-
Nanosecond Electron Holography by Interference Gating
Authors:
Tolga Wagner,
Tore Niermann,
Felix Urban,
Michael Lehmann
Abstract:
The interference gating is a novel method for robust time-resolved electron holographic measurements by directly switching the interference. Here, a new arrangement is presented in which a biprism in the condenser aperture as a fast electric phase shifter is used to control the interference pattern. High-frequency stimulation of the electric phase shifter in the gigahertz range are performed and o…
▽ More
The interference gating is a novel method for robust time-resolved electron holographic measurements by directly switching the interference. Here, a new arrangement is presented in which a biprism in the condenser aperture as a fast electric phase shifter is used to control the interference pattern. High-frequency stimulation of the electric phase shifter in the gigahertz range are performed and observed via electron holography, proving the feasibility of interference gating in the upper picosecond range. Despite the bandwidth limitation of 180~MHz of the current signal generator, a time resolution of 100 nanoseconds is achieved through forward correction of the control signal. With this time resolution, it is already possible to measure the transient response of the biasing holder system. Our method paves the way towards a closer look on fast dynamic processes with high temporal and spatial resolution.
△ Less
Submitted 14 May, 2024;
originally announced May 2024.
-
Imaging Localized Variable Capacitance During Switching Processes in Silicon Diodes by Time-Resolved Electron Holography
Authors:
Tolga Wagner,
Hüseyin Çelik,
Dirk Berger,
Ines Häusler,
Michael Lehmann
Abstract:
Interference Gating or iGate is a unique method for ultrafast time-resolved electron holography in a transmission electron microscope enabling a spatiotemporal resolution in the nm and ns regime with a minimal technological effort. Here, iGate is used for the first image-based investigation of the local dynamics of the projected electric potential in the area of the space charge region of two diff…
▽ More
Interference Gating or iGate is a unique method for ultrafast time-resolved electron holography in a transmission electron microscope enabling a spatiotemporal resolution in the nm and ns regime with a minimal technological effort. Here, iGate is used for the first image-based investigation of the local dynamics of the projected electric potential in the area of the space charge region of two different general purpose silicon diodes during switching between unbiased and reverse biased condition with a temporal resolution of 25ns at a repetition rate of 3MHz. The obtained results for a focus-ion-beam-prepared ultrafast UG1A rectifier diode, which shows a decreasing capacitance with increasing reverse bias are in good agreement with an electric characterization of the macroscopic device as well as with theoretical expectations. For a severely modified 1N4007 device, however, time-resolved electron holography revealed a MOSCAP-like behavior with a rising capacitance in the area of the space charge region during the switching into reverse biased condition. Remarkably, a different behavior, dominated by the effective capacitance of the electrical setup, can be observed in the vacuum region outside both devices within the same measurements, clearly showing the benefits of localized dynamic potentiometry.
△ Less
Submitted 15 May, 2024; v1 submitted 14 May, 2024;
originally announced May 2024.
-
Convective overstability in radially global protoplanetary disks I -- Pure gas dynamics
Authors:
Marius Lehmann,
Min-Kai Lin
Abstract:
Protoplanetary disks are prone to several hydrodynamic instabilities. One candidate, Convective Overstability (COS), can drive radial semi-convection that may influence dust dynamics and planetesimal formation. However, the COS has primarily been studied in local models. This paper investigates the COS near the mid-plane of radially global disk models. We first conduct a global linear stability an…
▽ More
Protoplanetary disks are prone to several hydrodynamic instabilities. One candidate, Convective Overstability (COS), can drive radial semi-convection that may influence dust dynamics and planetesimal formation. However, the COS has primarily been studied in local models. This paper investigates the COS near the mid-plane of radially global disk models. We first conduct a global linear stability analysis, which shows that linear COS modes exist only radially inward of their Lindblad resonance (LR). The fastest-growing modes have LRs near the inner radial domain boundary with effective radial wavelengths that can be a substantial fraction of the disk radius. We then perform axisymmetric global simulations and find that the COS's nonlinear saturation is similar to previous incompressible shearing box simulations. In particular, we observe the onset of persistent zonal and elevator flows for sufficiently steep radial entropy gradients. In full 3D, non-axisymmetric global simulations, we find the COS produces large-scale, long-lived vortices, which induce outward radial transport of angular momentum via the excitation of spiral density waves. The corresponding $α$-viscosity values of order $10^{-3}$ agree well with those found in previous 3D compressible shearing box simulations. However, in global disks, significant modifications to their radial structure are found, including the formation of pressure bumps. Interestingly, the COS typically generates an outward radial mass transport, i.e. decretion. We briefly discuss the possible implications of our results for planetesimal formation and for interpreting dust rings and asymmetries observed in protoplanetary disks.
△ Less
Submitted 8 May, 2024;
originally announced May 2024.
-
The Definitive Guide to Policy Gradients in Deep Reinforcement Learning: Theory, Algorithms and Implementations
Authors:
Matthias Lehmann
Abstract:
In recent years, various powerful policy gradient algorithms have been proposed in deep reinforcement learning. While all these algorithms build on the Policy Gradient Theorem, the specific design choices differ significantly across algorithms. We provide a holistic overview of on-policy policy gradient algorithms to facilitate the understanding of both their theoretical foundations and their prac…
▽ More
In recent years, various powerful policy gradient algorithms have been proposed in deep reinforcement learning. While all these algorithms build on the Policy Gradient Theorem, the specific design choices differ significantly across algorithms. We provide a holistic overview of on-policy policy gradient algorithms to facilitate the understanding of both their theoretical foundations and their practical implementations. In this overview, we include a detailed proof of the continuous version of the Policy Gradient Theorem, convergence results and a comprehensive discussion of practical algorithms. We compare the most prominent algorithms on continuous control environments and provide insights on the benefits of regularization. All code is available at https://github.com/Matt00n/PolicyGradientsJax.
△ Less
Submitted 1 March, 2024; v1 submitted 24 January, 2024;
originally announced January 2024.
-
Viscous overstability in dense planetary rings -- Effect of vertical motions and dense packing
Authors:
Marius Lehmann,
Heikki Salo
Abstract:
We investigate the linear axisymmetric viscous overstability in dense planetary rings with typical values of the dynamical optical depth $τ\gtrsim 0.5$. We develop a granular flow model which accounts for the particulate nature of a planetary ring subjected to dissipative particle collisions. The model captures the dynamical evolution of the disc's vertical thickness, temperature, and effects rela…
▽ More
We investigate the linear axisymmetric viscous overstability in dense planetary rings with typical values of the dynamical optical depth $τ\gtrsim 0.5$. We develop a granular flow model which accounts for the particulate nature of a planetary ring subjected to dissipative particle collisions. The model captures the dynamical evolution of the disc's vertical thickness, temperature, and effects related to a finite volume filling factor of the ring fluid. We compute equilibrium states of self-gravitating and non-self-gravitating rings, which compare well with existing results from kinetic models and N-Body simulations. Subsequently, we conduct a linear stability analysis of our model. We briefly discuss the different linear eigenmodes of the system and compare with existing literature by applying corresponding limiting approximations. We then focus on the viscous overstability, analysing the effect of temperature variations, radial and vertical self-gravity, and for the first time the effects of vertical motions on the instability. In addition, we perform local N-body simulations incorporating radial and vertical self-gravity. Critical values for the optical depth and the filling factor for the onset of instability resulting from our N-body simulations compare well with our model predictions under the neglect of radial self-gravity. When radial self-gravity is included, agreement with N-body simulations can be achieved by adopting enhanced values of the bulk viscous stress.
△ Less
Submitted 21 December, 2023;
originally announced December 2023.
-
Filament formation due to diffusive instabilities in dusty protoplanetary disks
Authors:
Konstantin Gerbig,
Min-Kai Lin,
Marius Lehmann
Abstract:
We report the finding of a new, local diffusion instability in a protoplanetary disk, which can operate in a dust fluid, subject to mass diffusion, shear viscosity, and dust-gas drag, provided diffusivity, viscosity, or both decrease sufficiently rapidly with increasing dust surface mass density. We devise a vertically averaged, axisymmetric hydrodynamic model to describe a dense, mid-plane dust l…
▽ More
We report the finding of a new, local diffusion instability in a protoplanetary disk, which can operate in a dust fluid, subject to mass diffusion, shear viscosity, and dust-gas drag, provided diffusivity, viscosity, or both decrease sufficiently rapidly with increasing dust surface mass density. We devise a vertically averaged, axisymmetric hydrodynamic model to describe a dense, mid-plane dust layer in a protoplanetary disk. The gas is modeled as a passive component, imposing an effective, diffusion-dependent pressure, mass diffusivity, and viscosity onto the otherwise collisionless dust fluid, via turbulence excited by the gas alone, or dust and gas in combination. In particular, we argue that such conditions are met when the dust-gas mixture generates small-scale turbulence through the streaming instability, as supported by recent measurements of dust mass diffusion slopes in simulations. We hypothesize that the newly discovered instability may be the origin of filamentary features, almost ubiquitously found in simulations of the streaming instability. In addition, our model allows for growing oscillatory modes, which operate in a similar fashion as the axisymmetric viscous overstability in dense planetary rings. However, it remains speculative if the required conditions for such modes can be met in protoplanetary disks.
△ Less
Submitted 29 November, 2023;
originally announced November 2023.
-
Instabilities in dusty non-isothermal proto-planetary discs
Authors:
Marius Lehmann,
Min-Kai Lin
Abstract:
Protoplanetary discs (PPDs) can host a number of instabilities that may partake directly or indirectly in the process of planetesimal formation. These include the Vertical Shear Instability (VSI), Convective Overstability (COS), Streaming Instability (SI), and Dust Settling Instability (DSI), to name a few. Notably, the VSI and COS have mostly been studied in purely gaseous discs, while the SI and…
▽ More
Protoplanetary discs (PPDs) can host a number of instabilities that may partake directly or indirectly in the process of planetesimal formation. These include the Vertical Shear Instability (VSI), Convective Overstability (COS), Streaming Instability (SI), and Dust Settling Instability (DSI), to name a few. Notably, the VSI and COS have mostly been studied in purely gaseous discs, while the SI and DSI have only been analyzed in isothermal discs. How these instabilities operate under more general conditions is therefore unclear. To this end, we devise a local model of a PPD describing a non-isothermal gas interacting with a single species of dust via drag forces. Using this, we find that dust drag sets minimum length scales below which the VSI and COS are suppressed. Similarly, we find that the SI can be suppressed on sufficiently small scales by the gas' radial buoyancy if it cools on roughly a dynamical timescale. We show that the DSI can be effectively stabilized by vertical buoyancy, except at special radial and vertical length scales. We also find novel instabilities unique to a dusty, non-isothermal gas. These result in a dusty analog of the COS that operates in slowly cooled discs, and a dusty version of the VSI that is strongly enhanced by dust settling. We briefly discuss the possible implications of our results on planetesimal formation.
△ Less
Submitted 3 May, 2023;
originally announced May 2023.
-
Comparison of free-surface and conservative Allen-Cahn phase-field lattice Boltzmann method
Authors:
Christoph Schwarzmeier,
Markus Holzer,
Travis Mitchell,
Moritz Lehmann,
Fabian Häusl,
Ulrich Rüde
Abstract:
This study compares the free-surface lattice Boltzmann method (FSLBM) with the conservative Allen-Cahn phase-field lattice Boltzmann method (PFLBM) in their ability to model two-phase flows in which the behavior of the system is dominated by the heavy phase. Both models are introduced and their individual properties, strengths and weaknesses are thoroughly discussed. Six numerical benchmark cases…
▽ More
This study compares the free-surface lattice Boltzmann method (FSLBM) with the conservative Allen-Cahn phase-field lattice Boltzmann method (PFLBM) in their ability to model two-phase flows in which the behavior of the system is dominated by the heavy phase. Both models are introduced and their individual properties, strengths and weaknesses are thoroughly discussed. Six numerical benchmark cases were simulated with both models, including (i) a standing gravity and (ii) capillary wave, (iii) an unconfined rising gas bubble in liquid, (iv) a Taylor bubble in a cylindrical tube, and (v) the vertical and (vi) oblique impact of a drop into a pool of liquid. Comparing the simulation results with either analytical models or experimental data from the literature, four major observations were made. Firstly, the PFLBM selected was able to simulate flows purely governed by surface tension with reasonable accuracy. Secondly, the FSLBM, a sharp interface model, generally requires a lower resolution than the PFLBM, a diffuse interface model. However, in the limit case of a standing wave, this was not observed. Thirdly, in simulations of a bubble moving in a liquid, the FSLBM accurately predicted the bubble's shape and rise velocity with low computational resolution. Finally, the PFLBM's accuracy is found to be sensitive to the choice of the model's mobility parameter and interface width.
△ Less
Submitted 24 November, 2022; v1 submitted 23 June, 2022;
originally announced June 2022.
-
On the accuracy and performance of the lattice Boltzmann method with 64-bit, 32-bit and novel 16-bit number formats
Authors:
Moritz Lehmann,
Mathias J. Krause,
Giorgio Amati,
Marcello Sega,
Jens Harting,
Stephan Gekle
Abstract:
Fluid dynamics simulations with the lattice Boltzmann method (LBM) are very memory-intensive. Alongside reduction in memory footprint, significant performance benefits can be achieved by using FP32 (single) precision compared to FP64 (double) precision, especially on GPUs. Here, we evaluate the possibility to use even FP16 and Posit16 (half) precision for storing fluid populations, while still car…
▽ More
Fluid dynamics simulations with the lattice Boltzmann method (LBM) are very memory-intensive. Alongside reduction in memory footprint, significant performance benefits can be achieved by using FP32 (single) precision compared to FP64 (double) precision, especially on GPUs. Here, we evaluate the possibility to use even FP16 and Posit16 (half) precision for storing fluid populations, while still carrying arithmetic operations in FP32. For this, we first show that the commonly occurring number range in the LBM is a lot smaller than the FP16 number range. Based on this observation, we develop novel 16-bit formats - based on a modified IEEE-754 and on a modified Posit standard - that are specifically tailored to the needs of the LBM. We then carry out an in-depth characterization of LBM accuracy for six different test systems with increasing complexity: Poiseuille flow, Taylor-Green vortices, Karman vortex streets, lid-driven cavity, a microcapsule in shear flow (utilizing the immersed-boundary method) and finally the impact of a raindrop (based on a Volume-of-Fluid approach). We find that the difference in accuracy between FP64 and FP32 is negligible in almost all cases, and that for a large number of cases even 16-bit is sufficient. Finally, we provide a detailed performance analysis of all precision levels on a large number of hardware microarchitectures and show that significant speedup is achieved with mixed FP32/16-bit.
△ Less
Submitted 31 January, 2022; v1 submitted 16 December, 2021;
originally announced December 2021.
-
Impact of Local Pressure Enhancements on Dust Concentration inTurbulent Protoplanetary Discs
Authors:
Marius Lehmann,
Min-Kai Lin
Abstract:
We investigate the evolution of dust and gas in the vicinity of local pressure enhancements (pressure bumps) in a protoplanetary disc (PPD) with turbulence due to the Vertical Shear Instability (VSI). We perform global 2D axisymmetric and 3D simulations of dust and gas for a range of values for Z (ratio of dust-to-gas (d/g) surface mass densities or metallicity), particle Stokes numbers tau, and p…
▽ More
We investigate the evolution of dust and gas in the vicinity of local pressure enhancements (pressure bumps) in a protoplanetary disc (PPD) with turbulence due to the Vertical Shear Instability (VSI). We perform global 2D axisymmetric and 3D simulations of dust and gas for a range of values for Z (ratio of dust-to-gas (d/g) surface mass densities or metallicity), particle Stokes numbers tau, and pressure bump amplitude A. Dust feedback onto the gas is included. For the first time we demonstrate in global 3D simulations the collection of dust in long-lived vortices induced by the VSI. Without a pressure bump and for Z~0.01 and tau~0.01 we find that such vortices reach d/g density ratios slightly below unity in the discs mid-plane, while for Z>0.05 long-lived vortices are largely absent. In presence of a pressure bump, for Z~0.01 & tau~0.01 a dusty vortex forms reaching d/g ratios of a few times unity, such that the SI is expected to develop, before it eventually shears out into a turbulent dust ring. For Z~0.03 this occurs for tau~0.005, with a weaker, more short-lived vortex, while for larger tau only a turbulent dust ring forms. For Z>0.03 we find that the dust ring becomes increasingly axisymmetric for increasing tau and d/g ratios reach ~1 for tau>0.005. Furthermore, the disc's vertical mass flow profile is strongly affected by dust for Z>0.03, such that gas is transported inward near the mid-plane and outward at larger heights, i.e. the reversed situation compared to simulations with zero or small amounts of dust. Viscous $α$-values drop moderately as 0.001-0.0001 for increasing Z=0-0.05. Our results suggest that the VSI can play an active role in planetesimal formation through the formation of vortices for plausible values of Z and tau. Also it may provide a natural explanation for the presence/absence of asymmetries of observed dust rings in PPDs, depending on the value of Z.
△ Less
Submitted 12 December, 2021;
originally announced December 2021.
-
Sharp bounds on fake weighted projective spaces with canonical singularities
Authors:
Gennadiy Averkov,
Alexander Kasprzyk,
Martin Lehmann,
Benjamin Nill
Abstract:
We give a sharp upper bound on the multiplicity of a fake weighted projective space with at worst canonical singularities. This is equivalent to giving a sharp upper bound on the index of the sublattice generated by the vertices of a lattice simplex containing only the origin as an interior lattice point. We also completely characterise when equality occurs and discuss related questions and conjec…
▽ More
We give a sharp upper bound on the multiplicity of a fake weighted projective space with at worst canonical singularities. This is equivalent to giving a sharp upper bound on the index of the sublattice generated by the vertices of a lattice simplex containing only the origin as an interior lattice point. We also completely characterise when equality occurs and discuss related questions and conjectures.
△ Less
Submitted 20 May, 2021;
originally announced May 2021.
-
Beamforming for measurements under disturbed propagation conditions using numerically calculated Green's functions
Authors:
Marius Lehmann,
Daniel Ernst,
Marc Schneider,
Carsten Spehr,
Markus Lummer
Abstract:
Beamforming methods for sound source localization are usually based on free-field Green's functions to model the sound propagation between source and microphone. This assumption is known to be incorrect for many industrial applications and the beamforming results can suffer from this inconsistency regarding both, accuracy of source power estimation, and accuracy of source localisation. The aim of…
▽ More
Beamforming methods for sound source localization are usually based on free-field Green's functions to model the sound propagation between source and microphone. This assumption is known to be incorrect for many industrial applications and the beamforming results can suffer from this inconsistency regarding both, accuracy of source power estimation, and accuracy of source localisation. The aim of this paper is to investigate whether the use of numerically calculated Green's functions can improve the results of beamforming measurements.
The current test cases of numerical and experimental investigations consists of sources placed in a short rectangular duct. The measurement is performed outside the duct in a semi-anechoic chamber. A typical example for this kind of installation is a fan with a heat exchanger.
The Green's functions for this test case are calculated numerically using the boundary element method. These tailored Green's functions are used to calculate the corresponding beamforming steering vectors. The weighting of the Green's functions in the steering vectors has a decisive influence on the beamforming results. A generalization of the common steering vector formulations is given based on two scalars. It is shown that arbitrary differentiable Green's functions can be used to find the correct source position or source power level by using the appropriate steering vector formulations.
Beamforming measurements are performed using a loudspeaker as a reference source at different positions in the heat exchanger duct. The measurements are evaluated in the frequency domain and by means of different validation criteria it can be shown that the results with the numerical calculated Green's function are improved compared to free field beamforming especially at low frequencies.
△ Less
Submitted 30 October, 2020;
originally announced October 2020.
-
Commissioning of the novel Continuous Angle Multi-Energy Analysis Spectrometer at the Paul Scherrer Institut
Authors:
Jakob Lass,
Henrik Jacobsen,
Kristine M. L. Krighaar,
Dieter Graf,
Felix Groitl,
Frank Herzog,
Masako Yamada,
Christian Kägi,
Raphael Müller,
Roman Bürge,
Marcel Schild,
Manuel S. Lehmann,
Alex Bollhalder,
Peter Keller,
Marek Bartkowiak,
Uwe Filges,
Urs Greuter,
Gerd Theidel,
Henrik M. Rønnow,
Christof Niedermayer,
Daniel G. Mazzone
Abstract:
We report on the commissioning results of the cold neutron multiplexing secondary spectrometer CAMEA (\textbf{C}ontinuous \textbf{A}ngle \textbf{M}ulti-\textbf{E}nergy \textbf{A}nalysis) at the Swiss Spallation Neutron Source (SINQ) at the Paul Scherrer Institut, Switzerland. CAMEA is optimized for an efficient data acquisition of scattered neutrons in the horizontal scattering plane, allowing for…
▽ More
We report on the commissioning results of the cold neutron multiplexing secondary spectrometer CAMEA (\textbf{C}ontinuous \textbf{A}ngle \textbf{M}ulti-\textbf{E}nergy \textbf{A}nalysis) at the Swiss Spallation Neutron Source (SINQ) at the Paul Scherrer Institut, Switzerland. CAMEA is optimized for an efficient data acquisition of scattered neutrons in the horizontal scattering plane, allowing for detailed and rapid map** of low-energy excitations under extreme sample environment conditions.
△ Less
Submitted 13 March, 2023; v1 submitted 29 July, 2020;
originally announced July 2020.
-
Analytic Solution to the Piecewise Linear Interface Construction Problem and its Application in Curvature Calculation for Volume-of-Fluid Simulation Codes
Authors:
Moritz Lehmann,
Stephan Gekle
Abstract:
The plane-cube intersection problem has been around in literature since 1984 and iterative solutions to it have been used as part of piecewise linear interface construction (PLIC) in computational fluid dynamics simulation codes ever since. In many cases, PLIC is the bottleneck of these simulations regarding compute time, so a faster, analytic solution to the plane-cube intersection would greatly…
▽ More
The plane-cube intersection problem has been around in literature since 1984 and iterative solutions to it have been used as part of piecewise linear interface construction (PLIC) in computational fluid dynamics simulation codes ever since. In many cases, PLIC is the bottleneck of these simulations regarding compute time, so a faster, analytic solution to the plane-cube intersection would greatly reduce compute time for such simulations. We derive an analytic solution for all intersection cases and compare it to the one previous solution from Scardovelli and Zaleski (Ruben Scardovelli and Stephane Zaleski. "Analytical relations connecting linear interfaces and volume fractions in rectangular grids". In: Journal of Computational Physics 164.1 (2000), pp. 228-237.), which we further improve to include edge cases and micro-optimize to reduce arithmetic operations and branching. We then extend our comparison regarding compute time and accuracy to include two different iterative solutions as well. We find that the best choice depends on the employed hardware platform: on the CPU, Newton-Raphson is fastest with vectorization while analytic solutions perform better without. The reason for this is that vectorization instruction sets do not include trigonometric functions as used in the analytic solutions. On the GPU, the fastest method is our optimized version of the analytic SZ solution. We finally provide details on one of the applications of PLIC: curvature calculation for the Volume-of-Fluid model used for free surface fluid simulations in combination with the lattice Boltzmann method.
△ Less
Submitted 18 February, 2021; v1 submitted 23 June, 2020;
originally announced June 2020.
-
Analysis of hydrogen distribution and migration in fired passivating contacts (FPC)
Authors:
Mario Lehmann,
Nathalie Valle,
Jörg Horzel,
Alisa Pshenova,
Philippe Wyss,
Max Döbeli,
Matthieu Despeisse,
Santhana Eswara,
Tom Wirtz,
Quentin Jeangros,
Aïcha Hessler-Wyser,
Franz-Josef Haug,
Andrea Ingenito,
Christophe Ballif
Abstract:
In this work, the hydrogenation mechanism of fired passivating contacts (FPC) based on c-Si/SiO$_{x}$/nc-SiC$_{x}$(p) stacks was investigated, by correlating the passivation and local re-distribution of hydrogen. Secondary ion mass spectroscopy (SIMS) depth profiling was used to assess the hydrogen (/deuterium) content. The SIMS profiles show that hydrogen almost completely effuses out of the SiC…
▽ More
In this work, the hydrogenation mechanism of fired passivating contacts (FPC) based on c-Si/SiO$_{x}$/nc-SiC$_{x}$(p) stacks was investigated, by correlating the passivation and local re-distribution of hydrogen. Secondary ion mass spectroscopy (SIMS) depth profiling was used to assess the hydrogen (/deuterium) content. The SIMS profiles show that hydrogen almost completely effuses out of the SiC$_{x}$(p) during firing, but can be re-introduced by hydrogenation via forming gas anneal (FGA) or by release from a hydrogen containing layer such as SiN$_{x}$:H. A pile-up of H at the c-Si/SiO$_{x}$ interface was observed and identified as a key element in the FPC's passivation mechanism. Moreover, the samples hydrogenated with SiN$_{x}$:H exhibited higher H content compared to those treated by FGA, resulting in higher iV$_{OC}$ values. Further investigations revealed that the do** of the SiC$_{x}$ layer does not affect the amount of interfacial defects passivated by the hydrogenation process presented in this work. Eventually, an effect of the oxide's nature on passivation quality is evidenced. iV$_{OC}$ values of up to 706 mV and 720 mV were reached with FPC test structures using chemical and UV-O$_{3}$ tunneling oxides, respectively, and up to 739 mV using a reference passivation sample featuring a ~25 nm thick thermal oxide.
△ Less
Submitted 30 July, 2019;
originally announced July 2019.
-
Encoding Electromagnetic Transformation Laws for Dimensional Reduction
Authors:
Marcus Christian Lehmann,
Mirsad Hadžiefendić,
Albert Piwonski,
Rolf Schuhmann
Abstract:
Electromagnetic phenomena are mathematically described by solutions of boundary value problems. For exploiting symmetries of these boundary value problems in a way that is offered by techniques of dimensional reduction, it needs to be justified that the derivative in symmetry direction is constant or even vanishing. A generalized notion of symmetry can be defined with different directions at every…
▽ More
Electromagnetic phenomena are mathematically described by solutions of boundary value problems. For exploiting symmetries of these boundary value problems in a way that is offered by techniques of dimensional reduction, it needs to be justified that the derivative in symmetry direction is constant or even vanishing. A generalized notion of symmetry can be defined with different directions at every point in space, as long as it is possible to exhibit unidirectional symmetry in some coordinate representation. This can be achieved, e.g., when the symmetry direction is given by the direct construction out of a unidirectional symmetry via a coordinate transformation which poses a demand on the boundary value problem. Coordinate independent formulations of boundary value problems do exist but turning that theory into practice demands a pedantic process of backtranslation to the computational notions. This becomes even more challenging when multiple chained transformations are necessary for propagating a symmetry. We try to fill this gap and present the more general, isolated problems of that translation.
Within this contribution, the partial derivative and the corresponding chain rule for multivariate calculus are investigated with respect to their encodability in computational terms. We target the layer above univariate calculus, but below tensor calculus.
△ Less
Submitted 16 April, 2020; v1 submitted 12 November, 2018;
originally announced November 2018.
-
Resolution and accuracy of non-linear regression of PSF with artificial neural networks
Authors:
Matthias Lehmann,
Christian Wittpahl,
Hatem Ben Zakour,
Alexander Braun
Abstract:
In a previous work we have demonstrated a novel numerical model for the point spread function (PSF) of an optical system that can efficiently model both experimental measurements and lens design simulations of the PSF. The novelty lies in the portability and the parameterization of this model, which allows for completely new ways to validate optical systems, which is especially interesting for mas…
▽ More
In a previous work we have demonstrated a novel numerical model for the point spread function (PSF) of an optical system that can efficiently model both experimental measurements and lens design simulations of the PSF. The novelty lies in the portability and the parameterization of this model, which allows for completely new ways to validate optical systems, which is especially interesting for mass production optics like in the automotive industry, but also for ophtalmology. The numerical basis for this model is a non-linear regression of the PSF with an artificial neural network (ANN). In this work we examine two important aspects of this model: the spatial resolution and the accuracy of the model. Measurement and simulation of a PSF can have a much higher resolution then the typical pixel size used in current camera sensors, especially those for the automotive industry. We discuss the influence this has on on the topology of the ANN and the final application where the modeled PSF is actually used. Another important influence on the accuracy of the trained ANN is the error metric which is used during training. The PSF is a distinctly non-linear function, which varies strongly over field and defocus, but nonetheless exhibits strong symmetries and spatial relations. Therefore we examine different distance and similarity measures and discuss its influence on the modeling performance of the ANN.
△ Less
Submitted 21 June, 2018;
originally announced June 2018.
-
Density Waves and the Viscous Overstability in Saturn's Rings
Authors:
Marius Lehmann,
Juergen Schmidt,
Heikki Salo
Abstract:
This paper addresses resonantly forced spiral density waves in a dense planetary ring which is close to the threshold for viscous overstability. We solve numerically the hydrodynamical equations for a dense, axisymmetric thin disk in the vicinity of an inner Lindblad resonance with a perturbing satellite. The spiral shape of a density wave is taken into account through a suitable approximation of…
▽ More
This paper addresses resonantly forced spiral density waves in a dense planetary ring which is close to the threshold for viscous overstability. We solve numerically the hydrodynamical equations for a dense, axisymmetric thin disk in the vicinity of an inner Lindblad resonance with a perturbing satellite. The spiral shape of a density wave is taken into account through a suitable approximation of the advective terms arising from the fluid orbital motion. This paper is a first attempt to model the co-existence of resonantly forced density waves and short-scale axisymmetric overstable wavetrains in Saturn's rings by conducting large-scale hydrodynamical integrations. These integrations reveal that the two wave types undergo complex interactions, not taken into account in existing models for the dam** of density waves. In particular it is found that, depending on the relative magnitude of both wave types, the presence of viscous overstability can lead to a dam** of an unstable density wave and vice versa. The dam** of viscous overstability by a density wave is investigated further by employing a simplified model of an axisymmetric ring perturbed by a nearby Lindblad resonance. A linear hydrodynamic stability analysis as well as local N-body simulations of this model system are performed and support the results of our large-scale hydrodynamical integrations.
△ Less
Submitted 18 October, 2018; v1 submitted 4 June, 2018;
originally announced June 2018.
-
Viscous Overstability in Saturn's Rings: Influence of Collective Self-gravity
Authors:
Marius Lehmann,
Juergen Schmidt,
Heikki Salo
Abstract:
We investigate the influence of collective self-gravity forces on the nonlinear, large-scale evolution of the viscous overstability in Saturn's rings. We numerically solve the axisymmetric hydrodynamic equations in the isothermal and non-isothermal approximation, including radial self-gravity and employing transport coefficients derived by Salo et al. We assume optical depths of 1.5-2 to model Sat…
▽ More
We investigate the influence of collective self-gravity forces on the nonlinear, large-scale evolution of the viscous overstability in Saturn's rings. We numerically solve the axisymmetric hydrodynamic equations in the isothermal and non-isothermal approximation, including radial self-gravity and employing transport coefficients derived by Salo et al. We assume optical depths of 1.5-2 to model Saturn's dense rings. Furthermore, local N-body simulations, incorporating vertical and radial collective self-gravity are performed. Vertical self-gravity is mimicked through an increased frequency of vertical oscillations, while radial self-gravity is approximated by solving the Poisson equation for an axisymmetric thin disk with a Fourier method. Direct particle-particle forces are omitted, which prevents small-scale gravitational instabilities (self-gravity wakes) from forming, an approximation that allows us to study long radial scales and to compare directly the hydrodynamic model and the N-body simulations. Our isothermal and non-isothermal hydrodynamic model results with vanishing self-gravity compare very well with results of Latter & Ogilvie and Rein & Latter, respectively. In contrast, for rings with radial self-gravity we find that the wavelengths of saturated overstable waves settle close to the frequency minimum of the nonlinear dispersion relation, i.e. close to a state of vanishing group velocities of the waves. Good agreement is found between non-isothermal hydrodynamics and N-body simulations for moderate and strong radial self-gravity, while the largest deviations occur for weak self-gravity. The resulting saturation wavelengths of viscous overstability for moderate and strong self-gravity (100-300m) agree reasonably well with the length scales of axisymmetric periodic micro-structure in Saturn's inner A-ring and the B-ring, as found by Cassini.
△ Less
Submitted 21 April, 2018;
originally announced April 2018.
-
A Weakly Nonlinear Model for the Dam** of Resonantly Forced Density Waves in Dense Planetary Rings
Authors:
Marius Lehmann,
Juergen Schmidt,
Heikki Salo
Abstract:
In this paper we address the stability of resonantly forced density waves in dense planetary rings.
Already by Goldreich & Tremaine (1978) it has been argued that density waves might be unstable, depending on the relationship between the ring's viscosity and the surface mass density.
In the recent paper Schmidt et al. (2016) we have pointed out that when - within a fluid description of the rin…
▽ More
In this paper we address the stability of resonantly forced density waves in dense planetary rings.
Already by Goldreich & Tremaine (1978) it has been argued that density waves might be unstable, depending on the relationship between the ring's viscosity and the surface mass density.
In the recent paper Schmidt et al. (2016) we have pointed out that when - within a fluid description of the ring dynamics - the criterion for viscous overstability is satisfied, forced spiral density waves become unstable as well.
In this case, linear theory fails to describe the dam**, but nonlinearity of the underlying equations guarantees a finite amplitude and eventually a dam** of the wave.
We apply the multiple scale formalism to derive a weakly nonlinear dam** relation from a hydrodynamical model.
This relation describes the resonant excitation and nonlinear viscous dam** of spiral density waves in a vertically integrated fluid disk with density dependent transport coefficients.
The model consistently predicts density waves to be (linearly) unstable in a ring region where the conditions for viscous overstability are met.
Sufficiently far away from the Lindblad resonance, the surface mass density perturbation is predicted to saturate to a constant value due to nonlinear viscous dam**.
The wave's dam** lengths of the model depend on certain input parameters, such as the distance to the threshold for viscous overstability in parameter space and the ground state surface mass density.
△ Less
Submitted 20 April, 2018;
originally announced April 2018.
-
Eligibility Traces and Plasticity on Behavioral Time Scales: Experimental Support of neoHebbian Three-Factor Learning Rules
Authors:
Wulfram Gerstner,
Marco Lehmann,
Vasiliki Liakoni,
Dane Corneil,
Johanni Brea
Abstract:
Most elementary behaviors such as moving the arm to grasp an object or walking into the next room to explore a museum evolve on the time scale of seconds; in contrast, neuronal action potentials occur on the time scale of a few milliseconds. Learning rules of the brain must therefore bridge the gap between these two different time scales.
Modern theories of synaptic plasticity have postulated th…
▽ More
Most elementary behaviors such as moving the arm to grasp an object or walking into the next room to explore a museum evolve on the time scale of seconds; in contrast, neuronal action potentials occur on the time scale of a few milliseconds. Learning rules of the brain must therefore bridge the gap between these two different time scales.
Modern theories of synaptic plasticity have postulated that the co-activation of pre- and postsynaptic neurons sets a flag at the synapse, called an eligibility trace, that leads to a weight change only if an additional factor is present while the flag is set. This third factor, signaling reward, punishment, surprise, or novelty, could be implemented by the phasic activity of neuromodulators or specific neuronal inputs signaling special events. While the theoretical framework has been developed over the last decades, experimental evidence in support of eligibility traces on the time scale of seconds has been collected only during the last few years.
Here we review, in the context of three-factor rules of synaptic plasticity, four key experiments that support the role of synaptic eligibility traces in combination with a third factor as a biological implementation of neoHebbian three-factor learning rules.
△ Less
Submitted 16 January, 2018;
originally announced January 2018.
-
Realistic Image Degradation with Measured PSF
Authors:
Christian Wittpahl,
Hatem Ben Zakour,
Matthias Lehmann,
Alexander Braun
Abstract:
Training autonomous vehicles requires lots of driving sequences in all situations\cite{zhao2016}. Typically a simulation environment (software-in-the-loop, SiL) accompanies real-world test drives to systematically vary environmental parameters. A missing piece in the optical model of those SiL simulations is the sharpness, given in linear system theory by the point-spread function (PSF) of the opt…
▽ More
Training autonomous vehicles requires lots of driving sequences in all situations\cite{zhao2016}. Typically a simulation environment (software-in-the-loop, SiL) accompanies real-world test drives to systematically vary environmental parameters. A missing piece in the optical model of those SiL simulations is the sharpness, given in linear system theory by the point-spread function (PSF) of the optical system. We present a novel numerical model for the PSF of an optical system that can efficiently model both experimental measurements and lens design simulations of the PSF. The numerical basis for this model is a non-linear regression of the PSF with an artificial neural network (ANN). The novelty lies in the portability and the parameterization of this model, which allows to apply this model in basically any conceivable optical simulation scenario, e.g. inserting a measured lens into a computer game to train autonomous vehicles. We present a lens measurement series, yielding a numerical function for the PSF that depends only on the parameters defocus, field and azimuth. By convolving existing images and videos with this PSF model we apply the measured lens as a transfer function, therefore generating an image as if it were seen with the measured lens itself. Applications of this method are in any optical scenario, but we focus on the context of autonomous driving, where quality of the detection algorithms depends directly on the optical quality of the used camera system. With the parameterization of the optical model we present a method to validate the functional and safety limits of camera-based ADAS based on the real, measured lens actually used in the product.
△ Less
Submitted 7 January, 2018;
originally announced January 2018.
-
One-shot learning and behavioral eligibility traces in sequential decision making
Authors:
Marco Lehmann,
He Xu,
Vasiliki Liakoni,
Michael Herzog,
Wulfram Gerstner,
Kerstin Preuschoff
Abstract:
In many daily tasks we make multiple decisions before reaching a goal. In order to learn such sequences of decisions, a mechanism to link earlier actions to later reward is necessary. Reinforcement learning theory suggests two classes of algorithms solving this credit assignment problem: In classic temporal-difference learning, earlier actions receive reward information only after multiple repetit…
▽ More
In many daily tasks we make multiple decisions before reaching a goal. In order to learn such sequences of decisions, a mechanism to link earlier actions to later reward is necessary. Reinforcement learning theory suggests two classes of algorithms solving this credit assignment problem: In classic temporal-difference learning, earlier actions receive reward information only after multiple repetitions of the task, whereas models with eligibility traces reinforce entire sequences of actions from a single experience (one-shot). Here we asked whether humans use eligibility traces. We developed a novel paradigm to directly observe which actions and states along a multi-step sequence are reinforced after a single reward. By focusing our analysis on those states for which RL with and without eligibility trace make qualitatively distinct predictions, we find direct behavioral (choice probability) and physiological (pupil dilation) signatures of reinforcement learning with eligibility trace across multiple sensory modalities.
△ Less
Submitted 12 November, 2019; v1 submitted 13 July, 2017;
originally announced July 2017.
-
Micro-engineered CH$_3$NH$_3$PbI$_3$ nanowire/graphene phototransistor for low intensity light detection at room temperature
Authors:
M. Spina,
M. Lehmann,
B. Náfrádi,
L. Bernard,
E. Bonvin,
R. Gaál,
A. Magrez,
L. Forró,
E. Horváth
Abstract:
Methylammonium lead iodide perovskite has revolutionized the field of third generation solid-state solar cells leading to simple solar cell structures1 and certified efficiencies up to 20.1%. Recently the peculiar light harvesting properties of organometal halide perovskites have been exploited in photodetectors where responsivities of ~3.5 A/W and 180 A/W have been respectively achieved for pure…
▽ More
Methylammonium lead iodide perovskite has revolutionized the field of third generation solid-state solar cells leading to simple solar cell structures1 and certified efficiencies up to 20.1%. Recently the peculiar light harvesting properties of organometal halide perovskites have been exploited in photodetectors where responsivities of ~3.5 A/W and 180 A/W have been respectively achieved for pure perovskite-based devices and hybrid nanostructures. Here, we report on the first hybrid phototransistors where the performance of a network of photoactive Methylammonium Lead Iodide nanowires (hereafter MAPbI$_3$NW) are enhanced by CVD-grown monolayer graphene. These devices show responsivities as high as ~2.6x10$^6$ A/W in the visible range showing potential as room-temperature single-electron detector.
△ Less
Submitted 3 December, 2016;
originally announced December 2016.
-
Current-induced conductance switching in epitaxial La0.7Sr0.3MnO3/SrTiO3 multilayers
Authors:
K. Doerr,
K. -H. Mueller,
T. Walter,
M. Sahana,
D. Eckert,
K. Nenkov,
L. Schultz,
K. Brand,
M. Lehmann
Abstract:
We report on the non-linear in-plane electrical transport in coherently grown [La0.7Sr0.3MnO3/SrTiO3] multilayers with ultrathin (< 3 nm) single layers. Current-induced switching of the conductance, with low conductance at larger currents, is demonstrated. The conductance switching is modified under a magnetic field, resulting in an extremely large magnetoresistance of negative, or in a special…
▽ More
We report on the non-linear in-plane electrical transport in coherently grown [La0.7Sr0.3MnO3/SrTiO3] multilayers with ultrathin (< 3 nm) single layers. Current-induced switching of the conductance, with low conductance at larger currents, is demonstrated. The conductance switching is modified under a magnetic field, resulting in an extremely large magnetoresistance of negative, or in a special case even positive, sign. Our results suggest a percolative nature of transport where a large local current density gives rise to a spin-polarizing and a thermal effect of current.
△ Less
Submitted 29 December, 2000;
originally announced December 2000.
