-
The internal alignment and validation of a powered ADC for SOXS
Authors:
F. Battaini,
K. Radhakrishnan,
R. Claudi,
M. Munari,
R. Z. Sànchez,
M. Aliverti,
M. Colapietro,
D. Ricci,
L. Lessio,
M. Dima,
F. Biondi,
S. Campana,
P. Schipani,
A. Baruffolo,
S. Ben-Ami,
G. Capasso,
R. Cosentino,
F. D'Alessio,
P. D'Avanzo,
O. Hershkod,
H. Kuncarayakti,
M. Landoni,
G. Pignata,
A. Rubin,
S. Scuderi
, et al. (25 additional authors not shown)
Abstract:
The Son Of X-Shooter (SOXS) is a two-channel spectrograph along with imaging capabilities, characterized by a wide spectral coverage (350nm to 2000nm), designed for the NTT telescope at the La Silla Observatory. Its main scientific goal is the spectroscopic follow-up of transients and variable objects. The UV-VIS arm, of the Common Path sub-system, is characterized by the presence of a powered Atm…
▽ More
The Son Of X-Shooter (SOXS) is a two-channel spectrograph along with imaging capabilities, characterized by a wide spectral coverage (350nm to 2000nm), designed for the NTT telescope at the La Silla Observatory. Its main scientific goal is the spectroscopic follow-up of transients and variable objects. The UV-VIS arm, of the Common Path sub-system, is characterized by the presence of a powered Atmospheric Dispersion Corrector composed (ADC) by two counter-rotating quadruplets, two prisms, and two lenses each. The presence of powered optics in both the optical groups represents an additional challenge in the alignment procedures. We present the characteristics of the ADC, the analysis after receiving the optics from the manufacturer, the emerging issues, the alignment strategies we followed, and the final results of the ADC in dispersion and optical quality.
△ Less
Submitted 15 September, 2022;
originally announced September 2022.
-
From Assembly to the Complete Integration and Verification of the SOXS Common Path
Authors:
Kalyan Kumar Radhakrishnan Santhakumari,
Federico Battaini,
Riccardo Claudi,
Alessandra Slemer,
F. Biondi,
M. Munari,
R. Z. Sanchez,
M. Aliverti,
L. Oggioni,
M. Colapietro,
D. Ricci,
L. Lessio,
M. Dima,
L. Marafatto,
J. Farinato,
S. Campana,
P. Schipani,
S. DOrsi,
B. Salasnich,
A. Baruffolo,
S. Ben Ami,
G. Capasso,
R. Cosentino,
F. D Alessio,
P. DAvanzo
, et al. (28 additional authors not shown)
Abstract:
The Son Of X-Shooter (SOXS) is a single object spectrograph offering simultaneous spectral coverage in UV-VIS (350-850 nm) and NIR (800-2000 nm) wavelength regimes with an average of R close to 4500 for a 1 slit. SOXS also has imaging capabilities in the visible wavelength regime. It is designed and optimized to observe all kinds of transients and variable sources. The final destination of SOXS is…
▽ More
The Son Of X-Shooter (SOXS) is a single object spectrograph offering simultaneous spectral coverage in UV-VIS (350-850 nm) and NIR (800-2000 nm) wavelength regimes with an average of R close to 4500 for a 1 slit. SOXS also has imaging capabilities in the visible wavelength regime. It is designed and optimized to observe all kinds of transients and variable sources. The final destination of SOXS is the Nasmyth platform of the ESO NTT at La Silla, Chile. The SOXS consortium has a relatively large geographic spread, and therefore the Assembly Integration and Verification (AIV) of this medium-class instrument follows a modular approach. Each of the five main sub-systems of SOXS, namely the Common Path, the Calibration Unit, the Acquisition Camera, the UV-VIS Spectrograph, and the NIR Spectrograph, are undergoing (or undergone) internal alignment and testing in the respective consortium institutes. INAF-Osservatorio Astronomico di Padova delivers the Common Path sub-system, the backbone of the entire instrument. We report the Common Path internal alignment starting from the assembly of the individual components to the final testing of the optical quality, and the efficiency of the complete sub-system.
△ Less
Submitted 15 September, 2022;
originally announced September 2022.
-
Progress on the SOXS transients chaser for the ESO-NTT
Authors:
P. Schipani,
S. Campana,
R. Claudi,
M. Aliverti,
A. Baruffolo,
S. Ben-Ami,
G. Capasso,
R. Cosentino,
F. D'Alessio,
P. D'Avanzo,
O. Hershko,
H. Kuncarayakti,
M. Landoni,
M. Munari,
G. Pignata,
K. Radhakrishnan,
A. Rubin,
S. Scuderi,
F. Vitali,
D. Young,
J. Achrén,
J. A. Araiza-Durán,
I. Arcavi,
F. Battaini,
A. Brucalassi
, et al. (31 additional authors not shown)
Abstract:
SOXS (Son Of X-Shooter) is a single object spectrograph offering a simultaneous spectral coverage from U- to H-band, built by an international consortium for the 3.58-m ESO New Technology Telescope at the La Silla Observatory. It is designed to observe all kind of transients and variable sources discovered by different surveys with a highly flexible schedule maintained by the consortium, based on…
▽ More
SOXS (Son Of X-Shooter) is a single object spectrograph offering a simultaneous spectral coverage from U- to H-band, built by an international consortium for the 3.58-m ESO New Technology Telescope at the La Silla Observatory. It is designed to observe all kind of transients and variable sources discovered by different surveys with a highly flexible schedule maintained by the consortium, based on the Target of Opportunity concept. SOXS is going to be a fundamental spectroscopic partner for any kind of imaging survey, becoming one of the premier transient follow-up instruments in the Southern hemisphere. This paper gives an updated status of the project, when the instrument is in the advanced phase of integration and testing in Europe, prior to the activities in Chile.
△ Less
Submitted 15 September, 2022;
originally announced September 2022.
-
(Very) Fast astronomical photometry for meter-class telescopes
Authors:
L. Zampieri,
G. Naletto,
C. Barbieri,
A. Burtovoi,
M. Fiori,
A. Spolon,
P. Ochner,
L. Lessio,
G. Umbriaco,
M. Barbieri
Abstract:
Our team at the INAF-Astronomical Observatory of Padova and the University of Padova is engaged in the design, construction and operations of instruments with very high time accuracy in the optical band for applications to High Time Resolution Astrophysics and Quantum Astronomy. Two instruments were built to perform photon counting with sub-nanosecond temporal accuracy, Aqueye+ and Iqueye. Aqueye+…
▽ More
Our team at the INAF-Astronomical Observatory of Padova and the University of Padova is engaged in the design, construction and operations of instruments with very high time accuracy in the optical band for applications to High Time Resolution Astrophysics and Quantum Astronomy. Two instruments were built to perform photon counting with sub-nanosecond temporal accuracy, Aqueye+ and Iqueye. Aqueye+ is regularly mounted at the 1.8m Copernicus telescope in Asiago, while Iqueye was mounted at several 4m class telescopes around the world and is now attached through the Iqueye Fiber Interface at the 1.2m Galileo telescope in Asiago. They are used to perform coordinated high time resolution optical observations and, for the first time ever, experiments of optical intensity interferometry on a baseline of a few kilometers. I will report on recent technological developments and scientific results obtained within the framework of this project.
△ Less
Submitted 9 August, 2019;
originally announced August 2019.
-
Development of the Warm Astrometric Mask for MICADO astrometry calibration
Authors:
Gabriele Rodeghiero,
Miriam Sawczuck,
Jörg Uwe Pott,
Martin Glück,
Enrico Biancalani,
Maximilian Häberle,
Hannes Reichert,
Claudio Pernechele,
Vianak Naranjo,
Javier Moreno Ventas,
Peter Bizenberger,
Luigi Lessio
Abstract:
The achievement of $μ$arcsec relative astrometry with ground-based, near infrared, extremely large telescopes requires a significant endeavour of calibration strategies. In this paper we address the removal of instrument optical distortions coming from the ELT first light instrument MICADO and its adaptive optics system MAORY by means of an astrometric calibration mask. The results of the test cam…
▽ More
The achievement of $μ$arcsec relative astrometry with ground-based, near infrared, extremely large telescopes requires a significant endeavour of calibration strategies. In this paper we address the removal of instrument optical distortions coming from the ELT first light instrument MICADO and its adaptive optics system MAORY by means of an astrometric calibration mask. The results of the test campaign on a prototype mask (scale 1:2) has probed the manufacturing precision down to $\sim$ 50nm/1mm scale, leading to a relative precision $δσ\sim 5e-5$. The assessed manufacturing precision indicates that an astrometric relative precision of $δσ\sim 5e-5 = \frac{50μas}{1 arcsec}$ is in principle achievable, disclosing $μ$arcsec near infrared astrometry behind an extremely large telescope. The impact of $\sim$ 10-100 nm error residuals on the mask pinholes position is tolerable at a calibration level as confirmed by ray tracing simulations of realistic MICADO distortion patterns affected by mid spatial frequencies residuals. We demonstrated that the MICADO astrometric precision of 50 $μ$as is achievable also in presence of a mid spatial frequencies pattern and manufacturing errors of the WAM by fitting the distorted WAM pattern seen through the instrument with a 10$^{th}$ order Legendre polynomial.
△ Less
Submitted 2 February, 2019;
originally announced February 2019.
-
A 3.9 km baseline intensity interferometry photon counting experiment
Authors:
Giampiero Naletto,
Luca Zampieri,
Cesare Barbieri,
Mauro Barbieri,
Enrico Verroi,
Gabriele Umbriaco,
Paolo Favazza,
Luigi Lessio,
Giancarlo Farisato
Abstract:
In the last years we have operated two very similar ultrafast photon counting photometers (Iqueye and Aqueye+) on different telescopes. The absolute time accuracy in time tagging the detected photon with these instruments is of the order of 500 ps for hours of observation, allowing us to obtain, for example, the most accurate ever light curve in visible light of the optical pulsars. Recently we ad…
▽ More
In the last years we have operated two very similar ultrafast photon counting photometers (Iqueye and Aqueye+) on different telescopes. The absolute time accuracy in time tagging the detected photon with these instruments is of the order of 500 ps for hours of observation, allowing us to obtain, for example, the most accurate ever light curve in visible light of the optical pulsars. Recently we adapted the two photometers for working together on two telescopes at Asiago (Italy), for realizing an Hanbury-Brown and Twiss Intensity Interferometry like experiment with two 3.9 km distant telescopes. In this paper we report about the status of the activity and on the very preliminary results of our first attempt to measure the photon intensity correlation.
△ Less
Submitted 2 October, 2018;
originally announced October 2018.
-
High-Contrast study of the candidate planets and protoplanetary disk around HD~100546
Authors:
E. Sissa,
R. Gratton,
A. Garufi,
E. Rigliaco,
A. Zurlo,
D. Mesa,
M. Langlois,
J. de Boer,
S. Desidera,
C. Ginski,
A. -M. Lagrange,
A. -L. Maire,
A. Vigan,
M. Dima,
J. Antichi,
A. Baruffolo,
A. Bazzon,
M. Benisty,
J. -L. Beuzit,
B. Biller,
A. Boccaletti,
M. Bonavita,
M. Bonnefoy,
W. Brandner,
P. Bruno
, et al. (40 additional authors not shown)
Abstract:
The nearby Herbig Be star HD100546 is known to be a laboratory for the study of protoplanets and their relation with the circumstellar disk that is carved by at least 2 gaps. We observed the HD100546 environment with high contrast imaging exploiting several different observing modes of SPHERE, including datasets with/without coronagraphs, dual band imaging, integral field spectroscopy and polarime…
▽ More
The nearby Herbig Be star HD100546 is known to be a laboratory for the study of protoplanets and their relation with the circumstellar disk that is carved by at least 2 gaps. We observed the HD100546 environment with high contrast imaging exploiting several different observing modes of SPHERE, including datasets with/without coronagraphs, dual band imaging, integral field spectroscopy and polarimetry. The picture emerging from these different data sets is complex. Flux-conservative algorithms images clearly show the disk up to 200au. More aggressive algorithms reveal several rings and warped arms overlap** the main disk. The bright parts of this ring lie at considerable height over the disk mid-plane at about 30au. Our images demonstrate that the brightest wings close to the star in the near side of the disk are a unique structure, corresponding to the outer edge of the intermediate disk at ~40au. Modeling of the scattered light from the disk with a geometrical algorithm reveals that a moderately thin structure can well reproduce the light distribution in the flux-conservative images. We suggest that the gap between 44 and 113 au span between the 1:2 and 3:2 resonance orbits of a massive body located at ~70au that might coincide with the candidate planet HD100546b detected with previous thermal IR observations. In this picture, the two wings can be the near side of a ring formed by disk material brought out of the disk at the 1:2 resonance with the same massive object. While we find no clear evidence confirming detection of the planet candidate HD100546c in our data, we find a diffuse emission close to the expected position of HD100546b. This source can be described as an extremely reddened substellar object surrounded by a dust cloud or its circumplanetary disk. Its astrometry is broadly consistent with a circular orbital motion on the disk plane.
△ Less
Submitted 4 September, 2018;
originally announced September 2018.
-
A testing facility for AO on-sky demonstrations at the Copernico's Telescope within the ADONI framework
Authors:
S. Chinellato,
R. Ragazzoni,
J. Farinato,
D. Greggio,
M. Dima,
F. Biondi,
S. Benetti,
M. Bergomi,
E. Cappellaro,
E. Carolo,
V. Chiomento,
A. Frigo,
L. Lessio,
D. Magrin,
L. Marafatto,
G. Martorana,
E. Portaluri,
M. Rebeschini,
L. Tomasella,
L. Traverso,
M. Turatto,
G. Umbriaco,
D. Vassallo,
V. Viotto
Abstract:
In the context of ADONI - the ADaptive Optics National laboratory of INAF - we are arranging for a facility, accessible to the AO community, in which visiting multi-purpose instrumentation, e.g. systems and prototypes of innovative AO concepts, may be directly tested on sky. The facility is located at the 182cm Copernico telescope in Asiago, the largest telescope in Italy, at its Coude focus, for…
▽ More
In the context of ADONI - the ADaptive Optics National laboratory of INAF - we are arranging for a facility, accessible to the AO community, in which visiting multi-purpose instrumentation, e.g. systems and prototypes of innovative AO concepts, may be directly tested on sky. The facility is located at the 182cm Copernico telescope in Asiago, the largest telescope in Italy, at its Coude focus, for which refurbishment activities are carried out, given that this focus was initially foreseen in the design, but never implemented and used till today. The facility hosts a laboratory where specialized visiting AO instrumentation may be properly accommodated on an optical bench for on-sky demonstrations. We present the current status of the facility, describing the opto-mechanical design implemented at the telescope that allows to redirect the light toward the Coude focus, the tests on the opto-mechanics carried on for stability verification, the integration of the optical and mechanical components within the preexisting structure.
△ Less
Submitted 2 August, 2018;
originally announced August 2018.
-
SHARK-NIR, the coronagraphic camera for LBT, moving toward construction
Authors:
Jacopo Farinato,
Francesca Bacciotti,
Carlo Baffa,
Andrea Baruffolo,
Maria Bergomi,
Andrea Bianco,
Angela Bongiorno,
Luca Carbonaro,
Elena Carolo,
Alexis Carlotti,
Simonetta Chinellato,
Laird Close,
Marco De Pascale,
Marco Dima,
Valentina D'Orazi,
Simone Esposito,
Daniela Fantinel,
Giancarlo Farisato,
Wolgang Gaessler,
Emanuele Giallongo,
Davide Greggio,
Olivier Guyon,
Philip Hinz,
Luigi Lessio,
Franco Lisi
, et al. (15 additional authors not shown)
Abstract:
SHARK-NIR is one of the two coronagraphic instruments proposed for the Large Binocular Telescope. Together with SHARK-VIS (performing coronagraphic imaging in the visible domain), it will offer the possibility to do binocular observations combining direct imaging, coronagraphic imaging and coronagraphic low resolution spectroscopy in a wide wavelength domain, going from 0.5μm to 1.7μm. Additionall…
▽ More
SHARK-NIR is one of the two coronagraphic instruments proposed for the Large Binocular Telescope. Together with SHARK-VIS (performing coronagraphic imaging in the visible domain), it will offer the possibility to do binocular observations combining direct imaging, coronagraphic imaging and coronagraphic low resolution spectroscopy in a wide wavelength domain, going from 0.5μm to 1.7μm. Additionally, the contemporary usage of LMIRCam, the coronagraphic LBTI NIR camera, working from K to L band, will extend even more the covered wavelength range. In January 2017 SHARK-NIR underwent a successful final design review, which endorsed the instrument for construction and future implementation at LBT. We report here the final design of the instrument, which foresees two intermediate pupil planes and three focal planes to accomodate a certain number of coronagraphic techniques, selected to maximize the instrument contrast at various distances from the star. Exo-Planets search and characterization has been the science case driving the instrument design, but the SOUL upgrade of the LBT AO will increase the instrument performance in the faint end regime, allowing to do galactic (jets and disks) and extra-galactic (AGN and QSO) science on a relatively wide sample of targets, normally not reachable in other similar facilities.
△ Less
Submitted 1 August, 2018;
originally announced August 2018.
-
Design of a SiPM-based cluster for the Large Size Telescope camera of CTA
Authors:
M. Mallamaci,
B. Baibussinov,
G. Busetto,
D. Corti,
A. De Angelis,
F. Di Pierro,
M. Doro,
L. Lessio,
M. Mariotti,
E. Prandini,
R. Rando,
P. Vallania,
C. F. Vigorito
Abstract:
A Silicon Photomultiplier (SiPM)-based photodetector is being built to demonstrate its feasibility for an alternative silicon-based camera design for the Large Size Telescope (LST) of the Cherenkov Telescope Array. It has been designed to match the size of the standard Photomultiplier Tube (PMT) cluster unit and to be compatible with mechanics, electronics and focal plane optics of the first LST c…
▽ More
A Silicon Photomultiplier (SiPM)-based photodetector is being built to demonstrate its feasibility for an alternative silicon-based camera design for the Large Size Telescope (LST) of the Cherenkov Telescope Array. It has been designed to match the size of the standard Photomultiplier Tube (PMT) cluster unit and to be compatible with mechanics, electronics and focal plane optics of the first LST camera. Here, we describe the overall SiPM cluster design along with the main differences with respect to the currently used PMT cluster unit. The fast electronics of the SiPM pixel and its layout are also presented. In order to derive the best working condition for the final unit, we measured the SiPM performances in terms of gain, photo-detection efficiency and cross-talk. One pixel, a unit of 14 SiPMs, has been built. We will discuss also some preliminary results regarding this device and we will highlight the future steps of this project.
△ Less
Submitted 17 July, 2018;
originally announced July 2018.
-
New spectro-photometric characterization of the substellar object HR 2562 B using SPHERE
Authors:
D. Mesa,
J. -L. Baudino,
B. Charnay,
V. D'Orazi,
S. Desidera,
A. Boccaletti,
R. Gratton,
M. Bonnefoy,
P. Delorme,
M. Langlois,
A. Vigan,
A. Zurlo,
A. -L. Maire,
M. Janson,
J. Antichi,
A. Baruffolo,
P. Bruno,
E. Cascone,
G. Chauvin,
R. U. Claudi,
V. De Caprio,
D. Fantinel,
G. Farisato,
M. Feldt,
E. Giro
, et al. (10 additional authors not shown)
Abstract:
HR2562 is an F5V star located at ~33 pc from the Sun hosting a substellar companion that was discovered using the GPI instrument. The main objective of the present paper is to provide an extensive characterisation of the substellar companion, by deriving its fundamental properties. We observed HR 2562 with the near-infrared branch (IFS and IRDIS) of SPHERE at the VLT. During our observations IFS w…
▽ More
HR2562 is an F5V star located at ~33 pc from the Sun hosting a substellar companion that was discovered using the GPI instrument. The main objective of the present paper is to provide an extensive characterisation of the substellar companion, by deriving its fundamental properties. We observed HR 2562 with the near-infrared branch (IFS and IRDIS) of SPHERE at the VLT. During our observations IFS was operating in the YJ band, while IRDIS was observing with the $H$ broad-band filter. The data were reduced with the dedicated SPHERE GTO pipeline, which is custom-designed for this instrument. On the reduced images, we then applied the post-processing procedures that are specifically prepared to subtract the speckle noise. The companion is clearly detected in both IRDIS and IFS datasets. We obtained photometry in three different spectral bands. The comparison with template spectra allowed us to derive a spectral type of T2-T3 for the companion. Using both evolutionary and atmospheric models we inferred the main physical parameters of the companion obtaining a mass of 32+/-14$~MJup, T_{eff}=1100+/-200 K and log(g)=4.75+/-0.41.
△ Less
Submitted 19 December, 2017; v1 submitted 15 December, 2017;
originally announced December 2017.
-
Dynamical models to explain observations with SPHERE in planetary systems with double debris belts
Authors:
C. Lazzoni,
S. Desidera,
F. Marzari,
A. Boccaletti,
M. Langlois,
D. Mesa,
R. Gratton,
Q. Kral,
N. Pawellek,
J. Olofsson,
M. Bonnefoy,
G. Chauvin,
A. M. Lagrange,
A. Vigan,
E. Sissa,
J. Antichi,
H. Avenhaus,
A. Baruffolo,
J. L. Baudino,
A. Bazzon,
J. L. Beuzit,
B. Biller,
M. Bonavita,
W. Brandner,
P. Bruno
, et al. (44 additional authors not shown)
Abstract:
A large number of systems harboring a debris disk show evidence for a double belt architecture. One hypothesis for explaining the gap between the belts is the presence of one or more planets dynamically carving it. This work aims to investigate this scenario in systems harboring two components debris disks. All the targets in the sample were observed with the SPHERE instrument which performs high-…
▽ More
A large number of systems harboring a debris disk show evidence for a double belt architecture. One hypothesis for explaining the gap between the belts is the presence of one or more planets dynamically carving it. This work aims to investigate this scenario in systems harboring two components debris disks. All the targets in the sample were observed with the SPHERE instrument which performs high-contrast direct imaging. Positions of the inner and outer belts were estimated by SED fitting of the infrared excesses or, when available, from resolved images of the disk. Very few planets have been observed so far in debris disks gaps and we intended to test if such non-detections depend on the observational limits of the present instruments. This aim is achieved by deriving theoretical predictions of masses, eccentricities and semi-major axes of planets able to open the observed gaps and comparing such parameters with detection limits obtained with SPHERE. The relation between the gap and the planet is due to the chaotic zone around the orbit of the planet. The radial extent of this zone depends on the mass ratio between the planet and the star, on the semi-major axis and on the eccentricity of the planet and it can be estimated analytically. We apply the formalism to the case of one planet on a circular or eccentric orbit. We then consider multi-planetary systems: 2 and 3 equal-mass planets on circular orbits and 2 equal-mass planets on eccentric orbits in a packed configuration. We then compare each couple of values (M,a), derived from the dynamical analysis of single and multiple planetary models, with the detection limits obtained with SPHERE. Our results show that the apparent lack of planets in gaps between double belts could be explained by the presence of a system of two or more planets possibly of low mass and on an eccentric orbits whose sizes are below the present detection limits.
△ Less
Submitted 9 October, 2017;
originally announced October 2017.
-
Orbiting a binary: SPHERE characterisation of the HD 284149 system
Authors:
Mariangela Bonavita,
V. D'Orazi,
D. Mesa,
C. Fontanive,
S. Desidera,
S. Messina,
S. Daemgen,
R. Gratton,
A. Vigan,
M. Bonnefoy,
A. Zurlo,
J. Antichi,
H. Avenhaus,
A. Baruffolo,
J. L. Baudino,
J. L. Beuzit,
A. Boccaletti,
P. Bruno,
T. Buey,
M. Carbillet,
E. Cascone,
G. Chauvin,
R. U. Claudi,
V. De Caprio,
D. Fantinel
, et al. (30 additional authors not shown)
Abstract:
In this paper we present the results of the SPHERE observation of the HD 284149 system, aimed at a more detailed characterisation of both the primary and its brown dwarf companion. We observed HD 284149 in the near-infrared with SPHERE, using the imaging mode (IRDIS+IFS) and the long-slit spectroscopy mode (IRDIS-LSS). The data were reduced using the dedicated SPHERE pipeline, and algorithms such…
▽ More
In this paper we present the results of the SPHERE observation of the HD 284149 system, aimed at a more detailed characterisation of both the primary and its brown dwarf companion. We observed HD 284149 in the near-infrared with SPHERE, using the imaging mode (IRDIS+IFS) and the long-slit spectroscopy mode (IRDIS-LSS). The data were reduced using the dedicated SPHERE pipeline, and algorithms such as PCA and TLOCI were applied to reduce the speckle pattern. The IFS images revealed a previously unknown low-mass (~0.16$M_{\odot}$) stellar companion (HD 294149 B) at ~0.1$^{\prime\prime}$, compatible with previously observed radial velocity differences, as well as proper motion differences between Gaia and Tycho-2 measurements. The known brown dwarf companion (HD 284149 b) is clearly visible in the IRDIS images. This allowed us to refine both its photometry and astrometry. The analysis of the medium resolution IRDIS long slit spectra also allowed a refinement of temperature and spectral type estimates. A full reassessment of the age and distance of the system was also performed, leading to more precise values of both mass and semi-major axis. As a result of this study, HD 284149 ABb therefore becomes the latest addition to the (short) list of brown dwarfs on wide circumbinary orbits, providing new evidence to support recent claims that object in such configuration occur with a similar frequency to wide companions to single stars.
△ Less
Submitted 19 July, 2017;
originally announced July 2017.
-
Upper limits for Mass and Radius of objects around Proxima Cen from SPHERE/VLT
Authors:
D. Mesa,
A. Zurlo,
J. Milli,
R. Gratton,
S. Desidera,
M. Langlois,
A. Vigan,
M. Bonavita,
J. Antichi,
H. Avenhaus,
A. Baruffolo,
B. Biller,
A. Boccaletti,
P. Bruno,
E. Cascone,
G. Chauvin,
R. U. Claudi,
V. De Caprio,
D. Fantinel,
G. Farisato,
J. Girard,
E. Giro,
J. Hagelberg,
S. Incorvaia,
M. Janson
, et al. (14 additional authors not shown)
Abstract:
The recent discovery of an earth-like planet around Proxima Centauri has drawn much attention to this star and its environment. We performed a series of observations of Proxima Centauri using SPHERE, the planet finder instrument installed at the ESO Very Large Telescope UT3, using its near infrared modules, IRDIS and IFS. No planet was directly detected but we set upper limits on the mass up to 7…
▽ More
The recent discovery of an earth-like planet around Proxima Centauri has drawn much attention to this star and its environment. We performed a series of observations of Proxima Centauri using SPHERE, the planet finder instrument installed at the ESO Very Large Telescope UT3, using its near infrared modules, IRDIS and IFS. No planet was directly detected but we set upper limits on the mass up to 7 au exploiting the AMES-COND models. Our IFS observations reveal that no planet more massive than ~6-7 M Jup can be present within 1 au. The dual band imaging camera IRDIS also enables us to probe larger separations than the other techniques like the radial velocity or astrometry. We obtained mass limits of the order of 4 M Jup at separations of 2 au or larger representing the most stringent mass limits at separations larger than 5 au available at the moment. We also did an attempt to estimate the radius of possible planets around Proxima using the reflected light. Since the residual noise for this observations are dominated by photon noise and thermal background, longer exposures in good observing conditions could further improve the achievable contrast limit.
△ Less
Submitted 30 November, 2016;
originally announced November 2016.
-
Contributions of the Cherenkov Telescope Array (CTA) to the 6th International Symposium on High-Energy Gamma-Ray Astronomy (Gamma 2016)
Authors:
The CTA Consortium,
:,
A. Abchiche,
U. Abeysekara,
Ó. Abril,
F. Acero,
B. S. Acharya,
C. Adams,
G. Agnetta,
F. Aharonian,
A. Akhperjanian,
A. Albert,
M. Alcubierre,
J. Alfaro,
R. Alfaro,
A. J. Allafort,
R. Aloisio,
J. -P. Amans,
E. Amato,
L. Ambrogi,
G. Ambrosi,
M. Ambrosio,
J. Anderson,
M. Anduze,
E. O. Angüner
, et al. (1387 additional authors not shown)
Abstract:
List of contributions from the Cherenkov Telescope Array (CTA) Consortium presented at the 6th International Symposium on High-Energy Gamma-Ray Astronomy (Gamma 2016), July 11-15, 2016, in Heidelberg, Germany.
List of contributions from the Cherenkov Telescope Array (CTA) Consortium presented at the 6th International Symposium on High-Energy Gamma-Ray Astronomy (Gamma 2016), July 11-15, 2016, in Heidelberg, Germany.
△ Less
Submitted 17 October, 2016;
originally announced October 2016.
-
Intensity Interferometry with Aqueye+ and Iqueye in Asiago
Authors:
L. Zampieri,
G. Naletto,
C. Barbieri,
M. Barbieri,
E. Verroi,
G. Umbriaco,
P. Favazza,
L. Lessio,
G. Farisato
Abstract:
Since a number of years our group is engaged in the design, construction and operation of instruments with very high time resolution in the optical band for applications to Quantum Astronomy and more conventional Astrophysics. Two instruments were built to perform photon counting with sub-nanosecond temporal accuracy. The first of the two, Aqueye+, is regularly mounted at the 1.8 m Copernicus tele…
▽ More
Since a number of years our group is engaged in the design, construction and operation of instruments with very high time resolution in the optical band for applications to Quantum Astronomy and more conventional Astrophysics. Two instruments were built to perform photon counting with sub-nanosecond temporal accuracy. The first of the two, Aqueye+, is regularly mounted at the 1.8 m Copernicus telescope in Asiago, while the second one, Iqueye, was mounted at the ESO New Technology Telescope in Chile, and at the William Herschel Telescope and Telescopio Nazionale Galileo on the Roque (La Palma, Canary Islands). Both instruments deliver extraordinarily accurate results in optical pulsar timing. Recently, Iqueye was moved to Asiago to be mounted at the 1.2 m Galileo telescope to attempt, for the first time ever, experiments of optical intensity interferometry (a` la Hanbury Brown and Twiss) on a baseline of a few kilometers, together with the Copernicus telescope. This application was one of the original goals for the development of our instrumentation. To carry out these measurements, we are experimenting a new way of coupling the instruments to the telescopes, by means of moderate-aperture, low-optical-attenuation multi-mode optical fibers with a double-clad design. Fibers are housed in dedicated optical interfaces attached to the focus of another instrument of the 1.8 m telescope (Aqueye+) or to the Nasmyth focus of the 1.2 m telescope (Iqueye). This soft-mount solution has the advantage to facilitate the mounting of the photon counters, to keep them under controlled temperature and humidity conditions (reducing potential systematics related to varying ambient conditions), and to mitigate scheduling requirements. Here we will describe the first successful implementation of the Asiago intensity interferometer and future plans for improving it.
△ Less
Submitted 5 September, 2016;
originally announced September 2016.
-
First results of the two square meters multilayer glass composite mirror design proposed for the Cherenkov Telescope Array developed at INFN
Authors:
C. Schultz,
M. Doro,
L. Lessio,
M. Mariotti,
R. Rando
Abstract:
The Cherenkov Telescope Array (CTA) is a future ground-based gamma-ray astronomy detector that will consist of more than 100 Imaging Atmospheric Cherenkov Telescopes of different sizes. The total reflective surface of roughly 10 000 m$^2$ requires unprecedented technological efforts towards a cost-efficient production of light-weight and reliable mirror substrates at high production rate. We repor…
▽ More
The Cherenkov Telescope Array (CTA) is a future ground-based gamma-ray astronomy detector that will consist of more than 100 Imaging Atmospheric Cherenkov Telescopes of different sizes. The total reflective surface of roughly 10 000 m$^2$ requires unprecedented technological efforts towards a cost-efficient production of light-weight and reliable mirror substrates at high production rate. We report on a new mirror concept proposed for CTA developed by INFN, which is based on the replication from a spherical convex mold under low pressure. The mirror substrate is an open structure design made by thin glass layers at the mirror's front and rear interspaced by steel cylinders. A first series of nominal size mirrors has been produced, for which we discuss the optical properties in terms of radius of curvature and focusing power.
△ Less
Submitted 3 September, 2015;
originally announced September 2015.
-
CTA Contributions to the 34th International Cosmic Ray Conference (ICRC2015)
Authors:
The CTA Consortium,
:,
A. Abchiche,
U. Abeysekara,
Ó. Abril,
F. Acero,
B. S. Acharya,
M. Actis,
G. Agnetta,
J. A. Aguilar,
F. Aharonian,
A. Akhperjanian,
A. Albert,
M. Alcubierre,
R. Alfaro,
E. Aliu,
A. J. Allafort,
D. Allan,
I. Allekotte,
R. Aloisio,
J. -P. Amans,
E. Amato,
L. Ambrogi,
G. Ambrosi,
M. Ambrosio
, et al. (1290 additional authors not shown)
Abstract:
List of contributions from the CTA Consortium presented at the 34th International Cosmic Ray Conference, 30 July - 6 August 2015, The Hague, The Netherlands.
List of contributions from the CTA Consortium presented at the 34th International Cosmic Ray Conference, 30 July - 6 August 2015, The Hague, The Netherlands.
△ Less
Submitted 11 September, 2015; v1 submitted 24 August, 2015;
originally announced August 2015.
-
A facility to evaluate the focusing performance of mirrors for Cherenkov Telescopes
Authors:
Rodolfo Canestrari,
Enrico Giro,
Giacomo Bonnoli,
Giancarlo Farisato,
Luigi Lessio,
Gabriele Rodeghiero,
Rossella Spiga,
Giorgio Toso,
Giovanni Pareschi
Abstract:
Cherenkov Telescopes are equipped with optical dishes of large diameter -- in general based on segmented mirrors -- with typical angular resolution of a few arc-minutes. To evaluate the mirror's quality specific metrological systems are required that possibly take into account the environmental conditions in which typically these telescopes operate (in open air without dome protection). For this p…
▽ More
Cherenkov Telescopes are equipped with optical dishes of large diameter -- in general based on segmented mirrors -- with typical angular resolution of a few arc-minutes. To evaluate the mirror's quality specific metrological systems are required that possibly take into account the environmental conditions in which typically these telescopes operate (in open air without dome protection). For this purpose a new facility for the characterization of mirrors has been developed at the labs of the Osservatorio Astronomico di Brera of the Italian National Institute of Astrophysics. The facility allows the precise measurement of the radius of curvature and the distribution of the concentred light in terms of focused and scattered components and it works in open air. In this paper we describe the facility and report some examples of its measuring capabilities.
△ Less
Submitted 8 January, 2016; v1 submitted 12 April, 2015;
originally announced April 2015.
-
Status of the technologies for the production of the Cherenkov Telescope Array (CTA) mirrors
Authors:
G. Pareschi,
T. Armstrong,
H. Baba,
J. Bähr,
A. Bonardi,
G. Bonnoli,
P. Brun,
R. Canestrari,
P. Chadwick,
M. Chikawa,
P. -H. Carton,
V. de Souza,
J. Dipold,
M. Doro,
D. Durand,
M. Dyrda,
A. Förster,
M. Garczarczyk,
E. Giro,
J. -F. Glicenstein,
Y. Hanabata,
M. Hayashida,
M. Hrabovski,
C. Jeanney,
M. Kagaya
, et al. (32 additional authors not shown)
Abstract:
The Cherenkov Telescope Array (CTA) is the next generation very high-energy gamma-ray observatory, with at least 10 times higher sensitivity than current instruments. CTA will comprise several tens of Imaging Atmospheric Cherenkov Telescopes (IACTs) operated in array-mode and divided into three size classes: large, medium and small telescopes. The total reflective surface could be up to 10,000 m2…
▽ More
The Cherenkov Telescope Array (CTA) is the next generation very high-energy gamma-ray observatory, with at least 10 times higher sensitivity than current instruments. CTA will comprise several tens of Imaging Atmospheric Cherenkov Telescopes (IACTs) operated in array-mode and divided into three size classes: large, medium and small telescopes. The total reflective surface could be up to 10,000 m2 requiring unprecedented technological efforts. The properties of the reflector directly influence the telescope performance and thus constitute a fundamental ingredient to improve and maintain the sensitivity. The R&D status of lightweight, reliable and cost-effective mirror facets for the CTA telescope reflectors for the different classes of telescopes is reviewed in this paper.
△ Less
Submitted 7 October, 2013;
originally announced October 2013.
-
The ASTRI Mini-Array Science Case
Authors:
S. Vercellone,
G. Agnetta,
L. A. Antonelli,
D. Bastieri,
G. Bellassai,
M. Belluso,
C. Bigongiari,
S. Billotta,
B. Biondo,
G. Bonanno,
G. Bonnoli,
P. Bruno,
A. Bulgarelli,
R. Canestrari,
M. Capalbi,
P. Caraveo,
A. Carosi,
E. Cascone,
O. Catalano,
M. Cereda,
P. Conconi,
V. Conforti,
G. Cusumano,
V. De Caprio,
A. De Luca
, et al. (55 additional authors not shown)
Abstract:
ASTRI is a Flagship Project financed by the Italian Ministry of Education, University and Research, and led by INAF, the Italian National Institute of Astrophysics. Within this framework, INAF is currently develo** an end-to-end prototype of a Small Size Telescope in a dual-mirror configuration (SST-2M) for the Cherenkov Telescope Array (CTA), scheduled to start data acquisition in 2014. Althoug…
▽ More
ASTRI is a Flagship Project financed by the Italian Ministry of Education, University and Research, and led by INAF, the Italian National Institute of Astrophysics. Within this framework, INAF is currently develo** an end-to-end prototype of a Small Size Telescope in a dual-mirror configuration (SST-2M) for the Cherenkov Telescope Array (CTA), scheduled to start data acquisition in 2014. Although the ASTRI SST-2M prototype is mainly a technological demonstrator, it will perform scientific observations of the Crab Nebula, Mrk 421 and Mrk 501 at E>1 TeV. A remarkable improvement in terms of performance could come from the operation, in 2016, of a SST-2M mini-array, composed of a few SST-2M telescopes to be placed at final CTA Southern Site. The SST mini-array will be able to study in great detail relatively bright sources (a few x 10E-12 erg/cm2/s at 10 TeV) with angular resolution of a few arcmin and energy resolution of about 10-15%. Thanks to the stereo approach, it will be possible to verify the wide field of view (FoV) performance through the detections of very high-energy showers with core located at a distance up to 500 m, to compare the mini-array performance with the Monte Carlo expectations by means of deep observations of selected targets, and to perform the first CTA science at the beginning of the mini-array operations. Prominent sources such as extreme blazars, nearby well-known BL Lac objects and radio-galaxies, galactic pulsar wind nebulae, supernovae remnants, micro-quasars, and the Galactic Center can be observed in a previously unexplored energy range, in order to investigate the electron acceleration and cooling, relativistic and non relativistic shocks, the search for cosmic-ray (CR) Pevatrons, the study of the CR propagation, and the impact of the extragalactic background light on the spectra of the sources.
△ Less
Submitted 22 July, 2013;
originally announced July 2013.
-
Expected performance of the ASTRI-SST-2M telescope prototype
Authors:
C. Bigongiari,
F. Di Pierro,
C. Morello,
A. Stamerra,
P. Vallania,
G. Agnetta,
L. A. Antonelli,
D. Bastieri,
G. Bellassai,
M. Belluso,
S. Billotta,
B. Biondo,
G. Bonanno,
G. Bonnoli,
P. Bruno,
A. Bulgarelli,
R. Canestrari,
M. Capalbi,
P. Caraveo,
A. Carosi,
E. Cascone,
O. Catalano,
M. Cereda,
P. Conconi,
V. Conforti
, et al. (59 additional authors not shown)
Abstract:
ASTRI (Astrofisica con Specchi a Tecnologia Replicante Italiana) is an Italian flagship project pursued by INAF (Istituto Nazionale di Astrofisica) strictly linked to the development of the Cherenkov Telescope Array, CTA. Primary goal of the ASTRI program is the design and production of an end-to-end prototype of a Small Size Telescope for the CTA sub-array devoted to the highest gamma-ray energy…
▽ More
ASTRI (Astrofisica con Specchi a Tecnologia Replicante Italiana) is an Italian flagship project pursued by INAF (Istituto Nazionale di Astrofisica) strictly linked to the development of the Cherenkov Telescope Array, CTA. Primary goal of the ASTRI program is the design and production of an end-to-end prototype of a Small Size Telescope for the CTA sub-array devoted to the highest gamma-ray energy region. The prototype, named ASTRI SST-2M, will be tested on field in Italy during 2014. This telescope will be the first Cherenkov telescope adopting the double reflection layout in a Schwarzschild-Couder configuration with a tessellated primary mirror and a monolithic secondary mirror. The collected light will be focused on a compact and light-weight camera based on silicon photo-multipliers covering a 9.6 deg full field of view. Detailed Monte Carlo simulations have been performed to estimate the performance of the planned telescope. The results regarding its energy threshold, sensitivity and angular resolution are shown and discussed.
△ Less
Submitted 18 July, 2013;
originally announced July 2013.
-
The dual-mirror Small Size Telescope for the Cherenkov Telescope Array
Authors:
G. Pareschi,
G. Agnetta,
L. A. Antonelli,
D. Bastieri,
G. Bellassai,
M. Belluso,
C. Bigongiari,
S. Billotta,
B. Biondo,
G. Bonanno,
G. Bonnoli,
P. Bruno,
A. Bulgarelli,
R. Canestrari,
M. Capalbi,
P. Caraveo,
A. Carosi,
E. Cascone,
O. Catalano,
M. Cereda,
P. Conconi,
V. Conforti,
G. Cusumano,
V. De Caprio,
A. De Luca
, et al. (89 additional authors not shown)
Abstract:
In this paper, the development of the dual mirror Small Size Telescopes (SST) for the Cherenkov Telescope Array (CTA) is reviewed. Up to 70 SST, with a primary mirror diameter of 4 m, will be produced and installed at the CTA southern site. These will allow investigation of the gamma-ray sky at the highest energies accessible to CTA, in the range from about 1 TeV to 300 TeV. The telescope presente…
▽ More
In this paper, the development of the dual mirror Small Size Telescopes (SST) for the Cherenkov Telescope Array (CTA) is reviewed. Up to 70 SST, with a primary mirror diameter of 4 m, will be produced and installed at the CTA southern site. These will allow investigation of the gamma-ray sky at the highest energies accessible to CTA, in the range from about 1 TeV to 300 TeV. The telescope presented in this contribution is characterized by two major innovations: the use of a dual mirror Schwarzschild-Couder configuration and of an innovative camera using as sensors either multi-anode photomultipliers (MAPM) or silicon photomultipliers (SiPM). The reduced plate-scale of the telescope, achieved with the dual-mirror optics, allows the camera to be compact (40 cm in diameter), and low-cost. The camera, which has about 2000 pixels of size 6x6 mm^2, covers a field of view of 10°. The dual mirror telescopes and their cameras are being developed by three consortia, ASTRI (Astrofisica con Specchi a Tecnologia Replicante Italiana, Italy/INAF), GATE (Gamma-ray Telescope Elements, France/Paris Observ.) and CHEC (Compact High Energy Camera, universities in UK, US and Japan) which are merging their efforts in order to finalize an end-to-end design that will be constructed for CTA. A number of prototype structures and cameras are being developed in order to investigate various alternative designs. In this contribution, these designs are presented, along with the technological solutions under study.
△ Less
Submitted 18 July, 2013;
originally announced July 2013.
-
Mirror Development for the Cherenkov Telescope Array
Authors:
A. Förster,
T. Armstrong,
H. Baba,
J. Bähr,
A. Bonardi,
G. Bonnoli,
P. Brun,
R. Canestrari,
P. Chadwick,
M. Chikawa,
P. -H. Carton,
V. De Souza,
J. Dipold,
M. Doro,
D. Durand,
M. Dyrda,
E. Giro,
J. -F. Glicenstein,
Y. Hanabata,
M. Hayashida,
M. Hrabovski,
C. Jeanney,
M. Kagaya,
H. Katagiri,
L. Lessio
, et al. (31 additional authors not shown)
Abstract:
The Cherenkov Telescope Array (CTA) is a planned observatory for very-high energy gamma-ray astronomy. It will consist of several tens of telescopes of different sizes, with a total mirror area of up to 10,000 square meters. Most mirrors of current installations are either polished glass mirrors or diamond-turned aluminium mirrors, both labour intensive technologies. For CTA, several new technolog…
▽ More
The Cherenkov Telescope Array (CTA) is a planned observatory for very-high energy gamma-ray astronomy. It will consist of several tens of telescopes of different sizes, with a total mirror area of up to 10,000 square meters. Most mirrors of current installations are either polished glass mirrors or diamond-turned aluminium mirrors, both labour intensive technologies. For CTA, several new technologies for a fast and cost-efficient production of light-weight and reliable mirror substrates have been developed and industrial pre-production has started for most of them. In addition, new or improved aluminium-based and dielectric surface coatings have been developed to increase the reflectance over the lifetime of the mirrors compared to those of current Cherenkov telescope instruments.
△ Less
Submitted 17 July, 2013;
originally announced July 2013.
-
Towards the ASTRI mini-array
Authors:
F. Di Pierro,
C. Bigongiari,
C. Morello,
A. Stamerra,
P. Vallania,
G. Agnetta,
L. A. Antonelli,
D. Bastieri,
G. Bellassai,
M. Belluso,
S. Billotta,
B. Biondo,
G. Bonanno,
G. Bonnoli,
P. Bruno,
A. Bulgarelli,
R. Canestrari,
M. Capalbi,
P. Caraveo,
A. Carosi,
E. Cascone,
O. Catalano,
M. Cereda,
P. Conconi,
V. Conforti
, et al. (55 additional authors not shown)
Abstract:
The Cherenkov Telescope Array (CTA) will consist of an array of three types of telescopes covering a wide energy range, from tens of GeV up to more than 100 TeV. The high energy section (> 3 TeV) will be covered by the Small Size Telescopes (SST). ASTRI (Astrofisica con Specchi a Tecnologia Replicante Italiana) is a flagship project of the Italian Ministry of Research and Education led by INAF, ai…
▽ More
The Cherenkov Telescope Array (CTA) will consist of an array of three types of telescopes covering a wide energy range, from tens of GeV up to more than 100 TeV. The high energy section (> 3 TeV) will be covered by the Small Size Telescopes (SST). ASTRI (Astrofisica con Specchi a Tecnologia Replicante Italiana) is a flagship project of the Italian Ministry of Research and Education led by INAF, aiming at the design and construction of a prototype of the Dual Mirror SST. In a second phase the ASTRI project foresees the installation of the first elements of the SST array at the CTA southern site, a mini-array of 5-7 telescopes. The optimization of the layout of this mini-array embedded in the SST array of the CTA Observatory has been the object of an intense simulation effort. In this work we present the expected mini-array performance in terms of energy threshold, angular and energy resolution and sensitivity.
△ Less
Submitted 15 July, 2013;
originally announced July 2013.
-
CTA contributions to the 33rd International Cosmic Ray Conference (ICRC2013)
Authors:
The CTA Consortium,
:,
O. Abril,
B. S. Acharya,
M. Actis,
G. Agnetta,
J. A. Aguilar,
F. Aharonian,
M. Ajello,
A. Akhperjanian,
M. Alcubierre,
J. Aleksic,
R. Alfaro,
E. Aliu,
A. J. Allafort,
D. Allan,
I. Allekotte,
R. Aloisio,
E. Amato,
G. Ambrosi,
M. Ambrosio,
J. Anderson,
E. O. Angüner,
L. A. Antonelli,
V. Antonuccio
, et al. (1082 additional authors not shown)
Abstract:
Compilation of CTA contributions to the proceedings of the 33rd International Cosmic Ray Conference (ICRC2013), which took place in 2-9 July, 2013, in Rio de Janeiro, Brazil
Compilation of CTA contributions to the proceedings of the 33rd International Cosmic Ray Conference (ICRC2013), which took place in 2-9 July, 2013, in Rio de Janeiro, Brazil
△ Less
Submitted 29 July, 2013; v1 submitted 8 July, 2013;
originally announced July 2013.
-
The ASTRI Project: a mini-array of dual-mirror small Cherenkov telescopes for CTA
Authors:
N. La Palombara,
G. Agnetta,
L. A. Antonelli,
D. Bastieri,
G. Bellassai,
M. Belluso,
C. Bigongiari,
S. Billotta,
B. Biondo,
G. Bonanno,
G. Bonnoli,
P. Bruno,
A. Bulgarelli,
R. Canestrari,
M. Capalbi,
P. Caraveo,
A. Carosi,
E. Cascone,
O. Catalano,
M. Cereda,
P. Conconi,
V. Conforti,
G. Cusumano,
V. De Caprio,
A. De Luca
, et al. (54 additional authors not shown)
Abstract:
ASTRI is a flagship project of the Italian Ministry of Education, University and Research, which aims to develop an end-to-end prototype of the CTA small-size telescope. The proposed design is characterized by a dual-mirror Schwarzschild-Couder configuration and a camera based on Silicon photo-multipliers, two challenging but innovative technological solutions which will be adopted for the first t…
▽ More
ASTRI is a flagship project of the Italian Ministry of Education, University and Research, which aims to develop an end-to-end prototype of the CTA small-size telescope. The proposed design is characterized by a dual-mirror Schwarzschild-Couder configuration and a camera based on Silicon photo-multipliers, two challenging but innovative technological solutions which will be adopted for the first time on a Cherenkov telescope. Here we describe the current status of the project, the expected performance and the possibility to realize a mini-array composed by a few small-size telescopes, which shall be placed at the final CTA Southern Site.
△ Less
Submitted 15 May, 2013; v1 submitted 24 April, 2013;
originally announced April 2013.