Showing 1–20 of 20 results for author: Leon-Saval, S G

Learning the Lantern: Neural network applications to broadband photonic lantern modelling

Authors: David Sweeney, Barnaby R. M. Norris, Peter Tuthill, Richard Scalzo, ** Wei, Christopher H. Betters, Sergio G. Leon-Saval

Abstract: Photonic lanterns allow the decomposition of highly multimodal light into a simplified modal basis such as single-moded and/or few-moded. They are increasingly finding uses in astronomy, optics and telecommunications. Calculating propagation through a photonic lantern using traditional algorithms takes $\sim 1$ hour per simulation on a modern CPU. This paper demonstrates that neural networks can b… ▽ More Photonic lanterns allow the decomposition of highly multimodal light into a simplified modal basis such as single-moded and/or few-moded. They are increasingly finding uses in astronomy, optics and telecommunications. Calculating propagation through a photonic lantern using traditional algorithms takes $\sim 1$ hour per simulation on a modern CPU. This paper demonstrates that neural networks can bridge the disparate opto-electronic systems, and when trained can achieve a speed-up of over 5 orders of magnitude. We show that this approach can be used to model photonic lanterns with manufacturing defects as well as successfully generalising to polychromatic data. We demonstrate two uses of these neural network models, propagating seeing through the photonic lantern as well as performing global optimisation for purposes such as photonic lantern funnels and photonic lantern nullers. △ Less

Submitted 30 August, 2021; originally announced August 2021.

Comments: 20 pages, 14 figures

Journal ref: Journal of Astronomical Telescopes, Instruments, and Systems. 7(2) (2021) 1-20

All-fiber photonic lantern multimode optical receiver with coherent adaptive optics beam combining

Authors: Bo Zhang, Jianfeng Sun, Chenzhe Lao, Christopher H Betters, Alexander Argyros, Yu Zhou, Sergio G. Leon-Saval

Abstract: A multimode optical receiver for free space optical communications (FSOC) based on a photonic lantern and adaptive optics coherent beam combining (CBC) of the lantern's single-mode outputs is proposed and demonstrated for the first time. The use of optical coherent combining in fiber serves to increase the signal to noise ratio compared to similar receivers based on electrically combined signals,… ▽ More A multimode optical receiver for free space optical communications (FSOC) based on a photonic lantern and adaptive optics coherent beam combining (CBC) of the lantern's single-mode outputs is proposed and demonstrated for the first time. The use of optical coherent combining in fiber serves to increase the signal to noise ratio compared to similar receivers based on electrically combined signals, and represents an all-fiber approach to low-order adaptive optics. This optical receiver is demonstrated using a photonic lantern with three outputs, fibre couplers and active phase locking, and further investigated under atmospheric conditions with and without turbulence. △ Less

Submitted 20 May, 2021; originally announced May 2021.

Comments: Preliminary study and results - 7 pages, 6 figures

3D-M3: High-spatial resolution spectroscopy with extreme AO and 3D printed micro-lenslets

Authors: Theodoros Anagnos, Mareike Trappen, Blaise C. Kuo Tiong, Tobias Feger, Stephanos Yerolatsitis, Robert J. Harris, Julien Lozi, Nemanja Jovanovic, Tim A. Birks, Sébastien Vievard, Olivier Guyon, Itandehui Gris-Sánchez, Sergio G. Leon-Saval, Barnaby Norris, Sebastiaan Y. Haffert, Phillip Hottinger, Matthias Blaicher, Yilin Xu, Christopher H. Betters, Christian Koos, David W. Coutts, Christian Schwab, Andreas Quirrenbach

Abstract: By combining IFS with ExAO we are now able to resolve objects close to the diffraction-limit of large telescopes, exploring new science cases. We introduce an IFU designed to couple light with a minimal platescale from the SCExAO facility at NIR wavelengths to a SM spectrograph. The IFU has a 3D-printed MLA on top of a custom SM MCF, to optimize the coupling of light into the fiber cores. We demon… ▽ More By combining IFS with ExAO we are now able to resolve objects close to the diffraction-limit of large telescopes, exploring new science cases. We introduce an IFU designed to couple light with a minimal platescale from the SCExAO facility at NIR wavelengths to a SM spectrograph. The IFU has a 3D-printed MLA on top of a custom SM MCF, to optimize the coupling of light into the fiber cores. We demonstrate the potential of the instrument via initial results from the first on-sky runs at the 8.2 m Subaru Telescope with a spectrograph using off-the-shelf optics, allowing for rapid development with low cost. △ Less

Submitted 14 June, 2021; v1 submitted 12 May, 2021; originally announced May 2021.

An innovative integral field unit upgrade with 3D-printed micro-lenses for the RHEA at Subaru

Authors: Theodoros Anagnos, Pascal Maier, Philipp Hottinger, Chris Betters, Tobias Feger, Sergio G. Leon-Saval, Itandehui Gris-Sánchez, Stephanos Yerolatsitis, Julien Lozi, Tim A. Birks, Sebastian Vievard, Nemanja Jovanovic, Adam D. Rains, Michael J. Ireland, Robert J. Harris, Blaise C. Kuo Tiong, Olivier Guyon, Barnaby Norris, Sebastiaan Y. Haffert, Matthias Blaicher, Yilin Xu, Moritz Straub, Jörg-Uwe Pott, Oliver Sawodny, Philip L. Neureuther , et al. (4 additional authors not shown)

Abstract: In the new era of Extremely Large Telescopes (ELTs) currently under construction, challenging requirements drive spectrograph designs towards techniques that efficiently use a facility's light collection power. Operating in the single-mode (SM) regime, close to the diffraction limit, reduces the footprint of the instrument compared to a conventional high-resolving power spectrograph. The custom bu… ▽ More In the new era of Extremely Large Telescopes (ELTs) currently under construction, challenging requirements drive spectrograph designs towards techniques that efficiently use a facility's light collection power. Operating in the single-mode (SM) regime, close to the diffraction limit, reduces the footprint of the instrument compared to a conventional high-resolving power spectrograph. The custom built injection fiber system with 3D-printed micro-lenses on top of it for the replicable high-resolution exoplanet and asteroseismology spectrograph at Subaru in combination with extreme adaptive optics of SCExAO, proved its high efficiency in a lab environment, manifesting up to ~77% of the theoretical predicted performance. △ Less

Submitted 24 January, 2021; originally announced January 2021.

An all-photonic focal-plane wavefront sensor

Authors: Barnaby R. M. Norris, ** Wei, Christopher H. Betters, Alison Wong, Sergio G. Leon-Saval

Abstract: Adaptive optics (AO) is critical in astronomy, optical communications and remote sensing to deal with the rapid blurring caused by the Earth's turbulent atmosphere. But current AO systems are limited by their wavefront sensors, which need to be in an optical plane non-common to the science image and are insensitive to certain wavefront-error modes. Here we present a wavefront sensor based on a pho… ▽ More Adaptive optics (AO) is critical in astronomy, optical communications and remote sensing to deal with the rapid blurring caused by the Earth's turbulent atmosphere. But current AO systems are limited by their wavefront sensors, which need to be in an optical plane non-common to the science image and are insensitive to certain wavefront-error modes. Here we present a wavefront sensor based on a photonic lantern fibre-mode-converter and deep learning, which can be placed at the same focal plane as the science image, and is optimal for single-mode fibre injection. By measuring the intensities of an array of single-mode outputs, both phase and amplitude information on the incident wavefront can be reconstructed. We demonstrate the concept with simulations and an experimental realisation wherein Zernike wavefront errors are recovered from focal-plane measurements to a precision of $5.1\times10^{-3}\;π$ radians root-mean-squared-error. △ Less

Submitted 22 October, 2020; v1 submitted 11 March, 2020; originally announced March 2020.

Journal ref: Nat Commun 11, 5335 (2020)

A Multi-Core Fibre Photonic Lantern Based Spectrograph for Raman Spectroscopy

Authors: Christopher H. Betters, Joss Bland-Hawthorn, Salah Sukkarieh, Itandehui Gris-Sanchez, Sergio G. Leon-Saval

Abstract: We report on the development of a compact (volume $\approx$ 100\:cm$^3$), multimode diffraction-limited Raman spectrograph and probe designed to be compact as possible. The spectrograph uses `off the shelf' optics, a custom 3D-printed two-part housing and harnesses a multi-core fibre (MCF) photonic lantern (multimode to few-mode converter), which slices a large 40~\textmu m multimode input into a… ▽ More We report on the development of a compact (volume $\approx$ 100\:cm$^3$), multimode diffraction-limited Raman spectrograph and probe designed to be compact as possible. The spectrograph uses `off the shelf' optics, a custom 3D-printed two-part housing and harnesses a multi-core fibre (MCF) photonic lantern (multimode to few-mode converter), which slices a large 40~\textmu m multimode input into a near-diffraction-limited 6~\textmu m aperture. Our unique design utilises the hexagonal geometry of our MCF, permitting high multimode collection efficiency with near-diffraction-limited performance in a compact design. Our approach does not require a complex reformatter or mask and thus preserves spectral information and throughput when forming the entrance slit of the spectrograph. We demonstrate the technology over the interval 800~nm to 940~nm (200~cm$^{-1}$ to 2000~cm$^{-1}$) with a resolution of 0.3\:nm (4\:cm$^{-1}$), but other spectral regions and resolutions from the UV to the near infrared are also possible. We demonstrate the performance of our system by recording the Raman spectra of several compounds, including the pharmaceuticals paracetamol and ibuprofen. △ Less

Submitted 2 March, 2020; originally announced March 2020.

Comments: 4 pages; Accepted in IEEE Photonics Technology Letters

First demonstration of OH suppression in a high efficiency near-infrared spectrograph

Authors: S. C. Ellis, J. Bland-Hawthorn, J. S. Lawrence, A. J. Horton, R. Content, M. M. Roth, N. Pai, R. Zhelem, S. Case, E. Hernandez, S. G. Leon-Saval, R. Haynes, S. S. Min, D. Giannone, K. Madhav, A. Rahman, C. Betters, D. Haynes, W. Couch, L. J. Kewley, R. McDermid, L. Spitler, R. G. Sharp, S. Veilleux

Abstract: Ground-based near-infrared astronomy is severely hampered by the forest of atmospheric emission lines resulting from the rovibrational decay of OH molecules in the upper atmosphere. The extreme brightness of these lines, as well as their spatial and temporal variability, makes accurate sky subtraction difficult. Selectively filtering these lines with OH suppression instruments has been a long stan… ▽ More Ground-based near-infrared astronomy is severely hampered by the forest of atmospheric emission lines resulting from the rovibrational decay of OH molecules in the upper atmosphere. The extreme brightness of these lines, as well as their spatial and temporal variability, makes accurate sky subtraction difficult. Selectively filtering these lines with OH suppression instruments has been a long standing goal for near-infrared spectroscopy. We have shown previously the efficacy of fibre Bragg gratings combined with photonic lanterns for achieving OH suppression. Here we report on PRAXIS, a unique near-infrared spectrograph that is optimised for OH suppression with fibre Bragg gratings. We show for the first time that OH suppression (of any kind) is possible with high overall throughput (18 per cent end-to-end), and provide examples of the relative benefits of OH suppression. △ Less

Submitted 12 January, 2020; originally announced January 2020.

Comments: Accepted for publication in MNRAS

The SAMI Galaxy Survey: Data Release One with Emission-line Physics Value-Added Products

Authors: Andrew W. Green, Scott M. Croom, Nicholas Scott, Luca Cortese, Anne M. Medling, Francesco D'Eugenio, Julia J. Bryant, Joss Bland-Hawthorn, J. T. Allen, Rob Sharp, I-Ting Ho, Brent Groves, Michael J. Drinkwater, Elizabeth Mannering, Lloyd Harischandra, Jesse van de Sande, Adam D. Thomas, Simon O'Toole, Richard M. McDermid, Minh Vuong, Katrina Sealey, Amanda E. Bauer, S. Brough, Barbara Catinella, Gerald Cecil , et al. (26 additional authors not shown)

Abstract: We present the first major release of data from the SAMI Galaxy Survey. This data release focuses on the emission-line physics of galaxies. Data Release One includes data for 772 galaxies, about 20% of the full survey. Galaxies included have the redshift range 0.004 < z < 0.092, a large mass range (7.6 < log(Mstellar/M$_\odot$) < 11.6), and star-formation rates of 10^-4 to 10^1\ M$_\odot$/yr. For… ▽ More We present the first major release of data from the SAMI Galaxy Survey. This data release focuses on the emission-line physics of galaxies. Data Release One includes data for 772 galaxies, about 20% of the full survey. Galaxies included have the redshift range 0.004 < z < 0.092, a large mass range (7.6 < log(Mstellar/M$_\odot$) < 11.6), and star-formation rates of 10^-4 to 10^1\ M$_\odot$/yr. For each galaxy, we include two spectral cubes and a set of spatially resolved 2D maps: single- and multi-component emission-line fits (with dust extinction corrections for strong lines), local dust extinction and star-formation rate. Calibration of the fibre throughputs, fluxes and differential-atmospheric-refraction has been improved over the Early Data Release. The data have average spatial resolution of 2.16 arcsec (FWHM) over the 15~arcsec diameter field of view and spectral (kinematic) resolution R=4263 (sigma=30km/s) around Halpha. The relative flux calibration is better than 5\% and absolute flux calibration better than $\pm0.22$~mag, with the latter estimate limited by galaxy photometry. The data are presented online through the Australian Astronomical Observatory's Data Central. △ Less

Submitted 26 July, 2017; originally announced July 2017.

Comments: Submitted to MNRAS. SAMI DR1 data products available from http://datacentral.aao.gov.au/asvo/surveys/sami/

The Photonic Lantern

Authors: T. A. Birks, I. Gris-Sánchez, S. Yerolatsitis, S. G. Leon-Saval, R. R. Thomson

Abstract: Photonic lanterns are made by adiabatically merging several single-mode cores into one multimode core. They provide low-loss interfaces between single-mode and multimode systems where the precise optical map** between cores and individual modes is unimportant. Photonic lanterns are made by adiabatically merging several single-mode cores into one multimode core. They provide low-loss interfaces between single-mode and multimode systems where the precise optical map** between cores and individual modes is unimportant. △ Less

Submitted 11 March, 2015; v1 submitted 10 March, 2015; originally announced March 2015.

Comments: 45 pages; article unchanged, accepted for publication in Advances in Optics and Photonics

Journal ref: Adv. Opt. Photon. 7, 107-167 (2015)

The SAMI Galaxy Survey: instrument specification and target selection

Authors: J. J. Bryant, M. S. Owers, A. S. G. Robotham, S. M. Croom, S. P. Driver, M. J. Drinkwater, N. P. F. Lorente, L. Cortese, N. Scott, M. Colless, A. Schaefer, E. N. Taylor, I. S. Konstantopoulos, J. T. Allen, I. Baldry, L. Barnes, A. E. Bauer, J. Bland-Hawthorn, J. V. Bloom, A. M. Brooks, S. Brough, G. Cecil, W. Couch, D. Croton, R. Davies , et al. (32 additional authors not shown)

Abstract: The SAMI Galaxy Survey will observe 3400 galaxies with the Sydney-AAO Multi-object Integral-field spectrograph (SAMI) on the Anglo-Australian Telescope (AAT) in a 3-year survey which began in 2013. We present the throughput of the SAMI system, the science basis and specifications for the target selection, the survey observation plan and the combined properties of the selected galaxies. The survey… ▽ More The SAMI Galaxy Survey will observe 3400 galaxies with the Sydney-AAO Multi-object Integral-field spectrograph (SAMI) on the Anglo-Australian Telescope (AAT) in a 3-year survey which began in 2013. We present the throughput of the SAMI system, the science basis and specifications for the target selection, the survey observation plan and the combined properties of the selected galaxies. The survey includes four volume limited galaxy samples based on cuts in a proxy for stellar mass, along with low-stellar mass dwarf galaxies all selected from the Galaxy And Mass Assembly (GAMA) survey. The GAMA regions were selected because of the vast array of ancillary data available, including ultraviolet through to radio bands. These fields are on the celestial equator at 9, 12, and 14.5 hours, and cover a total of 144 square degrees (in GAMA-I). Higher density environments are also included with the addition of eight clusters. The clusters have spectroscopy from 2dFGRS and SDSS and photometry in regions covered by the Sloan Digital Sky Survey (SDSS) and/or VLT Survey Telescope/ATLAS. The aim is to cover a broad range in stellar mass and environment, and therefore the primary survey targets cover redshifts 0.004 < z < 0.095, magnitudes r$_{pet}$ < 19.4, stellar masses $10^{7} - 10^{12}$ M$_{sol}$, and environments from isolated field galaxies through groups to clusters of $10^{15}$ M$_{sol}$. △ Less

Submitted 17 February, 2015; v1 submitted 28 July, 2014; originally announced July 2014.

Comments: 19 figures; Published in MNRAS 447, 2857, 2015

Journal ref: MNRAS 447, 2857, 2015

The SAMI Galaxy Survey: Early Data Release

Authors: J. T. Allen, S. M. Croom, I. S. Konstantopoulos, J. J. Bryant, R. Sharp, G. N. Cecil, L. M. R. Fogarty, C. Foster, A. W. Green, I. -T. Ho, M. S. Owers, A. L. Schaefer, N. Scott, A. E. Bauer, I. Baldry, L. A. Barnes, J. Bland-Hawthorn, J. V. Bloom, S. Brough, M. Colless, L. Cortese, W. J. Couch, M. J. Drinkwater, S. P. Driver, M. Goodwin , et al. (23 additional authors not shown)

Abstract: We present the Early Data Release of the Sydney-AAO Multi-object Integral field spectrograph (SAMI) Galaxy Survey. The SAMI Galaxy Survey is an ongoing integral field spectroscopic survey of ~3400 low-redshift (z<0.12) galaxies, covering galaxies in the field and in groups within the Galaxy And Mass Assembly (GAMA) survey regions, and a sample of galaxies in clusters. In the Early Data Release,… ▽ More We present the Early Data Release of the Sydney-AAO Multi-object Integral field spectrograph (SAMI) Galaxy Survey. The SAMI Galaxy Survey is an ongoing integral field spectroscopic survey of ~3400 low-redshift (z<0.12) galaxies, covering galaxies in the field and in groups within the Galaxy And Mass Assembly (GAMA) survey regions, and a sample of galaxies in clusters. In the Early Data Release, we publicly release the fully calibrated datacubes for a representative selection of 107 galaxies drawn from the GAMA regions, along with information about these galaxies from the GAMA catalogues. All datacubes for the Early Data Release galaxies can be downloaded individually or as a set from the SAMI Galaxy Survey website. In this paper we also assess the quality of the pipeline used to reduce the SAMI data, giving metrics that quantify its performance at all stages in processing the raw data into calibrated datacubes. The pipeline gives excellent results throughout, with typical sky subtraction residuals in the continuum of 0.9-1.2 per cent, a relative flux calibration uncertainty of 4.1 per cent (systematic) plus 4.3 per cent (statistical), and atmospheric dispersion removed with an accuracy of 0."09, less than a fifth of a spaxel. △ Less

Submitted 30 September, 2014; v1 submitted 22 July, 2014; originally announced July 2014.

Comments: MNRAS accepted. 16 pages, 20 figures. Galaxy datacubes and related data available from http://sami-survey.org/edr . v2: Minor edits to match accepted version

Beating the classical limit: A diffraction-limited spectrograph for an arbitrary input beam

Authors: Christopher H. Betters, Sergio G. Leon-Saval, J. Gordon Robertson, Joss Bland-Hawthorn

Abstract: We demonstrate a new approach to classical fiber-fed spectroscopy. Our method is to use a photonic lantern that converts an arbitrary (e.g. incoherent) input beam into N diffraction-limited outputs. For the highest throughput, the number of outputs must be matched to the total number of unpolarized spatial modes on input. This approach has many advantages: (i) after the lantern, the instrument is… ▽ More We demonstrate a new approach to classical fiber-fed spectroscopy. Our method is to use a photonic lantern that converts an arbitrary (e.g. incoherent) input beam into N diffraction-limited outputs. For the highest throughput, the number of outputs must be matched to the total number of unpolarized spatial modes on input. This approach has many advantages: (i) after the lantern, the instrument is constructed from 'commercial off the shelf' components; (ii) the instrument is the minimum size and mass configuration at a fixed resolving power and spectral order (~shoebox sized in this case); (iii) the throughput is better than 60% (slit to detector, including detector QE of ~80%); (iv) the scattered light at the detector can be less than 0.1% (total power). Our first implementation operates over 1545-1555 nm (limited by the detector, a 640$\times$512 array with 20$μ$m pitch) with a spectral resolution of 0.055nm (R~30,000) using a 1$\times$7 (1 multi-mode input to 7 single-mode outputs) photonic lantern. This approach is a first step towards a fully integrated, multimode photonic microspectrograph. △ Less

Submitted 17 October, 2013; originally announced October 2013.

Comments: 10 pages, 3 figures, accepted for publication in Opt. Express

Journal ref: Optics Express, Vol. 21, Issue 22, pp. 26103-26112 (2013)

The nature of the near-infrared interline sky background using fibre Bragg grating OH suppression

Authors: Christopher Q. Trinh, Simon C. Ellis, Joss Bland-Hawthorn, Anthony J. Horton, Jon S. Lawrence, Sergio G. Leon-Saval

Abstract: We analyse the near-infrared interline sky background, OH and O2 emission in 19 hours of H band observations with the GNOSIS OH suppression unit and the IRIS2 spectrograph at the 3.9-m AAT. We find that the temporal behaviour of OH emission is best described by a gradual decrease during the first half of the night followed by a gradual increase during the second half of the night following the beh… ▽ More We analyse the near-infrared interline sky background, OH and O2 emission in 19 hours of H band observations with the GNOSIS OH suppression unit and the IRIS2 spectrograph at the 3.9-m AAT. We find that the temporal behaviour of OH emission is best described by a gradual decrease during the first half of the night followed by a gradual increase during the second half of the night following the behaviour of the solar elevation angle. We measure the interline background at 1.520 microns where the instrumental thermal background is very low and study its variation with zenith distance, time after sunset, ecliptic latitude, lunar zenith angle and lunar distance to determine the presence of non-thermal atmospheric emission, zodiacal scattered light and scattered moonlight. Zodiacal scattered light is too faint to be detected in the summed observations. Scattered moonlight due to Mie scattering by atmospheric aerosols is seen at small lunar distances (< 11 deg), but is otherwise too faint to detect. Except at very small lunar distances the interline background at a resolving power of R~2400 when using OH suppression fibres is dominated by a non-thermal atmospheric source with a temporal behaviour that resembles atmospheric OH emission suggesting that the interline background contains instrumentally-scattered OH. However, the interline background dims more rapidly than OH early in the night suggesting contributions from rapid dimming molecules. The absolute interline background is 560 +/- 120 photons s^-1 m^-2 micron^-1 arcsec^-2 under dark conditions. This value is similar to previous measurements without OH suppression suggesting that non-suppressed atmospheric emission is responsible for the interline background. Future OH suppression fibre designs may address this by the suppression of more sky lines using more accurate sky line measurements taken from high resolution spectra. △ Less

Submitted 11 April, 2013; v1 submitted 2 January, 2013; originally announced January 2013.

Comments: 17 pages, 12 figures, submitted to MNRAS

Single mode, extreme precision Doppler spectrographs

Authors: Christian Schwab, Sergio G. Leon-Saval, Christopher H. Betters, Joss Bland-Hawthorn, Suvrath Mahadevan

Abstract: The 'holy grail' of exoplanet research today is the detection of an earth-like planet: a rocky planet in the habitable zone around a main-sequence star. Extremely precise Doppler spectroscopy is an indispensable tool to find and characterize earth-like planets; however, to find these planets around solar-type stars, we need nearly one order of magnitude better radial velocity (RV) precision than t… ▽ More The 'holy grail' of exoplanet research today is the detection of an earth-like planet: a rocky planet in the habitable zone around a main-sequence star. Extremely precise Doppler spectroscopy is an indispensable tool to find and characterize earth-like planets; however, to find these planets around solar-type stars, we need nearly one order of magnitude better radial velocity (RV) precision than the best current spectrographs provide. Recent developments in astrophotonics (Bland-Hawthorn & Horton 2006, Bland-Hawthorn et al. 2010) and adaptive optics (AO) enable single mode fiber (SMF) fed, high resolution spectrographs, which can realize the next step in precision. SMF feeds have intrinsic advantages over multimode fiber or slit coupled spectrographs: The intensity distribution at the fiber exit is extremely stable, and as a result the line spread function of a well-designed spectrograph is fully decoupled from input coupling conditions, like guiding or seeing variations (Ihle et al. 2010). Modal noise, a limiting factor in current multimode fiber fed instruments (Baudrand & Walker 2001), can be eliminated by proper design, and the diffraction limited input to the spectrograph allows for very compact instrument designs, which provide excellent optomechanical stability. A SMF is the ideal interface for new, very precise wavelength calibrators, like laser frequency combs (Steinmetz et al. 2008, Osterman et al. 2012), or SMF based Fabry-Perot Etalons (Halverson et al. 2012). At near infrared wavelengths, these technologies are ready to be implemented in on-sky instruments, or already in use. We discuss a novel concept for such a spectrograph. △ Less

Submitted 19 December, 2012; originally announced December 2012.

Comments: IAU Proceedings, General Assembly 2012. 4 pages

GNOSIS: the first instrument to use fibre Bragg gratings for OH suppression

Authors: Christopher Q. Trinh, Simon C. Ellis, Joss Bland-Hawthorn, Jon S. Lawrence, Anthony J. Horton, Sergio G. Leon-Saval, Keith Shortridge, Julia Bryant, Scott Case, Matthew Colless, Warick Couch, Kenneth Freeman, Hans-Gerd Loehmannsroeben, Luke Gers, Karl Glazebrook, Roger Haynes, Steve Lee, John O'Byrne, Stan Miziarski, Martin M. Roth, Brian Schmidt, Christopher G. Tinney, Jessica Zheng

Abstract: GNOSIS is a prototype astrophotonic instrument that utilizes OH suppression fibres consisting of fibre Bragg gratings and photonic lanterns to suppress the 103 brightest atmospheric emission doublets between 1.47-1.7 microns. GNOSIS was commissioned at the 3.9-meter Anglo-Australian Telescope with the IRIS2 spectrograph to demonstrate the potential of OH suppression fibres, but may be potentially… ▽ More GNOSIS is a prototype astrophotonic instrument that utilizes OH suppression fibres consisting of fibre Bragg gratings and photonic lanterns to suppress the 103 brightest atmospheric emission doublets between 1.47-1.7 microns. GNOSIS was commissioned at the 3.9-meter Anglo-Australian Telescope with the IRIS2 spectrograph to demonstrate the potential of OH suppression fibres, but may be potentially used with any telescope and spectrograph combination. Unlike previous atmospheric suppression techniques GNOSIS suppresses the lines before dispersion and in a manner that depends purely on wavelength. We present the instrument design and report the results of laboratory and on-sky tests from commissioning. While these tests demonstrated high throughput and excellent suppression of the skylines by the OH suppression fibres, surprisingly GNOSIS produced no significant reduction in the interline background and the sensitivity of GNOSIS and IRIS2 is about the same as IRIS2. It is unclear whether the lack of reduction in the interline background is due to physical sources or systematic errors as the observations are detector noise-dominated. OH suppression fibres could potentially impact ground-based astronomy at the level of adaptive optics or greater. However, until a clear reduction in the interline background and the corresponding increasing in sensitivity is demonstrated optimized OH suppression fibres paired with a fibre-fed spectrograph will at least provide a real benefits at low resolving powers. △ Less

Submitted 11 April, 2013; v1 submitted 5 December, 2012; originally announced December 2012.

Comments: 15 pages, 13 figures, accepted to AJ

First Science with SAMI: A Serendipitously Discovered Galactic Wind in ESO 185-G031

Authors: Lisa M. R. Fogarty, Joss Bland-Hawthorn, Scott M. Croom, Andrew W. Green, Julia J. Bryant, Jon S. Lawrence, Samuel Richards, James T. Allen, Amanda E. Bauer, Michael N. Birchall, Sarah Brough, Matthew Colless, Simon C. Ellis, Tony Farrell, Michael Goodwin, Ron Heald, Andrew M. Hopkins, Anthony Horton, D. Heath Jones, Steve Lee, Geraint Lewis, Ángel R. López-Sánchez, Stan Miziarski, Holly Trowland, Sergio G. Leon-Saval , et al. (5 additional authors not shown)

Abstract: We present the first scientific results from the Sydney-AAO Multi-Object IFS (SAMI) at the Anglo-Australian Telescope. This unique instrument deploys 13 fused fibre bundles (hexabundles) across a one-degree field of view allowing simultaneous spatially-resolved spectroscopy of 13 galaxies. During the first SAMI commissioning run, targeting a single galaxy field, one object (ESO 185-G031) was found… ▽ More We present the first scientific results from the Sydney-AAO Multi-Object IFS (SAMI) at the Anglo-Australian Telescope. This unique instrument deploys 13 fused fibre bundles (hexabundles) across a one-degree field of view allowing simultaneous spatially-resolved spectroscopy of 13 galaxies. During the first SAMI commissioning run, targeting a single galaxy field, one object (ESO 185-G031) was found to have extended minor axis emission with ionisation and kinematic properties consistent with a large-scale galactic wind. The importance of this result is two-fold: (i) fibre bundle spectrographs are able to identify low-surface brightness emission arising from extranuclear activity; (ii) such activity may be more common than presently assumed because conventional multi-object spectrographs use single-aperture fibres and spectra from these are nearly always dominated by nuclear emission. These early results demonstrate the extraordinary potential of multi-object hexabundle spectroscopy in future galaxy surveys. △ Less

Submitted 1 November, 2012; originally announced November 2012.

Comments: 12 pages, 14 figures, accepted for publication in ApJ 01/Nov/2012

The Photonic TIGER: a multicore fiber-fed spectrograph

Authors: Sergio G. Leon-Saval, Christopher H. Betters, Joss Bland-Hawthorn

Abstract: We present a proof of concept compact diffraction limited high-resolution fiber-fed spectrograph by using a 2D multicore array input. This high resolution spectrograph is fed by a 2D pseudo-slit, the Photonic TIGER, a hexagonal array of near-diffraction limited single-mode cores. We study the feasibility of this new platform related to the core array separation and rotation with respect to the dis… ▽ More We present a proof of concept compact diffraction limited high-resolution fiber-fed spectrograph by using a 2D multicore array input. This high resolution spectrograph is fed by a 2D pseudo-slit, the Photonic TIGER, a hexagonal array of near-diffraction limited single-mode cores. We study the feasibility of this new platform related to the core array separation and rotation with respect to the dispersion axis. A 7 core compact Photonic TIGER fiber-fed spectrograph with a resolving power of around R~31000 and 8 nm bandwidth in the IR centered on 1550 nm is demonstrated. We also describe possible architectures based on this concept for building small scale compact diffraction limited Integral Field Spectrographs (IFS). △ Less

Submitted 14 August, 2012; originally announced August 2012.

Comments: 8 pages, 6 figures, SPIE Astronomical Telescopes and Instrumentation 8450-54

Suppression of the near-infrared OH night sky lines with fibre Bragg gratings - first results

Authors: S. C. Ellis, J. Bland-Hawthorn, J. Lawrence, A. J. Horton, C. Trinh, S. G. Leon-Saval, K. Shortridge, J. Bryant, S. Case, M. Colless, W. Couch, K. Freeman, L. Gers, K. Glazebrook, R. Haynes, S. Lee, H. -G. Loehmannsroeben, J. O. Byrne, S. Miziarski, M. Roth, B. Schmidt, C. G. Tinney, J. Zheng

Abstract: The background noise between 1 and 1.8 microns in ground-based instruments is dominated by atmospheric emission from hydroxyl molecules. We have built and commissioned a new instrument, GNOSIS, which suppresses 103 OH doublets between 1.47 - 1.7 microns by a factor of ~1000 with a resolving power of ~10,000. We present the first results from the commissioning of GNOSIS using the IRIS2 spectrograph… ▽ More The background noise between 1 and 1.8 microns in ground-based instruments is dominated by atmospheric emission from hydroxyl molecules. We have built and commissioned a new instrument, GNOSIS, which suppresses 103 OH doublets between 1.47 - 1.7 microns by a factor of ~1000 with a resolving power of ~10,000. We present the first results from the commissioning of GNOSIS using the IRIS2 spectrograph at the AAT. The combined throughput of the GNOSIS fore-optics, grating unit and relay optics is ~36 per cent, but this could be improved to ~46 per cent with a more optimal design. We measure strong suppression of the OH lines, confirming that OH suppression with fibre Bragg gratings will be a powerful technology for low resolution spectroscopy. The integrated OH suppressed background between 1.5 and 1.7 microns is reduced by a factor of 9 compared to a control spectrum using the same system without suppression. The potential of low resolution OH suppressed spectroscopy is illustrated with example observations. The GNOSIS background is dominated by detector dark current below 1.67 microns and by thermal emission above 1.67 microns. After subtracting these we detect an unidentified residual interline component of ~ 860 +/ 210 ph/s/m^2/micron/arcsec^2. This component is equally bright in the suppressed and control spectra. We have investigated the possible source of the interline component, but were unable to discriminate between a possible instrumental artifact and intrinsic atmospheric emission. Resolving the source of this emission is crucial for the design of fully optimised OH suppression spectrographs. The next generation OH suppression spectrograph will be focussed on resolving the source of the interline component, taking advantage of better optimisation for a FBG feed. We quantify the necessary improvements for an optimal OH suppressing fibre spectrograph design. △ Less

Submitted 27 June, 2012; originally announced June 2012.

Comments: Accepted for publication in MNRAS. 15 pages, 18 figures

A complex multi-notch astronomical filter to suppress the bright infrared sky

Authors: J. Bland-Hawthorn, S. C. Ellis, S. G. Leon-Saval, R. Haynes, M. M. Roth, H. -G. Löhmannsröben, A. J. Horton, J. -G. Cuby, T. A. Birks, J. S. Lawrence, P. Gillingham, S. D. Ryder, C. Trinh

Abstract: A long-standing and profound problem in astronomy is the difficulty in obtaining deep near-infrared observations due to the extreme brightness and variability of the night sky at these wavelengths. A solution to this problem is crucial if we are to obtain the deepest possible observations of the early Universe since redshifted starlight from distant galaxies appears at these wavelengths. The atmos… ▽ More A long-standing and profound problem in astronomy is the difficulty in obtaining deep near-infrared observations due to the extreme brightness and variability of the night sky at these wavelengths. A solution to this problem is crucial if we are to obtain the deepest possible observations of the early Universe since redshifted starlight from distant galaxies appears at these wavelengths. The atmospheric emission between 1000 nm and 1800 nm arises almost entirely from a forest of extremely bright, very narrow hydroxyl emission lines that varies on timescales of minutes. The astronomical community has long envisaged the prospect of selectively removing these lines, while retaining high throughput between the lines. Here we demonstrate such a filter for the first time, presenting results from the first on-sky tests. Its use on current 8m telescopes and future 30m telescopes will open up many new research avenues in the years to come. △ Less

Submitted 7 December, 2011; originally announced December 2011.

Comments: 15 pages, 5 figures. Nature Communications. Published 06 December 2011

Journal ref: Nature Communications, 2, 581 2011

Characterization of hexabundles: Initial results

Authors: J. J. Bryant, J. W. O'Byrne, J. Bland-Hawthorn, S. G. Leon-Saval

Abstract: New multi-core imaging fibre bundles -- hexabundles -- being developed at the University of Sydney will provide simultaneous integral field spectroscopy for hundreds of celestial sources across a wide angular field. These are a natural progression from the use of single fibres in existing galaxy surveys. Hexabundles will allow us to address fundamental questions in astronomy without the biases int… ▽ More New multi-core imaging fibre bundles -- hexabundles -- being developed at the University of Sydney will provide simultaneous integral field spectroscopy for hundreds of celestial sources across a wide angular field. These are a natural progression from the use of single fibres in existing galaxy surveys. Hexabundles will allow us to address fundamental questions in astronomy without the biases introduced by a fixed entrance aperture. We have begun to consider instrument concepts that exploit hundreds of hexabundles over the widest possible field of view. To this end, we have compared the performance of a 61-core fully-fused hexabundle and 5 lightly-fused bundles with 7 cores each. All fibres in the bundles have 100 micron cores. In the fully-fused bundle, the cores are distorted from a circular shape in order to achieve a higher fill fraction. The lightly-fused bundles have circular cores and five different cladding thicknesses which affect the fill fraction. We compare the optical performance of all 6 bundles and find that the advantage of smaller interstitial holes (higher fill fraction) is outweighed by the increase in modal coupling, cross-talk and the poor optical performance caused by the deformation of the fibre cores. Uniformly high throughput and low cross-talk are essential for imaging faint astronomical targets with sufficient resolution to disentangle the dynamical structure. Devices already under development will have between 100 and 200 lightly-fused cores, although larger formats are feasible. The light-weight packaging of hexabundles is sufficiently flexible to allow existing robotic positioners to make use of them. △ Less

Submitted 5 April, 2011; originally announced April 2011.

Comments: Accepted for publication in MNRAS. See also a complimentary paper on the development of hexabundles - Bland-Hawthorn et al. 2011, Optics Express, vol. 19, p. 2649 (http://www.opticsinfobase.org/abstract.cfm?URI=oe-19-3-2649)