-
Single scan STEM-EMCD in 3-beam orientation using a quadruple aperture
Authors:
Hasan Ali,
Sharath Kumar Manjeshwar Sathyanath,
Cheuk-Wai Tai,
Jan Rusz,
Toni Uusimaki,
Björgvin Hjörvarsson,
Thomas Thersleff,
Klaus Leifer
Abstract:
The need to acquire multiple angle-resolved electron energy loss spectra (EELS) is one of the several critical challenges associated with electron magnetic circular dichroism (EMCD) experiments. If the experiments are performed by scanning a nanometer to atomic-sized electron probe on a specific region of a sample, the precision of the local magnetic information extracted from such data highly dep…
▽ More
The need to acquire multiple angle-resolved electron energy loss spectra (EELS) is one of the several critical challenges associated with electron magnetic circular dichroism (EMCD) experiments. If the experiments are performed by scanning a nanometer to atomic-sized electron probe on a specific region of a sample, the precision of the local magnetic information extracted from such data highly depends on the accuracy of the spatial registration between multiple scans. For an EMCD experiment in a 3-beam orientation, this means that the same specimen area must be scanned four times while kee** all the experimental conditions same. This is a non-trivial task as there is a high chance of morphological and chemical modification as well as non-systematic local orientation variations of the crystal between the different scans due to beam damage, contamination and spatial drift. In this work, we employ a custom-made quadruple aperture to acquire the four EELS spectra needed for the EMCD analysis in a single electron beam scan, thus removing the above-mentioned complexities. We demonstrate a quantitative EMCD result for a beam convergence angle corresponding to sub-nm probe size and compare the EMCD results for different detector geometries.
△ Less
Submitted 16 November, 2022;
originally announced November 2022.
-
Simultaneous map** of EMCD signals and crystal orientations in a transmission electron microscope
Authors:
Hasan Ali,
Jan Rusz,
Tobias Warnatz,
Björgvin Hjörvarsson,
Klaus Leifer
Abstract:
When magnetic properties are analysed in a TEM using the technique of electron magnetic circular dichroism (EMCD), one of the critical parameters is the sample orientation, and this, independently on the chosen acquisition geometry. Since small orientation changes can have a strong impact on the EMCD measurement, it is experimentally non trivial to measure the EMCD signal as a function of sample o…
▽ More
When magnetic properties are analysed in a TEM using the technique of electron magnetic circular dichroism (EMCD), one of the critical parameters is the sample orientation, and this, independently on the chosen acquisition geometry. Since small orientation changes can have a strong impact on the EMCD measurement, it is experimentally non trivial to measure the EMCD signal as a function of sample orientation. The classical EMCD experimental setup requires to tilt the crystal in a 2 beam orientation and to acquire two electron energy loss spectra at two conjugate scattering angles. The effect of a mistilt from the perfect 2-beam orientation on the measured EMCD signals has not been explored yet due to different experimental constraints. In order to maintain the exact sample location and orientation for the acquisition of the EMCD signal, we have developed a methodology to simultaneously map the quantitative EMCD signals and the local orientation of the crystal. We analyse, both experimentally and with simulations, how the measured magnetic signals evolve with a change in the crystal tilt from the exact 2-beam orientation. Based on this analysis, we establish an accurate relationship between the crystal orientations and the EMCD signals. Our results demonstrate that a small crystal tilt away from the 2-beam orientation can significantly alter the strength and the distribution of the EMCD signals. From an optimisation of the crystal orientation, we obtain quantitative EMCD measurements.
△ Less
Submitted 13 December, 2019;
originally announced December 2019.
-
Enabling atomic resolution in convergent beam EMCD measurements by the use of patterned apertures
Authors:
Hasan Ali,
Devendra Negi,
Tobias Warnatz,
Björgvin Hjörvarsson,
Jan Rusz,
Klaus Leifer
Abstract:
We give an experimental demonstration of two types of recently proposed ventilator apertures which can be used to acquire electron magnetic circular dichroic (EMCD) signals in zone axis orientation with high spatial resolution. To simplify the experimental procedures, we propose a third type of aperture and experimentally demonstrate the use of this modified ventilator aperture for the case of mul…
▽ More
We give an experimental demonstration of two types of recently proposed ventilator apertures which can be used to acquire electron magnetic circular dichroic (EMCD) signals in zone axis orientation with high spatial resolution. To simplify the experimental procedures, we propose a third type of aperture and experimentally demonstrate the use of this modified ventilator aperture for the case of multiple symmetries in the diffraction patterns. To show the feasibility of the atomic resolution EMCD, EMCD signals are acquired for a range of beam convergence angles. High quality EMCD signals with convergence angles corresponding to atomic resolution electron probes are obtained.
△ Less
Submitted 30 August, 2019;
originally announced August 2019.
-
Quantitative analysis of magnetic spin and orbital moments from an oxidized iron (1 1 0) surface using electron magnetic circular dichroism
Authors:
Thomas Thersleff,
Jan Rusz,
Stefano Rubino,
Björgvin Hjörvarsson,
Yasuo Ito,
Nestor Zaluzec,
Klaus Leifer
Abstract:
Understanding the ramifications of reduced crystalline symmetry on magnetic behavior is a critical step in improving our understanding of nanoscale and interfacial magnetism. However, investigations of such effects are often controversial largely due to the challenges inherent in directly correlating nanoscale stoichiometry and structure to magnetic behavior. Here, we describe how to use Transmiss…
▽ More
Understanding the ramifications of reduced crystalline symmetry on magnetic behavior is a critical step in improving our understanding of nanoscale and interfacial magnetism. However, investigations of such effects are often controversial largely due to the challenges inherent in directly correlating nanoscale stoichiometry and structure to magnetic behavior. Here, we describe how to use Transmission Electron Microscope (TEM) to obtain Electron Magnetic Circular Dichroism (EMCD) signals as a function of scattering angle to locally probe the magnetic behavior of thin oxide layers grown on an Fe (1 1 0) surface. Experiments and simulations both reveal a strong dependence of the magnetic orbital to spin ratio on its scattering vector in reciprocal space. We exploit this variation to extract the magnetic properties of the oxide cladding layer, showing that it locally may exhibit an enhanced orbital to spin moment ratio. This finding is supported here by both spatially and angularly resolved EMCD measurements, opening up the way for compelling investigations into how magnetic properties are affected by nanoscale features.
△ Less
Submitted 17 July, 2015; v1 submitted 26 March, 2015;
originally announced March 2015.
-
arXiv:1210.2307
[pdf]
cond-mat.mtrl-sci
cond-mat.mes-hall
cond-mat.soft
physics.chem-ph
physics.data-an
A simple TEM method for fast thickness characterization of suspended graphene flakes
Authors:
Sultan Akhtar,
Stefano Rubino,
Klaus Leifer
Abstract:
We present a simple and fast method for thickness characterization of suspended graphene flakes that is based on transmission electron microscopy (TEM) techniques. For this method, the dynamical theory of electron diffraction (Bloch-wave approach in two-beam case approximation) was used to obtain an analytical expression for the intensity of the transmitted electron beam I0(t), as function of the…
▽ More
We present a simple and fast method for thickness characterization of suspended graphene flakes that is based on transmission electron microscopy (TEM) techniques. For this method, the dynamical theory of electron diffraction (Bloch-wave approach in two-beam case approximation) was used to obtain an analytical expression for the intensity of the transmitted electron beam I0(t), as function of the specimen thickness t for thin samples (t<< λ; where λ is the absorption constant for graphite). We show that in thin graphite crystals the transmitted intensity is a linear function of the thickness. To obtain a more quantitative description of I0(t), high resolution (HR) TEM simulations are performed using the Bloch wave approach of the JEMS software. From such calculations, we obtain λ for a 001 zone axis orientation, in a two-beam case and in a low symmetry orientation. Subsequently, HR (used to determine t) and bright-field (to measure I0(0) and I0(t)) images were acquired to experimentally determine λ. We obtain that the experimental value in the low symmetry orientation is close to the calculated value (i.e. λ=225 nm for 300 kV accelerating voltage and 3 mrad collection angle). The simulations also show that the linear approximation obtained from the analytical expression is valid up to a sample thickness of several ten nanometers, depending on the orientation. When compared to standard techniques for thickness determination of graphene/graphite, the method we propose has the advantage of being relatively simple and fast, requiring only the acquisition of bright-field images.
△ Less
Submitted 8 October, 2012;
originally announced October 2012.
-
Decomposition, diffusion, and growth rate anisotropies in self-limited profiles during metalorganic vapor-phase epitaxy of seeded nanostructures
Authors:
E. Pelucchi,
V. Dimastrodonato,
A. Rudra,
K. Leifer,
E. Kapon,
L. Bethke,
P. Zestanakis,
D. D. Vvedensky
Abstract:
We present a model for the interplay between the fundamental phenomena responsible for the formation of nanostructures by metalorganic vapour phase epitaxy on patterned (001)/(111)B GaAs substrates. Experiments have demonstrated that V-groove quantum wires and pyramidal quantum dots form as a consequence of a self-limiting profile that develops, respectively, at the bottom of V-grooves and inverte…
▽ More
We present a model for the interplay between the fundamental phenomena responsible for the formation of nanostructures by metalorganic vapour phase epitaxy on patterned (001)/(111)B GaAs substrates. Experiments have demonstrated that V-groove quantum wires and pyramidal quantum dots form as a consequence of a self-limiting profile that develops, respectively, at the bottom of V-grooves and inverted pyramids. Our model is based on a system of reaction-diffusion equations, one for each crystallographic facet that defines the pattern, and include the group III precursors, their decomposition and diffusion kinetics (for which we discuss the experimental evidence), and the subsequent diffusion and incorporation kinetics of the group-III atoms released by the precursors. This approach can be applied to any facet configuration, including pyramidal quantum dots, but we focus on the particular case of V-groove templates and offer an explanation for the self-limited profile and the Ga segregation observed in the V-groove. The explicit inclusion of the precursor decomposition kinetics and the diffusion of the atomic species revises and generalizes the earlier work of Basiol et al. [Phys. Rev. Lett. 81, 2962 (1998); Phys. Rev. B 65, 205306 (2002)] and is shown to be essential for obtaining a complete description of self-limiting growth. The solution of the system of equations yields spatially resolved adatom concentrations, from which average facet growth rates are calculated. This provides the basis for determining the conditions that yield selflimiting growth. The foregoing scenario, previously used to account for the growth modes of vicinal GaAs(001) during MOVPE and the step-edge profiles on the ridges of vicinal surfaces patterned with V-grooves, can be used to describe the morphological evolution of any template composed of distinct facets.
△ Less
Submitted 16 August, 2011;
originally announced August 2011.
-
Influence of plural scattering on the quantitative determination of spin and orbital moments in electron magnetic circular dichroism measurements
Authors:
Jan Rusz,
Hans Lidbaum,
Stefano Rubino,
Bjorgvin Hjorvarsson,
Peter M. Oppeneer,
Olle Eriksson,
Klaus Leifer
Abstract:
Recent quantitative measurements of the orbital to spin magnetic moment ratio $m_L/m_S$ in electron magnetic circular dichroism (EMCD) experiments have given a $m_L/m_S$ ratio that is larger than commonly accepted values. We demonstrate here that plural scattering may noticeably influence the $m_L/m_S$ ratio. An equation is derived which describes its influence as a function of the spectral inte…
▽ More
Recent quantitative measurements of the orbital to spin magnetic moment ratio $m_L/m_S$ in electron magnetic circular dichroism (EMCD) experiments have given a $m_L/m_S$ ratio that is larger than commonly accepted values. We demonstrate here that plural scattering may noticeably influence the $m_L/m_S$ ratio. An equation is derived which describes its influence as a function of the spectral integrals of the plasmon scattering region and zero-loss peak. The influence of the electron-plasmon scattering can be removed when electron energy-loss spectra of the ionization edge are deconvoluted by the low-loss signal. For a bcc-Fe sample we obtain $m_L/m_S=0.04$ after plasmon removal. We conclude that the plural scattering should be considered when extracting quantitative information from EMCD measurements.
△ Less
Submitted 7 October, 2009;
originally announced October 2009.
-
Reciprocal and real space maps for EMCD experiments
Authors:
Hans Lidbaum,
Jan Rusz,
Stefano Rubino,
Andreas Liebig,
Bjorgvin Hjorvarsson,
Peter M. Oppeneer,
Olle Eriksson,
Klaus Leifer
Abstract:
Electron magnetic chiral dichroism (EMCD) is an emerging tool for quantitative measurements of magnetic properties using the transmission electron microscope (TEM), with the possibility of nanometer resolution. The geometrical conditions, data treatment and electron gun settings are found to influence the EMCD signal. In this article, particular care is taken to obtain a reliable quantitative me…
▽ More
Electron magnetic chiral dichroism (EMCD) is an emerging tool for quantitative measurements of magnetic properties using the transmission electron microscope (TEM), with the possibility of nanometer resolution. The geometrical conditions, data treatment and electron gun settings are found to influence the EMCD signal. In this article, particular care is taken to obtain a reliable quantitative measurement of the ratio of orbital to spin magnetic moment using energy filtered diffraction patterns. For this purpose, we describe a method for data treatment, normalization and selection of mirror axis. The experimental results are supported by theoretical simulations based on dynamical diffraction and density functional theory. Special settings of the electron gun, so called telefocus mode, enable a higher intensity of the electron beam, as well as a reduction of the influence from artifacts on the signal. Using these settings, we demonstrate the principle of acquiring real space maps of the EMCD signal. This enables advanced characterization of magnetic materials with superior spatial resolution.
△ Less
Submitted 27 August, 2009;
originally announced August 2009.
-
Mild sonochemical exfoliation of bromine-intercalated graphite: a new route towards graphene
Authors:
E. Widenkvist,
D. W. Boukhvalov,
S. Rubino,
S. Akhtar,
J. Lu,
R. A. Quinlan,
M. I. Katsnelson,
K. Leifer,
H. Grennberg,
U. Jansson
Abstract:
A method to produce suspensions of graphene sheets by combining solution-based bromine intercalation and mild sonochemical exfoliation is presented. Ultrasonic treatment of graphite in water leads to the formation of suspensions of graphite flakes. The delamination is dramatically improved by intercalation of bromine into the graphite before sonication. The bromine intercalation was verified by…
▽ More
A method to produce suspensions of graphene sheets by combining solution-based bromine intercalation and mild sonochemical exfoliation is presented. Ultrasonic treatment of graphite in water leads to the formation of suspensions of graphite flakes. The delamination is dramatically improved by intercalation of bromine into the graphite before sonication. The bromine intercalation was verified by Raman spectroscopy as well as by x-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) calculations show an almost ten times lower interlayer binding energy after introducing Br2 into the graphite. Analysis of the suspended material by transmission and scanning electron microscopy (TEM and SEM) revealed a significant content of few-layer graphene with sizes up to 30 $mu$m, corresponding to the grain size of the starting material.
△ Less
Submitted 27 May, 2009;
originally announced May 2009.
-
Conductivity engineering of graphene by defect formation
Authors:
S. H. M. Jafri,
Karel Carva,
Erika Widenkvist,
Tobias Blom,
Biplab Sanyal,
Jonas Fransson,
Olle Eriksson,
Ulf Jansson,
Helena Grennberg,
Olof Karis,
R. Quinlan,
B. C. Holloway,
Klaus leifer
Abstract:
Transport measurements have revealed several exotic electronic properties of graphene. The possibility to influence the electronic structure and hence control the conductivity by adsorption or do** with adatoms is crucial in view of electronics applications. Here, we show that in contrast to expectation, the conductivity of graphene increases with increasing concentration of vacancy defects, b…
▽ More
Transport measurements have revealed several exotic electronic properties of graphene. The possibility to influence the electronic structure and hence control the conductivity by adsorption or do** with adatoms is crucial in view of electronics applications. Here, we show that in contrast to expectation, the conductivity of graphene increases with increasing concentration of vacancy defects, by more than one order of magnitude. We obtain a pronounced enhancement of the conductivity after insertion of defects by both quantum mechanical transport calculations as well as experimental studies of carbon nano-sheets. Our finding is attributed to the defect induced mid-gap states, which create a region exhibiting metallic behavior around the vacancy defects. The modification of the conductivity of graphene by the implementation of stable defects is crucial for the creation of electronic junctions in graphene-based electronics devices.
△ Less
Submitted 8 May, 2009;
originally announced May 2009.
-
Quantitative magnetic information from reciprocal space maps in transmission electron microscopy
Authors:
Hans Lidbaum,
Ján Rusz,
Andreas Liebig,
Björgvin Hjörvarsson,
Peter M. Oppeneer,
Ernesto Coronel,
Olle Eriksson,
Klaus Leifer
Abstract:
One of the most challenging issues in the characterization of magnetic materials is to obtain quantitative analysis on the nanometer scale. Here we describe how electron magnetic circular dichroism (EMCD) measurements using the transmission electron microscope (TEM) can be used for that purpose, utilizing reciprocal space maps. Applying the EMCD sum rules, an orbital to spin moment ratio of…
▽ More
One of the most challenging issues in the characterization of magnetic materials is to obtain quantitative analysis on the nanometer scale. Here we describe how electron magnetic circular dichroism (EMCD) measurements using the transmission electron microscope (TEM) can be used for that purpose, utilizing reciprocal space maps. Applying the EMCD sum rules, an orbital to spin moment ratio of $m_L/m_S=0.08 \pm 0.01$ is obtained for Fe, which is consistent with the commonly accepted value. Hence, we establish EMCD as a quantitative element specific technique for magnetic studies, using a widely available instrument with superior spatial resolution.
△ Less
Submitted 24 February, 2009; v1 submitted 11 July, 2008;
originally announced July 2008.
-
Enhancement of the Binding Energy of Charged Excitons in Disordered Quantum Wires
Authors:
T. Otterburg,
D. Y. Oberli,
M. -A. Dupertuis,
N. Moret,
E. Pelucchi,
B. Dwir,
K. Leifer,
E. Kapon
Abstract:
Negatively and positively charged excitons are identified in the spatially-resolved photoluminescence spectra of quantum wires. We demonstrate that charged excitons are weakly localized in disordered quantum wires. As a consequence, the enhancement of the "binding energy" of a charged exciton is caused, for a significant part, by the recoil energy transferred to the remaining charged carrier dur…
▽ More
Negatively and positively charged excitons are identified in the spatially-resolved photoluminescence spectra of quantum wires. We demonstrate that charged excitons are weakly localized in disordered quantum wires. As a consequence, the enhancement of the "binding energy" of a charged exciton is caused, for a significant part, by the recoil energy transferred to the remaining charged carrier during its radiative recombination. We discover that the Coulomb correlation energy is not the sole origin of the "binding energy", in contrast to charged excitons confined in quantum dots.
△ Less
Submitted 4 October, 2004;
originally announced October 2004.