Showing 1–50 of 122 results for author: LeDuc

A Near Quantum Limited Sub-GHz TiN Kinetic Inductance Traveling Wave Parametric Amplifier Operating in a Frequency Translating Mode

Authors: Farzad Faramarzi, Sasha Sypkens, Ryan Stephenson, Byeong H. Eom, Henry Leduc, Saptarshi Chaudhuri, Peter Day

Abstract: We present the design and experimental characterization of a kinetic-inductance traveling-wave parametric amplifier (KI-TWPA) for sub-GHz frequencies. KI-TWPAs amplify signals through nonlinear mixing processes supported by the nonlinear kinetic inductance of a superconducting transmission line. The device described here utilizes a compactly meandered TiN microstrip transmission line to achieve th… ▽ More We present the design and experimental characterization of a kinetic-inductance traveling-wave parametric amplifier (KI-TWPA) for sub-GHz frequencies. KI-TWPAs amplify signals through nonlinear mixing processes supported by the nonlinear kinetic inductance of a superconducting transmission line. The device described here utilizes a compactly meandered TiN microstrip transmission line to achieve the length needed to amplify sub-GHz signals. It is operated in a frequency translating mode where the amplified signal tone is terminated at the output of the amplifier, and the idler tone at approximately 2.5~GHz is brought out of the cryostat. By varying the pump frequency, a gain of up to 22 dB was achieved in a tunable range from about 450 to 850~MHz. Use of TiN as the nonlinear element allows for a reduction of the required pump power by roughly an order of magnitude relative to NbTiN, which has been used for previous KI-TWPA implementations. This amplifier has the potential to enable high-sensitivity and high-speed measurements in a wide range of applications, such as quantum computing, astrophysics, and dark matter detection. △ Less

Submitted 1 June, 2024; originally announced June 2024.

A 25-micron single photon sensitive kinetic inductance detector

Authors: Peter K. Day, Nicholas F. Cothard, Christopher Albert, Logan Foote, Elijah Kane, Byeong H. Eom, Ritoban Basu Thakur, Reinier M. J. Janssen, Andrew Beyer, Pierre Echternach, Sven van Berkel, Steven Hailey-Dunsheath, Thomas R. Stevenson, Shahab Dabironezare, Jochem J. A. Baselmans, Jason Glenn, C. Matt Bradford, Henry G. Leduc

Abstract: We report measurements characterizing the performance of a kinetic inductance detector array designed for a wavelength of 25 microns and very low optical background level suitable for applications such as a far-infrared instrument on a cryogenically cooled space telescope. In a pulse counting mode of operation at low optical flux, the detectors can resolve individual 25-micron photons. In an integ… ▽ More We report measurements characterizing the performance of a kinetic inductance detector array designed for a wavelength of 25 microns and very low optical background level suitable for applications such as a far-infrared instrument on a cryogenically cooled space telescope. In a pulse counting mode of operation at low optical flux, the detectors can resolve individual 25-micron photons. In an integrating mode, the detectors remain photon noise limited over more than six orders of magnitude in absorbed power from 70 zW to 200 fW, with a limiting NEP of 4.6 x 10^-20 W/rtHz at 1 Hz. In addition, the detectors are highly stable with flat power spectra under optical load down to 1 mHz. Operational parameters of the detector are determined including the efficiency of conversion of the incident optical power into quasiparticles in the aluminum absorbing element and the quasiparticle self-recombination constant. △ Less

Submitted 14 May, 2024; v1 submitted 15 April, 2024; originally announced April 2024.

Comments: 35 pages, 18 figures

A 4-8 GHz Kinetic Inductance Travelling-Wave Parametric Amplifier Using Four-Wave Mixing with Near Quantum-Limit Noise Performance

Authors: Farzad Faramarzi, Ryan Stephenson, Sasha Sypkens, Byeong H. Eom, Henry LeDuc, Peter Day

Abstract: Kinetic inductance traveling-wave parametric amplifiers (KI-TWPA) have a wide instantaneous bandwidth with near quantum-limited performance and a relatively high dynamic range. Because of this, they are suitable readout devices for cryogenic detectors and superconducting qubits and have a variety of applications in quantum sensing. This work discusses the design, fabrication, and performance of a… ▽ More Kinetic inductance traveling-wave parametric amplifiers (KI-TWPA) have a wide instantaneous bandwidth with near quantum-limited performance and a relatively high dynamic range. Because of this, they are suitable readout devices for cryogenic detectors and superconducting qubits and have a variety of applications in quantum sensing. This work discusses the design, fabrication, and performance of a KI-TWPA based on four-wave mixing in a NbTiN microstrip transmission line. This device amplifies a signal band from 4 to 8~GHz without contamination from image tones, which are produced in a separate higher frequency band. The 4 - 8~GHz band is commonly used to read out cryogenic detectors, such as microwave kinetic inductance detectors (MKIDs) and Josephson junction-based qubits. We report a measured maximum gain of over 20 dB using four-wave mixing with a 1-dB gain compression point of -58 dBm at 15 dB of gain over that band. The bandwidth and peak gain are tunable by adjusting the pump-tone frequency and power. Using a Y-factor method, we measure an amplifier-added noise of $ 0.5 \leq N_{added} \leq 1.5$ photons from 4.5 - 8 GHz. △ Less

Submitted 3 June, 2024; v1 submitted 18 February, 2024; originally announced February 2024.

Significant noise improvement in a Kinetic Inductance Phonon-Mediated detector by use of a wideband parametric amplifier

Authors: Karthik Ramanathan, Osmond Wen, Taylor Aralis, Ritoban Basu Thakur, Bruce Bumble, Yen-Yung Chang, Peter K. Day, Byeong Ho Eom, Henry G. LeDuc, Brandon J. Sandoval, Ryan Stephenson, Sunil R. Golwala

Abstract: Microwave Kinetic Inductance Detectors (MKIDs) have been demonstrated as capable phonon sensors when coupled to crystalline substrates, and have been proposed as detectors for next-generation rare-event searches such as for the direct detection of dark matter. These Kinetic Inductance Phonon Mediated (KIPM) detector designs, favoring large superconducting absorber volumes and high readout powers,… ▽ More Microwave Kinetic Inductance Detectors (MKIDs) have been demonstrated as capable phonon sensors when coupled to crystalline substrates, and have been proposed as detectors for next-generation rare-event searches such as for the direct detection of dark matter. These Kinetic Inductance Phonon Mediated (KIPM) detector designs, favoring large superconducting absorber volumes and high readout powers, are oftentimes limited in their sensitivity by low temperature amplifier noise introduced in the signal readout chain. We report here an effort to couple a wideband Kinetic Inductance Travelling Wave Parametric Amplifier (KI-TWPA), operated near the Standard Quantum Limit of minimal added amplifier noise, to sensors spanning a 70 MHz bandwidth at 3.5 GHz. This results in a ~5x improvement in the inferred detector energy resolution in the best sensor and highlights the potential of constructing O(100) meV resolving phonon-mediated particle detectors. We detail limitations introduced by lossy passive components, degraded RF responsivity, and microphysical noise sources like two-level systems (TLS), in achieving ultimate quantum-limited system noise levels. △ Less

Submitted 8 February, 2024; originally announced February 2024.

Comments: 7 pages, 4 figures

Frequency-domain multiplexing of SNSPDs with tunable superconducting resonators

Authors: Sasha Sypkens, Lorenzo Minutolo, Sahil Patel, Emanuel Knehr, Alexander B. Walter, Henry G. Leduc, Lautaro Narváez, Ralph Chamberlin, Tracee Jamison-Hooks, Matthew D. Shaw, Peter K. Day, Boris Korzh

Abstract: This work culminates in a demonstration of an alternative Frequency Domain Multiplexing (FDM) scheme for Superconducting Nanowire Single-Photon Detectors (SNSPDs) using the Kinetic inductance Parametric UP-converter (KPUP) made out of NbTiN. There are multiple multiplexing architectures for SNSPDs that are already in use, but FDM could prove superior in applications where the operational bias curr… ▽ More This work culminates in a demonstration of an alternative Frequency Domain Multiplexing (FDM) scheme for Superconducting Nanowire Single-Photon Detectors (SNSPDs) using the Kinetic inductance Parametric UP-converter (KPUP) made out of NbTiN. There are multiple multiplexing architectures for SNSPDs that are already in use, but FDM could prove superior in applications where the operational bias currents are very low, especially for mid- and far-infrared SNSPDs. Previous FDM schemes integrated the SNSPD within the resonator, while in this work we use an external resonator, which gives more flexibility to optimize the SNSPD architecture. The KPUP is a DC-biased superconducting resonator in which a nanowire is used as its inductive element to enable sensitivity to current perturbations. When coupled to an SNSPD, the KPUP can be used to read out current pulses on the few $μ$A scale. The KPUP is made out of NbTiN, which has high non-linear kinetic inductance for increased sensitivity at higher current bias and high operating temperature. Meanwhile, the SNSPD is made from WSi, which is a popular material for broadband SNSPDs. To read out the KPUP and SNSPD array, a software-defined radio platform and a graphics processing unit are used. Frequency Domain Multiplexed SNSPDs have applications in astronomy, remote sensing, exoplanet science, dark matter detection, and quantum sensing. △ Less

Submitted 30 January, 2024; originally announced January 2024.

Parallel-Plate Capacitor Titanium Nitride Kinetic Inductance Detectors for Infrared Astronomy

Authors: Joanna Perido, Peter K. Day, Andrew D. Beyer, Nicholas F. Cothard, Steven Hailey-Dunsheath, Henry G. Leduc, Byeong H. Eom, Jason Glenn

Abstract: The Balloon Experiment for Galactic INfrared Science (BEGINS) is a concept for a sub-orbital observatory that will operate from $λ$ = 25-250 $μ$m to characterize dust in the vicinity of high-mass stars. The mission's sensitivity requirements will be met by utilizing arrays of 1,840 lens-coupled, lumped-element kinetic inductance detectors (KIDs) operating at 300 mK. Each KID will consist of a tita… ▽ More The Balloon Experiment for Galactic INfrared Science (BEGINS) is a concept for a sub-orbital observatory that will operate from $λ$ = 25-250 $μ$m to characterize dust in the vicinity of high-mass stars. The mission's sensitivity requirements will be met by utilizing arrays of 1,840 lens-coupled, lumped-element kinetic inductance detectors (KIDs) operating at 300 mK. Each KID will consist of a titanium nitride (TiN) parallel strip absorbing inductive section and parallel plate capacitor (PPC) deposited on a silicon (Si) substrate. The PPC geometry allows for reduction of the pixel spacing. At the BEGINS focal plane the detectors require optical NEPs from $2\times10^{-16}$ W/$\sqrt{\textrm{Hz}}$ to $6\times10^{-17}$ W/$\sqrt{\textrm{Hz}}$ from 25-250 $μ$m for optical loads ranging from 4 pW to 10 pW. We present the design, optical performance and quasiparticle lifetime measurements of a prototype BEGINS KID array at 25 $μ$m when coupled to Fresnel zone plate lenses. For our optical set up and the absorption efficiency of the KIDs, the electrical NEP requirement at 25 $μ$m is $7.6\times10^{-17}$ W/$\sqrt{\textrm{Hz}}$ for an absorbed optical power of 0.36 pW. We find that over an average of five resonators the the detectors are photon noise limited down to about 200 fW, with a limiting NEP of about $7.4\times10^{-17}$ W/$\sqrt{\textrm{Hz}}$. △ Less

Submitted 28 December, 2023; originally announced December 2023.

Plasma-enhanced atomic layer deposition of titanium nitride for superconducting devices

Authors: John Femi-Oyetoro, Sasha Sypkens, Henry LeDuc, Matthew Dickie, Andrew Beyer, Peter Day, Frank Greer

Abstract: This study presents a comprehensive investigation into the exceptional superconducting attributes of titanium nitride (TiN) achieved through plasma-enhanced atomic layer deposition (PEALD) on both planar and intricate three-dimensional (3D) structures. We introduced an additional substrate biasing cycle to densify the film and remove ligand residues, augmenting the properties while minimizing impu… ▽ More This study presents a comprehensive investigation into the exceptional superconducting attributes of titanium nitride (TiN) achieved through plasma-enhanced atomic layer deposition (PEALD) on both planar and intricate three-dimensional (3D) structures. We introduced an additional substrate biasing cycle to densify the film and remove ligand residues, augmenting the properties while minimizing impurities. While reactive-sputtered TiN films exhibit high quality, our technique ensures superior uniformity by consistently maintaining a desired sheet resistance greater than 95 percent across a 6inch wafer, a critical aspect for fabricating extensive arrays of superconducting devices and optimizing wafer yield. Moreover, our films demonstrate exceptional similarity to conventional reactive-sputtered films, consistently reaching a critical temperature (Tc) of 4.35 K with a thickness of around 40 nm. This marks a notable achievement compared to previously reported ALD-based superconducting TiN. Using the same process as for planar films, we obtained Tc for aspect ratios (ARs) ranging from 2 to 40, observing a Tc of approximately 2 K for ARs between 2 and 10.5. We elucidate the mechanisms contributing to the limitations and degradation of superconducting properties over these aggressive 3D structures. Our results seamlessly align with both current and next-generation superconducting technologies, meeting stringent criteria for thin-film constraints, large-scale deposition, conformality, 3D integration schemes, and yield optimization. △ Less

Submitted 15 December, 2023; originally announced December 2023.

Occupancy Detection Based on Electricity Consumption

Authors: Thomas Brilland, Guillaume Matheron, Laetitia Leduc, Yukihide Nakada

Abstract: This article presents a new methodology for extracting intervals when a home is vacant from low-frequency electricity consumption data. The approach combines multiple algorithms, including change point detection, classification, period detection, and periodic spikes retrieval. It shows encouraging results on both simulated and real consumption curves. This approach offers practical insights for op… ▽ More This article presents a new methodology for extracting intervals when a home is vacant from low-frequency electricity consumption data. The approach combines multiple algorithms, including change point detection, classification, period detection, and periodic spikes retrieval. It shows encouraging results on both simulated and real consumption curves. This approach offers practical insights for optimizing energy use and holds potential benefits for residential consumers and utility companies in terms of energy cost reduction and sustainability. Further research is needed to enhance its applicability in diverse settings and with larger datasets. △ Less

Submitted 13 December, 2023; originally announced December 2023.

Comments: Comments welcome!

MSC Class: 94A12 (Primary) 94A13 (Secondary)

Experimental apparatus for non-contact resistivity measurements of the rock core plug based on magnetic induction

Authors: Pablo Diniz Batista, Leduc Hermeto de Almeida Fauth, Bernardo Coutinho Camilo dos Santos, Willian Andrighetto Trevizan, Maury Duarte Correia, Jorlandio Francisco Felix

Abstract: A new apparatus has been developed to measure the conductivity of rock samples. The probe, which consists of multi-coil transmitters and receivers doesn't require physical contact with the samples. The measurement is based on the induction principle. The measurement system is validated by using saline solutions and water-saturated sands of known conductivity. This work presents details of the deve… ▽ More A new apparatus has been developed to measure the conductivity of rock samples. The probe, which consists of multi-coil transmitters and receivers doesn't require physical contact with the samples. The measurement is based on the induction principle. The measurement system is validated by using saline solutions and water-saturated sands of known conductivity. This work presents details of the development of a system of magnetic resistivity measurements by magnetic induction for petrophysical applications. The first application consists of measuring the resistivity of the core plug which is 0.038 m in diameter. Currently the system is operating properly at a frequency of 50 kHz with a current of up to 500 mA at 20 °C. During the study two types of samples were investigated: aqueous solutions with conductivities between 1 to 100 mS/cm and rocks. Several tests were carried out with the objective of investigating the performance of the instrument, such as the experiment to obtain sensitivity for the measurement system as a function of the current applied to the transmitter coil. △ Less

Submitted 3 December, 2023; originally announced December 2023.

Comments: 14 pages, 5 figures

Modeling of cosmic rays and near-IR photons in aluminum KIDs

Authors: Elijah Kane, Chris Albert, Ritoban Basu Thakur, Charles, Bradford, Nicholas Cothard, Peter Day, Logan Foote, Steven Hailey-Dunsheath, Reinier Janssen, Henry, LeDuc, Lun-Jun, Liu, Hien Nguyen, Jonas Zmuidzinas

Abstract: The PRobe far-Infrared Mission for Astrophysics (PRIMA) is working to develop kinetic inductance detectors (KIDs) that can meet the sensitivity targets of a far-infrared spectrometer on a cryogenically cooled space telescope. An important ingredient for achieving high sensitivity is increasing the fractional-frequency responsivity. Here we present a study of the responsivity of aluminum KIDs fabri… ▽ More The PRobe far-Infrared Mission for Astrophysics (PRIMA) is working to develop kinetic inductance detectors (KIDs) that can meet the sensitivity targets of a far-infrared spectrometer on a cryogenically cooled space telescope. An important ingredient for achieving high sensitivity is increasing the fractional-frequency responsivity. Here we present a study of the responsivity of aluminum KIDs fabricated at the Jet Propulsion Laboratory. Specifically, we model the KID's temporal response to pair-breaking excitations in the framework of the Mattis-Bardeen theory, incorporating quasiparticle recombination dynamics and the pair-breaking efficiency. Using a near-IR laser, we measure time-resolved photon pulses and fit them to our model, extracting the time-resolved quasiparticle density and the quasiparticle recombination lifetime. Comparing the fit to the known energy of the laser provides a measurement of the pair-breaking efficiency. In addition to photon-sourced excitations, it is important to understand the KID's response to phonon-sourced excitations from cosmic rays. We measure the rate of secondary cosmic rays detected by our devices, and predict the dead time due to cosmic rays for an array in L2 orbit. This work provides confidence in KIDs' robustness to cosmic ray events in the space environment. △ Less

Submitted 8 November, 2023; originally announced November 2023.

Comments: 8 pages, 4 figures

Characterization of a Far-Infrared Kinetic Inductance Detector Prototype for PRIMA

Authors: Steven Hailey-Dunsheath, Sven van Berkel, Andrew E. Beyer, Logan Foote, Reinier M. J. Janssen, Henry G. LeDuc, Pierre M. Echternach, Charles M. Bradford, Jochem J. A. Baselmans, Shahab Dabironezare, Peter K. Day, Nicholas F. Cothard, Jason Glenn

Abstract: The PRobe far-Infrared Mission for Astrophysics (PRIMA) is under study as a potential far-IR space mission, featuring actively cooled optics, and both imaging and spectroscopic instrumentation. To fully take advantage of the low background afforded by a cold telescope, spectroscopy with PRIMA requires detectors with a noise equivalent power (NEP) better than $1 \times 10^{-19}$ W Hz$^{-1/2}$. To m… ▽ More The PRobe far-Infrared Mission for Astrophysics (PRIMA) is under study as a potential far-IR space mission, featuring actively cooled optics, and both imaging and spectroscopic instrumentation. To fully take advantage of the low background afforded by a cold telescope, spectroscopy with PRIMA requires detectors with a noise equivalent power (NEP) better than $1 \times 10^{-19}$ W Hz$^{-1/2}$. To meet this goal we are develo** large format arrays of kinetic inductance detectors (KIDs) to work across the $25-250$ micron range. Here we present the design and characterization of a single pixel prototype detector optimized for $210$ micron. The KID consists of a lens-coupled aluminum inductor-absorber connected to a niobium interdigitated capacitor to form a 2 GHz resonator. We have fabricated a small array with 28 KIDs, and we measure the performance of one of these detectors with an optical loading in the $0.01 - 300$ aW range. At low loading the detector achieves an NEP of $9\times10^{-20}$ W Hz$^{-1/2}$ at a 10 Hz readout frequency, and the lens-absorber system achieves a good optical efficiency. An extrapolation of these measurements suggest this detector may remain photon noise limited at up to 20 fW of loading, offering a high dynamic range for PRIMA observations of bright astronomical sources. △ Less

Submitted 17 April, 2024; v1 submitted 6 November, 2023; originally announced November 2023.

Comments: revised submission to IEEE Transactions on Terahertz Science and Technology

High-sensitivity Kinetic Inductance Detector Arrays for the Probe Far-Infrared Mission for Astrophysics

Authors: Logan Foote, Chris Albert, Jochem Baselmans, Andrew Beyer, Nicholas Cothard, Peter Day, Steven Hailey-Dunsheath, Pierre Echternach, Reinier Janssen, Elijah Kane, Henry Leduc, Lun-Jun Liu, Hien Nguyen, Joanna Perido, Jason Glenn, Jonas Zmuidzinas, Charles, Bradford

Abstract: Far-infrared (far-IR) astrophysics missions featuring actively cooled telescopes will offer orders of magnitude observing speed improvement at wavelengths where galaxies and forming planetary systems emit most of their light. The PRobe far-Infrared Mission for Astrophysics (PRIMA), which is currently under study, emphasizes low and moderate resolution spectroscopy throughout the far-IR. Full utili… ▽ More Far-infrared (far-IR) astrophysics missions featuring actively cooled telescopes will offer orders of magnitude observing speed improvement at wavelengths where galaxies and forming planetary systems emit most of their light. The PRobe far-Infrared Mission for Astrophysics (PRIMA), which is currently under study, emphasizes low and moderate resolution spectroscopy throughout the far-IR. Full utilization of PRIMA's cold telescope requires far-IR detector arrays with per-pixel noise equivalent powers (NEPs) at or below 1 x 10-19 W/rtHz. We are develo** low-volume Aluminum kinetic inductance detector (KID) arrays to reach these sensitivities. We will present on the development of our long-wavelength (210 um) array approach, with a focus on multitone measurements of our 1,008-pixel arrays. We measure an NEP below 1 x 10-19 W/rtHz for 73 percent of our pixels. △ Less

Submitted 29 May, 2024; v1 submitted 3 November, 2023; originally announced November 2023.

Comments: 9 pages, 5 figures, 20th International Workshop on Low Temperature Detectors, submitted to the Journal of Low Temperature Physics

Parallel Plate Capacitor Aluminum KIDs for Future Far-Infrared Space-Based Observatories

Authors: Nicholas F. Cothard, Christopher Albert, Andrew D. Beyer, Charles M. Bradford, Pierre Echternach, Byeong-Ho Eom, Logan Foote, Marc Foote, Steven Hailey-Dunsheath, Reinier M. J. Janssen, Elijah Kane, Henry LeDuc, Joanna Perido, Jason Glenn, Peter K. Day

Abstract: Future space-based far-infrared astrophysical observatories will require exquis-itely sensitive detectors consistent with the low optical backgrounds. The PRobe far-Infrared Mission for Astrophysics (PRIMA) will deploy arrays of thousands of superconducting kinetic inductance detectors (KIDs) sensitive to radiation between 25 and 265 $μ$m. Here, we present laboratory characterization of prototype,… ▽ More Future space-based far-infrared astrophysical observatories will require exquis-itely sensitive detectors consistent with the low optical backgrounds. The PRobe far-Infrared Mission for Astrophysics (PRIMA) will deploy arrays of thousands of superconducting kinetic inductance detectors (KIDs) sensitive to radiation between 25 and 265 $μ$m. Here, we present laboratory characterization of prototype, 25 -- 80 $μ$m wavelength, low-volume, aluminum KIDs designed for the low-background environment expected with PRIMA. A compact parallel plate capacitor is used to minimize the detector footprint and suppress TLS noise. A novel resonant absorber is designed to enhance response in the band of interest. We present noise and optical efficiency measurements of these detectors taken with a low-background cryostat and a cryogenic blackbody. A microlens-hybridized KID array is found to be photon noise limited down to about 50 aW with a limiting detector NEP of about $6.5 \times 10^{-19}~\textrm{W/Hz}^{1/2}$. A fit to an NEP model shows that our optical system is well characterized and understood down to 50 aW. We discuss future plans for low-volume aluminum KID array development as well as the testbeds used for these measurements. △ Less

Submitted 1 November, 2023; originally announced November 2023.

Comments: 8 pages, 4 figures, 20th International Workshop on Low Temperature Detectors, submitted to the Journal of Low Temperature Physics

Modeling and interpretation of single-cell proteogenomic data

Authors: Andrew Leduc, Hannah Harens, Nikolai Slavov

Abstract: Biological functions stem from coordinated interactions among proteins, nucleic acids and small molecules. Mass spectrometry technologies for reliable, high throughput single-cell proteomics will add a new modality to genomics and enable data-driven modeling of the molecular mechanisms coordinating proteins and nucleic acids at single-cell resolution. This promising potential requires estimating t… ▽ More Biological functions stem from coordinated interactions among proteins, nucleic acids and small molecules. Mass spectrometry technologies for reliable, high throughput single-cell proteomics will add a new modality to genomics and enable data-driven modeling of the molecular mechanisms coordinating proteins and nucleic acids at single-cell resolution. This promising potential requires estimating the reliability of measurements and computational analysis so that models can distinguish biological regulation from technical artifacts. We highlight different measurement modes that can support single-cell proteogenomic analysis and how to estimate their reliability. We then discuss approaches for develo** both abstract and mechanistic models that aim to biologically interpret the measured differences across modalities, including specific applications to directed stem cell differentiation and to inferring protein interactions in cancer cells from the buffing of DNA copy-number variations. Single-cell proteogenomic data will support mechanistic models of direct molecular interactions that will provide generalizable and predictive representations of biological systems. △ Less

Submitted 4 November, 2023; v1 submitted 14 August, 2023; originally announced August 2023.

Demonstration of a Quantum Noise Limited Traveling-Wave Parametric Amplifier

Authors: Nikita Klimovich, Peter Day, Shibo Shu, Byeong Ho Eom, Henry Leduc, Andrew Beyer

Abstract: Recent progress in quantum computing and the development of novel detector technologies for astrophysics is driving the need for high-gain, broadband, and quantum-limited amplifiers. We present a purely traveling-wave parametric amplifier (TWPA) using an inverted NbTiN microstrip and amorphous Silicon dielectric. Through dispersion engineering, we are able to obtain $50~Ω$ impedance matching and s… ▽ More Recent progress in quantum computing and the development of novel detector technologies for astrophysics is driving the need for high-gain, broadband, and quantum-limited amplifiers. We present a purely traveling-wave parametric amplifier (TWPA) using an inverted NbTiN microstrip and amorphous Silicon dielectric. Through dispersion engineering, we are able to obtain $50~Ω$ impedance matching and suppress undesired parametric processes while phase matching the three-wave-mixing amplification across a large range of frequencies. The result is a broadband amplifier operating with 20 dB gain and quantum-limited noise performance at 20 mK. At the single frequency where the amplifier is phase sensitive, we further demonstrate 8 dB of vacuum noise squeezing. △ Less

Submitted 23 June, 2023; v1 submitted 19 June, 2023; originally announced June 2023.

Measurement of the effects of rough surfaces on Lamb waves propagation

Authors: Damien Leduc, Bruno Morvan, Pascal Pareige, Jean-Louis Izbicki

Abstract: This work deals with the sensitivity to the plate roughness of Lamb waves. An experimental study is performed involving an air-coupling transducer system. Signal processing allows us to extract the Lamb waves characteristics: phase velocity and attenuation. Plate surface topographies are obtained by means of an optical surface profiler. The acoustic characteristics and the surface topographies are… ▽ More This work deals with the sensitivity to the plate roughness of Lamb waves. An experimental study is performed involving an air-coupling transducer system. Signal processing allows us to extract the Lamb waves characteristics: phase velocity and attenuation. Plate surface topographies are obtained by means of an optical surface profiler. The acoustic characteristics and the surface topographies are finally linked. △ Less

Submitted 19 April, 2023; originally announced April 2023.

Journal ref: NDT & E International, 2004, 37, pp.207 - 211

Corporate Culture and Organizational Fragility

Authors: Matthew Elliott, Benjamin Golub, Matthieu V. Leduc

Abstract: Complex organizations accomplish tasks through many steps of collaboration among workers. Corporate culture supports collaborations by establishing norms and reducing misunderstandings. Because a strong corporate culture relies on costly, voluntary investments by many workers, we model it as an organizational public good, subject to standard free-riding problems, which become severe in large organ… ▽ More Complex organizations accomplish tasks through many steps of collaboration among workers. Corporate culture supports collaborations by establishing norms and reducing misunderstandings. Because a strong corporate culture relies on costly, voluntary investments by many workers, we model it as an organizational public good, subject to standard free-riding problems, which become severe in large organizations. Our main finding is that voluntary contributions to culture can nevertheless be sustained, because an organization's equilibrium productivity is endogenously highly sensitive to individual contributions. However, the completion of complex tasks is then necessarily fragile to small shocks that damage the organization's culture. △ Less

Submitted 21 January, 2023; originally announced January 2023.

Wideband Direct Detection Constraints on Hidden Photon Dark Matter with the QUALIPHIDE Experiment

Authors: Karthik Ramanathan, Nikita Klimovich, Ritoban Basu Thakur, Byeong Ho Eom, Henry G. LeDuc, Shibo Shu, Andrew D. Beyer, Peter K. Day

Abstract: We report direction detection constraints on the presence of hidden photon dark matter with masses between 20-30 ueV using a cryogenic emitter-receiver-amplifier spectroscopy setup designed as the first iteration of QUALIPHIDE (QUantum LImited PHotons In the Dark Experiment). A metallic dish sources conversion photons from hidden photon kinetic mixing onto a horn antenna which is coupled to a C-ba… ▽ More We report direction detection constraints on the presence of hidden photon dark matter with masses between 20-30 ueV using a cryogenic emitter-receiver-amplifier spectroscopy setup designed as the first iteration of QUALIPHIDE (QUantum LImited PHotons In the Dark Experiment). A metallic dish sources conversion photons from hidden photon kinetic mixing onto a horn antenna which is coupled to a C-band kinetic inductance traveling wave parametric amplifier, providing for near quantum-limited noise performance. We demonstrate a first probing of the kinetic mixing parameter "chi" to just above 10^-12 for the majority of hidden photon masses in this region. These results not only represent stringent constraints on new dark matter parameter space but are also the first demonstrated use of wideband quantum-limited amplification for astroparticle applications △ Less

Submitted 7 September, 2022; originally announced September 2022.

Comments: 6 Pages, 5 figures,

Models of Vimentin Organization Under Actin-Driven Transport

Authors: Youngmin Park, Cécile Leduc, Sandrine Etienne-Manneville, Stéphanie Portet

Abstract: Intermediate filaments form an essential structural network, spread throughout the cytoplasm and play a key role in cell mechanics, intracellular organization and molecular signaling. The maintenance of the network and its adaptation to the cell's dynamic behavior relies on several mechanisms implicating cytoskeletal crosstalk which are not fully understood. Mathematical modeling allows us to comp… ▽ More Intermediate filaments form an essential structural network, spread throughout the cytoplasm and play a key role in cell mechanics, intracellular organization and molecular signaling. The maintenance of the network and its adaptation to the cell's dynamic behavior relies on several mechanisms implicating cytoskeletal crosstalk which are not fully understood. Mathematical modeling allows us to compare several biologically realistic scenarios to help us interpret experimental data. In this study, we observe and model the dynamics of the vimentin intermediate filaments in single glial cells seeded on circular micropatterns following microtubule disruption by nocodazole treatment. In these conditions, the vimentin filaments move towards the cell center and accumulate before eventually reaching a steady-state. In absence of microtubule-driven transport, the motion of the vimentin network is primarily driven by actin-related mechanisms. To model these experimental findings, we hypothesize that vimentin may exist in two states, mobile and immobile, and switches between the states at unknown (either constant or non-constant) rates. Mobile vimentin are assumed to advect with either constant or non-constant velocity. We introduce several biologically realistic scenarios using this set of assumptions. For each scenario, we use differential evolution to find the best parameter sets resulting in a solution that most closely matches the experimental data, then the assumptions are evaluated using the Akaike Information Criterion. This modeling approach allows us to conclude that our experimental data are best explained by a spatially dependent trap** of intermediate filaments or a spatially dependent speed of actin-dependent transport. △ Less

Submitted 12 April, 2023; v1 submitted 6 September, 2022; originally announced September 2022.

Comments: 25 pages, 8 figures

MSC Class: 92C37

Strong kinetic-inductance Kerr nonlinearity with titanium nitride nanowires

Authors: Chaitali Joshi, Wenyuan Chen, Henry G. LeDuc, Peter K. Day, Mohammad Mirhosseini

Abstract: Thin films of disordered superconductors such as titanium nitride (TiN) exhibit large kinetic inductance (KI), high critical temperature, and large quality factors at the single-photon level. KI nonlinearity can be exploited as an alternative to Josephson junctions for creating novel nonlinear quantum devices with the potential to operate at higher frequencies and at elevated temperatures. We stud… ▽ More Thin films of disordered superconductors such as titanium nitride (TiN) exhibit large kinetic inductance (KI), high critical temperature, and large quality factors at the single-photon level. KI nonlinearity can be exploited as an alternative to Josephson junctions for creating novel nonlinear quantum devices with the potential to operate at higher frequencies and at elevated temperatures. We study a means of magnifying KI nonlinearity by confining the current density of resonant electromagnetic modes in nanowires with a small volume $V \simeq 10^{-4}\text{um}^3$. Using this concept, we realize microwave-frequency Kerr cavities with a maximum Kerr-shift per photon of $K/2π= 123.5 \pm 3$ kHz and report a nonlinearity-to-linewidth ratio $K/γ= 21\%$. With improved design, our devices are expected to approach the regime of strong quantum nonlinearity in the millimeter-wave spectrum. △ Less

Submitted 30 July, 2022; originally announced August 2022.

A quantum electromechanical interface for long-lived phonons

Authors: Alkim Bozkurt, Han Zhao, Chaitali Joshi, Henry G. LeDuc, Peter K. Day, Mohammad Mirhosseini

Abstract: Controlling long-lived mechanical oscillators in the quantum regime holds promises for quantum information processing. Here, we present an electromechanical system capable of operating in the GHz-frequency band in a silicon-on-insulator platform. Relying on a novel driving scheme based on an electrostatic field and high-impedance microwave cavities based on TiN superinductors, we are able to demon… ▽ More Controlling long-lived mechanical oscillators in the quantum regime holds promises for quantum information processing. Here, we present an electromechanical system capable of operating in the GHz-frequency band in a silicon-on-insulator platform. Relying on a novel driving scheme based on an electrostatic field and high-impedance microwave cavities based on TiN superinductors, we are able to demonstrate a parametrically-enhanced electromechanical coupling of ${g/2 π} = 1.1$ MHz, sufficient to enter the strong-coupling regime with a cooperativity of $\mathcal{C} = 1200$. The absence of piezoelectric materials in our platform leads to long mechanical lifetimes, finding intrinsic values up to $τ_\text{d} = 265~ μ$s ($Q = 8.4 \times {10}^6$ at $ω_\mathrm{m}/2π= 5$ GHz) measured at low-phonon numbers and millikelvin temperatures. Despite the strong parametric drives, we find the cavity-mechanics system in the quantum ground state by performing sideband thermometry measurements. Simultaneously achieving ground-state operation, long mechanical lifetimes, and strong coupling sets the stage for employing silicon electromechanical resonators as memory elements and transducers in hybrid quantum systems, and as a tool for probing the origins of acoustic loss in the quantum regime. △ Less

Submitted 22 July, 2022; originally announced July 2022.

Initial recommendations for performing, benchmarking, and reporting single-cell proteomics experiments

Authors: Laurent Gatto, Ruedi Aebersold, Juergen Cox, Vadim Demichev, Jason Derks, Edward Emmott, Alexander M. Franks, Alexander R. Ivanov, Ryan T. Kelly, Luke Khoury, Andrew Leduc, Michael J. MacCoss, Peter Nemes, David H. Perlman, Aleksandra A. Petelski, Christopher M. Rose, Erwin M. Schoof, Jennifer Van Eyk, Christophe Vanderaa, John R. Yates III, Nikolai Slavov

Abstract: Analyzing proteins from single cells by tandem mass spectrometry (MS) has become technically feasible. While such analysis has the potential to accurately quantify thousands of proteins across thousands of single cells, the accuracy and reproducibility of the results may be undermined by numerous factors affecting experimental design, sample preparation, data acquisition, and data analysis. Broadl… ▽ More Analyzing proteins from single cells by tandem mass spectrometry (MS) has become technically feasible. While such analysis has the potential to accurately quantify thousands of proteins across thousands of single cells, the accuracy and reproducibility of the results may be undermined by numerous factors affecting experimental design, sample preparation, data acquisition, and data analysis. Broadly accepted community guidelines and standardized metrics will enhance rigor, data quality, and alignment between laboratories. Here we propose best practices, quality controls, and data reporting recommendations to assist in the broad adoption of reliable quantitative workflows for single-cell proteomics. △ Less

Submitted 12 September, 2022; v1 submitted 19 July, 2022; originally announced July 2022.

Comments: Supporting website: https://single-cell.net/guidelines

Journal ref: Nature Methods, 20, 375--386 (2023)

Searching for broadband pulsed beacons from 1883 stars using neural networks

Authors: Vishal Gajjar, Dominic LeDuc, Jiani Chen, Andrew P. V. Siemion, Sofia Z. Sheikh, Bryan Brzycki, Steve Croft, Daniel Czech, David DeBoer, Julia DeMarines, Jamie Drew, Howard Isaacson, Brian C. Lacki, Matt Lebofsky, David H. E. MacMahon, Cherry Ng, Imke de Pater, Karen I. Perez, Danny C. Price, Akshay Suresh, Claire Webb, S. Pete Worden

Abstract: The search for extraterrestrial intelligence at radio frequencies has largely been focused on continuous-wave narrowband signals. We demonstrate that broadband pulsed beacons are energetically efficient compared to narrowband beacons over longer operational timescales. Here, we report the first extensive survey searching for such broadband pulsed beacons towards 1883 stars as a part of the Breakth… ▽ More The search for extraterrestrial intelligence at radio frequencies has largely been focused on continuous-wave narrowband signals. We demonstrate that broadband pulsed beacons are energetically efficient compared to narrowband beacons over longer operational timescales. Here, we report the first extensive survey searching for such broadband pulsed beacons towards 1883 stars as a part of the Breakthrough Listen's search for advanced intelligent life. We conducted 233 hours of deep observations across 4 to 8 GHz using the Robert C. Byrd Green Bank Telescope and searched for three different classes of signals with artificial (or negative) dispersion. We report a detailed search -- leveraging a convolutional neural network classifier on high-performance GPUs -- deployed for the very first time in a large-scale search for signals from extraterrestrial intelligence. Due to the absence of any signal-of-interest from our survey, we place a constraint on the existence of broadband pulsed beacons in our solar neighborhood: $\lesssim$1 in 1000 stars have transmitter power-densities $\gtrsim$10$^5$ W/Hz repeating $\leq$500 seconds at these frequencies. △ Less

Submitted 5 May, 2022; originally announced May 2022.

Comments: Accepted for publication in ApJ

Generative Modeling of Complex Data

Authors: Luca Canale, Nicolas Grislain, Grégoire Lothe, Johan Leduc

Abstract: In recent years, several models have improved the capacity to generate synthetic tabular datasets. However, such models focus on synthesizing simple columnar tables and are not useable on real-life data with complex structures. This paper puts forward a generic framework to synthesize more complex data structures with composite and nested types. It then proposes one practical implementation, built… ▽ More In recent years, several models have improved the capacity to generate synthetic tabular datasets. However, such models focus on synthesizing simple columnar tables and are not useable on real-life data with complex structures. This paper puts forward a generic framework to synthesize more complex data structures with composite and nested types. It then proposes one practical implementation, built with causal transformers, for struct (map**s of types) and lists (repeated instances of a type). The results on standard benchmark datasets show that such implementation consistently outperforms current state-of-the-art models both in terms of machine learning utility and statistical similarity. Moreover, it shows very strong results on two complex hierarchical datasets with multiple nesting and sparse data, that were previously out of reach. △ Less

Submitted 4 February, 2022; originally announced February 2022.

Using Language Model to Bootstrap Human Activity Recognition Ambient Sensors Based in Smart Homes

Authors: Damien Bouchabou, Sao Mai Nguyen, Christophe Lohr, Benoit Leduc, Ioannis Kanellos

Abstract: Long Short Term Memory LSTM-based structures have demonstrated their efficiency for daily living recognition activities in smart homes by capturing the order of sensor activations and their temporal dependencies. Nevertheless, they still fail in dealing with the semantics and the context of the sensors. More than isolated id and their ordered activation values, sensors also carry meaning. Indeed,… ▽ More Long Short Term Memory LSTM-based structures have demonstrated their efficiency for daily living recognition activities in smart homes by capturing the order of sensor activations and their temporal dependencies. Nevertheless, they still fail in dealing with the semantics and the context of the sensors. More than isolated id and their ordered activation values, sensors also carry meaning. Indeed, their nature and type of activation can translate various activities. Their logs are correlated with each other, creating a global context. We propose to use and compare two Natural Language Processing embedding methods to enhance LSTM-based structures in activity-sequences classification tasks: Word2Vec, a static semantic embedding, and ELMo, a contextualized embedding. Results, on real smart homes datasets, indicate that this approach provides useful information, such as a sensor organization map, and makes less confusion between daily activity classes. It helps to better perform on datasets with competing activities of other residents or pets. Our tests show also that the embeddings can be pretrained on different datasets than the target one, enabling transfer learning. We thus demonstrate that taking into account the context of the sensors and their semantics increases the classification performances and enables transfer learning. △ Less

Submitted 23 November, 2021; originally announced November 2021.

ACM Class: I.5.4; I.2

Journal ref: Electronics, MDPI, 2021, 10 (20), pp.2498

A Survey of Human Activity Recognition in Smart Homes Based on IoT Sensors Algorithms: Taxonomies, Challenges, and Opportunities with Deep Learning

Authors: Damien Bouchabou, Sao Mai Nguyen, Christophe Lohr, Benoit Leduc, Ioannis Kanellos

Abstract: Recent advances in Internet of Things (IoT) technologies and the reduction in the cost of sensors have encouraged the development of smart environments, such as smart homes. Smart homes can offer home assistance services to improve the quality of life, autonomy and health of their residents, especially for the elderly and dependent. To provide such services, a smart home must be able to understand… ▽ More Recent advances in Internet of Things (IoT) technologies and the reduction in the cost of sensors have encouraged the development of smart environments, such as smart homes. Smart homes can offer home assistance services to improve the quality of life, autonomy and health of their residents, especially for the elderly and dependent. To provide such services, a smart home must be able to understand the daily activities of its residents. Techniques for recognizing human activity in smart homes are advancing daily. But new challenges are emerging every day. In this paper, we present recent algorithms, works, challenges and taxonomy of the field of human activity recognition in a smart home through ambient sensors. Moreover, since activity recognition in smart homes is a young field, we raise specific problems, missing and needed contributions. But also propose directions, research opportunities and solutions to accelerate advances in this field. △ Less

Submitted 18 October, 2021; originally announced November 2021.

Journal ref: Sensors, MDPI, 2021, 21

Proteomics Standards Initiatives ProForma 2.0 Unifying the encoding of Proteoforms and Peptidoforms

Authors: Richard D. LeDuc, Eric W. Deutsch, Pierre-Alain Binz, Ryan T. Fellers, Anthony J. Cesnik, Joshua A. Klein, Tim Van Den Bossche, Ralf Gabriels, Arshika Yalavarthi, Yasset Perez-Riverol, Jeremy Carver, Wout Bittremieux, Shin Kawano, Benjamin Pullman, Nuno Bandeira, Neil L. Kelleher, Paul M. Thomas, Juan Antonio Vizcaíno

Abstract: There is the need to represent in a standard manner all the possible variations of a protein or peptide primary sequence, including both artefactual and post-translational modifications of peptides and proteins. With that overall aim, here, the Human Proteome Organization (HUPO) Proteomics Standards Initiative (PSI) has developed a notation, called ProForma 2.0, which is a substantial extension of… ▽ More There is the need to represent in a standard manner all the possible variations of a protein or peptide primary sequence, including both artefactual and post-translational modifications of peptides and proteins. With that overall aim, here, the Human Proteome Organization (HUPO) Proteomics Standards Initiative (PSI) has developed a notation, called ProForma 2.0, which is a substantial extension of the original ProForma notation, developed by the Consortium for Top-Down Proteomics (CTDP). ProForma 2.0 aims to unify the representation of proteoforms and peptidoforms. Therefore, this notation supports use cases needed for bottom-up and middle/topdown proteomics approaches and allows the encoding of highly modified proteins and peptides using a human and machine-readable string. ProForma 2.0 covers encoding protein modification names and accessions, cross-linking reagents including disulfides, glycans, modifications encoded using mass shifts and/or via chemical formulas, labile and C or N-terminal modifications, ambiguity in the modification position and representation of atomic isotopes, among other use cases. Notational conventions are based on public controlled vocabularies and ontologies. Detailed information about the notation and existing implementations are available at http://www.psidev.info/proforma and at the corresponding GitHub repository (https://github.com/HUPO-PSI/proforma). △ Less

Submitted 21 March, 2022; v1 submitted 23 September, 2021; originally announced September 2021.

Nonlinearity and wideband parametric amplification in an NbTiN microstrip transmission line

Authors: Shibo Shu, Nikita Klimovich, Byeong Ho Eom, Andrew Beyer, Ritoban Basu Thakur, Henry Leduc, Peter Day

Abstract: The nonlinear response associated with the current dependence of the superconducting kinetic inductance was studied in capacitively shunted NbTiN microstrip transmission lines. It was found that the inductance per unit length of one microstrip line could be changed by up to 20% by applying a DC current, corresponding to a single pass time delay of 0.7 ns. To investigate nonlinear dissipation, Brag… ▽ More The nonlinear response associated with the current dependence of the superconducting kinetic inductance was studied in capacitively shunted NbTiN microstrip transmission lines. It was found that the inductance per unit length of one microstrip line could be changed by up to 20% by applying a DC current, corresponding to a single pass time delay of 0.7 ns. To investigate nonlinear dissipation, Bragg reflectors were placed on either end of a section of this type of transmission line, creating resonances over a range of frequencies. From the change in the resonance linewidth and amplitude with DC current, the ratio of the reactive to the dissipative response of the line was found to be 788. The low dissipation makes these transmission lines suitable for a number of applications that are microwave and millimeter-wave band analogues of nonlinear optical processes. As an example, by applying a millimeter-wave pump tone, very wide band parametric amplification was observed between about 3 and 34 GHz. Use as a current variable delay line for an on-chip millimeter-wave Fourier transform spectrometer is also considered. △ Less

Submitted 19 May, 2021; v1 submitted 28 February, 2021; originally announced March 2021.

Comments: 8 pages, 8 figures, accepted by Physical Review Research

Journal ref: Phys. Rev. Research 3, 023184 (2021)

Composable Generative Models

Authors: Johan Leduc, Nicolas Grislain

Abstract: Generative modeling has recently seen many exciting developments with the advent of deep generative architectures such as Variational Auto-Encoders (VAE) or Generative Adversarial Networks (GAN). The ability to draw synthetic i.i.d. observations with the same joint probability distribution as a given dataset has a wide range of applications including representation learning, compression or imputat… ▽ More Generative modeling has recently seen many exciting developments with the advent of deep generative architectures such as Variational Auto-Encoders (VAE) or Generative Adversarial Networks (GAN). The ability to draw synthetic i.i.d. observations with the same joint probability distribution as a given dataset has a wide range of applications including representation learning, compression or imputation. It appears that it also has many applications in privacy preserving data analysis, especially when used in conjunction with differential privacy techniques. This paper focuses on synthetic data generation models with privacy preserving applications in mind. It introduces a novel architecture, the Composable Generative Model (CGM) that is state-of-the-art in tabular data generation. Any conditional generative model can be used as a sub-component of the CGM, including CGMs themselves, allowing the generation of numerical, categorical data as well as images, text, or time series. The CGM has been evaluated on 13 datasets (6 standard datasets and 7 simulated) and compared to 14 recent generative models. It beats the state of the art in tabular data generation by a significant margin. △ Less

Submitted 18 February, 2021; originally announced February 2021.

Comments: 11 pages

Angular distribution measurement of atoms evaporated from a resistive oven applied to ion beam production

Authors: A. Leduc, T. Thuillier, L. Maunoury, O. Bajeat

Abstract: A low temperature oven has been developed to produce calcium beam with Electron Cyclotron Resonance Ion Source (ECRIS). The atom flux from the oven has been studied experimentally as a function of the temperature and the angle of emission by means of a quartz microbalance. The absolute flux measurement permitted to derive Antoine's coefficient for the calcium sample used : A=8.98$\pm$ 0.07 and B=7… ▽ More A low temperature oven has been developed to produce calcium beam with Electron Cyclotron Resonance Ion Source (ECRIS). The atom flux from the oven has been studied experimentally as a function of the temperature and the angle of emission by means of a quartz microbalance. The absolute flux measurement permitted to derive Antoine's coefficient for the calcium sample used : A=8.98$\pm$ 0.07 and B=7787$\pm$ 110 in standard unit. The angular FWHM of the atom flux distribution is found to be 53.7°$\pm$7.3 at 848K, temperature at which the gas behaviour is non collisional. The atom flux hysteresis observed experimentally in several laboratories is explained as follows: at first calcium heating, the evaporation comes from the sample only, resulting in a small evaporation rate. once a full calcium layer has formed on the crucible refractory wall, the calcium evaporation surface includes the crucible's enhancing dramatically the evaporation rate for a given temperature. A Monte-Carlo code, developed to reproduce and investigate the oven behaviour as a function of temperature is presented. A discussion on the gas regime in the oven is proposed as a function of its temperature. A fair agreement between experiment and simulation is found. △ Less

Submitted 4 February, 2021; v1 submitted 8 January, 2021; originally announced January 2021.

Comments: 16 pages, 11 figures

Improving the dynamic range of single photon counting kinetic inductance detectors

Authors: Nicholas Zobrist, Nikita Klimovich, Byeong Ho Eom, Grégoire Coiffard, Miguel Daal, Noah Swimmer, Sarah Steiger, Bruce Bumble, Henry G. LeDuc, Peter Day, Benjamin A. Mazin

Abstract: We develop a simple coordinate transformation which can be employed to compensate for the nonlinearity introduced by a Microwave Kinetic Inductance Detector's (MKID) homodyne readout scheme. This coordinate system is compared to the canonically used polar coordinates and is shown to improve the performance of the filtering method often used to estimate a photon's energy. For a detector where the c… ▽ More We develop a simple coordinate transformation which can be employed to compensate for the nonlinearity introduced by a Microwave Kinetic Inductance Detector's (MKID) homodyne readout scheme. This coordinate system is compared to the canonically used polar coordinates and is shown to improve the performance of the filtering method often used to estimate a photon's energy. For a detector where the coordinate nonlinearity is primarily responsible for limiting its resolving power, this technique leads to increased dynamic range, which we show by applying the transformation to data from a hafnium MKID designed to be sensitive to photons with wavelengths in the 800 to 1300 nm range. The new coordinates allow the detector to resolve photons with wavelengths down to 400 nm, raising the resolving power at that wavelength from 6.8 to 17. △ Less

Submitted 9 December, 2020; originally announced December 2020.

Fully Convolutional Network Bootstrapped by Word Encoding and Embedding for Activity Recognition in Smart Homes

Authors: Damien Bouchabou, Sao Nguyen, Christophe Lohr, Benoit Leduc, Ioannis Kanellos

Abstract: Activity recognition in smart homes is essential when we wish to propose automatic services for the inhabitants. However, it poses challenges in terms of variability of the environment, sensorimotor system, but also user habits. Therefore, endto-end systems fail at automatically extracting key features, without extensive pre-processing. We propose to tackle feature extraction for activity recognit… ▽ More Activity recognition in smart homes is essential when we wish to propose automatic services for the inhabitants. However, it poses challenges in terms of variability of the environment, sensorimotor system, but also user habits. Therefore, endto-end systems fail at automatically extracting key features, without extensive pre-processing. We propose to tackle feature extraction for activity recognition in smart homes by merging methods from the Natural Language Processing (NLP) and the Time Series Classification (TSC) domains. We evaluate the performance of our method on two datasets issued from the Center for Advanced Studies in Adaptive Systems (CASAS). Moreover, we analyze the contributions of the use of NLP encoding Bag-Of-Word with Embedding as well as the ability of the FCN algorithm to automatically extract features and classify. The method we propose shows good performance in offline activity classification. Our analysis also shows that FCN is a suitable algorithm for smart home activity recognition and hightlights the advantages of automatic feature extraction. △ Less

Submitted 1 December, 2020; originally announced December 2020.

Bayesian model of electrical heating disaggregation

Authors: François Culière, Laetitia Leduc, Alexander Belikov

Abstract: Adoption of smart meters is a major milestone on the path of European transition to smart energy. The residential sector in France represents $\approx$35\% of electricity consumption with $\approx$40\% (INSEE) of households using electrical heating. The number of deployed smart meters Linky is expected to reach 35M in 2021. In this manuscript we present an analysis of 676 households with an observ… ▽ More Adoption of smart meters is a major milestone on the path of European transition to smart energy. The residential sector in France represents $\approx$35\% of electricity consumption with $\approx$40\% (INSEE) of households using electrical heating. The number of deployed smart meters Linky is expected to reach 35M in 2021. In this manuscript we present an analysis of 676 households with an observation period of at least 6 months, for which we have metadata, such as the year of construction and the type of heating and propose a Bayesian model of the electrical consumption conditioned on temperature that allows to disaggregate the heating component from the electrical load curve in an unsupervised manner. In essence the model is a mixture of piece-wise linear models, characterised by a temperature threshold, below which we allow a mixture of two modes to represent the latent state home/away. △ Less

Submitted 11 November, 2020; originally announced November 2020.

Comments: 5th International Workshop on Non-Intrusive Load Monitoring (NILM 2020)

Geometric entanglement in integer quantum Hall states

Authors: Benoit Sirois, Lucie Maude Fournier, Julien Leduc, William Witczak-Krempa

Abstract: We study the quantum entanglement structure of integer quantum Hall states via the reduced density matrix of spatial subregions. In particular, we examine the eigenstates, spectrum and entanglement entropy (EE) of the density matrix for various ground and excited states, with or without mass anisotropy. We focus on an important class of regions that contain sharp corners or cusps, leading to a geo… ▽ More We study the quantum entanglement structure of integer quantum Hall states via the reduced density matrix of spatial subregions. In particular, we examine the eigenstates, spectrum and entanglement entropy (EE) of the density matrix for various ground and excited states, with or without mass anisotropy. We focus on an important class of regions that contain sharp corners or cusps, leading to a geometric angle-dependent contribution to the EE. We unravel surprising relations by comparing this corner term at different fillings. We further find that the corner term, when properly normalized, has nearly the same angle dependence as numerous conformal field theories (CFTs) in two spatial dimensions, which hints at a broader structure. In fact, the Hall corner term is found to obey bounds that were previously obtained for CFTs. In addition, the low-lying entanglement spectrum and the corresponding eigenfunctions reveal "excitations" localized near corners. Finally, we present an outlook for fractional quantum Hall states. △ Less

Submitted 4 September, 2020; originally announced September 2020.

Comments: 16+3 pages, 14+2 figures, 1+1 tables

Journal ref: Phys. Rev. B 103, 115115 (2021)

Steady Rayleigh--Bénard convection between stress-free boundaries

Authors: Baole Wen, David Goluskin, Matthew LeDuc, Gregory P. Chini, Charles R. Doering

Abstract: Steady two-dimensional Rayleigh--Bénard convection between stress-free isothermal boundaries is studied via numerical computations. We explore properties of steady convective rolls with aspect ratios $π/5\leΓ\le4π$, where $Γ$ is the width-to-height ratio for a pair of counter-rotating rolls, over eight orders of magnitude in the Rayleigh number, $10^3\le Ra\le10^{11}$, and four orders of magnitude… ▽ More Steady two-dimensional Rayleigh--Bénard convection between stress-free isothermal boundaries is studied via numerical computations. We explore properties of steady convective rolls with aspect ratios $π/5\leΓ\le4π$, where $Γ$ is the width-to-height ratio for a pair of counter-rotating rolls, over eight orders of magnitude in the Rayleigh number, $10^3\le Ra\le10^{11}$, and four orders of magnitude in the Prandtl number, $10^{-2}\le Pr\le10^2$. At large $Ra$ where steady rolls are dynamically unstable, the computed rolls display $Ra \rightarrow \infty$ asymptotic scaling. In this regime, the Nusselt number $Nu$ that measures heat transport scales as $Ra^{1/3}$ uniformly in $Pr$. The prefactor of this scaling depends on $Γ$ and is largest at $Γ\approx 1.9$. The Reynolds number $Re$ for large-$Ra$ rolls scales as $Pr^{-1} Ra^{2/3}$ with a prefactor that is largest at $Γ\approx 4.5$. All of these large-$Ra$ features agree quantitatively with the semi-analytical asymptotic solutions constructed by Chini \& Cox (2009). Convergence of $Nu$ and $Re$ to their asymptotic scalings occurs more slowly when $Pr$ is larger and when $Γ$ is smaller. △ Less

Submitted 23 October, 2020; v1 submitted 6 July, 2020; originally announced July 2020.

Journal ref: J. Fluid Mech. Rapids 905, R4 (2020)

Full-Array Noise Performance of Deployment-Grade SuperSpec mm-wave On-Chip Spectrometers

Authors: K. S. Karkare, P. S. Barry, C. M. Bradford, S. Chapman, S. Doyle, J. Glenn, S. Gordon, S. Hailey-Dunsheath, R. M. J. Janssen, A. Kovacs, H. G. LeDuc, P. Mauskopf, R. McGeehan, J. Redford, E. Shirokoff, C. Tucker, J. Wheeler, J. Zmuidzinas

Abstract: SuperSpec is an on-chip filter-bank spectrometer designed for wideband moderate-resolution spectroscopy at millimeter wavelengths, employing TiN kinetic inductance detectors. SuperSpec technology will enable large-format spectroscopic integral field units suitable for high-redshift line intensity map** and multi-object spectrographs. In previous results we have demonstrated noise performance in… ▽ More SuperSpec is an on-chip filter-bank spectrometer designed for wideband moderate-resolution spectroscopy at millimeter wavelengths, employing TiN kinetic inductance detectors. SuperSpec technology will enable large-format spectroscopic integral field units suitable for high-redshift line intensity map** and multi-object spectrographs. In previous results we have demonstrated noise performance in individual detectors suitable for photon noise limited ground-based observations at excellent mm-wave sites. In these proceedings we present the noise performance of a full $R\sim 275$ spectrometer measured using deployment-ready RF hardware and software. We report typical noise equivalent powers through the full device of $\sim 3 \times 10^{-16} \ \mathrm{W}/\sqrt{\mathrm{Hz}}$ at expected sky loadings, which are photon noise dominated. Based on these results, we plan to deploy a six-spectrometer demonstration instrument to the Large Millimeter Telescope in early 2020. △ Less

Submitted 11 February, 2020; originally announced February 2020.

Comments: 8 pages, 5 figures. Accepted by the Journal of Low Temperature Physics (Proceedings of the 18th International Workshop on Low Temperature Detectors)

Supply Network Formation and Fragility

Authors: Matthew Elliott, Benjamin Golub, Matthew V. Leduc

Abstract: We model the production of complex goods in a large supply network. Each firm sources several essential inputs through relationships with other firms. Individual supply relationships are at risk of idiosyncratic failure, which threatens to disrupt production. To protect against this, firms multisource inputs and strategically invest to make relationships stronger, trading off the cost of investmen… ▽ More We model the production of complex goods in a large supply network. Each firm sources several essential inputs through relationships with other firms. Individual supply relationships are at risk of idiosyncratic failure, which threatens to disrupt production. To protect against this, firms multisource inputs and strategically invest to make relationships stronger, trading off the cost of investment against the benefits of increased robustness. A supply network is called fragile if aggregate output is very sensitive to small aggregate shocks. We show that supply networks of intermediate productivity are fragile in equilibrium, even though this is always inefficient. The endogenous configuration of supply networks provides a new channel for the powerful amplification of shocks. △ Less

Submitted 26 February, 2023; v1 submitted 12 January, 2020; originally announced January 2020.

Wide-band Parametric Amplifier Readout and Resolution of Optical Microwave Kinetic Inductance Detectors

Authors: Nicholas Zobrist, Byeong Ho Eom, Peter Day, Benjamin A. Mazin, Seth R. Meeker, Bruce Bumble, Henry G. LeDuc, Gérgoire Coiffard, Paul Szypryt, Neelay Fruitwala, Isabel Lipartito, Clint Bockstiegel

Abstract: The energy resolution of a single photon counting Microwave Kinetic Inductance Detector (MKID) can be degraded by noise coming from the primary low temperature amplifier in the detector's readout system. Until recently, quantum limited amplifiers have been incompatible with these detectors due to dynamic range, power, and bandwidth constraints. However, we show that a kinetic inductance based trav… ▽ More The energy resolution of a single photon counting Microwave Kinetic Inductance Detector (MKID) can be degraded by noise coming from the primary low temperature amplifier in the detector's readout system. Until recently, quantum limited amplifiers have been incompatible with these detectors due to dynamic range, power, and bandwidth constraints. However, we show that a kinetic inductance based traveling wave parametric amplifier can be used for this application and reaches the quantum limit. The total system noise for this readout scheme was equal to ~2.1 in units of quanta. For incident photons in the 800 to 1300 nm range, the amplifier increased the average resolving power of the detector from ~6.7 to 9.3 at which point the resolution becomes limited by noise on the pulse height of the signal. Noise measurements suggest that a resolving power of up to 25 is possible if redesigned detectors can remove this additional noise source. △ Less

Submitted 6 July, 2019; originally announced July 2019.

Estimating a probability of failure with the convex order in computer experiments

Authors: Lucie Bernard, Philippe Leduc

Abstract: This paper deals with the estimation of a failure probability of an industrial product. To be more specific, it is defined as the probability that the output of a physical model, with random input variables, exceeds a threshold. The model corresponds with an expensive to evaluate black-box function, so that classical Monte Carlo simulation methods cannot be applied. Bayesian principles of the Krig… ▽ More This paper deals with the estimation of a failure probability of an industrial product. To be more specific, it is defined as the probability that the output of a physical model, with random input variables, exceeds a threshold. The model corresponds with an expensive to evaluate black-box function, so that classical Monte Carlo simulation methods cannot be applied. Bayesian principles of the Kriging method are then used to design an estimator of the failure probability. From a numerical point of view, the practical use of this estimator is restricted. An alternative estimator is proposed, which is equivalent in term of bias. The main result of this paper concerns the existence of a convex order inequality between these two estimators. This inequality allows to compare their efficiency and to quantify the uncertainty on the results that these estimators provide. A sequential procedure for the construction of a design of computer experiments, based on the principle of the Stepwise Uncertainty Reduction strategies, also results of the convex order inequality. The interest of this approach is highlighted through the study of a real case from the company STMicroelectronics. △ Less

Submitted 3 July, 2019; originally announced July 2019.

Angiotensin II cyclic analogs as tools to investigate AT1R biased signaling mechanisms

Authors: David St-Pierre, Jérôme Cabana, Brian J. Holleran, Élie Besserer-Offroy, Emanuel Escher, Gaétan Guillemette, Pierre Lavigne, Richard Leduc

Abstract: G protein coupled receptors (GPCRs) produce pleiotropic effects by their capacity to engage numerous signaling pathways once activated. Functional selectivity (also called biased signaling), where specific compounds can bring GPCRs to adopt conformations that enable selective receptor coupling to distinct signaling pathways, continues to be significantly investigated. However, an important but oft… ▽ More G protein coupled receptors (GPCRs) produce pleiotropic effects by their capacity to engage numerous signaling pathways once activated. Functional selectivity (also called biased signaling), where specific compounds can bring GPCRs to adopt conformations that enable selective receptor coupling to distinct signaling pathways, continues to be significantly investigated. However, an important but often overlooked aspect of functional selectivity is the capability of ligands such as angiotensin II (AngII) to adopt specific conformations that may preferentially bind to selective GPCRs structures. Understanding both receptor and ligand conformation is of the utmost importance for the design of new drugs targeting GPCRs. In this study, we examined the properties of AngII cyclic analogs to impart biased agonism on the angiotensin type 1 receptor (AT1R). Positions 3 and 5 of AngII were substituted for cysteine and homocysteine residues ([Sar1Hcy3,5]AngII, [Sar1Cys3Hcy5]AngII and [Sar1Cys3,5]AngII) and the resulting analogs were evaluated for their capacity to activate the Gq/11, G12, Gi2, Gi3, Gz, ERK and \b{eta}-arrestin (\b{eta}arr) signaling pathways via AT1R. Interestingly, [Sar1Hcy3,5]AngII exhibited potency and full efficacy on all pathways tested with the exception of the Gq pathway. Molecular dynamic simulations showed that the energy barrier associated with the insertion of residue Phe8 of AngII within the hydrophobic core of AT1R, associated with Gq/11 activation, is increased with [Sar1Hcy3,5]AngII. These results suggest that constraining the movements of molecular determinants within a given ligand by introducing cyclic structures may lead to the generation of novel ligands providing more efficient biased agonism. △ Less

Submitted 26 March, 2019; originally announced March 2019.

Comments: This is the preprint version of the following article: St-Pierre D, et al. (2018), Biochem Pharmacol. doi: 10.1016/j.bcp.2018.04.021, which has been accepted and published in final form at https://www.sciencedirect.com/science/article/pii/S0006295218301643. Supplementary information are freely available at doi: 10.6084/m9.figshare.6108440

Journal ref: St-Pierre D, et al. (2018), Biochem Pharmacol. 154:104-17

Label-free cell signaling pathway deconvolution of Angiotensin type 1 receptor reveals time-resolved G-protein activity and distinct AngII and AngIII\IV responses

Authors: Sandrine Lavenus, Élie Simard, Élie Besserer-Offroy, Ulrike Ulrike Froehlich, Richard Leduc, Michel Grandbois

Abstract: Angiotensin II (AngII) type 1 receptor (AT1R) is a G protein-coupled receptor known for its role in numerous physiological processes and its implication in many vascular diseases. Its functions are mediated through G protein dependent and independent signaling pathways. AT1R has several endogenous peptidic agonists, all derived from angiotensinogen, as well as several synthetic ligands known to el… ▽ More Angiotensin II (AngII) type 1 receptor (AT1R) is a G protein-coupled receptor known for its role in numerous physiological processes and its implication in many vascular diseases. Its functions are mediated through G protein dependent and independent signaling pathways. AT1R has several endogenous peptidic agonists, all derived from angiotensinogen, as well as several synthetic ligands known to elicit biased signaling responses. Here, surface plasmon resonance (SPR) was used as a cell- based and label-free technique to quantify, in real time, the response of HEK293 cells stably expressing the human AT1R. The goal was to take advantage of the integrative nature of this assay to identify specific signaling pathways in the features of the response profiles generated by numerous endogenous and synthetic ligands of AT1R. First, we assessed the contributions of Gq, G12/13, Gi, Gbg, ERK1/2 and \b{eta}- arrestins pathways in the cellular responses measured by SPR where Gq, G12/Rho/ROCK together with \b{eta}-arrestins and ERK1/2 were found to play significant roles. More specifically, we established a major role for G12 in the early events of the AT1R-dependent response, which was followed by a robust ERK1/2 component associated to the later phase of the signal. Interestingly, endogenous AT1R ligands (AngII, AngIII and AngIV) exhibited distinct responses signatures with a significant increase of the ERK1/2-like components for both AngIII and AngIV, which points toward possibly distinct physiological roles for the later. We also tested AT1R biased ligands, all of which affected both the early and later events. Our results support SPR-based integrative cellular assays as a powerful approach to delineate the contribution of specific signaling pathways for a given cell response and reveal response differences associated with ligands with distinct pharmacological properties. △ Less

Submitted 26 March, 2019; originally announced March 2019.

Comments: This is the accepted (postprint) version of the following article: Lavenus S, et al. (2018). Pharmacol Res. doi: 10.1016/j.phrs.2018.06.027, which has been accepted and published in its final form at https://www.sciencedirect.com/science/article/pii/S1043661818303207

Journal ref: Pharmacol Res, 136:108-20 (2018)

The hypotensive effect of activated apelin receptor is correlated with \b{eta}-arrestin recruitment

Authors: Élie Besserer-Offroy, Patrick Bérubé, Jérôme Côté, Alexandre Murza, Jean-Michel Longpré, Robert Dumaine, Olivier Lesur, Mannix Auger-Messier, Richard Leduc, Éric Marsault, Philippe Sarret

Abstract: The apelinergic system is an important player in the regulation of both vascular tone and cardiovascular function, making this physiological system an attractive target for drug development for hypertension, heart failure and ischemic heart disease. Indeed, apelin exerts a positive inotropic effect in humans whilst reducing peripheral vascular resistance. In this study, we investigated the signali… ▽ More The apelinergic system is an important player in the regulation of both vascular tone and cardiovascular function, making this physiological system an attractive target for drug development for hypertension, heart failure and ischemic heart disease. Indeed, apelin exerts a positive inotropic effect in humans whilst reducing peripheral vascular resistance. In this study, we investigated the signaling pathways through which apelin exerts its hypotensive action. We synthesized a series of apelin-13 analogs whereby the C-terminal Phe13 residue was replaced by natural or unnatural amino acids. In HEK293 cells expressing APJ, we evaluated the relative efficacy of these compounds to activate Gαi1 and GαoA G-proteins, recruit \b{eta}-arrestins 1 and 2 (\b{eta}arrs), and inhibit cAMP production. Calculating the transduction ratio for each pathway allowed us to identify several analogs with distinct signaling profiles. Furthermore, we found that these analogs delivered i.v. to Sprague-Dawley rats exerted a wide range of hypotensive responses. Indeed, two compounds lost their ability to lower blood pressure, while other analogs significantly reduced blood pressure as apelin-13. Interestingly, analogs that did not lower blood pressure were less effective at recruiting \b{eta}arrs. Finally, using Spearman correlations, we established that the hypotensive response was significantly correlated with \b{eta}arr recruitment but not with G protein- dependent signaling. In conclusion, our results demonstrated that the \b{eta}arr recruitment potency is involved in the hypotensive efficacy of activated APJ. △ Less

Submitted 13 March, 2018; v1 submitted 12 March, 2018; originally announced March 2018.

Comments: This is the accepted (postprint) version of the following article: Besserer-Offroy É, et al. (2018), Pharmacol Res. doi: 10.1016/j.phrs.2018.02.032, which has been accepted and published in final form at https://www.sciencedirect.com/science/article/pii/S1043661817313804 V1: Preprint version V2: Accepted (postprint) version

Journal ref: Elie Besserer-Offroy, et al. Pharmacol Res, Epub 9 March 2018

The signaling signature of the neurotensin type 1 receptor with endogenous ligands

Authors: Élie Besserer-Offroy, Rebecca L Brouillette, Sandrine Lavenus, Ulrike Froehlich, Andrea Brumwell, Alexandre Murza, Jean-Michel Longpré, Éric Marsault, Michel Grandbois, Philippe Sarret, Richard Leduc

Abstract: The human neurotensin 1 receptor (hNTS1) is a G protein-coupled receptor involved in many physiological functions, including analgesia, hypothermia, and hypotension. To gain a better understanding of which signaling pathways or combination of pathways are linked to NTS1 activation and function, we investigated the ability of activated hNTS1, which was stably expressed by CHO-K1 cells, to directly… ▽ More The human neurotensin 1 receptor (hNTS1) is a G protein-coupled receptor involved in many physiological functions, including analgesia, hypothermia, and hypotension. To gain a better understanding of which signaling pathways or combination of pathways are linked to NTS1 activation and function, we investigated the ability of activated hNTS1, which was stably expressed by CHO-K1 cells, to directly engage G proteins, activate second messenger cascades and recruit \b{eta}-arrestins. Using BRET-based biosensors, we found that neurotensin (NT), NT(8-13) and neuromedin N (NN) activated the Gαq-, Gαi1-, GαoA-, and Gα13-protein signaling pathways as well as the recruitment of \b{eta}-arrestins 1 and 2. Using pharmacological inhibitors, we further demonstrated that all three ligands stimulated the production of inositol phosphate and modulation of cAMP accumulation along with ERK1/2 activation. Interestingly, despite the functional coupling to Gαi1 and GαoA, NT was found to produce higher levels of cAMP in the presence of pertussis toxin, supporting that hNTS1 activation leads to cAMP accumulation in a Gαs-dependent manner. Additionally, we demonstrated that the full activation of ERK1/2 required signaling through both a PTX-sensitive Gi/o-c-Src signaling pathway and PLCb-DAG-PKC-Raf-1- dependent pathway downstream of Gq. Finally, the whole-cell integrated signatures monitored by the cell-based surface plasmon resonance and changes in the electrical impedance of a confluent cell monolayer led to identical phenotypic responses between the three ligands. The characterization of the hNTS1-mediated cellular signaling network will be helpful to accelerate the validation of potential NTS1 biased ligands with an improved therapeutic/adverse effect profile. △ Less

Submitted 13 March, 2018; v1 submitted 12 March, 2018; originally announced March 2018.

Comments: This is the accepted (postprint) version of the following article: Besserer-Offroy É, et al. (2017). Eur J Pharmacol. doi: 10.1016/j.ejphar.2017.03.046, which has been accepted and published in its final form at http://www.sciencedirect.com/science/article/pii/S0014299917302157 V1: Preprint version V2: Accepted version (postprint)

Journal ref: Besserer-Offroy É, et al. (2017). Eur J Pharmacol. 805 (2017) 1-13

Development of Aluminum LEKIDs for Balloon-Borne Far-IR Spectroscopy

Authors: S. Hailey-Dunsheath, A. C. M. Barlis, J. E. Aguirre, C. M. Bradford, J. G. Redford, T. S. Billings, H. G. LeDuc, C. M. McKenney, M. I. Hollister

Abstract: We are develo** lumped-element kinetic inductance detectors (LEKIDs) designed to achieve background-limited sensitivity for far-infrared (FIR) spectroscopy on a stratospheric balloon. The Spectroscopic Terahertz Airborne Receiver for Far-InfraRed Exploration (STARFIRE) will study the evolution of dusty galaxies with observations of the [CII] 158 $μ$m and other atomic fine-structure transitions a… ▽ More We are develo** lumped-element kinetic inductance detectors (LEKIDs) designed to achieve background-limited sensitivity for far-infrared (FIR) spectroscopy on a stratospheric balloon. The Spectroscopic Terahertz Airborne Receiver for Far-InfraRed Exploration (STARFIRE) will study the evolution of dusty galaxies with observations of the [CII] 158 $μ$m and other atomic fine-structure transitions at $z=0.5-1.5$, both through direct observations of individual luminous infrared galaxies, and in blind surveys using the technique of line intensity map**. The spectrometer will require large format ($\sim$1800 detectors) arrays of dual-polarization sensitive detectors with NEPs of $1 \times 10^{-17}$ W Hz$^{-1/2}$. The low-volume LEKIDs are fabricated with a single layer of aluminum (20 nm thick) deposited on a crystalline silicon wafer, with resonance frequencies of $100-250$ MHz. The inductor is a single meander with a linewidth of 0.4 $μ$m, patterned in a grid to absorb optical power in both polarizations. The meander is coupled to a circular waveguide, fed by a conical feedhorn. Initial testing of a small array prototype has demonstrated good yield, and a median NEP of $4 \times 10^{-18}$ W Hz$^{-1/2}$. △ Less

Submitted 16 April, 2018; v1 submitted 6 March, 2018; originally announced March 2018.

Comments: accepted for publication in Journal of Low Temperature Physics

More on the New Large $D$ Limit of Matrix Models

Authors: Tatsuo Azeyanagi, Frank Ferrari, Paolo Gregori, Laetitia Leduc, Guillaume Valette

Abstract: In this paper, we extend the recent analysis of the new large $D$ limit of matrix models to the cases where the action contains arbitrary multi-trace interaction terms as well as to arbitrary correlation functions. We discuss both the cases of complex and Hermitian matrices, with $\text{U}(N)^{2}\times\text{O}(D)$ and $\text{U}(N)\times\text{O}(D)$ symmetries respectively. In the latter case, the… ▽ More In this paper, we extend the recent analysis of the new large $D$ limit of matrix models to the cases where the action contains arbitrary multi-trace interaction terms as well as to arbitrary correlation functions. We discuss both the cases of complex and Hermitian matrices, with $\text{U}(N)^{2}\times\text{O}(D)$ and $\text{U}(N)\times\text{O}(D)$ symmetries respectively. In the latter case, the new large $D$ limit is consistent for planar diagrams; at higher genera, it crucially requires the tracelessness condition. For similar reasons, the large $N$ limit of tensor models with reduced symmetries is typically inconsistent already at leading order without the tracelessness condition. We also further discuss some interesting properties of purely bosonic models pointed out recently and explain that the standard argument predicting a non-trivial IR behaviour in fermionic models à la SYK does not work for bosonic models. Finally, we explain that the new large $D$ scaling is consistent with linearly realized supersymmetry. △ Less

Submitted 19 October, 2017; originally announced October 2017.

Comments: 27 pages

Design and performance of dual-polarization lumped-element kinetic inductance detectors for millimeter-wave polarimetry

Authors: H. McCarrick, G. Jones, B. R. Johnson, M. H. Abitbol, P. A. R. Ade, S. Bryan, P. Day, T. Essinger-Hileman, D. Flanigan, H. G. Leduc, M. Limon, P. Mauskopf, A. Miller, C. Tucker

Abstract: Lumped-element kinetic inductance detectors (LEKIDs) are an attractive technology for millimeter-wave observations that require large arrays of extremely low-noise detectors. We designed, fabricated and characterized 64-element (128 LEKID) arrays of horn-coupled, dual-polarization LEKIDs optimized for ground-based CMB polarimetry. Our devices are sensitive to two orthogonal polarizations in a sing… ▽ More Lumped-element kinetic inductance detectors (LEKIDs) are an attractive technology for millimeter-wave observations that require large arrays of extremely low-noise detectors. We designed, fabricated and characterized 64-element (128 LEKID) arrays of horn-coupled, dual-polarization LEKIDs optimized for ground-based CMB polarimetry. Our devices are sensitive to two orthogonal polarizations in a single spectral band centered on 150 GHz with $Δν/ν=0.2$. The $65\times 65$ mm square arrays are designed to be tiled into the focal plane of an optical system. We demonstrate the viability of these dual-polarization LEKIDs with laboratory measurements. The LEKID modules are tested with an FPGA-based readout system in a sub-kelvin cryostat that uses a two-stage adiabatic demagnetization refrigerator. The devices are characterized using a blackbody and a millimeter-wave source. The polarization properties are measured with a cryogenic stepped half-wave plate. We measure the resonator parameters and the detector sensitivity, noise spectrum, dynamic range, and polarization response. The resonators have internal quality factors approaching $1\times 10^{6}$. The detectors have uniform response between orthogonal polarizations and a large dynamic range. The detectors are photon-noise limited above 1 pW of absorbed power. The noise-equivalent temperatures under a 3.4 K blackbody load are $<100~μ\mathrm{K\sqrt{s}}$. The polarization fractions of detectors sensitive to orthogonal polarizations are >80%. The entire array is multiplexed on a single readout line, demonstrating a multiplexing factor of 128. The array and readout meet the requirements for 4 arrays to be read out simultaneously for a multiplexing factor of 512. This laboratory study demonstrates the first dual-polarization LEKID array optimized for CMB polarimetry and shows the readiness of the detectors for on-sky observations. △ Less

Submitted 19 November, 2017; v1 submitted 5 October, 2017; originally announced October 2017.

Comments: Accepted in Astronomy & Astrophysics, revised version. 11 pages, 8 figures

Journal ref: A&A 610, A45 (2018)

Web of Science: showing a bug today that can mislead scientific research output's prediction

Authors: Pablo Diniz Batista, Igor Marques-Carneiro, Leduc Hermeto de Almeida Fauth, Marcia de Oliveira Reis Brandão

Abstract: As it happened in all domains of human activities, economic issues and the increase of people working in scientific research have altered the way scientific production is evaluated so as the objectives of performing the evaluation. Introduced in 2005 by J. E. Hirsch as an indicator able to measure individual scientific output not only in terms of quantity, but also in terms of quality, h index has… ▽ More As it happened in all domains of human activities, economic issues and the increase of people working in scientific research have altered the way scientific production is evaluated so as the objectives of performing the evaluation. Introduced in 2005 by J. E. Hirsch as an indicator able to measure individual scientific output not only in terms of quantity, but also in terms of quality, h index has spread throughout the world. In 2007, Hirsch proposed its adoption also as the best to predict future scientific achievement and, consequently, a useful guide for investments in research and for institutions when hiring members for their scientific staff. Since then, several authors have also been using the Thomson ISI Web of Science database to develop their proposals for evaluating research output. Here, using a software we have developed, we analyse more than 100 thousand articles and show that a subtle flaw in Web of Science can inflate the results of info collected, therefore compromising the exactness and, consequently, the effectiveness of Hirsch's proposal and its variations. △ Less

Submitted 6 December, 2016; v1 submitted 4 November, 2016; originally announced November 2016.

Comments: Submitted to Scientometrics on December 3, 2016

Development of dual-polarization LEKIDs for CMB observations

Authors: Heather McCarrick, Maximilian H. Abitbol, Peter A. R. Ade, Peter Barry, Sean Bryan, George Che, Peter Day, Simon Doyle, Daniel Flanigan, Bradley R. Johnson, Glenn Jones, Henry G. LeDuc, Michele Limon, Philip Mauskopf, Amber Miller, Carole Tucker, Jonas Zmuidzinas

Abstract: We discuss the design considerations and initial measurements from arrays of dual-polarization, lumped element kinetic inductance detectors (LEKIDs) nominally designed for cosmic microwave background (CMB) studies. The detectors are horn-coupled, and each array element contains two single-polarization LEKIDs, which are made from thin-film aluminum and optimized for a single spectral band centered… ▽ More We discuss the design considerations and initial measurements from arrays of dual-polarization, lumped element kinetic inductance detectors (LEKIDs) nominally designed for cosmic microwave background (CMB) studies. The detectors are horn-coupled, and each array element contains two single-polarization LEKIDs, which are made from thin-film aluminum and optimized for a single spectral band centered on 150 GHz. We are develo** two array architectures, one based on 160 micron thick silicon wafers and the other based on silicon-on-insulator (SOI) wafers with a 30 micron thick device layer. The 20-element test arrays (40 LEKIDs) are characterized with both a linearly-polarized electronic millimeter wave source and a thermal source. We present initial measurements including the noise spectra, noise-equivalent temperature, and responsivity. We discuss future testing and further design optimizations to be implemented. △ Less

Submitted 12 July, 2016; originally announced July 2016.

Comments: 7 pages, 5 figures, Proc. SPIE Astronomical Telescopes + Instrumentation 2016, Paper 9914-24

Incentivizing Resilience in Financial Networks

Authors: Matt V. Leduc, Stefan Thurner

Abstract: When banks extend loans to each other, they generate a negative externality in the form of systemic risk. They create a network of interbank exposures by which they expose other banks to potential insolvency cascades. In this paper, we show how a regulator can use information about the financial network to devise a transaction-specific tax based on a network centrality measure that captures system… ▽ More When banks extend loans to each other, they generate a negative externality in the form of systemic risk. They create a network of interbank exposures by which they expose other banks to potential insolvency cascades. In this paper, we show how a regulator can use information about the financial network to devise a transaction-specific tax based on a network centrality measure that captures systemic importance. Since different transactions have different impact on creating systemic risk, they are taxed differently. We call this tax a Systemic Risk Tax (SRT). We use an equilibrium concept inspired by the matching markets literature to show analytically that this SRT induces a unique equilibrium matching of lenders and borrowers that is systemic-risk efficient, i.e. it minimizes systemic risk given a certain transaction volume. On the other hand, we show that without this SRT multiple equilibrium matchings exist, which are generally inefficient. This allows the regulator to effectively stimulate a `rewiring' of the equilibrium interbank network so as to make it more resilient to insolvency cascades, without sacrificing transaction volume. Moreover, we show that a standard financial transaction tax (e.g. a Tobin-like tax) has no impact on resha** the equilibrium financial network because it taxes all transactions indiscriminately. A Tobin-like tax is indeed shown to have a limited effect on reducing systemic risk while it decreases transaction volume. △ Less

Submitted 23 June, 2017; v1 submitted 11 June, 2016; originally announced June 2016.

Comments: 38 pages, 9 figures

Journal ref: Journal of Economic Dynamics & Control 82 (2017) 44-66

2D quantum gravity on compact Riemann surfaces with non-conformal matter

Authors: Adel Bilal, Laetitia Leduc

Abstract: We study the gravitational action induced by coupling two-dimensional non-conformal, massive matter to gravity on a compact Riemann surface. We express this gravitational action in terms of finite and well-defined quantities for any value of the mass. A small-mass expansion gives back the Liouville action in the massless limit, the Mabuchi and Aubin-Yau actions to first order, as well as an infini… ▽ More We study the gravitational action induced by coupling two-dimensional non-conformal, massive matter to gravity on a compact Riemann surface. We express this gravitational action in terms of finite and well-defined quantities for any value of the mass. A small-mass expansion gives back the Liouville action in the massless limit, the Mabuchi and Aubin-Yau actions to first order, as well as an infinite series of higher-order contributions written in terms of purely geometric quantities. △ Less

Submitted 3 September, 2016; v1 submitted 6 June, 2016; originally announced June 2016.

Comments: 15 pages, minor corrections