-
The Role of Interfacial Morphology in Cu2O/TiO2 and Band Bending: Insights from Density Functional Theory
Authors:
Mona Asadinamin,
Aleksandar Živkovic,
Nora H. De Leeuw,
Steven P. Lewis
Abstract:
Photocatalysis, a promising solution for environmental challenges, relies on the generation and utilization of photogenerated charge carriers within photocatalysts. However, recombination of these carriers often limits efficiency. Heterostructures, especially Cu2O/TiO2, have emerged as effective solutions to enhance charge separation. This study systematically explores the effect of interfacial mo…
▽ More
Photocatalysis, a promising solution for environmental challenges, relies on the generation and utilization of photogenerated charge carriers within photocatalysts. However, recombination of these carriers often limits efficiency. Heterostructures, especially Cu2O/TiO2, have emerged as effective solutions to enhance charge separation. This study systematically explores the effect of interfacial morphologies on the band bending within Cu2O/TiO2 anatase heterostructures, employing density functional theory (DFT). Through this study, eight distinct interfaces are identified and analyzed, revealing a consistent staggered-type band alignment. Despite variations in band edge positions, a systematic charge transfer from Cu2O to TiO2 is observed across all interfaces. The proposed band bending configurations would suggest enhanced charge separation and photocatalytic activity under ultraviolet illumination due to a Z-scheme configuration. This theoretical investigation provides valuable insights into the interplay between interfacial morphology, band bending, and charge transfer, for advancing the understanding of fundamental electronic mechanisms in heterostructures.
△ Less
Submitted 14 March, 2024;
originally announced March 2024.
-
A Comprehensive Study of Hydrogen Adsorbing to Amorphous Water-Ice: Defining Adsorption in Classical Molecular Dynamics
Authors:
John L. Dupuy,
Steven P. Lewis,
P. C. Stancil
Abstract:
Gas-grain and gas-phase reactions dominate the formation of molecules in the interstellar medium (ISM). Gas-grain reactions require a substrate (e.g. a dust or ice grain) on which the reaction is able to occur. The formation of molecular hydrogen (H$_2$) in the ISM is the prototypical example of a gas-grain reaction. In these reactions, an atom of hydrogen will strike a surface, stick to it, and d…
▽ More
Gas-grain and gas-phase reactions dominate the formation of molecules in the interstellar medium (ISM). Gas-grain reactions require a substrate (e.g. a dust or ice grain) on which the reaction is able to occur. The formation of molecular hydrogen (H$_2$) in the ISM is the prototypical example of a gas-grain reaction. In these reactions, an atom of hydrogen will strike a surface, stick to it, and diffuse across it. When it encounters another adsorbed hydrogen atom, the two can react to form molecular hydrogen and then be ejected from the surface by the energy released in the reaction. We perform in-depth classical molecular dynamics (MD) simulations of hydrogen atoms interacting with an amorphous water-ice surface. This study focuses on the first step in the formation process; the sticking of the hydrogen atom to the substrate. We find that careful attention must be paid in dealing with the ambiguities in defining a sticking event. The technical definition of a sticking event will affect the computed sticking probabilities and coefficients. Here, using our new definition of a sticking event, we report sticking probabilities and sticking coefficients for nine different incident kinetic energies of hydrogen atoms [5 K - 400 K] across seven different temperatures of dust grains [10 K - 70 K]. We find that probabilities and coefficients vary both as a function of grain temperature and incident kinetic energy over the range of 0.99 - 0.22.
△ Less
Submitted 17 August, 2016;
originally announced August 2016.
-
Revisiting the (110) Surface Structure of TiO2: A Detailed Theoretical Analysis
Authors:
Scott J. Thompson,
Steven P. Lewis
Abstract:
A detailed reexamination of the (110) surface structure of rutile TiO2 has been carried out using first-principles total-energy methods. This investigation is in response to a recent high-precision LEED-IV measurement revealing certain significant quantitative discrepancies between experiment and previous theoretical calculations. We have been able to resolve these discrepancies and achieve exce…
▽ More
A detailed reexamination of the (110) surface structure of rutile TiO2 has been carried out using first-principles total-energy methods. This investigation is in response to a recent high-precision LEED-IV measurement revealing certain significant quantitative discrepancies between experiment and previous theoretical calculations. We have been able to resolve these discrepancies and achieve excellent quantitative agreement with experiment by judicious attention to reducing computational approximation errors. Our analysis also reveals that bond lengths converge much faster with slab thickness than do relaxed absolute atomic positions, which are the structural parameters typically reported in the literature for this and related systems. The effect this observation has on both the choice of slab models and the way in which surfaces structures should be reported for covalently bonded solids is discussed. Finally, the efficacy of freezing the lowest several atomic layers of TiO2 slab models in their bulk-like positions is examined.
△ Less
Submitted 30 January, 2006; v1 submitted 14 November, 2005;
originally announced November 2005.
-
Controlling adsorbate vibrational lifetimes using superlattices
Authors:
Steven P. Lewis,
Andrew M. Rappe
Abstract:
We propose using short-period superlattices as substrates to control the vibrational relaxation dynamics of adsorbate overlayers. The mass modulation of superlattices creates both band gaps and large spectral enhancements in the phonon density of states. These modifications can dramatically alter the coupling between vibrational modes of the adsorbate overlayer and the substrate lattice, thereby…
▽ More
We propose using short-period superlattices as substrates to control the vibrational relaxation dynamics of adsorbate overlayers. The mass modulation of superlattices creates both band gaps and large spectral enhancements in the phonon density of states. These modifications can dramatically alter the coupling between vibrational modes of the adsorbate overlayer and the substrate lattice, thereby significantly affecting the lifetime of adsorbate modes.
△ Less
Submitted 25 August, 2000;
originally announced August 2000.
-
Adsorbate aggregation and relaxation of low-frequency vibrations
Authors:
M. V. Pykhtin,
Andrew M. Rappe,
Steven P. Lewis
Abstract:
We present a study of resonant vibrational coupling between adsorbates and an elastic substrate at low macroscopic coverages. In the first part of the paper we consider the situation when adsorbates form aggregates with high local coverage. Based upon our previously published theory, we derive formulas describing the dam** rate of adsorbate vibrations for two cases of such aggregation: (i) ads…
▽ More
We present a study of resonant vibrational coupling between adsorbates and an elastic substrate at low macroscopic coverages. In the first part of the paper we consider the situation when adsorbates form aggregates with high local coverage. Based upon our previously published theory, we derive formulas describing the dam** rate of adsorbate vibrations for two cases of such aggregation: (i) adsorbates attached to step edges and (ii) adsorbates forming two-dimensional islands. We have shown that dam** is governed by local coverage. Particularly, for a wide range of resonant frequencies, the dam** rate of adsorbates forming well separated islands is described by the dam** rate formula for a periodic overlayer with the coverage equal to the local coverage in the island. The second part of the paper is devoted to facilitating the evaluation of dam** rates for a disordered overlayer. The formula describing the dam** rate involves the parameter $β$ which is related to the local density of phonon states at the substrate surface and does not allow a closed-form representation. For substrates of isotropic and cubic symmetries, we have developed a good analytical approximation to this parameter. For a vast majority of cubic substrates the difference between the analytical approximation and numerical calculation does not exceed 4%.
△ Less
Submitted 25 August, 2000;
originally announced August 2000.
-
First Principles Study of Carbon Monoxide Adsorption on Zirconia-Supported Copper
Authors:
Eric J. Walter,
Steven P. Lewis,
Andrew M. Rappe
Abstract:
We have calculated the adsorption energy of carbon monoxide on a monolayer of copper adsorbed on the (111) face of cubic zirconia. We investigate the structural parameters of three phases of bulk zirconia (cubic, tetragonal, and monoclinic) and find excellent agreement with experiment. We have also analyzed the structural relaxation of both the stoichiometric and reduced (111) surfaces of cubic…
▽ More
We have calculated the adsorption energy of carbon monoxide on a monolayer of copper adsorbed on the (111) face of cubic zirconia. We investigate the structural parameters of three phases of bulk zirconia (cubic, tetragonal, and monoclinic) and find excellent agreement with experiment. We have also analyzed the structural relaxation of both the stoichiometric and reduced (111) surfaces of cubic zirconia ($c$-ZrO$_2$). For adsorption of copper on $c$-ZrO$_2$, we find that the preferred binding site is atop the terminal oxygen atom, favored by 0.3 eV over other high symmetry sites. We compare CO adsorption on zirconia-supported copper to the results of carbon monoxide on copper (100) (S. P. Lewis and A. M. Rappe, J. Chem. Phys. {\bf 110}, 4619,(1999).) and show that adsorption on oxide-supported copper is over 0.2 eV more stable than adsorption on the bare surface.
△ Less
Submitted 10 December, 1999;
originally announced December 1999.
-
Structure and Vibrations of the Vicinal Copper (211) Surface
Authors:
C. Y. Wei,
Steven P. Lewis,
E. J. Mele,
Andrew M. Rappe
Abstract:
We report a first principles theoretical study of the surface relaxation and lattice dynamics of the Cu(211) surface using the plane wave pseudopotential method. We find large atomic relaxations for the first several atomic layers near the step edges on this surface, and a substantial step-induced renormalization of the surface harmonic force constants. We use the results to study the harmonic f…
▽ More
We report a first principles theoretical study of the surface relaxation and lattice dynamics of the Cu(211) surface using the plane wave pseudopotential method. We find large atomic relaxations for the first several atomic layers near the step edges on this surface, and a substantial step-induced renormalization of the surface harmonic force constants. We use the results to study the harmonic fluctuations around the equilibrium structure and find three new step-derived features in the zone center vibrational spectrum. Comparison of these results with previous theoretical work and weith experimental studies using inelastic He scattering are reported.
△ Less
Submitted 5 December, 1997;
originally announced December 1997.
-
Continuum Elastic Theory of Adsorbate Vibrational Relaxation
Authors:
Steven P. Lewis,
M. V. Pykhtin,
E. J. Mele,
Andrew M. Rappe
Abstract:
An analytical theory is presented for the dam** of low-frequency adsorbate vibrations via resonant coupling to the substrate phonons. The system is treated classically, with the substrate modeled as a semi-infinite elastic continuum and the adsorbate overlayer modeled as an array of point masses connected to the surface by harmonic springs. The theory provides a simple expression for the relax…
▽ More
An analytical theory is presented for the dam** of low-frequency adsorbate vibrations via resonant coupling to the substrate phonons. The system is treated classically, with the substrate modeled as a semi-infinite elastic continuum and the adsorbate overlayer modeled as an array of point masses connected to the surface by harmonic springs. The theory provides a simple expression for the relaxation rate in terms of fundamental parameters of the system: $γ= m\barω_0^2/A_c ρc_T$, where $m$ is the adsorbate mass, $\barω_0$ is the measured frequency, $A_c$ is the overlayer unit-cell area, and $ρ$ and $c_T$ are the substrate mass density and transverse speed of sound, respectively. This expression is strongly coverage dependent, and predicts relaxation rates in excellent quantitative agreement with available experiments. For a half-monolayer of carbon monoxide on the copper (100) surface, the predicted dam** rate of in-plane frustrated translations is $0.50\times 10^{12}$~s$^{-1}$, as compared to the experimental value of $(0.43\pm0.07)\times 10^{12}$ s$^{-1}$. Furthermore it is shown that, for all coverages presently accessible to experiment, adsorbate motions exhibit collective effects which cannot be treated as stemming from isolated oscillators.
△ Less
Submitted 30 September, 1997;
originally announced September 1997.
-
Substrate-adsorbate coupling in CO-adsorbed copper
Authors:
Steven P. Lewis,
Andrew M. Rappe
Abstract:
The vibrational properties of carbon monoxide adsorbed to the copper (100) surface are explored within density functional theory. Atoms of the substrate and adsorbate are treated on an equal footing in order to examine the effect of substrate--adsorbate coupling. This coupling is found to have a significant effect on the vibrational modes, particularly the in-plane frustrated translation, which…
▽ More
The vibrational properties of carbon monoxide adsorbed to the copper (100) surface are explored within density functional theory. Atoms of the substrate and adsorbate are treated on an equal footing in order to examine the effect of substrate--adsorbate coupling. This coupling is found to have a significant effect on the vibrational modes, particularly the in-plane frustrated translation, which mixes strongly with substrate phonons and broadens into a resonance. The predicted lifetime due to this harmonic decay mechanism is in excellent quantitative agreement with experiment.
△ Less
Submitted 23 September, 1996;
originally announced September 1996.
-
Band Structure and Transport Properties of CrO_2
Authors:
Steven P. Lewis,
Phillip B. Allen,
Taizo Sasaki
Abstract:
Local Spin Density Approximation (LSDA) is used to calculate the energy bands of both the ferromagnetic and paramagnetic phases of metallic CrO_2. The Fermi level lies in a peak in the paramagnetic density of states, and the ferromagnetic phase is more stable. As first predicted by Schwarz, the magnetic moment is 2 μ_B per Cr atom, with the Fermi level for minority spins lying in an insulating g…
▽ More
Local Spin Density Approximation (LSDA) is used to calculate the energy bands of both the ferromagnetic and paramagnetic phases of metallic CrO_2. The Fermi level lies in a peak in the paramagnetic density of states, and the ferromagnetic phase is more stable. As first predicted by Schwarz, the magnetic moment is 2 μ_B per Cr atom, with the Fermi level for minority spins lying in an insulating gap between oxygen p and chromium d states ("half-metallic" behavior.) The A_1g Raman frequency is predicted to be 587 cm^{-1}. Drude plasma frequencies are of order 2eV, as seen experimentally by Chase. The measured resistivity is used to find the electron mean-free path l, which is only a few angstroms at 600K, but nevertheless, resistivity continues to rise as temperature increases. This puts CrO_2 into the category of "bad metals" in common with the high T_c superconductors, the high T metallic phase of VO_2, and the ferromagnet SrRuO_3. In common with both SrRuO_3 and Sr_2RuO_4, the measured specific heat γis higher than band theory by a renormalization factor close to 4.
△ Less
Submitted 23 August, 1996;
originally announced August 1996.
-
Reciprocity Theorems for Ab Initio Force Calculations
Authors:
C. Wei,
Steven P. Lewis,
E. J. Mele,
Andrew M. Rappe
Abstract:
We present a method for calculating ab initio interatomic forces which scales quadratically with the size of the system and provides a physically transparent representation of the force in terms of the spatial variation of the electronic charge density. The method is based on a reciprocity theorem for evaluating an effective potential acting on a charged ion in the core of each atom. We illustra…
▽ More
We present a method for calculating ab initio interatomic forces which scales quadratically with the size of the system and provides a physically transparent representation of the force in terms of the spatial variation of the electronic charge density. The method is based on a reciprocity theorem for evaluating an effective potential acting on a charged ion in the core of each atom. We illustrate the method with calculations for diatomic molecules.
△ Less
Submitted 22 August, 1996;
originally announced August 1996.
