Showing 1–50 of 63 results for author: Laurson, L

On identifying dynamic length scales in crystal plasticity

Authors: Dénes Berta, David Kurunczi-Papp, Lasse Laurson, Péter Dusán Ispánovity

Abstract: Materials are often heterogeneous at various length scales, with variations in grain structure, defects, and composition which has a strong influence on the emergent macroscopic plastic behavior. In particular, heterogeneities lead to fluctuations in the plastic response in the form of jerky flow and ubiquitous strain bursts. One of the crucial aspects of plasticity modeling is scale bridging: In… ▽ More Materials are often heterogeneous at various length scales, with variations in grain structure, defects, and composition which has a strong influence on the emergent macroscopic plastic behavior. In particular, heterogeneities lead to fluctuations in the plastic response in the form of jerky flow and ubiquitous strain bursts. One of the crucial aspects of plasticity modeling is scale bridging: In order to deliver physically correct crystal plasticity models, one needs to determine relevant microstructural length scales. In this paper we advance the idea that continuum descriptions of dislocation mediated plasticity cannot neglect dynamic correlations related to the avalanche behavior. We present an extensive weakest link analysis of crystal plasticity by means of three-dimensional discrete dislocation dynamics simulations with and without spherical precipitates. We investigate strain bursts and related length scales and conclude that while sufficiently strong obstacles to dislocation motion tend to confine the dislocation avalanches within well-defined sub-volumes, in pure dislocation systems the avalanches may span the system, implying that the dynamic length scale is, in fact, the size of the entire sample. Consequences of this finding on continuum modeling are thoroughly discussed. △ Less

Submitted 14 June, 2024; originally announced June 2024.

Reversible-to-irreversible transition of colloidal polycrystals under cyclic athermal quasistatic deformation

Authors: Khushika, Lasse Laurson, Pritam Kumar Jana

Abstract: Cyclic loading on granular packings and amorphous media exhibits a transition from reversible elastic behavior to irreversible plasticity. The present study compares the irreversibility transition and microscopic details of colloidal polycrystals under oscillatory tensile-compressive and shear strain. Under both modes, the systems exhibit a reversible to irreversible transition. However, the strai… ▽ More Cyclic loading on granular packings and amorphous media exhibits a transition from reversible elastic behavior to irreversible plasticity. The present study compares the irreversibility transition and microscopic details of colloidal polycrystals under oscillatory tensile-compressive and shear strain. Under both modes, the systems exhibit a reversible to irreversible transition. However, the strain amplitude at which the transition is observed is larger in the shear strain than in the tensile-compressive mode. The threshold strain amplitude is confirmed by analyzing the dynamical properties, such as mobility and atomic strain (von-Mises shear strain and the volumetric strain). The structural changes are quantified using a hexatic order parameter. Under both modes of deformation, dislocations and grain boundaries in polycrystals disappear, and monocrystals are formed. We also recognize the dislocation motion through grains. The key difference is that strain accumulates diagonally in oscillatory tensile-compressive deformation, whereas, in shear deformation, strain accumulation is along the $x$ or $y$ axis. △ Less

Submitted 1 April, 2024; originally announced April 2024.

Predicting depinning dynamics of elastic interfaces by machine learning

Authors: Valtteri Haavisto, Marcin Mińkowski, Lasse Laurson

Abstract: Predicting the future behaviour of complex systems exhibiting critical-like dynamics is often considered to be an intrinsically hard task. Here, we study the predictability of the depinning dynamics of elastic interfaces in random media driven by a slowly increasing external force, a paradigmatic complex system exhibiting critical avalanche dynamics linked to a continuous non-equilibrium depinning… ▽ More Predicting the future behaviour of complex systems exhibiting critical-like dynamics is often considered to be an intrinsically hard task. Here, we study the predictability of the depinning dynamics of elastic interfaces in random media driven by a slowly increasing external force, a paradigmatic complex system exhibiting critical avalanche dynamics linked to a continuous non-equilibrium depinning phase transition. To this end, we train a variety of machine learning models to infer the map** from features of the initial relaxed line shape and the random pinning landscape to predict the sample-dependent staircase-like force-displacement curve that emerges from the depinning process. Even if for a given realization of the quenched random medium the dynamics are in principle deterministic, we find that there is an exponential decay of the predictability with the displacement of the line, quantifying how the system forgets its initial state as it nears the depinning transition from below. Our analysis on how the related displacement scale depends on the system size and the dimensionality of the input descriptor reveals that the onset of the depinning phase transition gives rise to fundamental limits to predictability. △ Less

Submitted 18 December, 2023; originally announced December 2023.

Comments: 12 pages, 13 figures

Barkhausen noise in disordered strip-like ferromagnets: experiment vs. simulations

Authors: Djordje Spasojevic, Milos Marinkovic, Dragutin Jovkovic, Sanja Janicevic, Lasse Laurson, Antonije Djordjevic

Abstract: In this paper, we compare the results obtained from the low-frequency Barkhausen noise recordings performed on a VITROPERM 800 metallic glass sample with the results from the numerical simulations of the Random Field Ising Model systems. We show that when the values of disorder and driving rates of the model systems are suitably chosen, a considerable matching with the experimental results is achi… ▽ More In this paper, we compare the results obtained from the low-frequency Barkhausen noise recordings performed on a VITROPERM 800 metallic glass sample with the results from the numerical simulations of the Random Field Ising Model systems. We show that when the values of disorder and driving rates of the model systems are suitably chosen, a considerable matching with the experimental results is achieved indicating that the model can reproduce a majority of the Barkhausen noise features. △ Less

Submitted 21 September, 2023; originally announced September 2023.

Predicting elastic and plastic properties of small iron polycrystals by machine learning

Authors: Marcin Mińkowski, Lasse Laurson

Abstract: Deformation of crystalline materials is an interesting example of complex system behaviour. Small samples typically exhibit a stochastic-like, irregular response to externally applied stresses, manifested as significant sample-to-sample variation in their mechanical properties. In this work we study the predictability of the sample-dependent shear moduli and yield stresses of a large set of small… ▽ More Deformation of crystalline materials is an interesting example of complex system behaviour. Small samples typically exhibit a stochastic-like, irregular response to externally applied stresses, manifested as significant sample-to-sample variation in their mechanical properties. In this work we study the predictability of the sample-dependent shear moduli and yield stresses of a large set of small cube-shaped iron polycrystals generated by Voronoi tesselation, by combining molecular dynamics simulations and machine learning. Training a convolutional neural network to infer the map** between the initial polycrystalline structure of the samples and features of the ensuing stress-strain curves reveals that the shear modulus can be predicted better than the yield stress. We discuss our results in the context of the sensitivity of the system's response to small perturbations of its initial state. △ Less

Submitted 21 August, 2023; v1 submitted 27 February, 2023; originally announced February 2023.

Journal ref: Sci. Rep. 13, 13977 (2023)

Bayesian optimization of discrete dislocation plasticity of two-dimensional precipitation hardened crystals

Authors: Mika Sarvilahti, Lasse Laurson

Abstract: Discovering relationships between materials' microstructures and mechanical properties is a key goal of materials science. Here, we outline a strategy exploiting Bayesian optimization to efficiently search the multidimensional space of microstructures, defined here by the size distribution of precipitates (fixed impurities or inclusions acting as obstacles for dislocation motion) within a simple t… ▽ More Discovering relationships between materials' microstructures and mechanical properties is a key goal of materials science. Here, we outline a strategy exploiting Bayesian optimization to efficiently search the multidimensional space of microstructures, defined here by the size distribution of precipitates (fixed impurities or inclusions acting as obstacles for dislocation motion) within a simple two-dimensional discrete dislocation dynamics model. The aim is to design a microstructure optimizing a given mechanical property, e.g., maximizing the expected value of shear stress for a given strain. The problem of finding the optimal discretized shape for a distribution involves a norm constraint, and we find that sampling the space of possible solutions should be done in a specific way in order to avoid convergence problems. To this end, we propose a general mathematical approach that can be used to generate trial solutions uniformly at random while enforcing an Euclidean norm constraint. Both equality and inequality constraints are considered. A simple technique can then be used to convert between Euclidean and other Lebesgue $p$-norm (the 1-norm in particular) constrained representations. Considering different dislocation-precipitate interaction potentials, we demonstrate the convergence of the algorithm to the optimal solution and discuss its possible extensions to the more complex and realistic case of three-dimensional dislocation systems where also the optimization of precipitate shapes could be considered. △ Less

Submitted 23 November, 2022; v1 submitted 5 October, 2022; originally announced October 2022.

Comments: 12 pages, 10 figures, accepted for publication in Physical Review Materials

Journal ref: Phys. Rev. Materials 6 (2022) 123801

Asymmetric Roughness of Elastic Interfaces at the Depinning Threshold

Authors: Esko Toivonen, Matti Molkkari, Esa Räsänen, Lasse Laurson

Abstract: Roughness of driven elastic interfaces in random media is typically understood to be characterized by a single roughness exponent $ζ$. We show that at the depinning threshold, due to symmetry breaking caused by the direction of the driving force, elastic interfaces with local, long-range and mean-field elasticity exhibit asymmetric roughness. It is manifested as a skewed distribution of the local… ▽ More Roughness of driven elastic interfaces in random media is typically understood to be characterized by a single roughness exponent $ζ$. We show that at the depinning threshold, due to symmetry breaking caused by the direction of the driving force, elastic interfaces with local, long-range and mean-field elasticity exhibit asymmetric roughness. It is manifested as a skewed distribution of the local interface heights, and can be quantified by using detrended fluctuation analysis to compute a spectrum of local, segment-level scaling exponents. The asymmetry is observed as approximately linear dependence of the local scaling exponents on the difference of the segment height from the mean interface height. △ Less

Submitted 23 September, 2022; originally announced September 2022.

Comments: 6 pages, 4 figures, Supplemental Material containing 3 pages, 4 figures

Journal ref: Phys. Rev. Lett. 129, 175701 (2022)

Barkhausen noise from formation of 360$^{\circ}$ domain walls in disordered permalloy thin films

Authors: Sami Kaappa, Lasse Laurson

Abstract: Barkhausen noise in disordered ferromagnets is typically understood to originate primarily from jerky field-driven motion of domain walls. We study the magnetization reversal process in disordered permalloy thin films using micromagnetic simulations, and find that the magnetization reversal process consists of gradual formation of immobile 360$^{\circ}$ domain walls via a sequence of localized mag… ▽ More Barkhausen noise in disordered ferromagnets is typically understood to originate primarily from jerky field-driven motion of domain walls. We study the magnetization reversal process in disordered permalloy thin films using micromagnetic simulations, and find that the magnetization reversal process consists of gradual formation of immobile 360$^{\circ}$ domain walls via a sequence of localized magnetization rotation events. The density of 360$^{\circ}$ domain walls formed within the sample as well as the statistical properties of the Barkhausen jumps are controlled by the disorder strength. △ Less

Submitted 6 March, 2023; v1 submitted 22 September, 2022; originally announced September 2022.

Avalanches and rate effects in strain-controlled discrete dislocation plasticity of Al single crystals

Authors: David Kurunczi-Papp, Lasse Laurson

Abstract: Three-dimensional discrete dislocation dynamics simulations are used to study strain-controlled plastic deformation of face-centered cubic aluminium single crystals. After describing the rate and size dependence of the average stress-strain curves, we study the power-law distributed strain bursts and the average avalanche shapes, and find a universal power-law exponent $τ\approx 1.0$ for all impos… ▽ More Three-dimensional discrete dislocation dynamics simulations are used to study strain-controlled plastic deformation of face-centered cubic aluminium single crystals. After describing the rate and size dependence of the average stress-strain curves, we study the power-law distributed strain bursts and the average avalanche shapes, and find a universal power-law exponent $τ\approx 1.0$ for all imposed strain rates and system sizes, characterizing both the event sizes and their durations. We discuss the dependence of our results on loading rate and compare these with previous studies of strain-controlled two-dimensional systems of discrete dislocations as well as of quasistatic stress-controlled loading of aluminium single crystals. △ Less

Submitted 25 January, 2023; v1 submitted 15 July, 2022; originally announced July 2022.

Comments: 7 pages, 6 figures, 39 citations

Journal ref: Phys. Rev. Materials 7, 013605 (2023)

Effect of thresholding on avalanches and their clustering for interfaces with long-range elasticity

Authors: Juha Savolainen, Lasse Laurson, Mikko Alava

Abstract: Avalanches are often defined as signals higher than some detection level in bursty systems. The choice of the detection threshold affects the number of avalanches, but it can also affect their temporal correlations. We simulated the depinning of a long-range elastic interface and applied different thresholds including a zero one on the data to see how the sizes and durations of events change and h… ▽ More Avalanches are often defined as signals higher than some detection level in bursty systems. The choice of the detection threshold affects the number of avalanches, but it can also affect their temporal correlations. We simulated the depinning of a long-range elastic interface and applied different thresholds including a zero one on the data to see how the sizes and durations of events change and how this affects temporal avalanche clustering. Higher thresholds result in steeper size and duration distributions and cause the avalanches to cluster temporally. Using methods from seismology, the frequency of the events in the clusters was found to decrease as a power-law of time, and the size of an event in a cluster was found to help predict how many events it is followed by. The results bring closer theoretical studies of this class of models to real experiments, but also highlight how different phenomena can be obtained from the same set of data. △ Less

Submitted 1 June, 2022; originally announced June 2022.

Comments: 8 pages, 8 figures

Journal ref: Phys. Rev. E, 105, 054152, 2022

Machine learning reveals strain-rate-dependent predictability of discrete dislocation plasticity

Authors: Marcin Mińkowski, David Kurunczi-Papp, Lasse Laurson

Abstract: Predicting the behaviour of complex systems is one of the main goals of science. An important example is plastic deformation of micron-scale crystals, a process mediated by collective dynamics of dislocations, manifested as broadly distributed strain bursts and significant sample-to-sample variations in the response to applied loading. Here, by combining large-scale discrete dislocation dynamics s… ▽ More Predicting the behaviour of complex systems is one of the main goals of science. An important example is plastic deformation of micron-scale crystals, a process mediated by collective dynamics of dislocations, manifested as broadly distributed strain bursts and significant sample-to-sample variations in the response to applied loading. Here, by combining large-scale discrete dislocation dynamics simulations and machine learning, we study the problem of predicting the fluctuating stress-strain curves of individual small single crystals subject to strain-controlled loading using features of the initial dislocation configurations as input. Our results reveal an intriguing rate dependence of deformation predictability: For small strains predictability improves with increasing strain rate, while for larger strains the predictability vs strain rate relation becomes non-monotonic. We show that for small strains the rate-dependence of deformation predictability can be captured by considering the fraction of dislocations moving against the direction imposed by the external stress, serving as a measure of strain-rate-dependent complexity of the dislocation dynamics. The non-monotonic predictability vs strain rate relation for large strains is argued to be related to a transition from fluctuating to smooth plastic flow when strain rate is increased. △ Less

Submitted 8 February, 2022; v1 submitted 14 November, 2021; originally announced November 2021.

Journal ref: Phys. Rev. Materials 6, 023602 (2022)

Depinning exponents of thin film domain walls depend on disorder strength

Authors: Audun Skaugen, Lasse Laurson

Abstract: Domain wall dynamics in ferromagnets is complicated by internal degrees of freedom of the domain walls. We develop a model of domain walls in disordered thin films with perpendicular magnetic anisotropy capturing such features, and use it to study the depinning transition. For weak disorder, excitations of the internal magnetization are rare, and the depinning transition takes on exponent values o… ▽ More Domain wall dynamics in ferromagnets is complicated by internal degrees of freedom of the domain walls. We develop a model of domain walls in disordered thin films with perpendicular magnetic anisotropy capturing such features, and use it to study the depinning transition. For weak disorder, excitations of the internal magnetization are rare, and the depinning transition takes on exponent values of the quenched Edwards-Wilkinson equation. Stronger disorder results in disorder-dependent exponents concurrently with nucleation of an increasing density of Bloch lines within the domain wall. △ Less

Submitted 7 March, 2022; v1 submitted 29 September, 2021; originally announced September 2021.

Comments: 5 pages, 5 figures

Journal ref: Phys. Rev. Lett. 128, 097202 (2022)

Dislocation avalanches from strain-controlled loading: A discrete dislocation dynamics study

Authors: David Kurunczi-Papp, Lasse Laurson

Abstract: We study strain-controlled plastic deformation of crystalline solids via two-dimensional discrete dislocation dynamics simulations. To this end, we characterize the average stress-strain curves as well as the statistical properties of strain bursts and the related stress drops as a function of the imposed strain rate and the stiffness of the specimen-machine system. The dislocation system exhibits… ▽ More We study strain-controlled plastic deformation of crystalline solids via two-dimensional discrete dislocation dynamics simulations. To this end, we characterize the average stress-strain curves as well as the statistical properties of strain bursts and the related stress drops as a function of the imposed strain rate and the stiffness of the specimen-machine system. The dislocation system exhibits strain rate sensitivity such that a larger imposed strain rate results in a higher average stress at a given strain. In the limit of small strain rate and driving spring stiffness, the sizes and durations of the dislocation avalanches are power-law distributed up to a cutoff scale, and exhibit temporally asymmetric average shapes. We discuss the dependence of the results on the driving parameters, and compare our results to those from previous simulations where quasistatic stress-controlled loading was used. △ Less

Submitted 6 August, 2021; originally announced August 2021.

Comments: 11 pages, 9 captioned figures

Journal ref: Phys. Rev. E 104, 025008 (2021)

Avalanche correlations and stress-strain curves in discrete dislocation plasticity

Authors: Henri Salmenjoki, Lasse Laurson, Mikko J. Alava

Abstract: The sequence of deformation bursts during plastic deformation exhibits scale-free features. In addition to the burst or avalanche sizes and the rate of avalanches the process is characterized by correlations in the series which become manifest in the resulting shape of the stress-strain curve. We analyze such features of plastic deformation with 2D and 3D simulations of discrete dislocation dynami… ▽ More The sequence of deformation bursts during plastic deformation exhibits scale-free features. In addition to the burst or avalanche sizes and the rate of avalanches the process is characterized by correlations in the series which become manifest in the resulting shape of the stress-strain curve. We analyze such features of plastic deformation with 2D and 3D simulations of discrete dislocation dynamics models and we show, that only with severe plastic deformation the ensuing memory effects become negligible. The role of past deformation history and dislocation pinning by disorder are studied. In general, the correlations have the effect of reducing the scatter of the individual stress-strain curves around the mean one. △ Less

Submitted 11 June, 2021; originally announced June 2021.

Comments: 9 pages, 9 figures. Submitted

Journal ref: Phys. Rev. Materials 5, 073601 (2021)

The effects of external noise on threshold induced correlations in ferromagnetic systems

Authors: Dragutin Jovkovic, Sanja Janicevic, Svetislav Mijatovic, Lasse Laurson, Djordje Spasojevic

Abstract: In the present paper we investigate the impact of the external noise and detection threshold level on the simulation data for the systems that evolve through metastable states. As a representative model of such systems we chose the nonequilibrium athermal random field Ising model with two types of the external noise, uniform white noise and Gaussian white noise with various different standard devi… ▽ More In the present paper we investigate the impact of the external noise and detection threshold level on the simulation data for the systems that evolve through metastable states. As a representative model of such systems we chose the nonequilibrium athermal random field Ising model with two types of the external noise, uniform white noise and Gaussian white noise with various different standard deviations, imposed on the original response signal obtained in model simulations. We applied a wide range of detection threshold levels in analysis of the signal and show how these quantities affect the values of exponent $γ_{S/T}$ (describing the scaling of the average avalanche size with duration), the shift of waiting time between the avalanches, and finally the collapses of the waiting time distributions. The results are obtained via extensive numerical simulations on the equilateral three-dimensional cubic lattices of various sizes and disorders. △ Less

Submitted 19 May, 2021; originally announced May 2021.

Comments: 13 pages, 15 figures

Propagating bands of plastic deformation in a metal alloy as critical avalanches

Authors: Tero Mäkinen, Pasi Karppinen, Markus Ovaska, Lasse Laurson, Mikko J. Alava

Abstract: The plastic deformation of metal alloys localizes in the Portevin--Le Chatelier effect in bands of different types, including propagating, or type 'A' bands, usually characterised by their width and a typical propagation velocity. This plastic instability arises from collective dynamics of dislocations interacting with mobile solute atoms but the resulting sensitivity to the strain-rate lacks fund… ▽ More The plastic deformation of metal alloys localizes in the Portevin--Le Chatelier effect in bands of different types, including propagating, or type 'A' bands, usually characterised by their width and a typical propagation velocity. This plastic instability arises from collective dynamics of dislocations interacting with mobile solute atoms but the resulting sensitivity to the strain-rate lacks fundamental understanding. Here we show, by employing high-resolution imaging in tensile deformation experiments of an aluminum alloy, that the band velocities exhibit large fluctuations. Each band produces a velocity signal reminiscent of crackling noise bursts observed in numerous driven avalanching systems from propagating cracks in fracture to the Barkhausen effect in ferromagnets. The statistical features of these velocity bursts including their average shapes and size distributions obey predictions of a simple mean-field model of critical avalanche dynamics. Our results thus reveal a novel paradigm of criticality in the localization of deformation. △ Less

Submitted 26 October, 2020; originally announced October 2020.

Journal ref: Science Advances 6(41), eabc7350 (2020)

Probing the transition from dislocation jamming to pinning by machine learning

Authors: Henri Salmenjoki, Lasse Laurson, Mikko J. Alava

Abstract: Collective motion of dislocations is governed by the obstacles they encounter. In pure crystals, dislocations form complex structures as they become jammed by their anisotropic shear stress fields. On the other hand, introducing disorder to the crystal causes dislocations to pin to these impeding elements and, thus, leads to a competition between dislocation-dislocation and dislocation-disorder in… ▽ More Collective motion of dislocations is governed by the obstacles they encounter. In pure crystals, dislocations form complex structures as they become jammed by their anisotropic shear stress fields. On the other hand, introducing disorder to the crystal causes dislocations to pin to these impeding elements and, thus, leads to a competition between dislocation-dislocation and dislocation-disorder interactions. Previous studies have shown that, depending on the dominating interaction, the mechanical response and the way the crystal yields change. Here we employ three-dimensional discrete dislocation dynamics simulations with varying density of fully coherent precipitates to study this phase transition $-$ from jamming to pinning $-$ using unsupervised machine learning. By constructing descriptors characterizing the evolving dislocation configurations during constant loading, a confusion algorithm is shown to be able to distinguish the systems into two separate phases. These phases agree well with the observed changes in the relaxation rate during the loading. Our results also give insights on the structure of the dislocation networks in the two phases. △ Less

Submitted 28 September, 2020; v1 submitted 25 September, 2020; originally announced September 2020.

Comments: 16 pages, 9 figures. Accepted for publication in Materials Theory

Plastic yielding and deformation bursts in the presence of disorder from coherent precipitates

Authors: Henri Salmenjoki, Arttu Lehtinen, Lasse Laurson, Mikko J. Alava

Abstract: Alloying metals with other elements is often done to improve the material strength or hardness. A key microscopic mechanism is precipitation hardening, where precipitates impede dislocation motion, but the role of such obstacles in determining the nature of collective dislocation dynamics remains to be understood. Here, three-dimensional discrete dislocation dynamics simulations of FCC single crys… ▽ More Alloying metals with other elements is often done to improve the material strength or hardness. A key microscopic mechanism is precipitation hardening, where precipitates impede dislocation motion, but the role of such obstacles in determining the nature of collective dislocation dynamics remains to be understood. Here, three-dimensional discrete dislocation dynamics simulations of FCC single crystals are performed with fully coherent spherical precipitates from zero precipitate density upto $ρ_p = 10^{21}\,\text{m}^{-3}$ and at various dislocation-precipitate interaction strengths. When the dislocation-precipitate interactions do not play a major role the yielding is qualitatively as for pure crystals, i.e., dominated by "dislocation jamming", resulting in glassy dislocation dynamics exhibiting critical features at any stress value. We demonstrate that increasing the precipitate density and/or the dislocation-precipitate interaction strength creates a true yield or dislocation assembly depinning transition, with a critical yield stress. This is clearly visible in the statistics of dislocation avalanches observed when quasistatically ram** up the external stress, and is also manifested in the response of the system to constant applied stresses. The scaling of the yielding with precipitates is discussed in terms of the Bacon-Kocks-Scattergood relation. △ Less

Submitted 9 July, 2020; originally announced July 2020.

Comments: 7 pages, 5 figures. Submitted to Physical Review Materials

Journal ref: Phys. Rev. Materials 4, 083602 (2020)

Machine learning depinning of dislocation pileups

Authors: Mika Sarvilahti, Audun Skaugen, Lasse Laurson

Abstract: We study a one-dimensional model of a dislocation pileup driven by an external stress and interacting with random quenched disorder, focusing on predictability of the plastic deformation process. Upon quasistatically ram** up the externally applied stress from zero the system responds by exhibiting an irregular stress--strain curve consisting of a sequence of strain bursts, i.e., critical-like d… ▽ More We study a one-dimensional model of a dislocation pileup driven by an external stress and interacting with random quenched disorder, focusing on predictability of the plastic deformation process. Upon quasistatically ram** up the externally applied stress from zero the system responds by exhibiting an irregular stress--strain curve consisting of a sequence of strain bursts, i.e., critical-like dislocation avalanches. The strain bursts are power-law distributed up to a cutoff scale which increases with the stress level up to a critical flow stress value. There, the system undergoes a depinning phase transition and the dislocations start moving indefinitely, i.e., the strain burst size diverges. Using sample-specific information about the pinning landscape as well as the initial dislocation configuration as input, we employ predictive models such as linear regression, simple neural networks and convolutional neural networks to study the predictability of the simulated stress--strain curves of individual samples. Our results show that the response of the system -- including the flow stress value -- can be predicted quite well, with the correlation coefficient between predicted and actual stress exhibiting a non-monotonic dependence on strain. We also discuss our attempts to predict the individual strain bursts. △ Less

Submitted 30 June, 2020; originally announced June 2020.

Comments: 10 pages, 10 figures

Journal ref: APL Mater. 8, 101109 (2020)

Machine learning plastic deformation of crystals

Authors: Henri Salmenjoki, Mikko J. Alava, Lasse Laurson

Abstract: Plastic deformation of micron-scale crystalline solids exhibits stress-strain curves with significant sample-to-sample variations. It is a pertinent question if this variability is purely random or to some extent predictable. Here we show, by employing machine learning techniques such as regression neural networks and support vector machines that deformation predictability evolves with strain and… ▽ More Plastic deformation of micron-scale crystalline solids exhibits stress-strain curves with significant sample-to-sample variations. It is a pertinent question if this variability is purely random or to some extent predictable. Here we show, by employing machine learning techniques such as regression neural networks and support vector machines that deformation predictability evolves with strain and crystal size. Using data from discrete dislocations dynamics simulations, the machine learning models are trained to infer the map** from features of the pre-existing dislocation configuration to the stress-strain curves. The predictability vs strain relation is non-monotonic and exhibits a system size effect: larger systems are more predictable. Stochastic deformation avalanches give rise to fundamental limits of deformation predictability for intermediate strains. However, the large-strain deformation dynamics of the samples can be predicted surprisingly well. △ Less

Submitted 30 January, 2020; originally announced January 2020.

Comments: Published version from https://www.nature.com/articles/s41467-018-07737-2. Supplementary material can also be found from the link

Journal ref: Nat Commun 9, 5307 (2018)

Entropy-driven impurity-induced nematic-isotropic transition of liquid crystals

Authors: Pritam Kumar Jana, Julien Lam, Nagma Parveen, Mikko J Alava, Lasse Laurson

Abstract: Phase behavior of liquid crystals is of long-standing interest due to numerous applications, with one of the key issues being how the presence of impurities affects the liquid crystalline order. Here we study the orientational order of 4-cyano-4$^{'}$-pentylbiphenyl (5CB) and 4-cyano-4$^{'}$-hexylbiphenyl (6CB) nematic liquid crystals in the presence of varying concentrations of water and n-hexane… ▽ More Phase behavior of liquid crystals is of long-standing interest due to numerous applications, with one of the key issues being how the presence of impurities affects the liquid crystalline order. Here we study the orientational order of 4-cyano-4$^{'}$-pentylbiphenyl (5CB) and 4-cyano-4$^{'}$-hexylbiphenyl (6CB) nematic liquid crystals in the presence of varying concentrations of water and n-hexane molecules serving as impurities, by carrying out both fully atomistic simulations and experiments. Our results reveal that mixing of the impurities (in case of hexane) with the host liquid crystals causes a nematic-to-isotropic phase transition with hexane concentration as the control parameter while demixing (in case of water) results in only weak impurity-induced perturbations to the nematic liquid-crystalline order. We develop a coarse-grained model illustrating the general nature and entropic origin of the mixing-induced phase transition. △ Less

Submitted 12 October, 2019; originally announced October 2019.

Analytical computation of the demagnetizing energy of thin film domain walls

Authors: Audun Skaugen, Peyton Murray, Lasse Laurson

Abstract: Due to its non-local nature, calculating the demagnetizing field remains the biggest challenge in understanding domain structures in ferromagnetic materials. Analytical descriptions of demagnetizing effects typically approximate domain walls as uniformly magnetized ellipsoids, neglecting both the smooth rotation of magnetization from one domain to the other and the interaction between the two doma… ▽ More Due to its non-local nature, calculating the demagnetizing field remains the biggest challenge in understanding domain structures in ferromagnetic materials. Analytical descriptions of demagnetizing effects typically approximate domain walls as uniformly magnetized ellipsoids, neglecting both the smooth rotation of magnetization from one domain to the other and the interaction between the two domains. Here, instead of the demagnetizing field, we compute analytically the demagnetizing energy of a straight domain wall described by the classical $\tanh$ magnetization profile in a thin film with perpendicular magnetic anisotropy. We then use our expression for the demagnetizing energy to derive an improved version of the 1D model of field-driven domain wall motion, resulting in accurate expressions for important properties of the domain wall such as the domain wall width and the Walker breakdown field. We verify the accuracy of our analytical results by micromagnetic simulations. △ Less

Submitted 12 September, 2019; v1 submitted 18 June, 2019; originally announced June 2019.

Comments: 11 pages, 7 figures

Journal ref: Phys. Rev. B 100, 094440 (2019)

Bursty magnetic friction between polycrystalline thin films with domain walls

Authors: Ilari Rissanen, Lasse Laurson

Abstract: Two magnets in relative motion interact through their dipolar fields, making individual magnetic moments dynamically adapt to the changes in the energy landscape and bringing about collective magnetization dynamics. Some of the energy of the system is irrevocably lost through various coupling mechanisms between the spin degrees of freedom and those of the underlying lattice, resulting in magnetic… ▽ More Two magnets in relative motion interact through their dipolar fields, making individual magnetic moments dynamically adapt to the changes in the energy landscape and bringing about collective magnetization dynamics. Some of the energy of the system is irrevocably lost through various coupling mechanisms between the spin degrees of freedom and those of the underlying lattice, resulting in magnetic friction. In this work, we use micromagnetic simulations to study magnetic friction in a system of two thin ferromagnetic films containing quenched disorder mimicking a polycrystalline structure. We observe bursts of magnetic activity resulting from repeated domain wall pinning due to the disorder and subsequent depinning triggered by the dipolar interaction between the moving films. These domain wall jumps result in strong energy dissipation peaks. We study how the properties of the polycrystalline structure such as grain size and strength of the disorder, along with the driving velocity and the width of the films, affect the magnetization dynamics, average energy dissipation as well as the statistical properties of the energy dissipation bursts. △ Less

Submitted 15 June, 2019; originally announced June 2019.

Comments: 10 pages, 10 figures

Journal ref: Phys. Rev. B 100, 144408 (2019)

Barkhausen noise from precessional domain wall motion

Authors: Touko Herranen, Lasse Laurson

Abstract: The jerky dynamics of domain walls driven by applied magnetic fields in disordered ferromagnets -- the Barkhausen effect -- is a paradigmatic example of crackling noise. We study Barkhausen noise in disordered Pt/Co/Pt thin films due to precessional motion of domain walls using full micromagnetic simulations, allowing for a detailed description of the domain wall internal structure. In this regime… ▽ More The jerky dynamics of domain walls driven by applied magnetic fields in disordered ferromagnets -- the Barkhausen effect -- is a paradigmatic example of crackling noise. We study Barkhausen noise in disordered Pt/Co/Pt thin films due to precessional motion of domain walls using full micromagnetic simulations, allowing for a detailed description of the domain wall internal structure. In this regime the domain walls contain topological defects known as Bloch lines which repeatedly nucleate, propagate and annihilate within the domain wall during the Barkhausen jumps. In addition to bursts of domain wall propagation, the in-plane Bloch line dynamics within the domain wall exhibits crackling noise, and constitutes the majority of the overall spin rotation activity. △ Less

Submitted 28 January, 2019; originally announced January 2019.

Comments: 5 pages, 5 figures

Journal ref: Phys. Rev. Lett. 122, 117205 (2019)

Nanoscale Liquid Crystal Lubrication Controlled by Surface Structure and Film Composition

Authors: Pritam Kumar Jana, Wei Chen, Mikko J. Alava, Lasse Laurson

Abstract: Liquid crystals have emerged as potential candidates for next-generation lubricants due to their tendency to exhibit long-range ordering. Here, we construct a full atomistic model of 4-cyano-4-hexylbiphenyl (6CB) nematic liquid crystal lubricants mixed with hexane and confined by mica surfaces. We explore the effect of the surface structure of mica, as well as lubricant composition and thickness,… ▽ More Liquid crystals have emerged as potential candidates for next-generation lubricants due to their tendency to exhibit long-range ordering. Here, we construct a full atomistic model of 4-cyano-4-hexylbiphenyl (6CB) nematic liquid crystal lubricants mixed with hexane and confined by mica surfaces. We explore the effect of the surface structure of mica, as well as lubricant composition and thickness, on the nanoscale friction in the system. Our results demonstrate the key role of the structure of the mica surfaces, specifically the positions of potassium ($\mathrm{K}^+$) ions, in determining the nature of sliding friction with monolayer lubricants, including the presence or absence of stick-slip dynamics. With the commensurate setup of confining surfaces, when the grooves created between the periodic $\mathrm{K}^+$ ions are parallel to the sliding direction we observe a lower friction force as compared to the perpendicular situation. Random positions of ions exhibit even smaller friction forces with respect to the previous two cases. For thicker lubrication layers the surface structure becomes less important and we observe a good agreement with the experimental data on bulk viscosity of 6CB and the additive hexane. In case of thicker lubrication layers, friction may still be controlled by tuning the relative concentrations of 6CB and hexane in the mixture. △ Less

Submitted 23 December, 2018; originally announced December 2018.

Journal ref: Phys. Chem. Chem. Phys., 2018,20, 18737-18743

Multistep Bloch-line-mediated Walker breakdown in ferromagnetic strips

Authors: Johanna Hütner, Touko Herranen, Lasse Laurson

Abstract: A well-known feature of magnetic field driven dynamics of domain walls in ferromagnets is the existence of a threshold driving force at which the internal magnetization of the domain wall starts to precess -- a phenomenon known as the Walker breakdown -- resulting in an abrupt drop of the domain wall propagation velocity. Here, we report on micromagnetic simulations of magnetic field driven domain… ▽ More A well-known feature of magnetic field driven dynamics of domain walls in ferromagnets is the existence of a threshold driving force at which the internal magnetization of the domain wall starts to precess -- a phenomenon known as the Walker breakdown -- resulting in an abrupt drop of the domain wall propagation velocity. Here, we report on micromagnetic simulations of magnetic field driven domain wall dynamics in thin ferromagnetic strips with perpendicular magnetic anisotropy which demonstrate that in wide enough strips Walker breakdown is a multistep process: It consists of several distinct velocity drops separated by short linear parts of the velocity vs field curve. These features originate from the repeated nucleation, propagation and annihilation of an increasing number of Bloch lines within the domain wall as the driving field magnitude is increased. This mechanism arises due to magnetostatic effects breaking the symmetry between the two ends of the domain wall. △ Less

Submitted 17 May, 2019; v1 submitted 6 December, 2018; originally announced December 2018.

Comments: 6 pages, 4 figures, to appear in Phys. Rev. B

Journal ref: Phys. Rev. B 99, 174427 (2019)

Magnetic non-contact friction from domain wall dynamics actuated by oscillatory mechanical motion

Authors: Ilari Rissanen, Lasse Laurson

Abstract: Magnetic friction is a form of non-contact friction arising from the dissipation of energy in a magnet due to spin reorientation in a magnetic field. In this paper we study magnetic friction in the context of micromagnetics, using our recent implementation of smooth spring-driven motion [Phys. Rev. E. 97, 053301 (2018)] to simulate ring-down measurements in two setups where domain wall dynamics is… ▽ More Magnetic friction is a form of non-contact friction arising from the dissipation of energy in a magnet due to spin reorientation in a magnetic field. In this paper we study magnetic friction in the context of micromagnetics, using our recent implementation of smooth spring-driven motion [Phys. Rev. E. 97, 053301 (2018)] to simulate ring-down measurements in two setups where domain wall dynamics is induced by mechanical motion. These include a single thin film with a domain wall in an external field and a setup mimicking a magnetic cantilever tip and substrate, in which the two magnets interact through dipolar interactions. We investigate how various micromagnetic parameters influence the domain wall dynamics actuated by the oscillatory spring-driven mechanical motion and the resulting dam** coefficient. Our simulations show that the magnitude of magnetic friction can be comparable to other forms of non-contact friction. For oscillation frequencies lower than those inducing excitations of the internal structure of the domain walls, the dam** coefficient is found to be independent of frequency. Hence, our results obtained in the frequency range from 8 to 112 MHz are expected to be relevant also for typical experimental setups operating in the 100 kHz range. △ Less

Submitted 17 May, 2019; v1 submitted 19 September, 2018; originally announced September 2018.

Comments: 19 pages, 8 figures

Mimicking complex dislocation dynamics by interaction networks

Authors: Henri Salmenjoki, Mikko J. Alava, Lasse Laurson

Abstract: Two-dimensional discrete dislocation models exhibit complex dynamics in relaxation and under external loading. This is manifested both in the time-dependent velocities of individual dislocations and in the ensemble response, the strain rate. Here we study how well this complexity may be reproduced using so-called Interaction Networks, an Artificial Intelligence method for learning the dynamics of… ▽ More Two-dimensional discrete dislocation models exhibit complex dynamics in relaxation and under external loading. This is manifested both in the time-dependent velocities of individual dislocations and in the ensemble response, the strain rate. Here we study how well this complexity may be reproduced using so-called Interaction Networks, an Artificial Intelligence method for learning the dynamics of complex interacting systems. We test how to learn such networks using creep data, and show results on reproducing individual and collective dislocation velocities. The quality of reproducing the interaction kernel is discussed. △ Less

Submitted 11 September, 2018; originally announced September 2018.

Journal ref: Eur. Phys. J. B, 91 11 (2018) 275

Moving magnets in a micromagnetic finite difference framework

Authors: Ilari Rissanen, Lasse Laurson

Abstract: We present a method and an implementation for smooth linear motion in a finite difference-based micromagnetic simulation code, to be used in simulating magnetic friction and other phenomena involving moving microscale magnets. Our aim is to accurately simulate the magnetization dynamics and relative motion of magnets while retaining high computational speed. To this end, we combine techniques for… ▽ More We present a method and an implementation for smooth linear motion in a finite difference-based micromagnetic simulation code, to be used in simulating magnetic friction and other phenomena involving moving microscale magnets. Our aim is to accurately simulate the magnetization dynamics and relative motion of magnets while retaining high computational speed. To this end, we combine techniques for fast scalar potential calculation and cubic b-spline interpolation, parallelizing them on a Graphics Processing Unit (GPU). The implementation also includes the possibility of explicitly simulating eddy currents in the case of conducting magnets. We test our implementation by providing numerical examples of stick-slip motion of thin films pulled by a spring and the effect of eddy currents on the switching time of magnetic nanocubes. △ Less

Submitted 3 May, 2018; v1 submitted 12 January, 2018; originally announced January 2018.

Comments: 9 pages, 7 figures

Journal ref: Phys. Rev. E 97, 053301 (2018)

Excitation spectra in crystal plasticity

Authors: Markus Ovaska, Arttu Lehtinen, Mikko J. Alava, Lasse Laurson, Stefano Zapperi

Abstract: Plastically deforming crystals exhibit scale-free fluctuations that are similar to those observed in driven disordered elastic systems close to depinning, but the nature of the yielding critical point is still debated. Here, we study the marginal stability of ensembles of dislocations and compute their excitation spectrum in two and three dimensions. Our results show the presence of a singularity… ▽ More Plastically deforming crystals exhibit scale-free fluctuations that are similar to those observed in driven disordered elastic systems close to depinning, but the nature of the yielding critical point is still debated. Here, we study the marginal stability of ensembles of dislocations and compute their excitation spectrum in two and three dimensions. Our results show the presence of a singularity in the distribution of {\it excitation stresses}, i.e., the stress needed to make a localized region unstable, that is remarkably similar to the one measured in amorphous plasticity and spin glasses. These results allow us to understand recent observations of extended criticality in bursty crystal plasticity and explain how they originate from the presence of a pseudogap in the excitation spectrum. △ Less

Submitted 1 December, 2017; originally announced December 2017.

Comments: 5 pages, 4 figures, to appear in Phys. Rev. Lett

Journal ref: Phys. Rev. Lett. 119, 265501 (2017)

Bloch line dynamics within moving domain walls in 3D ferromagnets

Authors: Touko Herranen, Lasse Laurson

Abstract: We study field-driven magnetic domain wall dynamics in garnet strips by large-scale three-dimensional micromagnetic simulations. The domain wall propagation velocity as a function of the applied field exhibits a low-field linear part terminated by a sudden velocity drop at a threshold field magnitude, related to the onset of excitations of internal degrees of freedom of the domain wall magnetizati… ▽ More We study field-driven magnetic domain wall dynamics in garnet strips by large-scale three-dimensional micromagnetic simulations. The domain wall propagation velocity as a function of the applied field exhibits a low-field linear part terminated by a sudden velocity drop at a threshold field magnitude, related to the onset of excitations of internal degrees of freedom of the domain wall magnetization. By considering a wide range of strip thicknesses from 30 nm to 1.89 $μ$m, we find a non-monotonic thickness dependence of the threshold field for the onset of this instability, proceeding via nucleation and propagation of Bloch lines within the domain wall. We identify a critical strip thickness above which the velocity drop is due to nucleation of horizontal Bloch lines, while for thinner strips and depending on the boundary conditions employed, either generation of vertical Bloch lines, or close-to-uniform precession of the domain wall internal magnetization takes place. For strips of intermediate thicknesses, the vertical Bloch lines assume a deformed structure due to demagnetizing fields at the strip surfaces, breaking the symmetry between the top and bottom faces of the strip, and resulting in circulating Bloch line dynamics along the perimeter of the domain wall. △ Less

Submitted 16 May, 2017; originally announced May 2017.

Comments: 8 pages, 5 figures

Journal ref: Phys. Rev. B 96, 144422 (2017)

Fast vortex wall motion in wide Permalloy strips from double switching of the vortex core

Authors: Virginia Estévez, Lasse Laurson

Abstract: We study vortex domain wall dynamics in wide Permalloy strips driven by applied magnetic fields and spin-polarized electric currents. As recently reported [V. Estévez and L. Laurson, Phys. Rev. B, 93, 064403 (2016)], for sufficiently wide strips and above a threshold field, periodic dynamics of the vortex core are localized in the vicinity of one of the strip edges, and the velocity drop typically… ▽ More We study vortex domain wall dynamics in wide Permalloy strips driven by applied magnetic fields and spin-polarized electric currents. As recently reported [V. Estévez and L. Laurson, Phys. Rev. B, 93, 064403 (2016)], for sufficiently wide strips and above a threshold field, periodic dynamics of the vortex core are localized in the vicinity of one of the strip edges, and the velocity drop typically observed for narrow strips is replaced by a high-velocity plateau. Here, we analyze this behavior in more detail by means of micromagnetic simulations. We show that the high-velocity plateau originates from a repeated double switching of the magnetic vortex core, underlying the periodic vortex core dynamics in the vicinity of the strip edge, i.e., the "attraction-repulsion" effect. We also discuss the corresponding dynamics driven by spin-polarized currents, as well as the effect of including quenched random structural disorder to the system. △ Less

Submitted 16 August, 2017; v1 submitted 20 January, 2017; originally announced January 2017.

Comments: 12 pages, 10 figures

Journal ref: Phys. Rev. B 96, 064420 (2017)

Inter-event correlations from avalanches hiding below the detection threshold

Authors: Sanja Janićević, Lasse Laurson, Knut Jørgen Måløy, Stéphane Santucci, Mikko J. Alava

Abstract: Numerous systems ranging from deformation of materials to earthquakes exhibit bursty dynamics, which consist of a sequence of events with a broad event size distribution. Very often these events are observed to be temporally correlated or clustered, evidenced by power-law distributed waiting times separating two consecutive activity bursts. We show how such inter-event correlations arise simply be… ▽ More Numerous systems ranging from deformation of materials to earthquakes exhibit bursty dynamics, which consist of a sequence of events with a broad event size distribution. Very often these events are observed to be temporally correlated or clustered, evidenced by power-law distributed waiting times separating two consecutive activity bursts. We show how such inter-event correlations arise simply because of a finite detection threshold, created by the limited sensitivity of the measurement apparatus, or used to subtract background activity or noise from the activity signal. Data from crack propagation experiments and numerical simulations of a non-equilibrium crack line model demonstrate how thresholding leads to correlated bursts of activity by separating the avalanche events into sub-avalanches. The resulting temporal sub-avalanche correlations are well-described by our general scaling description of thresholding-induced correlations in crackling noise. △ Less

Submitted 26 October, 2016; originally announced October 2016.

Comments: 6 pages, 4 figures, Supplemental Material as an ancillary file, accepted for publication in Phys. Rev. Lett

Journal ref: Phys. Rev. Lett. 117, 230601 (2016)

Coarsening dynamics of topological defects in thin Permalloy films

Authors: Ilari Rissanen, Lasse Laurson

Abstract: We study the dynamics of topological defects in the magnetic texture of rectangular Permalloy thin film elements during relaxation from random magnetization initial states. Our full micromagnetic simulations reveal complex defect dynamics during relaxation towards the stable Landau closure domain pattern, manifested as temporal power-law decay, with a system-size dependent cut-off time, of various… ▽ More We study the dynamics of topological defects in the magnetic texture of rectangular Permalloy thin film elements during relaxation from random magnetization initial states. Our full micromagnetic simulations reveal complex defect dynamics during relaxation towards the stable Landau closure domain pattern, manifested as temporal power-law decay, with a system-size dependent cut-off time, of various quantities. These include the energy density of the system, and the number densities of the different kinds of topological defects present in the system. The related power-law exponents assume non-trivial values, and are found to be different for the different defect types. The exponents are robust against a moderate increase in the Gilbert dam** constant and introduction of quenched structural disorder. We discuss details of the processes allowed by conservation of the winding number of the defects, underlying their complex coarsening dynamics. △ Less

Submitted 5 September, 2016; originally announced September 2016.

Comments: 10 pages, 13 figures

Journal ref: Phys. Rev. B 94, 144428 (2016)

Glassy features of crystal plasticity

Authors: Arttu Lehtinen, Giulio Costantini, Mikko J. Alava, Stefano Zapperi, Lasse Laurson

Abstract: Crystal plasticity occurs by deformation bursts due to the avalanche-like motion of dislocations. Here we perform extensive numerical simulations of a three-dimensional dislocation dynamics model under quasistatic stress-controlled loading. Our results show that avalanches are power-law distributed, and display peculiar stress and sample size dependence: The average avalanche size grows exponentia… ▽ More Crystal plasticity occurs by deformation bursts due to the avalanche-like motion of dislocations. Here we perform extensive numerical simulations of a three-dimensional dislocation dynamics model under quasistatic stress-controlled loading. Our results show that avalanches are power-law distributed, and display peculiar stress and sample size dependence: The average avalanche size grows exponentially with the applied stress, and the amount of slip increases with the system size. These results suggest that intermittent deformation processes in crystalline materials exhibit an extended critical-like phase in analogy to glassy systems, instead of originating from a non-equilibrium phase transition critical point. △ Less

Submitted 26 July, 2016; originally announced July 2016.

Comments: 6 pages, 4 figures, Supplemental Material as an ancillary file, accepted for publication in Phys. Rev. B

Multi-scale modeling of dislocation-precipitate interactions in Fe: from molecular dynamics to discrete dislocations

Authors: Arttu Lehtinen, Fredric Granberg, Lasse Laurson, Kai Nordlund, Mikko J. Alava

Abstract: The stress-driven motion of dislocations in crystalline solids, and thus the ensuing plastic deformation process, is greatly influenced by the presence or absence of various point-like defects such as precipitates or solute atoms. These defects act as obstacles for dislocation motion and hence affect the mechanical properties of the material. Here we combine molecular dynamics studies with three-d… ▽ More The stress-driven motion of dislocations in crystalline solids, and thus the ensuing plastic deformation process, is greatly influenced by the presence or absence of various point-like defects such as precipitates or solute atoms. These defects act as obstacles for dislocation motion and hence affect the mechanical properties of the material. Here we combine molecular dynamics studies with three-dimensional discrete dislocation dynamics simulations in order to model the interaction between different kinds of precipitates and a $\frac{1}{2}\langle 1 1 1\rangle$ $\{1 1 0\}$ edge dislocation in BCC iron. We have implemented immobile spherical precipitates into the ParaDis discrete dislocation dynamics code, with the dislocations interacting with the precipitates via a Gaussian potential, generating a normal force acting on the dislocation segments. The parameters used in the discrete dislocation dynamics simulations for the precipitate potential, the dislocation mobility, shear modulus and dislocation core energy are obtained from molecular dynamics simulations. We compare the critical stresses needed to unpin the dislocation from the precipitate in molecular dynamics and discrete dislocation dynamics simulations in order to fit the two methods together, and discuss the variety of the relevant pinning/depinning mechanisms. △ Less

Submitted 9 February, 2016; originally announced February 2016.

Journal ref: Phys.Rev.E 93, 013309, 2016

Magnetic domain-wall dynamics in wide permalloy strips

Authors: Virginia Estevez, Lasse Laurson

Abstract: Domain walls in soft permalloy strips may exhibit various equilibrium micromagnetic structures depending on the width and thickness of the strip, ranging from the well-known transverse and vortex walls in narrow and thin strips to double and triple vortex walls recently reported in wider strips [V. Estévez and L. Laurson, Phys. Rev. B {\bf 91}, 054407 (2015)]. Here we analyze the field driven dyna… ▽ More Domain walls in soft permalloy strips may exhibit various equilibrium micromagnetic structures depending on the width and thickness of the strip, ranging from the well-known transverse and vortex walls in narrow and thin strips to double and triple vortex walls recently reported in wider strips [V. Estévez and L. Laurson, Phys. Rev. B {\bf 91}, 054407 (2015)]. Here we analyze the field driven dynamics of such domain walls in permalloy strips of widths from 240 nm up to 6 $μ$m, using the known equilibrium domain wall structures as initial configurations. Our micromagnetic simulations show that the domain wall dynamics in wide strips is very complex, and depends strongly on the geometry of the system, as well as on the magnitude of the driving field. We discuss in detail the rich variety of the dynamical behaviors found, including dynamic transitions between different domain wall structures, periodic dynamics of a vortex core close to the strip edge, transitions towards simpler domain wall structures of the multi-vortex domain walls controlled by vortex polarity, and the fact that for some combinations of the strip geometry and the driving field the system cannot support a compact domain wall. △ Less

Submitted 29 January, 2016; originally announced January 2016.

Comments: 14 pages, 17 figures, accepted for publication in Phys. Rev. B

Journal ref: Phys. Rev. B 93, 064403 (2016)

Domain walls within domain walls in wide ferromagnetic strips

Authors: Touko Herranen, Lasse Laurson

Abstract: We carry out large-scale micromagnetic simulations which demonstrate that due to topological constraints, internal domain walls (Bloch lines) within extended domain walls are more robust than domain walls in nanowires. Thus, the possibility of spintronics applications based on their motion channeled along domain walls emerges. Internal domain walls are nucleated within domain walls in perpendicula… ▽ More We carry out large-scale micromagnetic simulations which demonstrate that due to topological constraints, internal domain walls (Bloch lines) within extended domain walls are more robust than domain walls in nanowires. Thus, the possibility of spintronics applications based on their motion channeled along domain walls emerges. Internal domain walls are nucleated within domain walls in perpendicularly magnetized media concurrent with a Walker breakdown-like abrupt reduction of the domain wall velocity above a threshold driving force, and may also be generated within pinned, localized domain walls. We observe fast field and current driven internal domain wall dynamics without a Walker breakdown along pinned domain walls, originating from topological protection of the internal domain wall structure due to the surrounding out-of-plane domains. △ Less

Submitted 13 August, 2015; originally announced August 2015.

Comments: 5 pages, 6 figures

Journal ref: Phys. Rev. B 92, 100405(R) (2015)

Osmotic stress affects functional properties of human melanoma cell lines

Authors: Caterina A. M. La Porta, Anna Ghilardi, Maria Pasini, Lasse Laurson, Mikko J. Alava, Stefano Zapperi, Martine Ben Amar

Abstract: Understanding the role of microenvironment in cancer growth and metastasis is a key issue for cancer research. Here, we study the effect of osmotic pressure on the functional properties of primary and metastatic melanoma cell lines. In particular, we experimentally quantify individual cell motility and transmigration capability. We then perform a circular scratch assay to study how a cancer cell f… ▽ More Understanding the role of microenvironment in cancer growth and metastasis is a key issue for cancer research. Here, we study the effect of osmotic pressure on the functional properties of primary and metastatic melanoma cell lines. In particular, we experimentally quantify individual cell motility and transmigration capability. We then perform a circular scratch assay to study how a cancer cell front invades an empty space. Our results show that primary melanoma cells are sensitive to a low osmotic pressure, while metastatic cells are less. To better understand the experimental results, we introduce and study a continuous model for the dynamics of a cell layer and a stochastic discrete model for cell proliferation and diffusion. The two models capture essential features of the experimental results and allow to make predictions for a wide range of experimentally measurable parameters. △ Less

Submitted 3 April, 2015; originally announced April 2015.

Journal ref: Eur. Phys. J. Plus (2015) 130: 64

Stick-Slip Control in Nanoscale Boundary Lubrication by Surface Wettability

Authors: Wei Chen, Adam S. Foster, Mikko J. Alava, Lasse Laurson

Abstract: We study the effect of atomic scale surface-lubricant interactions on nanoscale boundary-lubricated friction, by considering two example surfaces - hydrophilic mica and hydrophobic graphene - confining thin layers of water in molecular dynamics simulations. We observe stick-slip dynamics for thin water films confined by mica sheets, involving periodic breaking-reforming transitions of atomic scale… ▽ More We study the effect of atomic scale surface-lubricant interactions on nanoscale boundary-lubricated friction, by considering two example surfaces - hydrophilic mica and hydrophobic graphene - confining thin layers of water in molecular dynamics simulations. We observe stick-slip dynamics for thin water films confined by mica sheets, involving periodic breaking-reforming transitions of atomic scale capillary water bridges formed around the potassium ions of mica. However, only smooth sliding without stick-slip events is observed for water confined by graphene, as well as for thicker water layers confined by mica. Thus, our results illustrate how atomic scale details affect the wettability of the confining surfaces, and consequently control the presence or absence of stick-slip dynamics in nanoscale friction. △ Less

Submitted 13 February, 2015; originally announced February 2015.

Comments: 5 pages, 5 figures, accepted for publication in Phys. Rev. Lett

Journal ref: Phys. Rev. Lett. 114, 095502 (2015)

Head-to-Head Domain Wall Structures in Wide Permalloy Strips

Authors: Virginia Estevez, Lasse Laurson

Abstract: We analyze the equilibrium micromagnetic domain wall structures encountered in Permalloy strips of a wide range of thicknesses and widths, with strip widths up to several micrometers. By performing an extensive set of micromagnetic simulations, we show that the equilibrium phase diagram of the domain wall structures exhibits in addition to the previously found structures (symmetric and asymmetric… ▽ More We analyze the equilibrium micromagnetic domain wall structures encountered in Permalloy strips of a wide range of thicknesses and widths, with strip widths up to several micrometers. By performing an extensive set of micromagnetic simulations, we show that the equilibrium phase diagram of the domain wall structures exhibits in addition to the previously found structures (symmetric and asymmetric transverse walls, vortex wall) also double vortex and triple vortex domain walls for large enough strip widths and thicknesses. Also several metastable domain wall structures are found for wide and/or thick strips. We discuss the details of the relaxation process from random magnetization initial states towards the stable domain wall structure, and show that our results are robust with respect to changes of e.g. the magnitude of the Gilbert dam** constant and details of the initial conditions. △ Less

Submitted 30 January, 2015; originally announced January 2015.

Comments: 6 pages, 6 figures, accepted in PRB

Journal ref: Phys. Rev. B 91, 054407 (2015)

Quenched pinning and collective dislocation dynamics

Authors: Markus Ovaska, Lasse Laurson, Mikko J. Alava

Abstract: Several experiments show that crystalline solids deform in a bursty and intermittent fashion. Power-law distributed strain bursts in compression experiments of micron-sized samples, and acoustic emission energies from larger-scale specimens, are the key signatures of the underlying critical-like collective dislocation dynamics - a phenomenon that has also been seen in discrete dislocation dynamics… ▽ More Several experiments show that crystalline solids deform in a bursty and intermittent fashion. Power-law distributed strain bursts in compression experiments of micron-sized samples, and acoustic emission energies from larger-scale specimens, are the key signatures of the underlying critical-like collective dislocation dynamics - a phenomenon that has also been seen in discrete dislocation dynamics (DDD) simulations. Here we show, by performing large-scale two-dimensional DDD simulations, that the character of the dislocation avalanche dynamics changes upon addition of sufficiently strong randomly distributed quenched pinning centres, present e.g. in many alloys as immobile solute atoms. For intermediate pinning strength, our results adhere to the scaling picture of depinning transitions, in contrast to pure systems where dislocation jamming dominates the avalanche dynamics. Still stronger disorder quenches the critical behaviour entirely. △ Less

Submitted 1 June, 2015; v1 submitted 24 January, 2014; originally announced January 2014.

Comments: 16 pages, 5 figures

Journal ref: Scientific Reports 5, 10580 (2015)

Electric field driven magnetic domain wall motion in ferromagnetic-ferroelectric heterostructures

Authors: Ben Van de Wiele, Lasse Laurson, Kévin Franke, Sebastiaan van Dijken

Abstract: We investigate magnetic domain wall (MDW) dynamics induced by applied electric fields in ferromagnetic-ferroelectric thin-film heterostructures. In contrast to conventional driving mechanisms where MDW motion is induced directly by magnetic fields or electric currents, MDW motion arises here as a result of strong pinning of MDWs onto ferroelectric domain walls (FDWs) via local strain coupling. By… ▽ More We investigate magnetic domain wall (MDW) dynamics induced by applied electric fields in ferromagnetic-ferroelectric thin-film heterostructures. In contrast to conventional driving mechanisms where MDW motion is induced directly by magnetic fields or electric currents, MDW motion arises here as a result of strong pinning of MDWs onto ferroelectric domain walls (FDWs) via local strain coupling. By performing extensive micromagnetic simulations, we find several dynamical regimes, including instabilities such as spin wave emission and complex transformations of the MDW structure. In all cases, the time-averaged MDW velocity equals that of the FDW, indicating the absence of Walker breakdown. △ Less

Submitted 16 January, 2014; originally announced January 2014.

Comments: 5 pages, 3 figures

Journal ref: Applied Physics Letters 104, 012401 (2014)

Avalanches in 2D Dislocation Systems: Plastic Yielding is not Depinning

Authors: Péter Dusán Ispánovity, Lasse Laurson, Michael Zaiser, István Groma, Stefano Zapperi, Mikko J. Alava

Abstract: We study the properties of strain bursts (dislocation avalanches) occurring in two-dimensional discrete dislocation dynamics models under quasistatic stress-controlled loading. Contrary to previous suggestions, the avalanche statistics differs fundamentally from predictions obtained for the depinning of elastic manifolds in quenched random media. Instead, we find an exponent τ=1 of the power-law d… ▽ More We study the properties of strain bursts (dislocation avalanches) occurring in two-dimensional discrete dislocation dynamics models under quasistatic stress-controlled loading. Contrary to previous suggestions, the avalanche statistics differs fundamentally from predictions obtained for the depinning of elastic manifolds in quenched random media. Instead, we find an exponent τ=1 of the power-law distribution of slip or released energy, with a cut-off that increases exponentially with the applied stress and diverges with system size at all stresses. These observations demonstrate that the avalanche dynamics of 2D dislocation systems is scale-free at every applied stress and, therefore, can not be envisaged in terms of critical behavior associated with a depinning transition. △ Less

Submitted 12 July, 2013; originally announced July 2013.

Comments: 6 pages, 4 figures

Universality classes and crossover scaling of Barkhausen noise in thin films

Authors: Lasse Laurson, Gianfranco Durin, Stefano Zapperi

Abstract: We study the dynamics of head-to-head domain walls separating in-plane domains in a disordered ferromagnetic thin film. The competition between the domain wall surface tension and dipolar interactions induces a crossover between a rough domain wall phase at short length-scales and a large-scale phase where the walls display a zigzag morphology. The two phases are characterized by different critica… ▽ More We study the dynamics of head-to-head domain walls separating in-plane domains in a disordered ferromagnetic thin film. The competition between the domain wall surface tension and dipolar interactions induces a crossover between a rough domain wall phase at short length-scales and a large-scale phase where the walls display a zigzag morphology. The two phases are characterized by different critical exponents for Barkhausen avalanche dynamics that are in quantitative agreement with experimental measurements on MnAs thin films. △ Less

Submitted 25 June, 2013; originally announced June 2013.

Comments: 5 pages, 5 figures

Journal ref: Phys. Rev. B 89, 104402 (2014)

Influence of material defects on current-driven vortex domain wall mobility

Authors: J. Leliaert, B. Van de Wiele, A. Vansteenkiste, L. Laurson, G. Durin, L. Dupré, B. Van Waeyenberge

Abstract: Many future concepts for spintronic devices are based on the current-driven motion of magnetic domain walls through nanowires. Consequently a thorough understanding of the domain wall mobility is required. However, the magnitude of the nonadiabatic component of the spin-transfer torque driving the domain wall is still debated today as various experimental methods give rise to a large range of valu… ▽ More Many future concepts for spintronic devices are based on the current-driven motion of magnetic domain walls through nanowires. Consequently a thorough understanding of the domain wall mobility is required. However, the magnitude of the nonadiabatic component of the spin-transfer torque driving the domain wall is still debated today as various experimental methods give rise to a large range of values for the degree of nonadiabaticity. Strikingly, experiments based on vortex domain wall motion in magnetic nanowires consistently result in lower values compared to other methods. Based on the micromagnetic simulations presented in this contribution we can attribute this discrepancy to the influence of distributed disorder which vastly affects the vortex domain wall mobility, but is most often not taken into account in the models adopted to extract the degree of nonadiabaticity. △ Less

Submitted 6 March, 2014; v1 submitted 4 June, 2013; originally announced June 2013.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. B 89, 064419 (2014)

The effect of disorder on transverse domain wall dynamics in magnetic nanostrips

Authors: Ben Van de Wiele, Lasse Laurson, Gianfranco Durin

Abstract: We study the effect of disorder on the dynamics of a transverse domain wall in ferromagnetic nanostrips, driven either by magnetic fields or spin-polarized currents, by performing a large ensemble of GPU-accelerated micromagnetic simulations. Disorder is modeled by including small, randomly distributed non-magnetic voids in the system. Studying the domain wall velocity as a function of the applied… ▽ More We study the effect of disorder on the dynamics of a transverse domain wall in ferromagnetic nanostrips, driven either by magnetic fields or spin-polarized currents, by performing a large ensemble of GPU-accelerated micromagnetic simulations. Disorder is modeled by including small, randomly distributed non-magnetic voids in the system. Studying the domain wall velocity as a function of the applied field and current density reveals fundamental differences in the domain wall dynamics induced by these two modes of driving: For the field-driven case, we identify two different domain wall pinning mechanisms, operating below and above the Walker breakdown, respectively, whereas for the current-driven case pinning is absent above the Walker breakdown. Increasing the disorder strength induces a larger Walker breakdown field and current, and leads to decreased and increased domain wall velocities at the breakdown field and current, respectively. Furthermore, for adiabatic spin transfer torque, the intrinsic pinning mechanism is found to be suppressed by disorder. We explain these findings within the one-dimensional model in terms of an effective dam** parameter $α^*$ increasing with the disorder strength. △ Less

Submitted 24 September, 2012; originally announced September 2012.

Comments: 5 pages, 3 figures

Journal ref: Phys. Rev. B 86, 144415 (2012)

Dynamic hysteresis in cyclic deformation of crystalline solids

Authors: Lasse Laurson, Mikko J. Alava

Abstract: The hysteresis or internal friction in the deformation of crystalline solids stressed cyclically is studied from the viewpoint of collective dislocation dynamics. Stress-controlled simulations of a dislocation dynamics model at various loading frequencies and amplitudes are performed to study the stress - strain rate hysteresis. The hysteresis loop areas exhibit a maximum at a characteristic frequ… ▽ More The hysteresis or internal friction in the deformation of crystalline solids stressed cyclically is studied from the viewpoint of collective dislocation dynamics. Stress-controlled simulations of a dislocation dynamics model at various loading frequencies and amplitudes are performed to study the stress - strain rate hysteresis. The hysteresis loop areas exhibit a maximum at a characteristic frequency and a power law frequency dependence in the low frequency limit, with the power law exponent exhibiting two regimes, corresponding to the jammed and the yielding/moving phases of the system, respectively. The first of these phases exhibits non-trivial critical-like viscoelastic dynamics, crossing over to intermittent viscoplastic deformation for higher stress amplitudes. △ Less

Submitted 10 September, 2012; originally announced September 2012.

Comments: 5 pages, 4 figures, to appear in Physical Review Letters

Journal ref: Phys. Rev. Lett 109, 155504 (2012)

Spatial fluctuations in transient creep deformation

Authors: Lasse Laurson, Jari Rosti, Juha Koivisto, Amandine Miksic, Mikko J. Alava

Abstract: We study the spatial fluctuations of transient creep deformation of materials as a function of time, both by Digital Image Correlation (DIC) measurements of paper samples and by numerical simulations of a crystal plasticity or discrete dislocation dynamics model. This model has a jamming or yielding phase transition, around which power-law or Andrade creep is found. During primary creep, the relat… ▽ More We study the spatial fluctuations of transient creep deformation of materials as a function of time, both by Digital Image Correlation (DIC) measurements of paper samples and by numerical simulations of a crystal plasticity or discrete dislocation dynamics model. This model has a jamming or yielding phase transition, around which power-law or Andrade creep is found. During primary creep, the relative strength of the strain rate fluctuations increases with time in both cases - the spatially averaged creep rate obeys the Andrade law $ε_t \sim t^{-0.7}$, while the time dependence of the spatial fluctuations of the local creep rates is given by $Δε_t \sim t^{-0.5}$. A similar scaling for the fluctuations is found in the logarithmic creep regime that is typically observed for lower applied stresses. We review briefly some classical theories of Andrade creep from the point of view of such spatial fluctuations. We consider these phenomenological, time-dependent creep laws in terms of a description based on a non-equilibrium phase transition separating evolving and frozen states of the system when the externally applied load is varied. Such an interpretation is discussed further by the data collapse of the local deformations in the spirit of absorbing state/depinning phase transitions, as well as deformation-deformation correlations and the width of the cumulative strain distributions. The results are also compared with the order parameter fluctuations observed close to the depinning transition of the 2$d$ Linear Interface Model or the quenched Edwards-Wilkinson equation. △ Less

Submitted 2 May, 2011; originally announced May 2011.

Comments: 27 pages, 18 figures

Journal ref: J. Stat. Mech. (2011) P07002

Roughness and multiscaling of planar crack fronts

Authors: Lasse Laurson, Stefano Zapperi

Abstract: We consider numerically the roughness of a planar crack front within the long-range elastic string model, with a tunable disorder correlation length $ξ$. The problem is shown to have two important length scales, $ξ$ and the Larkin length $L_c$. Multiscaling of the crack front is observed for scales below $ξ$, provided that the disorder is strong enough. The asymptotic scaling with a roughness expo… ▽ More We consider numerically the roughness of a planar crack front within the long-range elastic string model, with a tunable disorder correlation length $ξ$. The problem is shown to have two important length scales, $ξ$ and the Larkin length $L_c$. Multiscaling of the crack front is observed for scales below $ξ$, provided that the disorder is strong enough. The asymptotic scaling with a roughness exponent $ζ\approx 0.39$ is recovered for scales larger than both $ξ$ and $L_c$. If $L_c > ξ$, these regimes are separated by a third regime characterized by the Larkin exponent $ζ_L \approx 0.5$. We discuss the experimental implications of our results. △ Less

Submitted 30 September, 2010; originally announced September 2010.

Comments: 8 pages, two figures

Journal ref: J. Stat. Mech. (2010) P11014