-
A Single-pass Cr:ZnSe Amplifier for Broadband Infared Undulator Radiation
Authors:
M. B. Andorf,
V. A. Lebedev,
P. Piot
Abstract:
An amplifier based on a highly-doped Chromium Zinc-Selenide (Cr:ZnSe) crystal is proposed to increase the pulse energy emitted by an electron bunch after it passes through an undulator magnet. The primary motivation is a possible use of the amplified undulator radiation emitted by a beam circulating in a particle accelerator storage ring to increase the particle beam's phase-space density---a tech…
▽ More
An amplifier based on a highly-doped Chromium Zinc-Selenide (Cr:ZnSe) crystal is proposed to increase the pulse energy emitted by an electron bunch after it passes through an undulator magnet. The primary motivation is a possible use of the amplified undulator radiation emitted by a beam circulating in a particle accelerator storage ring to increase the particle beam's phase-space density---a technique dubbed Optical Stochastic Cooling (OSC). This paper uses a simple four energy level model to estimate the single-pass gain of Cr:ZnSe and presents numerical calculations combined with wave-optics simulations of undulator radiation to estimate the expected properties of the amplified undulator wave-packet.
△ Less
Submitted 12 July, 2020; v1 submitted 27 April, 2020;
originally announced April 2020.
-
Dam** rate limitations for transverse dampers in large hadron colliders
Authors:
V. A. Lebedev
Abstract:
The paper focuses on two issues important for design and operation of bunch-by-bunch transverse damper in a very large hadron collider, where fast dam** is required to suppress beam instabilities and noise induced emittance growth. The first issue is associated with kick variation along a bunch which affects the dam** of head-tail modes. The second issue is associated with affect of damper noi…
▽ More
The paper focuses on two issues important for design and operation of bunch-by-bunch transverse damper in a very large hadron collider, where fast dam** is required to suppress beam instabilities and noise induced emittance growth. The first issue is associated with kick variation along a bunch which affects the dam** of head-tail modes. The second issue is associated with affect of damper noise on the instability threshold.
△ Less
Submitted 30 April, 2020; v1 submitted 21 April, 2020;
originally announced April 2020.
-
Wave-Optics Modeling of the Optical-Transport Line for Passive Optical Stochastic Cooling
Authors:
M. B. Andorf,
V. A. Lebedev,
P. Piot,
J. Ruan
Abstract:
Optical stochastic cooling (OSC) is expected to enable fast cooling of dense particle beams. Transition from microwave to optical frequencies enables an achievement of stochastic cooling rates which are orders of magnitude higher than ones achievable with the classical microwave based stochastic cooling systems. A subsytem critical to the OSC scheme is the focusing optics used to image radiation f…
▽ More
Optical stochastic cooling (OSC) is expected to enable fast cooling of dense particle beams. Transition from microwave to optical frequencies enables an achievement of stochastic cooling rates which are orders of magnitude higher than ones achievable with the classical microwave based stochastic cooling systems. A subsytem critical to the OSC scheme is the focusing optics used to image radiation from the upstream "pickup" undulator to the downstream "kicker" undulator. In this paper, we present simulation results using wave-optics calculation carried out with the {\sc Synchrotron Radiation Workshop} (SRW). Our simulations are performed in support to a proof-of-principle experiment planned at the Integrable Optics Test Accelerator (IOTA) at Fermilab. The calculations provide an estimate of the energy kick received by a 100-MeV electron as it propagates in the kicker undulator and interacts with the electromagnetic pulse it radiated at an earlier time while traveling through the pickup undulator.
△ Less
Submitted 21 November, 2017;
originally announced November 2017.
-
Test of Optical Stochastic Cooling in the IOTA Ring
Authors:
V. A. Lebedev,
Yu. Tokpanov,
M. S. Zolotorev
Abstract:
A new 150 MeV electron storage ring is being built at Fermilab. The construction of a new machine pursues two goals: A test of highly non-linear integrable optics and a test of optical stochastic cooling. This paper discusses details of OSC arrangements, choice of major parameters of the cooling scheme and incoming experimental tests of the optical amplifier prototype which uses highly doped Ti-sa…
▽ More
A new 150 MeV electron storage ring is being built at Fermilab. The construction of a new machine pursues two goals: A test of highly non-linear integrable optics and a test of optical stochastic cooling. This paper discusses details of OSC arrangements, choice of major parameters of the cooling scheme and incoming experimental tests of the optical amplifier prototype which uses highly doped Ti-sapphire crystal as amplification medium.
△ Less
Submitted 18 September, 2014;
originally announced September 2014.
-
PXIE Optics and Layout
Authors:
V. A. Lebedev,
S. Nagaitsev,
J. -F. Ostiguy,
A. V. Shemyakin,
B. G. Shteynas,
N. Solyak,
N. Solyak
Abstract:
The Project X Injector Experiment (PXIE) will serve as a prototype for the Project X front end. The aim is to validate the Project-X design and to decrease technical risks, known to be mainly related to the front end. PXIE will accelerate a 1 mA CW beam to about 25 MeV. It will consist of an ion source, LEBT, CW RFQ, MEBT, two SC cryomodules, a diagnostic section and a beam dump. A bunch-by-bunch…
▽ More
The Project X Injector Experiment (PXIE) will serve as a prototype for the Project X front end. The aim is to validate the Project-X design and to decrease technical risks, known to be mainly related to the front end. PXIE will accelerate a 1 mA CW beam to about 25 MeV. It will consist of an ion source, LEBT, CW RFQ, MEBT, two SC cryomodules, a diagnostic section and a beam dump. A bunch-by-bunch chopper located in the MEBT section will allow formation of an arbitrary bunch structure. PXIE deviates somewhat from the current Project-X front end concept in that it provides additional instrumentation and relies on a reduced number of kickers for bunch chop**; the diagnostic section also include an RF separator to allow studying extinction of removed bunches. The paper discusses the main requirements and constraints motivating the facility layout and optics. Final adjustments to the Project X front end design, if needed, will be based on operational experience gained with PXIE.
△ Less
Submitted 30 January, 2013;
originally announced January 2013.
-
PXIE: Project X Injector Experiment
Authors:
P. N. Ostroumov,
S. D. Holmes,
R. D. Kephart,
J. S. Kerby,
V. A. Lebedev,
C. S. Mishra,
S. Nagaitsev,
A. V. Shemyakin,
N. Solyak,
R. P. Stanek,
D. Li
Abstract:
A multi-MW proton facility, Project X has been proposed and is currently under development at Fermilab. As part of this development program, we are constructing a prototype of the front end of the Project X linac at Fermilab. The construction and successful operations of this facility will validate the concept for the Project X front end, thereby minimizing the primary technical risk element withi…
▽ More
A multi-MW proton facility, Project X has been proposed and is currently under development at Fermilab. As part of this development program, we are constructing a prototype of the front end of the Project X linac at Fermilab. The construction and successful operations of this facility will validate the concept for the Project X front end, thereby minimizing the primary technical risk element within the Project. The Project X Injector Experiment (PXIE) can be constructed over the period FY12-16 and will include an H- ion source, a CW 2.1-MeV RFQ and two SC cryomodules providing up to 30 MeV energy gain at an average beam current of 1 mA. Successful operations of the facility will demonstrate the viability of novel front end technologies that will find applications beyond Project X in the longer term.
△ Less
Submitted 30 January, 2013;
originally announced January 2013.
-
Fermilab PXIE Beam Diagnostics Development and Testing at the HINS Beam Facility
Authors:
V. A. Lebedev,
A. V. Shemyakin,
J. Steimel,
M. Wendt,
B. M. Hanna,
L. R. Prost,
V. E. Scarpine
Abstract:
Fermilab is planning the construction of a prototype front end of the Project X linac. The Project X Injector Experiment (PXIE) is expected to accelerate 1 mA cw H- beam up to 30 MeV. Some of the major goals of the project are to test a cw RFQ and H- source, a broadband bunch-by-bunch beam chopper and a low-energy superconducting linac. The successful characterization and operation of such an acce…
▽ More
Fermilab is planning the construction of a prototype front end of the Project X linac. The Project X Injector Experiment (PXIE) is expected to accelerate 1 mA cw H- beam up to 30 MeV. Some of the major goals of the project are to test a cw RFQ and H- source, a broadband bunch-by-bunch beam chopper and a low-energy superconducting linac. The successful characterization and operation of such an accelerator places stringent requirements on beam line diagnostics. These crucial beam measurements include bunch currents, beam orbit, beam phase, bunch length, transverse profile and emittance, beam halo and tails, as well as the extinction performance of the broadband chopper. This paper presents PXIE beam measurement requirements and instrumentation development plans. Also presented are plans to test many of these instruments at the Fermilab High Intensity Neutrino Source (HINS) beam facility. Since HINS is already an operational accelerator, utilizing HINS for instrumentation testing allows for quicker development of the required PXIE diagnostics.
△ Less
Submitted 28 January, 2013;
originally announced January 2013.
-
Broad-band chopper for a CW proton linac at Fermilab
Authors:
E. Gianfelice-Wendt,
V. A. Lebedev,
N. Solyak,
S. Nagaitsev,
D. Sun
Abstract:
Requirements and technical limitations to the bunch-by-bunch chopper for the Fermilab Project X are discussed.
Requirements and technical limitations to the bunch-by-bunch chopper for the Fermilab Project X are discussed.
△ Less
Submitted 13 August, 2012;
originally announced August 2012.
-
Betatron motion with coupling of horizontal and vertical degrees of freedom
Authors:
V. A. Lebedev,
S. A. Bogacz
Abstract:
Presently, there are two most frequently used parameterizations of linear x-y coupled motion used in the accelerator physics. They are the Edwards-Teng and Mais-Ripken parameterizations. The article is devoted to an analysis of close relationship between the two representations, thus adding a clarity to their physical meaning. It also discusses the relationship between the Eigen-vectors, the beta-…
▽ More
Presently, there are two most frequently used parameterizations of linear x-y coupled motion used in the accelerator physics. They are the Edwards-Teng and Mais-Ripken parameterizations. The article is devoted to an analysis of close relationship between the two representations, thus adding a clarity to their physical meaning. It also discusses the relationship between the Eigen-vectors, the beta-functions, second order moments and the bi-linear form representing the particle ellipsoid in the 4D phase space. Then, it considers a further development of Mais-Ripken parameterization where the particle motion is described by 10 parameters: four beta-functions, four alpha-functions and two betatron phase advances. In comparison with Edwards-Teng parameterization the chosen parameterization has an advantage that it works equally well for analysis of coupled betatron motion in circular accelerators and in transfer lines. Considered relationship between second order moments, Eigen-vectors and beta-functions can be useful in interpreting tracking results and experimental data. As an example, the developed formalism is applied to the FNAL electron cooler and Derbenev's vertex-to-plane adapter.
△ Less
Submitted 23 July, 2012;
originally announced July 2012.
-
Search for Heavy Neutrino in K->mu nu_h(nu_h-> nu gamma) Decay at ISTRA+ Setup
Authors:
ISTRA+ collaboration,
:,
V. A. Duk,
V. N. Bolotov,
A. A. Khudyakov,
V. A. Lebedev,
A. I. Makarov,
V. P. Novikov,
A. Yu. Polyarush,
S. A. Akimenko,
G. I. Britvich,
A. P. Filin,
A. V. Inyakin,
S. A. Kholodenko,
V. M. Leontiev,
V. F. Obraztsov,
V. A. Polyakov,
V. I. Romanovsky,
O. V. Stenyakin,
O. G. Tchikilev,
V. A. Uvarov,
O. P. Yushchenko
Abstract:
Heavy neutrino nu_h with m_h < 300MeV/c^2 can be effectively searched for in kaon decays. We put upper limits on mixing matrix element |U_mu_h}|^2 for radiatively decaying nu_h from K->mu nu_h (nu_h -> nu gamma) decay chain in the following parameter region: 30MeV/c^2 < m_h < 80MeV/c^2; 10^{-11}sec < tau_h < 10^{-9}sec. For the whole region |U_{mu h}|^2 < 5 x 10^{-5} for Majorana type of nu_h and…
▽ More
Heavy neutrino nu_h with m_h < 300MeV/c^2 can be effectively searched for in kaon decays. We put upper limits on mixing matrix element |U_mu_h}|^2 for radiatively decaying nu_h from K->mu nu_h (nu_h -> nu gamma) decay chain in the following parameter region: 30MeV/c^2 < m_h < 80MeV/c^2; 10^{-11}sec < tau_h < 10^{-9}sec. For the whole region |U_{mu h}|^2 < 5 x 10^{-5} for Majorana type of nu_h and | U_{μh}|^2 < 8 x 10^{-5} for the Dirac case.
△ Less
Submitted 11 April, 2012; v1 submitted 7 October, 2011;
originally announced October 2011.
-
Extraction of Kaon Formfactors from K^- -> mu^- nu_mu gamma Decay at ISTRA+ Setup
Authors:
The ISTRA+ Collaboration,
:,
V. A. Duk,
V. N. Bolotov,
A. A. Khudyakov,
V. A. Lebedev,
A. I. Makarov,
V. P. Novikov,
A. Yu. Polyarush,
S. A. Akimenko,
G. I. Britvich,
A. P. Filin,
A. V. Inyakin,
I. Ya. Korolkov,
V. M. Leontiev,
V. F. Obraztsov,
V. A. Polyakov,
V. I. Romanovsky,
O. G. Tchikilev,
V. A. Uvarov,
O. P. Yushchenko
Abstract:
The radiative decay K->mu nu gamma has been studied at ISTRA+ setup in a new kinematical region. About 22K events of K^- -> mu^- nu_mu gamma have been observed. The sign and value of Fv-Fa have been measured for the first time. The result is Fv-Fa=0.21(4)(4).
The radiative decay K->mu nu gamma has been studied at ISTRA+ setup in a new kinematical region. About 22K events of K^- -> mu^- nu_mu gamma have been observed. The sign and value of Fv-Fa have been measured for the first time. The result is Fv-Fa=0.21(4)(4).
△ Less
Submitted 12 April, 2012; v1 submitted 19 May, 2010;
originally announced May 2010.
-
Study of K- -> pi0 e nu gamma decay with ISTRA+ setup
Authors:
V. N. Bolotov,
E. N. Guschin,
V. A. Duk,
S. V. Laptev,
V. A. Lebedev,
A. E. Mazurov,
A. Yu. Polyarush,
V. E. Postoev,
S. A. Akimenko,
G. I. Britvich,
K. V. Datsko,
A. P. Filin,
A. V. Inyakin,
V. F. Konstantinov,
A. S. Konstantinov,
I. Y. Korolkov,
V. A. Khmelnikov,
V. M. Leontiev,
V. P. Novikov,
V. F. Obraztsov,
V. A. Polyakov,
V. I. Romanovsky,
V. I. Shelikhov,
O. G. Tchikilev,
V. A. Uvarov
, et al. (1 additional authors not shown)
Abstract:
Results of study of the radiative kaon decay K-->pi0 e nu gamma at ISTRA+ setup are presented. 4476 events of this decay have been observed. The branching ratio is measured.
Results of study of the radiative kaon decay K-->pi0 e nu gamma at ISTRA+ setup are presented. 4476 events of this decay have been observed. The branching ratio is measured.
△ Less
Submitted 1 December, 2006; v1 submitted 24 October, 2005;
originally announced October 2005.
-
Measuring and Controlling the Energy Spread in CEBAF
Authors:
G. A. Krafft,
J. -C. Denard,
R. W. Dickson,
R. Kazimi,
V. A. Lebedev,
M. G. Tiefenback
Abstract:
As compared to electron storage rings, one advantage of recirculating linear accelerators is that the beam properties at target are no longer dominated by the equilibrium between quantum radiative diffusion and radiation dam** because new beam is continually injected into the accelerator. This allows the energy spread from a CEBAF-type machine to be relatively small; the measured energy spread…
▽ More
As compared to electron storage rings, one advantage of recirculating linear accelerators is that the beam properties at target are no longer dominated by the equilibrium between quantum radiative diffusion and radiation dam** because new beam is continually injected into the accelerator. This allows the energy spread from a CEBAF-type machine to be relatively small; the measured energy spread from CEBAF at 4 GeV is less than 100 parts per million accumulated over times of order several days. In this paper, the various subsystems contributing to the energy spread of a CEBAF-type accelerator are reviewed, as well as the machine diagnostics and controls that are used in CEBAF to ensure that a small energy spread is provided during routine running. Examples of relevant developments are (1) stable short bunches emerging from the injector, (2) precision timing and phasing of the linacs with respect to the centroid of the beam bunches on all passes, (3) implementing 2 kHz sampling rate feedback systems for final energy stabilization, and (4) continuous beam energy spread monitoring with optical transition radiation devices. We present measurement results showing that small energy spreads are achieved over extended periods.
△ Less
Submitted 27 September, 2000;
originally announced September 2000.
