-
Wakefield assisted bunch compression in storage rings
Authors:
Sergey A. Antipov,
Ilya Agapov,
Igor Zagorodnov,
Francois Lemery
Abstract:
Equilibrium bunch lengths typical to modern day light sources of tens of picoseconds limit the spectral reach of superradiant approaches for exploring materials and biological samples. In particular, generation of terahertz radiation seems appealing for pump-probe experiments. Taking advantage of self-wakes generated by carefully chosen structure one can control the bunch length and shape the bunc…
▽ More
Equilibrium bunch lengths typical to modern day light sources of tens of picoseconds limit the spectral reach of superradiant approaches for exploring materials and biological samples. In particular, generation of terahertz radiation seems appealing for pump-probe experiments. Taking advantage of self-wakes generated by carefully chosen structure one can control the bunch length and shape the bunch profile to increase significantly the high-frequency spectral components. Numerical analysis indicates the presence of self-consistent steady states that can be obtained with passive corrugated or dielectric structures. This approach has potential applications for generating superradiant terahertz radiation and pulse sha** in circular accelerators.
△ Less
Submitted 27 April, 2023; v1 submitted 10 June, 2022;
originally announced June 2022.
-
Advanced RF Structures for Wakefield Acceleration and High-Gradient Research
Authors:
Xueying Lu,
Jiahang Shao,
John Power,
Chunguang **g,
Gwanghui Ha,
Philippe Piot,
Alexander Zholents,
Richard Temkin,
Michael Shapiro,
Julian Picard,
Bagrat Grigoryan,
Chuanxiang Tang,
Yingchao Du,
Jiaru Shi,
Hao Zha,
Dao Xiang,
Emilio Nanni,
Brendan O'Shea,
Yuri Saveliev,
Thomas Pacey,
James Rosenzweig,
Gerard Andonian,
Evgenya Simakov,
Francois Lemery,
Alex Murokh
, et al. (6 additional authors not shown)
Abstract:
Structure wakefield acceleration (SWFA) is one of the most promising AAC schemes in several recent strategic reports, including DOE's 2016 AAC Roadmap, report on the Advanced and Novel Accelerators for High Energy Physics Roadmap (ANAR), and report on Accelerator and Beam Physics Research Goals and Opportunities. SWFA aims to raise the gradient beyond the limits of conventional radiofrequency (RF)…
▽ More
Structure wakefield acceleration (SWFA) is one of the most promising AAC schemes in several recent strategic reports, including DOE's 2016 AAC Roadmap, report on the Advanced and Novel Accelerators for High Energy Physics Roadmap (ANAR), and report on Accelerator and Beam Physics Research Goals and Opportunities. SWFA aims to raise the gradient beyond the limits of conventional radiofrequency (RF) accelerator technology, and thus the RF to beam energy efficiency, by reducing RF breakdowns from confining the microwave energy in a short (on the order of about 10 ns) and intense pulse excited by a drive beam. We envision that the following research topics, within the scope of AF7, are of great interest in the next decade: advanced wakefield structures, terahertz and sub-terahertz (THz) structures, and RF breakdown physics. Research on SWFA in the above directions would directly contribute to long-term large-scale applications, including AAC-based linear colliders and compact light sources. There is also potentially a strong synergy between SWFA and other AAC concepts, when structures are combined with plasmas into hybrid AAC schemes. Research on novel structures is at the core of advancing SWFA, and is critical to future AAC-based linear colliders; at the same, it has a strong synergy with other directions, such as cavity designs, high-power microwave systems and sources, and compact light sources.
△ Less
Submitted 23 March, 2022; v1 submitted 15 March, 2022;
originally announced March 2022.
-
Drive beam sources and longitudinal sha** techniques
Authors:
Francois Lemery,
Gerard Andonian,
Steffen Doebert,
Gwanghui Ha,
Xueying Lu,
John Power,
Eric Wisniewski
Abstract:
Linear colliders are an attractive platform to explore high-precision physics of newly discovered particles. The recent significant progress in advanced accelerator technologies has motivated their applications to colliders which has been discussed in the {\sc alegro} workshop. In this paper we discuss one promising scheme, collinear wakefield acceleration. We especially discuss available drive an…
▽ More
Linear colliders are an attractive platform to explore high-precision physics of newly discovered particles. The recent significant progress in advanced accelerator technologies has motivated their applications to colliders which has been discussed in the {\sc alegro} workshop. In this paper we discuss one promising scheme, collinear wakefield acceleration. We especially discuss available drive and witness beam sources based on L and S-band radiofrequency technology, and also summarize available and forthcoming longitudinal sha** techniques to improve the overall acceleration efficiency via the transformer ratio.
△ Less
Submitted 21 April, 2022; v1 submitted 15 February, 2022;
originally announced February 2022.
-
Commissioning results and electron beam characterization at the S-band photoinjector at SINBAD-ARES
Authors:
E. Panofski,
R. W. Assmann,
F. Burkart,
U. Dorda,
L. Genovese,
F. Jafarinia,
S. M. Jaster-Merz,
M. Kellermeier,
W. Kuropka,
F. Lemery,
B. Marchetti,
D. Marx,
F. Mayet,
T. Vinatier,
S. Yamin
Abstract:
Over the last years, the generation and acceleration of ultra-short, high quality electron beams has attracted more and more interest in accelerator science. Electron bunches with these properties are necessary to operate and test novel diagnostics and advanced high gradient accelerating schemes such as plasma accelerators or dielectric laser accelerators. Furthermore, several medical and industri…
▽ More
Over the last years, the generation and acceleration of ultra-short, high quality electron beams has attracted more and more interest in accelerator science. Electron bunches with these properties are necessary to operate and test novel diagnostics and advanced high gradient accelerating schemes such as plasma accelerators or dielectric laser accelerators. Furthermore, several medical and industrial applications require high-brightness electron beams. The dedicated R&D facility ARES at DESY will provide such probe beams in the upcoming years. After the setup of the normal-conducting RF photoinjector and linear accelerating structures, ARES successfully started the beam commissioning of the RF gun. This paper gives an overview of the ARES photoinjector setup and summarizes the results of the gun commissioning process. The quality of the first generated electron beams is characterized in terms of charge, momentum, momentum spread and beam size. Additionally, the dependencies of the beam parameters on RF settings are investigated. All measurement results of the characterized beams fulfill the requirements to operate the ARES linac with this RF photoinjector.
△ Less
Submitted 28 June, 2021;
originally announced June 2021.
-
Self-calibration technique for characterization of integrated THz waveguides
Authors:
Max Kellermeier,
Francois Lemery,
Klaus Floettmann,
Wolfgang Hillert,
Ralph Assmann
Abstract:
Emerging high-frequency accelerator technology in the terahertz regime is promising for the development of compact high-brightness accelerators and high resolution-power beam diagnostics. One resounding challenge when scaling to higher frequencies and to smaller structures is the proportional scaling of tolerances which can hinder the overall performance of the structure. Consequently, characteriz…
▽ More
Emerging high-frequency accelerator technology in the terahertz regime is promising for the development of compact high-brightness accelerators and high resolution-power beam diagnostics. One resounding challenge when scaling to higher frequencies and to smaller structures is the proportional scaling of tolerances which can hinder the overall performance of the structure. Consequently, characterizing these structures is essential for nominal operation. Here, we present a novel and simple self-calibration technique to characterize the dispersion relation of integrated hollow THz-waveguides. The developed model is verified in simulation by extracting dispersion characteristics of a standard waveguide a priori known by theory. The extracted phase velocity does not deviate from the true value by more than $ 9 \times 10^{-5} ~\%$. In experiments the method demonstrates its ability to measure dispersion characteristics of non-standard waveguides embedded with their couplers with an accuracy below $ \approx 0.5~\% $ and precision of $ \approx 0.05~\% $. Equipped with dielectric lining the metallic waveguides act as slow wave structures, and the dispersion curves are compared without and with dielectric. A phase synchronous mode, suitable for transverse deflection, is found at $ 275~\text{GHz} $.
△ Less
Submitted 3 April, 2021;
originally announced April 2021.
-
A final focus system for injection into a laser plasma accelerator at the ARES linac
Authors:
Sumera Yamin,
Ralph Assmann,
Florian Burkart,
Angel Ferren Pousa,
Wolfgang Hillert,
Francois Lemery,
Barbara Marchetti,
Eva Panofski
Abstract:
ARES (Accelerator Research Experiment at SINBAD) is a linear accelerator at the SINBAD (Short INnovative Bunches and Accelerators at DESY) facility at DESY. ARES was designed to combine reproducible beams from conventional RF-based accelerator technology with novel but still experimental acceleration techniques. It aims to produce high brightness ultra-short electron bunches in the range of sub fs…
▽ More
ARES (Accelerator Research Experiment at SINBAD) is a linear accelerator at the SINBAD (Short INnovative Bunches and Accelerators at DESY) facility at DESY. ARES was designed to combine reproducible beams from conventional RF-based accelerator technology with novel but still experimental acceleration techniques. It aims to produce high brightness ultra-short electron bunches in the range of sub fs to few fs, at a beam energy of 100-150 MeV, suitable for injection into novel acceleration experiments like Dielectric Laser Acceleration (DLA) and Laser driven Plasma Acceleration (LPA). This paper reports the conceptual design and simulations of a final focus system for injecting into a LPA experiment at ARES, including permanent magnetic quadrupoles (PMQ), sufficient longitudinal space for collinear laser and electron transport, space for required diagnostics and a LPA setup. Space-charge effects play a significant role and are included. Simulation results on the focusing of the ARES electron bunches into and their transport through the laser-driven plasma are presented. The effects of several errors have been simulated and are reported.
△ Less
Submitted 17 February, 2021;
originally announced February 2021.
-
Longitudinal phase space synthesis with tailored 3D-printable dielectric-lined waveguides
Authors:
Frank Mayet,
Ralph Assmann,
Francois Lemery
Abstract:
Longitudinal phase space manipulation is a critical and necessary component for advanced acceleration concepts, radiation sources and improving performances of X-ray free electron lasers. Here we present a simple and versatile method to semi-arbitrarily shape the longitudinal phase space of a charged bunch by using wakefields generated in tailored dielectric-lined waveguides. We apply the concept…
▽ More
Longitudinal phase space manipulation is a critical and necessary component for advanced acceleration concepts, radiation sources and improving performances of X-ray free electron lasers. Here we present a simple and versatile method to semi-arbitrarily shape the longitudinal phase space of a charged bunch by using wakefields generated in tailored dielectric-lined waveguides. We apply the concept in simulation and provide examples for radiation generation and bunch compression. We finally discuss the manufacturing capabilities of a modern 3D printer and investigate how printing limitations, as well as the shape of the input LPS affect the performance of the device.
△ Less
Submitted 25 September, 2020;
originally announced September 2020.
-
Superradiant Cherenkov-Wakefield radiation as THz source for FEL facilities
Authors:
Klaus Floettmann,
Francois Lemery,
Martin Dohlus,
Michaela Marx,
Mikayel Ivanyan,
Vasili Tsakanov
Abstract:
An electron beam passing through a tube which is lined on the inside with a dielectric layer will radiate energy in the THz range due to the interaction with the boundary. The resonant enhancement of certain frequencies is conditioned by structure parameters as tube radius and permittivity of the dielectric layer. In low loss structures narrow-band radiation is generated which can be coupled out b…
▽ More
An electron beam passing through a tube which is lined on the inside with a dielectric layer will radiate energy in the THz range due to the interaction with the boundary. The resonant enhancement of certain frequencies is conditioned by structure parameters as tube radius and permittivity of the dielectric layer. In low loss structures narrow-band radiation is generated which can be coupled out by suitable antennas. For higher frequencies the coupling to the resistive outer metal layer becomes increasingly important. The losses in the outer layer prohibit to reach high frequencies with narrow-band conditions. Instead short broad-band pulses can be generated with still attractive power levels. In the first section of the paper a general theory of the impedance of a two-layer structure is presented and the coupling to the outer resistive layer is discussed. Approximate relations for the radiated energy, power and pulse length for a set of structure parameters are derived and compared to numerical results in the following section. Finally first numerical result of the out-coupling of the radiation by means of a Vlasov antenna and estimates of the achieved beam quality are presented.
△ Less
Submitted 12 May, 2020;
originally announced May 2020.
-
35 megawatt multicycle THz pulses from a homemade periodically poled macrocrystal
Authors:
Francois Lemery,
Thomas Vinatier,
Frank Mayet,
Ralph Aßmann,
Elsa Baynard,
Julien Demailly,
Ulrich Dorda,
Bruno Lucas,
Alok-Kumar Pandey,
Moana Pittman
Abstract:
High-power multicycle THz radiation is highly sought after with applications in medicine, imaging, spectroscopy, characterization and manipulation of condensed matter, and could support the development of next-generation compact laser-based accelerators with applications in electron microscopy, ultrafast X-ray sources and sub-femtosecond longitudinal diagnostics. Multicycle THz-radiation can be ge…
▽ More
High-power multicycle THz radiation is highly sought after with applications in medicine, imaging, spectroscopy, characterization and manipulation of condensed matter, and could support the development of next-generation compact laser-based accelerators with applications in electron microscopy, ultrafast X-ray sources and sub-femtosecond longitudinal diagnostics. Multicycle THz-radiation can be generated by shooting an appropriate laser through a periodically poled nonlinear crystal, e.g. lithium niobate (PPLN). Unfortunately, the manufacturing processes of PPLNs require substantially strong electric fields $\mathcal{O}(10~kV/mm)$ across the crystal width to locally reverse the polarization domains; this limits the crystal apertures to below 1 cm. Damage threshold limitations of lithium niobate thereby limits the laser power which can be shone onto the crystal, which inherently limits the production of high-power THz pulses. Here we show that in the THz regime, a PPLN crystal can be mechanically constructed in-air by stacking lithium niobate wafers together with 180$^{\circ}$ rotations to each other. The relatively long (mm) wavelengths of the generated THz radiation compared to the small gaps ($\sim$10 $μ$m) between wafers supports a near-ideal THz transmission between wafers. We demonstrate the concept using a Joule-class laser system with $\sim$50 mm diameter wafers and measure up to 1.3 mJ of THz radiation corresponding to a peak power of $\sim$35 MW, a 50 times increase in THz power compared to previous demonstrations. Our results indicate that high-power THz radiation can be produced with existing and future high-power lasers in a scalable way, setting a course toward multi-gigawatt THz pulses. Moreover the simplicity of the scheme provides a simple way to synthesize waveforms for a variety of applications.
△ Less
Submitted 16 September, 2019;
originally announced September 2019.
-
Passive Ballistic Microbunching of Non-Ultrarelativistic Electron Bunches using Electromagnetic Wakefields in Dielectric-Lined Waveguides
Authors:
Francois Lemery,
Philippe Piot,
Gayane Amatuni,
Prach Boonpornprasert,
Ye Lining Chen,
James David Good,
Bagrat Grigoryan,
Matthias Gross,
Mikhail Krasilnikov,
Osip Lishilin,
Gregor Loisch,
Anne Oppelt,
Sebastian Philipp,
Houjun Qian,
Yves Renier,
Frank Stephan,
Igor Zagorodnov
Abstract:
Temporally-modulated electron beams have a wide array of applications ranging from the generation of coherently-enhanced electromagnetic radiation to the resonant excitation of electromagnetic wakefields in advanced-accelerator concepts. Likewise producing low-energy ultrashort microbunches could be useful for ultra-fast electron diffraction and new accelerator-based light-source concepts. In this…
▽ More
Temporally-modulated electron beams have a wide array of applications ranging from the generation of coherently-enhanced electromagnetic radiation to the resonant excitation of electromagnetic wakefields in advanced-accelerator concepts. Likewise producing low-energy ultrashort microbunches could be useful for ultra-fast electron diffraction and new accelerator-based light-source concepts. In this Letter we propose and experimentally demonstrate a passive microbunching technique capable of forming a picosecond bunch train at $\sim 6$~MeV. The method relies on the excitation of electromagnetic wakefields as the beam propagates through a dielectric-lined waveguide. Owing to the non-ultrarelativistic nature of the beam, the induced energy modulation eventually converts into a density modulation as the beam travels in a following free-space drift. The modulated beam is further accelerated to $\sim20$~MeV while preserving the imparted density modulation.
△ Less
Submitted 25 June, 2018;
originally announced June 2018.
-
Simulations on a potential hybrid and compact attosecond X-ray source based on RF and THz technologies
Authors:
T. Vinatier,
R. W. Assmann,
U. Dorda,
F. Lemery,
B. Marchetti
Abstract:
We investigate through beam dynamics simulations the potential of a hybrid layout mixing RF and THz technologies to be a compact X-ray source based on Inverse Compton Scattering (ICS), delivering few femtoseconds to sub-femtosecond pulses. The layout consists of an S-band gun as electron source and a dielectric-loaded circular waveguide driven by a multicycle THz pulse to accelerate and longitudin…
▽ More
We investigate through beam dynamics simulations the potential of a hybrid layout mixing RF and THz technologies to be a compact X-ray source based on Inverse Compton Scattering (ICS), delivering few femtoseconds to sub-femtosecond pulses. The layout consists of an S-band gun as electron source and a dielectric-loaded circular waveguide driven by a multicycle THz pulse to accelerate and longitudinally compress the bunch, which will then be used to produce X-ray pulses via ICS with an infrared laser pulse. The beam dynamics simulations we performed, from the photocathode up to the ICS point, allows to have an insight in several important physical effects for the proposed scheme and also in the influence on the achievable bunch properties of various parameters of the accelerating and transverse focusing devices. The study presented in this paper leads to a preliminary layout and set of parameters able to deliver at the ICS point, according to our simulations, ultrashort bunches (around 1 fs rms), at 15 MeV, with at least 1 pC charge and transversely focused down to around 10 um rms or below while kee** a compact beamline (less than 1.5 m), which has not yet been achieved using only conventional RF technologies. Future studies will be devoted to the investigation of several potential ways to improve the achieved bunch properties, to overcome the limitations identified in the current study and to the definition of the technical requirements. This will lead to an updated layout and set of parameters.
△ Less
Submitted 22 February, 2018;
originally announced February 2018.
-
An Adiabatic Phase-Matching Accelerator
Authors:
Francois Lemery,
Klaus Floettmann,
Philippe Piot,
Franz X. Kaertner,
Ralph Assmann
Abstract:
We present a general concept to accelerate non-relativistic charged particles. Our concept employs an adiabatically-tapered dielectric-lined waveguide which supports accelerating phase velocities for synchronous acceleration. We propose an ansatz for the transient field equations, show it satisfies Maxwell's equations under an adiabatic approximation and find excellent agreement with a finite-diff…
▽ More
We present a general concept to accelerate non-relativistic charged particles. Our concept employs an adiabatically-tapered dielectric-lined waveguide which supports accelerating phase velocities for synchronous acceleration. We propose an ansatz for the transient field equations, show it satisfies Maxwell's equations under an adiabatic approximation and find excellent agreement with a finite-difference time-domain computer simulation. The fields were implemented into the particle-tracking program {\sc astra} and we present beam dynamics results for an accelerating field with a 1-mm-wavelength and peak electric field of 100~MV/m. The numerical simulations indicate that a $\sim 200$-keV electron beam can be accelerated to an energy of $\sim10$~MeV over $\sim 10$~cm. The novel scheme is also found to form electron beams with parameters of interest to a wide range of applications including, e.g., future advanced accelerators, and ultra-fast electron diffraction.
△ Less
Submitted 22 December, 2017;
originally announced December 2017.
-
Tailored electron bunches with smooth current profiles for enhanced transformer ratios in beam-driven acceleration
Authors:
Francois Lemery,
Philippe Piot
Abstract:
Collinear high-gradient ${\cal O} (GV/m)$ beam-driven wakefield methods for charged-particle acceleration could be critical to the realization of compact, cost-efficient, accelerators, e.g., in support of TeV-scale lepton colliders or multiple-user free-electron laser facilities. To make these options viable, the high accelerating fields need to be complemented with large transformer ratios $>2$,…
▽ More
Collinear high-gradient ${\cal O} (GV/m)$ beam-driven wakefield methods for charged-particle acceleration could be critical to the realization of compact, cost-efficient, accelerators, e.g., in support of TeV-scale lepton colliders or multiple-user free-electron laser facilities. To make these options viable, the high accelerating fields need to be complemented with large transformer ratios $>2$, a parameter characterizing the efficiency of the energy transfer between a wakefield-exciting "drive" bunch to an accelerated "witness" bunch. While several potential current distributions have been discussed, their practical realization appears challenging due to their often discontinuous nature. In this paper we propose several alternative current profiles which are smooth which also lead to enhanced transformer ratios. We especially explore a laser-sha** method capable of generating one the suggested distributions directly out of a photoinjector and discuss a linac concept that could possible drive a dielectric accelerator.
△ Less
Submitted 22 May, 2015;
originally announced May 2015.
-
Ballistic Bunching of Photo-Injected Electron Bunches with Dielectric-Lined Waveguide
Authors:
F. Lemery,
P. Piot
Abstract:
We describe a simple technique to passively bunch non-ultrarelativistics ($\lesssim 10$~MeV) electron bunches produced in conventional photoinjectors. The scheme employs a dielectric-lined waveguide located downstream of the electron source to impress an energy modulation on a picosecond bunch. The energy modulation is then converted into a density modulation via ballistic bunching. The method is…
▽ More
We describe a simple technique to passively bunch non-ultrarelativistics ($\lesssim 10$~MeV) electron bunches produced in conventional photoinjectors. The scheme employs a dielectric-lined waveguide located downstream of the electron source to impress an energy modulation on a picosecond bunch. The energy modulation is then converted into a density modulation via ballistic bunching. The method is shown to support the generation of sub-picosecond bunch train with multi-kA peak currents. The relatively simple technique is expected to find applications in compact, accelerator-based, light sources and advanced beam-driven accelerator methods.
△ Less
Submitted 3 July, 2014;
originally announced July 2014.
-
Generation and Characterization of Electron Bunches with Ramped Current Profiles in a Dual-Frequency Superconducting Linear Accelerator
Authors:
P. Piot,
C. Behrens,
C. Gerth,
M. Dohlus,
F. Lemery,
D. Mihalcea,
P. Stoltz,
M. Vogt
Abstract:
We report on the successful experimental generation of electron bunches with ramped current profiles. The technique relies on impressing nonlinear correlations in the longitudinal phase space using a superconducing radiofrequency linear accelerator operating at two frequencies and a current-enhancing dispersive section. The produced $\sim 700$-MeV bunches have peak currents of the order of a kilo-…
▽ More
We report on the successful experimental generation of electron bunches with ramped current profiles. The technique relies on impressing nonlinear correlations in the longitudinal phase space using a superconducing radiofrequency linear accelerator operating at two frequencies and a current-enhancing dispersive section. The produced $\sim 700$-MeV bunches have peak currents of the order of a kilo-Ampère. Data taken for various accelerator settings demonstrate the versatility of the method and in particular its ability to produce current profiles that have a quasi-linear dependency on the longitudinal (temporal) coordinate. The measured bunch parameters are shown, via numerical simulations, to produce gigavolt-per-meter peak accelerating electric fields with transformer ratios larger than 2 in dielectric-lined waveguides.
△ Less
Submitted 7 September, 2011;
originally announced September 2011.