed framework: audio-visual speech recognition and speech-driven 3D Gaussian Splatting based avatar animation. △ Less

Submitted 19 April, 2024; originally announced April 2024.

AniClipart: Clipart Animation with Text-to-Video Priors

Authors: Ronghuan Wu, Wanchao Su, Kede Ma, **g Liao

Abstract: Clipart, a pre-made graphic art form, offers a convenient and efficient way of illustrating visual content. Traditional workflows to convert static clipart images into motion sequences are laborious and time-consuming, involving numerous intricate steps like rigging, key animation and in-betweening. Recent advancements in text-to-video generation hold great potential in resolving this problem. Nev… ▽ More Clipart, a pre-made graphic art form, offers a convenient and efficient way of illustrating visual content. Traditional workflows to convert static clipart images into motion sequences are laborious and time-consuming, involving numerous intricate steps like rigging, key animation and in-betweening. Recent advancements in text-to-video generation hold great potential in resolving this problem. Nevertheless, direct application of text-to-video generation models often struggles to retain the visual identity of clipart images or generate cartoon-style motions, resulting in unsatisfactory animation outcomes. In this paper, we introduce AniClipart, a system that transforms static clipart images into high-quality motion sequences guided by text-to-video priors. To generate cartoon-style and smooth motion, we first define Bézier curves over keypoints of the clipart image as a form of motion regularization. We then align the motion trajectories of the keypoints with the provided text prompt by optimizing the Video Score Distillation Sampling (VSDS) loss, which encodes adequate knowledge of natural motion within a pretrained text-to-video diffusion model. With a differentiable As-Rigid-As-Possible shape deformation algorithm, our method can be end-to-end optimized while maintaining deformation rigidity. Experimental results show that the proposed AniClipart consistently outperforms existing image-to-video generation models, in terms of text-video alignment, visual identity preservation, and motion consistency. Furthermore, we showcase the versatility of AniClipart by adapting it to generate a broader array of animation formats, such as layered animation, which allows topological changes. △ Less

Submitted 18 April, 2024; originally announced April 2024.

Comments: Project Page: https://aniclipart.github.io/

Pressure-driven right-triangle shape superconductivity in bilayer nickelate La$_3$Ni$_2$O$_7$

Authors: **gyuan Li, Peiyue Ma, Hengyuan Zhang, Xing Huang, Chaoxin Huang, Mengwu Huo, Deyuan Hu, Zixian Dong, Chengliang He, Jiahui Liao, Xiang Chen, Tao Xie, Hualei Sun, Meng Wang

Abstract: Here we report a comprehensive study of the crystal structure, resistivity, and alternating-current magnetic susceptibility in single crystals of La$_3$Ni$_2$O$_7$, with a hydrostatic pressure up to 104 GPa. X-ray diffraction measurements reveal a bilayer orthorhombic structure (space group $Amam$) at ambient pressure and a transformation into a tetragonal phase (space group $I4/mmm$) at ad critic… ▽ More Here we report a comprehensive study of the crystal structure, resistivity, and alternating-current magnetic susceptibility in single crystals of La$_3$Ni$_2$O$_7$, with a hydrostatic pressure up to 104 GPa. X-ray diffraction measurements reveal a bilayer orthorhombic structure (space group $Amam$) at ambient pressure and a transformation into a tetragonal phase (space group $I4/mmm$) at ad critical pressure of $\sim$14 GPa. The transport measurements reveal a right-triangle shape superconducting region with a maximum $T_c$ of 83 K at 18.0 GPa. The superconductivity is gradually suppressed when applying a higher pressure, but it can persist up to 90 GPa. Importantly, we measured the Meissner effect of superconductivity using an alternating-current magnetic susceptibility technique under pressure and estimated the maximum superconducting volume fraction of being 48$\%$ at 19.4 GPa. Thus, we demonstrate the bulk nature of superconductivity in the bilayer nickelate La$_3$Ni$_2$O$_7$ under high pressure. The intimate connection among the superconductivity, the oxygen content, and the tetragonal structure are discussed. △ Less

Submitted 24 April, 2024; v1 submitted 17 April, 2024; originally announced April 2024.

Comments: 4 figures in the article and 4 figures in the supplementary. Comments and suggestions are welcome!

The Ninth NTIRE 2024 Efficient Super-Resolution Challenge Report

Authors: Bin Ren, Yawei Li, Nancy Mehta, Radu Timofte, Hongyuan Yu, Cheng Wan, Yuxin Hong, Bingnan Han, Zhuoyuan Wu, Yajun Zou, Yuqing Liu, Jizhe Li, Keji He, Chao Fan, Heng Zhang, Xiaolin Zhang, Xuanwu Yin, Kunlong Zuo, Bohao Liao, Peizhe Xia, Long Peng, Zhibo Du, Xin Di, Wangkai Li, Yang Wang , et al. (109 additional authors not shown)

Abstract: This paper provides a comprehensive review of the NTIRE 2024 challenge, focusing on efficient single-image super-resolution (ESR) solutions and their outcomes. The task of this challenge is to super-resolve an input image with a magnification factor of x4 based on pairs of low and corresponding high-resolution images. The primary objective is to develop networks that optimize various aspects such… ▽ More This paper provides a comprehensive review of the NTIRE 2024 challenge, focusing on efficient single-image super-resolution (ESR) solutions and their outcomes. The task of this challenge is to super-resolve an input image with a magnification factor of x4 based on pairs of low and corresponding high-resolution images. The primary objective is to develop networks that optimize various aspects such as runtime, parameters, and FLOPs, while still maintaining a peak signal-to-noise ratio (PSNR) of approximately 26.90 dB on the DIV2K_LSDIR_valid dataset and 26.99 dB on the DIV2K_LSDIR_test dataset. In addition, this challenge has 4 tracks including the main track (overall performance), sub-track 1 (runtime), sub-track 2 (FLOPs), and sub-track 3 (parameters). In the main track, all three metrics (ie runtime, FLOPs, and parameter count) were considered. The ranking of the main track is calculated based on a weighted sum-up of the scores of all other sub-tracks. In sub-track 1, the practical runtime performance of the submissions was evaluated, and the corresponding score was used to determine the ranking. In sub-track 2, the number of FLOPs was considered. The score calculated based on the corresponding FLOPs was used to determine the ranking. In sub-track 3, the number of parameters was considered. The score calculated based on the corresponding parameters was used to determine the ranking. RLFN is set as the baseline for efficiency measurement. The challenge had 262 registered participants, and 34 teams made valid submissions. They gauge the state-of-the-art in efficient single-image super-resolution. To facilitate the reproducibility of the challenge and enable other researchers to build upon these findings, the code and the pre-trained model of validated solutions are made publicly available at https://github.com/Amazingren/NTIRE2024_ESR/. △ Less

Submitted 25 June, 2024; v1 submitted 16 April, 2024; originally announced April 2024.

Comments: The report paper of NTIRE2024 Efficient Super-resolution, accepted by CVPRW2024

Improved Exponent for Marton's Conjecture in $\mathbb{F}_2^n$

Authors: Jyun-Jie Liao

Abstract: A conjecture of Marton, widely known as the polynomial Freiman-Ruzsa conjecture, was recently proved by Gowers, Green, Manners and Tao for any bounded-torsion Abelian group $G$. In this paper we show a few simple modifications that improve their bound in $G=\mathbb{F}_2^n$. Specifically, for $G=\mathbb{F}_2^n$, they proved that any set $A\subseteq G$ with $|A+A|\le K|A|$ can be covered by at most… ▽ More A conjecture of Marton, widely known as the polynomial Freiman-Ruzsa conjecture, was recently proved by Gowers, Green, Manners and Tao for any bounded-torsion Abelian group $G$. In this paper we show a few simple modifications that improve their bound in $G=\mathbb{F}_2^n$. Specifically, for $G=\mathbb{F}_2^n$, they proved that any set $A\subseteq G$ with $|A+A|\le K|A|$ can be covered by at most $2K^C$ cosets of a subgroup $H$ of $G$ of cardinality at most $|A|$, with $C=12$. In this paper we prove the same statement for $C=9$. △ Less

Submitted 15 April, 2024; originally announced April 2024.

Tests of the Kerr Hypothesis with MAXI J1803-298 Using Different RELXILL_NK Flavors

Authors: Jie Liao, M. Ghasemi-Nodehi, Lang Cui, Ashutosh Tripathi, Yong-Feng Huang, Xiang Liu

Abstract: Iron line spectroscopy has been one of the leading methods not only for measuring the spins of accreting black holes but also for testing fundamental physics. Basing on such a method, we present an analysis of a dataset observed simultaneously by NuSTAR and NICER for the black hole binary candidate MAXI J1803-298, which shows prominent relativistic reflection features. Various relxill_nk flavors a… ▽ More Iron line spectroscopy has been one of the leading methods not only for measuring the spins of accreting black holes but also for testing fundamental physics. Basing on such a method, we present an analysis of a dataset observed simultaneously by NuSTAR and NICER for the black hole binary candidate MAXI J1803-298, which shows prominent relativistic reflection features. Various relxill_nk flavors are utilized to test the Kerr black hole hypothesis. The results obtained from our analysis provide stringent constraints on Johannsen deformation parameter $α_{13}$ with the highest precise to date, namely $α_{13}=0.023^{+0.071}_{-0.038}$ from relxillD_nk and $α_{13}=0.006^{+0.045}_{-0.022}$ from relxillion_nk respectively in 3-$σ$ credible lever, where Johannsen metric reduces to Kerr metric when $α_{13}$ vanishes. Furthermore, we investigate the best model-fit results using Akaike Information Criterion and assess its systematic uncertainties. △ Less

Submitted 9 April, 2024; originally announced April 2024.

Comments: Accepted by ApJ

Optimizing Information Propagation for Blockchain-empowered Mobile AIGC: A Graph Attention Network Approach

Authors: Jiana Liao, **bo Wen, Jiawen Kang, Yang Zhang, Jianbo Du, Qihao Li, Weiting Zhang, Dong Yang

Abstract: Artificial Intelligence-Generated Content (AIGC) is a rapidly evolving field that utilizes advanced AI algorithms to generate content. Through integration with mobile edge networks, mobile AIGC networks have gained significant attention, which can provide real-time customized and personalized AIGC services and products. Since blockchains can facilitate decentralized and transparent data management… ▽ More Artificial Intelligence-Generated Content (AIGC) is a rapidly evolving field that utilizes advanced AI algorithms to generate content. Through integration with mobile edge networks, mobile AIGC networks have gained significant attention, which can provide real-time customized and personalized AIGC services and products. Since blockchains can facilitate decentralized and transparent data management, AIGC products can be securely managed by blockchain to avoid tampering and plagiarization. However, the evolution of blockchain-empowered mobile AIGC is still in its nascent phase, grappling with challenges such as improving information propagation efficiency to enable blockchain-empowered mobile AIGC. In this paper, we design a Graph Attention Network (GAT)-based information propagation optimization framework for blockchain-empowered mobile AIGC. We first innovatively apply age of information as a data-freshness metric to measure information propagation efficiency in public blockchains. Considering that GATs possess the excellent ability to process graph-structured data, we utilize the GAT to obtain the optimal information propagation trajectory. Numerical results demonstrate that the proposed scheme exhibits the most outstanding information propagation efficiency compared with traditional routing mechanisms. △ Less

Submitted 7 April, 2024; originally announced April 2024.

Comments: arXiv admin note: substantial text overlap with arXiv:2403.13237

RaFE: Generative Radiance Fields Restoration

Authors: Zhongkai Wu, Ziyu Wan, **g Zhang, **g Liao, Dong Xu

Abstract: NeRF (Neural Radiance Fields) has demonstrated tremendous potential in novel view synthesis and 3D reconstruction, but its performance is sensitive to input image quality, which struggles to achieve high-fidelity rendering when provided with low-quality sparse input viewpoints. Previous methods for NeRF restoration are tailored for specific degradation type, ignoring the generality of restoration.… ▽ More NeRF (Neural Radiance Fields) has demonstrated tremendous potential in novel view synthesis and 3D reconstruction, but its performance is sensitive to input image quality, which struggles to achieve high-fidelity rendering when provided with low-quality sparse input viewpoints. Previous methods for NeRF restoration are tailored for specific degradation type, ignoring the generality of restoration. To overcome this limitation, we propose a generic radiance fields restoration pipeline, named RaFE, which applies to various types of degradations, such as low resolution, blurriness, noise, compression artifacts, or their combinations. Our approach leverages the success of off-the-shelf 2D restoration methods to recover the multi-view images individually. Instead of reconstructing a blurred NeRF by averaging inconsistencies, we introduce a novel approach using Generative Adversarial Networks (GANs) for NeRF generation to better accommodate the geometric and appearance inconsistencies present in the multi-view images. Specifically, we adopt a two-level tri-plane architecture, where the coarse level remains fixed to represent the low-quality NeRF, and a fine-level residual tri-plane to be added to the coarse level is modeled as a distribution with GAN to capture potential variations in restoration. We validate RaFE on both synthetic and real cases for various restoration tasks, demonstrating superior performance in both quantitative and qualitative evaluations, surpassing other 3D restoration methods specific to single task. Please see our project website https://zkaiwu.github.io/RaFE-Project/. △ Less

Submitted 7 April, 2024; v1 submitted 4 April, 2024; originally announced April 2024.

Comments: Project Page: https://zkaiwu.github.io/RaFE

Diffusion-based Aesthetic QR Code Generation via Scanning-Robust Perceptual Guidance

Authors: Jia-Wei Liao, Winston Wang, Tzu-Sian Wang, Li-Xuan Peng, Cheng-Fu Chou, Jun-Cheng Chen

Abstract: QR codes, prevalent in daily applications, lack visual appeal due to their conventional black-and-white design. Integrating aesthetics while maintaining scannability poses a challenge. In this paper, we introduce a novel diffusion-model-based aesthetic QR code generation pipeline, utilizing pre-trained ControlNet and guided iterative refinement via a novel classifier guidance (SRG) based on the pr… ▽ More QR codes, prevalent in daily applications, lack visual appeal due to their conventional black-and-white design. Integrating aesthetics while maintaining scannability poses a challenge. In this paper, we introduce a novel diffusion-model-based aesthetic QR code generation pipeline, utilizing pre-trained ControlNet and guided iterative refinement via a novel classifier guidance (SRG) based on the proposed Scanning-Robust Loss (SRL) tailored with QR code mechanisms, which ensures both aesthetics and scannability. To further improve the scannability while preserving aesthetics, we propose a two-stage pipeline with Scanning-Robust Perceptual Guidance (SRPG). Moreover, we can further enhance the scannability of the generated QR code by post-processing it through the proposed Scanning-Robust Projected Gradient Descent (SRPGD) post-processing technique based on SRL with proven convergence. With extensive quantitative, qualitative, and subjective experiments, the results demonstrate that the proposed approach can generate diverse aesthetic QR codes with flexibility in detail. In addition, our pipelines outperforming existing models in terms of Scanning Success Rate (SSR) 86.67% (+40%) with comparable aesthetic scores. The pipeline combined with SRPGD further achieves 96.67% (+50%). Our code will be available https://github.com/jwliao1209/DiffQRCode. △ Less

Submitted 23 March, 2024; originally announced March 2024.

Graph Attention Network-based Block Propagation with Optimal AoI and Reputation in Web 3.0

Authors: Jiana Liao, **bo Wen, Jiawen Kang, Changyan Yi, Yang Zhang, Yutao Jiao, Dusit Niyato, Dong In Kim, Shengli Xie

Abstract: Web 3.0 is recognized as a pioneering paradigm that empowers users to securely oversee data without reliance on a centralized authority. Blockchains, as a core technology to realize Web 3.0, can facilitate decentralized and transparent data management. Nevertheless, the evolution of blockchain-enabled Web 3.0 is still in its nascent phase, grappling with challenges such as ensuring efficiency and… ▽ More Web 3.0 is recognized as a pioneering paradigm that empowers users to securely oversee data without reliance on a centralized authority. Blockchains, as a core technology to realize Web 3.0, can facilitate decentralized and transparent data management. Nevertheless, the evolution of blockchain-enabled Web 3.0 is still in its nascent phase, grappling with challenges such as ensuring efficiency and reliability to enhance block propagation performance. In this paper, we design a Graph Attention Network (GAT)-based reliable block propagation optimization framework for blockchain-enabled Web 3.0. We first innovatively apply a data-freshness metric called age of block to measure block propagation efficiency in public blockchains. To achieve the reliability of block propagation, we introduce a reputation mechanism based on the subjective logic model, including the local and recommended opinions to calculate the miner reputation value. Moreover, considering that the GAT possesses the excellent ability to process graph-structured data, we utilize the GAT with reinforcement learning to obtain the optimal block propagation trajectory. Numerical results demonstrate that the proposed scheme exhibits the most outstanding block propagation efficiency and reliability compared with traditional routing mechanisms. △ Less

Submitted 8 May, 2024; v1 submitted 19 March, 2024; originally announced March 2024.

Improved modeling of in-ice particle showers for IceCube event reconstruction

Authors: R. Abbasi, M. Ackermann, J. Adams, S. K. Agarwalla, J. A. Aguilar, M. Ahlers, J. M. Alameddine, N. M. Amin, K. Andeen, G. Anton, C. Argüelles, Y. Ashida, S. Athanasiadou, L. Ausborm, S. N. Axani, X. Bai, A. Balagopal V., M. Baricevic, S. W. Barwick, S. Bash, V. Basu, R. Bay, J. J. Beatty, J. Becker Tjus, J. Beise , et al. (394 additional authors not shown)

Abstract: The IceCube Neutrino Observatory relies on an array of photomultiplier tubes to detect Cherenkov light produced by charged particles in the South Pole ice. IceCube data analyses depend on an in-depth characterization of the glacial ice, and on novel approaches in event reconstruction that utilize fast approximations of photoelectron yields. Here, a more accurate model is derived for event reconstr… ▽ More The IceCube Neutrino Observatory relies on an array of photomultiplier tubes to detect Cherenkov light produced by charged particles in the South Pole ice. IceCube data analyses depend on an in-depth characterization of the glacial ice, and on novel approaches in event reconstruction that utilize fast approximations of photoelectron yields. Here, a more accurate model is derived for event reconstruction that better captures our current knowledge of ice optical properties. When evaluated on a Monte Carlo simulation set, the median angular resolution for in-ice particle showers improves by over a factor of three compared to a reconstruction based on a simplified model of the ice. The most substantial improvement is obtained when including effects of birefringence due to the polycrystalline structure of the ice. When evaluated on data classified as particle showers in the high-energy starting events sample, a significantly improved description of the events is observed. △ Less

Submitted 22 April, 2024; v1 submitted 4 March, 2024; originally announced March 2024.

Comments: 28 pages, 18 figures, 1 table, submitted to JINST, updated to account for comments received

Journal ref: 2024 JINST 19 P06026

COFT-AD: COntrastive Fine-Tuning for Few-Shot Anomaly Detection

Authors: **gyi Liao, Xun Xu, Manh Cuong Nguyen, Adam Goodge, Chuan Sheng Foo

Abstract: Existing approaches towards anomaly detection~(AD) often rely on a substantial amount of anomaly-free data to train representation and density models. However, large anomaly-free datasets may not always be available before the inference stage; in which case an anomaly detection model must be trained with only a handful of normal samples, a.k.a. few-shot anomaly detection (FSAD). In this paper, we… ▽ More Existing approaches towards anomaly detection~(AD) often rely on a substantial amount of anomaly-free data to train representation and density models. However, large anomaly-free datasets may not always be available before the inference stage; in which case an anomaly detection model must be trained with only a handful of normal samples, a.k.a. few-shot anomaly detection (FSAD). In this paper, we propose a novel methodology to address the challenge of FSAD which incorporates two important techniques. Firstly, we employ a model pre-trained on a large source dataset to initialize model weights. Secondly, to ameliorate the covariate shift between source and target domains, we adopt contrastive training to fine-tune on the few-shot target domain data. To learn suitable representations for the downstream AD task, we additionally incorporate cross-instance positive pairs to encourage a tight cluster of the normal samples, and negative pairs for better separation between normal and synthesized negative samples. We evaluate few-shot anomaly detection on on 3 controlled AD tasks and 4 real-world AD tasks to demonstrate the effectiveness of the proposed method. △ Less

Submitted 29 February, 2024; originally announced February 2024.

Comments: IEEE Transactions on Image Processing

Characterization of the Astrophysical Diffuse Neutrino Flux using Starting Track Events in IceCube

Authors: R. Abbasi, M. Ackermann, J. Adams, S. K. Agarwalla, J. A. Aguilar, M. Ahlers, J. M. Alameddine, N. M. Amin, K. Andeen, G. Anton, C. Argüelles, Y. Ashida, S. Athanasiadou, L. Ausborm, S. N. Axani, X. Bai, A. Balagopal V., M. Baricevic, S. W. Barwick, S. Bash, V. Basu, R. Bay, J. J. Beatty, J. Becker Tjus, J. Beise , et al. (394 additional authors not shown)

Abstract: A measurement of the diffuse astrophysical neutrino spectrum is presented using IceCube data collected from 2011-2022 (10.3 years). We developed novel detection techniques to search for events with a contained vertex and exiting track induced by muon neutrinos undergoing a charged-current interaction. Searching for these starting track events allows us to not only more effectively reject atmospher… ▽ More A measurement of the diffuse astrophysical neutrino spectrum is presented using IceCube data collected from 2011-2022 (10.3 years). We developed novel detection techniques to search for events with a contained vertex and exiting track induced by muon neutrinos undergoing a charged-current interaction. Searching for these starting track events allows us to not only more effectively reject atmospheric muons but also atmospheric neutrino backgrounds in the southern sky, opening a new window to the sub-100 TeV astrophysical neutrino sky. The event selection is constructed using a dynamic starting track veto and machine learning algorithms. We use this data to measure the astrophysical diffuse flux as a single power law flux (SPL) with a best-fit spectral index of $γ= 2.58 ^{+0.10}_{-0.09}$ and per-flavor normalization of $φ^{\mathrm{Astro}}_{\mathrm{per-flavor}} = 1.68 ^{+0.19}_{-0.22} \times 10^{-18} \times \mathrm{GeV}^{-1} \mathrm{cm}^{-2} \mathrm{s}^{-1} \mathrm{sr}^{-1}$ (at 100 TeV). The sensitive energy range for this dataset is 3 - 550 TeV under the SPL assumption. This data was also used to measure the flux under a broken power law, however we did not find any evidence of a low energy cutoff. △ Less

Submitted 27 February, 2024; originally announced February 2024.

Comments: 27 pages, 28 figures

Journal ref: Phys. Rev. D 110, 022001 (2024)

Autonomous Shuttle Operation for Vulnerable Populations: Lessons and Experiences

Authors: Ren Zhong, Zhaofeng Tian, **ghui Liao, Weisong Shi

Abstract: The increasing shortage of drivers poses a significant threat to vulnerable populations, particularly seniors and disabled individuals who heavily depend on public transportation for accessing healthcare services and social events. Autonomous Vehicles (AVs) emerge as a promising alternative, offering potential improvements in accessibility and independence for these groups. However, current design… ▽ More The increasing shortage of drivers poses a significant threat to vulnerable populations, particularly seniors and disabled individuals who heavily depend on public transportation for accessing healthcare services and social events. Autonomous Vehicles (AVs) emerge as a promising alternative, offering potential improvements in accessibility and independence for these groups. However, current designs and studies often overlook the unique needs and experiences of these populations, leading to potential accessibility barriers. This paper presents a detailed case study of an autonomous shuttle test specifically tailored for seniors and disabled individuals, conducted during the early stages of the COVID-19 pandemic. The service, which lasted 13 weeks, catered to approximately 1500 passengers in an urban setting, aiming to facilitate access to essential services. Drawing from the safety operator's experiences and direct observations, we identify critical user experience and safety challenges faced by vulnerable passengers. Based on our findings, we propose targeted initiatives to enhance the safety, accessibility, and user education of AV technology for seniors and disabled individuals. These include increasing educational opportunities to familiarize these groups with AV technology, designing AVs with a focus on diversity and inclusion, and improving training programs for AV operators to address the unique needs of vulnerable populations. Through these initiatives, we aim to bridge the gap in AV accessibility and ensure that these technologies benefit all members of society. △ Less

Submitted 28 February, 2024; v1 submitted 27 February, 2024; originally announced February 2024.

Joint Resource Allocation and Trajectory Design for Resilient Multi-UAV Communication Networks

Authors: Linghui Ge, Xiao Liang, Hua Zhang, Peihao Dong, Jianxin Liao, **gyu Wang

Abstract: In contrast to terrestrial wireless networks, dynamic Unmanned Aerial Vehicle (UAV) networks are susceptible to unexpected link failures arising from UAV breakdowns or the depletion of its batteries. Drastic user rate fluctuations and sum rate drops can occur due to the unexpected UAV link failures. Previous research has focused primarily on re-establishing these links to maintain service continui… ▽ More In contrast to terrestrial wireless networks, dynamic Unmanned Aerial Vehicle (UAV) networks are susceptible to unexpected link failures arising from UAV breakdowns or the depletion of its batteries. Drastic user rate fluctuations and sum rate drops can occur due to the unexpected UAV link failures. Previous research has focused primarily on re-establishing these links to maintain service continuity, while neglecting overall system performance, including sum rate and user rate fluctuations. This letter proposes a resilient UAV network design utilizing the modern portfolio theory (MPT), which jointly optimizes the bandwidth allocation, UAV-user association, and UAV trajectories to enhance the overall service stability. Specifically, the design incorporates a novel utility function based on MPT to achieve a better balance between the sum rate and user rate fluctuations. To solve the joint optimization problem, we propose an iterative algorithm based on alternating optimization (AO) and successive convex approximation (SCA). Simulation results show that our scheme outperforms the other two baselines in terms of sum rate and user rate fluctuations. Furthermore, the resilience requirement in terms of sum rate, user rate fluctuations and user fairness can be achieved by flexibly tuning weight factor in our proposed algorithm. △ Less

Submitted 20 January, 2024; originally announced February 2024.

Journal ref: IEEE Wireless Communications Letters, 2024

TEaR: Improving LLM-based Machine Translation with Systematic Self-Refinement

Authors: Zhaopeng Feng, Yan Zhang, Hao Li, Bei Wu, Jiayu Liao, Wenqiang Liu, Jun Lang, Yang Feng, Jian Wu, Zuozhu Liu

Abstract: Large Language Models (LLMs) have achieved impressive results in Machine Translation (MT). However, careful evaluations by human reveal that the translations produced by LLMs still contain multiple errors. Importantly, feeding back such error information into the LLMs can lead to self-refinement and result in improved translation performance. Motivated by these insights, we introduce a systematic… ▽ More Large Language Models (LLMs) have achieved impressive results in Machine Translation (MT). However, careful evaluations by human reveal that the translations produced by LLMs still contain multiple errors. Importantly, feeding back such error information into the LLMs can lead to self-refinement and result in improved translation performance. Motivated by these insights, we introduce a systematic LLM-based self-refinement translation framework, named \textbf{TEaR}, which stands for \textbf{T}ranslate, \textbf{E}stimate, \textbf{a}nd \textbf{R}efine, marking a significant step forward in this direction. Our findings demonstrate that 1) our self-refinement framework successfully assists LLMs in improving their translation quality across a wide range of languages, whether it's from high-resource languages to low-resource ones or whether it's English-centric or centered around other languages; 2) TEaR exhibits superior systematicity and interpretability; 3) different estimation strategies yield varied impacts, directly affecting the effectiveness of the final corrections. Additionally, traditional neural translation models and evaluation models operate separately, often focusing on singular tasks due to their limited capabilities, while general-purpose LLMs possess the capability to undertake both tasks simultaneously. We further conduct cross-model correction experiments to investigate the potential relationship between the translation and evaluation capabilities of general-purpose LLMs. Our code and data are available at https://github.com/fzp0424/self_correct_mt △ Less

Submitted 21 June, 2024; v1 submitted 26 February, 2024; originally announced February 2024.

Comments: Our code and data are available at https://github.com/fzp0424/self_correct_mt

Studying exotic hadrons in high energy nuclear collisions

Authors: Xingyu Guo, **feng Liao, Hongxi Xing

Abstract: Studies of exotic hadrons such as the $χ_{cl}(3872)$ state provide crucial insights into the fundamental force governing the strong interaction dynamics, with an emerging new frontier to investigate their production in high energy nuclear collisions where a partonic medium is present. This contribution discusses the production mechanisms of exotic hadrons in such collisions and analyzes novel effe… ▽ More Studies of exotic hadrons such as the $χ_{cl}(3872)$ state provide crucial insights into the fundamental force governing the strong interaction dynamics, with an emerging new frontier to investigate their production in high energy nuclear collisions where a partonic medium is present. This contribution discusses the production mechanisms of exotic hadrons in such collisions and analyzes novel effects from the partonic medium, demonstrating the potential to use heavy ion measurements for deciphering their internal structure and understanding their in-medium evolutions. △ Less

Submitted 23 February, 2024; originally announced February 2024.

Comments: 4 pages, 4 figures, contribution to the proceeding of Quark Matter 2023. arXiv admin note: text overlap with arXiv:2302.03828

Coded Backscattering Communication with LTE Pilots as Ambient Signal

Authors: **gyi Liao, Kalle Ruttik, Riku Jantti, Phan-Huy Dinh-Thuy

Abstract: The 3GPP has recently conducted a study on the Ambient Internet of Things (AIoT), with a particular emphasis on examining backscatter communications as one of the primary techniques under consideration. Previous investigations into Ambient Backscatter Communications (AmBC) within the long term evolution (LTE) downlink have shown that it is feasible to utilize the user equipment channel estimator a… ▽ More The 3GPP has recently conducted a study on the Ambient Internet of Things (AIoT), with a particular emphasis on examining backscatter communications as one of the primary techniques under consideration. Previous investigations into Ambient Backscatter Communications (AmBC) within the long term evolution (LTE) downlink have shown that it is feasible to utilize the user equipment channel estimator as a receiver for demodulating frequency shift keyed (FSK) messages transmitted by the backscatter devices. In practical deployment scenarios, the backscattered link often experiences a low signal-to-noise ratio, leading to subpar bit error rate (BER) performance in the case of uncoded transmissions. In this paper, we propose the adoption of the same convolutional coding methodology for backscatter links that is already employed for LTE downlink control signals. This approach facilitates the reuse of identical demodulation functions at the modem for both control signals and backscattered AIoT messages. To assess the performance of the proposed scheme, we conducted experiments utilizing real LTE downlink signals generated by a mobile operator within an office environment. When compared to uncoded FSK, convolutional channel coding delivers a notable gain of approximately 6 dB at a BER of $10^{-3}$. Consequently, the AmBC system demonstrates a high level of reliability, achieving a BER of $10^{-3}$ at a Signal-to-Noise Ratio (SNR) of 5 dB. △ Less

Submitted 20 February, 2024; v1 submitted 19 February, 2024; originally announced February 2024.