-
The Athena X-ray Integral Field Unit: a consolidated design for the system requirement review of the preliminary definition phase
Authors:
Didier Barret,
Vincent Albouys,
Jan-Willem den Herder,
Luigi Piro,
Massimo Cappi,
Juhani Huovelin,
Richard Kelley,
J. Miguel Mas-Hesse,
Stéphane Paltani,
Gregor Rauw,
Agata Rozanska,
Jiri Svoboda,
Joern Wilms,
Noriko Yamasaki,
Marc Audard,
Simon Bandler,
Marco Barbera,
Xavier Barcons,
Enrico Bozzo,
Maria Teresa Ceballos,
Ivan Charles,
Elisa Costantini,
Thomas Dauser,
Anne Decourchelle,
Lionel Duband
, et al. (274 additional authors not shown)
Abstract:
The Athena X-ray Integral Unit (X-IFU) is the high resolution X-ray spectrometer, studied since 2015 for flying in the mid-30s on the Athena space X-ray Observatory, a versatile observatory designed to address the Hot and Energetic Universe science theme, selected in November 2013 by the Survey Science Committee. Based on a large format array of Transition Edge Sensors (TES), it aims to provide sp…
▽ More
The Athena X-ray Integral Unit (X-IFU) is the high resolution X-ray spectrometer, studied since 2015 for flying in the mid-30s on the Athena space X-ray Observatory, a versatile observatory designed to address the Hot and Energetic Universe science theme, selected in November 2013 by the Survey Science Committee. Based on a large format array of Transition Edge Sensors (TES), it aims to provide spatially resolved X-ray spectroscopy, with a spectral resolution of 2.5 eV (up to 7 keV) over an hexagonal field of view of 5 arc minutes (equivalent diameter). The X-IFU entered its System Requirement Review (SRR) in June 2022, at about the same time when ESA called for an overall X-IFU redesign (including the X-IFU cryostat and the cooling chain), due to an unanticipated cost overrun of Athena. In this paper, after illustrating the breakthrough capabilities of the X-IFU, we describe the instrument as presented at its SRR, browsing through all the subsystems and associated requirements. We then show the instrument budgets, with a particular emphasis on the anticipated budgets of some of its key performance parameters. Finally we briefly discuss on the ongoing key technology demonstration activities, the calibration and the activities foreseen in the X-IFU Instrument Science Center, and touch on communication and outreach activities, the consortium organisation, and finally on the life cycle assessment of X-IFU aiming at minimising the environmental footprint, associated with the development of the instrument. Thanks to the studies conducted so far on X-IFU, it is expected that along the design-to-cost exercise requested by ESA, the X-IFU will maintain flagship capabilities in spatially resolved high resolution X-ray spectroscopy, enabling most of the original X-IFU related scientific objectives of the Athena mission to be retained. (abridged).
△ Less
Submitted 28 November, 2022; v1 submitted 30 August, 2022;
originally announced August 2022.
-
The Calibration Units of KM3NeT
Authors:
R. Le Breton,
M. Billault,
C. Boutonnet,
C. Champion,
S. Colonges,
A. Cosquer,
A. Creusot,
S. Henry,
A. Ilioni,
P. Keller,
P. Lagier,
R. Lahmann,
P. Lamare,
J. Lesrel,
M. Lindsey Clark,
J. Royon,
G. Riccobene,
D. Samtleben,
V. Van Elewyck
Abstract:
KM3NeT is a deep-sea infrastructure composed of two neutrino telescopes being deployed in the Mediterranean Sea: ARCA, near Sicily in Italy, designed for neutrino astronomy, and ORCA, near Toulon in France, designed for neutrino oscillation physics. To achieve the best performance, the exact location of the optical modules, affected by sea current, must be known at any time and the timing resoluti…
▽ More
KM3NeT is a deep-sea infrastructure composed of two neutrino telescopes being deployed in the Mediterranean Sea: ARCA, near Sicily in Italy, designed for neutrino astronomy, and ORCA, near Toulon in France, designed for neutrino oscillation physics. To achieve the best performance, the exact location of the optical modules, affected by sea current, must be known at any time and the timing resolution between optical modules must reach the nanosecond. Moreover, the properties of the environment in which the telescopes are deployed must be continuously monitored because they affect the timing and positioning calibration. KM3NeT is going to deploy several dedicated Calibration Units to meet these calibration goals. Because of the difference in size between ARCA and ORCA, the design of the Calibration Unit is not the same for the two sites. This proceeding describes all the devices, features and purposes of the Calibration Units with a focus on the ORCA Calibration Unit.
△ Less
Submitted 11 August, 2021; v1 submitted 28 July, 2021;
originally announced July 2021.
-
A mTCA-based low level RF system prototype for MYRRHA 100 MeV project
Authors:
W. Sarlin,
Y. Gargouri,
C. Joly,
J. -F. Yaniche,
J. Lesrel,
S. Berthelot,
A. Escalda,
M. Pereira,
G. Ferry,
N. Gandolfo,
J. Bouvier,
P. Della Faille
Abstract:
The first phase of the MYRRHA (Multi-purpose hYbrid Research Reactor for High-tech Applications) project, MINERVA, was launched in September 2018. Through collaboration with the SCK-CEN, IN2P3 laboratories take in charge the developments of several parts of the accelerator, including a fully equipped Spoke cryomodule prototype and a cold valves box. This cryomodule will integrate two superconducti…
▽ More
The first phase of the MYRRHA (Multi-purpose hYbrid Research Reactor for High-tech Applications) project, MINERVA, was launched in September 2018. Through collaboration with the SCK-CEN, IN2P3 laboratories take in charge the developments of several parts of the accelerator, including a fully equipped Spoke cryomodule prototype and a cold valves box. This cryomodule will integrate two superconducting single spoke cavities operating at 2K, the RF power couplers and the cold tuning systems associated. For control and regulation purpose, a mTCA LLRF system prototype is being implemented and will be presented here alongside with the hardware, VHDL and EPICS developments that aim to fulfil MYRRHA's ambitious requirements.
△ Less
Submitted 25 September, 2019; v1 submitted 19 September, 2019;
originally announced September 2019.
-
Low Level Radio-Frequency system used for testing the RFQ prototype of MYRRHA
Authors:
C. Joly,
W. Sarlin,
Y. Gargouri,
J. Lesrel,
J-F. Yaniche,
S. Berthelot,
A. Escalda,
G. Ferry,
B-Y. Ky,
M. Pereira,
J. Belmans,
F. Davin,
W. De Cock,
P. Della Faille,
F. Pompon,
D. Vandeplassche
Abstract:
Within the framework of the European, project MYRTE (MYRRHA Research and Transmutation Endeavour) of the H2020 program, a 4-Rods RFQ (Radio Frequency Quadrupole) has been designed at 176.1 MHz RFQ for accelerating up to 4 mA protons in CW (Continuous Wave) operation from 30 keV up to 1.5 MeV. A LLRF prototype has been developed to regulate the amplitude and the phase of the accelerator field into…
▽ More
Within the framework of the European, project MYRTE (MYRRHA Research and Transmutation Endeavour) of the H2020 program, a 4-Rods RFQ (Radio Frequency Quadrupole) has been designed at 176.1 MHz RFQ for accelerating up to 4 mA protons in CW (Continuous Wave) operation from 30 keV up to 1.5 MeV. A LLRF prototype has been developed to regulate the amplitude and the phase of the accelerator field into the RFQ and the frequency of the RFQ controlling the motor of the frequency tuner. The facility at Louvain-La-Neuve will be presented with a focus on the LLRF system used and some preliminary results.
△ Less
Submitted 1 October, 2019; v1 submitted 18 September, 2019;
originally announced September 2019.
-
The STELLA Apparatus for Particle-Gamma Coincidence Fusion Measurements with Nanosecond Timing
Authors:
M. Heine,
S. Courtin,
G. Fruet,
D. G. Jenkins,
L. Morris,
D. Montanari,
M. Rudigier,
P. Adsley,
D. Curien,
S. Della Negra,
J. Lesrel,
C. Beck,
L. Charles,
P. Dené,
F. Haas,
F. Hammache,
G. Heitz,
M. Krauth,
A. Meyer,
Zs. Podolyák,
P. H. Regan,
M. Richer,
N. de Séréville,
C. Stodel
Abstract:
The STELLA (STELlar LAboratory) experimental station for the measurement of deep sub-barrier light heavy-ion fusion cross sections has been installed at the Andromède accelerator at the Institut de Physique Nucléaire, Orsay (France). The setup is designed for the direct experimental determination of heavy-ion fusion cross sections as low as tens of picobarn. The detection concept is based on the c…
▽ More
The STELLA (STELlar LAboratory) experimental station for the measurement of deep sub-barrier light heavy-ion fusion cross sections has been installed at the Andromède accelerator at the Institut de Physique Nucléaire, Orsay (France). The setup is designed for the direct experimental determination of heavy-ion fusion cross sections as low as tens of picobarn. The detection concept is based on the coincident measurement of emitted gamma rays with the UK FATIMA (FAst TIMing Array) and evaporated charged particles using a silicon detector array. Key developments relevant to reaching the extreme sub-barrier fusion region are a rotating target mechanism to sustain beam intensities above 10$μ$A, an ultra-high vacuum to prevent carbon built-up and gamma charged-particle timing in the order of nanoseconds sufficient to separate proton and alpha particles.
△ Less
Submitted 21 February, 2018;
originally announced February 2018.