-
Efficient ultra-broadband low-resolution astrophotonic spectrographs
Authors:
Pradip Gatkine,
Greg Sercel,
Nemanja Jovanovic,
Ronald Broeke,
Katarzyna Lawniczuk,
Marco Passoni,
Ashok Balakrishnan,
Serge Bidnyk,
Jielong Yin,
Jeffrey Jewell,
J. Kent Wallace,
Dimitri Mawet
Abstract:
Broadband low-resolution near-infrared spectrographs in a compact form are crucial for ground- and space-based astronomy and other fields of sensing. Astronomical spectroscopy poses stringent requirements including high efficiency, broad band operation ($>$ 300 nm), and in some cases, polarization insensitivity. We present and compare experimental results from the design, fabrication, and characte…
▽ More
Broadband low-resolution near-infrared spectrographs in a compact form are crucial for ground- and space-based astronomy and other fields of sensing. Astronomical spectroscopy poses stringent requirements including high efficiency, broad band operation ($>$ 300 nm), and in some cases, polarization insensitivity. We present and compare experimental results from the design, fabrication, and characterization of broadband (1200 - 1650 nm) arrayed waveguide grating (AWG) spectrographs built using the two most promising low-loss platforms - Si$_3$N$_4$ (rectangular waveguides) and doped-SiO$_2$ (square waveguides). These AWGs have a resolving power ($λ/Δλ$) of ~200, a free spectral range of ~ 200-350 nm, and a small footprint of ~ 50-100 mm$^2$. The peak overall (fiber-chip-fiber) efficiency of the doped-SiO$_2$ AWG was ~ 79\% (1 dB), and it exhibited a negligible polarization-dependent shift compared to the channel spacing. For Si$_3$N$_4$ AWGs, the peak overall efficiency in TE mode was ~ 50\% (3 dB), and the main loss component was found to be fiber-to-chip coupling losses. These broadband AWGs are key to enabling compact integrations such as multi-object spectrographs or dispersion back-ends for other astrophotonic devices such as photonic lanterns or nulling interferometers.
△ Less
Submitted 2 April, 2024;
originally announced April 2024.
-
2023 Astrophotonics Roadmap: pathways to realizing multi-functional integrated astrophotonic instruments
Authors:
Nemanja Jovanovic,
Pradip Gatkine,
Narsireddy Anugu,
Rodrigo Amezcua-Correa,
Ritoban Basu Thakur,
Charles Beichman,
Chad Bender,
Jean-Philippe Berger,
Azzurra Bigioli,
Joss Bland-Hawthorn,
Guillaume Bourdarot,
Charles M. Bradford,
Ronald Broeke,
Julia Bryant,
Kevin Bundy,
Ross Cheriton,
Nick Cvetojevic,
Momen Diab,
Scott A. Diddams,
Aline N. Dinkelaker,
Jeroen Duis,
Stephen Eikenberry,
Simon Ellis,
Akira Endo,
Donald F. Figer
, et al. (55 additional authors not shown)
Abstract:
Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilizatio…
▽ More
Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns, complex aperiodic fiber Bragg gratings, complex beam combiners to enable long baseline interferometry, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional instruments will be realized leading to novel observing capabilities for both ground and space platforms.
△ Less
Submitted 1 November, 2023;
originally announced November 2023.
-
Flattening laser frequency comb spectra with a high dynamic range, broadband spectral shaper on-a-chip
Authors:
Nemanja Jovanovic,
Pradip Gatkine,
Boqiang Shen,
Maodong Gao,
Nick Cvetojevic,
Katarzyna Lawniczuk,
Ronald Broeke,
Charles Beichman,
Stephanie Leifer,
Jeffery Jewell,
Gautam Vasisht,
Dimitri Mawet
Abstract:
Spectral sha** is critical to many fields of science. In astronomy for example, the detection of exoplanets via the Doppler effect hinges on the ability to calibrate a high resolution spectrograph. Laser frequency combs can be used for this, but the wildly varying intensity across the spectrum can make it impossible to optimally utilize the entire comb, leading to a reduced overall precision of…
▽ More
Spectral sha** is critical to many fields of science. In astronomy for example, the detection of exoplanets via the Doppler effect hinges on the ability to calibrate a high resolution spectrograph. Laser frequency combs can be used for this, but the wildly varying intensity across the spectrum can make it impossible to optimally utilize the entire comb, leading to a reduced overall precision of calibration. To circumvent this, astronomical applications of laser frequency combs rely on a bulk optic setup which can flatten the output spectrum before sending it to the spectrograph. Such flatteners require complex and expensive optical elements like spatial light modulators and have non-negligible bench top footprints. Here we present an alternative in the form of an all-photonic spectral shaper that can be used to flatten the spectrum of a laser frequency comb. The device consists of a circuit etched into a silicon nitride wafer that supports an arrayed-waveguide grating to disperse the light over hundreds of nanometers in wavelength, followed by Mach-Zehnder interferometers to control the amplitude of each channel, thermo-optic phase modulators to phase the channels and a second arrayed-waveguide grating to recombine the spectrum. The demonstrator device operates from 1400 to 1800 nm (covering the astronomical H band), with twenty 20 nm wide channels. The device allows for nearly 40 dBs of dynamic modulation of the spectrum via the Mach-Zehnders , which is greater than that offered by most spatial light modulators. With a superluminescent diode, we reduced the static spectral variation to ~3 dB, limited by the properties of the components used in the circuit and on a laser frequency comb we managed to reduce the modulation to 5 dBs, sufficient for astronomical applications.
△ Less
Submitted 3 October, 2022;
originally announced October 2022.
-
An all-photonic, dynamic device for flattening the spectrum of a laser frequency comb for precise calibration of radial velocity measurements
Authors:
Nemanja Jovanovic,
Pradip Gatkine,
Boqiang Shen,
Maodong Gao,
Nick Cvetojevic,
Katarzyna Ławniczuk,
Ronald Broeke,
Charles Beichman,
Stephanie Leifer,
Jeffery Jewell,
Gautam Vasisht,
Dimitri Mawet
Abstract:
Laser frequency combs are fast becoming critical to reaching the highest radial velocity precisions. One shortcoming is the highly variable brightness of the comb lines across the spectrum (up to 4-5 orders of magnitude). This can result in some lines saturating while others are at low signal and lost in the noise. Losing lines to either of these effects reduces the precision and hence effectivene…
▽ More
Laser frequency combs are fast becoming critical to reaching the highest radial velocity precisions. One shortcoming is the highly variable brightness of the comb lines across the spectrum (up to 4-5 orders of magnitude). This can result in some lines saturating while others are at low signal and lost in the noise. Losing lines to either of these effects reduces the precision and hence effectiveness of the comb. In addition, the brightness of the comb lines can vary with time which could drive comb lines with initially reasonable SNR's into the two regimes described above. To mitigate these two effects, laser frequency combs use optical flattener's.
Flattener's are typically bulk optic setups that disperse the comb light with a grating, and then use a spatial light modulator to control the amplitude across the spectrum before recombining the light into another single mode fiber and sending it to the spectrograph. These setups can be large (small bench top), expensive (several hundred thousand dollars) and have limited stability. To address these issues, we have developed an all-photonic spectrum flattener on a chip. The device is constructed from optical waveguides on a SiN chip. The light from the laser frequency comb's output optical fiber can be directly connected to the chip, where the light is first dispersed using an arrayed waveguide grating. To control the brightness of each channel, the light is passed through a Mach-Zehnder interferometer before being recombined with a second arrayed waveguide grating. Thermo-optic phase modulators are used in each channel before recombination to path length match the channels as needed.
Here we present the results from our first generation prototype. The device operates from 1400-1800 nm (covering the H band), with 20, 20 nm wide channels.
△ Less
Submitted 20 September, 2022;
originally announced September 2022.
-
3-beam self-calibrated Kernel nulling photonic interferometer
Authors:
Nick Cvetojevic,
Frantz Martinache,
Peter Chingaipe,
Romain Laugier,
Katarzyna Ławniczuk,
Ronald G. Broeke,
Roxanne Ligi,
Mamadou N'Diaye,
David Mary
Abstract:
The use of interferometric nulling for the direct characterization of extrasolar planets is an exciting prospect, but one that faces many practical challenges when deployed on telescopes. The largest limitation is the extreme sensitivity of nullers to any residual optical path differences between the incoming telescope beams even after adaptive optics or fringe-tracker correction. The recently pro…
▽ More
The use of interferometric nulling for the direct characterization of extrasolar planets is an exciting prospect, but one that faces many practical challenges when deployed on telescopes. The largest limitation is the extreme sensitivity of nullers to any residual optical path differences between the incoming telescope beams even after adaptive optics or fringe-tracker correction. The recently proposed kernel-nulling architecture attempts to alleviate this by producing the destructive interference required for nulling, in a scheme whereby self-calibrated observables can be created efficiently, in effect canceling out residual atmospheric piston terms. Here we experimentally demonstrate for the first time a successful creation of self-calibrated kernel-null observables for nulling interferometry in the laboratory. We achieved this through the use of a purpose-built photonic integrated device, containing a multimode interference coupler that creates one bright, and two nulled outputs when injected with three co-phased telescope beams. The device produces the nulled outputs in a way that, by the subtraction of the measured output flux, create a single self-calibrated kernel-null. We experimentally demonstrate the extraction of kernel-nulls for up to 200 nm induced piston error using a laboratory test-bench at a wavelength of 1.55 μm. Further, we empirically demonstrate the kernel-null behaviour when injected with a binary companion analogue equivalent to a 2.32 mas separation at a contrast of 10^{-2}, under 100 nm RMS upstream piston residuals.
△ Less
Submitted 10 June, 2022;
originally announced June 2022.
-
Potential of commercial SiN MPW platforms for develo** mid/high-resolution integrated photonic spectrographs for astronomy
Authors:
Pradip Gatkine,
Nemanja Jovanovic,
Christopher Hopgood,
Simon Ellis,
Ronald Broeke,
Katarzyna Ławniczuk,
Jeffrey Jewell,
J. Kent Wallace,
Dimitri Mawet
Abstract:
Integrated photonic spectrographs offer an avenue to extreme miniaturization of astronomical instruments, which would greatly benefit extremely large telescopes and future space missions. These devices first require optimization for astronomical applications, which includes design, fabrication and field-testing. Given the high costs of photonic fabrication, Multi-Project Wafer (MPW) SiN offerings,…
▽ More
Integrated photonic spectrographs offer an avenue to extreme miniaturization of astronomical instruments, which would greatly benefit extremely large telescopes and future space missions. These devices first require optimization for astronomical applications, which includes design, fabrication and field-testing. Given the high costs of photonic fabrication, Multi-Project Wafer (MPW) SiN offerings, where a user purchases a portion of a wafer, provide a convenient and affordable avenue to develop this technology. In this work we study the potential of two commonly used SiN waveguide geometries by MPW foundries, i.e. square and rectangular profiles to determine how they affect the performance of mid-high resolution arrayed waveguide grating spectrometers around 1.5 $μ$m. Specifically, we present results from detailed simulations on the mode sizes, shapes, and polarization properties, and on the impact of phase errors on the throughput and cross talk as well as some laboratory results of coupling and propagation losses. From the MPW-run tolerances and our phase-error study, we estimate that an AWG with R $\sim$ 10,000 can be developed with the MPW runs and even greater resolving power is achievable with more reliable, dedicated fabrication runs. Depending on the fabrication and design optimizations, it is possible to achieve throughputs $\sim 60\%$ using the SiN platform. Thus, we show that SiN MPW offerings are highly promising and will play a key role in integrated photonic spectrograph developments for astronomy.
△ Less
Submitted 8 June, 2021;
originally announced June 2021.
