-
Variable-wavelength quick scanning nano-focused X-ray microscopy for in situ strain and tilt map**
Authors:
Marie-ingrid Richard,
Thomas W Cornelius,
Florian Lauraux,
Jean-Baptiste Molin,
Christoph Kirchlechner,
Steven J Leake,
Jérôme Carnis,
Tobias U Schülli,
Ludovic Thilly,
Olivier Thomas
Abstract:
Compression of micro-pillars is followed in situ by a quick nano-focused X-ray scanning microscopy technique combined with three-dimensional reciprocal space map**. Compared to other attempts using 2 X-ray nanobeams, it avoids any motion or vibration that would lead to a destruction of the sample. The technique consists of scanning both the energy of the incident nano-focused X-ray beam and the…
▽ More
Compression of micro-pillars is followed in situ by a quick nano-focused X-ray scanning microscopy technique combined with three-dimensional reciprocal space map**. Compared to other attempts using 2 X-ray nanobeams, it avoids any motion or vibration that would lead to a destruction of the sample. The technique consists of scanning both the energy of the incident nano-focused X-ray beam and the in-plane translations of the focusing optics along the X-ray beam. Here, we demonstrate the approach by imaging the strain and lattice orientation of Si micro-pillars and their pedestals during in situ compression. Varying the energy of the incident beam instead of rocking the sample and map** the focusing optics instead of moving the sample supplies a vibration-free measurement of the reciprocal space maps without removal of the mechanical load. The maps of strain and lattice orientation are in good agreement with the ones recorded by ordinary rocking-curve scans. Variable-wavelength quick scanning X-ray microscopy opens the route for in situ strain and tilt map** towards more diverse and complex materials environments, especially where sample manipulation is difficult.
△ Less
Submitted 27 June, 2022;
originally announced June 2022.
-
Imaging the Breathing of a Platinum Nanoparticle in Electrochemical Environment
Authors:
Clément Atlan,
Corentin Chatelier,
Maxime Dupraz,
Isaac Martens,
Arnaud Viola,
Ni Li,
Lu Gao,
Steven J. Leake,
Tobias U. Schülli,
Joël Eymery,
Frédéric Maillard,
Marie-Ingrid Richard
Abstract:
Surface strain is widely used in gas phase catalysis and electrocatalysis to control the binding energies of adsorbates on metal surfaces. However, $in$ $situ$ or $operando$ strain measurements are experimentally challenging, especially on nanomaterials. Here, we take advantage of the 4$^{th}$ generation Extremely Brilliant Source at the European Synchrotron Radiation Facility (ESRF-EBS, Grenoble,…
▽ More
Surface strain is widely used in gas phase catalysis and electrocatalysis to control the binding energies of adsorbates on metal surfaces. However, $in$ $situ$ or $operando$ strain measurements are experimentally challenging, especially on nanomaterials. Here, we take advantage of the 4$^{th}$ generation Extremely Brilliant Source at the European Synchrotron Radiation Facility (ESRF-EBS, Grenoble, France) to quantify the distribution of strain inside a Pt nanoparticle, and to determine its morphology in an electrochemical environment. Our results show for the first time evidence of heterogeneous and potential-dependent strain distribution between highly-coordinated ({100} and {111} facets) and under-coordinated atoms (edges and corners) as well as evidence of strain propagation from the surface to the bulk of the nanoparticle. These results provide dynamic structural insights to better simulate and design efficient nanocatalysts for energy storage and conversion applications.
△ Less
Submitted 2 February, 2023; v1 submitted 14 March, 2022;
originally announced March 2022.
-
Bragg Coherent Imaging of nanoprecipitates: role of superstructure reflections
Authors:
Maxime Dupraz,
Steven J. Leake,
Marie-Ingrid Richard
Abstract:
Coherent precipitation of ordered phases is responsible for providing exceptional high temperature mechanical properties in a wide range of compositionally complex alloys (CCAs). Ordered phases are also essential to enhance the magnetic or catalytic properties of alloyed nanoparticles. The present work aims at demonstrating the relevance of Bragg coherent diffraction imaging (BCDI) to study bulk a…
▽ More
Coherent precipitation of ordered phases is responsible for providing exceptional high temperature mechanical properties in a wide range of compositionally complex alloys (CCAs). Ordered phases are also essential to enhance the magnetic or catalytic properties of alloyed nanoparticles. The present work aims at demonstrating the relevance of Bragg coherent diffraction imaging (BCDI) to study bulk and thin film samples or isolated nanoparticles containing coherent nanoprecipitates / ordered phases. Crystals of a few tens of nanometres are modelled with realistic interatomic potentials and relaxed after introduction of coherent ordered nanoprecipitates. Diffraction patterns from fundamental and superstructure reflections are calculated in the kinematic approximation and used as input to retrieve the strain fields using algorithmic inversion. We first tackle the case of single nanoprecipitates and show that the strain field distribution from the ordered phase is retrieved very accurately. Then, we investigate the influence of the order parameter S on the strain field retrieved from the superstructure reflections and evidence that a very accurate strain distribution can be retrieved for partially ordered phases with large and inhomogeneous strains. In a subsequent section, we evaluate the relevance of BCDI for the study of systems containing many precipitates and demonstrate that the technique is relevant for such systems. Finally, we discuss the experimental feasibility of using BCDI to image ordered phases, in the light of the new possibilities offered by the 4 th generation synchrotron sources.
△ Less
Submitted 24 February, 2021;
originally announced February 2021.
-
Evidence of Charge Density Wave transverse pinning by x-ray micro-diffraction
Authors:
E. Bellec,
I. Gonzalez-Vallejo,
V. L. R. Jacques,
A. A. Sinchenko,
A. P. Orlov,
P. Monceau,
S. J. Leake,
D. Le Bolloc'h
Abstract:
Incommensurate charge density waves (CDW) have the extraordinary ability to display non-Ohmic behavior when submitted to an external field. The mechanism leading to this non trivial dynamics is still not well understood, although recent experimental studies tend to prove that it is due to solitonic transport. Solitons could come from the relaxation of the strained CDW within an elastic-to-plastic…
▽ More
Incommensurate charge density waves (CDW) have the extraordinary ability to display non-Ohmic behavior when submitted to an external field. The mechanism leading to this non trivial dynamics is still not well understood, although recent experimental studies tend to prove that it is due to solitonic transport. Solitons could come from the relaxation of the strained CDW within an elastic-to-plastic transition. However, the nucleation process and the transport of these charged topological objects have never been observed at the local scale until now. In this letter, we use in-situ scanning x-ray micro-diffraction with micrometer resolution of a NbSe$_3$ sample designed to have sliding and non-sliding areas. Direct imaging of the charge density wave deformation is obtained using an analytical approach based on the phase gradient to disentangle the transverse from the longitudinal components over a large surface of a hundred microns size. We show that the CDW dissociates itself from the host lattice in the sliding regime and displays a large transverse deformation, ten times larger than the longitudinal one and strongly dependent on the amplitude and the direction of the applied currents. This deformation continuously extends across the macroscopic sample dimensions, over a distance 10 000 times greater than the CDW wavelength despite the presence of strong defects while remaining strongly pinned by the lateral surfaces. This 2D quantitative study highlights the prominent role of shear effect that should play a significant role in the nucleation of solitons.
△ Less
Submitted 17 February, 2020; v1 submitted 9 May, 2019;
originally announced May 2019.
-
Domain Wall Orientations in Ferroelectric Superlattices Probed with Synchrotron X-Ray Diffraction
Authors:
Marios Hadjimichael,
Edoardo Zatterin,
Stéphanie Fernandez-Peña,
Steven J. Leake,
Pavlo Zubko
Abstract:
Ferroelectric domains in PbTiO$_3$/SrTiO$_3$ superlattices were studied using synchrotron X-ray diffraction. Macroscopic measurements revealed a change in the domain wall orientation from $\left\lbrace 100 \right\rbrace $ to $\left\lbrace 110 \right\rbrace $ crystallographic planes with increasing temperature. The temperature range of this reorientation depends on the ferroelectric layer thickness…
▽ More
Ferroelectric domains in PbTiO$_3$/SrTiO$_3$ superlattices were studied using synchrotron X-ray diffraction. Macroscopic measurements revealed a change in the domain wall orientation from $\left\lbrace 100 \right\rbrace $ to $\left\lbrace 110 \right\rbrace $ crystallographic planes with increasing temperature. The temperature range of this reorientation depends on the ferroelectric layer thickness and domain period. Using a nanofocused beam, local changes in domain wall orientation within the buried ferroelectric layers were imaged, both in structurally uniform regions of the sample and near defect sites and argon ion etched patterns. Domain walls were found to exhibit preferential alignment with the straight edges of the etched patterns as well as with structural features associated with defect sites. The distribution of out-of-plane lattice parameters was mapped around one such feature, showing that it is accompanied by inhomogeneous strain and large strain gradients.
△ Less
Submitted 5 January, 2018;
originally announced January 2018.
-
Chemistry and structure of homoepitaxial SrTiO$_3$ films and their influence on oxide-heterostructure interfaces
Authors:
M. L. Reinle-Schmitt,
C. Cancellieri,
A. Cavallaro,
S. J. Leake,
E. Pomjakushina,
J. A. Kilner,
P. R. Willmott
Abstract:
The properties of single-crystal SrTiO$_{3}$ substrates and homoepitaxial SrTiO$_{3}$ films grown by pulsed laser deposition have been compared, in order to understand the loss of interfacial conductivity when more than a critical thickness of nominally homoepitaxial SrTiO$_{3}$ is inserted between a LaAlO$_{3}$ film and a SrTiO$_{3}$ substrate. In particular, the chemical composition and the stru…
▽ More
The properties of single-crystal SrTiO$_{3}$ substrates and homoepitaxial SrTiO$_{3}$ films grown by pulsed laser deposition have been compared, in order to understand the loss of interfacial conductivity when more than a critical thickness of nominally homoepitaxial SrTiO$_{3}$ is inserted between a LaAlO$_{3}$ film and a SrTiO$_{3}$ substrate. In particular, the chemical composition and the structure of homoepitaxial SrTiO$_{3}$ investigated by low-energy ion-scattering and surface x-ray diffraction, show that for insulating heterointerfaces, a Sr-excess is present between the LaAlO$_{3}$ and homoepitaxial SrTiO$_{3}$. Furthermore, an increase in the out-of-plane lattice constant is observed in LaAlO$_{3}$, indicating that the conductivity both with and without insertion of SrTiO$_{3}$ thin film originates from a Zener breakdown associated with the polar catastrophe. When more than a critical thickness of homoepitaxial SrTiO$_{3}$ is inserted between LaAlO$_3$ and SrTiO$_3$, the electrons transferred by the electronic reconstruction are trapped by the formation of a Sr-rich secondary phase and Sr-vacancies. The migration of Sr towards the surface of homoepitaxial STO and accompanying loss of interfacial conductivity can be delayed by reducing the Sr-content in the PLD target.
△ Less
Submitted 9 December, 2013;
originally announced December 2013.
-
Structural Examination of Au/Ge(001) by Surface X-Ray Diffraction and Scanning Tunneling Microscopy
Authors:
S. Meyer,
T. Umbach,
C. Blumenstein,
J. Schäfer,
R. Claessen,
S. Sauer,
S. J. Leake,
P. R. Willmott,
M. Fiedler,
F. Bechstedt
Abstract:
The one-dimensional reconstruction of Au/Ge(001) was investigated by means of autocorrelation functions from surface x-ray diffraction (SXRD) and scanning tunneling microscopy (STM). Interatomic distances found in the SXRD-Patterson map are substantiated by results from STM. The Au coverage, recently determined to be 3/4 of a monolayer of gold, together with SXRD leads to three non-equivalent posi…
▽ More
The one-dimensional reconstruction of Au/Ge(001) was investigated by means of autocorrelation functions from surface x-ray diffraction (SXRD) and scanning tunneling microscopy (STM). Interatomic distances found in the SXRD-Patterson map are substantiated by results from STM. The Au coverage, recently determined to be 3/4 of a monolayer of gold, together with SXRD leads to three non-equivalent positions for Au within the c(8x2) unit cell. Combined with structural information from STM topography and line profiling, two building blocks are identified: Au-Ge hetero-dimers within the top wire architecture and Au homo-dimers within the trenches. The incorporation of both components is discussed using density functional theory and model based Patterson maps by substituting Germanium atoms of the reconstructed Ge(001) surface.
△ Less
Submitted 4 May, 2012;
originally announced May 2012.
-
Evolution of the interfacial structure of LaAlO3 on SrTiO3
Authors:
S. A. Pauli,
S. J. Leake,
B. Delley,
M. Björck,
C. W. Schneider,
C. M. Schlepütz,
D. Martoccia,
S. Paetel,
J. Mannhart,
P. R. Willmott
Abstract:
The evolution of the atomic structure of LaAlO3 grown on SrTiO3 was investigated using surface x-ray diffraction in conjunction with model-independent, phase-retrieval algorithms between two and five monolayers film thickness. A depolarizing buckling is observed between cation and oxygen positions in response to the electric field of polar LaAlO3, which decreases with increasing film thickness. We…
▽ More
The evolution of the atomic structure of LaAlO3 grown on SrTiO3 was investigated using surface x-ray diffraction in conjunction with model-independent, phase-retrieval algorithms between two and five monolayers film thickness. A depolarizing buckling is observed between cation and oxygen positions in response to the electric field of polar LaAlO3, which decreases with increasing film thickness. We explain this in terms of competition between elastic strain energy, electrostatic energy, and electronic reconstructions. The findings are qualitatively reproduced by density-functional theory calculations. Significant cationic intermixing across the interface extends approximately three monolayers for all film thicknesses. The interfaces of films thinner than four monolayers therefore extend to the surface, which might affect conductivity.
△ Less
Submitted 10 September, 2010;
originally announced September 2010.
