-
Grain growth phenomenon during pressure-induced phase transformations at room temperature
Authors:
Valery I. Levitas,
Raghunandan Pratoori,
Dmitry Popov,
Changyong Park,
Nenad Velisavljevic
Abstract:
Significant grain growth is observed during the high-pressure phase transformations (PTs) at room temperature within an hour for various materials. However, no existing theory explains this phenomenon since nanocrystals do not grow at room temperature even over a time span of several years because of slow diffusion. Here, we suggest a multistep mechanism for the grain growth during…
▽ More
Significant grain growth is observed during the high-pressure phase transformations (PTs) at room temperature within an hour for various materials. However, no existing theory explains this phenomenon since nanocrystals do not grow at room temperature even over a time span of several years because of slow diffusion. Here, we suggest a multistep mechanism for the grain growth during $α\rightarrowω$ PT in Zr. Phase interfaces and grain boundaries (GBs) coincide and move together under the action of a combined thermodynamic driving forces. Several intermediate steps for such motion are suggested and justified kinetically. Nonhydrostatic stresses due to volume reduction in the growing $ω$ grain promote continuous growth of the existing $ω$ grain instead of a new nucleation at other GBs. In situ synchrotron Laue diffraction experiments confirm the main predictions of the theory. The suggested mechanism provides a new insight into synergistic interaction between PTs and microstructure evolution.
△ Less
Submitted 12 June, 2024;
originally announced June 2024.
-
Quantitative kinetic rules for plastic strain-induced $α$-$ω$ phase transformation in Zr under high pressure
Authors:
Achyut Dhar,
Valery I. Levitas,
K. K. Pandey,
Changyong Park,
Maddury Somayazulu,
Nenad Velisavljevic
Abstract:
Plastic strain-induced phase transformations (PTs) and chemical reactions under high pressure are broadly spread in modern technologies, friction and wear, geophysics, and astrogeology. However, because of very heterogeneous fields of plastic strain $\mathbf{E}^{p}$ and stress $\mathbfσ$ tensors and volume fraction $c$ of phases in a sample compressed in a diamond anvil cell (DAC) and impossibilit…
▽ More
Plastic strain-induced phase transformations (PTs) and chemical reactions under high pressure are broadly spread in modern technologies, friction and wear, geophysics, and astrogeology. However, because of very heterogeneous fields of plastic strain $\mathbf{E}^{p}$ and stress $\mathbfσ$ tensors and volume fraction $c$ of phases in a sample compressed in a diamond anvil cell (DAC) and impossibility of measurements of $\mathbfσ$ and $\mathbf{E}^{p}$, there are no strict kinetic equations for them. Here, we develop combined experimental-computational approaches to determine all fields in strongly plastically predeformed Zr and kinetic equation for $α$-$ω$ PT consistent with experimental data for the entire sample. Kinetic equation depends on accumulated plastic strain (instead of time) and pressure and is independent of plastic strain and deviatoric stress tensors, i.e., it can be applied for various above processes. Our results initiate kinetic studies of strain-induced PTs and provide efforts toward more comprehensive understanding of material behavior in extreme conditions.
△ Less
Submitted 23 May, 2024;
originally announced May 2024.
-
Virtual melting and cyclic transformations between amorphous Si, Si I, and Si IV in a shear band
Authors:
Hao Chen,
Valery I. Levitas
Abstract:
Virtual melting (VM) as alternative deformation and stress relaxation mechanisms under extreme load is directly validated by molecular dynamics (MD) simulations of the simple shear of single crystal Si I at a temperature 1,383 K below the melting temperature. The shear band consisting of liquid Si is formed immediately after the shear instability while stress drops to zero. A thermodynamic criteri…
▽ More
Virtual melting (VM) as alternative deformation and stress relaxation mechanisms under extreme load is directly validated by molecular dynamics (MD) simulations of the simple shear of single crystal Si I at a temperature 1,383 K below the melting temperature. The shear band consisting of liquid Si is formed immediately after the shear instability while stress drops to zero. A thermodynamic criterion for VM, which depends on the ratio of the sample to shear band widths, is derived analytically and confirmed by MD simulations. With further shear, the VM immediately transforms to a mixture of low-density amorphous a-Si, Si I, and IV, which undergo cyclic transformations a-Si to and from Si I, a-Si to Si IV, and Si I to and from Si IV with volume fraction of phases mostly between 0.2 and 0.4 and non-repeatable nanostructure evolution. Such cyclic transformations produce additional important carriers for plastic deformation through transformation strain and transformation-induced plasticity due to volume change, which may occur in shear bands in various material systems but missed in experiments and simulations.
△ Less
Submitted 15 May, 2024;
originally announced May 2024.
-
Effect of particle size on the phase transformation behavior and equation of state of Si under hydrostatic loading
Authors:
Sorb Yesudhas,
Valery I. Levitas,
Feng Lin,
K. K. Pandey,
Maddury Somayazulu
Abstract:
High-pressure synchrotron X-ray diffraction (XRD) studies have been conducted on three types of Si particles (micron, 100 nm, and 30 nm). The pressure for initiation of Si-I->Si-II phase transformation (PT) essentially increases with a reduction in particle size. For 30 nm Si particles, Si-I directly transforms to Si-XI by skip** the intermediate Si-II phase, which appears during the pressure re…
▽ More
High-pressure synchrotron X-ray diffraction (XRD) studies have been conducted on three types of Si particles (micron, 100 nm, and 30 nm). The pressure for initiation of Si-I->Si-II phase transformation (PT) essentially increases with a reduction in particle size. For 30 nm Si particles, Si-I directly transforms to Si-XI by skip** the intermediate Si-II phase, which appears during the pressure release. The evolution of phase fractions of Si particles under hydrostatic compression is studied. The equation of state (EOS) of Si-I, Si-II, Si-V, and Si-XI for all three particle sizes is determined, and the results are compared with other studies. A simple iterative procedure is suggested to extract the EOS of Si-XI and Si-II from the data for a mixture of two and three phases with different pressures in each phase. Using previous atomistic simulations, EOS for Si-II is extended to ambient pressure, which is important for plastic strain-induced phase transformations. Surprisingly, the EOS of micron and 30 nm Si are identical, but different from 100 nm particles. In particular, the Si-I phase of 100 nm Si is less compressible than that of micron and 30 nm Si. The reverse Si-V->Si-I PT is observed for the first time after complete pressure release to the ambient for 100 nm particles.
△ Less
Submitted 22 February, 2024;
originally announced February 2024.
-
In-situ study of rules of nanostructure evolution, severe plastic deformations, and friction under high pressure
Authors:
Feng Lin,
Valery I. Levitas,
Krishan K. Pandey,
Sorb Yesudhas,
Changyong Park
Abstract:
Severe plastic deformations under high pressure are used to produce nanostructured materials but were studied ex-situ. We introduce rough diamond anvils to reach maximum friction equal to yield strength in shear and perform the first in-situ study of the evolution of the pressure-dependent yield strength and nanostructural parameters for severely pre-deformed Zr. ω-Zr behaves like perfectly plasti…
▽ More
Severe plastic deformations under high pressure are used to produce nanostructured materials but were studied ex-situ. We introduce rough diamond anvils to reach maximum friction equal to yield strength in shear and perform the first in-situ study of the evolution of the pressure-dependent yield strength and nanostructural parameters for severely pre-deformed Zr. ω-Zr behaves like perfectly plastic, isotropic, and strain-path-independent. This is related to reaching steady values of the crystallite size and dislocation density, which are pressure-, strain- and strain-path-independent. However, steady states for α-Zr obtained with smooth and rough anvils are different, which causes major challenge in plasticity theory.
△ Less
Submitted 27 May, 2023; v1 submitted 22 March, 2023;
originally announced March 2023.
-
Plastic strain-induced phase transformations in silicon: drastic reduction of transformation pressures, change in transformation sequence, and particle size effect
Authors:
Sorb Yesudhas,
Valery I. Levitas,
Feng Lin,
K. K. Pandey,
Jesse Smith
Abstract:
Pressure-induced phase transformations (PTs) between numerous phases of Si, the most important electronic material, have been studied for decades. This is not the case for plastic strain-induced PTs. Here, we revealed in-situ various unexpected plastic strain-induced PT phenomena. Thus, for 100 nm Si, strain-induced PT Si-I to Si-II (and Si-I to Si-III) initiates at 0.4 GPa (0.6 GPa) versus 16.2 G…
▽ More
Pressure-induced phase transformations (PTs) between numerous phases of Si, the most important electronic material, have been studied for decades. This is not the case for plastic strain-induced PTs. Here, we revealed in-situ various unexpected plastic strain-induced PT phenomena. Thus, for 100 nm Si, strain-induced PT Si-I to Si-II (and Si-I to Si-III) initiates at 0.4 GPa (0.6 GPa) versus 16.2 GPa ($\infty$, since it does not occur) under hydrostatic conditions; for 30 nm Si, it is 6.1 GPa versus $\infty$. The predicted theoretical correlation between the direct and inverse Hall-Petch effect of the grain size on the yield strength and the minimum pressure for strain-induced PT is confirmed for the appearance of Si-II. Retaining Si-II at ambient pressure and obtaining reverse Si-II to Si-I PT are achieved, demonstrating the possibilities of manipulating different synthetic paths.
△ Less
Submitted 8 March, 2023;
originally announced March 2023.
-
Simulations of multivariant Si I to Si II phase transformation in polycrystalline silicon with finite-strain scale-free phase-field approach
Authors:
Hamed Babaei,
Raghunandan Pratoori,
Valery I. Levitas
Abstract:
Scale-free phase-field approach (PFA) at large strains and corresponding finite element method (FEM) simulations for multivariant martensitic phase transformation (PT) from cubic Si I to tetragonal Si II in a polycrystalline aggregate are presented. Important features of the model are large and very anisotropic transformation strain tensor $\varepsilon_{t}=\{0.1753;0.1753; -0.447\}$ and stress-ten…
▽ More
Scale-free phase-field approach (PFA) at large strains and corresponding finite element method (FEM) simulations for multivariant martensitic phase transformation (PT) from cubic Si I to tetragonal Si II in a polycrystalline aggregate are presented. Important features of the model are large and very anisotropic transformation strain tensor $\varepsilon_{t}=\{0.1753;0.1753; -0.447\}$ and stress-tensor dependent athermal dissipative threshold for PT, which produce essential challenges for computations. 3D polycrystals with 55 and 910 stochastically oriented grains are subjected to uniaxial strain- and stress-controlled loadings under periodic boundary conditions and zero averaged lateral strains. Coupled evolution of discrete martensitic microstructure, volume fractions of martensitic variants and Si II, stress and transformation strain tensors, and texture are presented and analyzed. Macroscopic variables effectively representing multivariant transformational behavior are introduced. Macroscopic stress-strain and transformational behavior for 55 and 910 grains are close (less than 10% difference). This allows the determination of macroscopic constitutive equations by treating aggregate with a small number of grains. Large transformation strains and grain boundaries lead to huge internal stresses of tens GPa, which affect microstructure evolution and macroscopic behavior. In contrast to a single crystal, the local mechanical instabilities due to PT and negative local tangent modulus are stabilized at the macroscale by arresting/slowing the growth of Si II regions by the grain boundaries and generating the internal back stresses. This leads to increasing stress during PT. The developed methodology can be used for studying similar PTs with large transformation strains and for further development by including plastic strain and strain-induced PTs.
△ Less
Submitted 12 February, 2023;
originally announced February 2023.
-
Effect of initial microstructure on its evolution and $α\rightarrow ω$ phase transition in Zr under hydrostatic loading
Authors:
K. K. Pandey,
Valery I. Levitas,
Changyong Park,
Guoyin Shen
Abstract:
The first study of the effect of the initial microstructure on its evolution under hydrostatic compression before, during, and after the irreversible $α\rightarrowω$ phase transformation and during pressure release in Zr using in situ x-ray diffraction is presented. Two samples were studied: one is plastically pre-deformed Zr with saturated hardness and the other is annealed. Phase transformation…
▽ More
The first study of the effect of the initial microstructure on its evolution under hydrostatic compression before, during, and after the irreversible $α\rightarrowω$ phase transformation and during pressure release in Zr using in situ x-ray diffraction is presented. Two samples were studied: one is plastically pre-deformed Zr with saturated hardness and the other is annealed. Phase transformation $α\rightarrowω$ initiates at lower pressure for the pre-deformed sample but above volume fraction of $ω$ Zr $c= 0.7$, a larger volume fraction is observed for the annealed sample. This implies that the general theory based on the proportionality between the athermal resistance to the transformation and the yield strength must be essentially advanced. The crystal domain size significantly reduces, and microstrain and dislocation density increase during loading for both $α$ and $ω$ phases in their single-phase regions. For the $α$ phase, domain sizes are much smaller for prestrained Zr, while microstrain and dislocation densities are much higher. Despite the generally accepted concept that hydrostatic pressure does not cause plastic straining, it does and is estimated. The microstructure is not inherited during phase transformation. The significant evolution of the microstructure and its effect on phase transformation demonstrates that their postmortem evaluation does not represent the actual conditions during loading. A simple model for the initiation of the phase transformation involving microstrain is suggested. The results suggest that an extended experimental basis is required for the predictive models for the combined pressure-induced phase transformations and microstructure evolutions.
△ Less
Submitted 22 February, 2024; v1 submitted 25 January, 2023;
originally announced January 2023.
-
Tensorial stress-plastic strain fields in $α$-$ω$ Zr mixture, transformation kinetics, and friction in diamond anvil cell
Authors:
V. I. Levitas,
Achyut Dhar,
K. K. Pandey
Abstract:
Various phenomena (phase transformations, chemical reactions, and friction) under high pressures in diamond anvil cell are strongly affected by fields of all components of stress and plastic strain tensors. However, they could not be measured. Even measured pressure distribution contains significant error. Here, we suggest coupled experimental-analytical-computational approaches utilizing synchrot…
▽ More
Various phenomena (phase transformations, chemical reactions, and friction) under high pressures in diamond anvil cell are strongly affected by fields of all components of stress and plastic strain tensors. However, they could not be measured. Even measured pressure distribution contains significant error. Here, we suggest coupled experimental-analytical-computational approaches utilizing synchrotron X-ray diffraction, to solve an inverse problem and find all these fields and friction rules before, during, and after $α$-$ω$ phase transformation in strongly plastically predeformed Zr. Due to advanced characterization, the minimum pressure for the strain-induced $α$-$ω$ phase transformation is changed from 1.36 to 2.7 GPa. It is independent of the compression-shear path. The theoretically predicted plastic strain-controlled kinetic equation is verified and quantified. Obtained results open opportunities for develo** quantitative high-pressure/stress science, including mechanochemistry, material synthesis, and tribology.
△ Less
Submitted 25 December, 2022;
originally announced December 2022.
-
Effect of a Micro-scale Dislocation Pileup on the Atomic-Scale Multi-variant Phase Transformation and Twinning
Authors:
Yipeng Peng,
Rigelesaiyin Ji,
Thanh Phan,
Laurent Capolungo,
Valery I. Levitas,
Liming Xiong
Abstract:
In this paper, we perform concurrent atomistic-continuum (CAC) simulations to (i) characterize the internal stress induced by the microscale dislocation pileup at an atomically structured interface; (ii) decompose this stress into two parts, one of which is from the dislocations behind the pileup tip according to the Eshelby model and the other is from the dislocations at the pileup tip according…
▽ More
In this paper, we perform concurrent atomistic-continuum (CAC) simulations to (i) characterize the internal stress induced by the microscale dislocation pileup at an atomically structured interface; (ii) decompose this stress into two parts, one of which is from the dislocations behind the pileup tip according to the Eshelby model and the other is from the dislocations at the pileup tip according to a super-dislocation model; and (iii) assess how such internal stresses contribute to the atomic-scale phase transformations (PTs), reverse PTs, and twinning. The main novelty of this work is to unify the atomistic description of the interface and the coarse-grained (CG) description of the lagging dislocations away from the interface within one single framework. Our major findings are: (a) the interface dynamically responds to a pileup by forming steps/ledges, the height of which is proportional to the number of dislocations arriving at the interface; (b) when the pre-sheared sample is compressed, a direct square-to-hexagonal PT occurs ahead of the pileup tip and eventually grows into a wedge shape; (c) upon a further increase of the loading, part of the newly formed hexagonal phase transforms back to the square phase. The square product phase resulting from this reverse PT forms a twin with respect to the initial square phase. All phase boundaries (PBs) and twin boundaries (TBs) are stationary and correspond to zero thermodynamic Eshelby driving forces; and (d) the stress intensity induced by a pileup consisting of 16 dislocations reduces the stress required for initiating a PT by a factor of 5.5, comparing with that in the sample containing no dislocations. This work is the first characterization of the behavior of PTs/twinning resulting from the reaction between a microscale dislocation slip and an atomically structured interface.
△ Less
Submitted 9 August, 2022; v1 submitted 6 August, 2022;
originally announced August 2022.
-
Athermal resistance to phase interface motion due to precipitates: A phase field study
Authors:
Mahdi Javanbakht,
Valery I. Levitas
Abstract:
Athermal resistance to the motion of a phase interface due to a precipitate is investigated. The coupled phase field and elasticity equations are solved for the phase transformation (PT). The volumetric misfit strain due to the precipitate is included using the error and rectangular functions. Due to the presence of precipitates, the critical thermal driving forces remarkably differ between the di…
▽ More
Athermal resistance to the motion of a phase interface due to a precipitate is investigated. The coupled phase field and elasticity equations are solved for the phase transformation (PT). The volumetric misfit strain due to the precipitate is included using the error and rectangular functions. Due to the presence of precipitates, the critical thermal driving forces remarkably differ between the direct and reverse PTs, resulting in a hysteresis behavior. For the precipitate radius small compared to the interface width, the misfit strain does not practically show any effect on the critical thermal driving force. Also, the critical thermal driving force value nonlinearly increases vs. the precipitate concentration for both the direct and reverse PTs. Change in the precipitate surface energy significantly changes the PT morphology and the critical thermal driving forces. The critical thermal driving force shows dependence on the misfit strain for large precipitate sizes compared to the interface width. For both the constant surface energy (CSE) and variable surface energy (VSE) boundary conditions (BCs) at the precipitate surface, the critical thermal driving force linearly increases vs. the misfit strain coefficient for the direct PT while it is almost independent of it for the reverse PT. For larger precipitates, the critical thermal driving force nonlinearly increases vs. the precipitate concentration for the direct PT. For the reverse PT, its value for the CSE BCs linearly increases vs. the precipitate concentration while it is independent of the precipitate concentration for the VSE BCs. Also, for any concentration, the VSE BCs result in higher thermal critical driving forces, a smaller hysteresis range, and a larger transformation rate. The critical microstructure and thermal driving forces are validated using the thermodynamic phase equilibrium condition for stationary interfaces.
△ Less
Submitted 26 June, 2022;
originally announced June 2022.
-
A multiphase phase-field study of three-dimensional martensitic twinned microstructures at large strains
Authors:
Anup Basak,
Valery I. Levitas
Abstract:
A thermodynamically consistent multiphase phase-field approach for stress and temperature-induced martensitic phase transformation at the nanoscale and under large strains is developed. A total of N independent order parameters are considered for materials with N variants, where one of the order parameters describes A <-> M transformations and the remaining N-1 independent order parameters describ…
▽ More
A thermodynamically consistent multiphase phase-field approach for stress and temperature-induced martensitic phase transformation at the nanoscale and under large strains is developed. A total of N independent order parameters are considered for materials with N variants, where one of the order parameters describes A <-> M transformations and the remaining N-1 independent order parameters describe the transformations between the variants. A non-contradictory gradient energy is used within the free energy of the system to account for the energies of the interfaces. In addition, a non-contradictory kinetic relationships for the rate of the order parameters versus thermodynamic driving forces is suggested. As a result, a system of consistent coupled Ginzburg-Landau equations for the order parameters are derived. The crystallographic solution for twins within twins is presented for the cubic to tetragonal transformations. A 3D complex twins within twins microstructure is simulated using the developed phase-field approach and a large-strain-based nonlinear finite element method. A comparative study between the crystallographic solution and the simulation result is presented.
△ Less
Submitted 25 June, 2022;
originally announced June 2022.
-
Resolving puzzles of the phase-transformation-based mechanism of the deep-focus earthquake
Authors:
Valery I. Levitas
Abstract:
Deep-focus earthquakes that occur at 350-660 km, where pressures 12-23 GPa and temperature 1800-2000 K, are generally assumed to be caused by olivine-spinel phase transformation (PT). However, there are many existing puzzles: (a) What are the mechanisms for jump from geological 10^-17-10^-15 1/s to seismic 10-10^3 1/s strain rates? Is it possible without PT? (b) How does metastable olivine, which…
▽ More
Deep-focus earthquakes that occur at 350-660 km, where pressures 12-23 GPa and temperature 1800-2000 K, are generally assumed to be caused by olivine-spinel phase transformation (PT). However, there are many existing puzzles: (a) What are the mechanisms for jump from geological 10^-17-10^-15 1/s to seismic 10-10^3 1/s strain rates? Is it possible without PT? (b) How does metastable olivine, which does not completely transform to spinel at high temperature and deeply in the region of stability of spinel for over the million years, suddenly transforms during seconds and generates seismic strain rates 10-10^3 1/s? (c) How to connect deviatorically dominated seismic signals with volume-change dominated PT strain during PT? Here we introduce a combination of several novel concepts that allow us to resolve the above puzzles quantitatively. We treat the PT in olivine like plastic strain-induced (instead of pressure/stress-induced) and find an analytical 3D solution for coupled deformation-PT-heating processes in a shear band. This solution predicts conditions for severe (singular) transformation-induced plasticity (TRIP) and self-blown-up TRIP-PT-heating process due to positive thermomechanochemical feedback between TRIP and strain-induced PT. In nature, this process leads to temperature in a band exceeding the unstable stationary temperature, above which the self-blown-up shear-heating process in the shear band occurs after finishing the PT. Without PT and TRIP, significant temperature and strain rate increase is impossible. Due to the much smaller band thickness in the laboratory, heating within the band does not occur, and plastic flow after the PT is very limited. Our findings change the main concepts in studying the initiation of the deep-focus earthquakes and PTs during plastic flow in geophysics in general.
△ Less
Submitted 20 October, 2021;
originally announced October 2021.
-
Pseudoelastic deformation in Mo-based refractory multi-principal element alloys
Authors:
Aayush Sharma,
Prashant Singh,
Tanner Kirk,
Velary I. Levitas,
Peter K. Liaw,
Ganesh Balasubramanian,
Raymundo Arroyave,
Duane D Johnson
Abstract:
Phase diagrams supported by density functional theory methods can be crucial for designing high-entropy alloys that are subset of multi-principal$-$element alloys. We present phase and property analysis of quinary (MoW)$_{x}$Zr$_{y}$(TaTi)$_{1-x-y}$ refractory high-entropy alloys from combined Calculation of Phase Diagram (CALPHAD) and density-functional theory results, supplemented by molecular d…
▽ More
Phase diagrams supported by density functional theory methods can be crucial for designing high-entropy alloys that are subset of multi-principal$-$element alloys. We present phase and property analysis of quinary (MoW)$_{x}$Zr$_{y}$(TaTi)$_{1-x-y}$ refractory high-entropy alloys from combined Calculation of Phase Diagram (CALPHAD) and density-functional theory results, supplemented by molecular dynamics simulations. Both CALPHAD and density-functional theory analysis of phase stability indicates a Mo-W-rich region of this quinary has a stable single-phase body-centered-cubic structure. We report first quinary composition from Mo$-$W$-$Ta$-$Ti$-$Zr family of alloy with pseudo-elastic behavior, i.e., hysteresis in stress$-$strain. Our analysis shows that only Mo$-$W$-$rich compositions of Mo$-$W$-$Ta$-$Ti$-$Zr, i.e., Mo$+$W$\ge$ 85 at.%, show reproducible hysteresis in stress-strain responsible for pseudo-elastic behavior. The (MoW)$_{85}$Zr$_{7.5}$(TaTi)$_{7.5}$ was down-selected based on temperature-dependent phase diagram analysis and molecular dynamics simulations predicted elastic behavior that reveals twinning assisted pseudoelastic behavior. While mostly unexplored in body-centered-cubic crystals, twinning is a fundamental deformation mechanism that competes against dislocation slip in crystalline solids. This alloy shows identical cyclic deformation characteristics during uniaxial $\lt$100$\gt$ loading, i.e., the pseudoelasticity is isotropic in loading direction. Additionally, a temperature increase from 77 to 1500 K enhances the elastic strain recovery in load-unload cycles, offering possibly control to tune the pseudoelastic behavior.
△ Less
Submitted 5 September, 2021;
originally announced September 2021.
-
Review on phase transformations, fracture, chemical reactions, and other structural changes in inelastic materials
Authors:
Valery I. Levitas
Abstract:
Review of selected fundamental topics on the interaction between phase transformations, fracture, and other structural changes in inelastic materials is presented. It mostly focuses on the concepts developed in the author's group over last three decades and numerous papers that affected us. It includes a general thermodynamic and kinetic theories with sharp interfaces and within phase field approa…
▽ More
Review of selected fundamental topics on the interaction between phase transformations, fracture, and other structural changes in inelastic materials is presented. It mostly focuses on the concepts developed in the author's group over last three decades and numerous papers that affected us. It includes a general thermodynamic and kinetic theories with sharp interfaces and within phase field approach. Numerous analytical (even at large strains) and numerical solutions illustrate the main features of the developed theories and their application to the real phenomena. Coherent, semicoherent, and noncoherent interfaces, as well as interfaces with decohesion and with intermediate liquid (disordered) phase are discussed. Importance of the surface- and scale-induced phenomena on interaction between phase transformation with fracture and dislocations as well as inheritance of dislocations and plastic strains is demonstrated. Some nontrivial phenomena, like solid-solid phase transformations via intermediate (virtual) melt, virtual melting as a new mechanism of plastic deformation and stress relaxation under high strain rate loading, and phase transformations and chemical reactions induced by plastic shear under high pressure are discussed and modeled.
△ Less
Submitted 23 August, 2021; v1 submitted 23 May, 2021;
originally announced May 2021.
-
Nonlinear elasticity of prestressed single crystals at high pressure and various elastic moduli
Authors:
Valery I. Levitas
Abstract:
A general nonlinear theory for the elasticity of pre-stressed single crystals is presented. Various types of elastic moduli are defined, their importance is determined, and relationships between them are presented. In particular, B moduli are present in the relationship between the Jaumann objective time derivative of the Cauchy stress and deformation rate and are broadly used in computational alg…
▽ More
A general nonlinear theory for the elasticity of pre-stressed single crystals is presented. Various types of elastic moduli are defined, their importance is determined, and relationships between them are presented. In particular, B moduli are present in the relationship between the Jaumann objective time derivative of the Cauchy stress and deformation rate and are broadly used in computational algorithms in various finite-element codes. Possible applications to simplified linear solutions for complex nonlinear elasticity problems are outlined and illustrated for a superdislocation. The effect of finite rotations is fully taken into account and analyzed. Different types of the bulk and shear moduli under different constraints are defined and connected to the effective properties of polycrystalline aggregates. Expressions for elastic energy and stress-strain relationships for small distortions with respect to a pre-stressed configuration are derived in detail. Under initial hydrostatic load, general consistency conditions for elastic moduli and compliances are derived that follow from the existence of the generalized tensorial equation of state under hydrostatic loading obtained from single crystal or polycrystal. It is shown that B moduli can be found from the expression for the Gibbs energy. However, higher-order elastic moduli defined from the Gibbs energy do not have any meaning since they do not directly participate in any known equations, like stress-strain relationships and wave propagation equation. The deviatoric projection of B can also be found from the expression for the elastic energy for isochoric small strain increments, and the missing components of B can be found from the consistency conditions. Numerous inconsistencies and errors in the known works are analyzed.
△ Less
Submitted 10 December, 2021; v1 submitted 22 May, 2021;
originally announced May 2021.
-
Phase field theory for fracture at large strains including surface stresses
Authors:
Hossein Jafarzadeh,
Gholam Hossein Farrahi,
Valery I. Levitas,
Mahdi Javanbakht
Abstract:
Phase field theory for fracture is developed at large strains with an emphasis on a correct introduction of surface stresses. This is achieved by multiplying the cohesion and gradient energies by the local ratio of the crack surface areas in the deformed and undeformed configurations and with the gradient energy in terms of the gradient of the order parameter in the reference configuration. This r…
▽ More
Phase field theory for fracture is developed at large strains with an emphasis on a correct introduction of surface stresses. This is achieved by multiplying the cohesion and gradient energies by the local ratio of the crack surface areas in the deformed and undeformed configurations and with the gradient energy in terms of the gradient of the order parameter in the reference configuration. This results in an expression for the surface stresses which is consistent with the sharp surface approach. Namely, the structural part of the Cauchy surface stress represents an isotropic biaxial tension, with the magnitude of a force per unit length equal to the surface energy. The surface stresses are a result of the geometric nonlinearities, even when strains are infinitesimal. They make multiple contributions to the Ginzburg-Landau equation for damage evolution, both in the deformed and undeformed configurations. Important connections between material parameters are obtained using an analytical solution for two separating surfaces, as well as an analysis of the stress-strain curves for homogeneous tension for different degradation and interpolation functions. A complete system of equations is presented in the undeformed and deformed configurations. All the phase field parameters are obtained utilizing the existing first principle simulations for the uniaxial tension of Si crystal in the [100] and [111] directions.
△ Less
Submitted 26 November, 2020;
originally announced November 2020.
-
Fifth-degree elastic potential for predictive stress-strain relations and elastic instabilities under large strain and complex loading in Si
Authors:
Hao Chen,
Nikolai A. Zarkevich,
Valery I. Levitas,
Duane D. Johson,
Xiancheng Zhang
Abstract:
Materials under complex loading develop large strains and often transition via an elastic instability, as observed in both simple and complex systems. Here, we present Si I under large strain in terms of Lagrangian strain by an $5^{th}$-order elastic potential found by minimizing error relative to density functional theory (DFT) results. The Cauchy stress-Lagrangian strain curves for arbitrary com…
▽ More
Materials under complex loading develop large strains and often transition via an elastic instability, as observed in both simple and complex systems. Here, we present Si I under large strain in terms of Lagrangian strain by an $5^{th}$-order elastic potential found by minimizing error relative to density functional theory (DFT) results. The Cauchy stress-Lagrangian strain curves for arbitrary complex loadings are in excellent correspondence with DFT results, including elastic instability driving Si I$\rightarrow$II phase transformation (PT) and the shear instabilities. PT conditions for Si I$\rightarrow$II under action of cubic axial stresses are linear in Cauchy stresses in agreement with DFT predictions. Such elastic potential permits study of elastic instabilities and orientational dependence leading to different PTs, slip, twinning, or fracture, providing a fundamental basis for continuum simulations of crystal behavior under extreme loading.
△ Less
Submitted 14 February, 2020;
originally announced February 2020.
-
In situ quantitative study of plastic strain-induced phase transformations under high pressure: Example for ultra-pure Zr
Authors:
K. K. Pandey,
Valery I. Levitas
Abstract:
The first in situ quantitative synchrotron X-ray diffraction (XRD) study of plastic strain-induced phase transformation (PT) has been performed on $α-ω$ PT in ultra-pure, strongly plastically predeformed Zr as an example, under different compression-shear pathways in rotational diamond anvil cell (RDAC). Radial distributions of pressure in each phase and in the mixture, and concentration of $ω$-Zr…
▽ More
The first in situ quantitative synchrotron X-ray diffraction (XRD) study of plastic strain-induced phase transformation (PT) has been performed on $α-ω$ PT in ultra-pure, strongly plastically predeformed Zr as an example, under different compression-shear pathways in rotational diamond anvil cell (RDAC). Radial distributions of pressure in each phase and in the mixture, and concentration of $ω$-Zr, all averaged over the sample thickness, as well as thickness profile were measured. The minimum pressure for the strain-induced $α-ω$ PT, $p^d_{\varepsilon}$=1.2 GPa, is smaller than under hydrostatic loading by a factor of 4.5 and smaller than the phase equilibrium pressure by a factor of 3; it is independent of the compression-shear straining path. The theoretically predicted plastic strain-controlled kinetic equation was verified and quantified; it is independent of the pressure-plastic strain loading path and plastic deformation at pressures below $p^d_{\varepsilon}$. Thus, strain-induced PTs under compression in DAC and torsion in RDAC do not fundamentally differ. The yield strength of both phases is estimated using hardness and x-ray peak broadening; the yield strength in shear is not reached by the contact friction stress and cannot be evaluated using the pressure gradient. Obtained results open a new opportunity for quantitative study of strain-induced PTs and reactions with applications to material synthesis and processing, mechanochemistry, and geophysics.
△ Less
Submitted 11 February, 2020; v1 submitted 6 December, 2019;
originally announced December 2019.
-
Fatigue-resistant high-performance elastocaloric materials via additive manufacturing
Authors:
Huilong Hou,
Emrah Simsek,
Tao Ma,
Nathan S. Johnson,
Suxin Qian,
Cheikh Cisse,
Drew Stasak,
Naila Al Hasan,
Lin Zhou,
Yunho Hwang,
Reinhard Radermacher,
Valery I. Levitas,
Matthew J. Kramer,
Mohsen Asle Zaeem,
Aaron P. Stebner,
Ryan T. Ott,
Jun Cui,
Ichiro Takeuchi
Abstract:
Elastocaloric cooling, which exploits the latent heat released and absorbed as stress-induced phase transformations are reversibly cycled in shape memory alloys, has recently emerged as a frontrunner in non-vapor-compression cooling technologies. The intrinsically high thermodynamic efficiency of elastocaloric materials is limited only by work hysteresis. Here, we report on creating high-performan…
▽ More
Elastocaloric cooling, which exploits the latent heat released and absorbed as stress-induced phase transformations are reversibly cycled in shape memory alloys, has recently emerged as a frontrunner in non-vapor-compression cooling technologies. The intrinsically high thermodynamic efficiency of elastocaloric materials is limited only by work hysteresis. Here, we report on creating high-performance low-hysteresis elastocaloric cooling materials via additive manufacturing of Titanium-Nickel (Ti-Ni) alloys. Contrary to established knowledge of the physical metallurgy of Ti-Ni alloys, intermetallic phases are found to be beneficial to elastocaloric performances when they are combined with the binary Ti-Ni compound in nanocomposite configurations. The resulting microstructure gives rise to quasi-linear stress-strain behaviors with extremely small hysteresis, leading to enhancement in the materials efficiency by a factor of five. Furthermore, despite being composed of more than 50% intermetallic phases, the reversible, repeatable elastocaloric performance of this material is shown to be stable over one million cycles. This result opens the door for direct implementation of additive manufacturing to elastocaloric cooling systems where versatile design strategy enables both topology optimization of heat exchangers as well as unique microstructural control of metallic refrigerants.
△ Less
Submitted 21 August, 2019;
originally announced August 2019.
-
Imaging stress and magnetism at high pressures using a nanoscale quantum sensor
Authors:
S. Hsieh,
P. Bhattacharyya,
C. Zu,
T. Mittiga,
T. J. Smart,
F. Machado,
B. Kobrin,
T. O. Höhn,
N. Z. Rui,
M. Kamrani,
S. Chatterjee,
S. Choi,
M. Zaletel,
V. V. Struzhkin,
J. E. Moore,
V. I. Levitas,
R. Jeanloz,
N. Y. Yao
Abstract:
Pressure alters the physical, chemical and electronic properties of matter. The development of the diamond anvil cell (DAC) enables tabletop experiments to investigate a diverse landscape of high-pressure phenomena ranging from the properties of planetary interiors to transitions between quantum mechanical phases. In this work, we introduce and utilize a novel nanoscale sensing platform, which int…
▽ More
Pressure alters the physical, chemical and electronic properties of matter. The development of the diamond anvil cell (DAC) enables tabletop experiments to investigate a diverse landscape of high-pressure phenomena ranging from the properties of planetary interiors to transitions between quantum mechanical phases. In this work, we introduce and utilize a novel nanoscale sensing platform, which integrates nitrogen-vacancy (NV) color centers directly into the culet (tip) of diamond anvils. We demonstrate the versatility of this platform by performing diffraction-limited imaging (~600 nm) of both stress fields and magnetism, up to pressures ~30 GPa and for temperatures ranging from 25-340 K. For the former, we quantify all six (normal and shear) stress components with accuracy $<0.01$ GPa, offering unique new capabilities for characterizing the strength and effective viscosity of solids and fluids under pressure. For the latter, we demonstrate vector magnetic field imaging with dipole accuracy $<10^{-11}$ emu, enabling us to measure the pressure-driven $α\leftrightarrowε$ phase transition in iron as well as the complex pressure-temperature phase diagram of gadolinium. In addition to DC vector magnetometry, we highlight a complementary NV-sensing modality using T1 noise spectroscopy; crucially, this demonstrates our ability to characterize phase transitions even in the absence of static magnetic signatures. By integrating an atomic-scale sensor directly into DACs, our platform enables the in situ imaging of elastic, electric and magnetic phenomena at high pressures.
△ Less
Submitted 20 December, 2018;
originally announced December 2018.
-
Twinning-induced pseudoelastic behavior in (MoW)$_{85}$(TaTi)$_{7.5}$Zr$_{7.5}$
Authors:
Aayush Sharma,
Valery I. Levitas,
Prashant Singh,
Anup Basak,
Ganesh Balasubramanian,
Duane D. Johnson
Abstract:
We provide a critical atomistic evidence of pseudoelastic behavior in complex solid-solution BCC Mo-W-Ta-Ti-Zr alloy. Prior to this work, only limited single-crystal BCC solids of pure metals and quaternary alloys have shown pseudoelastic behavior at low temperatures and high strain rates. The deformation mechanisms investigated using classical molecular simulations under tensile-compressive loadi…
▽ More
We provide a critical atomistic evidence of pseudoelastic behavior in complex solid-solution BCC Mo-W-Ta-Ti-Zr alloy. Prior to this work, only limited single-crystal BCC solids of pure metals and quaternary alloys have shown pseudoelastic behavior at low temperatures and high strain rates. The deformation mechanisms investigated using classical molecular simulations under tensile-compressive loading reveal temperature-dependent pseudoelastic behavior aided by twinning during the loading-unloading cycle. The pseudoelasticity is found to be independent of loading directions with identical cyclic deformation characteristics during uniaxial loading. Additionally, temperature variation from 77 to 1500 K enhances the elastic strain recovery in the alloy.
△ Less
Submitted 18 September, 2018;
originally announced September 2018.
-
Deformation, lattice instability, and metallization during solid-solid structural transformations under general applied stress tensor: example of Si I -> Si II
Authors:
Nikolai A. Zarkevich,
Hao Chen,
Valery I. Levitas,
Duane D. Johnson
Abstract:
Density functional theory (DFT) was employed to study the stress-strain behavior, elastic instabilities, and metallization during a solid-solid phase transformation (PT) between semiconducting Si I (cubic A4) and metallic Si II (tetragonal A5 structure) when subjected to a general stress tensor. With normal stresses ($σ_1$, $σ_2$, $σ_3$) acting along $\left<110 \right>$, $\left<1\bar{1}0 \right>$,…
▽ More
Density functional theory (DFT) was employed to study the stress-strain behavior, elastic instabilities, and metallization during a solid-solid phase transformation (PT) between semiconducting Si I (cubic A4) and metallic Si II (tetragonal A5 structure) when subjected to a general stress tensor. With normal stresses ($σ_1$, $σ_2$, $σ_3$) acting along $\left<110 \right>$, $\left<1\bar{1}0 \right>$, and $\left<001\right>$, respectively, dictating the simulation cell, we determine combinations of 6 independent stresses that drive a lattice instability for the Si I$\rightarrow$Si II PT, and a semiconductor-metal electronic transition. Metallization precedes the structural PT, hence, a stressed Si I can be a metal. Surprisingly, a stress-free Si II is metastable in DFT. Notably, the PT for hydrostatic pressures is at 75.81 GPa, while under uniaxial stress it is 11.03 GPa (or 3.68 GPa mean pressure). Our key result: The Si I -> Si II PT is described by a critical value of the modified transformation work, as found with a phase-field method, and the PT criterion has only two parameters for a general applied stress. More generally, our findings are crucial for revealing novel (and more economic) material synthesis routes for new or known high-pressure phases under controlled and predictable non-hydrostatic loading and plastic deformation.
△ Less
Submitted 31 May, 2018;
originally announced June 2018.
-
A study of a hamiltonian model for martensitic phase transformations including microkinetic energy
Authors:
F. Theil,
V. I. Levitas
Abstract:
How can a system in a macroscopically stable state explore energetically more favorable states, which are far away from the current equilibrium state? Based on continuum mechanical considerations we derive a Boussinesq-type equation which models the dynamics of martensitic phase transformations. The solutions of the system, which we refer to as microkinetically regularized wave equation exhibit…
▽ More
How can a system in a macroscopically stable state explore energetically more favorable states, which are far away from the current equilibrium state? Based on continuum mechanical considerations we derive a Boussinesq-type equation which models the dynamics of martensitic phase transformations. The solutions of the system, which we refer to as microkinetically regularized wave equation exhibit strong oscillations after short times, thermalization can be confirmed. That means that macroscopic fluctuations of the solutions decay at the benefit of microscopic fluctuations. First analytical and numerical results on the propagation of phase boundaries and thermalization effects are presented. Despite the fact that model is conservative, it exhibits the hysteretic behavior. Such a behavior is usually interpreted in macroscopic models in terms of dissipative threshold which the driving force has to overcome to ensure that the phase transformation proceeds. The threshold value depends on the amount of the transformed phase as it is observed in known experiments. Secondly we investigate the dynamics of oscillatory solutions. We present a formalism based on Young measures, which allows us to describe the effective dynamics of rapidly fluctuating solutions. The new method enables us to derive a numerical scheme for oscillatory solutions based on particle methods.
△ Less
Submitted 19 November, 1998;
originally announced November 1998.
