-
Immersive virtual worlds: Multi-sensory virtual environments for health and safety training
Authors:
Glyn Lawson,
Emily Shaw,
Tessa Roper,
Tommy Nilsson,
Laura Bajorunaite,
Ayesha Batool
Abstract:
Virtual environments (VEs) offer potential benefits to health and safety training: exposure to dangerous (virtual) environments; the opportunity for experiential learning; and a high level of control over the training, in that aspects can be repeated or reviewed based on the trainee's performance. However, VEs are typically presented as audiovisual (AV) systems, whereas engagement of other senses…
▽ More
Virtual environments (VEs) offer potential benefits to health and safety training: exposure to dangerous (virtual) environments; the opportunity for experiential learning; and a high level of control over the training, in that aspects can be repeated or reviewed based on the trainee's performance. However, VEs are typically presented as audiovisual (AV) systems, whereas engagement of other senses could increase the immersion in the virtual experience. Moreover, other senses play a key role in certain health and safety contexts, for example the feel of heat and smell in a fire or smell in a fuel leak. A multisensory (MS) VE was developed, which provided simulated heat and smell in accordance with events in a virtual world. As users approached a virtual fire, they felt heat from three 2 kW heaters and smelled smoke from a scent diffuser. Behaviours in the MS VE demonstrated higher validity than those in a comparable AV VE, which ratings and verbatim responses indicated was down to a greater belief that participants were in a real fire. However, a study of the effectiveness of the MS VE as a training tool demonstrated that it did not offer benefits over AV as measured by a written knowledge test and subjective ratings of engagement, attitude towards health and safety and desire to repeat. However, the study found further evidence for the use of AV VEs in health and safety training, particularly as the subjective ratings were generally better than for PowerPoint based training. Despite the lack of evidence for MS simulation on traditional measures of training, the different attitudes and experiences of users suggest that it may have value as a system for changing trainees' attitudes towards their personal safety and awareness. This view was supported by feedback from industrial partners.
△ Less
Submitted 1 October, 2019;
originally announced October 2019.
-
The Heat is On: Exploring User Behaviour in a Multisensory Virtual Environment for Fire Evacuation
Authors:
Emily Shaw,
Tessa Roper,
Tommy Nilsson,
Glyn Lawson,
Sue V. G. Cobb,
Daniel Miller
Abstract:
Understanding validity of user behaviour in Virtual Environments (VEs) is critical as they are increasingly being used for serious Health and Safety applications such as predicting human behaviour and training in hazardous situations. This paper presents a comparative study exploring user behaviour in VE-based fire evacuation and investigates whether this is affected by the addition of thermal and…
▽ More
Understanding validity of user behaviour in Virtual Environments (VEs) is critical as they are increasingly being used for serious Health and Safety applications such as predicting human behaviour and training in hazardous situations. This paper presents a comparative study exploring user behaviour in VE-based fire evacuation and investigates whether this is affected by the addition of thermal and olfactory simulation. Participants (N=43) were exposed to a virtual fire in an office building. Quantitative and qualitative analyses of participant attitudes and behaviours found deviations from those we would expect in real life (e.g. pre-evacuation actions), but also valid behaviours like fire avoidance. Potentially important differences were found between multisensory and audiovisual-only conditions (e.g. perceived urgency). We conclude VEs have significant potential in safety-related applications, and that multimodality may afford additional uses in this context, but the identified limitations of behavioural validity must be carefully considered to avoid misapplication of the technology.
△ Less
Submitted 12 February, 2019;
originally announced February 2019.
-
Experimentation Procedure for Offloaded Mini-Apps Executed on Cluster Architectures with Xeon Phi Accelerators
Authors:
Gary Lawson,
Vaibhav Sundriyal,
Masha Sosonkina,
Yuzhong Shen
Abstract:
A heterogeneous cluster architecture is complex. It contains hundreds, or thousands of devices connected by a tiered communication system in order to solve a problem. As a heterogeneous system, these devices will have varying performance capabilities. To better understand the interactions which occur between the various devices during execution, an experimentation procedure has been devised to cap…
▽ More
A heterogeneous cluster architecture is complex. It contains hundreds, or thousands of devices connected by a tiered communication system in order to solve a problem. As a heterogeneous system, these devices will have varying performance capabilities. To better understand the interactions which occur between the various devices during execution, an experimentation procedure has been devised to capture, store, and analyze important and meaningful data. The procedure consists of various tools, techniques, and methods for capturing relevant timing, power, and performance data for a typical execution. This procedure currently applies to architectures with Intel Xeon processors and Intel Xeon Phi accelerators. It has been applied to the Co-Design Molecular Dynamics mini-app, courtesy of the ExMatEx team. This work aims to provide end-users with a strategy for investigating codes executed on heterogeneous cluster architectures with Xeon Phi accelerators.
△ Less
Submitted 14 September, 2015; v1 submitted 7 September, 2015;
originally announced September 2015.
-
Towards Modeling Energy Consumption of Xeon Phi
Authors:
Gary Lawson,
Masha Sosonkina,
Yuzhong Shen
Abstract:
In the push for exascale computing, energy efficiency is of utmost concern. System architectures often adopt accelerators to hasten application execution at the cost of power. The Intel Xeon Phi co-processor is unique accelerator that offers application designers high degrees of parallelism, energy-efficient cores, and various execution modes. To explore the vast number of available configurations…
▽ More
In the push for exascale computing, energy efficiency is of utmost concern. System architectures often adopt accelerators to hasten application execution at the cost of power. The Intel Xeon Phi co-processor is unique accelerator that offers application designers high degrees of parallelism, energy-efficient cores, and various execution modes. To explore the vast number of available configurations, a model must be developed to predict execution time, power, and energy for the CPU and Xeon Phi. An experimentation method has been developed which measures power for the CPU and Xeon Phi separately, as well as total system power. Execution time and performance are also captured for two experiments conducted in this work. The experiments, frequency scaling and strong scaling, will help validate the adopted model and assist in the development of a model which defines the host and Xeon Phi. The proxy applications investigated, representative of large-scale real-world applications, are Co-Design Molecular Dynamics (CoMD) and Livermore Unstructured Lagrangian Explicit Shock Hydrodynamics (LULESH). The frequency experiment discussed in this work is used to determine the time on-chip and off-chip to measure the compute- or latencyboundedness of the application. Energy savings were not obtained in symmetric mode for either application.
△ Less
Submitted 25 May, 2015;
originally announced May 2015.
-
Growth and characterization of GaAs nanowires on carbon nanotubes composite films: toward flexible nanodevices
Authors:
P. K. Mohseni,
G. Lawson,
C. Couteau,
G. Weihs,
A. Adronov,
R. R. LaPierre
Abstract:
Poly(ethylene imine) functionalized carbon nanotube thin films, prepared using the vacuum filtration method, were decorated with Au nanoparticles by in situ reduction of HAuCl4 under mild conditions. These Au nanoparticles were subsequently employed for the growth of GaAs nanowires (NWs) by the vapor-liquid-solid process in a gas source molecular beam epitaxy system. The process resulted in the…
▽ More
Poly(ethylene imine) functionalized carbon nanotube thin films, prepared using the vacuum filtration method, were decorated with Au nanoparticles by in situ reduction of HAuCl4 under mild conditions. These Au nanoparticles were subsequently employed for the growth of GaAs nanowires (NWs) by the vapor-liquid-solid process in a gas source molecular beam epitaxy system. The process resulted in the dense growth of GaAs NWs across the entire surface of the single-walled nanotube (SWNT) films. The NWs, which were orientated in a variety of angles with respect to the SWNT films, ranged in diameter between 20 to 200 nm, with heights up to 2.5 um. Transmission electron microscopy analysis of the NW-SWNT interface indicated that NW growth was initiated upon the surface of the nanotube composite films. Photoluminescence characterization of a single NW specimen showed high optical quality. Rectifying asymmetric current-voltage behavior was observed from contacted NW ensembles and attributed to the core-shell pn-junction within the NWs. Potential applications of such novel hybrid architectures include flexible solar cells, displays, and sensors.
△ Less
Submitted 15 December, 2008;
originally announced December 2008.
