-
Laboratory demonstration of a Photonic Lantern Nuller in monochromatic and broadband light
Authors:
Yinzi Xin,
Daniel Echeverri,
Nemanja Jovanovic,
Dimitri Mawet,
Sergio Leon-Saval,
Rodrigo Amezcua-Correa,
Stephanos Yerolatsitis,
Michael P. Fitzgerald,
Pradip Gatkine,
Yoo Jung Kim,
Jonathan Lin,
Barnaby Norris,
Garreth Ruane,
Steph Sallum
Abstract:
Photonic lantern nulling (PLN) is a method for enabling the detection and characterization of close-in exoplanets by exploiting the symmetries of the ports of a mode-selective photonic lantern (MSPL) to cancel out starlight. A six-port MSPL provides four ports where on-axis starlight is suppressed, while off-axis planet light is coupled with efficiencies that vary as a function of the planet's spa…
▽ More
Photonic lantern nulling (PLN) is a method for enabling the detection and characterization of close-in exoplanets by exploiting the symmetries of the ports of a mode-selective photonic lantern (MSPL) to cancel out starlight. A six-port MSPL provides four ports where on-axis starlight is suppressed, while off-axis planet light is coupled with efficiencies that vary as a function of the planet's spatial position. We characterize the properties of a six-port MSPL in the laboratory and perform the first testbed demonstration of the PLN in monochromatic light (1569 nm) and in broadband light (1450 nm to 1625 nm), each using two orthogonal polarizations. We compare the measured spatial throughput maps with those predicted by simulations using the lantern's modes. We find that the morphologies of the measured throughput maps are reproduced by the simulations, though the real lantern is lossy and has lower throughputs overall. The measured ratios of on-axis stellar leakage to peak off-axis throughput are around 10^(-2), likely limited by testbed wavefront errors. These null-depths are already sufficient for observing young gas giants at the diffraction limit using ground-based observatories. Future work includes using wavefront control to further improve the nulls, as well as testing and validating the PLN on-sky.
△ Less
Submitted 1 April, 2024;
originally announced April 2024.
-
Coherent Imaging with Photonic Lanterns
Authors:
Yoo Jung Kim,
Michael P. Fitzgerald,
Jonathan Lin,
Steph Sallum,
Yinzi Xin,
Nemanja Jovanovic,
Sergio Leon-Saval
Abstract:
Photonic Lanterns (PLs) are tapered waveguides that gradually transition from a multi-mode fiber geometry to a bundle of single-mode fibers (SMFs). They can efficiently couple multi-mode telescope light into a multi-mode fiber entrance at the focal plane and convert it into multiple single-mode beams. Thus, each SMF samples its unique mode (lantern principal mode) of the telescope light in the pup…
▽ More
Photonic Lanterns (PLs) are tapered waveguides that gradually transition from a multi-mode fiber geometry to a bundle of single-mode fibers (SMFs). They can efficiently couple multi-mode telescope light into a multi-mode fiber entrance at the focal plane and convert it into multiple single-mode beams. Thus, each SMF samples its unique mode (lantern principal mode) of the telescope light in the pupil, analogous to subapertures in aperture masking interferometry (AMI). Coherent imaging with PLs can be enabled by interfering SMF outputs and applying phase modulation, which can be achieved using a photonic chip beam combiner at the backend (e.g., the ABCD beam combiner). In this study, we investigate the potential of coherent imaging by interfering SMF outputs of a PL with a single telescope. We demonstrate that the visibilities that can be measured from a PL are mutual intensities incident on the pupil weighted by the cross-correlation of a pair of lantern modes. From numerically simulated lantern principal modes of a 6-port PL, we find that interferometric observables using a PL behave similarly to separated-aperture visibilities for simple models on small angular scales ($<λ/D$) but with greater sensitivity to symmetries and capability to break phase angle degeneracies. Furthermore, we present simulated observations with wavefront errors and compare them to AMI. Despite the redundancy caused by extended lantern principal modes, spatial filtering offers stability to wavefront errors. Our simulated observations suggest that PLs may offer significant benefits in the photon noise-limited regime and in resolving small angular scales at low contrast regime.
△ Less
Submitted 12 February, 2024;
originally announced February 2024.
-
Real-time experimental demonstrations of a photonic lantern wavefront sensor
Authors:
Jonathan W. Lin,
Michael P. Fitzgerald,
Yinzi Xin,
Yoo Jung Kim,
Olivier Guyon,
Barnaby Norris,
Christopher Betters,
Sergio Leon-Saval,
Kyohoon Ahn,
Vincent Deo,
Julien Lozi,
Sébastien Vievard,
Daniel Levinstein,
Steph Sallum,
Nemanja Jovanovic
Abstract:
The direct imaging of an Earth-like exoplanet will require sub-nanometric wavefront control across large light-collecting apertures, to reject host starlight and detect the faint planetary signal. Current adaptive optics (AO) systems, which use wavefront sensors that reimage the telescope pupil, face two challenges that prevent this level of control: non-common-path aberrations (NCPAs), caused by…
▽ More
The direct imaging of an Earth-like exoplanet will require sub-nanometric wavefront control across large light-collecting apertures, to reject host starlight and detect the faint planetary signal. Current adaptive optics (AO) systems, which use wavefront sensors that reimage the telescope pupil, face two challenges that prevent this level of control: non-common-path aberrations (NCPAs), caused by differences between the sensing and science arms of the instrument; and petaling modes: discontinuous phase aberrations caused by pupil fragmentation, especially relevant for the upcoming 30-m class telescopes. Such aberrations drastically impact the capabilities of high-contrast instruments. To address these issues, we can add a second-stage wavefront sensor to the science focal plane. One promising architecture uses the photonic lantern (PL): a waveguide that efficiently couples aberrated light into single-mode fibers (SMFs). In turn, SMF-confined light can be stably injected into high-resolution spectrographs, enabling direct exoplanet characterization and precision radial velocity measurements; simultaneously, the PL can be used for focal-plane wavefront sensing. We present a real-time experimental demonstration of the PL wavefront sensor on the Subaru/SCExAO testbed. Our system is stable out to around ~400 nm of low-order Zernike wavefront error, and can correct petaling modes. When injecting ~30 nm RMS of low order time-varying error, we achieve ~10x rejection at 1 s timescales; further refinements to the control law and lantern fabrication process should make sub-nanometric wavefront control possible. In the future, novel sensors like the PLWFS may prove to be critical in resolving the wavefront control challenges posed by exoplanet direct imaging.
△ Less
Submitted 20 December, 2023;
originally announced December 2023.
-
Spectroastrometry and Imaging Science with Photonic Lanterns on Extremely Large Telescopes
Authors:
Yoo Jung Kim,
Michael P. Fitzgerald,
Jonathan Lin,
Steph Sallum,
Yinzi Xin,
Nemanja Jovanovic,
Sergio Leon-Saval,
Christopher Betters,
Pradip Gatkine,
Olivier Guyon,
Julien Lozi,
Dimitri Mawet,
Barnaby Norris,
Sébastien Vievard
Abstract:
Photonic lanterns (PLs) are tapered waveguides that gradually transition from a multi-mode fiber geometry to a bundle of single-mode fibers. In astronomical applications, PLs can efficiently couple multi-mode telescope light into a multi-mode fiber entrance and convert it into multiple single-mode beams. The output beams are highly stable and suitable for feeding into high-resolution spectrographs…
▽ More
Photonic lanterns (PLs) are tapered waveguides that gradually transition from a multi-mode fiber geometry to a bundle of single-mode fibers. In astronomical applications, PLs can efficiently couple multi-mode telescope light into a multi-mode fiber entrance and convert it into multiple single-mode beams. The output beams are highly stable and suitable for feeding into high-resolution spectrographs or photonic chip beam combiners. For instance, by using relative intensities in the output cores as a function of wavelength, PLs can enable spectroastrometry. In addition, by interfering beams in the output cores with a beam combiner in the backend, PLs can be used for high-throughput interferometric imaging. When used on an Extremely Large Telescope (ELT), with its increased sensitivity and angular resolution, the imaging and spectroastrometric capabilities of PLs will be extended to higher contrast and smaller angular scales. We study the potential spectroastrometry and imaging science cases of PLs on ELTs, including study of exomoons, broad-line regions of quasars, and inner circumstellar disks.
△ Less
Submitted 30 November, 2023;
originally announced December 2023.
-
Demonstration of a photonic lantern focal-plane wavefront sensor: measurement of atmospheric wavefront error modes and low wind effect in the non-linear regime
Authors:
** Wei,
Barnaby Norris,
Christopher Betters,
Sergio Leon-Saval
Abstract:
Here we present a laboratory analysis of the use of a 19-core photonic lantern (PL) in combination with neural network (NN) algorithms as an efficient focal plane wavefront sensor (FP-WFS) for adaptive optics (AO), measuring wavefront errors such as low wind effect (LWE), Zernike modes and Kolmogorov phase maps. The aberrated wavefronts were experimentally simulated using a Spatial Light Modulator…
▽ More
Here we present a laboratory analysis of the use of a 19-core photonic lantern (PL) in combination with neural network (NN) algorithms as an efficient focal plane wavefront sensor (FP-WFS) for adaptive optics (AO), measuring wavefront errors such as low wind effect (LWE), Zernike modes and Kolmogorov phase maps. The aberrated wavefronts were experimentally simulated using a Spatial Light Modulator (SLM) with combinations of different phase maps in both the linear regime (average incident RMS wavefront error (WFE) of 0.88 rad) and in the non-linear regime (average incident RMS WFE of 1.5 rad). Results were analysed using a NN to determine the transfer function of the relationship between the incident wavefront error (WFE) at the input modes at the multimode input of the PL and the intensity distribution output at the multicore fibre outputs end of the PL. The root mean square error (RMSE) of the reconstruction of petal and LWE modes were just $2.87\times10^{-2}$ rad and $2.07\times10^{-1}$ rad respectively, in the non-linear regime. The reconstruction RMSE for Zernike combinations ranged from $5.67\times10^{-2}$ rad to $8.43\times10^{-1}$ rad, depending on the number of Zernike terms and incident RMS WFE employed. These results demonstrate the promising potential of PLs as an innovative FP-WFS in conjunction with NNs.
△ Less
Submitted 3 November, 2023;
originally announced November 2023.
-
Focal-plane wavefront sensing with photonic lanterns II: numerical characterization and optimization
Authors:
Jonathan Lin,
Michael P. Fitzgerald,
Yinzi Xin,
Yoo Jung Kim,
Olivier Guyon,
Sergio Leon-Saval,
Barnaby Norris,
Nemanja Jovanovic
Abstract:
We present numerical characterizations of the wavefront sensing performance for few-mode photonic lantern wavefront sensors (PLWFSs). These characterizations include calculations of throughput, control space, sensor linearity, and an estimate of maximum linear reconstruction range for standard and hybrid lanterns with 3 to 19 ports, at a wavelength of 1550 nm. We additionally consider the impact o…
▽ More
We present numerical characterizations of the wavefront sensing performance for few-mode photonic lantern wavefront sensors (PLWFSs). These characterizations include calculations of throughput, control space, sensor linearity, and an estimate of maximum linear reconstruction range for standard and hybrid lanterns with 3 to 19 ports, at a wavelength of 1550 nm. We additionally consider the impact of beam-sha** optics and a charge-1 vortex mask, placed in the pupil plane. The former is motivated by the application of PLs to high-resolution spectroscopy, which could enable efficient injection into the spectrometer along with simultaneous focal-plane wavefront sensing; similarly, the latter is motivated by the application of PLs to vortex fiber nulling (VFN), which can simultaneously enable wavefront sensing and the nulling of on-axis starlight. Overall, we find that the PLWFS setups tested in this work exhibit good linearity out to ~0.25-0.5 radians of RMS wavefront error (WFE). Meanwhile, we estimate the maximum amount of WFE that can be handled by these sensors, before the sensor response becomes degenerate, to be around ~1-2 radians RMS. In the future, we expect these limits can be pushed further by increasing the number of degrees of freedom, either by adopting higher-mode-count lanterns, dispersing lantern outputs, or separating polarizations. Lastly, we consider optimization strategies for the design of the PLWFS, which involve both modification of the lantern itself and the use of pre- and post-lantern optics like phase masks and interferometric beam recombiners.
△ Less
Submitted 2 November, 2023;
originally announced November 2023.
-
The path to detecting extraterrestrial life with astrophotonics
Authors:
Nemanja Jovanovic,
Yinzi Xin,
Michael P. Fitzgerald,
Olivier Guyon,
Peter Tuthill,
Barnaby Norris,
Pradip Gatkine,
Greg Sercel,
Svarun Soda,
Yoo Jung Kim,
Jonathan Lin,
Sergio Leon-Saval,
Rodrigo Amezcua-Correa,
Stephanos Yerolatsitis,
Julien Lozi,
Sebastien Vievard,
Chris Betters,
Steph Sallum,
Daniel Levinstein,
Dimitri Mawet,
Jeffrey Jewell,
J. Kent Wallace,
Nick Cvetojevic
Abstract:
Astrophysical research into exoplanets has delivered thousands of confirmed planets orbiting distant stars. These planets span a wide ranges of size and composition, with diversity also being the hallmark of system configurations, the great majority of which do not resemble our own solar system. Unfortunately, only a handful of the known planets have been characterized spectroscopically thus far,…
▽ More
Astrophysical research into exoplanets has delivered thousands of confirmed planets orbiting distant stars. These planets span a wide ranges of size and composition, with diversity also being the hallmark of system configurations, the great majority of which do not resemble our own solar system. Unfortunately, only a handful of the known planets have been characterized spectroscopically thus far, leaving a ga** void in our understanding of planetary formation processes and planetary types. To make progress, astronomers studying exoplanets will need new and innovative technical solutions. Astrophotonics -- an emerging field focused on the application of photonic technologies to observational astronomy -- provides one promising avenue forward. In this paper we discuss various astrophotonic technologies that could aid in the detection and subsequent characterization of planets and in particular themes leading towards the detection of extraterrestrial life.
△ Less
Submitted 15 September, 2023;
originally announced September 2023.
-
Photonic spectro-interferometry with SCExAO/FIRST at the Subaru Telescope: towards H-alpha imaging of protoplanets
Authors:
Sébastien Vievard,
Manon Lallement,
Elsa Huby,
Sylvestre Lacour,
Olivier Guyon,
Nemanja Jovanovic,
Sergio Leon-saval,
Julien Lozi,
Vincent Deo,
Kyohoon Ahn,
Nick Cvetojevic,
Kevin Barjot,
Guillermo Martin,
Harry-Dean Kenchington-Goldsmith,
Gaspard Duchêne,
Takayuki Kotani,
Franck Marchis,
Daniel Rouan,
Michael Fitzgerald,
Steph Sallum,
Barnaby Norris,
Chris Betters,
Pradip Gatkine,
John Lin,
Yoo Jung Kim
, et al. (5 additional authors not shown)
Abstract:
FIRST is a post Extreme Adaptive-Optics (ExAO) spectro-interferometer operating in the Visible (600-800 nm, R~400). Its exquisite angular resolution (a sensitivity analysis of on-sky data shows that bright companions can be detected down to 0.25lambda/D) combined with its sensitivity to pupil phase discontinuities (from a few nm up to dozens of microns) makes FIRST an ideal self-calibrated solutio…
▽ More
FIRST is a post Extreme Adaptive-Optics (ExAO) spectro-interferometer operating in the Visible (600-800 nm, R~400). Its exquisite angular resolution (a sensitivity analysis of on-sky data shows that bright companions can be detected down to 0.25lambda/D) combined with its sensitivity to pupil phase discontinuities (from a few nm up to dozens of microns) makes FIRST an ideal self-calibrated solution for enabling exoplanet detection and characterization in the future. We present the latest on-sky results along with recent upgrades, including the integration and on-sky test of a new spectrograph (R~3,600) optimized for the detection of H-alpha emission from young exoplanets accreting matter.
△ Less
Submitted 28 August, 2023;
originally announced August 2023.
-
Achromatic design of a photonic tricoupler and phase shifter for broadband nulling interferometry
Authors:
Teresa Klinner-Teo,
Marc-Antoine Martinod,
Peter Tuthill,
Simon Gross,
Barnaby Norris,
Sergio Leon-Saval
Abstract:
Nulling interferometry is one of the most promising technologies for imaging exoplanets within stellar habitable zones. The use of photonics for carrying out nulling interferometry enables the contrast and separation required for exoplanet detection. So far, two key issues limiting current-generation photonic nullers have been identified: phase variations and chromaticity within the beam combiner.…
▽ More
Nulling interferometry is one of the most promising technologies for imaging exoplanets within stellar habitable zones. The use of photonics for carrying out nulling interferometry enables the contrast and separation required for exoplanet detection. So far, two key issues limiting current-generation photonic nullers have been identified: phase variations and chromaticity within the beam combiner. The use of tricouplers addresses both limitations, delivering a broadband, achromatic null together with phase measurements for fringe tracking. Here, we present a derivation of the transfer matrix of the tricoupler, including its chromatic behaviour, and our 3D design of a fully symmetric tricoupler, built upon a previous design proposed for the GLINT instrument. It enables a broadband null with symmetric, baseline-phase-dependent splitting into a pair of bright channels when inputs are in anti-phase. Within some design trade space, either the science signal or the fringe tracking ability can be prioritised. We also present a tapered-waveguide $180^\circ$-phase shifter with a phase variation of $0.6^\circ$ in the $1.4-1.7~μ$m band, producing a near-achromatic differential phase between beams{ for optimal operation of the tricoupler nulling stage}. Both devices can be integrated to deliver a deep, broadband null together with a real-time fringe phase metrology signal.
△ Less
Submitted 3 October, 2022;
originally announced October 2022.
-
Efficient detection and characterization of exoplanets within the diffraction limit: nulling with a mode-selective photonic lantern
Authors:
Yinzi Xin,
Nemanja Jovanovic,
Garreth Ruane,
Dimitri Mawet,
Michael P. Fitzgerald,
Daniel Echeverri,
Jonathan Lin,
Sergio Leon-Saval,
Pradip Gatkine,
Yoo Jung Kim,
Barnaby Norris,
Steph Sallum
Abstract:
Coronagraphs allow for faint off-axis exoplanets to be observed, but are limited to angular separations greater than a few beam widths. Accessing closer-in separations would greatly increase the expected number of detectable planets, which scales inversely with the inner working angle. The Vortex Fiber Nuller (VFN) is an instrument concept designed to characterize exoplanets within a single beam-w…
▽ More
Coronagraphs allow for faint off-axis exoplanets to be observed, but are limited to angular separations greater than a few beam widths. Accessing closer-in separations would greatly increase the expected number of detectable planets, which scales inversely with the inner working angle. The Vortex Fiber Nuller (VFN) is an instrument concept designed to characterize exoplanets within a single beam-width. It requires few optical elements and is compatible with many coronagraph designs as a complementary characterization tool. However, the peak throughput for planet light is limited to about 20%, and the measurement places poor constraints on the planet location and flux ratio. We propose to augment the VFN design by replacing its single-mode fiber with a six-port mode-selective photonic lantern, retaining the original functionality while providing several additional ports that reject starlight but couple planet light. We show that the photonic lantern can also be used as a nuller without a vortex. We present monochromatic simulations characterizing the response of the Photonic Lantern Nuller (PLN) to astrophysical signals and wavefront errors, and show that combining exoplanet flux from the nulled ports significantly increases the overall throughput of the instrument. We show using synthetically generated data that the PLN detects exoplanets more effectively than the VFN. Furthermore, with the PLN, the exoplanet can be partially localized, and its flux ratio constrained. The PLN has the potential to be a powerful characterization tool complementary to traditional coronagraphs in future high-contrast instruments.
△ Less
Submitted 15 September, 2022;
originally announced September 2022.
-
Focal-plane wavefront sensing with photonic lanterns I: theoretical framework
Authors:
Jonathan Lin,
Michael Fitzgerald,
Yinzi Xin,
Olivier Guyon,
Sergio Leon-Saval,
Barnaby Norris,
Nemanja Jovanovic
Abstract:
The photonic lantern (PL) is a tapered waveguide that can efficiently couple light into multiple single-mode optical fibers. Such devices are currently being considered for a number of tasks, including the coupling of telescopes and high-resolution, fiber-fed spectrometers, coherent detection, nulling interferometry, and vortex-fiber nulling (VFN). In conjunction with these use cases, PLs can simu…
▽ More
The photonic lantern (PL) is a tapered waveguide that can efficiently couple light into multiple single-mode optical fibers. Such devices are currently being considered for a number of tasks, including the coupling of telescopes and high-resolution, fiber-fed spectrometers, coherent detection, nulling interferometry, and vortex-fiber nulling (VFN). In conjunction with these use cases, PLs can simultaneously perform low-order focal-plane wavefront sensing. In this work, we provide a mathematical framework for the analysis of the photonic lantern wavefront sensor (PLWFS), deriving linear and higher-order reconstruction models as well as metrics through which sensing performance -- both in the linear and nonlinear regimes -- can be quantified. This framework can be extended to account for additional optics such as beam-sha** optics and vortex masks, and is generalizable to other wavefront sensing architectures. Lastly, we provide initial numerical verification of our mathematical models, by simulating a 6-port PLWFS. In a companion paper, we provide a more comprehensive numerical characterization of few-port PLWFSs, and consider how the sensing properties of these devices can be controlled and optimized.
△ Less
Submitted 22 August, 2022;
originally announced August 2022.
-
Learning the Lantern: Neural network applications to broadband photonic lantern modelling
Authors:
David Sweeney,
Barnaby R. M. Norris,
Peter Tuthill,
Richard Scalzo,
** Wei,
Christopher H. Betters,
Sergio G. Leon-Saval
Abstract:
Photonic lanterns allow the decomposition of highly multimodal light into a simplified modal basis such as single-moded and/or few-moded. They are increasingly finding uses in astronomy, optics and telecommunications. Calculating propagation through a photonic lantern using traditional algorithms takes $\sim 1$ hour per simulation on a modern CPU. This paper demonstrates that neural networks can b…
▽ More
Photonic lanterns allow the decomposition of highly multimodal light into a simplified modal basis such as single-moded and/or few-moded. They are increasingly finding uses in astronomy, optics and telecommunications. Calculating propagation through a photonic lantern using traditional algorithms takes $\sim 1$ hour per simulation on a modern CPU. This paper demonstrates that neural networks can bridge the disparate opto-electronic systems, and when trained can achieve a speed-up of over 5 orders of magnitude. We show that this approach can be used to model photonic lanterns with manufacturing defects as well as successfully generalising to polychromatic data. We demonstrate two uses of these neural network models, propagating seeing through the photonic lantern as well as performing global optimisation for purposes such as photonic lantern funnels and photonic lantern nullers.
△ Less
Submitted 30 August, 2021;
originally announced August 2021.
-
Seeking celestial Positronium with an OH-suppressed diffraction-limited spectrograph
Authors:
J. Gordon Robertson,
Simon Ellis,
Qingshan Yu,
Joss Bland-Hawthorn,
Christopher Betters,
Martin Roth,
Sergio Leon-Saval
Abstract:
Celestially, Positronium (Ps), has only been observed through gamma-ray emission produced by its annihilation. However, in its triplet state, a Ps atom has a mean lifetime long enough for electronic transitions to occur between quantum states. This produces a recombination spectrum observable in principle at near IR wavelengths, where angular resolution greatly exceeding that of the gamma-ray obse…
▽ More
Celestially, Positronium (Ps), has only been observed through gamma-ray emission produced by its annihilation. However, in its triplet state, a Ps atom has a mean lifetime long enough for electronic transitions to occur between quantum states. This produces a recombination spectrum observable in principle at near IR wavelengths, where angular resolution greatly exceeding that of the gamma-ray observations is possible. However, the background in the NIR is dominated by extremely bright atmospheric hydroxyl (OH) emission lines. In this paper we present the design of a diffraction-limited spectroscopic system using novel photonic components - a photonic lantern, OH Fiber Bragg Grating filters, and a photonic TIGER 2-dimensional pseudo-slit - to observe the Ps Balmer alpha line at 1.3122 microns for the first time.
△ Less
Submitted 18 June, 2021;
originally announced June 2021.
-
All-fiber photonic lantern multimode optical receiver with coherent adaptive optics beam combining
Authors:
Bo Zhang,
Jianfeng Sun,
Chenzhe Lao,
Christopher H Betters,
Alexander Argyros,
Yu Zhou,
Sergio G. Leon-Saval
Abstract:
A multimode optical receiver for free space optical communications (FSOC) based on a photonic lantern and adaptive optics coherent beam combining (CBC) of the lantern's single-mode outputs is proposed and demonstrated for the first time. The use of optical coherent combining in fiber serves to increase the signal to noise ratio compared to similar receivers based on electrically combined signals,…
▽ More
A multimode optical receiver for free space optical communications (FSOC) based on a photonic lantern and adaptive optics coherent beam combining (CBC) of the lantern's single-mode outputs is proposed and demonstrated for the first time. The use of optical coherent combining in fiber serves to increase the signal to noise ratio compared to similar receivers based on electrically combined signals, and represents an all-fiber approach to low-order adaptive optics. This optical receiver is demonstrated using a photonic lantern with three outputs, fibre couplers and active phase locking, and further investigated under atmospheric conditions with and without turbulence.
△ Less
Submitted 20 May, 2021;
originally announced May 2021.
-
3D-M3: High-spatial resolution spectroscopy with extreme AO and 3D printed micro-lenslets
Authors:
Theodoros Anagnos,
Mareike Trappen,
Blaise C. Kuo Tiong,
Tobias Feger,
Stephanos Yerolatsitis,
Robert J. Harris,
Julien Lozi,
Nemanja Jovanovic,
Tim A. Birks,
Sébastien Vievard,
Olivier Guyon,
Itandehui Gris-Sánchez,
Sergio G. Leon-Saval,
Barnaby Norris,
Sebastiaan Y. Haffert,
Phillip Hottinger,
Matthias Blaicher,
Yilin Xu,
Christopher H. Betters,
Christian Koos,
David W. Coutts,
Christian Schwab,
Andreas Quirrenbach
Abstract:
By combining IFS with ExAO we are now able to resolve objects close to the diffraction-limit of large telescopes, exploring new science cases. We introduce an IFU designed to couple light with a minimal platescale from the SCExAO facility at NIR wavelengths to a SM spectrograph. The IFU has a 3D-printed MLA on top of a custom SM MCF, to optimize the coupling of light into the fiber cores. We demon…
▽ More
By combining IFS with ExAO we are now able to resolve objects close to the diffraction-limit of large telescopes, exploring new science cases. We introduce an IFU designed to couple light with a minimal platescale from the SCExAO facility at NIR wavelengths to a SM spectrograph. The IFU has a 3D-printed MLA on top of a custom SM MCF, to optimize the coupling of light into the fiber cores. We demonstrate the potential of the instrument via initial results from the first on-sky runs at the 8.2 m Subaru Telescope with a spectrograph using off-the-shelf optics, allowing for rapid development with low cost.
△ Less
Submitted 14 June, 2021; v1 submitted 12 May, 2021;
originally announced May 2021.
-
An innovative integral field unit upgrade with 3D-printed micro-lenses for the RHEA at Subaru
Authors:
Theodoros Anagnos,
Pascal Maier,
Philipp Hottinger,
Chris Betters,
Tobias Feger,
Sergio G. Leon-Saval,
Itandehui Gris-Sánchez,
Stephanos Yerolatsitis,
Julien Lozi,
Tim A. Birks,
Sebastian Vievard,
Nemanja Jovanovic,
Adam D. Rains,
Michael J. Ireland,
Robert J. Harris,
Blaise C. Kuo Tiong,
Olivier Guyon,
Barnaby Norris,
Sebastiaan Y. Haffert,
Matthias Blaicher,
Yilin Xu,
Moritz Straub,
Jörg-Uwe Pott,
Oliver Sawodny,
Philip L. Neureuther
, et al. (4 additional authors not shown)
Abstract:
In the new era of Extremely Large Telescopes (ELTs) currently under construction, challenging requirements drive spectrograph designs towards techniques that efficiently use a facility's light collection power. Operating in the single-mode (SM) regime, close to the diffraction limit, reduces the footprint of the instrument compared to a conventional high-resolving power spectrograph. The custom bu…
▽ More
In the new era of Extremely Large Telescopes (ELTs) currently under construction, challenging requirements drive spectrograph designs towards techniques that efficiently use a facility's light collection power. Operating in the single-mode (SM) regime, close to the diffraction limit, reduces the footprint of the instrument compared to a conventional high-resolving power spectrograph. The custom built injection fiber system with 3D-printed micro-lenses on top of it for the replicable high-resolution exoplanet and asteroseismology spectrograph at Subaru in combination with extreme adaptive optics of SCExAO, proved its high efficiency in a lab environment, manifesting up to ~77% of the theoretical predicted performance.
△ Less
Submitted 24 January, 2021;
originally announced January 2021.
-
An all-photonic focal-plane wavefront sensor
Authors:
Barnaby R. M. Norris,
** Wei,
Christopher H. Betters,
Alison Wong,
Sergio G. Leon-Saval
Abstract:
Adaptive optics (AO) is critical in astronomy, optical communications and remote sensing to deal with the rapid blurring caused by the Earth's turbulent atmosphere. But current AO systems are limited by their wavefront sensors, which need to be in an optical plane non-common to the science image and are insensitive to certain wavefront-error modes. Here we present a wavefront sensor based on a pho…
▽ More
Adaptive optics (AO) is critical in astronomy, optical communications and remote sensing to deal with the rapid blurring caused by the Earth's turbulent atmosphere. But current AO systems are limited by their wavefront sensors, which need to be in an optical plane non-common to the science image and are insensitive to certain wavefront-error modes. Here we present a wavefront sensor based on a photonic lantern fibre-mode-converter and deep learning, which can be placed at the same focal plane as the science image, and is optimal for single-mode fibre injection. By measuring the intensities of an array of single-mode outputs, both phase and amplitude information on the incident wavefront can be reconstructed. We demonstrate the concept with simulations and an experimental realisation wherein Zernike wavefront errors are recovered from focal-plane measurements to a precision of $5.1\times10^{-3}\;π$ radians root-mean-squared-error.
△ Less
Submitted 22 October, 2020; v1 submitted 11 March, 2020;
originally announced March 2020.
-
A Multi-Core Fibre Photonic Lantern Based Spectrograph for Raman Spectroscopy
Authors:
Christopher H. Betters,
Joss Bland-Hawthorn,
Salah Sukkarieh,
Itandehui Gris-Sanchez,
Sergio G. Leon-Saval
Abstract:
We report on the development of a compact (volume $\approx$ 100\:cm$^3$), multimode diffraction-limited Raman spectrograph and probe designed to be compact as possible. The spectrograph uses `off the shelf' optics, a custom 3D-printed two-part housing and harnesses a multi-core fibre (MCF) photonic lantern (multimode to few-mode converter), which slices a large 40~\textmu m multimode input into a…
▽ More
We report on the development of a compact (volume $\approx$ 100\:cm$^3$), multimode diffraction-limited Raman spectrograph and probe designed to be compact as possible. The spectrograph uses `off the shelf' optics, a custom 3D-printed two-part housing and harnesses a multi-core fibre (MCF) photonic lantern (multimode to few-mode converter), which slices a large 40~\textmu m multimode input into a near-diffraction-limited 6~\textmu m aperture. Our unique design utilises the hexagonal geometry of our MCF, permitting high multimode collection efficiency with near-diffraction-limited performance in a compact design. Our approach does not require a complex reformatter or mask and thus preserves spectral information and throughput when forming the entrance slit of the spectrograph. We demonstrate the technology over the interval 800~nm to 940~nm (200~cm$^{-1}$ to 2000~cm$^{-1}$) with a resolution of 0.3\:nm (4\:cm$^{-1}$), but other spectral regions and resolutions from the UV to the near infrared are also possible. We demonstrate the performance of our system by recording the Raman spectra of several compounds, including the pharmaceuticals paracetamol and ibuprofen.
△ Less
Submitted 2 March, 2020;
originally announced March 2020.
-
First demonstration of OH suppression in a high efficiency near-infrared spectrograph
Authors:
S. C. Ellis,
J. Bland-Hawthorn,
J. S. Lawrence,
A. J. Horton,
R. Content,
M. M. Roth,
N. Pai,
R. Zhelem,
S. Case,
E. Hernandez,
S. G. Leon-Saval,
R. Haynes,
S. S. Min,
D. Giannone,
K. Madhav,
A. Rahman,
C. Betters,
D. Haynes,
W. Couch,
L. J. Kewley,
R. McDermid,
L. Spitler,
R. G. Sharp,
S. Veilleux
Abstract:
Ground-based near-infrared astronomy is severely hampered by the forest of atmospheric emission lines resulting from the rovibrational decay of OH molecules in the upper atmosphere. The extreme brightness of these lines, as well as their spatial and temporal variability, makes accurate sky subtraction difficult. Selectively filtering these lines with OH suppression instruments has been a long stan…
▽ More
Ground-based near-infrared astronomy is severely hampered by the forest of atmospheric emission lines resulting from the rovibrational decay of OH molecules in the upper atmosphere. The extreme brightness of these lines, as well as their spatial and temporal variability, makes accurate sky subtraction difficult. Selectively filtering these lines with OH suppression instruments has been a long standing goal for near-infrared spectroscopy. We have shown previously the efficacy of fibre Bragg gratings combined with photonic lanterns for achieving OH suppression. Here we report on PRAXIS, a unique near-infrared spectrograph that is optimised for OH suppression with fibre Bragg gratings. We show for the first time that OH suppression (of any kind) is possible with high overall throughput (18 per cent end-to-end), and provide examples of the relative benefits of OH suppression.
△ Less
Submitted 12 January, 2020;
originally announced January 2020.
-
Astro2020: Astrophotonics White Paper
Authors:
Pradip Gatkine,
Sylvain Veilleux,
John Mather,
Christopher Betters,
Jonathan Bland-Hawthorn,
Julia Bryant,
S. Bradley Cenko,
Mario Dagenais,
Drake Deming,
Simon Ellis,
Matthew Greenhouse,
Andrew Harris,
Nemanja Jovanovic,
Steve Kuhlmann,
Alexander Kutyrev,
Sergio Leon-Saval,
Kalaga Madhav,
Samuel Moseley,
Barnaby Norris,
Bernard Rauscher,
Martin Roth,
Stuart Vogel
Abstract:
Astrophotonics is the application of versatile photonic technologies to channel, manipulate, and disperse guided light from one or more telescopes to achieve scientific objectives in astronomy in an efficient and cost-effective way. The developments and demands from the telecommunication industry have driven a major boost in photonic technology and vice versa in the last 40 years. The photonic pla…
▽ More
Astrophotonics is the application of versatile photonic technologies to channel, manipulate, and disperse guided light from one or more telescopes to achieve scientific objectives in astronomy in an efficient and cost-effective way. The developments and demands from the telecommunication industry have driven a major boost in photonic technology and vice versa in the last 40 years. The photonic platform of guided light in fibers and waveguides has opened the doors to next-generation instrumentation for both ground- and space-based telescopes in optical and near/mid-IR bands, particularly for the upcoming extremely large telescopes (ELTs). The large telescopes are pushing the limits of adaptive optics to reach close to a near-diffraction-limited performance. The photonic devices are ideally suited for capturing this AO-corrected light and enabling new and exciting science such as characterizing exoplanet atmospheres. The purpose of this white paper is to summarize the current landscape of astrophotonic devices and their scientific impact, highlight the key issues, and outline specific technological and organizational approaches to address these issues in the coming decade and thereby enable new discoveries as we embark on the era of extremely large telescopes.
△ Less
Submitted 12 July, 2019;
originally announced July 2019.
-
Holistic spectroscopy: Complete reconstruction of a wide-field, multi-object spectroscopic image using a photonic comb
Authors:
Janez Kos,
Joss Bland-Hawthorn,
Christopher H. Betters,
Sergio Leon-Saval,
Martin Asplund,
Sven Buder,
Andrew R. Casey,
Valentina D'Orazi,
Gayandhi de Silva,
Ken Freeman,
Geraint Lewis,
Jane Lin,
Sarah L. Martell,
Katharine Schlesinger,
Sanjib Sharma,
Jeffrey D. Simpson,
Daniel Zucker,
Tomaž Zwitter,
Michael Hayden,
David M. Nataf,
Yuan-Sen Ting
Abstract:
The primary goal of Galactic archaeology is to learn about the origin of the Milky Way from the detailed chemistry and kinematics of millions of stars. Wide-field multi-fibre spectrographs are increasingly used to obtain spectral information for huge samples of stars. Some surveys (e.g. GALAH) are attempting to measure up to 30 separate elements per star. Stellar abundance spectroscopy is a subtle…
▽ More
The primary goal of Galactic archaeology is to learn about the origin of the Milky Way from the detailed chemistry and kinematics of millions of stars. Wide-field multi-fibre spectrographs are increasingly used to obtain spectral information for huge samples of stars. Some surveys (e.g. GALAH) are attempting to measure up to 30 separate elements per star. Stellar abundance spectroscopy is a subtle art that requires a very high degree of spectral uniformity across each of the fibres. However wide-field spectrographs are notoriously non-uniform due to the fast output optics necessary to image many fibre outputs onto the detector. We show that precise spectroscopy is possible with such instruments across all fibres by employing a photonic comb -- a device that produces uniformly spaced spots of light on the CCD to precisely map complex aberrations. Aberrations are parametrized by a set of orthogonal moments with $\sim100$ independent parameters. We then reproduce the observed image by convolving high resolution spectral templates with measured aberrations as opposed to extracting the spectra from the observed image. Such a forward modeling approach also trivializes some spectroscopic reduction problems like fibre cross-talk, and reliably extracts spectra with a resolution $\sim2.3$ times above the nominal resolution of the instrument. Our rigorous treatment of optical aberrations also encourages a less conservative spectrograph design in the future.
△ Less
Submitted 16 April, 2018;
originally announced April 2018.
-
Develo** post-coronagraphic, high-resolution spectroscopy for terrestrial planet characterization on ELTs
Authors:
N. Jovanovic,
O. Guyon,
T. Kotani,
H. Kawahara,
K. Hosokawa,
J. Lozi,
J. Males,
M. Ireland,
M. Tamura,
D. Mawet,
C. Schwab,
B. Norris,
S. Leon-Saval,
C. Betters,
P. Tuthill
Abstract:
Spectroscopic observations are extremely important for determining the composition, structure, and surface gravity of exoplanetary atmospheres. High resolution spectroscopy of the planet itself has only been demonstrated a handful of times. By using advanced high contrast imagers, it is possible to conduct high resolution spectroscopy on imageable exoplanets, after the star light is first suppress…
▽ More
Spectroscopic observations are extremely important for determining the composition, structure, and surface gravity of exoplanetary atmospheres. High resolution spectroscopy of the planet itself has only been demonstrated a handful of times. By using advanced high contrast imagers, it is possible to conduct high resolution spectroscopy on imageable exoplanets, after the star light is first suppressed with an advanced coronagraph. Because the planet is spatially separated in the focal plane, a single mode fiber could be used to collect the light from the planet alone, reducing the photon noise by orders of magnitude. In addition, speckle control applied to the location where an exoplanet is known to exist, can be used to preferentially reject the stellar flux from the fiber further.
In this paper we will present the plans for conducting high resolution spectroscopic studies of this nature with the combination of SCExAO and IRD in the H-band on the Subaru Telescope. This technique will be critical to the characterization of terrestrial planets on ELTs and future space missions.
△ Less
Submitted 22 December, 2017; v1 submitted 20 December, 2017;
originally announced December 2017.
-
The SAMI Galaxy Survey: Data Release One with Emission-line Physics Value-Added Products
Authors:
Andrew W. Green,
Scott M. Croom,
Nicholas Scott,
Luca Cortese,
Anne M. Medling,
Francesco D'Eugenio,
Julia J. Bryant,
Joss Bland-Hawthorn,
J. T. Allen,
Rob Sharp,
I-Ting Ho,
Brent Groves,
Michael J. Drinkwater,
Elizabeth Mannering,
Lloyd Harischandra,
Jesse van de Sande,
Adam D. Thomas,
Simon O'Toole,
Richard M. McDermid,
Minh Vuong,
Katrina Sealey,
Amanda E. Bauer,
S. Brough,
Barbara Catinella,
Gerald Cecil
, et al. (26 additional authors not shown)
Abstract:
We present the first major release of data from the SAMI Galaxy Survey. This data release focuses on the emission-line physics of galaxies. Data Release One includes data for 772 galaxies, about 20% of the full survey. Galaxies included have the redshift range 0.004 < z < 0.092, a large mass range (7.6 < log(Mstellar/M$_\odot$) < 11.6), and star-formation rates of 10^-4 to 10^1\ M$_\odot$/yr. For…
▽ More
We present the first major release of data from the SAMI Galaxy Survey. This data release focuses on the emission-line physics of galaxies. Data Release One includes data for 772 galaxies, about 20% of the full survey. Galaxies included have the redshift range 0.004 < z < 0.092, a large mass range (7.6 < log(Mstellar/M$_\odot$) < 11.6), and star-formation rates of 10^-4 to 10^1\ M$_\odot$/yr. For each galaxy, we include two spectral cubes and a set of spatially resolved 2D maps: single- and multi-component emission-line fits (with dust extinction corrections for strong lines), local dust extinction and star-formation rate. Calibration of the fibre throughputs, fluxes and differential-atmospheric-refraction has been improved over the Early Data Release. The data have average spatial resolution of 2.16 arcsec (FWHM) over the 15~arcsec diameter field of view and spectral (kinematic) resolution R=4263 (sigma=30km/s) around Halpha. The relative flux calibration is better than 5\% and absolute flux calibration better than $\pm0.22$~mag, with the latter estimate limited by galaxy photometry. The data are presented online through the Australian Astronomical Observatory's Data Central.
△ Less
Submitted 26 July, 2017;
originally announced July 2017.
-
Efficient injection from large telescopes into single-mode fibres: Enabling the era of ultra-precision astronomy
Authors:
N. Jovanovic,
C. Schwab,
O. Guyon,
J. Lozi,
N. Cvetojevic,
F. Martinache,
S. Leon-Saval,
B. Norris,
S. Gross,
D. Doughty,
T. Currie,
N. Takato
Abstract:
Photonic technologies offer numerous advantages for astronomical instruments such as spectrographs and interferometers owing to their small footprints and diverse range of functionalities. Operating at the diffraction-limit, it is notoriously difficult to efficiently couple such devices directly with large telescopes. We demonstrate that with careful control of both the non-ideal pupil geometry of…
▽ More
Photonic technologies offer numerous advantages for astronomical instruments such as spectrographs and interferometers owing to their small footprints and diverse range of functionalities. Operating at the diffraction-limit, it is notoriously difficult to efficiently couple such devices directly with large telescopes. We demonstrate that with careful control of both the non-ideal pupil geometry of a telescope and residual wavefront errors, efficient coupling with single-mode devices can indeed be realised. A fibre injection was built within the Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument. Light was coupled into a single-mode fibre operating in the near-IR (J-H bands) which was downstream of the extreme adaptive optics system and the pupil apodising optics. A coupling efficiency of 86% of the theoretical maximum limit was achieved at 1550 nm for a diffraction-limited beam in the laboratory, and was linearly correlated with Strehl ratio. The coupling efficiency was constant to within <30% in the range 1250-1600 nm. Preliminary on-sky data with a Strehl ratio of 60% in the H-band produced a coupling efficiency into a single-mode fibre of ~50%, consistent with expectations. The coupling was >40% for 84% of the time and >50% for 41% of the time. The laboratory results allow us to forecast that extreme adaptive optics levels of correction (Strehl ratio >90% in H-band) would allow coupling of >67% (of the order of coupling to multimode fibres currently). For Strehl ratios <20%, few-port photonic lanterns become a superior choice but the signal-to-noise must be considered. These results illustrate a clear path to efficient on-sky coupling into a single-mode fibre, which could be used to realise modal-noise-free radial velocity machines, very-long-baseline optical/near-IR interferometers and/or simply exploit photonic technologies in future instrument design.
△ Less
Submitted 26 August, 2017; v1 submitted 27 June, 2017;
originally announced June 2017.
-
Astrophotonics: molding the flow of light in astronomical instruments
Authors:
Joss Bland-Hawthorn,
Sergio Leon-Saval
Abstract:
Since its emergence two decades ago, astrophotonics has found broad application in scientific instruments at many institutions worldwide. The case for astrophotonics becomes more compelling as telescopes push for AO-assisted, diffraction-limited performance, a mode of observing that is central to the next-generation of extremely large telescopes (ELTs). Even AO systems are beginning to incorporate…
▽ More
Since its emergence two decades ago, astrophotonics has found broad application in scientific instruments at many institutions worldwide. The case for astrophotonics becomes more compelling as telescopes push for AO-assisted, diffraction-limited performance, a mode of observing that is central to the next-generation of extremely large telescopes (ELTs). Even AO systems are beginning to incorporate advanced photonic principles as the community pushes for higher performance and more complex guide-star configurations. Photonic instruments like Gravity on the Very Large Telescope achieve milliarcsec resolution at 2000 nm which would be very difficult to achieve with conventional optics. While space photonics is not reviewed here, we foresee that remote sensing platforms will become a major beneficiary of astrophotonic components in the years ahead. The field has given back with the development of new technologies (e.g. photonic lantern, large area multi-core fibres) already finding widespread use in other fields; Google Scholar lists more than 400 research papers making reference to this technology. This short review covers representative key developments since the 2009 Focus issue on Astrophotonics.
△ Less
Submitted 15 June, 2017;
originally announced June 2017.
-
Map** the aberrations of a wide-field spectrograph using a photonic comb
Authors:
Joss Bland-Hawthorn,
Janez Kos,
Christopher Betters,
Gayandhi De Silva,
John O'Byrne,
Rob Patterson,
Sergio Leon-Saval
Abstract:
We demonstrate a new approach to calibrating the spectral-spatial response of a wide-field spectrograph using a fibre etalon comb. Conventional wide-field instruments employed on front-line telescopes are mapped with a grid of diffraction-limited holes cut into a focal plane mask. The aberrated grid pattern in the image plane typically reveals n-symmetric (e.g. pincushion) distortion patterns over…
▽ More
We demonstrate a new approach to calibrating the spectral-spatial response of a wide-field spectrograph using a fibre etalon comb. Conventional wide-field instruments employed on front-line telescopes are mapped with a grid of diffraction-limited holes cut into a focal plane mask. The aberrated grid pattern in the image plane typically reveals n-symmetric (e.g. pincushion) distortion patterns over the field arising from the optical train. This approach is impractical in the presence of a dispersing element because the diffraction-limited spots in the focal plane are imaged as an array of overlap** spectra. Instead we propose a compact solution that builds on recent developments in fibre-based Fabry-Perot etalons. We introduce a novel approach to near-field illumination that exploits a 25cm commercial telescope and the propagation of skew rays in a multimode fibre. The map** of the optical transfer function across the full field is represented accurately (<0.5% rms residual) by an orthonormal set of Chebyshev moments. Thus we are able to reconstruct the full 4Kx4K CCD image of the dispersed output from the optical fibres using this map**, as we demonstrate. Our method removes one of the largest sources of systematic error in multi-object spectroscopy.
△ Less
Submitted 27 April, 2017;
originally announced April 2017.
-
Performance of a novel PMMA polymer imaging bundle for field acquisition and wavefront sensing
Authors:
Samuel Nathan Richards,
Sergio Leon-Saval,
Michael Goodwin,
Jessica Zheng,
Jon Lawrence,
Julia Bryant,
Joss Bland-Hawthorn,
Barnaby Norris,
Nick Cvetojevic,
Alexander Argyros
Abstract:
Imaging bundles provide a convenient way to translate a spatially coherent image, yet conventional imaging bundles made from silica fibre optics typically remain expensive with large losses due to poor filling factors (~40%). We present the characterisation of a novel polymer imaging bundle made from poly(methyl methacrylate) (PMMA) that is considerably cheaper and a better alternative to silica i…
▽ More
Imaging bundles provide a convenient way to translate a spatially coherent image, yet conventional imaging bundles made from silica fibre optics typically remain expensive with large losses due to poor filling factors (~40%). We present the characterisation of a novel polymer imaging bundle made from poly(methyl methacrylate) (PMMA) that is considerably cheaper and a better alternative to silica imaging bundles over short distances (~1 m; from the middle to the edge of a telescope's focal plane). The large increase in filling factor (92% for the polymer imaging bundle) outweighs the large increase in optical attenuation from using PMMA (1 dB/m) instead of silica (10^{-3} dB/m). We present and discuss current and possible future multi-object applications of the polymer imaging bundle in the context of astronomical instrumentation including: field acquisition, guiding, wavefront sensing, narrow-band imaging, aperture masking, and speckle imaging. The use of PMMA limits its use in low light applications (e.g. imaging of galaxies), however it is possible to fabricate polymer imaging bundles from a range of polymers that are better suited to the desired science.
△ Less
Submitted 13 January, 2017;
originally announced January 2017.
-
Air-structured optical fibre drawn from a 3D-printed preform
Authors:
Kevin Cook,
John Canning,
Sergio Leon-Saval,
Zane Reid,
Md Arafat Hossain,
Jade-Edouard Comatti,
Yanhua Luo,
Gang-Ding Peng
Abstract:
A structured optical fibre is drawn from a 3D-printed structured preform. Preforms containing a single ring of holes around the core are fabricated using filament made from a modified butadiene polymer. More broadly, 3D printers capable of processing soft glasses, silica and other materials are likely to come on line in the not-so distant future. 3D printing of optical preforms signals a new miles…
▽ More
A structured optical fibre is drawn from a 3D-printed structured preform. Preforms containing a single ring of holes around the core are fabricated using filament made from a modified butadiene polymer. More broadly, 3D printers capable of processing soft glasses, silica and other materials are likely to come on line in the not-so distant future. 3D printing of optical preforms signals a new milestone in optical fibre manufacture.
△ Less
Submitted 31 August, 2016;
originally announced September 2016.
-
The GALAH survey: The data reduction pipeline
Authors:
Janez Kos,
Jane Lin,
Tomaž Zwitter,
Maruška Žerjal,
Sanjib Sharma,
Joss Bland-Hawthorn,
Martin Asplund,
Andrew R. Casey,
Gayandhi M. De Silva,
Ken C. Freeman,
Sarah L. Martell,
Jeffrey D. Simpson,
Katharine J. Schlesinger,
Daniel Zucker,
Borja Anguiano,
Carlos Bacigalupo,
Timothy R. Bedding,
Christopher Betters,
Gary Da Costa,
Ly Duong,
Elaina Hyde,
Michael Ireland,
Prajwal R. Kafle,
Sergio Leon-Saval,
Geraint F. Lewis
, et al. (7 additional authors not shown)
Abstract:
We present the data reduction procedures being used by the GALAH survey, carried out with the HERMES fibre-fed, multi-object spectrograph on the 3.9~m Anglo-Australian Telescope. GALAH is a unique survey, targeting 1 million stars brighter than magnitude V=14 at a resolution of 28,000 with a goal to measure the abundances of 29 elements. Such a large number of high resolution spectra necessitates…
▽ More
We present the data reduction procedures being used by the GALAH survey, carried out with the HERMES fibre-fed, multi-object spectrograph on the 3.9~m Anglo-Australian Telescope. GALAH is a unique survey, targeting 1 million stars brighter than magnitude V=14 at a resolution of 28,000 with a goal to measure the abundances of 29 elements. Such a large number of high resolution spectra necessitates the development of a reduction pipeline optimized for speed, accuracy, and consistency. We outline the design and structure of the Iraf-based reduction pipeline that we developed, specifically for GALAH, to produce fully calibrated spectra aimed for subsequent stellar atmospheric parameter estimation. The pipeline takes advantage of existing Iraf routines and other readily available software so as to be simple to maintain, testable and reliable. A radial velocity and stellar atmospheric parameter estimator code is also presented, which is used for further data analysis and yields a useful verification of the reduction quality. We have used this estimator to quantify the data quality of GALAH for fibre cross-talk level ($\lesssim0.5$%) and scattered light ($\sim5$ counts in a typical 20 minutes exposure), resolution across the field, sky spectrum properties, wavelength solution reliability (better than $1$ $\mathrm{km\ s^{-1}}$ accuracy) and radial velocity precision.
△ Less
Submitted 15 August, 2016;
originally announced August 2016.
-
Hector - a new massively multiplexed IFS instrument for the Anglo-Australian Telescope
Authors:
Julia J. Bryant,
Joss Bland-Hawthorn,
Jon Lawrence,
Scott Croom,
David Brown,
Sudharshan Venkatesan,
Peter R. Gillingham,
Ross Zhelem,
Robert Content,
Will Saunders,
Nicholas F. Staszak,
Jesse van de Sande,
Warrick Couch,
Sergio Leon-Saval,
Julia Tims,
Richard McDermid,
Adam Schaefer
Abstract:
Hector will be the new massively-multiplexed integral field spectroscopy (IFS) instrument for the Anglo-Australian Telescope (AAT) in Australia and the next main dark-time instrument for the observatory. Based on the success of the SAMI instrument, which is undertaking a 3400-galaxy survey, the integral field unit (IFU) imaging fibre bundle (hexabundle) technology under-pinning SAMI is being impro…
▽ More
Hector will be the new massively-multiplexed integral field spectroscopy (IFS) instrument for the Anglo-Australian Telescope (AAT) in Australia and the next main dark-time instrument for the observatory. Based on the success of the SAMI instrument, which is undertaking a 3400-galaxy survey, the integral field unit (IFU) imaging fibre bundle (hexabundle) technology under-pinning SAMI is being improved to a new innovative design for Hector. The distribution of hexabundle angular sizes is matched to the galaxy survey properties in order to image 90% of galaxies out to 2 effective radii. 50-100 of these IFU imaging bundles will be positioned by 'starbug' robots across a new 3-degree field corrector top end to be purpose-built for the AAT. Many thousand fibres will then be fed into new replicable spectrographs. Fundamentally new science will be achieved compared to existing instruments due to Hector's wider field of view (3 degrees), high positioning efficiency using starbugs, higher spectroscopic resolution (R~3000-5500 from 3727-7761A, with a possible redder extension later) and large IFUs (up to 30 arcsec diameter with 61-217 fibre cores). A 100,000 galaxy IFS survey with Hector will decrypt how the accretion and merger history and large-scale environment made every galaxy different in its morphology and star formation history. The high resolution, particularly in the blue, will make Hector the only instrument to be able to measure higher-order kinematics for galaxies down to much lower velocity dispersion than in current large IFS galaxy surveys, opening up a wealth of new nearby galaxy science.
△ Less
Submitted 12 August, 2016;
originally announced August 2016.
-
Multicore fibre technology - the road to multimode photonics
Authors:
Joss Bland-Hawthorn,
Seong-Sik Min,
Emma Lindley,
Sergio Leon-Saval,
Simon Ellis,
John Lawrence,
Martin Roth,
Hans-Gerd Lohmannsroben,
Sylvain Veilleux
Abstract:
For the past forty years, optical fibres have found widespread use in ground-based and space-based instruments. In most applications, these fibres are used in conjunction with conventional optics to transport light. But photonics offers a huge range of optical manipulations beyond light transport that were rarely exploited before 2001. The fundamental obstacle to the broader use of photonics is th…
▽ More
For the past forty years, optical fibres have found widespread use in ground-based and space-based instruments. In most applications, these fibres are used in conjunction with conventional optics to transport light. But photonics offers a huge range of optical manipulations beyond light transport that were rarely exploited before 2001. The fundamental obstacle to the broader use of photonics is the difficulty of achieving photonic action in a multimode fibre. The first step towards a general solution was the invention of the photonic lantern (Leon-Saval, Birks & Bland-Hawthorn 2005) and the delivery of high-efficiency devices (< 1 dB loss) five years on (Noordegraaf et al 2009). Multicore fibres (MCF), used in conjunction with lanterns, are now enabling an even bigger leap towards multimode photonics. Until recently, the single-moded cores in MCFs were not sufficiently uniform to achieve telecom (SMF-28) performance. Now that high-quality MCFs have been realized, we turn our attention to printing complex functions (e.g. Bragg gratings for OH suppression) into their N cores. Our first work in this direction used a Mach-Zehnder interferometer (near-field phase mask) but this approach was only adequate for N=7 MCFs as measured by the grating uniformity (Lindley et al 2014). We have now built a Sagnac interferometer that gives a three-fold increase in the depth of field sufficient to print across N > 127 cores. We achieved first light this year with our 500mW Sabre FRED laser. These are sophisticated and complex interferometers. We report on our progress to date and summarize our first-year goals which include multimode OH suppression fibres for the Anglo-Australian Telescope/PRAXIS instrument and the Discovery Channel Telescope/MOHSIS instrument under development at the University of Maryland.
△ Less
Submitted 3 June, 2016;
originally announced June 2016.
-
Photonic Lantern
Authors:
Sergio Leon-Saval,
Alexander Argyros,
Joss Bland-Hawthorn
Abstract:
Photonic lanterns allow for a low-loss transformation of a multimode waveguide into a discrete number of single-mode waveguides and vice versa, thus, enabling the use of single-mode photonic technologies in multimode systems. In this review, we will discuss the theory and function of the photonic lantern, along with several different variants of the technology. We will also discuss some of its app…
▽ More
Photonic lanterns allow for a low-loss transformation of a multimode waveguide into a discrete number of single-mode waveguides and vice versa, thus, enabling the use of single-mode photonic technologies in multimode systems. In this review, we will discuss the theory and function of the photonic lantern, along with several different variants of the technology. We will also discuss some of its applications in more detail.
△ Less
Submitted 11 March, 2015;
originally announced March 2015.
-
The Photonic Lantern
Authors:
T. A. Birks,
I. Gris-Sánchez,
S. Yerolatsitis,
S. G. Leon-Saval,
R. R. Thomson
Abstract:
Photonic lanterns are made by adiabatically merging several single-mode cores into one multimode core. They provide low-loss interfaces between single-mode and multimode systems where the precise optical map** between cores and individual modes is unimportant.
Photonic lanterns are made by adiabatically merging several single-mode cores into one multimode core. They provide low-loss interfaces between single-mode and multimode systems where the precise optical map** between cores and individual modes is unimportant.
△ Less
Submitted 11 March, 2015; v1 submitted 10 March, 2015;
originally announced March 2015.
-
The SAMI Galaxy Survey: instrument specification and target selection
Authors:
J. J. Bryant,
M. S. Owers,
A. S. G. Robotham,
S. M. Croom,
S. P. Driver,
M. J. Drinkwater,
N. P. F. Lorente,
L. Cortese,
N. Scott,
M. Colless,
A. Schaefer,
E. N. Taylor,
I. S. Konstantopoulos,
J. T. Allen,
I. Baldry,
L. Barnes,
A. E. Bauer,
J. Bland-Hawthorn,
J. V. Bloom,
A. M. Brooks,
S. Brough,
G. Cecil,
W. Couch,
D. Croton,
R. Davies
, et al. (32 additional authors not shown)
Abstract:
The SAMI Galaxy Survey will observe 3400 galaxies with the Sydney-AAO Multi-object Integral-field spectrograph (SAMI) on the Anglo-Australian Telescope (AAT) in a 3-year survey which began in 2013. We present the throughput of the SAMI system, the science basis and specifications for the target selection, the survey observation plan and the combined properties of the selected galaxies. The survey…
▽ More
The SAMI Galaxy Survey will observe 3400 galaxies with the Sydney-AAO Multi-object Integral-field spectrograph (SAMI) on the Anglo-Australian Telescope (AAT) in a 3-year survey which began in 2013. We present the throughput of the SAMI system, the science basis and specifications for the target selection, the survey observation plan and the combined properties of the selected galaxies. The survey includes four volume limited galaxy samples based on cuts in a proxy for stellar mass, along with low-stellar mass dwarf galaxies all selected from the Galaxy And Mass Assembly (GAMA) survey. The GAMA regions were selected because of the vast array of ancillary data available, including ultraviolet through to radio bands. These fields are on the celestial equator at 9, 12, and 14.5 hours, and cover a total of 144 square degrees (in GAMA-I). Higher density environments are also included with the addition of eight clusters. The clusters have spectroscopy from 2dFGRS and SDSS and photometry in regions covered by the Sloan Digital Sky Survey (SDSS) and/or VLT Survey Telescope/ATLAS. The aim is to cover a broad range in stellar mass and environment, and therefore the primary survey targets cover redshifts 0.004 < z < 0.095, magnitudes r$_{pet}$ < 19.4, stellar masses $10^{7} - 10^{12}$ M$_{sol}$, and environments from isolated field galaxies through groups to clusters of $10^{15}$ M$_{sol}$.
△ Less
Submitted 17 February, 2015; v1 submitted 28 July, 2014;
originally announced July 2014.
-
PRAXIS: low thermal emission high efficiency OH suppressed fibre spectrograph
Authors:
Robert Content,
Joss Bland-Hawthorn,
Simon Ellis,
Luke Gers,
Roger Haynes,
Anthony Horton,
Jon Lawrence,
Sergio Leon-Saval,
Emma Lindley,
Seong-Sik Min,
Keith Shortridge,
Nick Staszak,
Christopher Trinh,
Pascal Xavier,
Ross Zhelem
Abstract:
PRAXIS is a second generation instrument that follows on from GNOSIS, which was the first instrument using fibre Bragg gratings for OH background suppression. The Bragg gratings reflect the NIR OH lines while being transparent to light between the lines. This gives a much higher signal-noise ratio at low resolution but also at higher resolutions by removing the scattered wings of the OH lines. The…
▽ More
PRAXIS is a second generation instrument that follows on from GNOSIS, which was the first instrument using fibre Bragg gratings for OH background suppression. The Bragg gratings reflect the NIR OH lines while being transparent to light between the lines. This gives a much higher signal-noise ratio at low resolution but also at higher resolutions by removing the scattered wings of the OH lines. The specifications call for high throughput and very low thermal and detector noise so that PRAXIS will remain sky noise limited. The optical train is made of fore-optics, an IFU, a fibre bundle, the Bragg grating unit, a second fibre bundle and a spectrograph. GNOSIS used the pre-existing IRIS2 spectrograph while PRAXIS will use a new spectrograph specifically designed for the fibre Bragg grating OH suppression and optimised for 1470 nm to 1700 nm (it can also be used in the 1090 nm to 1260 nm band by changing the grating and refocussing). This results in a significantly higher transmission due to high efficiency coatings, a VPH grating at low incident angle and low absorption glasses. The detector noise will also be lower. Throughout the PRAXIS design special care was taken at every step along the optical path to reduce thermal emission or stop it leaking into the system. This made the spectrograph design challenging because practical constraints required that the detector and the spectrograph enclosures be physically separate by air at ambient temperature. At present, the instrument uses the GNOSIS fibre Bragg grating OH suppression unit. We intend to soon use a new OH suppression unit based on multicore fibre Bragg gratings which will allow increased field of view per fibre. Theoretical calculations show that the gain in interline sky background signal-noise ratio over GNOSIS may very well be as high as 9 with the GNOSIS OH suppression unit and 17 with the multicore fibre OH suppression unit.
△ Less
Submitted 29 July, 2014; v1 submitted 23 July, 2014;
originally announced July 2014.
-
The SAMI Galaxy Survey: Early Data Release
Authors:
J. T. Allen,
S. M. Croom,
I. S. Konstantopoulos,
J. J. Bryant,
R. Sharp,
G. N. Cecil,
L. M. R. Fogarty,
C. Foster,
A. W. Green,
I. -T. Ho,
M. S. Owers,
A. L. Schaefer,
N. Scott,
A. E. Bauer,
I. Baldry,
L. A. Barnes,
J. Bland-Hawthorn,
J. V. Bloom,
S. Brough,
M. Colless,
L. Cortese,
W. J. Couch,
M. J. Drinkwater,
S. P. Driver,
M. Goodwin
, et al. (23 additional authors not shown)
Abstract:
We present the Early Data Release of the Sydney-AAO Multi-object Integral field spectrograph (SAMI) Galaxy Survey. The SAMI Galaxy Survey is an ongoing integral field spectroscopic survey of ~3400 low-redshift (z<0.12) galaxies, covering galaxies in the field and in groups within the Galaxy And Mass Assembly (GAMA) survey regions, and a sample of galaxies in clusters.
In the Early Data Release,…
▽ More
We present the Early Data Release of the Sydney-AAO Multi-object Integral field spectrograph (SAMI) Galaxy Survey. The SAMI Galaxy Survey is an ongoing integral field spectroscopic survey of ~3400 low-redshift (z<0.12) galaxies, covering galaxies in the field and in groups within the Galaxy And Mass Assembly (GAMA) survey regions, and a sample of galaxies in clusters.
In the Early Data Release, we publicly release the fully calibrated datacubes for a representative selection of 107 galaxies drawn from the GAMA regions, along with information about these galaxies from the GAMA catalogues. All datacubes for the Early Data Release galaxies can be downloaded individually or as a set from the SAMI Galaxy Survey website.
In this paper we also assess the quality of the pipeline used to reduce the SAMI data, giving metrics that quantify its performance at all stages in processing the raw data into calibrated datacubes. The pipeline gives excellent results throughout, with typical sky subtraction residuals in the continuum of 0.9-1.2 per cent, a relative flux calibration uncertainty of 4.1 per cent (systematic) plus 4.3 per cent (statistical), and atmospheric dispersion removed with an accuracy of 0."09, less than a fifth of a spaxel.
△ Less
Submitted 30 September, 2014; v1 submitted 22 July, 2014;
originally announced July 2014.
-
Miniaturized Shack-Hartmann Wavefront-Sensors for Starbugs
Authors:
Michael Goodwin,
Belen Alcalde,
Samuel Richards,
Jessica Zheng,
Jon Lawrence,
Sergio Leon-Saval,
Alexander Argyros
Abstract:
The ability to position multiple miniaturized wavefront sensors precisely over large focal surfaces are advantageous to multi-object adaptive optics. The Australian Astronomical Observatory (AAO) has prototyped a compact and lightweight Shack-Hartmann wavefront-sensor that fits into a standard Starbug parallel fibre positioning robot. Each device makes use of a polymer coherent fibre imaging bundl…
▽ More
The ability to position multiple miniaturized wavefront sensors precisely over large focal surfaces are advantageous to multi-object adaptive optics. The Australian Astronomical Observatory (AAO) has prototyped a compact and lightweight Shack-Hartmann wavefront-sensor that fits into a standard Starbug parallel fibre positioning robot. Each device makes use of a polymer coherent fibre imaging bundle to relay an image produced by a microlens array placed at the telescope focal plane to a re-imaging camera mounted elsewhere. The advantages of the polymer fibre bundle are its high-fill factor, high-throughput, low weight, and relatively low cost. Multiple devices can also be multiplexed to a single low-noise camera for cost efficiencies per wavefront sensor. The use of fibre bundles also opens the possibility of applications such as telescope field acquisition, guiding, and seeing monitors to be positioned by Starbugs. We present the design aspects, simulations and laboratory test results.
△ Less
Submitted 17 July, 2014;
originally announced July 2014.
-
Beating the classical limit: A diffraction-limited spectrograph for an arbitrary input beam
Authors:
Christopher H. Betters,
Sergio G. Leon-Saval,
J. Gordon Robertson,
Joss Bland-Hawthorn
Abstract:
We demonstrate a new approach to classical fiber-fed spectroscopy. Our method is to use a photonic lantern that converts an arbitrary (e.g. incoherent) input beam into N diffraction-limited outputs. For the highest throughput, the number of outputs must be matched to the total number of unpolarized spatial modes on input. This approach has many advantages: (i) after the lantern, the instrument is…
▽ More
We demonstrate a new approach to classical fiber-fed spectroscopy. Our method is to use a photonic lantern that converts an arbitrary (e.g. incoherent) input beam into N diffraction-limited outputs. For the highest throughput, the number of outputs must be matched to the total number of unpolarized spatial modes on input. This approach has many advantages: (i) after the lantern, the instrument is constructed from 'commercial off the shelf' components; (ii) the instrument is the minimum size and mass configuration at a fixed resolving power and spectral order (~shoebox sized in this case); (iii) the throughput is better than 60% (slit to detector, including detector QE of ~80%); (iv) the scattered light at the detector can be less than 0.1% (total power). Our first implementation operates over 1545-1555 nm (limited by the detector, a 640$\times$512 array with 20$μ$m pitch) with a spectral resolution of 0.055nm (R~30,000) using a 1$\times$7 (1 multi-mode input to 7 single-mode outputs) photonic lantern. This approach is a first step towards a fully integrated, multimode photonic microspectrograph.
△ Less
Submitted 17 October, 2013;
originally announced October 2013.
-
The nature of the near-infrared interline sky background using fibre Bragg grating OH suppression
Authors:
Christopher Q. Trinh,
Simon C. Ellis,
Joss Bland-Hawthorn,
Anthony J. Horton,
Jon S. Lawrence,
Sergio G. Leon-Saval
Abstract:
We analyse the near-infrared interline sky background, OH and O2 emission in 19 hours of H band observations with the GNOSIS OH suppression unit and the IRIS2 spectrograph at the 3.9-m AAT. We find that the temporal behaviour of OH emission is best described by a gradual decrease during the first half of the night followed by a gradual increase during the second half of the night following the beh…
▽ More
We analyse the near-infrared interline sky background, OH and O2 emission in 19 hours of H band observations with the GNOSIS OH suppression unit and the IRIS2 spectrograph at the 3.9-m AAT. We find that the temporal behaviour of OH emission is best described by a gradual decrease during the first half of the night followed by a gradual increase during the second half of the night following the behaviour of the solar elevation angle. We measure the interline background at 1.520 microns where the instrumental thermal background is very low and study its variation with zenith distance, time after sunset, ecliptic latitude, lunar zenith angle and lunar distance to determine the presence of non-thermal atmospheric emission, zodiacal scattered light and scattered moonlight. Zodiacal scattered light is too faint to be detected in the summed observations. Scattered moonlight due to Mie scattering by atmospheric aerosols is seen at small lunar distances (< 11 deg), but is otherwise too faint to detect. Except at very small lunar distances the interline background at a resolving power of R~2400 when using OH suppression fibres is dominated by a non-thermal atmospheric source with a temporal behaviour that resembles atmospheric OH emission suggesting that the interline background contains instrumentally-scattered OH. However, the interline background dims more rapidly than OH early in the night suggesting contributions from rapid dimming molecules. The absolute interline background is 560 +/- 120 photons s^-1 m^-2 micron^-1 arcsec^-2 under dark conditions. This value is similar to previous measurements without OH suppression suggesting that non-suppressed atmospheric emission is responsible for the interline background. Future OH suppression fibre designs may address this by the suppression of more sky lines using more accurate sky line measurements taken from high resolution spectra.
△ Less
Submitted 11 April, 2013; v1 submitted 2 January, 2013;
originally announced January 2013.
-
Single mode, extreme precision Doppler spectrographs
Authors:
Christian Schwab,
Sergio G. Leon-Saval,
Christopher H. Betters,
Joss Bland-Hawthorn,
Suvrath Mahadevan
Abstract:
The 'holy grail' of exoplanet research today is the detection of an earth-like planet: a rocky planet in the habitable zone around a main-sequence star. Extremely precise Doppler spectroscopy is an indispensable tool to find and characterize earth-like planets; however, to find these planets around solar-type stars, we need nearly one order of magnitude better radial velocity (RV) precision than t…
▽ More
The 'holy grail' of exoplanet research today is the detection of an earth-like planet: a rocky planet in the habitable zone around a main-sequence star. Extremely precise Doppler spectroscopy is an indispensable tool to find and characterize earth-like planets; however, to find these planets around solar-type stars, we need nearly one order of magnitude better radial velocity (RV) precision than the best current spectrographs provide. Recent developments in astrophotonics (Bland-Hawthorn & Horton 2006, Bland-Hawthorn et al. 2010) and adaptive optics (AO) enable single mode fiber (SMF) fed, high resolution spectrographs, which can realize the next step in precision. SMF feeds have intrinsic advantages over multimode fiber or slit coupled spectrographs: The intensity distribution at the fiber exit is extremely stable, and as a result the line spread function of a well-designed spectrograph is fully decoupled from input coupling conditions, like guiding or seeing variations (Ihle et al. 2010). Modal noise, a limiting factor in current multimode fiber fed instruments (Baudrand & Walker 2001), can be eliminated by proper design, and the diffraction limited input to the spectrograph allows for very compact instrument designs, which provide excellent optomechanical stability. A SMF is the ideal interface for new, very precise wavelength calibrators, like laser frequency combs (Steinmetz et al. 2008, Osterman et al. 2012), or SMF based Fabry-Perot Etalons (Halverson et al. 2012). At near infrared wavelengths, these technologies are ready to be implemented in on-sky instruments, or already in use. We discuss a novel concept for such a spectrograph.
△ Less
Submitted 19 December, 2012;
originally announced December 2012.
-
GNOSIS: the first instrument to use fibre Bragg gratings for OH suppression
Authors:
Christopher Q. Trinh,
Simon C. Ellis,
Joss Bland-Hawthorn,
Jon S. Lawrence,
Anthony J. Horton,
Sergio G. Leon-Saval,
Keith Shortridge,
Julia Bryant,
Scott Case,
Matthew Colless,
Warick Couch,
Kenneth Freeman,
Hans-Gerd Loehmannsroeben,
Luke Gers,
Karl Glazebrook,
Roger Haynes,
Steve Lee,
John O'Byrne,
Stan Miziarski,
Martin M. Roth,
Brian Schmidt,
Christopher G. Tinney,
Jessica Zheng
Abstract:
GNOSIS is a prototype astrophotonic instrument that utilizes OH suppression fibres consisting of fibre Bragg gratings and photonic lanterns to suppress the 103 brightest atmospheric emission doublets between 1.47-1.7 microns. GNOSIS was commissioned at the 3.9-meter Anglo-Australian Telescope with the IRIS2 spectrograph to demonstrate the potential of OH suppression fibres, but may be potentially…
▽ More
GNOSIS is a prototype astrophotonic instrument that utilizes OH suppression fibres consisting of fibre Bragg gratings and photonic lanterns to suppress the 103 brightest atmospheric emission doublets between 1.47-1.7 microns. GNOSIS was commissioned at the 3.9-meter Anglo-Australian Telescope with the IRIS2 spectrograph to demonstrate the potential of OH suppression fibres, but may be potentially used with any telescope and spectrograph combination. Unlike previous atmospheric suppression techniques GNOSIS suppresses the lines before dispersion and in a manner that depends purely on wavelength. We present the instrument design and report the results of laboratory and on-sky tests from commissioning. While these tests demonstrated high throughput and excellent suppression of the skylines by the OH suppression fibres, surprisingly GNOSIS produced no significant reduction in the interline background and the sensitivity of GNOSIS and IRIS2 is about the same as IRIS2. It is unclear whether the lack of reduction in the interline background is due to physical sources or systematic errors as the observations are detector noise-dominated. OH suppression fibres could potentially impact ground-based astronomy at the level of adaptive optics or greater. However, until a clear reduction in the interline background and the corresponding increasing in sensitivity is demonstrated optimized OH suppression fibres paired with a fibre-fed spectrograph will at least provide a real benefits at low resolving powers.
△ Less
Submitted 11 April, 2013; v1 submitted 5 December, 2012;
originally announced December 2012.
-
First Science with SAMI: A Serendipitously Discovered Galactic Wind in ESO 185-G031
Authors:
Lisa M. R. Fogarty,
Joss Bland-Hawthorn,
Scott M. Croom,
Andrew W. Green,
Julia J. Bryant,
Jon S. Lawrence,
Samuel Richards,
James T. Allen,
Amanda E. Bauer,
Michael N. Birchall,
Sarah Brough,
Matthew Colless,
Simon C. Ellis,
Tony Farrell,
Michael Goodwin,
Ron Heald,
Andrew M. Hopkins,
Anthony Horton,
D. Heath Jones,
Steve Lee,
Geraint Lewis,
Ángel R. López-Sánchez,
Stan Miziarski,
Holly Trowland,
Sergio G. Leon-Saval
, et al. (5 additional authors not shown)
Abstract:
We present the first scientific results from the Sydney-AAO Multi-Object IFS (SAMI) at the Anglo-Australian Telescope. This unique instrument deploys 13 fused fibre bundles (hexabundles) across a one-degree field of view allowing simultaneous spatially-resolved spectroscopy of 13 galaxies. During the first SAMI commissioning run, targeting a single galaxy field, one object (ESO 185-G031) was found…
▽ More
We present the first scientific results from the Sydney-AAO Multi-Object IFS (SAMI) at the Anglo-Australian Telescope. This unique instrument deploys 13 fused fibre bundles (hexabundles) across a one-degree field of view allowing simultaneous spatially-resolved spectroscopy of 13 galaxies. During the first SAMI commissioning run, targeting a single galaxy field, one object (ESO 185-G031) was found to have extended minor axis emission with ionisation and kinematic properties consistent with a large-scale galactic wind. The importance of this result is two-fold: (i) fibre bundle spectrographs are able to identify low-surface brightness emission arising from extranuclear activity; (ii) such activity may be more common than presently assumed because conventional multi-object spectrographs use single-aperture fibres and spectra from these are nearly always dominated by nuclear emission. These early results demonstrate the extraordinary potential of multi-object hexabundle spectroscopy in future galaxy surveys.
△ Less
Submitted 1 November, 2012;
originally announced November 2012.
-
The Photonic TIGER: a multicore fiber-fed spectrograph
Authors:
Sergio G. Leon-Saval,
Christopher H. Betters,
Joss Bland-Hawthorn
Abstract:
We present a proof of concept compact diffraction limited high-resolution fiber-fed spectrograph by using a 2D multicore array input. This high resolution spectrograph is fed by a 2D pseudo-slit, the Photonic TIGER, a hexagonal array of near-diffraction limited single-mode cores. We study the feasibility of this new platform related to the core array separation and rotation with respect to the dis…
▽ More
We present a proof of concept compact diffraction limited high-resolution fiber-fed spectrograph by using a 2D multicore array input. This high resolution spectrograph is fed by a 2D pseudo-slit, the Photonic TIGER, a hexagonal array of near-diffraction limited single-mode cores. We study the feasibility of this new platform related to the core array separation and rotation with respect to the dispersion axis. A 7 core compact Photonic TIGER fiber-fed spectrograph with a resolving power of around R~31000 and 8 nm bandwidth in the IR centered on 1550 nm is demonstrated. We also describe possible architectures based on this concept for building small scale compact diffraction limited Integral Field Spectrographs (IFS).
△ Less
Submitted 14 August, 2012;
originally announced August 2012.
-
Suppression of the near-infrared OH night sky lines with fibre Bragg gratings - first results
Authors:
S. C. Ellis,
J. Bland-Hawthorn,
J. Lawrence,
A. J. Horton,
C. Trinh,
S. G. Leon-Saval,
K. Shortridge,
J. Bryant,
S. Case,
M. Colless,
W. Couch,
K. Freeman,
L. Gers,
K. Glazebrook,
R. Haynes,
S. Lee,
H. -G. Loehmannsroeben,
J. O. Byrne,
S. Miziarski,
M. Roth,
B. Schmidt,
C. G. Tinney,
J. Zheng
Abstract:
The background noise between 1 and 1.8 microns in ground-based instruments is dominated by atmospheric emission from hydroxyl molecules. We have built and commissioned a new instrument, GNOSIS, which suppresses 103 OH doublets between 1.47 - 1.7 microns by a factor of ~1000 with a resolving power of ~10,000. We present the first results from the commissioning of GNOSIS using the IRIS2 spectrograph…
▽ More
The background noise between 1 and 1.8 microns in ground-based instruments is dominated by atmospheric emission from hydroxyl molecules. We have built and commissioned a new instrument, GNOSIS, which suppresses 103 OH doublets between 1.47 - 1.7 microns by a factor of ~1000 with a resolving power of ~10,000. We present the first results from the commissioning of GNOSIS using the IRIS2 spectrograph at the AAT. The combined throughput of the GNOSIS fore-optics, grating unit and relay optics is ~36 per cent, but this could be improved to ~46 per cent with a more optimal design. We measure strong suppression of the OH lines, confirming that OH suppression with fibre Bragg gratings will be a powerful technology for low resolution spectroscopy. The integrated OH suppressed background between 1.5 and 1.7 microns is reduced by a factor of 9 compared to a control spectrum using the same system without suppression. The potential of low resolution OH suppressed spectroscopy is illustrated with example observations.
The GNOSIS background is dominated by detector dark current below 1.67 microns and by thermal emission above 1.67 microns. After subtracting these we detect an unidentified residual interline component of ~ 860 +/ 210 ph/s/m^2/micron/arcsec^2. This component is equally bright in the suppressed and control spectra. We have investigated the possible source of the interline component, but were unable to discriminate between a possible instrumental artifact and intrinsic atmospheric emission. Resolving the source of this emission is crucial for the design of fully optimised OH suppression spectrographs. The next generation OH suppression spectrograph will be focussed on resolving the source of the interline component, taking advantage of better optimisation for a FBG feed. We quantify the necessary improvements for an optimal OH suppressing fibre spectrograph design.
△ Less
Submitted 27 June, 2012;
originally announced June 2012.
-
The Sydney-AAO Multi-object Integral field spectrograph (SAMI)
Authors:
Scott M. Croom,
Jon S. Lawrence,
Joss Bland-Hawthorn,
Julia J. Bryant,
Lisa Fogarty,
Samuel Richards,
Michael Goodwin,
Tony Farrell,
Stan Miziarski,
Ron Heald,
D. Heath Jones,
Steve Lee,
Matthew Colless,
Sarah Brough,
Andrew M. Hopkins,
Amanda E. Bauer,
Michael N. Birchall,
Simon Ellis,
Anthony Horton,
Sergio Leon-Saval,
Geraint Lewis,
A. R. Lopez-Sanchez,
Seong-Sik Min,
Christopher Trinh,
Holly Trowland
Abstract:
We demonstrate a novel technology that combines the power of the multi-object spectrograph with the spatial multiplex advantage of an integral field spectrograph (IFS). The Sydney-AAO Multi-object IFS (SAMI) is a prototype wide-field system at the Anglo-Australian Telescope (AAT) that allows 13 imaging fibre bundles ("hexabundles") to be deployed over a 1-degree diameter field of view. Each hexabu…
▽ More
We demonstrate a novel technology that combines the power of the multi-object spectrograph with the spatial multiplex advantage of an integral field spectrograph (IFS). The Sydney-AAO Multi-object IFS (SAMI) is a prototype wide-field system at the Anglo-Australian Telescope (AAT) that allows 13 imaging fibre bundles ("hexabundles") to be deployed over a 1-degree diameter field of view. Each hexabundle comprises 61 lightly-fused multimode fibres with reduced cladding and yields a 75 percent filling factor. Each fibre core diameter subtends 1.6 arcseconds on the sky and each hexabundle has a field of view of 15 arcseconds diameter. The fibres are fed to the flexible AAOmega double-beam spectrograph, which can be used at a range of spectral resolutions (R=lambda/delta(lambda) ~ 1700-13000) over the optical spectrum (3700-9500A). We present the first spectroscopic results obtained with SAMI for a sample of galaxies at z~0.05. We discuss the prospects of implementing hexabundles at a much higher multiplex over wider fields of view in order to carry out spatially--resolved spectroscopic surveys of 10^4 to 10^5 galaxies.
△ Less
Submitted 14 December, 2011;
originally announced December 2011.
-
A complex multi-notch astronomical filter to suppress the bright infrared sky
Authors:
J. Bland-Hawthorn,
S. C. Ellis,
S. G. Leon-Saval,
R. Haynes,
M. M. Roth,
H. -G. Löhmannsröben,
A. J. Horton,
J. -G. Cuby,
T. A. Birks,
J. S. Lawrence,
P. Gillingham,
S. D. Ryder,
C. Trinh
Abstract:
A long-standing and profound problem in astronomy is the difficulty in obtaining deep near-infrared observations due to the extreme brightness and variability of the night sky at these wavelengths. A solution to this problem is crucial if we are to obtain the deepest possible observations of the early Universe since redshifted starlight from distant galaxies appears at these wavelengths. The atmos…
▽ More
A long-standing and profound problem in astronomy is the difficulty in obtaining deep near-infrared observations due to the extreme brightness and variability of the night sky at these wavelengths. A solution to this problem is crucial if we are to obtain the deepest possible observations of the early Universe since redshifted starlight from distant galaxies appears at these wavelengths. The atmospheric emission between 1000 nm and 1800 nm arises almost entirely from a forest of extremely bright, very narrow hydroxyl emission lines that varies on timescales of minutes. The astronomical community has long envisaged the prospect of selectively removing these lines, while retaining high throughput between the lines. Here we demonstrate such a filter for the first time, presenting results from the first on-sky tests. Its use on current 8m telescopes and future 30m telescopes will open up many new research avenues in the years to come.
△ Less
Submitted 7 December, 2011;
originally announced December 2011.
-
Characterization of hexabundles: Initial results
Authors:
J. J. Bryant,
J. W. O'Byrne,
J. Bland-Hawthorn,
S. G. Leon-Saval
Abstract:
New multi-core imaging fibre bundles -- hexabundles -- being developed at the University of Sydney will provide simultaneous integral field spectroscopy for hundreds of celestial sources across a wide angular field. These are a natural progression from the use of single fibres in existing galaxy surveys. Hexabundles will allow us to address fundamental questions in astronomy without the biases int…
▽ More
New multi-core imaging fibre bundles -- hexabundles -- being developed at the University of Sydney will provide simultaneous integral field spectroscopy for hundreds of celestial sources across a wide angular field. These are a natural progression from the use of single fibres in existing galaxy surveys. Hexabundles will allow us to address fundamental questions in astronomy without the biases introduced by a fixed entrance aperture. We have begun to consider instrument concepts that exploit hundreds of hexabundles over the widest possible field of view. To this end, we have compared the performance of a 61-core fully-fused hexabundle and 5 lightly-fused bundles with 7 cores each. All fibres in the bundles have 100 micron cores. In the fully-fused bundle, the cores are distorted from a circular shape in order to achieve a higher fill fraction. The lightly-fused bundles have circular cores and five different cladding thicknesses which affect the fill fraction. We compare the optical performance of all 6 bundles and find that the advantage of smaller interstitial holes (higher fill fraction) is outweighed by the increase in modal coupling, cross-talk and the poor optical performance caused by the deformation of the fibre cores. Uniformly high throughput and low cross-talk are essential for imaging faint astronomical targets with sufficient resolution to disentangle the dynamical structure. Devices already under development will have between 100 and 200 lightly-fused cores, although larger formats are feasible. The light-weight packaging of hexabundles is sufficiently flexible to allow existing robotic positioners to make use of them.
△ Less
Submitted 5 April, 2011;
originally announced April 2011.