-
Vibrational properties of metastable polymorph structures by machine learning
Authors:
Fleur Legrain,
Ambroise van Roekeghem,
Stefano Curtarolo,
Jesus Carrete,
Georg K. H. Madsen,
Natalio Mingo
Abstract:
Despite vibrational properties being critical for the ab initio prediction of the finite temperature stability and transport properties of solids, their inclusion in ab initio materials repositories has been hindered by expensive computational requirements. Here we tackle the challenge, by showing that a good estimation of force constants and vibrational properties can be quickly achieved from the…
▽ More
Despite vibrational properties being critical for the ab initio prediction of the finite temperature stability and transport properties of solids, their inclusion in ab initio materials repositories has been hindered by expensive computational requirements. Here we tackle the challenge, by showing that a good estimation of force constants and vibrational properties can be quickly achieved from the knowledge of atomic equilibrium positions using machine learning. A random-forest algorithm trained on only 121 metastable structures of KZnF$_3$ reaches a maximum absolute error of 0.17 eV/$\textrmÅ^2$ for the interatomic force constants, and it is much less expensive than training the complete force field for such compound. The predicted force constants are then used to estimate phonon spectral features, heat capacities, vibrational entropies, and vibrational free energies, which compare well with the ab initio ones. The approach can be used for the rapid estimation of stability at finite temperatures.
△ Less
Submitted 26 March, 2018;
originally announced March 2018.
-
The AFLOW Fleet for Materials Discovery
Authors:
Cormac Toher,
Corey Oses,
David Hicks,
Eric Gossett,
Frisco Rose,
Pinku Nath,
Demet Usanmaz,
Denise C. Ford,
Eric Perim,
Camilo E. Calderon,
Jose J. Plata,
Yoav Lederer,
Michal Jahnátek,
Wahyu Setyawan,
Shidong Wang,
Junkai Xue,
Kevin Rasch,
Roman V. Chepulskii,
Richard H. Taylor,
Geena Gomez,
Harvey Shi,
Andrew R. Supka,
Rabih Al Rahal Al Orabi,
Priya Gopal,
Frank T. Cerasoli
, et al. (26 additional authors not shown)
Abstract:
The traditional paradigm for materials discovery has been recently expanded to incorporate substantial data driven research. With the intent to accelerate the development and the deployment of new technologies, the AFLOW Fleet for computational materials design automates high-throughput first principles calculations, and provides tools for data verification and dissemination for a broad community…
▽ More
The traditional paradigm for materials discovery has been recently expanded to incorporate substantial data driven research. With the intent to accelerate the development and the deployment of new technologies, the AFLOW Fleet for computational materials design automates high-throughput first principles calculations, and provides tools for data verification and dissemination for a broad community of users. AFLOW incorporates different computational modules to robustly determine thermodynamic stability, electronic band structures, vibrational dispersions, thermo-mechanical properties and more. The AFLOW data repository is publicly accessible online at aflow.org, with more than 1.7 million materials entries and a panoply of queryable computed properties. Tools to programmatically search and process the data, as well as to perform online machine learning predictions, are also available.
△ Less
Submitted 1 December, 2017;
originally announced December 2017.
-
AFLOW-ML: A RESTful API for machine-learning predictions of materials properties
Authors:
Eric Gossett,
Cormac Toher,
Corey Oses,
Olexandr Isayev,
Fleur Legrain,
Frisco Rose,
Eva Zurek,
Jesús Carrete,
Natalio Mingo,
Alexander Tropsha,
Stefano Curtarolo
Abstract:
Machine learning approaches, enabled by the emergence of comprehensive databases of materials properties, are becoming a fruitful direction for materials analysis. As a result, a plethora of models have been constructed and trained on existing data to predict properties of new systems. These powerful methods allow researchers to target studies only at interesting materials $\unicode{x2014}$ neglec…
▽ More
Machine learning approaches, enabled by the emergence of comprehensive databases of materials properties, are becoming a fruitful direction for materials analysis. As a result, a plethora of models have been constructed and trained on existing data to predict properties of new systems. These powerful methods allow researchers to target studies only at interesting materials $\unicode{x2014}$ neglecting the non-synthesizable systems and those without the desired properties $\unicode{x2014}$ thus reducing the amount of resources spent on expensive computations and/or time-consuming experimental synthesis. However, using these predictive models is not always straightforward. Often, they require a panoply of technical expertise, creating barriers for general users. AFLOW-ML (AFLOW $\underline{\mathrm{M}}$achine $\underline{\mathrm{L}}$earning) overcomes the problem by streamlining the use of the machine learning methods developed within the AFLOW consortium. The framework provides an open RESTful API to directly access the continuously updated algorithms, which can be transparently integrated into any workflow to retrieve predictions of electronic, thermal and mechanical properties. These types of interconnected cloud-based applications are envisioned to be capable of further accelerating the adoption of machine learning methods into materials development.
△ Less
Submitted 29 November, 2017;
originally announced November 2017.
-
Materials Screening for the Discovery of New Half-Heuslers: Machine Learning versus Ab Initio Methods
Authors:
Fleur Legrain,
Jesús Carrete,
Ambroise van Roekeghem,
Georg K. H. Madsen,
Natalio Mingo
Abstract:
Machine learning (ML) is increasingly becoming a helpful tool in the search for novel functional compounds. Here we use classification via random forests to predict the stability of half-Heusler (HH) compounds, using only experimentally reported compounds as a training set. Cross-validation yields an excellent agreement between the fraction of compounds classified as stable and the actual fraction…
▽ More
Machine learning (ML) is increasingly becoming a helpful tool in the search for novel functional compounds. Here we use classification via random forests to predict the stability of half-Heusler (HH) compounds, using only experimentally reported compounds as a training set. Cross-validation yields an excellent agreement between the fraction of compounds classified as stable and the actual fraction of truly stable compounds in the ICSD. The ML model is then employed to screen 71,178 different 1:1:1 compositions, yielding 481 likely stable candidates. The predicted stability of HH compounds from three previous high throughput ab initio studies is critically analyzed from the perspective of the alternative ML approach. The incomplete consistency among the three separate ab initio studies and between them and the ML predictions suggests that additional factors beyond those considered by ab initio phase stability calculations might be determinant to the stability of the compounds. Such factors can include configurational entropies and quasiharmonic contributions.
△ Less
Submitted 1 June, 2017;
originally announced June 2017.
-
How the Chemical Composition Alone Can Predict Vibrational Free Energies and Entropies of Solids
Authors:
Fleur Legrain,
Jesús Carrete,
Ambroise van Roekeghem,
Stefano Curtarolo,
Natalio Mingo
Abstract:
Computing vibrational free energies ($F_{vib}$) and entropies ($S_{vib}$) has posed a long standing challenge to the high-throughput ab initio investigation of finite temperature properties of solids. Here we use machine-learning techniques to efficiently predict $F_{vib}$ and $S_{vib}$ of crystalline compounds in the Inorganic Crystal Structure Database. By employing descriptors based simply on t…
▽ More
Computing vibrational free energies ($F_{vib}$) and entropies ($S_{vib}$) has posed a long standing challenge to the high-throughput ab initio investigation of finite temperature properties of solids. Here we use machine-learning techniques to efficiently predict $F_{vib}$ and $S_{vib}$ of crystalline compounds in the Inorganic Crystal Structure Database. By employing descriptors based simply on the chemical formula and using a training set of only 300 compounds, mean absolute errors of less than 0.04 meV/K/atom (15 meV/atom) are achieved for $S_{vib}$ ($F_{vib}$), whose values are distributed within a range of 0.9 meV/K/atom (300 meV/atom.) In addition, for training sets containing fewer than 2,000 compounds the chemical formula alone is shown to perform as well as, if not better than, four other more complex descriptors previously used in the literature. The accuracy and simplicity of the approach mean that it can be advantageously used for the fast screening of phase diagrams or chemical reactions at finite temperatures.
△ Less
Submitted 7 March, 2017;
originally announced March 2017.
-
A First-Principles Comparative Study of Lithium, Sodium, and Magnesium Storage in Pure and Gallium-Doped Germanium: Competition between Interstitial and Substitutional Sites
Authors:
Fleur Legrain,
Sergei Manzhos
Abstract:
Thermodynamics and kinetics of Li, Na, and Mg storage in Ge is studied ab initio. The most stable configurations can consist of tetrahedral, substitutional, or a combination of the two types of sites. In the dilute limit, Li, Na prefer interstitial, while Mg prefers substitutional sites. At higher concentrations of Li, Na, and Mg, there is a combination of interstitial and substitutional sites. Th…
▽ More
Thermodynamics and kinetics of Li, Na, and Mg storage in Ge is studied ab initio. The most stable configurations can consist of tetrahedral, substitutional, or a combination of the two types of sites. In the dilute limit, Li, Na prefer interstitial, while Mg prefers substitutional sites. At higher concentrations of Li, Na, and Mg, there is a combination of interstitial and substitutional sites. This is an important finding, as previous ab initio studies of alloying type electrode materials ignored substitutional sites. Insertion energies computed at dilute concentration (x = 1/64) show that Na and Mg insertion are not thermodynamically favored in Ge vs formation of bulk Na and Mg, as opposed to Li insertion which is favored. We investigate the effect of p-do** of Ge (with Ga) on the thermodynamics and find that it considerably lowers the defect formation energies associated with the insertion of Li/Na/Mg at tetrahedral sites. On the other hand, the energetics associated with Li/Na/Mg insertion at substitutional sites are not significantly affected. In addition, we compute the migration energy barriers for Li/Na/Mg diffusion between two tetrahedral sites (0.38/0.79/0.66 eV), between two substitutional sites (0.77/0.93/1.83 eV), and between two sites of different type (2.15/1.75/0.85 eV).
△ Less
Submitted 27 September, 2016;
originally announced September 2016.
-
Understanding the difference in cohesive energies between alpha and beta tin in DFT calculations
Authors:
Fleur Legrain,
Sergei Manzhos
Abstract:
The transition temperature between the low-temperature alpha phase of tin to beta tin is close to the room temperature (Tab =13C), and the difference in cohesive energy of the two phases at 0 K of about dEcoh=0.02 eV/atom is at the limit of the accuracy of DFT (density functional theory) with available exchange-correlation functionals. It is however critically important to model the relative phase…
▽ More
The transition temperature between the low-temperature alpha phase of tin to beta tin is close to the room temperature (Tab =13C), and the difference in cohesive energy of the two phases at 0 K of about dEcoh=0.02 eV/atom is at the limit of the accuracy of DFT (density functional theory) with available exchange-correlation functionals. It is however critically important to model the relative phase energies correctly for any reasonable description of phenomena and technologies involving these phases, for example, the performance of tin electrodes in electrochemical batteries. Here, we show that several commonly used and converged DFT setups using the most practical and widely used PBE functional result in dEcoh of about 0.04 eV/atom, with different types of basis sets and with different models of core electrons (all-electron or pseudopotentials of different types), which leads to a significant overestimation of Tab. We show that this is due to the errors in relative positions of s and p -like bands, which, combined with different populations of these bands in alpha and beta Sn, leads to overstabilization of alpha tin. We show that this error can be effectively corrected by applying a Hubbard +U correction to s -like states, whereby correct cohesive energies of both alpha and beta Sn can be obtained with the same computational scheme. We quantify for the first time the effects of anharmonicity on dEcoh and find that it is negligible.
△ Less
Submitted 21 January, 2016;
originally announced January 2016.
-
Comparison of alpha- and beta- tin for lithium, sodium, and magnesium storage: an ab initio study including phonon contributions
Authors:
Fleur Legrain,
Oleksandr I. Malyi,
Clas Persson,
Sergei Manzhos
Abstract:
We present a comparative ab initio study of Li, Na, and Mg storage in tin, including phononic effects and phase competition between alpha and beta Sn. Mg do** at low concentration is found to stabilize the beta phase. On the contrary, Li and Na do** is shown to reverse the stability of the phases at room temperature: Li/Na-doped alpha-Sn is more stable than Li/Na-doped beta-Sn up to a temperat…
▽ More
We present a comparative ab initio study of Li, Na, and Mg storage in tin, including phononic effects and phase competition between alpha and beta Sn. Mg do** at low concentration is found to stabilize the beta phase. On the contrary, Li and Na do** is shown to reverse the stability of the phases at room temperature: Li/Na-doped alpha-Sn is more stable than Li/Na-doped beta-Sn up to a temperature of around 380/400 K. This may rationalize the formation of alpha-Sn upon lithiation and delithiation of beta-Sn anodes reported in experimental studies. The changes in phase stability with Li/Na/Mg do** are directly related to the intercalation energies of Li/Na/Mg in one phase versus the other: at 300 K, Li/Na is easier intercalated in alpha-Sn (-0.37/-0.08 eV) than in beta-Sn (0.06/0.49 eV), while Mg intercalation energy is, although positive (i.e. unfavored intercalation), lower in beta-Sn (0.53 eV) than in alpha-Sn (0.66 eV). The temperature effect is found to affect significantly the intercalation energy, by up to 0.13 eV at 300 K. Analysis of diffusion barriers shows that Li, Na, and Mg diffusion in beta-Sn is anisotropic with migration barriers along the (001) direction (respectively 0.01, 0.22, and 0.07 eV) significantly lower than those in alpha-Sn (respectively 0.20, 0.52, and 0.40 eV).
△ Less
Submitted 6 October, 2015;
originally announced October 2015.
-
Amorphous carbon a promising material for sodium ion battery anodes: a first principles study
Authors:
Fleur Legrain,
Konstantinos Kotsis,
Sergei Manzhos
Abstract:
We present a comparative ab initio computational study of sodium and lithium storage in amorphous (glassy) carbon (a-C) vs. graphite. Amorphous structures are obtained by fitting stochastically generated structures to a reference radial distribution function. Li insertion is thermodynamically favored in both graphite and a-C. While sodium insertion is thermodynamically unfavored in graphite, a-C p…
▽ More
We present a comparative ab initio computational study of sodium and lithium storage in amorphous (glassy) carbon (a-C) vs. graphite. Amorphous structures are obtained by fitting stochastically generated structures to a reference radial distribution function. Li insertion is thermodynamically favored in both graphite and a-C. While sodium insertion is thermodynamically unfavored in graphite, a-C possesses multiple insertion sites with binding energies stronger than Na cohesive energy, making it usable as anode material for Na-ion batteries.
△ Less
Submitted 3 February, 2015;
originally announced February 2015.
-
Highly Accurate Local Pseudopotentials of Li, Na, and Mg for Orbital Free Density Functional Theory
Authors:
Fleur Legrain,
Sergei Manzhos
Abstract:
We present a method to make highly accurate pseudopotentials for use with orbital-free density functional theory (OF-DFT) with given exchange-correlation and kinetic energy functionals, which avoids the compounding of errors of Kohn-Sham DFT and OF-DFT. The pseudopotentials are fitted to reference (experimental or highly accurate quantum chemistry) values of interaction energies, geometries, and m…
▽ More
We present a method to make highly accurate pseudopotentials for use with orbital-free density functional theory (OF-DFT) with given exchange-correlation and kinetic energy functionals, which avoids the compounding of errors of Kohn-Sham DFT and OF-DFT. The pseudopotentials are fitted to reference (experimental or highly accurate quantum chemistry) values of interaction energies, geometries, and mechanical properties, using a genetic algorithm. This can enable routine large-scale ab initio simulations of many practically relevant materials. Pseudopotentials for Li, Na, and Mg resulting in accurate geometries and energies of different phases as well as of vacancy formation and bulk moduli are presented as examples.
△ Less
Submitted 25 December, 2014;
originally announced December 2014.
-
Aluminum do** improves the energetics of lithium, sodium, and magnesium storage in silicon
Authors:
Fleur Legrain,
Sergei Manzhos
Abstract:
While Si is an effective insertion type anode for Li-ion batteries, crystalline Si has been shown to be unsuitable for Na and Mg storage due, in particular, to insufficient binding strength. It has recently been reported that Si nanowires could be synthesized with high-concentration (several atomic %) and dispersed Al do**. Here we show based on density functional theory calculations that Al dop…
▽ More
While Si is an effective insertion type anode for Li-ion batteries, crystalline Si has been shown to be unsuitable for Na and Mg storage due, in particular, to insufficient binding strength. It has recently been reported that Si nanowires could be synthesized with high-concentration (several atomic %) and dispersed Al do**. Here we show based on density functional theory calculations that Al do** significantly improves the energetics for Na and Mg insertion, specifically, making it thermodynamically favored versus vacuum reference states. For high Al concentrations, the energy of Mg in Al-doped Si approaches the cohesive energy of Mg. However, the migration barriers for the diffusion of Li (0.57-0.70 eV), Na (1.07-1.19 eV) and Mg (0.97-1.18 eV) in Al-doped Si are found to remain about as high as in pure Si, likely preventing effective electrochemical sodiation and magnesiation.
△ Less
Submitted 2 July, 2014;
originally announced July 2014.
-
Comparative Computational Study of the Energetics of Li, Na, and Mg Storage in Amorphous and Crystalline Silicon
Authors:
Fleur Legrain,
Oleksandr I. Malyi,
Sergei Manzhos
Abstract:
To assess the potential of amorphous Si (a-Si) as an anode for Li, Na, and Mg-ion batteries, the energetics of Li, Na, and Mg atoms in a-Si are computed from first-principles and compared to those in crystalline Si (c-Si). It is shown that Si preamorphization increases the average anode voltage and reduces the volume expansion of the anode during the insertion of the metal atoms. Analysis of compu…
▽ More
To assess the potential of amorphous Si (a-Si) as an anode for Li, Na, and Mg-ion batteries, the energetics of Li, Na, and Mg atoms in a-Si are computed from first-principles and compared to those in crystalline Si (c-Si). It is shown that Si preamorphization increases the average anode voltage and reduces the volume expansion of the anode during the insertion of the metal atoms. Analysis of computed formation energies of Li, Na, and Mg defects in a-Si and c-Si suggests that the energetics of the single atoms into a-Si are thermodynamically more favorable. For instance, defect formation energies of Li, Na, and Mg defects in a-Si are respectively 0.71, 1.72, and 1.82 eV lower compared to those in c-Si. Moreover, the defect formation energies of Li, Na, and Mg defects (vs. vacuum reference states) in a-Si are comparable with the metal cohesive energies and consequently the insertion of the metal atoms might be possible with appropriate control of charging process. This is in contrast to c-Si, where the storage of Na and Mg atoms is limited due to high energy cost of Na and Mg insertion into c-Si.
△ Less
Submitted 30 January, 2014;
originally announced January 2014.