-
Search for Neutrino Emission from GRB 221009A using the KM3NeT ARCA and ORCA detectors
Authors:
S. Aiello,
A. Albert,
M. Alshamsi,
S. Alves Garre,
A. Ambrosone,
F. Ameli,
M. Andre,
E. Androutsou,
M. Anguita,
L. Aphecetche,
M. Ardid,
S. Ardid,
H. Atmani,
J. Aublin,
F. Badaracco,
L. Bailly-Salins,
Z. Bardačová,
B. Baret,
A. Bariego-Quintana,
S. Basegmez du Pree,
Y. Becherini,
M. Bendahman,
F. Benfenati,
M. Benhassi,
D. M. Benoit
, et al. (251 additional authors not shown)
Abstract:
Gamma-ray bursts are promising candidate sources of high-energy astrophysical neutrinos. The recent GRB 221009A event, identified as the brightest gamma-ray burst ever detected, provides a unique opportunity to investigate hadronic emissions involving neutrinos. The KM3NeT undersea neutrino detectors participated in the worldwide follow-up effort triggered by the event, searching for neutrino even…
▽ More
Gamma-ray bursts are promising candidate sources of high-energy astrophysical neutrinos. The recent GRB 221009A event, identified as the brightest gamma-ray burst ever detected, provides a unique opportunity to investigate hadronic emissions involving neutrinos. The KM3NeT undersea neutrino detectors participated in the worldwide follow-up effort triggered by the event, searching for neutrino events. In this letter, we summarize subsequent searches, in a wide energy range from MeV up to a few PeVs. No neutrino events are found in any of the searches performed. Upper limits on the neutrino emission associated with GRB 221009A are computed.
△ Less
Submitted 30 April, 2024; v1 submitted 8 April, 2024;
originally announced April 2024.
-
Astronomy potential of KM3NeT/ARCA
Authors:
S. Aiello,
A. Albert,
M. Alshamsi,
S. Alves Garre,
Z. Aly,
A. Ambrosone,
F. Ameli,
M. Andre,
E. Androutsou,
M. Anguita,
L. Aphecetche,
M. Ardid,
S. Ardid,
H. Atmani,
J. Aublin,
F. Badaracco,
L. Bailly-Salins,
Z. Bardacová,
B. Baret,
A. Bariego-Quintana,
A. Baruzzi,
S. Basegmez du Pree,
Y. Becherini,
M. Bendahman,
F. Benfenati
, et al. (253 additional authors not shown)
Abstract:
The KM3NeT/ARCA neutrino detector is currently under construction at 3500 m depth offshore Capo Passero, Sicily, in the Mediterranean Sea. The main science objectives are the detection of high-energy cosmic neutrinos and the discovery of their sources. Simulations were conducted for the full KM3NeT/ARCA detector, instrumenting a volume of 1 km$^3$, to estimate the sensitivity and discovery potenti…
▽ More
The KM3NeT/ARCA neutrino detector is currently under construction at 3500 m depth offshore Capo Passero, Sicily, in the Mediterranean Sea. The main science objectives are the detection of high-energy cosmic neutrinos and the discovery of their sources. Simulations were conducted for the full KM3NeT/ARCA detector, instrumenting a volume of 1 km$^3$, to estimate the sensitivity and discovery potential to point-like neutrino sources and an all-sky diffuse neutrino flux. This paper covers the reconstruction of track- and shower-like signatures, as well as the criteria employed for neutrino event selection. By leveraging both the track and shower observation channels, the KM3NeT/ARCA detector demonstrates the capability to detect the diffuse astrophysical neutrino flux within half a year of operation, achieving a 5$σ$ statistical significance. With an angular resolution below 0.1$^\circ$ for tracks and under 2$^\circ$ for showers, the sensitivity to point-like neutrino sources surpasses existing observed limits across the entire sky.
△ Less
Submitted 29 March, 2024; v1 submitted 13 February, 2024;
originally announced February 2024.
-
The Power Board of the KM3NeT Digital Optical Module: design, upgrade, and production
Authors:
S. Aiello,
A. Albert,
S. Alves Garre,
Z. Aly,
A. Ambrosone,
F. Ameli,
M. Andre,
E. Androutsou,
M. Anguita,
L. Aphecetche,
M. Ardid,
S. Ardid,
H. Atmani,
J. Aublin,
F. Badaracco,
L. Bailly-Salins,
Z. Bardacova,
B. Baret,
A. Bariego Quintana,
S. Basegmez du Pree,
Y. Becherini,
M. Bendahman,
F. Benfenati,
M. Benhassi,
D. M. Benoit
, et al. (259 additional authors not shown)
Abstract:
The KM3NeT Collaboration is building an underwater neutrino observatory at the bottom of the Mediterranean Sea consisting of two neutrino telescopes, both composed of a three-dimensional array of light detectors, known as digital optical modules. Each digital optical module contains a set of 31 three inch photomultiplier tubes distributed over the surface of a 0.44 m diameter pressure-resistant gl…
▽ More
The KM3NeT Collaboration is building an underwater neutrino observatory at the bottom of the Mediterranean Sea consisting of two neutrino telescopes, both composed of a three-dimensional array of light detectors, known as digital optical modules. Each digital optical module contains a set of 31 three inch photomultiplier tubes distributed over the surface of a 0.44 m diameter pressure-resistant glass sphere. The module includes also calibration instruments and electronics for power, readout and data acquisition. The power board was developed to supply power to all the elements of the digital optical module. The design of the power board began in 2013, and several prototypes were produced and tested. After an exhaustive validation process in various laboratories within the KM3NeT Collaboration, a mass production batch began, resulting in the construction of over 1200 power boards so far. These boards were integrated in the digital optical modules that have already been produced and deployed, 828 until October 2023. In 2017, an upgrade of the power board, to increase reliability and efficiency, was initiated. After the validation of a pre-production series, a production batch of 800 upgraded boards is currently underway. This paper describes the design, architecture, upgrade, validation, and production of the power board, including the reliability studies and tests conducted to ensure the safe operation at the bottom of the Mediterranean Sea throughout the observatory's lifespan
△ Less
Submitted 24 November, 2023;
originally announced November 2023.
-
Searches for neutrino counterparts of gravitational waves from the LIGO/Virgo third observing run with KM3NeT
Authors:
KM3NeT Collaboration,
S. Aiello,
A. Albert,
S. Alves Garre,
Z. Aly,
A. Ambrosone,
F. Ameli,
M. Andre,
E. Androutsou,
M. Anguita,
L. Aphecetche,
M. Ardid,
S. Ardid,
H. Atmani,
J. Aublin,
L. Bailly-Salins,
Z. Bardačová,
B. Baret,
A. Bariego-Quintana,
S. Basegmez du Pree,
Y. Becherini,
M. Bendahman,
F. Benfenati,
M. Benhassi,
D. M. Benoit
, et al. (251 additional authors not shown)
Abstract:
The KM3NeT neutrino telescope is currently being deployed at two different sites in the Mediterranean Sea. First searches for astrophysical neutrinos have been performed using data taken with the partial detector configuration already in operation. The paper presents the results of two independent searches for neutrinos from compact binary mergers detected during the third observing run of the LIG…
▽ More
The KM3NeT neutrino telescope is currently being deployed at two different sites in the Mediterranean Sea. First searches for astrophysical neutrinos have been performed using data taken with the partial detector configuration already in operation. The paper presents the results of two independent searches for neutrinos from compact binary mergers detected during the third observing run of the LIGO and Virgo gravitational wave interferometers. The first search looks for a global increase in the detector counting rates that could be associated with inverse beta decay events generated by MeV-scale electron anti-neutrinos. The second one focuses on upgoing track-like events mainly induced by muon (anti-)neutrinos in the GeV--TeV energy range. Both searches yield no significant excess for the sources in the gravitational wave catalogs. For each source, upper limits on the neutrino flux and on the total energy emitted in neutrinos in the respective energy ranges have been set. Stacking analyses of binary black hole mergers and neutron star-black hole mergers have also been performed to constrain the characteristic neutrino emission from these categories.
△ Less
Submitted 7 May, 2024; v1 submitted 7 November, 2023;
originally announced November 2023.
-
Prospects for combined analyses of hadronic emission from $γ$-ray sources in the Milky Way with CTA and KM3NeT
Authors:
T. Unbehaun,
L. Mohrmann,
S. Funk,
S. Aiello,
A. Albert,
S. Alves Garre,
Z. Aly,
A. Ambrosone,
F. Ameli,
M. Andre,
E. Androutsou,
M. Anghinolfi,
M. Anguita,
L. Aphecetche,
M. Ardid,
S. Ardid,
H. Atmani,
J. Aublin,
C. Bagatelas,
L. Bailly-Salins,
Z. Bardačová,
B. Baret,
S. Basegmez du Pree,
Y. Becherini,
M. Bendahman
, et al. (249 additional authors not shown)
Abstract:
The Cherenkov Telescope Array and the KM3NeT neutrino telescopes are major upcoming facilities in the fields of $γ$-ray and neutrino astronomy, respectively. Possible simultaneous production of $γ$ rays and neutrinos in astrophysical accelerators of cosmic-ray nuclei motivates a combination of their data. We assess the potential of a combined analysis of CTA and KM3NeT data to determine the contri…
▽ More
The Cherenkov Telescope Array and the KM3NeT neutrino telescopes are major upcoming facilities in the fields of $γ$-ray and neutrino astronomy, respectively. Possible simultaneous production of $γ$ rays and neutrinos in astrophysical accelerators of cosmic-ray nuclei motivates a combination of their data. We assess the potential of a combined analysis of CTA and KM3NeT data to determine the contribution of hadronic emission processes in known Galactic $γ$-ray emitters, comparing this result to the cases of two separate analyses. In doing so, we demonstrate the capability of Gammapy, an open-source software package for the analysis of $γ$-ray data, to also process data from neutrino telescopes. For a selection of prototypical $γ$-ray sources within our Galaxy, we obtain models for primary proton and electron spectra in the hadronic and leptonic emission scenario, respectively, by fitting published $γ$-ray spectra. Using these models and instrument response functions for both detectors, we employ the Gammapy package to generate pseudo data sets, where we assume 200 hours of CTA observations and 10 years of KM3NeT detector operation. We then apply a three-dimensional binned likelihood analysis to these data sets, separately for each instrument and jointly for both. We find that the largest benefit of the combined analysis lies in the possibility of a consistent modelling of the $γ$-ray and neutrino emission. Assuming a purely leptonic scenario as input, we obtain, for the most favourable source, an average expected 68% credible interval that constrains the contribution of hadronic processes to the observed $γ$-ray emission to below 15%.
△ Less
Submitted 2 February, 2024; v1 submitted 6 September, 2023;
originally announced September 2023.
-
Embedded Software of the KM3NeT Central Logic Board
Authors:
S. Aiello,
A. Albert,
S. Alves Garre,
Z. Aly,
A. Ambrosone,
F. Ameli,
M. Andre,
E. Androutsou,
M. Anghinolfi,
M. Anguita,
L. Aphecetche,
M. Ardid,
S. Ardid,
H. Atmani,
J. Aublin,
C. Bagatelas,
L. Bailly-Salins,
Z. Bardačová,
B. Baret,
S. Basegmez du Pree,
Y. Becherini,
M. Bendahman,
F. Benfenati,
M. Benhassi,
D. M. Benoit
, et al. (249 additional authors not shown)
Abstract:
The KM3NeT Collaboration is building and operating two deep sea neutrino telescopes at the bottom of the Mediterranean Sea. The telescopes consist of latices of photomultiplier tubes housed in pressure-resistant glass spheres, called digital optical modules and arranged in vertical detection units. The two main scientific goals are the determination of the neutrino mass ordering and the discovery…
▽ More
The KM3NeT Collaboration is building and operating two deep sea neutrino telescopes at the bottom of the Mediterranean Sea. The telescopes consist of latices of photomultiplier tubes housed in pressure-resistant glass spheres, called digital optical modules and arranged in vertical detection units. The two main scientific goals are the determination of the neutrino mass ordering and the discovery and observation of high-energy neutrino sources in the Universe. Neutrinos are detected via the Cherenkov light, which is induced by charged particles originated in neutrino interactions. The photomultiplier tubes convert the Cherenkov light into electrical signals that are acquired and timestamped by the acquisition electronics. Each optical module houses the acquisition electronics for collecting and timestam** the photomultiplier signals with one nanosecond accuracy. Once finished, the two telescopes will have installed more than six thousand optical acquisition nodes, completing one of the more complex networks in the world in terms of operation and synchronization. The embedded software running in the acquisition nodes has been designed to provide a framework that will operate with different hardware versions and functionalities. The hardware will not be accessible once in operation, which complicates the embedded software architecture. The embedded software provides a set of tools to facilitate remote manageability of the deployed hardware, including safe reconfiguration of the firmware. This paper presents the architecture and the techniques, methods and implementation of the embedded software running in the acquisition nodes of the KM3NeT neutrino telescopes.
△ Less
Submitted 12 October, 2023; v1 submitted 2 August, 2023;
originally announced August 2023.
-
Probing invisible neutrino decay with KM3NeT-ORCA
Authors:
KM3NeT Collaboration,
S. Aiello,
A. Albert,
S. Alves Garre,
Z. Aly,
A. Ambrosone,
F. Ameli,
M. Andre,
M. Anghinolfi,
M. Anguita,
M. Ardid,
S. Ardid,
J. Aublin,
C. Bagatelas,
L. Bailly-Salins,
B. Baret,
S. Basegmez du Pree,
Y. Becherini,
M. Bendahman,
F. Benfenati,
E. Berbee,
V. Bertin,
S. Biagi,
M. Boettcher,
M. Bou Cabo
, et al. (230 additional authors not shown)
Abstract:
In the era of precision measurements of the neutrino oscillation parameters, upcoming neutrino experiments will also be sensitive to physics beyond the Standard Model. KM3NeT/ORCA is a neutrino detector optimised for measuring atmospheric neutrinos from a few GeV to around 100 GeV. In this paper, the sensitivity of the KM3NeT/ORCA detector to neutrino decay has been explored. A three-flavour neutr…
▽ More
In the era of precision measurements of the neutrino oscillation parameters, upcoming neutrino experiments will also be sensitive to physics beyond the Standard Model. KM3NeT/ORCA is a neutrino detector optimised for measuring atmospheric neutrinos from a few GeV to around 100 GeV. In this paper, the sensitivity of the KM3NeT/ORCA detector to neutrino decay has been explored. A three-flavour neutrino oscillation scenario, where the third neutrino mass state $ν_3$ decays into an invisible state, e.g. a sterile neutrino, is considered. We find that KM3NeT/ORCA would be sensitive to invisible neutrino decays with $1/α_3=τ_3/m_3 < 180$~$\mathrm{ps/eV}$ at $90\%$ confidence level, assuming true normal ordering. Finally, the impact of neutrino decay on the precision of KM3NeT/ORCA measurements for $θ_{23}$, $Δm^2_{31}$ and mass ordering have been studied. No significant effect of neutrino decay on the sensitivity to these measurements has been found.
△ Less
Submitted 27 March, 2023; v1 submitted 6 February, 2023;
originally announced February 2023.
-
Nanobeacon: A time calibration device for the KM3NeT neutrino telescope
Authors:
S. Aiello,
A. Albert,
M. Alshamsi,
S. Alves Garre,
Z. Aly,
A. Ambrosone,
F. Ameli,
M. Andre,
G. Androulakis,
M. Anghinolfi,
M. Anguita,
M. Ardid,
S. Ardid,
J. Aublin,
C. Bagatelas,
B. Baret,
S. Basegmez du Pree,
M. Bendahman,
F. Benfenati,
E. Berbee,
A. M. van den Berg,
V. Bertine,
S. Biagi,
M. Boettcher,
M. Bou Cabo
, et al. (216 additional authors not shown)
Abstract:
The KM3NeT Collaboration is currently constructing a multi-site high-energy neutrino telescope in the Mediterranean Sea consisting of matrices of pressure-resistant glass spheres, each holding a set of 31 small-area photomultipliers. The main goals of the telescope are the observation of neutrino sources in the Universe and the measurement of the neutrino oscillation parameters with atmospheric ne…
▽ More
The KM3NeT Collaboration is currently constructing a multi-site high-energy neutrino telescope in the Mediterranean Sea consisting of matrices of pressure-resistant glass spheres, each holding a set of 31 small-area photomultipliers. The main goals of the telescope are the observation of neutrino sources in the Universe and the measurement of the neutrino oscillation parameters with atmospheric neutrinos. Both extraterrestrial and atmospheric neutrinos are detected through the Cherenkov light induced in seawater by charged particles produced in neutrino interactions in the surrounding medium. A relative time synchronization between photomultipliers of the order of 1 ns is needed to guarantee the required angular resolution of the detector. Due to the large detector volumes to be instrumented by KM3NeT, a cost reduction of the different systems is a priority. To this end, the inexpensive Nanobeacon has been designed and developed by the KM3NeT Collaboration to be used for detector time-calibration studies. At present, more than 600 Nanobeacons have been already produced. The characterization of the optical pulse and the wavelength emission profile of the devices are critical for the time calibration. In this paper, the main features of the Nanobeacon design, production and operation, together with the main properties of the light pulse generated are described.
△ Less
Submitted 30 October, 2021;
originally announced November 2021.
-
Implementation and first results of the KM3NeT real-time core-collapse supernova neutrino search
Authors:
KM3NeT Collaboration,
S. Aiello,
A. Albert,
M. Alshamsi,
S. Alves Garre,
Z. Aly,
A. Ambrosone,
F. Ameli,
M. Andre,
G. Androulakis,
M. Anghinolfi,
M. Anguita,
M. Ardid,
S. Ardid,
J. Aublin,
C. Bagatelas,
B. Baret,
S. Basegmez du Pree,
M. Bendahman,
F. Benfenati,
E. Berbee,
A. M. van den Berg,
V. Bertin,
S. Biagi,
M. Boettcher
, et al. (220 additional authors not shown)
Abstract:
The KM3NeT research infrastructure is under construction in the Mediterranean Sea. KM3NeT will study atmospheric and astrophysical neutrinos with two multi-purpose neutrino detectors, ARCA and ORCA, primarily aimed at GeV-PeV neutrinos. Thanks to the multi-photomultiplier tube design of the digital optical modules, KM3NeT is capable of detecting the neutrino burst from a Galactic or near-Galactic…
▽ More
The KM3NeT research infrastructure is under construction in the Mediterranean Sea. KM3NeT will study atmospheric and astrophysical neutrinos with two multi-purpose neutrino detectors, ARCA and ORCA, primarily aimed at GeV-PeV neutrinos. Thanks to the multi-photomultiplier tube design of the digital optical modules, KM3NeT is capable of detecting the neutrino burst from a Galactic or near-Galactic core-collapse supernova. This potential is already exploitable with the first detection units deployed in the sea. This paper describes the real-time implementation of the supernova neutrino search, operating on the two KM3NeT detectors since the first months of 2019. A quasi-online astronomy analysis is introduced to study the time profile of the detected neutrinos for especially significant events. The mechanism of generation and distribution of alerts, as well as the integration into the SNEWS and SNEWS 2.0 global alert systems are described. The approach for the follow-up of external alerts with a search for a neutrino excess in the archival data is defined. Finally, an overview of the current detector capabilities and a report after the first two years of operation are given.
△ Less
Submitted 7 December, 2021; v1 submitted 13 September, 2021;
originally announced September 2021.
-
Combined sensitivity of JUNO and KM3NeT/ORCA to the neutrino mass ordering
Authors:
KM3NeT Collaboration,
S. Aiello,
A. Albert,
M. Alshamsi,
S. Alves Garre,
Z. Aly,
A. Ambrosone,
F. Ameli,
M. Andre,
G. Androulakis,
M. Anghinolfi,
M. Anguita,
M. Ardid,
S. Ardid,
J. Aublin,
C. Bagatelas,
B. Baret,
S. Basegmez du Pree,
M. Bendahman,
F. Benfenati,
E. Berbee,
A. M. van den Berg,
V. Bertin,
S. Biagi,
M. Boettcher
, et al. (253 additional authors not shown)
Abstract:
This article presents the potential of a combined analysis of the JUNO and KM3NeT/ORCA experiments to determine the neutrino mass ordering. This combination is particularly interesting as it significantly boosts the potential of either detector, beyond simply adding their neutrino mass ordering sensitivities, by removing a degeneracy in the determination of $Δm_{31}^2$ between the two experiments…
▽ More
This article presents the potential of a combined analysis of the JUNO and KM3NeT/ORCA experiments to determine the neutrino mass ordering. This combination is particularly interesting as it significantly boosts the potential of either detector, beyond simply adding their neutrino mass ordering sensitivities, by removing a degeneracy in the determination of $Δm_{31}^2$ between the two experiments when assuming the wrong ordering. The study is based on the latest projected performances for JUNO, and on simulation tools using a full Monte Carlo approach to the KM3NeT/ORCA response with a careful assessment of its energy systematics. From this analysis, a $5σ$ determination of the neutrino mass ordering is expected after 6 years of joint data taking for any value of the oscillation parameters. This sensitivity would be achieved after only 2 years of joint data taking assuming the current global best-fit values for those parameters for normal ordering.
△ Less
Submitted 13 August, 2021;
originally announced August 2021.
-
SoLid: A short baseline reactor neutrino experiment
Authors:
SoLid Collaboration,
Y. Abreu,
Y. Amhis,
L. Arnold,
G. Barber,
W. Beaumont,
S. Binet,
I. Bolognino,
M. Bongrand,
J. Borg,
D. Boursette,
V. Buridon,
B. C. Castle,
H. Chanal,
K. Clark,
B. Coupe,
P. Crochet,
D. Cussans,
A. De Roeck,
D. Durand,
T. Durkin,
M. Fallot,
L. Ghys,
L. Giot,
K. Graves
, et al. (37 additional authors not shown)
Abstract:
The SoLid experiment, short for Search for Oscillations with a Lithium-6 detector, is a new generation neutrino experiment which tries to address the key challenges for high precision reactor neutrino measurements at very short distances from a reactor core and with little or no overburden. The primary goal of the SoLid experiment is to perform a precise measurement of the electron antineutrino en…
▽ More
The SoLid experiment, short for Search for Oscillations with a Lithium-6 detector, is a new generation neutrino experiment which tries to address the key challenges for high precision reactor neutrino measurements at very short distances from a reactor core and with little or no overburden. The primary goal of the SoLid experiment is to perform a precise measurement of the electron antineutrino energy spectrum and flux and to search for very short distance neutrino oscillations as a probe of eV-scale sterile neutrinos. This paper describes the SoLid detection principle, the mechanical design and the construction of the detector. It then reports on the installation and commissioning on site near the BR2 reactor, Belgium, and finally highlights its performance in terms of detector response and calibration.
△ Less
Submitted 15 December, 2020; v1 submitted 14 February, 2020;
originally announced February 2020.
-
Commissioning and Operation of the Readout System for the SoLid Neutrino Detector
Authors:
Y. Abreu,
Y. Amhis,
G. Ban,
W. Beaumont,
S. Binet,
M. Bongrand,
D. Boursette,
B. C. Castle,
H. Chanal,
K. Clark,
B. Coupé,
P. Crochet,
D. Cussans,
A. De Roeck,
D. Durand,
M. Fallot,
L. Ghys,
L. Giot,
K. Graves,
B. Guillon,
D. Henaff,
B. Hosseini,
S. Ihantola,
S. Jenzer,
S. Kalcheva
, et al. (31 additional authors not shown)
Abstract:
The SoLid experiment aims to measure neutrino oscillation at a baseline of 6.4 m from the BR2 nuclear reactor in Belgium. Anti-neutrinos interact via inverse beta decay (IBD), resulting in a positron and neutron signal that are correlated in time and space. The detector operates in a surface building, with modest shielding, and relies on extremely efficient online rejection of backgrounds in order…
▽ More
The SoLid experiment aims to measure neutrino oscillation at a baseline of 6.4 m from the BR2 nuclear reactor in Belgium. Anti-neutrinos interact via inverse beta decay (IBD), resulting in a positron and neutron signal that are correlated in time and space. The detector operates in a surface building, with modest shielding, and relies on extremely efficient online rejection of backgrounds in order to identify these interactions. A novel detector design has been developed using 12800 5 cm cubes for high segmentation. Each cube is formed of a sandwich of two scintillators, PVT and 6LiF:ZnS(Ag), allowing the detection and identification of positrons and neutrons respectively. The active volume of the detector is an array of cubes measuring 80x80x250 cm (corresponding to a fiducial mass of 1.6 T), which is read out in layers using two dimensional arrays of wavelength shifting fibres and silicon photomultipliers, for a total of 3200 readout channels. Signals are recorded with 14 bit resolution, and at 40 MHz sampling frequency, for a total raw data rate of over 2 Tbit/s. In this paper, we describe a novel readout and trigger system built for the experiment, that satisfies requirements on: compactness, low power, high performance, and very low cost per channel. The system uses a combination of high price-performance FPGAs with a gigabit Ethernet based readout system, and its total power consumption is under 1 kW. The use of zero suppression techniques, combined with pulse shape discrimination trigger algorithms to detect neutrons, results in an online data reduction factor of around 10000. The neutron trigger is combined with a large per-channel history time buffer, allowing for unbiased positron detection. The system was commissioned in late 2017, with successful physics data taking established in early 2018.
△ Less
Submitted 31 August, 2019; v1 submitted 13 December, 2018;
originally announced December 2018.
-
Development of a Quality Assurance Process for the SoLid Experiment
Authors:
Y. Abreu,
Y. Amhis,
G. Ban,
W. Beaumont,
S. Binet,
M. Bongrand,
D. Boursette,
B. C. Castle,
H. Chanal,
K. Clark,
B. Coupé,
P. Crochet,
D. Cussans,
A. De Roeck,
D. Durand,
M. Fallot,
L. Ghys,
L. Giot,
K. Graves,
B. Guillon,
D. Henaff,
B. Hosseini,
S. Ihantola,
S. Jenzer,
S. Kalcheva
, et al. (31 additional authors not shown)
Abstract:
The SoLid experiment has been designed to search for an oscillation pattern induced by a light sterile neutrino state, utilising the BR2 reactor of SCK$\bullet$CEN, in Belgium. The detector leverages a new hybrid technology, utilising two distinct scintillators in a cubic array, creating a highly segmented detector volume. A combination of 5 cm cubic polyvinyltoluene cells, with $^6$LiF:ZnS(Ag) sh…
▽ More
The SoLid experiment has been designed to search for an oscillation pattern induced by a light sterile neutrino state, utilising the BR2 reactor of SCK$\bullet$CEN, in Belgium. The detector leverages a new hybrid technology, utilising two distinct scintillators in a cubic array, creating a highly segmented detector volume. A combination of 5 cm cubic polyvinyltoluene cells, with $^6$LiF:ZnS(Ag) sheets on two faces of each cube, facilitate reconstruction of the neutrino signals. % The polyvinyltoluene scintillator is used as an $\overlineν_e$ target for the inverse beta decay of ($\overlineν_e + p \rightarrow e^{+}+n$), with the $^6$LiF:ZnS(Ag) sheets used for associated neutron detection. Scintillation signals are read out by a network of wavelength shifting fibres connected to multipixel photon counters. Whilst the high granularity provides a powerful toolset to discriminate backgrounds; by itself the segmentation also represents a challenge in terms of homogeneity and calibration, for a consistent detector response. The search for this light sterile neutrino implies a sensitivity to distortions of around $\mathcal{O}$(10)\% in the energy spectrum of reactor $\overlineν_e$. Hence, a very good neutron detection efficiency, light yield and homogeneous detector response are critical for data validation. The minimal requirements for the SoLid physics program are a light yield and a neutron detection efficiency larger than 40 PA/MeV/cube and 50 \% respectively. In order to guarantee these minimal requirements, the collaboration developed a rigorous quality assurance process for all 12800 cubic cells of the detector. To carry out the quality assurance process, an automated calibration system called CALIPSO was designed and constructed.
△ Less
Submitted 20 December, 2018; v1 submitted 13 November, 2018;
originally announced November 2018.
-
Optimisation of the scintillation light collection and uniformity for the SoLid experiment
Authors:
Y. Abreu,
Y. Amhis,
W. Beaumont,
M. Bongrand,
D. Boursette,
B. C. Castle,
K. Clark,
B. Coupé,
D. Cussans,
A. De Roeck,
D. Durand,
M. Fallot,
L. Ghys,
L. Giot,
K. Graves,
B. Guillon,
D. Henaff,
B. Hosseini,
S. Ihantola,
S. Jenzer,
S. Kalcheva,
L. N. Kalousis,
M. Labare,
G. Lehaut,
S. Manley
, et al. (26 additional authors not shown)
Abstract:
This paper presents a comprehensive optimisation study to maximise the light collection efficiency of scintillating cube elements used in the SoLid detector. Very short baseline reactor experiments, like SoLid, look for active to sterile neutrino oscillation signatures in the anti-neutrino energy spectrum as a function of the distance to the core and energy. Performing a precise search requires hi…
▽ More
This paper presents a comprehensive optimisation study to maximise the light collection efficiency of scintillating cube elements used in the SoLid detector. Very short baseline reactor experiments, like SoLid, look for active to sterile neutrino oscillation signatures in the anti-neutrino energy spectrum as a function of the distance to the core and energy. Performing a precise search requires high light yield of the scintillating elements and uniformity of the response in the detector volume. The SoLid experiment uses an innovative hybrid technology with two different scintillators: polyvinyltoluene scintillator cubes and $^6$LiF:ZnS(Ag) screens. A precision test bench based on a $^{207}$Bi calibration source has been developed to study improvements on the energy resolution and uniformity of the prompt scintillation signal of antineutrino interactions. A trigger system selecting the 1~MeV conversion electrons provides a Gaussian energy peak and allows for precise comparisons of the different detector configurations that were considered to improve the SoLid detector light collection. The light collection efficiency is influenced by the choice of wrap** material, the position of the $^6$LiF:ZnS(Ag) screen, the type of fibre, the number of optical fibres and the type of mirror at the end of the fibre. This study shows that large gains in light collection efficiency are possible compared to the SoLid SM1 prototype. The light yield for the SoLid detector is expected to be at least 52$\pm$2 photo-avalanches per MeV per cube, with a relative non-uniformity of 6 %, demonstrating that the required energy resolution of at least 14 % at 1 MeV can be achieved.
△ Less
Submitted 7 September, 2018; v1 submitted 6 June, 2018;
originally announced June 2018.
-
Study and validation of a new "3D Calorimetry" of hot nuclei with the HIPSE event generator
Authors:
E. Vient,
L. Manduci,
E. Legouée,
L. Augey,
E. Bonnet,
B. Borderie,
R. Bougault,
A. Chbihi,
D. Dell'Aquila,
Q. Fable,
L. Francalanza,
J. D. Frankland,
E. Galichet,
D. Gruyer,
D. Guinet,
M. Henri,
M. La Commara,
G. Lehaut,
N. Le Neindre,
I. Lombardo,
O. Lopez,
P. Marini,
M. Parlog,
M. F. Rivet,
E. Rosato
, et al. (5 additional authors not shown)
Abstract:
In nuclear thermodynamics, the determination of the excitation energy of hot nuclei is a fundamental experimental problem. Instrumental physicists have been trying to solve this problem for several years by building the most exhaustive 4Pi detector arrays and perfecting their calorimetry techniques. In a recent paper, a proposal for a new calorimetry, called "3D calorimetry", was made. It tries to…
▽ More
In nuclear thermodynamics, the determination of the excitation energy of hot nuclei is a fundamental experimental problem. Instrumental physicists have been trying to solve this problem for several years by building the most exhaustive 4Pi detector arrays and perfecting their calorimetry techniques. In a recent paper, a proposal for a new calorimetry, called "3D calorimetry", was made. It tries to optimize the separation between the particles and fragments emitted by the Quasi-Projectile and the other possible contributions. This can be achieved by determining the experimental probability for a given nucleus of a nuclear reaction to be emitted by the Quasi-Projectile. It has been developed for the INDRA data. In the present work, we wanted to dissect and validate this new method of characterization of a hot Quasi-Projectile. So we tried to understand and control it completely to determine these limits. Using the HIPSE event generator and a software simulating the functioning of INDRA, we were able to achieve this goal and provide a quantitative estimation of the quality of the QP characterization.
△ Less
Submitted 20 April, 2018;
originally announced April 2018.
-
Performance of a full scale prototype detector at the BR2 reactor for the SoLid experiment
Authors:
Y. Abreu,
Y. Amhis,
L. Arnold,
G. Ban,
W. Beaumont,
M. Bongrand,
D. Boursette,
B. C. Castle,
K. Clark,
B. Coupé,
D. Cussans,
A. De Roeck,
J. D'Hondt,
D. Durand,
M. Fallot,
L. Ghys,
L. Giot,
B. Guillon,
S. Ihantola,
X. Janssen,
S. Kalcheva,
L. N. Kalousis,
E. Koonen,
M. Labare,
G. Lehaut
, et al. (26 additional authors not shown)
Abstract:
The SoLid collaboration has developed a new detector technology to detect electron anti-neutrinos at close proximity to the Belgian BR2 reactor at surface level. A 288$\,$kg prototype detector was deployed in 2015 and collected data during the operational period of the reactor and during reactor shut-down. Dedicated calibration campaigns were also performed with gamma and neutron sources.
This p…
▽ More
The SoLid collaboration has developed a new detector technology to detect electron anti-neutrinos at close proximity to the Belgian BR2 reactor at surface level. A 288$\,$kg prototype detector was deployed in 2015 and collected data during the operational period of the reactor and during reactor shut-down. Dedicated calibration campaigns were also performed with gamma and neutron sources.
This paper describes the construction of the prototype detector with a high control on its proton content and the stability of its operation over a period of several months after deployment at the BR2 reactor site. All detector cells provide sufficient light yields to achieve a target energy resolution of better than 20%/$\sqrt{E(MeV)}$. The capability of the detector to track muons is exploited to equalize the light response of a large number of channels to a precision of 3% and to demonstrate the stability of the energy scale over time. Particle identification based on pulse-shape discrimination is demonstrated with calibration sources. Despite a lower neutron detection efficiency due to triggering constraints, the main backgrounds at the reactor site were determined and taken into account in the shielding strategy for the main experiment. The results obtained with this prototype proved essential in the design optimization of the final detector.
This paper is dedicated to our SCK$\cdot$CEN colleague, Edgar Koonen, who passed away unexpectedly in 2017. Edgar was part of the SoLid collaboration since its inception and his efforts were vital to get the experiment started. He will be duly missed.
△ Less
Submitted 12 April, 2018; v1 submitted 8 February, 2018;
originally announced February 2018.
-
A new "3D Calorimetry" of hot nuclei
Authors:
E. Vient,
L. Manduci,
E. Legouée,
L. Augey,
E. Bonnet,
B. Borderie,
R. Bougault,
A. Chbihi,
D. Dell'Aquila,
Q. Fable,
L. Francalanza,
J. D. Frankland,
E. Galichet,
D. Gruyer,
D. Guinet,
M. Henri,
M. La Commara,
G. Lehaut,
N. Le Neindre,
I. Lombardo,
O. Lopez,
P. Marini,
M. Parlog,
M. F. Rivet,
E. Rosato
, et al. (5 additional authors not shown)
Abstract:
In the domain of Fermi energy, it is extremely complex to isolate experimentally fragments and particles issued from the cooling of a hot nucleus produced during a heavy ion collision. This paper presents a new method to characterize more precisely hot Quasi-Projectiles. It tries to take into account as accurately as possible the distortions generated by all the other potential participants in the…
▽ More
In the domain of Fermi energy, it is extremely complex to isolate experimentally fragments and particles issued from the cooling of a hot nucleus produced during a heavy ion collision. This paper presents a new method to characterize more precisely hot Quasi-Projectiles. It tries to take into account as accurately as possible the distortions generated by all the other potential participants in the nuclear reaction. It is quantitatively shown that this method is a major improvement respect to classic calorimetries used with a 4$π$ detector array. By detailing and deconvolving the different steps of the reconstitution of the hot nucleus, this study shows also the respective role played by the experimental device and the event selection criteria on the quality of the determination of QP characteristics.
△ Less
Submitted 21 September, 2017;
originally announced September 2017.
-
Improving isotopic identification with \emph{INDRA} Silicon-CsI(\emph{Tl}) telescopes
Authors:
O. Lopez,
M. Parlog,
B. Borderie,
M. F. Rivet,
G. Lehaut,
G. Tabacaru,
L. Tassan-got,
P. Pawlowski,
E. Bonnet,
R. Bougault,
A. Chbihi,
D. Dell'Aquila,
J. D. Frankland,
E. Galichet,
D. Gruyer,
M. La Commara,
N. Le Neindre,
I. Lombardo,
L. Manduci,
P. Marini,
J. C. Steckmeyer,
G. Verde,
E. Vient,
J. P. Wieleczko
Abstract:
Profiting from previous works done with the \emph{INDRA} multidetector on the description of the light response $\mathcal L$ of the CsI(\emph{Tl}) crystals to different im**ing nuclei, we propose an improved $ΔE - \mathcal L$ identification-calibration procedure for Silicon-Cesium Iodide (Si-CsI) telescopes, namely an Advanced Mass Estimate (\emph{AME}) method. \emph{AME} is compared to the usua…
▽ More
Profiting from previous works done with the \emph{INDRA} multidetector on the description of the light response $\mathcal L$ of the CsI(\emph{Tl}) crystals to different im**ing nuclei, we propose an improved $ΔE - \mathcal L$ identification-calibration procedure for Silicon-Cesium Iodide (Si-CsI) telescopes, namely an Advanced Mass Estimate (\emph{AME}) method. \emph{AME} is compared to the usual, %$"ΔE - E"$ simple visual analysis of the corresponding two-dimensional map of $ΔE - E$ type, by using \emph{INDRA} experimental data from nuclear reactions induced by heavy ions in the Fermi energy regime. We show that the capability of such telescopes to identify both the atomic $Z$ and the mass $A$ numbers of light and heavy reaction products, can be quantitatively improved thanks to the proposed approach. This conclusion opens new possibilities to use \emph{INDRA} for studying these reactions especially with radioactive beams. Indeed, the determination of the mass for charged reaction products becomes of paramount importance to shed light on the role of the isospin degree of freedom in the nuclear equation of state.
△ Less
Submitted 27 July, 2017;
originally announced July 2017.
-
Understand the thermometry of hot nuclei from the energy spectra of light charged particles
Authors:
E. Vient,
L. Augey,
B. Borderie,
A. Chbihi,
D. Dell'Aquila,
Q. Fable,
L. Francalanza,
J. D. Frankland,
E. Galichet,
D. Gruyer,
D. Guinet,
M. Henri,
M. La Commara,
E. Legouée,
G. Lehaut,
N. Le Neindre,
I. Lombardo,
O. Lopez,
L. Manduci,
P. Marini,
M. Parlog,
M. F. Rivet,
E. Rosato,
R. Roy,
P. St-Onge
, et al. (3 additional authors not shown)
Abstract:
In the domain of Fermi energy, the hot nucleus temperature can be determined by using the energy spectra of evaporated light charged particles. But this method of measurement is not without difficulties both theoretical and experimental. The presented study aims to disentangle the respective influences of different factors on the quality of this measurement : the physics, the detection (a 4? detec…
▽ More
In the domain of Fermi energy, the hot nucleus temperature can be determined by using the energy spectra of evaporated light charged particles. But this method of measurement is not without difficulties both theoretical and experimental. The presented study aims to disentangle the respective influences of different factors on the quality of this measurement : the physics, the detection (a 4? detector array as INDRA) and the experimental procedure. This analysis demonstrates the possibility of determining from an energy spectrum, with an accuracy of about 10 %, the true apparent temperature felt by a given type of particle emitted by a hot nucleus. Three conditions are however necessary : have a perfect detector of particles, an important statistics and very few secondary emissions. According to the GEMINI event generator, for hot nuclei of intermediate mass, only deuterons and tritons could fill these conditions. This temperature can allow to trace back to the initial temperature by using an appropriate method. This determination may be better than 15 %. With a real experimental device, an insufficient angular resolution and topological distortions caused by the detection can damage spectra to the point to make very difficult a correct determination of the apparent temperature. The experimental reconstruction of the frame of the hot nucleus may also be responsible for this deterioration
△ Less
Submitted 5 July, 2017;
originally announced July 2017.
-
A novel segmented-scintillator antineutrino detector
Authors:
Y. Abreu,
Y. Amhis,
L. Arnold,
G. Ban,
W. Beaumont,
M. Bongrand,
D. Boursette,
J. M. Buhour,
B. C. Castle,
K. Clark,
B. Coupé,
A. S. Cucoanes,
D. Cussans,
A. De Roeck,
J. DHondt,
D. Durand,
M. Fallot,
S. Fresneau,
L. Ghys,
L. Giot,
B. Guillon,
G. Guilloux,
S. Ihantola,
X. Janssen,
S. Kalcheva
, et al. (31 additional authors not shown)
Abstract:
The next generation of very-short-baseline reactor experiments will require compact detectors operating at surface level and close to a nuclear reactor. This paper presents a new detector concept based on a composite solid scintillator technology. The detector target uses cubes of polyvinyltoluene interleaved with $^6$LiF:ZnS(Ag) phosphor screens to detect the products of the inverse beta decay re…
▽ More
The next generation of very-short-baseline reactor experiments will require compact detectors operating at surface level and close to a nuclear reactor. This paper presents a new detector concept based on a composite solid scintillator technology. The detector target uses cubes of polyvinyltoluene interleaved with $^6$LiF:ZnS(Ag) phosphor screens to detect the products of the inverse beta decay reaction. A multi-tonne detector system built from these individual cells can provide precise localisation of scintillation signals, making efficient use of the detector volume. Monte Carlo simulations indicate that a neutron capture efficiency of over 70% is achievable with a sufficient number of $^6$LiF:ZnS(Ag) screens per cube and that an appropriate segmentation enables a measurement of the positron energy which is not limited by gamma-ray leakage. First measurements of a single cell indicate that a very good neutron-gamma discrimination and high neutron detection efficiency can be obtained with adequate triggering techniques. The light yield from positron signals has been measured, showing that an energy resolution of 14%/$\sqrt{E({\mathrm{MeV}})}$ is achievable with high uniformity. A preliminary neutrino signal analysis has been developed, using selection criteria for pulse shape, energy, time structure and energy spatial distribution and showing that an antineutrino efficiency of 40% can be achieved. It also shows that the fine segmentation of the detector can be used to significantly decrease both correlated and accidental backgrounds.
△ Less
Submitted 31 May, 2017; v1 submitted 5 March, 2017;
originally announced March 2017.
-
In-medium effects for nuclear matter in the Fermi energy domain
Authors:
O. Lopez,
D. Durand,
G. Lehaut,
B. Borderie,
M. F. Rivet,
R. Bougault,
E. Galichet,
D. Guinet,
N. Le Neindre,
P. Marini,
P. Napolitani,
M. Pârlog,
E. Rosato,
G. Spadaccini,
E. Vient,
M. Vigilante
Abstract:
We study nuclear stop** in central collisions for heavy-ion induced reactions in the Fermi energy domain, between $15$ and $100$ A\,\textrm{MeV}. Using the large dataset of exclusive measurements provided by the $4π$ array \emph{INDRA}, we determine the relative degree of stop** as a function of system mass and bombarding energy. We show that the stop** can be directly related to the transpo…
▽ More
We study nuclear stop** in central collisions for heavy-ion induced reactions in the Fermi energy domain, between $15$ and $100$ A\,\textrm{MeV}. Using the large dataset of exclusive measurements provided by the $4π$ array \emph{INDRA}, we determine the relative degree of stop** as a function of system mass and bombarding energy. We show that the stop** can be directly related to the transport properties in the nuclear medium. By looking specifically at free nucleons (here protons), we present for the first time a comprehensive body of experimental results concerning the mean free path, the nucleon-nucleon cross-section and in-medium effects in nuclear matter. It is shown that the mean free path exhibits a maximum at $λ_{NN}=9.5 \pm 2$ \textrm{fm}, around $E_{inc}=35-40$ A\,\textrm{MeV} incident energy and decreases toward an asymptotic value $λ_{NN}= 4.5 \pm 1$ \textrm{fm} at $E_{inc} = 100$ A\,\textrm{MeV}. After accounting for Pauli blocking of elastic nucleon-nucleon collisions, it is shown that the effective in-medium \emph{NN} cross section is further reduced compared to the free value in this energy range. Therefore, in-medium effects cannot be neglected in the Fermi energy range. These results bring new fundamental inputs for microscopic descriptions of nuclear reactions in the Fermi energy domain.
△ Less
Submitted 2 September, 2014;
originally announced September 2014.
-
Isospin effects and symmetry energy studies with INDRA
Authors:
G. Ademard,
B. Borderie,
A. Chbihi,
O. Lopez,
P. Napolitani,
M. F. Rivet,
M. Boisjoli,
E. Bonnet,
R. Bougault,
J. D. Frankland,
E. Galichet,
D. Guinet,
M. Kabtoul,
G. Lehaut,
P. Lautesse,
M. La Commara,
N. Le Neindre,
P. Marini,
M. Pârlog,
P. Pawłowski,
E. Rosato,
R. Roy,
E. Spadaccini,
E. Vient,
M. Vigilante
, et al. (1 additional authors not shown)
Abstract:
The equation of state of asymmetric nuclear matter is still controversial, as predictions at subsaturation as well as above normal density widely diverge. We discuss several experimental results measured in heavy-ion collisions with the INDRA array in the incident energy range 5-80 MeV/nucleon. In particular an estimate of the density dependence of the symmetry energy is derived from isospin diffu…
▽ More
The equation of state of asymmetric nuclear matter is still controversial, as predictions at subsaturation as well as above normal density widely diverge. We discuss several experimental results measured in heavy-ion collisions with the INDRA array in the incident energy range 5-80 MeV/nucleon. In particular an estimate of the density dependence of the symmetry energy is derived from isospin diffusion results compared with a transport code: the potential part of the symmetry energy linearly increases with the density. We demonstrate that isospin equilibrium is reached in mid-central collisions for the two reactions Ni+Au at 52 MeV/nucleon and Xe+Sn at 32 MeV/nucleon. New possible variables and an improved modelization to investigate symmetry energy are discussed.
△ Less
Submitted 18 October, 2013;
originally announced October 2013.
-
Reactivity monitoring using the area method for the subcritic al VENUS-F core within the framework of the FREYA Project
Authors:
N. Marie,
G. Lehaut,
J. L. Lecouey,
A. Billebaud,
S. Chabod,
X. Doligez,
F. R. Lecolley,
A. Kochetkov,
W. Uyttenhove,
G. Vittiglio,
J. Wagemans,
F. Mellier,
G. Ban,
H. E. Thyébault,
D. Villamarin
Abstract:
Accelerator-Driven Systems (ADS) could be employed to incinerate minor actinides and so partly contribute to answer the problem of nuclear waste management. An ADS consists of the coupling of a subcritical fast reactor to a particle accelerator via a heavy material spallation target. The on-line reactivity monitoring of such an ADS is a serious issue regarding its safety. In order to study the met…
▽ More
Accelerator-Driven Systems (ADS) could be employed to incinerate minor actinides and so partly contribute to answer the problem of nuclear waste management. An ADS consists of the coupling of a subcritical fast reactor to a particle accelerator via a heavy material spallation target. The on-line reactivity monitoring of such an ADS is a serious issue regarding its safety. In order to study the methodology of this monitoring, zero-power experimentswere undertaken at the GUINEVERE facility within the framework of the FP6-IP-EUROTRANS programme. Such experiments have been under completion within the FREYA FP7 project. The GUINEVERE facility is hosted at the SCK-CEN site in Mol (Belgium). It couples the VENUS-F subcritical fast core with the GENEPI-3C accelerator. The latter delivers a beam of deuterons, which are converted into 14-MeV neutrons via fusion reactions on a tritiated target. This paper presents one of the investigated methods for ADS on-line reactivity monitoring which has to be validated in the program of the FREYA project. It describes the results obtained when Pulsed Neutron Source experiments are analysed using the so called Area Method, in order to estimate the reactivity of a few sub-critical configurations of the VENUS-F reactor, around keff= 0.96. First the GUINEVERE facility is described. Then, following general considerations on the Area method, the results of its application to the neutron population time decrease spectra measured after a pulse by several fission chambers spread out over the whole reactor are discussed. Finally the reactivity values extracted are compared to the static reactivity values obtained using the Modified Source Multiplication (MSM) method.
△ Less
Submitted 5 June, 2013;
originally announced June 2013.
-
Discovery of a new isomeric state in $^{68}$Ni: Evidence for a highly-deformed proton intruder state
Authors:
A. Dijon,
E. Clément,
G. De France,
G. De Angelis,
G. Duchêne,
J. Dudouet,
S. Franchoo,
A. Gadea,
A. Gottardo,
T. Hüyük,
B. Jacquot,
A. Kusoglu,
D. Lebhertz,
G. Lehaut,
M. Martini,
D. R. Napoli,
F. Nowacki,
S. Péru,
A. Poves,
F. Recchia,
N. Redon,
E. Sahin,
C. Schmitt,
M. Sferrazza,
K. Sieja
, et al. (4 additional authors not shown)
Abstract:
We report on the observation of a new isomeric state in $^{68}$Ni. We suggest that the newly observed state at 168(1) keV above the first 2$^+$ state is a $π(2p-2h)$ 0$^{+}$ state across the major Z=28 shell gap. Comparison with theoretical calculations indicates a pure proton intruder configuration and the deduced low-lying structure of this key nucleus suggests a possible shape coexistence scena…
▽ More
We report on the observation of a new isomeric state in $^{68}$Ni. We suggest that the newly observed state at 168(1) keV above the first 2$^+$ state is a $π(2p-2h)$ 0$^{+}$ state across the major Z=28 shell gap. Comparison with theoretical calculations indicates a pure proton intruder configuration and the deduced low-lying structure of this key nucleus suggests a possible shape coexistence scenario involving a highly deformed state.
△ Less
Submitted 28 February, 2012;
originally announced February 2012.
-
A study of stop** power in nuclear reactions at intermediate energies
Authors:
G. Lehaut,
D. Durand,
O. Lopez
Abstract:
We show a systematic experimental study based on INDRA data of the stop** power in central symmetric nuclear reactions. Total mass of the systems goes from 80 to 400 nucleons while the incident energy range is from 12 AMeV to 100 AMeV. The role of isospin diffusion at 32 and 45 MeV/nucleon with 124,136Xe projectiles on 112,124Sn targets performed at GANIL is also discussed. Results suggest a s…
▽ More
We show a systematic experimental study based on INDRA data of the stop** power in central symmetric nuclear reactions. Total mass of the systems goes from 80 to 400 nucleons while the incident energy range is from 12 AMeV to 100 AMeV. The role of isospin diffusion at 32 and 45 MeV/nucleon with 124,136Xe projectiles on 112,124Sn targets performed at GANIL is also discussed. Results suggest a strong memory of the entrance channel above 20 AMeV/A (nuclear transparency) and, as such, constitute valuable tests of the microscopic transport models.
△ Less
Submitted 25 January, 2010;
originally announced January 2010.
-
Isoscaling as a measure of Symmetry Energy in the Lattice Gas Model
Authors:
G. Lehaut,
F. Gulminelli,
O. Lopez
Abstract:
The energetic properties of nuclear clusters inside a low-density, finite-temperature medium are studied with a Lattice Gas Model including isospin dependence and Coulomb forces. Important deviations are observed respect to the Fisher approximation of an ideal gas of non-interacting clusters, but the global energetics can still be approximately expressed in terms of a simple modified energy-dens…
▽ More
The energetic properties of nuclear clusters inside a low-density, finite-temperature medium are studied with a Lattice Gas Model including isospin dependence and Coulomb forces. Important deviations are observed respect to the Fisher approximation of an ideal gas of non-interacting clusters, but the global energetics can still be approximately expressed in terms of a simple modified energy-density functional. The multi-fragmentation regime appears dominated by combinatorial effects in this model, but the isoscaling of the largest fragment in low energy collisions appears a promising observable for the experimental measurement of the symmetry energy.
△ Less
Submitted 12 September, 2008;
originally announced September 2008.
-
Isospin effects in the thermodynamics of finite nuclei
Authors:
Gregory Lehaut,
Francesca Gullminelli,
Olivier Lopez
Abstract:
It has been proposed that multifragmentation can be related to the liquid-gas phase transition of nuclear matter. We study the statistical properties of finite nuclear matter near the phase transition with the help of a Lattice Gas Model (LGM). The original version of LGM with only one type of charge-neutral particles is well known to feature the properties of the liquid-gas phase transition. In…
▽ More
It has been proposed that multifragmentation can be related to the liquid-gas phase transition of nuclear matter. We study the statistical properties of finite nuclear matter near the phase transition with the help of a Lattice Gas Model (LGM). The original version of LGM with only one type of charge-neutral particles is well known to feature the properties of the liquid-gas phase transition. In this contribution, we address the effect of Coulomb and isospin dependence interaction for the finite nuclei transition, and study the symmetry energy properties of finite temperature systems.
△ Less
Submitted 29 January, 2008;
originally announced January 2008.
-
Phase-space methods in nuclear reactions around the Fermi energy
Authors:
Denis Lacroix,
Dominique Durand,
Gregory Lehaut,
Olivier Lopez,
Emmanuel Vient
Abstract:
Some prescriptions for in-medium complex particle production in nuclear reactions are proposed. They have been implemented in two models to simulate nucleon-nucleus (nIPSE) and nucleus-nucleus (HIPSE) reactions around the Fermi energy \cite{Lac04,Lac05}. Our work emphasizes the effect of randomness in cluster formation, the importance of the nucleonic Fermi motion as well as the role of conserva…
▽ More
Some prescriptions for in-medium complex particle production in nuclear reactions are proposed. They have been implemented in two models to simulate nucleon-nucleus (nIPSE) and nucleus-nucleus (HIPSE) reactions around the Fermi energy \cite{Lac04,Lac05}. Our work emphasizes the effect of randomness in cluster formation, the importance of the nucleonic Fermi motion as well as the role of conservation laws. The key role of the phase-space exploration before and after secondary decay is underlined. This is illustrated in the case of two debated issues: the memory loss of the entrance channel in central collisions and the $(N,Z)$ partitions after the pre-equilibrium stage.
△ Less
Submitted 18 January, 2006;
originally announced January 2006.
